We Purchased our KitchenAid refrigerator from Home Depot. After 1 week we had issues with the ice maker, water dispenser and lights going on and off randomly. Technician comes 5 days later, he half way fixes it and discovers we need to order a part. The part took over a week to get and by the time he shows up to fix the refrigerator, it has now been TWO WEEKS with out our $4,000 refrigerator not working properly. Well, after trying to replace the part and spending 45 minutes on the phone with some engineer, it still wasn’t fixed. He Says to us “hey good news youre getting a new refrigerator”. Good news my **. It’s now been THREE weeks and it turns out the new one isn’t coming for another week. Customer serves reps. are really good at apologizing for the inconvenience but Whirlpool has Done NOTHING to composite us. DO NOT BUY WHIRLPOOL.

Whirlpool washer is junk. Expired I. Less than 4 years. Cost to repair is more than new washer. DO NOT PURCHASE WHIRLPOOL PRODUCTS. Agitator motor burned up without notice. No troubleshooter problem. 2 repairmen suggested I buy new washer.

I purchased this washer and at the same time had gotten a puppy, I only mention the puppy because she is the one who kept getting blamed for what was happening to my clothes. I NEVER thought that it was my washing machine that was ruining my clothing, until I finally opened the door one day and my shirt was hanging from the top of the washer opening, and suddenly it all made sense! I kept thinking that the puppy was chewing my clothes but it is actually the washer that is sucking my clothing into the opening of the washer and when it gets stuck and the rest of the garment keeps spinning, it creates a burn in the clothing. I found out the hard way that Whirlpool will just blame the consumer for not knowing how to properly follow washing instructions, or their instructions, and will not take any sort of responsibility for it being the washer itself! I wrote to them after my father passed away and I washed his sweater in the washer and it got caught in the washer and ruined it. They blamed me for it and basically said I did not follow the proper washing instructions. I have been washing clothes for over 20 years and I know how to do laundry. I have read every inch of the owners manual and NOTHING tells you that during the wash cycle, your clothes may become sucked into the opening and ruined! So I went online to see if this was happening to anyone else and I was amazed at how many people this is actually happening to! There should have been a recall on these washers and I am amazed there has not been some sort of class action lawsuit.

My ref. stopped working. I troubleshoot it and did not work. I filled out a service request back on February 2nd, 2015. I got an email back from a subcontractor called Active Appliance INC. with a date service on February 6th, 2015, 4 days after my service request, and that is the only available date. The technician arrived while I am not at the house, however I talked to him before he started the work on my refrigerator and asked him kindly if he can call me after founding the issue, and he assured me that he will. No call and when I arrived home I found that he told the attendant that the refrigerator is not working and he has to report to the office. REALLY! We know that! Anyway I called Active Appliance and the customer services rep. told me that she could not answer with the diagnose until she speak with the technician and that will be Monday February 9th, I asked if I could speak with a manager, and her reply was Our managers do not talk to the customers. I had to hang up and call Whirlpool customer services and spoke with a nice gentleman, that he was not happy with Active Appliance INC. services. He placed me on hold and called them and within 3 minute he got back with the news, what was wrong with the refrigerator, electric computer panel burned out and then the fan continue to work with no stop, so it burned as well. He assured me that the services will be done no later than Tuesday February, 10th.While on the phone I got a call from active appliance and this time she wanted to know if I am warranted. I told her that I have Whirlpool on the other line and they assured me that I am. She said that it does not matter and she has to get something in writing. I placed her on hold and talked with Whirlpool and he assured me that he will contact them and email me a confirmation, which he did. By Tuesday February 10th, no call no follow up. I called Active appliance and they stated that it would take up to 14 working days for a part to arrive. I called Whirlpool and spoke with a customer services manager, and she got on the phone and told me that they are going to do their best and get back with me. Today February 16th I got a call to cancel a work service order due to technician calling sick and reschedule for February 25th Wednesday, I told her that they did not call to schedule the service first place, her answer was Never mind, I am calling to cancel anyway. Would you like to take this appointment or NOT? I asked her kindly to reevaluate their service procedures and the way they handle their customer, and I told her that I bought my refrigerator from Whirlpool and they are the company in charge of their product and I do not wish to continue this dialog with Active Appliance!I called Whirlpool and the customer service gentleman was helping me and we got disconnected, however when I called back they were closed for the day, however the customer service has my phone number but I got no phone call!!!! I think this is the worst POOR service I got within the last 20 years!!!!! I hope someone at Whirlpool care about their services and can contact me to handle the issue.

I bought the Whirlpool Duet front load washing machine. It was a piece of junk and I bought it 3 years ago. Sounds like a jet taking off during spin cycle and drain.Well, let me tell you, its terrible. It walks out of the space its in during spin all the time and the F Codes. Im done! Just replaced the pump and motor for the drain on the thing and unplugged it several times to reset it. Still is giving me F codes.Im done, I tell you! Done! This has been going on since we bought it!

On 5/3/16 I purchased an Amana high-efficiency, low water, top loading washer. What a joke, it is a piece of junk. There is no water so clothes dont come clean, and if you leave money in the pockets no worries. As it will be right there after the clothes are washed and dried (got matching dyer also). They dont even smell clean after two washing. And now you are to purchase a cleaner to clean your washing machine. This is truly not an efficient machine in any way.

I purchased a Whirlpool Cabrio washer and dryer from a local appliance center. Everything was working great. After some time, the washer began to have error codes. I would have to turn it off and restart using more detergent, more water and more electricity to attempt to get a load washed. I did purchase an extended warranty. I reported the issue to Whirlpool and I have had 7 home repair visits while still under Whirlpools warranty. The first time, the repair tech went under the washer and tightened a screw. REALLY! The next visit, the motherboard was changed and the issues kept coming back. Well, the Whirlpool warranty was now over so the extended warranty had to be picked up from the appliance center. Things got worse and had continued repair calls. After I had enough, I called Whirlpool and spoke to everyone under the sun. I tossed it outside and bought another brand washer. Several weeks went by and this washer still under the shed, Whirlpool contacted me and bought back my washer, GREAT.Now, here it starts all over again with the dryer, same issues with motherboard. Only this time, I am 1 month out of Whirlpool warranty and need $385 for a new motherboard plus cost to replace. I call Whirlpool again but only this time, they show no issues with this dryer and are not budging. I toss it out and again, purchase another brand dryer. I grew more angry by the day looking at this dryer sitting useless outside. I had it hauled off as trash. My question is how does a consumer protect themselves against these manufacturers? I do understand warranties but if it smells like a lemon, acts like a lemon, it must be a lemon!

I purchased top load washer and dryer from Lowes last week. When I was washing clothes the first time 12/4/18 (the day Lowes delivered) I washed in quick wash setting, machine was showing me all stages of the wash on the progress lights. It took about one hour for one load. Today 12/11/18 I spoke to your customer service associates Trina regarding the issue with my top load washer wed4815ew1 serial m82572023. I was told a technician is schedule for repair tomorrow. I try to quick wash two loads, washer progress light only went to wash mode only. I had to press start/pause, select drain and spin to remove excess water. I started 8:30 am and finish around 1 pm. I was waiting for the cycle to finish, twice all progress stages light went blank. I have no idea when it will be done. Machine made noise, not spinning, no water in it. The dryer wtw4816fw2 serial c84621285, I dry at energy prefer setting, when the clothes was dry, dryer continue without the buzzing signal to stop. I had to keep watch of the time and turn it off manually so it not energy efficient when I have to monitor when clothes will be dry.

Purchased the fridge from hhregg in August/September 2012. Model G16FARXX. After less than three years of owning it, found out today that the compressor is shot and will have to be replaced. Replacement/repair costs are ~$900, almost as much as the fridge brand new. Chatted with customer support and then would/could not do anything. I feel ripped off. If it happened after 5 years of use, then my attitude would be different, but not a major component going out in less than 3 years.

In open concept homes, manufacturers need to consider the refrigerator’s noise — ice makers included. We hear every single clink and buzz. We love (and prefer) the french door concept, but the freezer drawer, when it’s fully loaded, is difficult to open and close. Also, the stainless steel scratches WAY too easily.

I owned a Maytag washer for 30 wonderful years, so I of course bought a new one. I have battled with my Maytag (Whirlpool) front loading stackable top of the line washing machine for 2 1/2 years. It will not drain, yet sometimes it will. I have played every game with this machine to figure why. I had a repair company out 5 times while it was under warranty and they could never find the problem. It is totally unpredictable. If I could bill Whirlpool for my time and anguish I would own this company!They now say it is the computer board and I will have to pay $350 for a new service contract to fix the machine. I not very politely said that they should pay me for all my emotional abuse. They offered me another option saying they would pay for a service company to come out and look again. However, I would have to pay the labor and material cost. Since I have a stackable unit and it would take 2 technicians I would have to pay $90 for the second person. I was so mad that I called Whirlpool back and they refused to offer me that $350 charge and just said sorry. I are fortunate to have a lake house which needs a new washer. Guess what? It will NOT be a Whirlpool product. I wish I could go to the store where I purchased this holy terror and picket!

