Whirlpool realized in 2002 that this was a defective part. In 2005, they recalled the product. I purchased the Hot Water Heater (Model # BFG1F4034T3NOV) in 2006. Being this product was recalled in 2005, why was it still being sold at Lowes and other stores? Why wasnt it pulled from the shelves? Why werent the parts replaced before being sold? The hot water heater stopped producing hot water. I contacted Whirlpool and they said the gas control valve had to be replaced; they gave me a part # and an authorization # and told me I could pick it up at Lowes. I asked about installation, because it is still under warranty. They said they dont service this. I picked up the part and tried to find a plumber to do the work and they said it was too small a job. I had to impose on friends to help me; one is a volunteer fireman. He came out and put on the new part and in doing so, another piece broke. We called Whirlpool and they said they had to replace the manifold door assembly. They overnighted the part. Again, I asked about them servicing this hot water heater and I told them I am a single parent and cant do this work. They said they dont service this item. I then had a handyman come out to try to fix it and he wasnt able to get it to work and now I smelled gas (it cost me $198). I had to call the gas company and they came and said there was a leak and turned it off and gave me a violation. I called the company I have an HVAC contract with and they added the hot water heater to that contract and it cost me $120 more for a year. They finally got it working, I was without hot water for a week. I do not recommend anyone buy products from this company. They are horrible to do business with and their service is awful (the service they dont offer).

So I have had the washer for a few years - bought it new or at least I thought. First came a clunking noise - fixed that. Next came the F1 code and installed a new pump $90 plus dollars. After installation, Im still getting F1 code and am now being told it is the ERC control board or water inlet valve either way a guessing game which in the end will have cost me over $400 to fix myself. I wish companies like this would stand behind their merchandise.

Purchased this Dishwasher on Feb. 28, 2015. In June 2016 about a 2 by 3 inch section of the enamel face on the door rusted and fell off above the air vent. After three hours of hold time between Lowes (with the extended warranty) and Whirlpool (their warranty department) it was determined that this was not covered by either warranty as it was beyond the date of the 1-year mfg warranty and was not covered by the extended warranty (it was only a cosmetic issue). As these calls took place over a matter of 2 days, it was interesting that between day 1 and day 2, Whirlpool had issued a statement that no rust repairs would be covered under any warranty repair - regardless, unless it affects the functionality of the dishwasher. In other words, they KNOW this is an issue with this model and are doing nothing to fix the problem. I must say that the folks at Lowes were most helpful; cannot say the same for the folks at Whirlpool. I do not think I will trust their products again.

Purchased a new Jenn-Air JCD2295KES in 2007 when we remodeled our Kitchen. Its been a decent fridge. When it quit a couple of weeks ago, I had the repairman come. He informed me that the HV circuit board was bad and sorry but they dont make them anymore. What, a 7yr. old fridge and thats it? I sort of expect things to have to be repaired or maintained but to have to throw it away because Whirlpool chose not to carry the parts any longer. I decided to scour the net and see if I could find this legendary board. Lot of places seemed to have carried it but could no longer get it from Whirlpool. I found a place that could supposedly repair them but after a few days, they called and said the microprocessor was not repairable.I contacted Whirlpool and they gave me a place that does obsolete parts and although helpful, I thought they were real opportunists and wanted to charge me considerably more for a reconditioned board that a new one would have cost if I could find one. I kept looking on the internet to no avail and when I called Whirlpool again I was getting pretty upset. Here I am with a 7-year old refrigerator and cant get parts for it, thats just not right. They were pleasant but basically their stand was sorry, theres nothing we can do. I told them that I bought a lot of appliances as I have quite a few rental properties. I cant throw an appliance away just because I cant get a part. It just doesnt make sense. I feel Whirlpool/Jenn-Air simply doesnt care. Im not interested in their excuses, I just want parts. I dont think it is unreasonable to expect to be able to obtain parts for at least a dozen years or maybe even a little more.I posed the question to them. Would you buy a $2000 refrigerator if you knew it would only run 7 years? The customer rep. said no she wouldnt. Well, Whirlpool, neither will I. I was unimpressed with their lackluster response and offer of a $300 rebate on a new fridge. I can find better deals than that on my own. I have purchased many appliance and always actually liked the Whirlpool line but Ill not buy any of them again. Shame on you Whirlpool for letting your customers down. Just because you can ignore me, doesnt mean you should. Im in business and I would go to the ends of the earth for a customer to make them happy. No wonder the Asian companies are kicking butt on the so-called American manufacturers. If your not going to get service you might as well go for the cheap price.On a final note, I did after two weeks of searching find a board hidden in a little appliance repair shop in Colorado. It should arrive here tomorrow and was priced $150 less than the reconditioned board that the gougers Whirlpool recommended. I believe it is the last board on the planet. Hopefully it will get my fridge another 7 years down the road and by then Whirlpool and its subsidiaries will have been sucked up by foreign companies and under a different label.

I bought 40 gallon gas water heater in June 2004 and had to have it worked on twice, costing more than I paid for it. I am replacing it now because pilot light will not stay on, and it is currently out of warranty, and I have no faith that simple repair will hold more than 1 year stint. Customer service was attentive but product itself failed to meet expectations.

Im glad to see that Im not the only one that is dissatisfied with Whirlpools products. Three weeks ago I found my basement to be flooded and you could tell that it was from the hot water heater that was installed in 2005. The plumber changed the release valve. I thought that was it. This past Wednesday I go down the basement and find another flood. The plumber said pilot was not lit. The explanation was wind could have come down the chimney and blew out the pilot. Pilot was relighted and within 12 hours there’s cold water again. I called the plumber again and said that the thermal coupling must have gone bad. I went to Lowe’s to get a replacement and found that Whirlpool is sending a free replacement but I would have to pay shipping. All well and good, but what do I do in the meantime for hot water? If Whirlpool made a mistake, why didnt they send the replacement parts to the businesses that sell their products? I guess that would be the simple solution; instead, they expect me to pay $30.00 for shipping and be without hot water. Well, let me tell you: Im tired of this hot water heater. Whirlpool can go out of business for all I care because they dont stand behind their products. Im going to buy myself a Rheem and Im sure Ill be a lot happier. Need a new hot water heater? Don’t get a Whirlpool!

