It works great, it looks great. I been having for many years, and never gave me any problems. I do love nice microwaves and Whirlpool is a great. I would recommend it to anyone that is interested.

I had the first microwave for 6 years. My husband messed it up so got a new one, same over the stove type. It has lots of programs. Its a rather large microwave, plus it has a steamer which cooks vegetables with steam while I am doing the rest of the meal and whats more important is its quiet. The site is fantastic not just in width but in depth. The best thing about this microwave too is that it has a frozen cycle which does not partially cook the food like most microwaves and the defrost is the same, it does not partially cook it actually defrosts completely without cooking it. This is by far the best microwave I have ever had, and I wouldnt want any other brand. It might cost a little more than the usual brands but its worth it. I also have a mini Whirlpool on my Countertop for my grandchild to use so he keeps away from stovetop at all times.

We purchased our Whirlpool french door refrigerator with bottom freezer from Lowes. A few months after purchasing, we noticed a pool of water on the floor, resulting from what looked like a leak coming from the ice maker. After contacting customer service, they sent a repair company to service the fridge. This rep stayed no longer than 5 minutes and barely looked at the appliance. He said my refrigerator was not under warranty, which was **, as I personally registered the refrigerator the day it was. My kitchen floor is ruined as a result. I will NEVER purchase another product from this company again. They seemingly left a faulty product on the market and failed to inform me about the known issue. Then they failed to quickly provide needed repair or replacement in a timely manner. They also refuse to reimburse me for the food loss, which would not have ever occurred had they handled the issue appropriately from the beginning. TERRIBLE company. In addition, since Lowes is aware of the reputation of this company and continue to sell their defective products... I will not be shopping at Lowes anymore! Both this companies should NOT be in business!!!

Friends and family dont you ever dare to buy a refrigerator from Whirlpool - Best Buy!!! They sold me a defect refrigerator and after 2 months begging to see a technician, they are telling me that they are going to fix it. Im so tired of them trying to fix it. Theyve been here 4 times with no luck. All my food is rotten and frozen. And its a new refrigerator. Gosh. As you can see, the water in the plastic cup that I left in my refrigerator are frozen which is not supposed to happen. I feel that Im dealing with nonsense. They dont care. They just took my money and thats it. Im left with a new defect refrigerator that doesnt work. Ridiculous.

There is a chronic and well-known problem with recent French door, bottom freezer refrigerators sold by Whirlpool, including the the brand names KitchenAid, Jenn-Air, Maytag, and Amana. The problem is caused when the defrost drain freezes, preventing defrosted water from reaching the evaporation pan. After enough water builds up, it overflows along the front of the refrigerator. In my particular case, we have wood floors and they were ruined by the water. After doing some investigation on the internet, I have learned that this problem affected approximately 1,500 model numbers sold under these names. These model numbers are listed in a Technical Service Pointer issued by Whirlpool.In August 2013, after experiencing several years of problems with these units, Whirlpool issued a Technical Service Pointer W10632338, advising service technicians that a new P Trap drain tube kit was now available, and suggesting that the defective duck bill check valve should be replaced by this new part. The problem for years had been that the rubber duck bill check valve would, over time, become sticky (or tacky) and would then not open - causing water to build up above it. Eventually, the water would freeze and since newly defrosted water could no longer escape, it would build up and eventually overflow.From what Ive seen online, plus a conversation with the Sears technician who come out to diagnose and repair my leak, I am convinced there are many thousands of customers who have experienced this problem. Because it takes a while for the rubber check valve to become sticky and no longer open, it is not uncommon for the problem to not appear until after the standard one-year warranty has expired. From reports, Whirlpool has sometimes acknowledged the problem and effected repair of refrigerators no longer under warranty.But what about those customers, like me, who have experienced water damage to floors and cabinets? Shouldnt Whirlpool be liable for those repairs, too? Id be interested to know if anyone knows of plans for a class action lawsuit.

Doesnt clean unless you prewash (by hand). Top rack unstable, falls off runner easily. Level of liquid indicator on rinse aid container broke so I cant tell how much is in it. Main door spring doesnt work so that you cant open door halfway. It flops all the way open. Very ordinary features and I dont use the dry feature. Nothing to praise here. Size is adequate for my needs. However, the bottom section where plates go isnt well designed. Dishes dont fit well. You cant put the plates in a line but there are space left over on the side thats wasted. This is the worst dishwasher I ever had. They seem to get flimsier all the time.

We purchased the Whirlpool Duet (front loader) washer and dryer in 2005 from Best Buy. We had many problems with the washer leaking around the front door. After several visits, Best Buy (in 2007) said we could pick out a new washer. We picked out the Whirlpool Cabrio. About 2 years later the mother board had to be replaced on the Cabrio. We are constantly getting F codes and have to unplug the washer several times for it to reset. It also sounds like a plane getting ready to take off and from what I read that repair is very costly. It has been leaking as well. I contacted Whirlpool today and they informed me that there was no recall on the machine and when I told them that there were many complaints for the same issues online, they said they do not base their recalls on blogs and to fix the problem, I would have to incur the cost. This machine is the biggest piece of junk that I have ever owned. I will be sure not purchase a Whirlpool in the future!

We purchased a Whirlpool Cabrio about 3 years ago. Have never really like it. It doesnt add enough water to the wash cycle unless you use the bulky setting, which fills the tub up the entire way, so wastes water. It would have been nice to choose your water level like you could on the old machines. Now it wont drain completely and wont spin totally. Ive tried using the drain/spin cycle 2-3 times extra and it still wont spin all the water out. Ive noticed that there is still water in the drum, you can hear it slosh when you move the drum, so I wonder - has anyone ever been told there is a filter in there somewhere that might be clogged keeping it from draining completely? My husband thinks that maybe all the water in the bottom of the drum is not letting it spin because its throwing it off balance. And yes, it stops before the cycle is complete and just sits there and blinks and you have to unplug it to clear the cycle. What a pain. We will never again buy a Whirlpool and I absolutely do not recommend Whirlpool washers. I have a Maytag as well and have not yet had problems with it. Bought it at the same time we bought the Cabrio (2 households). At least the water levels in the Maytag are a little more normal. You can wash more than 1 pair of jeans and get them clean in the Maytag. For those of you with the problem of the clothes not smelling clean - try running the clean cycle with a cup of bleach about once a week. No clothes in it - just a cup of bleach in the bleach dispenser and nothing else. Works for us.

Bought a $2500.00 fridge in Dec. 2012. By July, we were dealing with our 4th repair. Customer service in warranty department is non-existent. They act like you are a bother and have no right to demand replacement. I sent an email. No response. I wrote a letter to Corporate. No response. Not until I made comments on Facebook. Then I get a call offering me an extended warranty (which I already had purchased) so they said they would give another year (total of 3). This was a few weeks ago. I still have yet to receive anything or hear anything. This morning, our fridge is on the fritz again. I am loathe to have to deal with them again, but have no choice. Its either deal with them or throw out the 8 month old unit and buy something else. I should not even have to consider that. Whirlpool is a huge company. I do not understand their reluctance to just replace a product that is obviously defective unless they have no confidence in a replacement unit. This is so frustrating and upsetting to me. I did my research. I thought I was getting a quality product from a quality company. What a disappointment.

Water filtration unit was leaking only when someone got water. It pooled into the bottom of fridge and ran out under the fridge and because of the slope of the floor was running back towards the wall. We didnt notice until our laminate wood flooring was starting to swell up. It was probably leaking since the day we bought fridge brand new, but took us 4 months to notice. Whirlpool said they will not fix our flooring, only the fridge. We had to make a homeowners claim which we did. When the contractor moved the fridge back after replacing all flooring it starting leaking from the ice maker unit. Only when the ice tray filled it would gush out water. Our flooring is now ruined a 2nd time and Whirlpool will not fix the floor. Repairman said that Whirlpool used rigid parts in the water and ice maker units and tons of people are having the same problem. Since there is no flexibility in these parts they break when the fridge is moved. Whirlpool sucks and I am fighting with them and Lowes to get this fridge replaced with a non Whirlpool appliance. I will never buy Whirlpool again.

I purchased my Cabrio washer from Lowes 4 years ago. I noticed the smell and researched issues online. Suggested using the cleaners made for tubs. Im tired of the smell. I had repairman tear apart the washer. He told me they put water in the tub for balancing. Really... the tub is made of plastic. Will never buy anything Whirlpool again.