We bought all new appliances, and within a year, the range and microwave are not working correctly and the refrigerator has rust on the doors. We called about the rust on the doors and were told that it is not stainless steel as advertised and rust is not covered. Fortunately, we purchased an extended warranty, which will cover the repairs to the oven and microwave. Well see how it goes. Stainless steel appliances really arent stainless steel, so they are misrepresenting their products to many people.

I purchased a replacement gas range (whirlpool) approximately 3 years ago. Its not the top of the line, no bells or whistles such as a self-cleaning oven or such. I did love the three huge grates on top, one which is interchangeable with a flat grill. If it only worked it would be a decent range. The center oblong burner struggled to ignite in full from the beginning. Often, I light the thing with a grill lighter. But the thing that pisses me off more than anything is the F2 error that appears 70% of the time on the control panel when I am preheating the freaking oven. I am NOT replacing the control panel on a $400.00 range. What I have discovered is I can hit off my power at the main, not once, but 2-3xs and reset or over ride the damn thing. I read this F2 code is a common occurrence so I got to thinking, why? My conclusion is the heat from the oven is vented up & directly on the control board panel. Really now, whos bright idea was it to expose a control board to repeated temps of 350+? Hate this appliance. Next range will NOT be a new one, Im looking to replace this junk with something mom or grandma had that lasted decades, not a couple years. Shame on you Whirlpool for producing such low quality, disposable products. By the way, I just went through this with a new fridge so theres much to be desired with new appliances. Theyre junk, designed to fail.

When I first bought this machine I loved the big tub, but I was concerned that there was no agitator. It confuses me how clothes can get clean if there is nothing to rub them again. Even in the olden days they rub clothes against a board. Well my concern is valid and I believe the washing machine industry needs to go back to the old model, as this new version does not work.Here are all the problems: 1) The machine judges how much water to put in. This doesnt work. I follow the directions and outline the perimeter and dont overload, yet still it just barely puts in enough water to make the clothes wet. Im all for conserving the environment, but enough water needs to be provided to actually get the clothes clean. I would like to be the judge of how much water should be used, so I would like to be able to tell the machine if it is a small, medium or large load. I do believe that the lack of enough water is why the clothes do not come out as clean as they should and why they end up smelling (see #4). 2) There is no agitator, so there is really nothing available to help clean the clothes. Spinning them around like a maniac is not enough, which leads me to the next problem. 3) The clothes come out twisted terribly and then many times come out of the dryer wrinkled because of how hard they were twisted. I tried to select a less harsh spin cycle, but then the clothes are too wet to put in the dryer. There is no happy medium.4) Biggest problem to date: Our clothes/towels have all started smelling. You know that smell when you leave your clothes in the washer too long (like two days) and then put them in the dryer? Its that smell. The clothes/towels dont smell when you immediately take them out, but they do smell at any bit of moisture. When I dry myself off after the shower, I notice the newly washed bath towel smells like a wet dog. I have used the pods, liquid detergent and powder. I dont remember having the smell problem when I first bought the machine and used powder, so I just returned to using powder today. (Ive even tried doubling up on the pods, but the clothes still smell.)This leads me to problem number 5: When using powder in this machine, the machine does not empty the powder container completely, and so the clothes do not get the required amount of detergent. Often there are clumps left over in the powder dispenser, but not always. (This is what led me to go to the pods and liquid detergent in the first place.) But at least with powder (I use Gain) my towels dont stink after the first time I used them.I wouldnt recommend this machine. I really researched machines before I purchased this one, but they all had bad reviews, so how do you pick? And I never look at the good reviews because we all know so many people are paid to rave about products they know nothing about, or it is a company employee writing the review. This machine is a huge disappointment. I am going to try adding a rinse cycle like a previous reviewer suggested. Maybe the extra water will help with the smell. Of course this is not good for the environment though, so this whole way of making washing machines with no agitator and limiting water defeats the energy efficient goal.

Overall the stove works well but it is horrible to clean. You have to use a lot of muscle to get the spills up from around the burners. It is hard to get around the burners to get all the spots off. The gas burners work well & cook evenly.

I am very reluctant with online product feedbacks. But here is one story that needs to be told. I purchased a Whirlpool 3D Split AC 2 years back (and hence the product is out of warranty). The product quality is so bad (and unreliable) that within 2 years the coils in the Outdoor Unit have started to leak. When I requested for service visit the technician (so called) came over and did a wet service and took the fee (without an invoice). And assured that the AC would start to work fine. Within a week we realized that the AC is not cooling enough. Again a service visit was called and this time the technician (supposedly) diagnosed the above problem. The repair cost told to me is to the tune of Rs 10,000/- for a product cost of Rs 36,000/- (or so) bought just 2 years back. Does anyone in Whirlpool understand what QUALITY means??? Does anyone understand VALUE FOR MONEY... This aside I have a 2 Tonne Whirlpool AC, 350 l Whirlpool DD refrigerator and a Washing Machine... I think its time for Move over WHIRLPOOL and HELLO MITSUBISHI, BOSCH, HITACHI... End of a great consumer brand...

We purchased KitchenAid Model YKESS907SS05 Electric Range from Appliance Canada April 2012, just before we took possession of our new home. We began using the range in July of that year and it worked well until September 11, 2014. At that time we decided to use one of the features of the range which is the self-clean feature. During which the control panel failed and our oven ceased to work.We contacted Appliance Canada and they suggested a technician come to assess. We called the suggested number and they send a technician that was not Whirlpool certified and we had to pay out of pocket for the visit $158. He did absolutely nothing during the visit. We then called Whirlpool Canada and they informed us that he was not Whirlpool certified and to call Appliance Canada, we immediately called Appliance Canada and made arrangements to have certified technician come to assess. Whirlpool Canada also indicated at that time that the board that failed was still under warranty and we should not have to pay. September 22nd the second technician came to assess the situation, used tape to cover the front blowing air duct so as not to have the hot air blow back onto the control panel. This was a temporary fix, they ordered a control panel in the interim that they would then use to replace. The control panel came in October the 22nd, was replaced and the new board was faulty, put old one back in and re-ordered another board. The part was on back-order. By mid November, after numerous calls, we called Whirlpool directly. They authorized that the technician to get the part from another supply source. On November the 26th, technician came back - tried new board could not get it to work, left it with us and ordered additional parts. At that time the technician who was taking the case had a family emergency and would not be able to come back out until the new year. Subsequently, Appliance Canada authorized a new company to resume our work with a new technician (Toronto Appliance). He came out December the 17th, with the board that was left behind, he was able to get the oven working. December the 22nd while in the middle of cooking a meal, the oven failed again. We called Appliance Canada and they had a Technician scheduled to come December the 24th from Toronto Appliance. However, on December the 23rd the oven resumed working. The Technician came on the 24th but because the oven was working again could do nothing. On December the 31st, while dinner was in for guests, the oven failed yet again. We called Appliance Canada, yet again, and they scheduled another visit with a new control panel and additional board. The technician arrived again today, January the 28th, and could not get the stove working. He was instructed to order an additional part and we are to wait another 2 weeks. In total, we have been waiting for 4 and a half months, we have also been told that we were not to have used the self-clean as this causes these types of problems. Why is it offered, in addition, Whirlpool has not supported our direct calls, nor authorized the replacement of a product, that for all intents and purposes, is faulty. We have had no success in the resolution of this issue nor support to reach a resolution from all parties involved. I would suggest not buying any product from those involved as their lack of support for their product is appalling.

After 1 1/2 years, My new Cabrio washer lid hinge started to come apart and wont latch, so machine wont run. After a day or so it completely popped up and out of align. The lid has PLASTIC hinge. This is obviously a problem. We have been in touch with Whirlpool, but they say they cant help?? This should be a recall. We have been waiting on back order for a replacement Lid at OUR OWN EXPENSE since Sept. 20, 2015. I want to get this fixed and use my Machine again. We are Senior Citizens and this machine is used 3-4 times a week. Not abused.

I have purchased in the past all Whirlpool appliances all at the same time. Washer, dryer, dishwasher, refrigerator, stove, microwave and I have had issues with every product after the first year, from plastic parts failing. That should have been made out of metal, to motherboard replacement. I work Hard for my Money, and when I need to buy a new appliance, I want truth in advertisement of what I am spending MY MONEY on. I would like a product that is built to last!!! If whirlpool cannot offer this we need to COMPLAIN all over the Internet until whirlpool changes their design and uses better parts for their products. I as a consumer deserve this.

Purchased the 2015 Whirlpool Cabrio. Today 5-2018, the panel went completely out. When I called the store (Lowes) they asked if I purchased the warranty. I responded no, she went on to say, “Well since you choose not to purchase the warranty youre stuck”. Even if I paid for the warranty a washer should not break down in less than 3 years. My previous washer lasted 18 years with no problems. We purchased this washer because of the larger load. It was one of the most expensive washers. It’s a piece of junk and the manufacturer will not stand by their horrible product. Please DO NOT buy! I will be filing a formal complaint.