Light bulb went out in the freezer. Come to find it is a led cluster with a circuit board only cost $30 to $100. Engineer should be fired. What is the reason to take simple bulb and custom bastardize into an expensive hybrid. Greed.

We bought a house almost 10 years ago and it included a Maytag washer and dryer. About 5 years ago, we decided to buy the Whirlpool front loaders. What a mistake as the washer shook every time it ran. After several warranty service calls and days of vacation waiting for the service, they finally said they couldnt do anything. During that time I had been in contact with Whirlpool and asked for them to take them back. Of course they wouldnt. I asked for a swap for top load washer and they would need to also replace the dryer to match: still no deal. It took a letter from a lawyer to make it happen. They also bought back the washer and dryer stands which covered the lawyers costs.So shortly after I received the Cabrio washer and matching dryer, the lid is very heavy which I believe the lid spring broke. I refused to call the service company as I did not want to go thru that crap again. I also know I can fix it myself easier and without all the drama. I keep waiting for another failure but so far all is acceptable. Whirlpool is not the same company as they were when I made my living doing warranty service for Whirlpool! 30 years ago they were the best in the industry.The Maytag pair was giving to our relative and they are still working flawlessly. Unfortunately Whirlpool now owns Maytag. This experience has cost Whirlpool replacing our kitchen appliances. As much as I want to buy American, I will go with Bosch or LG only.

My last fridge leaked all over the floor. Mice were living in it also roaches. My landlord didnt believe me though Ive shown him several times. He didnt want to spend the money. Luckily his wife came over and saw how bad it was so she got a new refrigerator for me and it has been a blessing ever since. It is just the right size for my apartment.

We built a new home at the beach to enjoy our retirement and the builder installed new Whirlpool appliances. As far as we are concerned this was the BIGGEST WASTE OF MONEY WE HAD. Our appliances were under warranty for 1 year as usual and after 14 months things began to break. The latest is the ice maker in the French door fridge. After finding the diagnostics test online I ran the test and determined that the whole ice maker needs replaced. This ridiculous since the fridge is only a little over a year old. We even upgraded the fridge to avoid any problems. After talking to the people in our neighborhood we have come to find out that most people here have had trouble with whirlpool appliances.. I am ready to send these to the junkyard and replace them with a reputable brand (LG) that we owned before and were very happy with.. I dont understand if there is all these problems with Whirlpool products why the technical team doesnt fix the problem... Get parts from the USA NOT CHINA!!! My neighbor just told me he had the repairman at his house 7 times to fix his fridge and finally got a new one. Just got tired of the hassle and expense....

My mom got me and my children a new fridge side-by-side ice maker. We were hoping that since it was new, we would have it for a while, but 1 year and 1 month later, it is not making ice and changes temp for no reason. My fridge will, most of the time, keep cold; but then, there are those days that it doesnt. No one touched the temp, and since its been more than a year, Im stuck. How wonderful to spend all that money for a year and one month! We dont have a working ice maker, and also, I cant keep food good. I cant afford to throw food away. And my mom and I cant afford to get another one.

I have used Kenmore products for about 50 years, so when it came time to replace my old washer I looked at Kenmore/Whirlpool. I upgraded to the top of the line. I had been warned by 2 service techs (2 different companies) that had tried to keep my old Kenmore alive that the new ones are not up to par compared to the old ones. The first very small load that I tried, was not even thoroughly wet when I took it out to put in the dryer. 1st service call, tech suggested that I put machine on extra water.That helped sort of. A few weeks later, wash is not getting clean. Called Whirlpool, they suggested getting the washer cleaner and clean the washer. Went out and bought a special cleaner, $10-12 and two cleanings later using the extra water and extra wash water I now was getting cleaner clothes. They said I would need to clean the washer every 2 to 4 weeks. I have continued to use washer but frequently have to rewash about 1 in every 5 to 10 loads as it doesnt always clean everything in the load. Called the Co., they sent service out, they said its OK!In Jan. We went out of town for 2 weeks. The washer had not been used for 4 days before we left. Came home to water all over the floor which are hardwood. Needless to say our hardwood is all warped! Service came out, ran the washer for about 15 min. and said it was fine, nothing wrong! Called Whirlpool again! Washer is now out of warranty. They said call a local service, out of their hands as it is out of warranty! Nothing more than they can do.I have used Kenmore/Whirlpool Appliances all my life and they have been wonderful. The new ones are garbage as far as I can tell. I have a Refer that is now 3-4 years old and I have had problems with that, a new dishwasher that is 2ish and have had service out on that one, now my brand new washer top of the line and it is so bad I am afraid to use it unless I am sitting right in front of it watching it! Further if you have the rinse cycle on the clothes come out so wrinkled that you need to get out your iron out and iron everything including sheets and linens. Lucky that I did not replace my old dryer! Do I recommend Whirlpool anymore? Not on your life. I wish I knew what to replace them with!

I bought the Whirlpool Duet front load washing machine. It was a piece of junk and I bought it 3 years ago. Sounds like a jet taking off during spin cycle and drain.Well, let me tell you, its terrible. It walks out of the space its in during spin all the time and the F Codes. Im done! Just replaced the pump and motor for the drain on the thing and unplugged it several times to reset it. Still is giving me F codes.Im done, I tell you! Done! This has been going on since we bought it!

I purchased a Whirlpool microwave in November 2011 from BestBuy.com. The microwaves handle is coming apart. Best Buy wont honor because I didnt purchase the Geek policy. One year warranty is still valid, but Whirlpool claims that a door handle falling apart is cosmetic. Serial number TR14430004, model number MH3205XVS-2.