Im on Whirlpool Cabrio washer top number 4. Well over $300.00 each, and washer doesnt work with a broken top. I sent a letter to Whirlpool telling them, NEVER again Whirlpool and my reason is the 4th top in 6 years. I received a form letter back... apologizing for a delay in response and, we hope you enjoy the rest of your day, lol. They dont get my level of dissatisfaction or better just dont care. Never again Whirlpool.If you search Cabrio Washer tops you can see thousands of dissatisfied customers... and still Whirlpool has the arrogance to say, occasionally failures do occur, but we can not explain. Really is your engineering that bad? A high school kid could figure out that the spring is to strong for the plastic housing and over time the plastic cracks. Really Whirlpool? A multi billion dollar company? Never again Whirlpool.

It is my belief that through my experience that most Gas Range manufacturers mainly Whirlpool corporation purposely designs the stove igniter part to fail in 5-10 years. They do this in hope the consumer will purchase a new stove. The igniter in my stove has failed 6 times since I purchased it in 2005. I have had to replace it at my expense each time. The last time it failed, I asked Whirlpool if they would do a good faith gesture and replace it. They very rudely refused. I will never purchase another Whirlpool appliance again and encourage others to follow me. If they give me this much grief over a simple good faith gesture, I can only imagine the difficulties in getting them to honor a warranty claim!

Amongst all other items listed in these reviews (especially the tangling and twisting of clothes literally into knots), my guess is that is one way to ensure they are drier when they come out, wring them into knots... So now the pizza is slinging grease/oil all over the floor and water is leaking out from the bottom as well to make a perfect conglomeration of ** all over my tile. There is always more than one way to take care of the employees, hire sales people full of **, and technicians who know what the hell to do to fix it, with previous full of ** sales experience so consumers can buy more Whirlpool parts...

The salesperson was great but we are not happy with our washer. We already had it swapped out once because of white spots showing up on our clothes. The only thing they could think of was that the bleach I used wasnt rinsing out completely so it showed up on our clothes. Recently, I washed a table runner by itself and it had some red in it. Now there are red spots on a couple of items that I washed after the runner. My husband just now asked why there were red spots on a shirt that he wears all the time. I explained. Also, we have had some white spots on clothes and I could scratch it out without leaving a permanent mark. Were no longer using bleach and we use only liquid detergent and all of it is HE. So I dont understand the machine. I hate it.

I had a kitchen fire in 1999. All appliances were replaced with Stainless Steel Whirlpool. My old fridge was an 18 y.o. Whirlpool and still works fine in the garage. My old above range microwave was 12 y.o. and worked fine, I should have kept it. I had to replace my new Whirlpool Microwave after 4 years and 4 repairs. (Main Power Diode kept failing). Now my Whirlpool Gold fridge is not defrosting, even the freezer light switch is frozen. This French door freezer also seems to have less capacity than my old upright freezer. The retailer seemed sympathetic and pathetic. They would not budge on repairs. I told the contractor that did the rehab on my house what happened, he said he would stay away from Whirlpool and that retailer.

Purchased Whirlpool washing machine two years ago but transformed into junk within two years. Fraud company only searching ways to loot the money of the innocent customers and manufacturing such appliances which greasing mentally.

Bought new Whirlpool duet washer 4.0 couple years ago. Started making load noise. Started checking and its the rear bearing and sounds of it will cost more to replace than to buy a new one. Found this page and after reading review after review, I will not spend a dime to fix the junk product from Whirlpool. Going to put in the dumpster and never buy another Whirlpool product. I have never seen so many complaints about a product and many being the same bearing problem. Where is our recall process? Its ok to rip off people over and over with no consequence. And why do large chains keep their product? Guess theyre in on the rip off.

Whirlpool Duet - Steam cycle and sanitize on wash. Dryer is fast and automatic cycles actually work! Have had the washer 4 years and the dryer over 10. We like the Duet Washer because it had a steam cycle and a sanitize cycle plus it has a light inside that helps us see the laundry in our dark room or at night. Also we have been very happy with the cleaning - does a great job and gets the dirtiest clothes clean. The Fan Fresh feature and Delay Start are very handy especially for busy parents who may forget the laundry is in the washer.

Bought a Whirlpool french door fridge in July of 2019, The icemaker began pouring water out of it and the temperature of the fridge would not go below 50 degrees. Contacted Whirlpool and the technician says it will be over $800 in parts plus service to repair. Now I must go 24 days without a fridge in the middle of summer until they can get the parts. How does a 10 month old fridge need all of the parts replaced except the condenser in that short of time? Whirlpool should be held accountable for manufacturing the defective fridge and leaving their customers stranded.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

In 2010 we had to purchase a new hot water heater. Went to our local Lowes store to see what they offered. We decided to buy a Whirlpool energy smart electric water heater. It was large, 50 gallon. We have a large family and didnt like running out of hot water so we thought this would be great. Worked fine until yesterday when I kept smelling an odor like something melting. Could not figure out where the smell was coming from until this morning I got in the shower and had very little hot water. Went downstairs and seen the water heater was not working. Got the user guide out to see if we could pinpoint what was wrong. It said no power to control board. I checked the breaker box and found no problems. I got a flashlight to look at the control board and discovered it had overheated and melt the top of it. Have been on phone with Whirlpool nonstop with just a recording. The heater has a lifetime warranty so Im trying to get the replacement part for it that will cost me $115 plus shipping. I am really concerned that with this overheating it did not trip the breaker. Grateful it did not start a fire and worried if we repair it will this happen again and possibly not be as fortunate. I have seen on this site of another complaint with the same problem. Shocked there hasnt been a recall issued. Be careful!

Within six months, the plastic surrounding the oven and the plastic handle began began to crack. Company was of no help. Also, the screen says to change filter, even after you put in a new filter. Extremely disappointed.

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

It is a very reliable and efficient washing machine. I enjoy the energy saving features as well as how clean my laundry is, no matter how soiled they may be. I would definitely recommend a Whirlpool washing machine to a friend.

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

Whirlpool cabrio mod. WTW7300XW1 - I purchased this washer Nov. 2013. It did not work right from the day of delivery. Our clothes come out dirtier than before washing. Machine smells awful. I spend more in machine cleaner than in laundry soap. I have always purchased Whirlpool. Very dissatisfied with this model.

I bought a counter-depth French door refrigerator for our new build. I had to wait 6 months for delivery since it was on backorder. When it arrived a door was bent. Lowes replaced it with a door that had a leaky ice maker. Ice and puddles of water intermittently appear on our new wood floor. Whirlpools technician told us WE would be charged if they couldnt find the problem. Whirlpool rep confirmed. Also the manufacturer warranty began at purchase date instead of delivery date.

We purchased a new Whirlpool Refrigerator less than 3 years ago. The last couple of weeks the freezer hasnt been keeping cold enough. We lost about $300 worth of food in it. The refrigerator section isnt keeping as cold as it should. I call Whirlpool, but didnt have a warranty, so if I paid more money we could have a warranty and get it fixed. Who has that kind of money. When we purchased our appliances we thought we were buying good quality appliances. That sure isnt the case. They should last way longer than less than 3 years.I called where we purchased it from. Had the service man come out. There are four major parts that are wrong with it. $800 plus at least 3 hours of labor. Not worth that. Again who can afford such money as this. I called Whirlpool again. They could give me money off a new fridge but it would still cost almost $1600. Im so unhappy with the appliances. We also have a stove and that doesnt work right either. I believe that we should be compensated way more than they are offering. I would not buy another Whirlpool again. I will make sure people know that it isnt good quality. Im so sad. Who would have thought. It is time that the people at the top of the company think of those lower than they are. The people I spoke to on phone were very kind. I know they really cant do much. They are just the middle man so to speak.

I have Whirlpool 40 gallon heater 5 years ago. The pilot light went out and I replaced the parts. This has happened three times and I have replaced the entire thermocouple assembly three times. The last time, the parts came straight from Whirlpool. This time, the pilot light will not stay lit. I am on my way to buy another hot water heater for my family because I have had enough.

I have used Whirlpool products for over 30 yrs. This is the worst made product I have ever purchased. The ice maker doesnt produce very much ice. The cold water on door isnt cold. There is too much wasted space in freezer and refrig. side. You cannot get anyone to call you back to call for help. I contacted Whirlpool over a month ago. No return call yet. Consumers beware!! Model no. WSF26C3EXF01.

We have these appliances in our apartment. Its a gas range with a microwave over the hood. We did have the microwave replace a year ago, we have been here for 5.5 years. Its a good stove, we would consider buying one for ourselves.