I had purchased a washing machine trough CSD canteen and go for AMC for five years on September 25, 2006. In September 2010, I lodged a complaint and the Engineer visited and asked for a replacement of the bottom cover. I said okay, but later on he told me that I have to replace the complete outer cover. I agreed and asked them to replace it. The cost is fixed for 2,500Rs. They replaced the cover but did not replace the bottom cover.I talked to the agency and they agreed to hold to 1,000Rs for the bottom cover and I paid to them 1,500Rs. Later they brought an old cover and I refused to replace that. They told that the bottom cover is not available. Then they never tried to replace the bottom cover. I arranged for the same from the local marketing for 600Rs and replaced it. I paid the service charge for the engineer.Later, I lodged a complaint that the machine was not drying the cloth. The engineer visited and told me that the belt will be replaced on payment. I agreed and he told me that I will visit the next day and replaced the belt. But he did not come until it was late.On September 18, 2011, with number DL0911018283, my machine was not switching on and I lodged a complaint to customer care. But no engineer visited me. Then I regularly complained but there was no response from the agency. On September 23, I talked to customer care, Mr. **, that I am going out of station and I lodged a complaint from the last five days that no engineer visited me. My AMC is expiring on September 25, 2011. I will come back on October and then send the engineer. On October 9, I reminded them that they refresh my complaint with number DL1011007031. The engineer visited and told me that the PCB of the machine is faulty and I have to pay 3,500Rs.I told him that I complained for this problem during the AMC period, hence they are supposed to repair my machine free of cost but he refused. I talked to customer care and tried to resolve the issue but I was not successful. Then I talked to Mr. **, the head of Customer care in Delhi, on October 12. He promised to resolve the issue but no engineer visited me and my machine is still defective. On October 13, I tried to contact Mr. ** several times but he or his PA is not picking up the phone. Now, how will I get to repair my machine?

I like the top and the stainless steel finish - its electric and so the inside is a pain to clean. Flat top - burners heat well/oven gets up to temp fast. Cleaning the outside isnt difficult, I use Bar Keepers Friend on the SS and Wegmans on the flat top - for the back black splash Mrs. Meyers - so its 3 products but its also 3 minutes. I live alone and so use is minimal as well. Im not sure Id like it in a busy house with kids.

I bought the Whirlpool WTW 5000DW1 washer and dryer to go with it. Within the first 2 weeks the plastic handle broke on the dryer. Ive been using the corner of the plastic handle ever since to open the dryer. The washer is the worst washer I have ever purchased in my life. The tub doesnt fill up over the clothes half the time. It is perfectly balanced on the floor but it always bounces around and you cannot open it to rearrange the clothes because they lock the lid. The only option is to try to hold it and wait for it to finish or start over by pressing the button for at least 3 seconds. I have had a few items get shredded by it and a lot of times the clothes dont get cleaned and rinsed properly. Even on 2 rinse option. Just the fact that it has a 2 rinse option is a big red flag. It is supposed to be a energy saver and water saver but that isnt true. If you have to wash and rinse the clothes twice because it has spots from the detergent still on the sheets, something just isnt right. Whirlpool shouldnt even put a product like this on the market. I have owned many Whirlpool products before this but this is the last Whirlpool product I will ever buy. Obviously Whirlpool doesnt test its products or care about quality.

I purchased this washer brand new just 2 years ago. It started making loud crackling noises approximately 3 mos ago. Yesterday it decided it did not want to spin or drain. Today a repairmen tells me its a wash. The computer screen has gone wacky and the cost to replace that will be well over $400, almost to the penny what I spent 2 years ago. This is not a good product Whirlpool and i trusted you since my previous washer lasted over 15 years. I need a refund and a new washer! Disgusted!

I have a whirlpool water heater. This is the third or 4th time that the upper sensor failure code has come on. Our water heater turns off all the time and we have to fire it back up. In the past few months, it has started pouring water out from the long tube on the side of it anytime we turn it on for more then 10 minutes. The last time we called a plumber, I was trying to get a quote on a tankless water heater. Ive been so fed up with ours and I thought that would be a better route to go. The plumber explained the negative sides to a tankless water heater and explained that our water heater was a really nice, really expensive and fairly newer model. I told him that I had just gotten it about four years ago. He said he could just fix that one. So after looking at it, he acted as if he didnt know what an upper sensor was and told me it was under warranty and that I should call for the parts. Every time we have called for the parts, they send the same box thing on the front of the heater and every time, it doesnt fix it for long before it says the same thing. And now, like I said, the water heater has now added the problem of pouring water out of it. I need help. I dont know what to do. Im tired of not knowing if Ill have hot water or if the water heater is going to pour out water. Im pregnant and worried that if we cant get this fixed Ill continue to have this problem along with having a baby to take care of. Please help.

I bought Whirlpool Cabrio washer two months ago (Model number : WTW7300DW0). They indicate washer use less water and clean better, but that is not true. Some clothes on top of the load were not even getting wet and clothes smell bad after washing. Even worse is that clothes got holes in many places and some clothes were totally destroyed after washing. In just two months, I have to throw away many of my towels and clothes. I dont believe this kind of washer should be sold again. This should be a recall to give us a replacement ASAP and remove any products still in the market. There are many complaints online, I hope someone will stop this and do the right thing.

Sixteen months after I bought the Cabrio washer (model # WTW7800XWO), the F1 error light came on. I had to replace the electronic panel on the machine for $400. Whirlpool refused to replace it even though they have been replacing this panel for others. This is a common problem with the Cabrio washer.

Just had the repairman at my house to repair my 2-year-old Whirlpool refrigerator Model GB2F4DXWS07 - he couldnt fix it. Just throw it away and get a new one. There is a blockage somewhere in the line, he suspects the lines were not cleaned before it was charged at the factory. Repairman said it was a typical 20-year-old refrigerator problem. Customer service was no help - Whirlpool live chat is currently unavailable. Lousy product with worse service. I will never buy another Whirlpool product.

I bought this washer (Whirlpool Cabrio) about 4 years ago. A year or so later, it started leaking; based on reading the troubleshooting guide we found that this was because the feet would continually get out of balance. After painstakingly re-leveling the washer every 6 months or so the washer now consistently leaks - even though its balanced/level! $508 to repair a machine I paid $787 for. No thanks. I agree too with the other reports that it doesnt get clothes clean. I just figured this was a feature those of us got for trying to be energy efficient.

It has plenty of room. The compartments within the refrigerator are well organized. There is plenty of room in the freezer. Have had this for about eight years and going strong.

After less than 3 years it was the bearings, of course. Then, being handy and not stupid enough to pay the $500 for the whole piece of crap Whirlpool/Maytag tub, we bought bearings from the PartsDr. We just didnt dig deep enough to know that the strators on these things are made out of the cheapest Chinese plastic and are cracked in the SAME TWO PLACES EVERYONE ELSES IS!!! Imagine that? Will scrub my clothes in a river on rocks before I ever buy a Whirlpool/Maytag Chinese again. All front load seem to have the same problems but at least some other companies admit it and are trying to correct it. Will research and as with everything else stay away from the USA/Chinese rusty, corroded junk.

2016 Cabrio Washer - I had an 11 year old Maytag washer that finally gave up so rather than go through the repair I decided to upgrade to a new washer dryer and went with the Whirlpool Cabrio W/D pair. I am shocked at the washers inability to clean even the most basic of stains. I have to pre-treat clothes like never before, have tried every type of wash cycle offered and cant believe the amount of time it takes to clean clothes. Over one hour??? My Maytag may have agitated the heck out of a load but in less than 30 minutes everything was clean. Ive had to re-wash load after load of the most basic everyday stains. I was hoping the larger drum would allow me to cut my laundry time down but that is not the case, and find myself putting a few things in at a time so they get washed. Im stuck with this piece of crap and have only had it for one month... Cant wait for it to start breaking down and dealing with repairs as so many of these comments mention. I miss my Maytag!!!

Bought this 18 cu ft refrigerator this year. Only 3 choices for temp. Everything freezes, milk has crystals, ice cream is soft. Buyers remorse! Old ref was a Whirlpool. Wished I would have given others a chance.

This has been our second Whirlpool Hot Water Tank in our home in the past 14 years. The first was installed by the builder, when it went out we purchased a larger capacity one from Lowes. It was professionally installed and now, after the extended warranty coverage period is expired, its expired as well. I would think you should be able to get more than 7 years out of not one, but two Whirlpool hot water tanks. No wonder they are no longer manufacturing hot water tanks - they sucked at it. Also, if you do have one, you have to get parts from Whirlpool and pay $30 shipping. No thanks, for the cost of parts to replace everything youre better off getting a whole new unit.