I have owned two different Whirpool washers over the last several years, and they have both been a very big disappointment. More than that they have cost me money, time, and peace of mind. The Duet was my first experience with a Whirlpool appliance. It was a front load that I replaced the water pump on twice and constantly had to take the front bottom piece of the washer off to clean the trap on. It had been taken off so much that the machine actually just fell apart. It also had some type of mold or mildew problem where it made the clothes smell. It was a constant headache.I was stupid and allowed a salesperson from HHGregg to talk me into purchasing the Whirlpool Cabrio washer. Another huge mistake. Again, cost me time, money and peace of mind. I have owned the washer for a COUPLE OF MONTHS, and the clothes that I have washed smell so bad that I cannot use the washer anymore. I tried to call customer service, but it is impossible to get any help because the lines were so backed up, I have not had the time to sit and wait for an available person. Not to mention there is an extensive process of pushing lots of buttons before you are put on hold to presumably talk to a human being. I assume this is because so many people are having so many problems with their Whirlpool appliances. It is not surprising. I bought a new washer, a GE. It is awesome!When I have the patience and the time, I will try to call Whirlpool again and see if they are willing to do anything about the washer that at this point is just sitting in my garage taking up space. I spent around $600 on a washer I only got a few months of use out of. When we moved it to the garage, we could hear water swishing around, which explains the horrible smell of the clothes. Once I started having the issue, I went online to see if this was an easy fix, and it turned out that LOTS of other people are having the exact problem, to the point where people are trying to get a class action suit going. Do yourself a favor and avoid the hassle of dealing with this company. If you purchase a Whirlpool washer, I guarantee you will be sorry. Trust me, I was stupid enough to do it twice. Hope this helps someone avoid the headache these appliances have given me.I will never buy Whirlpool again. And by the way, Maytag is made by as well as the following: Admiral (Canada), Chambers, Coovert (acs), Crosley (newer fridges, a/c, washers), Danby (8, Estate, Inglis, Ikea, Kenmore (see Sears), KitchenAid (4), Kirkland, Maytag Epic®, Roper, Speed Queen (Canada only), Sub Zero (undercounter ice makers), Whirlpool.

We just purchased this Whirlpool Washer. It is so awesome. Has all the many features I was looking for & we purchased it on sale. But really since using my washer I would buy it again even if it wasnt on sale. I love it. I have never been disappointed with Whirlpool. Everything I own in appliances is Whirlpool.

I love my Whirlpool refrigerator, its great. I have not had any major issues with this brand. I only wish that the freezer was made a little different. Im not a big fan of the side-by-side doors. I would much rather have the one with the freezer at the bottom and the fridge at the top...

I purchased a Whirlpool oven 14 months ago. I just paid it off 2 months ago. The oven stopped heating. I talked to Whirlpool... and basically because I did not purchase the extented warranty I am SOL. I will never buy a product from them again. Complete junk.

The exhaust fan for the gas range runs when using the microwave. The noise is loud and very aggravating and there is no way to turn it off. From what I can find the older models there was an option to turn it off. On the new models Whirlpool cut costs by not putting a small (QUIET) fan in the microwave but used the range fan for a dual purpose.

Whirlpool is a very good company and their products work very efficiently! If I had a choice to choose in a different type of washing machine I don’t think I could choose. Whirlpool is very reliable. Their older machines as well as their newer machines! They last pretty long. The dryer is dry very well as well as the washing machines agitate your clothes to get them clean.

On August 16, 2016 I received delivery of an Whirlpool under counter refrigerator that I ordered online from Home Depot. Model # WUR50X24EM. Five months later, on January 10, 2017, it stopped working, I called Whirlpool for repair. They referred me to their service company, I called the service company the same day. They had a repairman out on the following Tuesday, 1/17/17. The repairman said that he will need to contact Whirlpool to order a part. Whirlpool sent him the wrong part. After numerous phone calls no one from Whirlpool could figure out the correct part number. The repairman kept sending over pictures and information on the correct part, but this all went nowhere with Whirlpool.On 2/7/17, I called and started yelling. I had been very patient up to this point. I was finally offered by Whirlpool a parts research to determine exactly which part was needed. Plus a $50 Visa card to appease me. At this point, its been four weeks without a refrigerator and no one from Whirlpool has put any effort towards trying to figure out the correct part. On 2/16/17, I called Whirlpool again to find out if they had found the correct part. They told me that the new part had been sent to the service company and Whirlpool scheduled me an appointment right then for Monday, 2/20/17.So today is 2/20/17, the repairman came and went, Whirlpool once again failed, they lied because the repairman came out with the wrong part that was originally sent to him when he ordered the part back on 1/17/17. I called Whirlpool and asked for a manager. They connected me with the Resolution Specialist. I told her everything and pointed out that it has been six weeks without a refrigerator. She said she will take care of it and get the right part ordered. I asked her how long I should have to wait, cause at this point I have waited long enough. She said she will have an answer by the end of this week. I dont believe her, I feel as though Whirlpool is pacifying me. I dont understand why they cant order the correct part.I have no faith in Whirlpool that they will do the right thing or have any understanding on how inconvenienced they have made me. I have no faith to the point that I ordered another refrigerator from a different manufacturer. It will be here tomorrow between 8am-12pm. Oh, and Home Depot, they washed their hands of this a long time ago. And, I have yet to see the $50 Visa Card.

I had my range installed in January of 2015. The very first week, using a new Farberware non-stick skillet, the cooking surface became permanently scratched. Could not polish it out, and polishing - it must be done every time you cook on it! In early September the cooling fan for the electrical panel went out. Also, the convection oven would not maintain heat. Had the cooling fan replaced last week. Its out again, along with the convection oven not maintaining a regulated temperature. Also, 3 months ago, my grandson put a ceramic casserole on the stove top. After he took it out of the oven, it permanently scratched the paint off the control panel. Im very disappointed in the fragility (painted plastic surrounds top of control panel) and unreliability of this product, a total lemon.