We purchased this washer (Whirlpool Cambrio #WTW8000BWO) in December of 2014. It is now 3 1/2 years old and while the washer worked great til just recently, we now have to purchase a different one because this one will cost too much to repair. We did not get the extended warranty. I have since read that the Cambrio has had a lot of problems. Always check the long term owners and what they have to say about the item, would never have purchased this washer had I known what the problems were and that they even were having them they should have taken it off the market til they got the situation fixed.

I was very excited when Melanie from Whirlpool customer service called me back about my complaint. WHAT A JOKE! I thought she was going to offer at least a repair considering by her own admission this same problem with my control panel of my double oven happened just last May (dead for the third time). Instead she offered me 15 to 30% off a new product if I bought it in the next 30 days! ARE YOU KIDDING ME?The first time the control panel died was when I used the self-cleaning feature. The oven never turned on again. Cost me hundreds. I have been afraid to use the self-clean feature ever since. The second time was in May and is no longer under warranty? Again it cost me hundreds!! Now I am supposed to be happy with 15% off another one of your products? Why would I have any faith in any of your products? I have since found out that Whirlpool has had so many problems with this model - they have quit making it. The repair man says Whirlpool cant make the control panels fast enough to keep up with all the repairs but this is still not under warranty - how about a recall? Do you guys stand by your products at all?

I purchased a Whirlpool WTW6600SW in January 2010. I dont normally purchase an extended warranty, but it was a fairly expensive washer. So I did. In July 2011, water starts gushing all over the floor. After my first visit to see what is wrong, I ordered a part. I was out of a washer for 2 weeks. Then in August 2012 the same thing happened. This time the repairman didnt get the part on properly, so they had to come back a third time. I am out of a washer for about 3 weeks. Now, October 2012, it is doing the same thing again! Customer service tells me it has to be repaired for the same problem four times in the same 12 months in order to receive any replacement value. It will have to break two more times! This washer is a piece of junk!

Very unhappy with this fridge. The ice maker is finicky and the side shelves keep breaking. The cake drawer cover broke almost immediately. We replaced it and it broke again so we just took it off.

I bought a Whirlpool Cabrio washing and dryer in 2011. I have replaced the lid on the washer 3 times. It comes apart in the back of the lid and it will not lock in place so it will perform. I have called the manufacturer several times. They have not been of help as to why this happened. Im upset. They have no suggestions. I have owned Whirlpool appliances for years and this is the 1st time this has happened with no resolution. I just want it fix or explain why its happening.

This machine cannot handle washing jeans, towels, blankets, pillows or anything bulky or very small loads. The load becomes ul unbalanced almost every time I try to wash a load. It has never gotten things very clean.

I purchased my water heater at Lowes and had it installed professionally. I suspected something was not quite right on numerous occasions because the hot water recovery time seemed excessive. I finally called Whirlpool and they gave me the names and numbers of two companies that were on their list. The first asked for the model number and normal information and never called back. The second showed up spent five minutes charged me 78 dollars and said they could not get the part (gas valve) I needed. And if I could get it from Whirlpool they would charge me 250 to put it on. They also said Whirlpool made horrible water heaters and I should save myself the trouble and just replace it. I have since heard from additional plumbers and the gas company to stay away from Whirlpool. I did have the water heater replaced. When they did it and they drained the old water heater it had so much sludge in it draining it was very difficult. The sludge is mystery since I have a softener in my home and it should have prevented that. The individual from that gas company said that was just one of the many issue others had experienced with these heaters.

On December 24, I was planning my annual Christmas Eve dinner when my oven just decided to quit working completely. This was the third time my oven broke down on me. I called Whirlpool and they pretty much told me theyll get to me when they can but it was the holiday. So I understood that it would be a few days. I had a technician come out to my house on December 27 and tell me that he needed to order a fuse. He called all over the state to find one but no one had one so he put it as an emergency. The technician did everything he could to accommodate me but could only do so much. So I waited and waited but heard nothing.Today, January 3, I called the department to see when my part was going to be here and they tell me January 10 - unacceptable. I called the management team and spoke with Tiffany who pretty much just told me, Sorry. You have to wait five business days to find out if the part is available. If not, then we can discuss sending new ovens. Why would we have to wait five business days from January 3 when it was ordered on December 27? Look, Im a very reasonable woman and this is the first time I have ever complained online about a company. But I have gone 10 days without an oven and I have a family that I cook for daily.My ovens are four months old so this should not be happening. And when it does, there should be parts to fix it or a replacement on hand because no family should have to go without an oven when they just paid a ** load of money for it. Customer Service should be a little more sympathetic and a little less about business because at the end of the day, theyre not the ones suffering, we are. Also if this part is on back order, that tells me that this probably happens often. Maybe Whirlpool should recall this oven model because whoever heard of an oven overheating? Get it together. I will spread the word of mouth about my experience!

This washer is going back. It simply will not spin the water out of the clothes. It says it gets clothes drier than a conventional washer, but I have not found that to be true. I have to use the drain/spin cycle over and over and still the clothes are wet. I had the repair crew out and they were able to get it to spin out a very small load consisting of two sheets and two towels. Other than that, it does not spin out water. It is also very difficult to load if you attempt to leave the center open as they recommend. The cycles are very long. Not being able to look inside without pausing it and waiting for it to unlock is also a huge hassle. I am getting one with a glass top so I can see what is going on. If you leave it open for too long, it cancels the cycle and drains all the water, and you have to start over which is another problem because all your detergent just got drained out before the load gets going. It uses so little water on most of the cycles that the clothes get totally tangled up with one another. I think you should be able to choose the water level manually. I am all for saving water but if I want more water from time to time, this does not allow you to do that. I DO NOT RECOMMEND!

I love the brand. I just do not care for the lock lid on all the new washers. I could do without it. I do not have kids to worry about getting hurt. Im looking into finding a brand without a lock lid. I just replaced one before this one. For the lid breaking.

Within a few months after I purchased my gas hotwater heater, I started having problems with it not wanting to stay lit. It was purchased in 2004. I see that this is an ongoing thing with Whirlpool. Every time I would call them, they would give me stupid answers on what it could be. One lady got hateful with me. I have replaced every part several times and Im having problems. About every two to three months, Im replacing thermal couple. As of right now, Ive been without hot water for eight days. I called and he told me about a trip button that is in the little white thing that has wires going to the thermal couple. I push in on it and then tried to start my heater and it worked. They have never offered to replace it or even give me a discount on a new one. No one should be having so much trouble out of your hotwater tank. This is not normal. These are defective and should be recalled. This company is ripping the consumers off and we need to stick together on this and do something about it. Im afraid to buy another heater because I can see that the new ones are still junk. What do you do?

I purchased my Whirlpool gas range about 5 yrs ago as brand new. Two and a half years after purchase, I started getting the F2 error and always had to pull the breaker to stop the oven. Whirlpool would not do a thing, they wouldnt even listen to me. So I bought a new control panel. Now once again here it is the holidays and Ive started getting the F2 error when I try to use the oven. So needless to say this is my last Whirlpool appliance. And the Service Officer wont even listen to me when I say I have to buy a new oven.

Bought this 18 cu ft refrigerator this year. Only 3 choices for temp. Everything freezes, milk has crystals, ice cream is soft. Buyers remorse! Old ref was a Whirlpool. Wished I would have given others a chance.

Whirlpool double oven. The electronic control board has been replaced twice and needs to be replaced a third time after less than a year. The thermal fuses go each time I run the self clean. Whirlpools response has been disgraceful, trying to blame the problem on faulty installation when thousands of people have had the same problem. Ignore ANY US companys product; their warranties are worthless and they repair, not replace. My next oven will be European because in Europe they have to automatically warranty for five years any consumer durable. Consumer Reports ratings are worthless since they dont include breakdown experience in the ratings. Never buy anything from Whirlpool. They sell rubbish and dont honor their own warranty. Check the BBB rating. My brand new double oven broke down the first time that I ran the self clean cycle. Whirlpools response was to claim that the cutout opening was 1/8 inch too narrow and therefore they would not honor the five year warranty that I had bought from them. This was a lie, as I verified the width and it was exactly that required. Others have had the same experience. Whirlpool also makes Maytag, Kitchenaid, Kenmore and Ikea.