I purchased a new Whirlpool stainless steel French door refrigerator MSRP for $2,500 in good faith. If something were to go wrong with the appliance, Whirlpool would fix the unit as applicable under their accompanying written Whirlpool Corporation Major Appliance Warranty for the duration of one (1) year from date of purchase. However, this has not turned out to be the case at all. As per their written Whirlpool Corporation Major Appliance Warranty for one (1) year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation will pay for factory specified parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Whirlpool designated service company.My refrigerator was purchased on 10/27 and delivered on 10/28. Service repair performed by a Whirlpool designated service company was on 11/30, 12/30, 1/9, 1/18, 2/9, and 2/23. A future appointment was scheduled for 3/22. Whirlpool’s designated service company notes from 2/9 specifically state that the refrigerator will not run and parts were ordered. Whirlpool’s designated service company returned on 2/23 for parts installation and noticed that other components of the appliance were not functioning properly and proceeded to call the tech line for support. After hours of troubleshooting and multiple failures to function properly, the service company deemed the refrigerator as un-repairable and clearly stated in their notes that the unit was not cooling, there is a manufacturing defect, restriction in the units seal system, and the unit needs to be replaced. I was instructed that the tech line would complete the ticket, send the information over to Whirlpool Corporation, and I would need to follow up with Whirlpool’s customer service to set up the delivery of a replacement and haul away of the non-working defective refrigerator.Furthermore, the company (manager Wanda at the TN office), had already promised to replace this unit if the service repair performed on 12/30 did not fix the unit, which the company has never honored and has since decided to recuse themselves of this promise made on behalf of their employee. In addition, this Whirlpool manger (Wanda at the TN office) even gave me her direct phone number and extension to follow up with her. She has never answered any of my 10 phone calls over a period of 3 weeks and never attempted to return a single voicemail that I left for her. Since the promise of a replacement refrigerator, I contacted Whirlpool by phone on the following dates: 12/30, 1/3 and 1/16; 1/17, 1/19, and 1/30; 2/20, 2/24, and 2/28; 3/2, 3/9, and 3/13; and 3/15, 3/16, and 3/19. I as well have emailed them information they have requested on 2/20, 2/24, and 2/28.Below is verbatim of the last few Whirlpool customer service representatives that I have had correspondences with.2/28 (Tabitha): I have sent in your information for the PEX (replacement unit) since I see here that your unit is un-repairable. Someone will continue to contact you within 24 to 48 hours to go over the PEX process with you.3/2 (Brittany): I see we received your file on March 1st; however, it was denied because the request was blank. Can I place you on hold on a moment? (After a long pause) I apologize for leaving you on hold so long. Your records were listed under two different accounts on our end with one being linked by your phone number and another being linked by your address; therefore, all of your records have probably not been viewable. Upon further review of your information, our Whirlpool designated service company that performed service on 2/23 will have to call into the tech line to complete their notes before we can proceed. No, you cannot speak to a manager. If you wish to have a manager contact you, one will do so within 24-48 hours. You cannot speak to a manager because at this time there is nothing they can do to assist you; unfortunately, this process is moving along at its fastest place and there is nothing more we can do for you at the moment. There is nothing that we can accept from you to speed this process along, even though your copy of the service company’s receipts include the statements of work from our designated service company. If you wish to escalate this matter, you can write to Whirlpool Customer Relations Department at 553 Denson Road.3/9 (Kia, supervisor): Although our designated service company may deem your unit un-repairable, Whirlpool has to deem your unit un-repairable for a replacement to be issued. At this time, Whirlpool does not deem your unit un-repairable. You will need to contact our designated service company and have them forward over your information. I am the highest level of supervision for the company and if you wish to escalate this, you can write to Whirlpool Customer Relations Department. Their mailing address was already provided to you previously. At this point, our conversation is over. We will not be replacing the product as we do not determine it to be un-repairable. Thank you for calling Whirlpool. The information we have discussed will be documented. I am the highest level of management for the company, so your request to be transferred to management is denied. I am aware of everything you have said and I have documented this information. At this time, I am done discussing this with you and will now hang up the line.This kind of customer service is not only discourteous, but it is despicable in the upmost matter. This displays complete corruption in regards to the written warranties provided by Whirlpool Corporation that come with your Whirlpool product at the time of purchase. Currently as it stands on 3/20, my $2,500 valued Whirlpool refrigerator is just under (5) months of the purchase date and has been deemed as having a significant manufacturing defect, as well as needing replacement by Whirlpool’s designated service company that they hold a contract with. Yet, Whirlpool refuses to replace the unit and refuses to speak with me based on the ground that only their contractactually designated service company deems the refrigerator as un-repairable, but they do not. My refrigerator has not worked in weeks!From reading the Whirlpool appliance product reviews online, I discovered that I am by far not the only consumer that has suffered from victimization on behalf of Whirlpool Corporation. I saw numerous consumers who had purchased the exact same product (matching model number) as me, had issues, and Whirlpool refused to assist them. Therefore, I think that we as consumers need to take a stance to stop these unethical practices of Whirlpool Corporation and demand that they honor their written warranty for their products. This company’s abuse and neglect of their consumers is absurd.

Best stainless steel built dishwasher we could find in this price range. Well built with lots of room and easy access to both drawers. Easy to clean filters and a nice modern look.

Have always bought Whirlpool appliances and never had a problem like this. Open the door on the top loading washer and its rusting out. I am having to buy a new one but considering other brands. No complaints about the matching Dryer.

In June 2010 my wife and I bought a new Whirlpool water heater (model ee2h50rd045v). As I have fairly extensive experience in both the electrical and plumbing areas (was head lab technician for an aquatics lab for 7 years and worked with maintenance on a farm for 10 years), I installed the unit myself. Two months later the motherboard fried. Whirlpool sent me a replacement and all was fine. Six months after this the motherboard fried and set the unit on fire. Luckily I was home and caught it before it got out of hand and the circuit breaker had tripped when this happened (the circuit breaker saved the house).After I had ripped the smoldering unit out of the garage I immediately called Whirlpools Customer Hotline and told them what happened. They said they would send me replacement parts. I reminded them that the motherboard had fried once before and that this time the unit had almost cost me the house. I also informed them that I have now worked for Lowes for 4 years and I am responsible for selling their product (in addition to other brands). The lady stated all they could do was send me new parts and the problem probably was with my circuit breaker. I informed her the circuit breaker was tripped so the problem was not there. She reiterated that all they could do was send new parts.The next day I started to remove the control panel and motherboard to find that the plastic had fused itself to the frame and insulation. I called the customer hotline and spoke to someone new and informed them about the new problem with the melted plastic. I was told that the melted plastic could be scrapped off safely and that since the problem was not the circuit breaker, the problem must have been how the wires had been spliced from my conduit into the water heater. The gentleman then proceeded to tell me how to do it in violation of Maryland code and told me he would have replacement parts sent to me. I checked with a certified electrician to make sure my wire splice had been done in accordance with code and he verified I was correct.I then had a Department Manager call Whirlpool. He was given the same runaround and told the parts would be mailed to me. He was also given the story about how the malfunction was due to the wire splice being too tight. He then asked to speak to the representatives supervisor and she told him she would not transfer him over to her supervisor. I have forgotten to mention that 2 months prior to this, a Whirlpool water heater (same model) had been returned to my Lowes store within the 30-day purchase window. The unit had caught fire. Since I had had problems with my unit motherboard at this point, I took that unit apart to see what had caused it. The problem started with the motherboard in that unit also. This is unacceptable. Whirlpool obviously has product quality issues.Sometimes bad units are put out. This happens with every brand. But when the same model has such a high failure rate and is known to catch fire, Whirlpools actions are inexcusable. Currently my refrigerator, oven, dishwasher and obviously the water heater are Whirlpools. I will not replace either of these units with a Whirlpool when they reach the end of their operational periods. Also in the future when customers ask me about Whirlpool appliances, I will be sure to tell them just how great Whirlpool is, how reliable they are, how great their customer service is and then quickly usher them over to Samsung, Frigidaire and Electrolux appliances. The department manager that had called Whirlpool for me has shared similar sentiments about future customer recommendations.

I have had too many problems with the thermocouple beginning about two years after I purchased the water heater in 2003. Whirlpool keeps replacing the thermocouple, but I have to pay for the plumber to come out and repair the unit. This runs me about $180 each time. The thermocouple has burned out three times since September of this year. The plumber didnt charge me anything the second time it went out. But it went out for the 3rd time today and he recommended that I replace the unit. Of course, it is out of warranty and Whirlpool was happy to tell me that I could purchase a new thermocouple at my own expense from them. I have paid for this water heater three times over with repairs. Whirlpool knows that there is a defect with the design of the water heater. There is no way that a regular consumer can get inside the water heater to clean it. I will never purchase any Whirlpool products ever! I advise anyone reading this to follow suit.

Whirlpool has been a well known brand for many years producing well made appliances. With strong customer support and appreciation. I myself have owned many appliances made by Whirlpool from Fridges to Washers and Dryers with no problems.

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

I was excited to have an energy efficient washing machine and chose the Whirlpool Cabrio top loader. I truly wish I had read reviews rather than trust the salespersons advice. It does not clean clothes properly at all. They come out smelling dirty and are covered in white goo, even when the machine has just been cleaned. Stains never come out despite all of my efforts. Now I have water leaking out of the bottom as it fills. Not impressed at all. What a giant waste of money.