Bought a new oven for my new kitchen. Two weeks after install, I had to have it repaired. Less than 6 mos. later, it is being repaired again, for the same problem. Whirlpools policy is to fix it till the warranty runs out, then not their problem. Buyer beware, and if you do buy, make sure you get the extended warranty.

I can add my experience with the many others I have read about. My Whirlpool Cabrio washer top lid glass broke in the up right corner after only 2 months use. Like many other reports, this is not due to something falling onto the lid. It happens without warning and without operator interaction. This is a defective design!

I purchased the four-door Whirlpool stainless steel refrigerator. It was installed on the 15th of June. One month later, the ice was not coming through the dispenser and if it did, it was a small amount. During this time, I was receiving notices from them about purchasing an extended warranty. Today, August 23, 2012, the ice maker stopped working completely. I was disgusted. Paying for the top-of-the-line refrigerator that doesnt last for 90 days is ridiculous. Also, the handle on the vegetable keeps coming off. That will be the last Whirlpool appliance I will buy.

I thought with the big tub I would be able to wash my king size bedding and other large things. Theres barely enough water to wash a small regular wash. Since it has no water it does not clean my clothes. Why the big tub if you cant use but one fourth of it?

I purchased a new home in 2005 and equipped the kitchen with Whirlpool appliances. Every single appliance has broken at least once. The refrigerator ice-maker has been repaired once and replaced twice. Some of the control panel buttons on the dishwasher work some of the time. Other times we have to strike the panel to make them work. Weve had to replace the handle on the microwave door twice at nearly $50 a pop. And the motherboard on the dual-oven has been replaced once. I will NEVER purchase another Whirlpool appliance for as long as I live.

After almost 10 years, my Whirlpool top loader is now malfunctioning just like a lot of complaints here. It will not complete a wash because it keeps giving an off balance error at the spin cycle. I also had a coin get stuck in the discharge hose but fortunately it did not destroy the pump. I certainly dont want to sink any money into a repair especially because the techs dont seem to know how to fix the off balance problem. Im not much satisfied with my Whirlpool dryer either. It takes forever to dry a load.

I like my machine even though there is no agitator. It is a top loader so it does not smell. It is a water saver which, when I first got it, I thought that it could never clean the clothes in that small amt of water...but it does clean the clothes very well.

The Weatherization program installed a whirlpool refrigerator in our home in October 2012. The fridge is less than 2 years old and the blower fan went out. We lost most of our food (what wouldnt keep in a cooler) and my daughters insulin spoiled. When they put this fridge in, they took our old one saying it was less efficient. Now we are stuck with a fridge that doesnt work and is out of warranty at less than 2 years old. We have left several messages for a Whirlpool representative to call us back and here we are, one week later, and no call back.This is frustrating because although the fridge we had may not have been as energy efficient, I am almost certain that it would still be working. I have never heard of a fridge that lasts less than 2 years. Also, we know that the blower fan must be a common problem because they are back-ordered approx. one month. We checked online, and called local businesses and not one place has the part available.I think we at least deserve a call back considering how stressful this has been on us. I had just spent all of my grocery money for the month, and 70% of it went bad and had to be thrown away. Money is tight for us and replacing spoiled food is not an option. Also, the insurance company denied our request to refill my daughters insulin a little early. Without proper refrigeration the insulin goes bad. The insurance doesnt replace lost or spoiled medication. Guess we get to pay for that too! Thanks so much Whirlpool! Ill be sure and highly recommend your products to my friends. (NOT GONNA HAPPEN.)

I purchased a Whirlpool 50 gallon gas hot water heater 3 years ago. I have 3 daughters all in school age. When my old one finally quit due to tank failure and out of warranty, I went to Lowes and bought a 6 year warranty hot water heater costing around $600. Now I figured you get what you pay for RIGHT! WRONG! So about 2 years ago the pilot light started to just go out on occasion, a bit of an inconvenience but there was no default code warning me of any other issues. So typically we just relight it. I called Whirlpool to get help with this issue, but they wanted me to pay for a technician to diagnose the problem. Um isnt that what the warranty is for? I said dont bother. Im not paying $150 for someone to tell me what I already know. Ill just keep relighting it myself. So finally the pilot light goes out for the 100th time but this time I go to reignite it and BOOM! It sounded like a twelve gauge shot gun going off in my face! Then it flutters flames into the chimney of the hot water heater. Scared the crap out of me at first. But it finally stopped and run fine. Well Im laying in bed a few nights later and woke up to a loud thumping noise, I go down stairs and it stops. The following day Im in the kitchen and THUMP THUMP THUMP BURP BURP BURP. Run over to the hot water heater closet and theres the flames shooting out of the gas valve into the hot water heater then BOOM! Its out! The valve unit finally took a crap I guess. I call Whirlpool again to get my warranty - this time it definitely needs to be replaced. So the guy tells me the parts are covered in the warranty but a technician needs to look at it first and the technician Ill have to pay.. Excuse me but what the ** did you just say? I have to pay for a technician to look at your failing part? No I dont think so! Just send me the part - Ill replace it myself. Im a millwright electrician by trade. I specialize in power plants and refineries. Im sure this little gas valve wont be a problem. I spoke with these idiots on a Friday and he said I could have it ground shipped for free and it should be here in 5-6 days or pay extra for quicker delivery. What the hell did he just say? I could pay extra for quicker delivery on Whirlpools faulty part? ** whirlpool should be saying Well have the part overnight to you.Now since it was a 3 day weekend theres no sense in me paying $40 to have it delivered 3 day because it still wouldnt arrive until close to the five day. So I just looked to see where my damn part is because it shouldve been here by now according to the guy on the phone. NOPE! Its set to be delivered in 5 more ** days. DONT BUY A WHIRLPOOL PRODUCT. THEY DO NOT PRACTICE ETHICS.