Most of my appliances are Whirlpool - dishwasher, refrigerator, clothed dryer and the Cabrio washer. The washer before this one, I had it for over 10 years and replaced it because of rust (thats another problem with Whirlpool - rust). Now the Cabrio hasnt got all kinds of problems - UL, F1 and jumping. The serviceman asked me for $450 for repair; it included a set of springs for the drum, a new electronic board and a 30-day warranty on parts and labor. Im better off buying a new one (I cant afford at this moment). My wife is scared of the darn thing and refuse to use it so now I have the job of washing and standing guard to make sure the washer doesnt leave the garage. Thank you, Whirlpool - and my refrigerator works fine all rusted.

Thank God for this website and Frank of Dover (postings on Feb. 11, 2013 and Jan. 7, 2011). We just had exactly the same horrid experience with the lid on our Whirlpool Cabrio Washer WTW7800XW. Just as with Frank, our home warranty provider first accused us of abusing the machine. I merely printed out Franks comments and description, whereupon the home warranty provider reluctantly agreed to replace the lid. We also bought an extra lid and are keeping it in our attic for the next failure. Do not purchase this washer!

Bought this washer 5 days ago!!!! Broke after 4 loads of laundry. Store manager says they will deliver new washer. ERROR CODE LD LONG DRAIN and heavy duty humming sound. Unplugged washer to prevent further damage to washer and reduce risk of electrical fire in home. Consumer affairs wants me to rate my experience - rate my experience on what? Ill give 4 stars dissatisfied here, but field wont let me go more than 2 stars. If its this website they want me to rate I give 2 stars dissatisfied, as for the washer, dole out 7 Benjamins for a product that dont work and you tell me!

My washing machine is just over a year old and it has ruined so many clothes... They come out with brown stains on them... Almost like a oily stain. Not sure where its coming from but its either Im gonna have to buy a different machine or keep buying clothes. My husbands t-shirts look terrible... If any suggestions to what it can be please respond back to me. Thanks. Model# wtw4815ewo. Serial# c51433710.

The duet washer is just over one year old and started showing F25 code on screen. It had been making a really loud noise in the spin cycle. Last week, a really loud noise and then the loads wouldnt be spun. There was a puddle of water on the floor near the machine. We had a repairman out today and he stated that theyre repairing these machines all the time. He stated it was the bearing and that theyd been told that Whirlpool had installed bad bearing from a different supplier. I called the Whirlpool experience and after 4 minutes and 19 seconds, I actually spoke with a service rep. She said since my machine is less than one month over the one year warranty, Id have to call the extended warranty people. I asked for a supervisor and after 2 minutes and 38 seconds, she came in line and wouldnt budge from her story. They also stated that there are no service issues with this model washer. Extremely poor attitude and Whirlpool is doing everyone, whoever purchased a duet washer, a terrible job on these washers. At least, Ive now found out that there are a lot of other folks out there with the same problem. We need to get some attorneys to start a class action just like the mold/smell customers did already. Sad, sad day for Whirlpool as Id been a customer all my life.

I am very happy with this dishwasher. It is not a high end, rather middle of the road, but is very quiet, does a great job of cleaning my dishes and pots and pans.

I have a Cabrio washing machine and the circuit board has gone bad. I understand from Whirlpools customer service that if your machine was made before 2005, they are fixing the issue. Mine was made after 2006. Even though the problem is the same, Whirlpool will not correct the problem. I was told it was fixed in the new machines. The circuit board goes bad and you have to start and stop the machine at least three times before it will start your cycle, then it stops again at the 17 minute mark and you have to cancel and start the machine again for it to finish its cycle. The error is F1. Customer service acknowledged that this is a known problem for the Whirlpool machines built before 2005 but deny any claim that is is happening to the machines after 2005. Looking at all the other complaints, it is still a problem. I am disappointed in Whirlpool for their customer service attitude and for them not standing behind their product and fixing a known problem. I have always bought Whirlpool products but going forward will be switching to a better company. Shame on you Whirlpool. For a machine I spent $1000 on, the part is going to cost $300 to fix.

If you like having to use a funnel to refill plastic water bottles, and enjoy ice splashed all over your kitchen floor then the Whirlpool Gold refrigerator is the model for you. The problem with ice is if you dont have your glass sealed up to the ice dispenser it will shoot ice out over the top of the glass, and even if you DO do that when you try to remove your glass to cut off the ice supply it continues to disperse ice everywhere. TIP: The only way to more efficiently stop ice from spraying all over your wood floor is to do this: When your glass is full of ice, simply open a door on the refrigerator. That IMMEDIATELY stops the flow of ice OR water. Works great, and its the only way to deal with this horrid design flaw in this product....

Washer Whirlpool Cabrio - Needless to say now, spin rinse not working, dark spots in clothes, sound like a jet leaving the room and earthquake at maximum potential when working, all previous reviews more than summarize my problem with the washer. How can we do to take a class action against Whirlpool for the defective Cabrio wash and dryer they are selling. If anybody knows, please guide me the right way to start it.

Sad that I have to file this review! After reading multiple other reviews on all brands available to American citizens, I have come to the realization that cheap labor and materials are creating massive appliance garbage in our country as well as financial rip off for us all. It needs to STOP! What has happened to doing things right!! What company is going to be the first to produce good refrigerators! Paid over $2000 for my side by side and it is only 5 years old and has a freon leak that cant be fixed. Repairman said will have to buy a new refrigerator. Pathetic!! Cheap manufacturing in foreign countries is killing our economy and our household finances. Be prepared to buy NOTHING that works! Yeah, thats what I work hard for and look forward to. Americans better wake up.

I purchased an expensive dishwasher made by Whirlpool and sold at Lowe’s. Immediately upon receiving the dishwasher I noticed a good size scratch. I had it serviced within one month of purchase because dishes were coming out dripping wet. Technician came out and told me I needed to add rinse aid. I had been using rinse aid, which I think is ridiculous to have to buy an additional bottle of something that’s not even cheap just so this thing dries dishes but moving on...Now it’s been 1.7 years and I’m having more problems. Top rack of dishwasher is broken and falls to the side every time you pull it out. The door to dishwasher also no longer has any spring. I take very good care of my things and this just unbelievable. I called Lowe’s they won’t help because it’s been more than a year! I guess Lowe’s can’t stand behind their merchandise for more than a year because they know they’re selling garbage. I called Whirlpool directly and was told they would come out and service my appliance for a minimum charge if $189! I have no words. I need to buy a stove in the next week and I assure you I will steer clear of Whirlpool. Like the title of my review I feel absolutely robbed.

My Cabrio washing machine is a hunk of scrap metal after five years of lite use. Replaced the electronics first, then a year or so later replaced the motor. Now its leaking from the bottom. Repair man said it is not fixable. I did not buy a warranty because it was too expensive compared to the value of the washing machine. My recommendation to anyone buying a Whirlpool appliance is to buy the cheapest thing on the market, so that you can throw it away when it breaks because they are made to break so that they can sell you extended warranties.

I purchased the Whirlpool Cabrio Washer thinking I was purchasing a quality product. Unfortunately it was one of the worst decision my wife and I have made. The bearings (lower) only last about 2 years. We purchased the extended warranty and the first time it was covered. The second set were not covered and now we will have to change them again. We will not ever purchase another Whirlpool product. I contacted them several times with no positive results. I still saved the last worn out bearings to show the CEO. The engineers do not have a very good idea to make the lower bearing last. Where I purchased the machine they told me after the first change that it would happen again and they were correct. If anyone needs to contact me about this product feel free. NEVER EVER BUY A WHIRLPOOL PRODUCT.

Twice purchased washers Cabrio and both after 5 to 6 years break down showing f1, f2, UL codes. Shame on this company. They refuse to give us a particular time to fix it and have the nerve to charge us for the visit without fixing it first.

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

Bought whirlpool Cabrio at Lowes. Would not complete spin cycle. Had Whirlpool Service Tech out. Seals were gone. Bearings shot. Rotor and stator from motor shot. Wanted over $500.00 to fix. Called Whirlpool and they did nothing. Spent $100.00 for the service call. Ive read all over the internet about similar issues. Never heard of 4-year old washer so badly damaged. Piece of garbage. Very unhappy and will avoid anything made by Whirlpool again.

I bought the Whirlpool Cabrio model # wtw5500xw2 about two 1/2 years ago. Besides my clothes not clean, I havent have any problems with it until recently. Usually it doesnt spin. The clothes are left soak and wet. First the belt broke, then the lid lock, then the nut came off the pulley, then the splutch assembly. There was a few more problems in there. Now who knows what is wrong with it? It is one problem after another. It is a money trap. The CEO was just after money. There needs to be one big lawsuit against Whirlpool. After I find out what is wrong with it and the cost to fix it, I probably will just go buy a new washer/dryer set. And it will NOT be a Whirlpool.