We purchased Whirlpool Cabrio Washer WTW5600 series in October of 2010. I bought the machine from Sears and also bought the extended warranty. Less than 6 months after I had been using it, I noticed that all my husband’s shirts were getting sweat stains under the arms and my hand towels were very smelly after drying with them one time. I called Sears to have someone come out and tell us what the problem was. He said I was using too much detergent so I reduced the amount of what I was using. It did not help the problem so I started using the extra rinse each time I washed, still did not fix the problem. I called them out 3 more times in 2011. One tech told me I was still using too much detergent so I reduced down to 1 tablespoon like he suggested. I stopped using softener in my washer because he said I needed to clean my machine more than one time a month, to clean it every 3 weeks. No solution to the problem still. I have had a tech from Sears and one from Whirlpool (who incidentally was the same man, he was from A&E Appliances). When he came in the door, my husband told him he had been here before and I said 2 times. He lied and said he had not been out before. Are we blind? No. He ran the cycle but sat in his truck while he was running it. None of the techs have ever put a tool on the machine to check if the water level is right. They just stand there and tell us to change the amount of detergent or clean the machine with Clorox more often. I cleaned it 8 days in a row and the clothes still smell and still do not get cleaned. We talked to main man at Whirlpool and said they couldnt do anything because their 1 year warranty had run out. We have been using Whirlpool appliances for over 30 years but I will not ever buy another one. I have probably had 5 Whirlpool washers over the years but never had a problem until we got this Cabrio top loader without an agitator. I would not recommend this washer to my worst enemy, if I had one.

I purchased this refrigerator, approximately 3 yrs. ago. Right away the top crisper broke. I have put up with this broken crisper only to have broken the PLASTIC lips that hold the crisper to the top shelf. Piece of junk. I looked to order a new crisper but way to expensive so I just suffered thru. I cant even use it anymore as I cannot open or close it without it falling onto the bottom crisper. Would like to throw the thing out, but cannot afford another one. IT WILL NOT BE A WHIRLPOOL!!!

Bought a Whirlpool Gold stainless steel refrigerator and the thermostat didnt work after a couple months of use. Lost all the product in the refrigerator and freezer and whirlpool would not compensate us. They did pay for the $29 part because it was under warranty but still think it was completely their fault for putting a defective thermostat in it. Last night the relay on the circuit breaker stopped working and I again lost all my refrigerated food overnight. This time it is not under warranty because the warranty was only good for one year. So, I just paid $314.03 to have it repaired. So angry that I spent so much money on 4 Whirlpool Gold products when I remodeled my kitchen.

Purchased a Whirlpool hot water heater from Lowes. Heater has 6 year warranty. Hot water heater is 1 year old and the pilot would not light. Contacted Whirlpool warranty department to what the failure cause. A new control was sent and replaced by a qualified journeyman plumber; still not working. Called whirlpool warranty department, told control valve must be faulty. We have gone 5 days with no hot water. I am not waiting another 5 days to get hot water. I am having the plumber take out this worthless Whirlpool heater and haul to the scrap metal business. That is where I should have sent it from the get go. Dont purchase a Whirlpool product. The money should be spent on a product that works and will last.

We purchased a Whirlpool refrigerator because of the brand in August of 2011. Its December 2012, the entire door needs to be replaced. It appears the cost will be as much as the original $750 investment! We called Whirlpool expecting they would stand behind their brand after hardly 18 months, but no ... It is clearly a defective door to begin with.

The machine Will Not Clean the Clothes. Had to Buy A Maytag Washer.

Like the load sensor feature the best, so economical, the drum is oversized to wash duvets and heavy blankets. The fact that the washer and dryer are stackable makes them ideal for apartment living.

Brand new dishwasher never worked. After getting the runaround from Bethel Park Home Depot. I was told I had to call Whirlpool. After being on hold 3 separate times for more than 12 minutes each time, they scheduled a repairman in a weeks time. He said the motor was bad and had to order. Wont be back out until after Christmas. I asked Whirlpool to replace this lemon. Customer service told me they never replace if they can fix. What if something else is wrong? They didnt care. Very rude. Told me manager would tell me the same thing. Never buy Whirlpool. Appliances are faulty and customer service rude. This has been a nightmare experience. Feeling very helpless at this point.

I purchased a compact frontload washer. At first, I was getting a code f30, which took the technician weeks of coming to my home and changing different parts to finally accomplish that problem. After that, the machine would not go into high spin to wring the clothes out. So everything comes out soaking wet. After two different companies (Herbs Appliance and DanMarc Appliance which I got from my service contract) changed speed control, board, latch control, main computer, and top control board, the machine finally worked for a little while. Not long after, the machine is no longer wringing out once again. I am no longer under contract but had a repairman out three times to inform me this machine is a lemon. Whirlpool tells me I am no longer under contract, but my argument is this is not a new problem but a preexisting one.

We bought our stainless and black Whirlpool stove last month. We love that its black topped, and doesnt show dirt. We love how the oven door seals, and the fast heat. What we do NOT love, is how easily the knobs turn. You barely brush against them, and gas leaking into the kitchen. I called for service. Our guy said yes, they turn easier than most of the stoves he has worked on. He called tech support from my kitchen, and I overheard the guy at the other end. His response was dismissive. I have had gas ovens for 20 years. They have without exception, had a spring type feeling to the knob. This stove has none. I am writing this so that if others are experiencing the same thing, they will see it is not their imagination. Something is wrong with the design of the knobs or some part is missing.

Very bad model Whirlpool washing machine. Pls dont buy any customers because from the date of installation its a headache for my family. I have a trust on whirlpool company but now I dont have. The problem is in every water select mode the tub is filling full and overfilling from the top always room fully with water. I hope the machine is not sensing water level. Such a bad experience from whirlpool company. My review is genius. My date of purchase is 28/7/2021

I got a new Whirlpool dishwasher and it is totally unacceptable. Its supposed to be energy efficient and the eco setting, which is supposed to be the most energy efficient, takes 3 1/2 hours and does not do a good job, doesnt dry the dishes. Ive tried all the settings and some take over 4 hours. I have talked to someone at Whirlpool twice and they say thats the way it works. How can anyone put out a product that doesnt work and get away with it? I had my last Whirlpool for over 12 years and it took not even an hour and did a wonderful job.

We purchased a Whirlpool side by side from Lowes and an extended warranty. Immediately maybe a month the ice maker froze. Ice container in the door. Repairman said design is notorious for this problem. This was an ongoing problem. They replaced icemaker and it continued. Finally the warranty people told me it could be deemed a lemon if repaired for the same issue 4 times in a year. They deemed it a LEMON and I received a store credit for the purchase price less the warranty amount. I purchased a new LG French door. No issues and its been 5 years. If you have an extended warranty do some checking on the lemon.

We purchased a Whirlpool Duet machine in September 2010. About a year ago, I started noticing tears and stains on clothing. Luckily, it was always on a washcloth or blanket, nothing special. Last week, it tore a 3-inch hole in my good jacket. I was not happy! My husband and I checked inside the drum and all around the seal. Neither of us found any rough edges. I thought if I called Whirlpool, they might have had a recall. They assured they had never heard of this problem. REALLY!!! Just look at all these e-mail complaints. Back to the old top loading - basic wash machine. Definitely not a Whirlpool!!!

I bought my washer duet (model WFW94HEXL2) in Sept. 2011. Today is Jan. 2013 and it has been a year and four months since I got the washer. I decided not to buy an extended warranty. Its only my husband and I at the house so we take really good care of our appliances. The washer stopped working and is giving me a code F-6/E3/E1. Basically, I need to change the central control unit ($350), door latch ($120) and labor ($180), for a total of $656.13. Really? I paid $1,105.00 for the washer. Im really upset. I called Whirlpool and they said the item is out the warranty and there is nothing they can do. I am really upset.

The space could be laid out a little better. The flimsy shelf is not real stable for foods or ice tray. Where the shelf locks into the side wall is not deep enough to stabilize the shelf itself. The flat indentations in the bottom, where they meet the front, have an edge that makes properly cleaning the freezer a bit difficult.

Purchased a Whirlpool Dishwasher in 2017 as part of a kitchen remodel. I have always had General Electric appliances, and shouldve never changed my brand. I had to have this dishwasher fixed a month after purchase (this shouldve been a clue that this was a lemon). Fast forward to two years, I know have to turn the power off to the dishwasher after 3 uses otherwise it stops running mid cycle and the re-set lights blinks. Ive had a repair person take the thing apart to try and find the problem (at the cost of $250) with no luck. The repair person contacted Whirlpool to see if they could help troubleshoot, the response he received was because it was no longer under warranty they wouldnt even answer his questions, hows that for customer service????