I purchased a 29 cu ft Whirlpool French Door refrigerator (WRF990SLAM) Feb, of 2013 from Lowes and have had nothing but problems since I purchased it. First, I noticed that the fridge sounded louder than normal. Then a few months later, ice started building up in back of the fridge. Then the most craziest thing ever started happening, the water dispenser started randomly shooting out water. Lastly, the ice maker takes forever to make ice. Still to this day, Whirlpool has yet to fix the problem. Funny that the technician said that theyve received a lot of complaints regarding the same issue for this model...so, I say you should be able to fix it then or replace my fridge. I have a 2yr extended warranty which states if they cannot fix my fridge after 3 attempts then they have to replace it. They refuse to honor that. Whirlpool and Lowes are full of crap!!! Whirlpool doesnt care at all that their products are crappy and their service is bad. They sent me a survey asking how do I like my product and I informed them of my issues and they sent me a response to purchase an extended warranty. Now, if they really reviewed the surveys, they would see that I have an extended warranty for 2yrs but regardless of that what about the issues Im having with my fridge? Do you not see my comments? If you didnt care you shouldnt even bother asking. Lowes pretended to care and made me believe they were going to replace my fridge but then sided with Whirlpool and said that they have to make 3 unsuccessful attempts to fix the fridge but each attempt has to be 30 days apart. Thats a bunch of crap because its been 6 months and my fridge still has not been fixed or replaced!! I have a Samsung side by side that I bought a year before Whirlpool and never had a problem with it. I bought it from Home Depot also, along with a stove microwave and dishwasher. I will be sticking with Samsung and Home Depot from now on!

Whirlpool Cabrio 8kg washing machine - Purchased this washing machine because of the size, water efficiency, no agitator. Have purchased Whirlpool products before and havent had a problem but this washing machine is absolutely a piece of garbage. At first our water bill was hugely excessive so tested the machine and it was using 269 litres per wash when it was only supposed to use 98 litre as stated on the machine. When doing 2 washes a day you can imagine the water bill we had. Lint on washing, continually out of balance no matter how much was in the wash. Had it fixed under warranty then just out of warranty. Water wouldnt turn off. Had to turn it on and off at the top lid. Could now be opened during washing cycle. Started turning itself on in the middle of the night and day. Had to unplug it to stop it, wont spin out clothes. Still sodden. After cycle finished with the lid open it would start to fill up with water again and going out of balance again. Had the appliance people out for the 4th time. Had to have the motherboard and a valve replaced. Its still leaving lint. Washing is not even getting wet so it cant possibly be cleaned. Contacted warranty people. They came out and said it is running as it should be but they advised us this is a common problem with this brand of washing machine. Personally I wish I could throw it away if I had another $900 to waste on another machine.

This is our second Cabrio w10550273a. The first one was just as bad as this one. It was replaced under an extended warranty we bought. This washer just like the last one constantly gives a UL code. Thought the washer and load are level.

We purchased this Whirlpool Cabrio washing machine from Sears about four, maybe five years ago and have complained repeatedly. We have had repairmen out numerous times. Of course, they have had to order parts. My clothes are not getting clean and they now have an odor to them. The machine is getting noisier and noisier and it is rocking like crazy (I had to put plyboard underneath to protect the floor) during the rinse cycle. The water sprays out erratically and sprays even slower for cold water, then warm water, which was weird! Thankfully, I still have it under warranty (I got the extended warranty). I am now getting ready to call them again. I will never buy this brand again.

I purchased a Whirlpool Cabrio Washer WTW6200 & this yr purchased a newer dryer w/ steam capability. I wish I would have waited a couple months for a new washer that yr and purchased the one with no agitator inside! But my washer died that day & I needed one & NO ONE informed us of the changes or problems of this agitator at the time of purchase. I have had this service several times my first year and the agitator replaced I believe twice. But it still destroys clothing. I called 1 month out of warranty and even though they had been out several times the first year for the same issue, they would not help me! Yep, even after the 1st year they said to get things done I had to purchase an extended warranty even though this was a mfr issue no doubt! So, 3-4 years later I still am dealing with the very same issue over and over with NO RESOLUTION in site and $900 in the hole for this washer and I am losing money with clothing damage weekly!Even today I had two pair of jeans, $98 ea rec these terrible uniformed marks all across the legs making them unwearable! At least for where they were intended to wear them at. They are now yard jeans...yep $98 expensive yard jeans now!!! These were my good jeans which I cant afford to buy more nor replace them so I have to do without. We cant wash anything with strings such as hoodies, shirts or baby clothing with spaghetti straps or little dangle things; we have to use the laundry mat and come home & dry w/ my Cabrio steam dryer which I love. Most everything I have to use zipper net bags but even then things still can get destroyed, especially if a hole gets torn in the bag from the wings of the agitator as you will see in the below photograph. I currently have & own an expensive washer I purchased from HHGregg by Whirlpool replacing a previous whirlpool I owned for 22 years! Yep, Im wishing I had it back & put the $200 some needed to repair it! Please Whirlpool will you please do something & make this right once and for all. I dont have $900 for another washer. I just want to be able to use my washer without it destroying everything I own. I have darn photos of what this is doing and you wouldnt believe it. It took us an hour, yes an hour to untangle a top that became entangled in the flaps on the agitator. This is the worst design I have ever seen and needs to be recalled once and for all and either fixed or replaced with new machines of equal model with the agitation issues resolved or removed & with no issues or further costs to your customers! Why would you honestly believe that an agitator with wings coming off the bottom that are not attached to the bottom would serve some type of positive purpose in cleaning clothing? All it is doing is tearing them to shreds, tangling them up, doing things to hoodies which make them unrecognizable after ripping the cords so hard out of the hoodies that Ive seen them shred the material across the collar area and opening of the cording completely ruining hoodies ranging from $35-$75 a piece even after placing them in mesh bags! Why did we keep placing hoodies in the machine? Well with 4 children at times they just dont listen or get all the info as to what is going on with the machine as 3 were college kids coming home periodically & yes, to do their laundry. Look, lets talk straight. You as a company from what I have learned from appliance salesmen locally and regionally, you knew this was wrong and knew this was your last ditch effort of an agitator before you knowingly knew you were going to an agitator-less unit on your washing machines & already had one ready to go out on the floors. I know that you Whirlpool CEOs knew this unit was a bad call but chose to ignore it. You had to know it because there was no way this could have passed quality control. It had to have failed sometime in its trials showing you the issues of the wings. Unless you never did any quality control on this unit and just rushed it through? Please to the CEOs of Whirlpool, I am asking you to make this right if not for good standing of your company do it at least for families like myself who cant afford to buy another machine and are now stuck with NEW machines yet going to Laundry mats. This was to be my last washing machine I would buy hopefully. I am 54 and was not planning on buying another. How do you think this makes your company look???? Im just so tired of dealing w/ Whirlpool to only hear I have to purchase a $400 extended warranty with no guarantee that they will fix the issue. If an attorney wants to step in & believes they can help us and maybe others then Yes please help us because this is absolutely ridiculous and is a product that needs to be recalled. We are out so much money now and like I said we are to the point we cant purchase another washer. We had to purchase all new appliances as they all began going bad around the same time.