Im happy with my 9 year old purchase. They are front loaders and they sit too low for my comfort. The available pedestals cost hundreds of dollars for a pair...that I do not want to spend. I have not had any repairs needed.

I purchased a Whirlpool front loading washer from PC Richards in January of 2010. The warranty was only for one year (the washer was new, not used). The model # is WFW9050XW. Anyway, the washer had to be repaired by PC Richards twice in the first year I had it. Once because the belt that makes the washer spin broke, then because the pump got clogged. Unfortunately, when you wash your clothes, your socks and underwear can get sucked into the pump. After that warranty expired, I purchased a warranty from my utilities company (PSE&G). I have had to contact them four times for repairs to this machine. The most recent problem is my clothes are still wet after the washer stops. I actually have to wring them out by hand to get the excess water out. When I contacted my utilities company about servicing the washer, I was informed that if the repair is more than the washer is worth they dont have to fix it. I canceled the repair and now got to the laundrymat. I figured if I wait until the end of the year, maybe the repairs wont seem excessive. I contacted Whirlpool about the problems and was informed that I should have been using a garment bag to wash my socks and underwear in. More or less the person I spoke with made it seem as though it was my fault the machine sucked up my underwear and socks. I, on the other hand, disagreed with her. I told her the washer should have been build so that it would not suck up these items. I was so totally pissed off I ended the conversation. I also informed her that I would not be purchasing any other appliances manufactured by Whirlpool or Maytag as they are affiliated. They obviously have no integrity when it comes to their product. However, I am totally baffled. Why do the Maytag machines work better and last longer than the Whirlpool machines? The washer I replaced was a Maytag. I had that machine for 17 years!!!!

I bought my Whirlpool top loading washing machine 07-22-14. I so dislike the locking mechanism and will be certain to never, ever buy a machine with that feature again. It is so irritating to try to add something but cant because its locked so have to hold the button 3 seconds to unlock and start all over. If there was any way to get around it I would. I will stay away from Whirlpool products in the future and will be sure to check the next time I buy that the lid of the washer can be lifted when not spinning. Also, I do not like that it sticks on rinse sometimes and the only way to end a cycle is to hold the button and then start over with much wasted water.

We purchased this model in July of 2019 and have had nothing but problems with it since. The design is really bad - if you set the temperature on the ideal setting, everything on the top shelf freezes solid. If you reduce the setting to the one below ideal, your freezer doesnt get cold enough to keep ice cream hard. The ice cubes are a little more than half the size of our last Whirlpool refrigerator and the unit is noisy. Weve had Whirlpool out to work on it 4 or 5 times in the first 6 months and twice weve had to throw away food due to the unit not cycling on and off properly. One of the technicians told us he spends a lot of time working on this particular model - evidently, it has a lot of issues. We are now using our old garage refrigerator while we try to get Lowes to give us a refund on this piece of junk.

Whirlpool Cabrio Platinum Washer - Worst purchase ever! Washer will NOT clean clothes. It leaves detergent residue on everything and I use liquid detergent. All of my husband’s dark police uniforms have grey powdery looking streaks on them after they come out of the machine. Does not matter how I load the clothes. The horrible results are the same. Even rewash and extra rinse, streaks are still there. This model, Cabrio Platinum was very expensive! Never buy a Whirlpool.

Two days after the one year warranty ran out on our front load washer it started making a terrible noise. Of course the Whirlpool warranty was no longer in effect. The good news I was sold an extended warranty from Nebraska Furniture Mart. Called the Service Provider and was told they will only service the washer if it is not working. After several more calls they scheduled a service call in 10 days. We are a family of four, yes no washer is a problem. Finally the technician showed up and said the main bolt holding the drum assembly in place had broken off. He would have to order the bolt. It is now on backorder for 3 weeks. No washing machine for 4 people and now nearly a month is a pain. Not only did my calls to Whirlpool do nothing but the calls to the third party Warranty Company have been very frustrating. My call to the salesperson at NFM was very helpful, but didn’t help get our washer fixed. This is our second and last set of Whirlpool laundry pairs in less than four years.

The main control panel on my Whirlpool Cabrio Washing Machine broke twice in the second year of ownership. I bought this in 2006. The part was replaced in March 2007 and then again in October 2007. Now, it is broken again and Whirlpool says too bad, they will not replace it again and will cost us $275 to fix it. People have posted about this problem all over the internet. How can they not help their customers and recall this washer part?

We bought our washer in on 2011. Within a few months, the washers behind the screws on the top began to rust. Now less than two years after purchasing this high efficiency and expensive washer, not only are all the washers rusted on the plastic lid but behind the the lid and the side of the washer is rusted. Very disappointed and recommend that you do not purchase this machine.

Love love love my Whirlpool range!!! Regular bake and convection!!! Huge oven, beautiful glass top, and 2 burners that have double surfaces to fit huge pans! It has steam clean feature too!!! Incredible and amazing price!!!

We recently purchased a Whirlpool fridge, model WRT138FFDW and are very disappointed with a couple things. First of all, the refrigerator arrived with a broken shelf. Although it was no problem getting a replacement, we found out quickly that it is very hard to balance things on a wire shelf. Water bottles and the like fall over. It is completely our fault for not noticing when we purchased, but just giving you a heads up that it will be a pain for you. Secondly, the sound of the fridge is very loud. It truly is driving my wife crazy. When we called Whirlpool, we were told that if they come out to take a look and the part is not under warranty, we would be charged $129. It is a brand new refrigerator, how can some parts not be covered??!! On a positive note, it does keep things cold and the color white is nice. I will not be purchasing any more Whirlpool items for my home. Bad fridge and customer care!!

Oct 14th I walked down to our basement to find it flooded. Turns out the leak came from the solenoid that controls the water feed to our Whirlpool Gold Series refrigerator. Now, some $28,000 in damages later - floors/cabinets/walls/electronics - you name it. The repair company said that they replace these units a lot as it is simply a faulty design and Whirlpool knows this as this part is very difficult to obtain - too much demand. Well aside from the cost, the inconvenience, and the rise in our insurance rates the repair person said there was a good chance of the new part failing as well - it just cant take the water pressure as it is just cheap plastic. My advice - stay away from Whirlpool!

Purchased a WDF530PLYM3 Whirlpool dishwasher at Lowes in 2013. Now Ive paid $96.00 to Whirlpools authorized repairman to tell me it needs over $400.00 worth of parts (user interface and control board). He informed me with new digital controls, you MUST purchase extended warranty because they are not built to last and repairs are ridiculously expensive.

A Whirlpool hot water heater in an apartment I own would not stay lit. A plumber came to service and told me I needed a part from Whirlpool and that no one in town carried them. I called Whirlpool and after providing all information about the unit, she informed me that she would not send me the part because the serial number was not registered in my name. I explained to her that I purchased the building and did not install the water heater that a prior owner had installed it. All I wanted was a repair part. The Whirlpool rep refused to sell me a part unless I could provide a bill of sale where I purchased the tank. The part cost $41 which I was more than happy to pay for regardless of any warranty coverage. I have an obligation to provide services to my tenants. Being unable to repair the tank for a problem which appears to be commonplace for this brand, I had to replace with a new tank at a cost of $1380.00.

I hate the thing. The grates are way too large, they are too heavy, and the fact the high is not a true high and the other three are different temperatures. The oven is awful. It half cooks. You cannot do decent canning on the thing because you only have one burner. This is a mess from the get go. Why in the hell do companies think everything has to have a computer attached to it? Computers and heat do NOT mix for Gods sake. A simple gas stove is sufficient to cook with. Take the computerized junk off and make a normal stove.

Purchased a Whirlpool Cabrio Washer 5 years ago because our other washer died after coming home from vacation. Its just 2 people in this household so I dont do mountains of laundry. The other machine lasted 15 years so go figure. We purchased the Cabrio from Lowes. Got the extended warranty but as it goes the machine fails when all warranties expires. Over the last couple of weeks this machine started to not complete a wash cycle. All lights go off except for spin light and machine stops. Even asked the person in charge of washers and dryers at Lowes about this who then told me to get an extension cord and plug it into a different outlet. Seriously! I have had to unplug the machine after it fails to complete cycle, wait 5 minutes or so, plug it back in, select rinse and spin, it fails again 13 minutes left in cycle, unplug again, plug it back in, select drain and spin, wait for it to MAYBE complete that cycle. Do not purchase this type of machine. Just for a technician to come look at it is $100 or more and to replace whatever circuit board is probably another $300 or more. Screw that! Going to find a good old fashion one if possible. Piece of junk. Not going to spend $700 or $1000 just to wash clothes for 2 people.