Whirlpool Washing Machine WTW4800XQ4 - This is an expensive piece of garbage. My clothes come out with lint still on them. They do not smell clean and in fact, I wonder if they even are. My blankets come out heavy and soaking wet, so much so that I have to repeat a rinse and drain cycle before I can place into the dryer. The machine is always off balance and its so loud that my almost deaf grandmother who cant hear a thing wants to know what that noise is when shes halfway across the house each time Im doing laundry. Ive called Whirlpool and they have sent a tech out who insisted it was I who did not know how to load a washer and that was causing all of the problems. I found this interesting since I am 37 and never encountered difficulty with a washing machine before. Our visit concluded when he insisted it was user error and went on his way. The next day, the washer was not even cycling, and I phoned whirlpool back. This time, there was a computer problem and there was no arguing about it. The technician came back out reset the internal computer. The machine seemed to run more quietly for about a week, but went right back to its old loud self. The only improvement Ive noted since then is it does not move across the floor now while washing. I wish I never bought this thing and would certainly never recommend it.

I have a Whirlpool dishwasher that is under warranty. The dishwasher failed and Whirlpool service gave me a written report acknowledging their part had failed. It caused $20,000 worth of documented damage. Their adjuster came out after waiting for one month. I have a claim with them and no one contacts me. For a few weeks I was dealing with their legal dept and they said they were going to turn it over to the company that made the defect part. To which I advised them Whirlpool did the damage, I will deal only with them. Since then their legal dept has not answered one email. Whirlpool is trying to put the damage on another company rather than themselves. I have heard from NO ONE. I bought a Whirlpool dishwasher and their tech and their adjuster confirm the damage. Now here I sit one month later, cabinets destroyed, floor destroyed and garage ceiling as well as kitchen walls destroyed and at one point Whirlpool says maybe you should put it through your homeowners, they would pay you faster. I say Whirlpool dishwasher did the damage, Whirlpool should pay. WHIRLPOOL BUYER BEWARE!!!!! ANY QUESTIONS YOU MAY CONTACT ME AT **.

This $1,000+ Whirlpool Cabrio washer high-efficiency machine should have lasted between 10-15 years, not 1, not 2, not 3, not 4, not 5! To expect less is to fall for the consumer cave in - where you just give up, give in and buy another. The Whirlpool tech just told the appliance repair guy that was here that the repair would involve a recirculating water pump and a bearing, and would cost $481 to repair. The appliance repairman said he is not in business to condemn appliances, but said he has a Kenmore top loader at his house. Simple, no electronics and less things to go wrong. Well after researching brands and reading reports, I thought I was buying a machine that would last at least as long as my second hand Maytag. Whirlpool has not heard the end of me. I have heard several other people say the same thing. Repair bills are huge and machines do not hold up. So much for buying quality. Now Im going to contact the MA attorney general for the states implied warranty, which means if you spend your money on any appliance, that appliance has an expected lifetime of service. A $1,000+ machine is not expected to fall apart after a few years.

We purchased this Gold Series Whirlpool Dishwasher about 4 years ago. It worked very well up until April of this year. At that time, the main pump stopped working and it has to be replaced. There are just two of us in the household so the dishwasher was only used 2 or 3 times a week. We also kept it very clean with no build up. The gasket around the soap dispenser came out and one of the wheels fell off of the bottom rack. We just feel that 3 1/2 years is too soon for a major appliance to stop working and fall apart, especially given the light usage.

We have had our Cabrio for one year now and we found the agitation cycle to be loud but we have gotten used to it now. The thing we cannot get used to is the sour smell permeating from it. It smells like a dirty mop. Our washer and dryer are in a small laundry room so when we enter it to get to the garage or bathroom, the smell hits you like a ton of bricks. Stinky!!

I bought a Cabrio Washer and Dryer around January 2015 at Lowes. After going through the worse service imaginable, the washer was like pouring salt in the wound. I like the dryer fine, but months later, Im still unhappy with the washer. While it washes OK, it takes forever to wash a load. Most of the time, it does not spin the clothes out enough. There is no way to just spin again. You have to go through a rinse/spin cycle and you may or may not get lucky with a sufficient spinning. Why cant they just have a spin cycle and why does it have to take so long to wash a simple load of clothes? I have bought many Whirlpool appliances, but this is my last ever.

On the 27th March 2012 I bought a new Whirlpool 6th Sense washing machine S/N 411048002028 AWOE 9210 - 30 9Kg for E499.00. I brought it home and plumbed it adding in a lime filter on the water line to protect it from limescale. On the 14th September 2016 a service technician replaced the entire drum as the old one made so much noise and the ball bearings are part of the drum. On the 7th June 2013 a technician replaced the drive belt claiming that it moved if a light load was put into the machine. On the same day I added an extension of 3 years Guarantee at Euro 89.00. On the 14th October 2013 a technician examined the machine for a water leak but found nothing and charged me for the call. Out E25.00. I lived with the noise of the spin cycle ever since. The noise got steadily worse until 27th September 2016 when the machine finally packed in. I stripped the machine down to find the ball bearings on the drum completely rusted over so the drum was rotating without the cushioning. On the same day I bought a Bosch machine and decided to forget about the extra guarantee as the offending parts had already been replaced once and did not even last 4 years. I will bring it to the recycling yard later today as that is all it is good for. It was bought in Media World, Orio Center, Bergamo. It was paid for by Gianni ** who is my father-in-law and had a loyalty card for the shop.

We bought a new Whirlpool gold gas stove. We had just finished redoing our complete kitchen, and thought it would be nice to replace appliances. I thought Whirlpool had a reputable name and good service record, but clearly, I should have checked. Three months after installing the stove, the handle pulled right off the door. We called the service tech who came in, took the door apart, and replaced the handle, but for some reason, installed different and incorrect screws for the door. Over the next 7 or 8 months, the handle pulled off twice more, and we repeated the cycle. At this point in time, we had been experiencing a situation where the stove would shut itself off. Bear in mind, it is less than 18 months old. Even now, the oven heats, and mid way through cooking anything, it decides to shut itself off. Clearly, there are issues with Whirlpool products, and when I called them, they want to do nothing about it. They jockey me around, from one service person to the next, frustrating me as I have to retell the issues to each new individual, and then they only tell me a replaced board, which would cost more than $600, is the way to go. Ive had this stove for 2 years, and it is seriously the biggest piece of garbage anyone ever put out on the market. Apparently there are no recalls on it, and so apparently, Whirlpool is more interested in ripping off their customers, than standing behind their product. I am currently seeking permission in a local paper to write a public service piece. I hope people will read it, and avoid this company at all costs. I hope whirlpool enjoys it. I dont know how they have turned a blind eye to all these complaints. As far as what I have read, with regards to other whirlpool problems, exploding glass, dangerous fumes, etc. They should be investigated, because what they are pulling off is criminal. If I want someone to steal from me, Ill leave my doors open, and let them come take me for what I have. I dont need to support a company that is stealing from me, while they wear smile on their face.

WTW4950XW2 - I purchased My whirlpool washing machine wtw4950xw2 from best buy in 03/30 2013 and it just stop working after 3 yrs. The manufacture warranty was only good for 1 year. I think companies does that on purpose because they know these new equipments are not going to last. I think before they use to have at least a 3 yr or better warranty on appliances. First it started making this loud sound when on the spin cycle, so I had a repair guy come out. He told me that the bearings needed replaced so (how does bearings goes out in 3 yrs). I asked how much will it be to replace parts/labor. The Parts cost $250 and the labor is $200. I might as well buy a new washing machine. I am so disgusted with this machine. My previous Whirlpool, which was not the new modernized, I had for at least 12 years and also I bought a whirlpool dryer. My Dryer stills works after 15 yrs. Im going to try to hold on to the dryer until the long haul. I wish I just would have gotten my old washing machine fixed. Now Im looking for a new washer and I wont be doing a whirlpool or anything with a push to start - just a plain old agitator, no sensing mechanism, just basic.

May 16 - July 25, 2014. Took almost nine weeks to get the replacement. Numerous service calls. Their tech said self-clean feature should never be used. In addition, I heard that the techs are only paid for one service call, no matter how many times they come. And, they cant fix this oven. It has to be replaced. Nightmare and very dangerous. Most American families cannot wait nine weeks for a new oven to be fixed/replaced.

Im very happy with my Whirlpool washer and dryer. The washer leaves the clothes clean and has a variety of wash cycles and water levels and is quiet. The dryer also has a variety of drying selections for all clothes and heavy loads and its very quiet.

We bought this fridge 1 year ago. We have already been without a fridge from Oct 2016 to Jan 30, 2017 due to a drawer going bad which caused the whole thing to quit. Now it has an obstruction in the Freon lines that causes it to freeze up and not cool. It was deemed not repairable by service company sent by Whirlpool/KitchenAid, and yet they want one more test run. The last person I spoke with at customer service had a flippant attitude and said there are no notes. What they do is drag you along for so long, make you wait and abuse you with tests, and hope you finally give up and go away. I will never buy another thing with Whirlpool/KitchenAid stamped on it!

This Whirlpool fits in a 1962 brick split level kitchen perfectly. It is both beautiful and runs as hoped. It has a bottom freezer, allowing the top portion to hold a full Thanksgiving and Christmas turkey platter. I love this Whirlpool. It is also made in America!