I have had my washer & dryer about 12 yrs. It has given me great service; however the spin mechanism on the washer stopped one month ago. It was replaced thru my home appliance warranty. I need the front loader style because Im disabled now, and cant take clothes out of washer. My previous set was Kenmore & it lasted 20 years. Looking to purchase in 2 months.

We relied on consumer reports as the primary source for a recommendation on this washer. Just under two years old, it started making a noise, which suddenly went away. Then one day the machine would not spin and drain, and we could not decipher the error code into anything useful. I turned the machine over to find that the drive belt was half-on/half off the pulley on the drive motor. This caused the belt to ride against the belt guard and wear right through it. I removed the belt and determined that the cause of the problem was that the large pulley on the drum was loose. For some reason the nut which holds that pulley on was slightly loose, causing the pulley to wobble. Not sure why they didnt use some Loctite on that nut. I put everything back together and tightened the nut. No problems and I checked it a month later, everything was still good. Fast forward to last week, when the machine was not yet 3 years old. Same thing, washer would not spin and drain. Tipped machine over to find that the belt had fallen off, the drum pulley was again loose. But this time the belt had damaged the pulley on the motor. I figured, no problem, just order a new pulley. Well you can buy just the pulley on the drum, but the pulley on the motor is part of the motor, it cannot be ordered by itself. The cheapest I could find the motor online was $250. We decided to cut our losses and buy a new machine. We will NEVER buy another Whirlpool appliance (or anyone elses by the same manufacturer, i.e. Maytag). Our last Kenmore washer lasted 23 years. Oh but it had an agitator and wasnt listed as HE (High Efficiency), so I suppose the environmentalists would get the dry heaves thinking about the impact of that washer on the environment. But it was useful for 23 years. Now this High Efficiency Whirlpool is headed for the recycling pile. Sorry, I think this hurts the environment more than an appliance which just works year after year. Yep, they took a design that worked and now we have energy/water efficient washers that dont last very long and are so expensive to repair that the solution is to just buy a new one.

3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

This Cabrio washing machine is really frustrating....... It goes off balance all the time. It does not matter if you have a full load or partial load, I know it has a tendency to go off balance, so I try to put the clothes in evenly. BUT it doesnt matter, it goes off balance. When the washer is downstairs, it gets to be a pain. The lid lock is a pain also. If you forget to put something in the machine, you hit pause button then you have to wait forever until it unlocks, and wait forever to unlock when it goes off balance. When it doesnt go off balance, it washes everything just fine. But if I knew what I know now about it, I would have never bought it....... I would recommend a different washer and check the reviews, which I didnt do. :(

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

I have had my Whirlpool W10280546B HE washer for 1 1/2 years. For the last year, I have had constant problems with the washer leaving a large amount of residue (in spots) all over my laundry. I have always run my washer as instructed, and I only used HE detergent in the correct amount. This residue appears to be fine lint, but may be lint combined with detergent.I have used the washing machine cleaning tablets and powders, but this has not helped at all. No one seems to have ever heard of this problem. I have to clean off these spots which cover approximately 1/3 of each article with every washing. The dryer helps get some of it off, but not nearly all of it. Any suggestions besides buying another washer of another brand after only 1 1/2 years?!

My brand new Whirlpool washing machine has been nothing but trouble from the day we first used it. We are now reaching out to try to contact the warranty department. Weve tried email and phone both and are having ZERO luck even getting a human to talk to about the problems. No response. Took forever to even find what we thought was accurate contact info. Lowes doesnt stand behind it. Now Whirlpool has a crap warranty department. We were warned and should have never bought it to start with. It is a total waste of money.

I bought this fridge 2 years ago. I had multiple repairs already. Now the side panel makes noise when you shut the door. Repairman told me it is the foam separating from the side panel. There is nothing that can be done. I also have extended warranty.

I bought a Cabrio from Costo less than 2 years ago. Dryer so far so good (big barrel with hair dryer so what could go wrong?). Washing machine is HORRIBLE. Lid latch broke (couple hundred to repair). Now out of the blue I get an F2 error & machine is completely inoperable. I am only user & very careful with it. There should be a recall on this expensive junk. NEVER buy Cabrio or maybe any Whirlpool appliances again. Ive never written a bad review btw.

Purchased a Cabrio large capacity washer. It NEVER seemed to get the clothes clean enough, and after the sensors and bearings went bad within three years (out of warranty of course) I gladly kicked it to the curb. I bought a Samsung that has been great. Id like to support USA made, but not when it is AWFUL.