I dont take pleasure in writing this review and to the readers, please know that this is the truth without bias. Before you buy from Whirlpool or purchase their extended warranty, you should know: I am writing this review based on my personal experience. I purchased the extended warranty in 2017 (approximate) for three years. In 11/2018, our Whirlpool dishwasher, model wdt920sadm2, which was purchased with our new home in 06/2016, began having issues and was not drying the dishes properly. I called Whirlpool warranty and requested service.Approximately 10 days later, a repairman from Convenience Appliances Service Inc. (repair tech) came and fixed that problem (wasnt drying). My wife turned on the dishwasher the very same day and we came back and the floor was flooded with water. We believe this was contributed to the initial repair and has never happened prior to that. Fast forward, approximately 5 service calls or more later (not embellishing), the dishwasher is still not repaired and the technician can’t figure out where the leak is coming from. On 02/25/2019, I received a phone call from Ms. **, Whirlpool/AIG care team (AIG is the underwriter) and was offered $540.75 and I would be required to complete a “proof of destruction affirmation” form.I accepted the offer and received an email the same day stating: Thank you for contacting Whirlpool Extended Service Plans Consumer Care Team. Per our conversation, I have attached the affirmation of destruction for your dishwasher. Please verify the information, sign, and return to us. Once we receive the affirmation of destruction back, we will start to process your prepaid debit card. That card takes 10 to 15 business days to process and will arrive to you by FedEx. If you have further questions or concerns regarding your Whirlpool appliances, please contact us directly by calling toll-free (866) 931-7390 to reach a representative for immediate addressing of these issues between 7 a.m. to 10 p.m. ET daily, or by emailing AIGservice@whirlpool.com whenever the need arises. Sincerely, Mable. U.S. AIG CARE TEAM.That same day, I received an emailed the affirmation of destruction form back to Whirlpool on 02/25/2019. I was impressed at the time that they reviewed the repair case history and made this fair offer. My wife and I began to look for a new dishwasher and canceled the future service appointment with Convenience Appliance Services because of the offer and acceptance. On 03/01/2019, I received a call from Convenience Appliance stating that Whirlpool contacted them and they are taking back their offer because their employee (Whirlpool) didn’t follow the terms of the contract. I called Whirlpool/AIG care team and spoke to ByonBera who stated that she was sorry to hear this complaint and would forward this to her manager for resolution. On 03/04/2019, I received an additional call from the Convenience Appliance Services Inc. and they stated that Whirlpool representative was not very nice to them and that they still wanted them to come out again to my residence on 03/11/2019. On 03/04/2019, I called Whirlpool/AIG care team again, and spoke to Tandy, who again apologized and read their company script and that they are sorry but still reneged on their offer. She then transferred me to John, who again read through his script/terms of the policy. I explained in detail that Whirlpool contacted (as per their email) me directly and they made the deal. I never called and asked. I completed the affirmation of destruction as requested and was promised $540.75 within 10 to 15 days by FedEx. John stated that he would have to kick this up to their resolution department above him to see if this can be rectified. John stated that this has never happened where the customer is involved (mistakes are normally caught before the customer is contacted) and that he could understand my complaint and frustrations. I received a call back from John on 03/04/2019 that Whirlpool will not keep their offer and that a repairman will go out as scheduled even though they made the offer without solicitation! Incredibly upsetting and disappointed!!! I have never experience anything even close to this from a major company like Whirlpool. It is evident that they don’t keep their word, that customer satisfaction doesn’t matter even if they are 100 percent wrong, and that their dealing are very deceitful! We since canceled our order for a new dishwasher and are now forced to wait for the next repair attempts again. If you get anything from this long-winded review, really think twice of making a Whirlpool purchase, or their extended warranty! Whirlpool really could care less of their customers and in addition, their warranty, in my opinion, is a scam. After this I, nor my family will ever purchase a Whirlpool brand appliance again. So please be careful and learn from my experience. Never again! Whirlpool should be ashamed of themselves.

18 months ago my husband and I bought our first Whirlpool washer and dryer to go with our first home. 6 months and the dryer stopped spinning. There was an issue with the belt. 12 months later the washer has stopped draining and spinning. It is 2 months since our first filed complaint with our extended warranty company and we still dont have a washer that works. I dont care if I have to take my laundry to the river and beat it with a rock. I will never buy whirlpool again.

I purchased a 50-Gallon Electric Water heater in 2006, sure it lasted and worked well for quite a few years; however, in August 2014 my power bill started to rise dramatically, I live in Arizona and $300-$400 power bills are the norm in the summer months; however, a $700.00 bill will immediately be noticed. I contacted the power company and they sent a tech over who performed a lengthy diagnostic and determined that my water heater was running constantly thus accounting for the great increase in power, I contacted Whirlpool and received 2 heating elements (no charge) which my pricey plumber replaced.The problem still remained and I contacted Whirlpool again and again trying to get this issue resolved. I paid less than $400.00 for the heater installed and since Ive been having the issue Ive almost paid another $400.00 in labor costs trying to get a resolution. Ive decided to get another system and my only reason for posting this is to inform all that the Whirlpool heaters seem to be very problematic, like others Ive had plumbers decline my business when I inform them that I have a Whirlpool tank with the Energy Smart module.

Whirlpool washer cabrio WTW7800X - Lid broke for the second time in less than a year. It is a defective part. Whirlpool should recall it. I will never buy Whirlpool again. The lid costs more than $200 + labor to replace.

Purchased Maytag Washer and Dryer online from orange big box home improvement store. Washer had a twisted drain hose inside so it wouldnt drain right. Fixed that myself, but it still wont drain right. The spin cycle is weak at best - towels require a second, sometimes third, spin cycle. The dryer does not heat up like it should on the standard setting. The end of cycle buzzer/beeper on both units is truly pathetic... you better be within 6 feet of the machine when the buzzer goes off or youll never hear it. Having worked for a blue big box home improvement center for 7 years installing appliances, I know all too well the rabbit hole Whirlpool is trying to push me down. All I want is to return the Maytag and go back to a Whirlpool, but the not so pleasant lady on the phone with Whirlpool said all they can do is send out a technician, no returns on appliances. Buyer beware, be very aware!