In 2013, my husband purchased a Whirlpool Hot Water Heater model #E2F40RD045V 40 gal. from Lowes in Vancouver, WA. On 12/12/15, had to call a plumber, the hot water heater was intermittent hot/cold. He flushed it, checked all power connections and changed the elements. On 3/18/16, NO hot water. Having a 6 year warranty, I called Whirlpool. They gave all kinds of excuses and told me to try a bunch of tests. By the time I got back to call them they were closed. I called them again on Monday 3/21/16 and said nothing worked and it had popped the breaker. They said change the elements. I told them I had just changed the elements 3 months before. I told them it was faulty wiring. They said the top element must be faulty. I gave up at that point and called the plumber. He came right out the next day. I had purchased a Rheem hot water heater to install and asked him to check the Whirlpool hot water heater elements he installed before he removed it. That is when it was discovered that under the insulation around the bottom element it was all scorched from FAULTY wiring. I called Whirlpool again and told them I could send them a picture and they said dont bother and immediately gave me an RA to return the hot water heater to Lowes. I told them I had already purchased another hot water heater and it was not a Whirlpool. I am going to request a refund.

I purchased a very expensive Cabrio top-loading washer thinking I would never have to worry because supposedly it’s the top of the line, right? Well, I have it a few years; the first week they replaced the basket because it was ruining my clothes. And then I had to replace the pump because of a coin getting caught and putting a hole in the pump. Really? What the heck? Now the basket is all shredded at the top. Obviously that isn’t right, so what do I do now? Replace the basket again? Who gives them the right to charge so much for a piece of junk? Plus, it’s supposed to save on water, but I feel that the clothes don’t really clean well. They hardly feel wet coming out of the machine.

Whirlpool Cabrio Platinum Washer - The seal on the top of the drum is breaking down. It is cracking at the bleach and soap dispenser. Somewhere in the washer drum or plate is causing holes and cuts in the clothes. The machine is only 2 years old.

Glad to know we are not alone in our disappointment with our Whirlpool French door refrigerator, but I am wondering what and when Whirlpool is going to do something about this. What a blow to their reputation. Goes to show things are not made as they used to be. We purchased our Whirlpool Gold French door (bottom freezer) in August of 2010. Here we are October 2012 and this is the third time it has stopped working. We have lost food, weekends waiting for repair people and cleaning up messes, and money. Same problem as others are reporting - the electronic board and controls. I just spent my Friday evening on the phone with Whirlpool, first explaining the problem to no result then waiting for a manager to call me back. Who (guess what?) never called. I finally called them and got the same script as the rest of you. It is outside the manufacturer warranty. Really, that is what you are giving me? Plus they will only look at it if we have a Whirlpool repair person come see it. When can they come? In 4 days! Ha, not likely. I am not giving this company another cent. We spent almost $2,000 on this fridge, all we are getting is 2, 3, 5 years? What a shame. We are fortunate enough to have had some space in our garage beer fridge for what I can save of the food. Our 7 years old, $300 Moffat fridge has been working like a charm. We will never again fall for the looks of a Whirlpool, let alone purchase another one of their appliances.

I bought all new Whirlpool appliances. In my opinion Whirlpool has the best product at the best price. I don't buy anything but Whirlpool. My new bottom freezer refrigerator has more room than my previous side by side. The bottom freezer is a great feature and works very well for me. The shelves are adjustable. There is plenty of room in the doors. It has a meat drawer and humidity control vegetable bins. I was worried I wouldn't have enough room for my food but I am happy to report there is plenty of room. The freezer has the pullout shelves and automatic ice maker. It has a great appearance and takes less room than my previous side by side. Overall, it is well worth the price and I am not sorry I bought this refrigerator in the least. It can't be beat.

I got the works; the stove, dishwasher and refrigerator. I cannot believe all the BS you got to do to baby these appliances. If I had designed this mess... I would not be selling it. Every one of the appliances has a issue... the oven takes a long time just to cook toast. I would send them all back... but from what I have been told this is it. They all suck! I sure wish I had my older appliances back. I see the city dump in their future! I got the black stainless. Believe me I am not happy at all. The repair people have already had to fix or replace parts and I have not had this stuff for 30 days yet.

We purchased this refrigerator towards the end of 2008. The entire interior of the refrigerator is imploding. The plastic Whirlpool used to frame the glass shelves is cracking and shards are falling off. There are 3 drawers; one has already fallen because the plastic sliders the drawer moves along has disintegrated. We noticed the small hairline cracks appearing some time ago but never thought they would go to this extreme. Apparently the plastic used cannot stand up to cold temperatures.I contacted Whirlpools chat and was told that the product is out of warranty and I need to place a service call to get new parts. I proceeded to email the CEO of Whirlpool, Mr. Fettig because I dont believe I should have to pay for a service call when its a manufacturing problem. I received a call the day after and was told the same thing; that they are sorry we are experiencing a problem but the warranty only covers the first year. I was told that if there was a problem with the plastic being inferior that they should have cracked in the first year. I responded that the cracks may have been occurring early on in the back of the refrigerator which is the coldest part but were noticeable.Its very frustrating because a refrigerator purchase is expensive and not something that I planned on doing a mere 5 years later. I believe that Whirlpool at the very least could have shown goodwill towards their customers and given at least some discount on the replacement parts or at the very least a certificate with an amount off toward the purchase of a new refrigerator. Its a win-win situation for everyone because the customer is still happy with their Whirlpool refrigerator and/or it guarantees repeat business for Whirlpool. Apparently Whirlpool doesnt care about keeping customers happy and want and/or need repeat business. Its the last Whirlpool I will ever purchase!!!

AVOID Whirlpool water heaters - Bought two 12 year warranty water heaters from Lowe’s in 2014. Model NU50T121-403 from Whirlpool. Thermocouple went out within the first 4 months. Called WP, they gave me a number to call for an authorized contractor to come out. Made certain to tell me that PARTS were covered, but not labor. $300 for the labor and two days later, hot water is back on. SAME THING happens again 6 months later, then AGAIN in Sept of this year. So 3 guys have been out to all replace the same part. This morning, hot water is out. Both tanks. Can’t keep pilot light lit. Called WP. They gave me more numbers of authorized contractors. No hot water and now I’ve got another $300 I owe to fix the SAME BROKEN PART. I wonder if this is how their last class action lawsuit got started?

We had the Whirlpool Cabrio Washer [WWT5640xw0] for approximately six months and it began to behave strangely, very much like the other complaints I have read on this site. It works poorly, does not clean the clothes, there is a smell that is coming from the machine and it makes loud, inappropriate noises. It stops spinning and washing in the middle of a cycle. Before I become aware of the issue, I would find loads of clothes sitting in the water and the machine indicated the cycle was completed.What a piece of junk! We cannot afford to go out and get another washer at this time and based on what everyone else is saying, the cost of repairs is very costly. I too called the company and was greeted with indifference. I too will not purchase another Whirlpool product and have spread the news to my friends about this worthless product and manufacturer! My message to this company: Whirlpool, the right thing to do is recall the machine and provide us with a voucher so we might go and purchase another machine from any manufacturer we wish. But we all know that will not happen as the company is clearly saying to its customer base, Our sales and profits are more important to us than you and your satisfaction!

I have a home that was new 5 years ago. My microwave/oven Whirlpool Gold was built in March 2005. The light bulb went out in the microwave 3 days ago. The users guide that comes with the unit says for this call assistance. I called the local appliance co. Cost to replace the bulb is $10 parts, $65 service call $25 labor thats $100 plus tax for a $.10 bulb! I called Whirlpool. What a joke, the biggest bunch of puppets paid by a Michigan based company who never heard of what happened in Detroit! They were no help and understood my frustration but flat did not give a **! For a $.10 part Whirlpool is willing to get bad press worth whatever I can amass!

I bought this Whirlpool Cabrio washer three and 1/2 years ago and the assembly which is basically the transmission and the assembly which is the agitator is out! Needs replaced! This is complete crap! The new parts will costs over $500 bucks plus labor! Ridiculous! My last washer which was a Maytag lasted me 20 years! What a piece of junk! Now I have to. It a new washer! No thanks to you Whirlpool! I will never buy another Whirlpool appliance again! Neither will my family or friends!

Purchased a self-cleaning Whirlpool oven - model number RBS245PRS06 at Home Depot. Spent extra for the self-cleaning feature. The oven had slight use and used maybe once a week. Cooked a big Thanksgiving meal and decided it was time to use the self-clean feature for the first time. One hour into the process the oven shuts off, no longer has power, and the oven door is locked and will not open. Called Whirlpool (talked to 2 levels of customer service), they wanted me to buy a $200+ warranty for another year of coverage!Researched online and talked to the parts people and this is a KNOWN defect. It happens frequently when using the self-clean feature. It requires replacing the Thermal Overload Safety Thermostat which costs $45 with shipping for the part. The service call is over $100 PLUS labor which can run even more. There are YouTube videos that show how to replace this fuse. The parts lady recommended NOT using the self-cleaning for this oven. Buyer beware. If you are in the market for a new oven do not consider this Whirlpool model. THIS PRODUCT IS DEFECTIVE AND WHIRLPOOL WILL NOT STAND BEHIND IT ONCE YOUR 12 MONTHS IS UP.