Purchased Whirlpool refrigerator at Lowe’s. Refrigerator would never get cold enough, so I exchanged with a Whirlpool Gold side-by-side refrigerator. After installation coffee was spilled behind refrigerator. I was unable to pull refrigerator out from wall to clean coffee spill from behind. When checking with Lowe’s on the 35th day, I was informed that Lowe’s 30 days warranty had expired and I would have to work directly with Whirlpool.I discovered it was very hard to communicate with Whirlpool; there was a problem that they only had on file the first refrigerator I purchased not the one I kept. The Whirlpool service rep did not seem very cooperative but with insistence they told me they would change my information to the correct model and serial number and a repair order was sent to a local service shop. The problem with not being able to roll the refrigerator out from the wall is that Whirlpool had changed their wheels to a tri-wheel support and there was not enough height on the single front wheel to lift the refrigerator to clear the screw down leveling stops on each corner. The service rep had no solution for the problem and had to call the Whirlpool service. He indicated he never was able to get assistance from that department. I told him I would talk to them as the consumer but they refused to discuss the matter with me, so I gave the phone back to the service tech. Whirlpool told the service tech to order replacement wheels of which I knew this would not resolve the problem.After two weeks, the replacement wheels arrived, the service tech installed them and as I expected they did not resolve the problem. I then requested the service tech to remove the rubber from the stops on the corner to allow for the additional required clearance and this solution worked. This is a very poor design for Whirlpool, but I accepted the results. Two weeks later I receive a phone call from the service business and they tell me that Whirlpool did not have the refrigerator model/serial number they worked on. Whirlpool was not willing to resolve the problem I had with them initially and the service business would have to bill me directly and was not covered under the warranty.At this point I lost it and informed the service business I resolved this model/serial number with Whirlpool before. Whirlpool gave them the authorization to work on the refrigerator and they would need to collect the fees from Whirlpool. I have purchased my last Whirlpool appliance mostly because Whirlpool makes it very difficult or refuses to talk to the consumer and it appears the quality is no longer there. Will Whirlpool become the next Kodak? With this kind of service, people will just quit buying from them.

I bought a Whirlpool top loading washing machine with dryer on top, model # WGT4027EWo, last August, not even 3 months old and noticed the lint was not coming off the clothes. We tried cleaning out the washing machine with vinegar, wiping down the sides, using smaller loads and even used the gentle cycle. Nothing helped. We have had 2 different repair men out and they said there is nothing wrong with the washing machine and to put the clothes in the dryer and use fabric softener. I have never had to use fabric softener in my washing machine to get my clothes clean. When reaching out to customer service, I have spent over 2 hours and no satisfaction. They state that the technicians say there is nothing wrong with the machine. I was told by both of the technicians that they removed the lint trap from this machine, but no one is taking responsibility. My whites have blue lint and my darks have white lint, so too strong an agitation, as suggested by one repairmen is completely wrong! What to do when you spend over $1,000 on a washer/dryer combo and they dont work correctly and Whirlpool doesnt stand behind their product? Honestly, I will never buy another product from this company, and I 60 y/o and never made a complaint before about a appliance in my life!!! I dont even think I can give them 1 star! DO NOT BUY WHIRLPOOL - CUSTOMER SERVICE IS HORRIBLE!!!

If I could give Whirlpool products and their customer service zero stars, I would! We built our beautiful home that was complete in June 2015. Our builder was installing Whirlpool products in the homes he was building at the time. So we decided to accept the microwave, dishwasher and drop in gas range that he offered. We had never had Whirlpool kitchen appliances and no reason to respectfully decline the brand. We bought a french door Whirlpool refrigerator as well so the handles would match our open concept kitchen.In addition to the poor quality overall, the microwave makes a terrible buzzing noise that has been fixed two times thus far. The refrigerator is so loud at times that its difficult to hear the television when sitting in the living room. The dishwasher does not dry the dishes on any setting to include heat dry hours and hours after the cycle is complete. This forces us to hand dry our dishes prior to putting them in the cupboard. The cast-iron grates on the drop in range already look terrible because the enamel is coming off. I clean all the appliances as recommended by Whirlpool and like to keep our home beautiful because it is our place of solace and comfort. As stated prior, our kitchen and living room are open concept so I now have to contend with an eyesore in the middle of our homes hub because Whirlpool considers this manufacturing flaw as cosmetic and wont cover it under warranty.To add insult to injury, these poor quality products are the higher end available from Whirlpool. We plan to wait for the year end warranty to expire and replace the four appliances with a brand that has always offered excellent customer service and has been very reliable and trustworthy for us. As a consumer, I would save yourselves the agony of purchasing any Whirlpool appliances!!!

Contacted Whirlpool - unit (Cabrio washer 7600xt) is out of 12-mo warranty. Spoke with manager, Tracy **. She said they would not help - out of warranty. Called local parts/service center - ea. hinge is $42 plus shipping and labor to install. Obviously this is a defective design. The lid is too heavy. I was having a difficult time deciding to spend 150-200 dollars every 2-3 years for hinges on a $700 washer and then I read all the other complaints about Whirlpool washers. I will sell it for scrap and buy a better brand.

Dishwasher is 15 years old and still going strong. Minor leak which disappeared when I cleaned the gasket. Good internal arrangement for fitting dishes & silverware. One of the best appliances I ever got!

I love a refrigerator that keeps my milk and water ice cold and keeps my fruits and veggies crispy and fresh without freezing them.

I have a Whirlpool fridge model G165ARXXF05 for over 3 years. This is the second time I have had to replace the motor on the ice maker. In calling Whirlpool for help in the matter I only got a decline from them... I would never buy a Whirlpool product again.