We purchased a Whirlpool refrigerator from Conns Appliances on 2/2/12. It worked fine until about 2 months ago. Then it started freezing food in the refrigerator. We called Conns, and they sent a technician to replace the thermostat. A couple of days later, it was still freezing food. So we called Conns again. They sent a second technician. He called Whirlpool tech support, and they told him to adjust the position of the thermostat sensor. A couple of more days went by, and food was still freezing. The problem had gotten even worse.I called the manager at Conns and suggested that we should consider replacement since the previous 2 technicians were unable to solve the problem. He sent a third technician. Tech #3 called Whirlpool tech support and re-adjusted the sensor. He said there wasnt a lot they could do and that if I wanted to get it replaced, I would need to call Whirlpool.I called Whirlpool Customer Service and explained everything that had happened. They told me they would need to send another technician. I asked why, since 3 technicians had already looked at it. She said there were different levels of service and they would have to send someone from their authorized service company, as if Conns is not authorized. I asked if this problem was common in this model of refrigerator. She said she could research that if I could hold, so I said ok. After being on hold for several minutes, she came back and said she couldnt find any record of this being a repetitive problem.I didnt have a thermometer, and I thought if I had more concrete evidence of the problem, then maybe they would replace the refrigerator. So I put a glass of water in the middle of the top shelf. Within 24 hours, it was frozen solid as an ice cube!Technician #4 came and called Whirlpool tech support. This time, they told him that this had been a problem ever since this model came out and they had a fix that had been on the books since day 1. So the customer service lady obviously lied to me. Technician #4 stuffed a piece of Styrofoam in the hole where the air comes from the freezer into the refrigerator and he re-adjusted the thermostat sensor. I asked if we could just replace the unit and be done with it, but he said we had to wait and see if his fix worked.I went to Ace Hardware and bought a refrigerator thermometer. Two days later, we had frozen strawberries, frozen lettuce, frozen milk, and even the meat and cheese were freezing. My thermometer said temperature was 32 degrees. I called Whirlpool back and insisted that they replace the refrigerator. They told me The unit was not authorized for replacement and they needed a 2nd opinion. I was very angry. I told them there had already been 4 opinions and a 5th wasnt necessary. I wasnt getting anywhere, so I asked for a supervisor. They transferred me to someone named Sue. Sue told me the same thing - not authorized, need a 2nd opinion. I told her that I work at The Mens Wearhouse and that if a customer spent that much money on a suit and had trouble with it, they certainly would not have to bring it back 5 times to have it re-tailored. I asked to speak to her supervisor. She said, Sir, my supervisor doesnt speak to consumers. I could not believe my ears. Where would they be without consumers? I was so mad I hung up on her.Later, I realized I had no options and called to request the 2nd opinion. I was told that the technician could authorize the unit for replacement. They also told me I couldnt get a technician for a week because their technicians were all booked up repairing their faulty products. I had no choice but to wait. I moved my thermometer to the bottom of the refrigerator to see if the temperature was the same there as on the top. The temperature there fluctuated between 28 and 34 degrees. I called Conns to tell them the story, thinking maybe they would go to bat for one of their customers. They told me this should never have happened and that the matter should be escalated to their home office and that a manager would contact me within 30 minutes. He never called.Two days after that phone call, I went to Conns to speak to the manager. I told him the whole story and told him that if Whirlpool would not replace the refrigerator, then I would have no choice but to contact Discover (my payment method for the original purchase) and dispute the charges. I pointed out that even though it should be Whirlpool paying for it, his store would take the hit if Discover reversed the charges. He called someone and told me a Conns service manager would contact me within 48 hours.More waiting. Technician #5 came. I told him he was to authorize the unit for replacement. He said he couldnt do that and that Whirlpool tells all their customers that just to get them off the phone. He re-adjusted the temperature sensor and left. I was livid. Now the problem went the other way. The temperature wouldnt go below 50 degrees. We filled an ice chest with food and ice and began living out of it. The Conns service manager called and said he would have to send a technician. This would be #6. I was very angry with the service manager and called Discover to dispute the charges. Discover opened an investigation, sent a letter to Conns (and maybe Whirlpool, Im not sure) and issued a credit to my credit card account.#6 came and re-adjusted the thermostat sensor. The next morning, he called to see how it was doing. The temperature was still around 50 degrees. He wanted to come and adjust it again. I told him to get the unit replaced! So he submitted paperwork to request a replacement. He called back and said that he felt sorry for us because he knew we had a 3-month-old baby in the house. Since the replacement had been requested, Conns wouldnt pay him to come again; but he said he would come on his own time, on his lunch break, and readjust the sensor in hopes that it would get us by while we waited for a replacement. He said it might take 3-4 days to get the replacement. I told him he could come, so this was technical visit #7. He adjusted the sensor. The next day, the temperature was still 50 degrees.I called the service manager at Conns to confirm that they had requested the replacement. He said the paperwork was submitted, that the home office would review it, make a decision, and that we should know something in a couple of days. That was on Wednesday. On Monday afternoon, I called him again. He said the paperwork wasnt submitted to home office until Saturday and that he was expecting to hear from them by end of day Tuesday. In the meantime, we were still living out of an ice chest.I had already determined that Whirlpool wasnt going to help me, and now, Conns was giving me the runaround. That afternoon, I was working on a project at work with a lady who was fairly new in our company. Turns out she used to work at the Conns home office and she knew people in high places there. She called a VP on my behalf. The next morning, I got a call from the VP telling me that I could get a replacement. I dont think I would have gotten my replacement if I hadnt bumped into the lady who used to work at Conns.I called Conns store, and they said a credit had been issued and I could come to the store and pick out whatever I wanted up to the amount of the credit. I knew I didnt want another Whirlpool. The selection was very limited, but I found a Frigidaire that I thought might work. Then they told me I would have to pay extra for an ice maker, even though I had bought the ice maker for the Whirlpool that was being replaced. I argued with the manager until finally he agreed to give me the ice maker, delivery, and installation.Yesterday, Conns called to tell me they were coming in the afternoon to install the refrigerator. They had the audacity to ask me what was the matter with the unit they were replacing! They did come and replace the unit. But wait...Thats not all! This morning, the ice maker had not made any ice, even after running all night long. Conns sent a technician today, and he said all of the parts were not installed and it was preventing proper water flow. He is coming back on Tuesday to install the missing parts. So we still arent done. I dont know if Im more angry with Whirlpool or with Conns. Whirlpool did not honor their warranty and Conns got stuck with it. But then Conns provided poor service too. I got stuck in the middle, and it still isnt fully resolved.

I bought this washer less than 2 months ago and I am devastated to say the least as they are not even remotely cheap. Appears that is doesnt come close to using enough water or enough agitation to get even 2 pieces of clothing clean. What good is 5.8cu (largest size tub) if you cant even wash a load sized for non HE washer. I am forced to wash a 1/4 of the amount of clothing now vs my previous standard washer, if I even want half cleaned clothing. I have tried every cycle with no difference.Doesnt use enough water but appears to spend most of the cycle time, filling with water. I know that sounds contradictory, but there isnt really any other way to explain it. Might as well not even have an (agitator), I use that word lightly here, as it does nothing to help clean the clothing inside. Pre-programmed cycles are not enough to do what you need it to do. Because of the pre-programmed cycles, unable to place clothing inside, fill with water, agitate a little and then stop or pause long enough to let contents soak for a while. I really miss being able to do this with my previous Whirlpool washer.It doesnt matter how little or how much detergent you use, the results are always the same, clothing comes out partially dry and dirty. Usually requires 2 or more wash cycles to remotely obtain clean items. Most items never even go under the water, no matter how much water it decides to fill with. I am so disappointed with Whirlpool with this fiasco they call a washer, with their name on it and they should be also. I have never owned any other brand than Whirlpool, so I didnt hesitate to buy this set, as I had wanted them for several years and finally made the decision to purchase and what a mistake this was. Will never make this mistake again. Whirlpool needs to correct this for every customer that has purchased these washers or risk ruining their reputation.

This washing machine (Whirlpool Cabrio) is the worst piece of machinery I have ever purchased. We have had to make numerous expensive repairs and now its broken again. Rather than pay $400.00 to repair it yet again we have decided to buy a new one. Definitely not a Whirlpool.

I have never posted a negative product review but must do so now. The refrigerator is 1 1/2 years old at most and has been well taken care of. I noticed today that the finish at either side of the bottom of each refrigerator door handle has a problem. I couldnt tell if the finish was pitting or is just discolored. I called customer service and expected that they would help, especially since we have an extended warranty. Representative number one told me that the extended warranty only covers problems that affect the function of the product. I spoke to her supervisor and then her supervisor. I got plenty of apologies but no support. I offered to send pictures, but they were not even interested in checking out the problem.After speaking to them, I took the handle off and I see now that the handle cut into some sort of film that exists on the metal. (I am not talking about the protective plastic coating that is on the the refrigerator at delivery.) The film is lifting off the surface and creating discoloration. If Whirlpool was at all concerned, I think this issue could be fixed with some sort of gasket to keep the metal handle from cutting into the surface. Im hoping the problem is static, but hard to say what will happen. If they had been interested in trying to understand the cause of the problem, it would have been easier to accept the limitations of the warranty. It would have demonstrated an interest in avoiding this problem for other consumers in the future. My last Whirlpool product. Period. Good luck if you decide to do business with them.

Whirlpool is a very good company and their products work very efficiently! If I had a choice to choose in a different type of washing machine I don’t think I could choose. Whirlpool is very reliable. Their older machines as well as their newer machines! They last pretty long. The dryer is dry very well as well as the washing machines agitate your clothes to get them clean.

We purchased the Cabrio washer & dryer with 6th Sense technology in 6/2007. What a mistake it has been. We have had 3 F1 error codes that a repairman has had to come fix all about a year and half apart. It makes crazy loud sounds if it decides to actually spin in the final spin cycle. It normally does not spin. It just always flashes UL for unbalanced load. We are extremely dissatisfied with this set. The dryer heating element has gone out also. We just purchased a new part. Prior to this, we had a hand me down washer & dryer that worked excellent. We regret getting rid of them, and now need to purchase a new washer & dryer. Whirlpool ought to stand behind its products and get this fixed.