My Whirlpool side by side refrigerator which is not 7 years old has had more repairs than you can imagine. After paying over $1,500.00, I have had a repair service come out at least 5 times. Today, they say I need a new compressor at the tune of $850.00. This combined with my other repairs would add up to around $1,300.00. I am certainly not going to invest any more money in this refrigerator. I wouldnt recommend a Whirlpool Gold for anything. Dont know which brand I am going to purchase now as they certainly dont make anything like they use to. Totally disillusioned!!!

We get the error code F1 in the start of the cycle and when there is 21 minutes left, we have to stop and reset at least 7 times before the water fills. We put a new sensor in for over $200. The second problem is it goes off balance no matter what the load is. I was going to have it fixed (if possible). After reading all the above I wont waste any more money on it and go buy an old fashioned reliable washer. What a piece of money sucking machine especially when I dont have any extra money to waste down the drain. I wish I knew before. There are a lot of people this time of year I would have rather given the money for a needy cause. How disappointed we are with Whirlpool!

I have had my Whirlpool dishwasher for 8 years..I cant use the top rack anymore as it doesnt clean dishes!! I bought a brand new one for my cabin..I hope it works longer (right now it cleans amazing).

Purchased a new French door Whirlpool fridge May. It replaced a Whirlpool that was here when we purchased the home. Ten days after purchase the fridge went to 21 degrees and began freezing over food and drinks. Yesterday a tech replaced parts to repair the fridge. Today the fridge is once again at 21 degrees and freezing food and drinks. We live in a relatively rural area. Tech cant come back until six days from now. Very disappointed. Wish we considered another brand.

Our 3 1/2 year old dishwasher is falling apart. First the left slider broke on the top rack. We ordered a replacement part ($74) and when ready to install, discovered the right rack was also falling apart. At that same moment, the rollers fell off the bottom rack! It seems the plastic parts cannot tolerate the heat in this dishwasher (just a guess). We’ve returned the new replacement part and are shopping for a new dishwasher. It will not be anything from the Whirlpool line!

I am very disappointed in my purchase of Whirlpool High-Efficiency washer and dryer. It does not clean my clothes! I have white towels in my bathrooms, I have them for years. They have always come out perfectly white with the regular washer I had for years. Not any more! They now come out with yellow spots all over them. Dark clothes come out with a white residue on them that looks like there has been a napkin in the wash. I talked to Sears where I purchased it, they said I might be using too much detergent, so I have tried using less to no avail! I hate my washer!

This aqua clean is garbage. Had Whirlpool with heat clean perfect. Now have to clean my oven with self cleaning over easy off. I am so disappointed. I always thought of Whirlpool as a good choice. And have bought Whirlpool before. But not after this. Bad, real bad.

After proudly bringing home a new Whirlpool gas hot water heater NU40T61-403 day 2 no hot water. Wait 10 min and reset. This became a 3 times a week habit and now it will not relight. The repairman they sent out wanted us to rebuild our house to conform to code. Our old heater worked fine in this location. After talking to their tech, they sent us new parts overnight. Still cannot get this thing to light. All we want is hot water!!! Calls to the tech line end one way, it has to be your fault. I worked for The Gas Company!

I purchased my new washing machine in September 2011. When I removed the clothes from the washer after the first wash, I noticed that there was soap on several of the items. I ran them through another rinse and spin cycle, and there was still soap on several items. In an effort to avoid this problem, I no longer use the soap dispenser tray, and use the bulky cycle to get more water in the tub. Like most of the others, the clothes are tangled and stretched from one side of the tub to the other. Also, it takes 1 hour and 36 minutes to run a complete cycle. The manager of Sears tells me, that because of government regulations, that in a few years, you will not be able to buy any other type of washer. I purchased this machine, because it was highly recommended by Consumers Report magazine. I filed a complaint with them eight days ago, but have not had a response.

Was baking a pie when suddenly noticed the electric range had caught fire underneath the bottom of the oven. I could see partially through the slits inside that the heating element was on fire. Could not get to heating element as it covered. Shut the door and turned the oven off so the fire would die out. DO NOT BUY THIS PRODUCT. I was baking pecan pie. Whirlpool is no longer a quality brand. Washing machine bought at the same time has been repaired twice since owning. Also, Aqualift technology is a joke. It doesnt remove any messes burned during cooking. I wish Id stayed away from this complaint. Bought a stove, washer, and dryer. Dryer has been the only appliance we havent had a problem with. We saved over a year to ripped off by Whirlpool. I expected a washer and stove to last far longer than 3 years. Actually would be 3 yrs come December. So disappointed.

Whirlpool model N40T91 with FLAME LOCK - first failure was the controller valve only within 9 months of a new installation, replaced sort of free of charge, landlord had to pay ship charges. Days and days without hot water. About 6 months later, pilot failed to stay lit. Landlords maintenance man called Whirlpools Customer Service. They had him jump through hoops and finally told him to press a white reset button on the igniter. Okay, that worked. A few days later, pilot went out again, white button was reset, working again. Recently, and more frequent now, white igniter button keeps popping out, and we keep resetting it and relighting the heater, repeatedly, 4 times in one day.Maintenance man comes and calls Whirlpool Customer Service. They advise him to check this and check that. Everything seems to be in order. They say they will send out a qualified service person to diagnose a potential problem, a charge of $200.00. Maintenance man and landlord say, No thanks. Maintenance man goes to Lowes to buy a different brand model. Guess what? Envirotemp Hot Water Heaters have the same control device as the failing Whirlpool. He reboxed it and took it back and said, No thanks. Ill try to upload the images of the water heaters and controller you should stay away from purchasing. Meanwhile, maintenance man went to Menards and purchased a Richmond model, a well known, and reliable water heater manufacturer.

I have had a lot of washing machines in my life and trusted that Whirlpool would have good products. Well, with this top-loader, I couldnt be more wrong! I have never had a machine that just sloshes clothes around - at best - leaving them just as dirty! Our water bill has greatly increased on top of that - I AM SO VERY DISAPPOINTED! Unfortunately I cant return the bad merchandise since I bought at a Scratch and Dent store (just a dent on the outside does not interfere with performance...).

My son purchased a Whirlpool Cabrio washing machine about two years ago and now it doesnt work. It was an almost $1,000 machine. You would expect a higher quality product. I always bought Whirlpool products because they were so dependable so I recommended my son to go with Whirlpool. Big mistake, the panel lights up but when you press the power button, nothing happens. I do not recommend this machine to anyone. Im wondering if anyone else that has purchased this has had the same trouble.

I purchased a Whirlpool Microwave GMH6185XVQ1 on 7/2010 for kitchen remodel. It needed a magnetron repair just after one year warranty ran out. I called Whirlpool and they agreed to repair. Whirlpool sent me an offer for an extended contract. I purchased it. Since microwave was out of warranty at time of contract purchase, I was told there would be a 60-day waiting period. Microwave broke again on 3/2012. I waited until extended contract was in effect. I was told since microwave broke before contract was valid, I would have to pay out of pocket to repair, then contract would be valid after that. It appears (per internet research) these microwaves have bad magnetrons that need frequent repair. I wrote to BBB to complain.

I purchased a refrigerator from this company Model #WRF989DAM. It worked for only 14 months. I had service people come 4 times to try and fix it, called customer service and was suppose to get a replacement, paid $300.00 for a different model, been 49 days and still have no refrigerator in my home. Had to go out and buy my own replacement. I have called and sent emails with no response of when I would be getting the replacement.

I purchased a Whirlpool Duet washer from a local appliance store in May 2009. I also purchased a 60-month extended warranty covering the washer until May 2015. I was shocked when I tried to use the washer today (May 16, 2012) and it would not turn on. I called the repair facility the appliance store supplied as the warranty repair facility, only to be shocked again. I was told the appliance store suddenly went out of business and my ($130) extended warranty was no longer in effect and I would have to pay for repair out of my pocket. I then called Whirlpool knowing they would stand behind their faulty $740, 3-year old washer. They told me there was nothing they could do because the one year warranty they offered was over. I had a repair person look at the washer and he told me a control board had to be replaced and the repair would cost at least $550. I told him I was just going to buy a new washer. I had not been happy with the washer from day one and was very sorry I had purchased it. It did not wash the clothes very well. Also, I had a musty/moldy smell in my basement that would not go away no matter how much I cleaned. The repairman told me today that the smell is coming from the washer. I just cant believe I am out almost $1,000 and there is nothing I can do about it. After reading the many reviews on this website about Whirlpool appliances, I am sure they will not be in business much longer. They should be ashamed of themselves for what they are doing to consumers like myself especially in todays economy. Is there anything that can be done about this?