Purchased heavy duty dual steam washer and dryer in 2008. Recently got some error codes that we could not fix. Had one service company come in and they could not figure it out. Had a certified Whirlpool company come in and they could not figure it out. They called Whirlpool technicians and they were even unsure of what is wrong. Said they could keep ordering parts and trying them to fix the problem. And of course I would be responsible for the parts. And no guarantee it would be solve the problem. Called Whirlpool direct, to no satisfaction. They said they could send the same company out and have them call the tech line while on site and try to troubleshoot the problem. However, would have to wait another 3 days to get him out. Been a week without washer. I have had washers bought previously last over 10 years without any problems. If these machines are breaking or control boards are going out after about 4 years, then Whirlpool has a bigger problem. Whirlpool supervisor was only offering to maybe a discount on the parts needed, without even knowing if they could fix the problem. Seems to me like they really dont care. Very dissatisfied, will definitely not recommend this product to anyone. And if it ever gets fixed, I am going to sell them immediately.

Very bad model Whirlpool washing machine. Pls dont buy any customers because from the date of installation its a headache for my family. I have a trust on whirlpool company but now I dont have. The problem is in every water select mode the tub is filling full and overfilling from the top always room fully with water. I hope the machine is not sensing water level. Such a bad experience from whirlpool company. My review is genius. My date of purchase is 28/7/2021

We have had the same problem with the magnetron in our Whirlpool Microwave Hood Combination. Replaced this part in Dec. 2012 after warranty expired. Cost of repair was nearly cost of microwave. Magnetron went out a second time this week. When I called Whirlpool customer service, the management rep was very hard line about the warranty on the unit and parts. Very clear this company has a product reliability issue and does not want to keep its customers. I dont plan to purchase another Whirlpool product ever. What a frustrating disappointment!

Lu ** is a mgr. at Whirlpool customer service. Shame on you for the way you spoke to me. Then giving me a joke # to call... Karma sucks is all Ill say to you. I have to wait on the phone to speak to anyone is over 30 mins. Just to get pushed off to the side like I dont matter. Im trying to get help to have mine looked at to pass the time for another Whirlpool to come to me! Mind you mine didnt last 4 yrs. Yes I was trying to buy another Whirlpool but after this sloppy customer service. You dont need this stress... Stressful enough that these washers dont last anymore. Ya GE AND MAYTAG ARE LOOKING BETTER AND BETTER.

I’ve had my Whirlpool Duet for 12 years and it has been a great one. I’m a mom of three sons, all of them wash their own laundry!! Lots of loads are done weekly and it cleans well! We leave the door opened after it’s unloaded so the tub will dry. Every few months, I put a tab in it so it will clean out all of the buildup. I don’t get the “front loader smell” that way.

We bought the microwave new after the 2011 flood where we had lost everything in Tennessee. I wanted to get Whirlpool appliances in the kitchen so all appliances were replaced. We bought a Whirlpool model WMH1163XVU-1 microwave; the unit will run but doesnt heat. I also called Whirlpool and with no regard to customer service at all even with all the complaints... This saddens me because I will never buy a Whirlpool appliance again and my grandparents only believed in them... With all the complaints, the attorney generals office should do something for the people.

Our Whirlpool Duet Washer pair is 2.5 yrs old. The washer didnt work at first, but a repairman found the problem and fixed it right up. They have not broken. The dryer has been fine and we have had them stacked for most of the time without any issues. My problem sounds minor compared to those others listed here, but this thing is ruining all our white or light colored clothes. They go in white, and come out covered with splotchy, dirty looking spots literally all over them! They werent that kind of dirty when they went in. It’s the oddest thing, like it makes dirt. Reading some of these concerns makes me wonder if it has a mold problem inside somewhere, and that is what is ruining our clothes. Tax return is coming and it is going. End of story.

My model # is WTW4800BQO. Purchased 05/20/14 and, under warranty, had repair come several times and they finally supposedly replaced the brain of machine and said nothing further could be done. So all this time I operate the machine manually - timing everything from wash to spin. On all cycles I have to manually - actually turn off machine when first wash is completed and reset to rinse and spin otherwise it only partially fills and drops the water right away on the 1st rinse (besides also dropping water on 2nd rinse). Also I came home one day, after completing a wash load earlier, and found the machine filling up with water automatically so now I always have to be sure the machine is unplugged when washing is completed.

It has needed a new motor, new tub assembly, and about six other repairs. Now the heavy duty tub just thumps around and I get an uneven load message, even when running empty. It is the worst single machine I have ever purchased, with the possible exception of the Whirlpool matching dryer, which lasted about three years.

I purchased a Whirlpool Cabrio Washer WTW6200 & this yr purchased a newer dryer w/ steam capability. I wish I would have waited a couple months for a new washer that yr and purchased the one with no agitator inside! But my washer died that day & I needed one & NO ONE informed us of the changes or problems of this agitator at the time of purchase. I have had this service several times my first year and the agitator replaced I believe twice. But it still destroys clothing. I called 1 month out of warranty and even though they had been out several times the first year for the same issue, they would not help me! Yep, even after the 1st year they said to get things done I had to purchase an extended warranty even though this was a mfr issue no doubt! So, 3-4 years later I still am dealing with the very same issue over and over with NO RESOLUTION in site and $900 in the hole for this washer and I am losing money with clothing damage weekly!Even today I had two pair of jeans, $98 ea rec these terrible uniformed marks all across the legs making them unwearable! At least for where they were intended to wear them at. They are now yard jeans...yep $98 expensive yard jeans now!!! These were my good jeans which I cant afford to buy more nor replace them so I have to do without. We cant wash anything with strings such as hoodies, shirts or baby clothing with spaghetti straps or little dangle things; we have to use the laundry mat and come home & dry w/ my Cabrio steam dryer which I love. Most everything I have to use zipper net bags but even then things still can get destroyed, especially if a hole gets torn in the bag from the wings of the agitator as you will see in the below photograph. I currently have & own an expensive washer I purchased from HHGregg by Whirlpool replacing a previous whirlpool I owned for 22 years! Yep, Im wishing I had it back & put the $200 some needed to repair it! Please Whirlpool will you please do something & make this right once and for all. I dont have $900 for another washer. I just want to be able to use my washer without it destroying everything I own. I have darn photos of what this is doing and you wouldnt believe it. It took us an hour, yes an hour to untangle a top that became entangled in the flaps on the agitator. This is the worst design I have ever seen and needs to be recalled once and for all and either fixed or replaced with new machines of equal model with the agitation issues resolved or removed & with no issues or further costs to your customers! Why would you honestly believe that an agitator with wings coming off the bottom that are not attached to the bottom would serve some type of positive purpose in cleaning clothing? All it is doing is tearing them to shreds, tangling them up, doing things to hoodies which make them unrecognizable after ripping the cords so hard out of the hoodies that Ive seen them shred the material across the collar area and opening of the cording completely ruining hoodies ranging from $35-$75 a piece even after placing them in mesh bags! Why did we keep placing hoodies in the machine? Well with 4 children at times they just dont listen or get all the info as to what is going on with the machine as 3 were college kids coming home periodically & yes, to do their laundry. Look, lets talk straight. You as a company from what I have learned from appliance salesmen locally and regionally, you knew this was wrong and knew this was your last ditch effort of an agitator before you knowingly knew you were going to an agitator-less unit on your washing machines & already had one ready to go out on the floors. I know that you Whirlpool CEOs knew this unit was a bad call but chose to ignore it. You had to know it because there was no way this could have passed quality control. It had to have failed sometime in its trials showing you the issues of the wings. Unless you never did any quality control on this unit and just rushed it through? Please to the CEOs of Whirlpool, I am asking you to make this right if not for good standing of your company do it at least for families like myself who cant afford to buy another machine and are now stuck with NEW machines yet going to Laundry mats. This was to be my last washing machine I would buy hopefully. I am 54 and was not planning on buying another. How do you think this makes your company look???? Im just so tired of dealing w/ Whirlpool to only hear I have to purchase a $400 extended warranty with no guarantee that they will fix the issue. If an attorney wants to step in & believes they can help us and maybe others then Yes please help us because this is absolutely ridiculous and is a product that needs to be recalled. We are out so much money now and like I said we are to the point we cant purchase another washer. We had to purchase all new appliances as they all began going bad around the same time.

I purchased an Electric Whirlpool Aqualift convection range in November of 2012. This product is garbage! The oven doesnt work well (temperature is always off), the Agualift cleaning method doesnt work well. You have to self-clean to clean it. The most troubling problem is that just after a year of owning it, the finish on the control panel started to crackle. I called Whirlpool, and all they can do is send me a replacement part for which I have to pay for and have installed. My last GE range lasted over 15 years. This range is garbage from day 1. Hate to see what it will look like in another year or if it will be working at all. BEWARE - DO NOT BUY WHIRLPOOL PRODUCTS!