I purchased a Whirlpool Refrigerator from Lowes. 21 months later I need to replace the compressor. Whirlpool has been kind enough to cover parts and labor, but it has been 24 days and no service call yet. After multiple calls to their service department, who keep telling me there is not another dealer in my area, I am forced to wait. Living out of coolers for the past 21 days is very frustrating. I wanted to rent a fridge and send them the bill, but they would not cover that. I will never purchase another Whirlpool product in my life and will advise family and friends on the reliability and service I have received.

I have raised complaint regarding my refrigerator and changed compressor and they given me 1 year warranty but after 3 days again compressor gone and they have came and replaced that and taken service charge. Again after one month compressor giving problem and freeze is not getting defrost.. Again I called to customer care but again they want Visiting charge.. Really pathetic Service I ever seen. And customer care people does not know how to handle client and repeating same line. Dont buy anything from Whirlpool.. its worst service provider.

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

To be fair to Whirlpool, I have contacted them but have not given them time to respond. I feel so strongly about this issue that I want to get the message about this company product out. About 2 years ago, we purchased a Whirlpool fridge, stove, and dishwasher. I have had so many problems with the stove (WFG540H0AS0) that it has pissed me off, actually. First, the knobs that control the stove top melted. MELTED! We had to replace them to the tune of $30.00 each and there are 5. Why would anyone use knobs that cannot withstand heat on a stove?! News flash, I cook on my stove. Therefore, there will be heat used. Second, the oven keeps shutting off in the middle of cooking my holiday meal. Of course, this made my turkey take much longer than usual. Today, it shut off in the middle of cupcakes. Third, the oven does ignite without turning it on and off multiple times. So we called the repair person who told us to replace the ignition switch for it. This helped for about one month. Then the problem started again. I just emailed Whirlpool and I will call them next business day. I am so disappointed with Whirlpool. I thought they had a good reputation for quality products.

Bought in 2009 brand new set washer and dryer together at Best Buy. The washing machine in 2011 started its never ending problems. I’ve paid for parts & labor for the door lock sensor mechanism multiple times where I learned to repair that myself even buying parts and installing on my own last time... Then a drain pump went bad. Replaced that. Now a code f51 sensor to a motor rotor not spinning issue. Horrible. All the money and time in this unreliable machine is so awful. This thing also isn’t that great when it works too. Goes unlevel way too much having to redistribute and restart cycles all the time... Wish it washed better for the price and all the trouble. It is the worst machine. Has to be! Everyone I know can’t believe the fight I’ve had through the years with this machine. The company doesnt help you. Costly headache Junk machine!

I purchased a Whirlpool dishwasher from Home Depot on 2/5/2015. It was delivered damaged on 2/9/2015. Home Depot refused to take it back and Whirlpool sent a tech out to see the damage. I told them I did not want a refurbished dishwasher that I paid almost $1000 for. Whirlpool advised Home Depot that the machine can be repaired. Once again I told both whirlpool and Home Depot that I did not want this dishwasher and to pick it up. Home Depot stated that there would be a 15 percent restocking fee along with a $65 to pick up the washer. Why should we have to pay anything? I am so disgusted for the treatment I received.

We purchased a Whirlpool upright frost-less freezer (model # EVL201NXRQ05) in October of 2008. So, you see, it is not even four years old. A few months ago I noticed that some things in the freezer were very soft. I looked at the back of the freezer and there was some ice buildup around the area where the coils are located. I took everything out of the freezer and removed the panel over the coils. There was major ice buildup on the coils. I completely defrosted it and dried it out. I restarted it and it seemed to be working okay. But a few days ago, when I got something from the top shelf of the freezer, it was not even frozen. So, here I go again. I removed everything from the freezer and have defrosted it again. However, this time, as soon as I turned it back on, the ice started building up on the coils immediately. It is impossible to contact anyone at Whirlpool that gives a crap. We have also been having problems with our Whirlpool Gold refrigerator. We have spent over $250 on it and it still is not working properly. I would love to just throw them in a ravine, but we have spent a lot of money on these appliances. We thought that Whirlpool was supposed to be number one in appliances. What a huge mistake we have made and it is costing us dearly.

I like the Kenmore dishwasher as it has the cutlery basket in the door. This leaves more room for dishes on the rack instead of taking room up for the cutlery.

This refrigerator (Model #wrf560seymoo, Serial # VS31343718) was new in April 2013. In the last 3 years it has required 3 service repairs. Two under the extended warranty, one recent one 3 months out of warranty. All repairs came up in the last 3 years. The first repair addressed frost build up in the freezer. The second required replacement of the water filter compartment and the third will be addressing water dripping from the freezer door when I open it. Even after turning off the ice maker and removing the frozen puddle from the bottom of the freezer, it still drips water when I open the door. I have a call into service on this right now. I would like the company to fix the current issue even though it is outside of warranty. This product is too new to have so many problems and be just over 5 years old.

Whirlpool N50T91-403 purchased in Mar 12 had an error code 4. I knew the water heater had a safety installed in it when I was working on the plumbing and allowed it to drain the hot water side down to 16% of capacitance of 50 GL. After the plumbing issue was resolved, I saw the water heater had shut off (thermal protection) but the switch wasnt tripped as far as I could tell. Knowing small processors can only remember anything if they have power, I removed the Honeywell circuit board and with my multimeter probed all of the capacitors contacting them both (-) and (+) and in reverse order. Doing this forces the IC to forget its codes because they require a small amount of voltage to remember them, usually powered by a small capacitor. I reinstalled it and voila! Presto! It works again.

Cabrio washer - This was a huge disappointment, clothes not clean, sometimes still dry in middle even with small loads! Have had washer just over a year, second time it has quit working! This time it wont even give a code to why it wont spin out! Living on a budget, I cant afford such a shoddy product! Never again will I buy any product associated with whirlpool!

After 1 1/2 years, My new Cabrio washer lid hinge started to come apart and wont latch, so machine wont run. After a day or so it completely popped up and out of align. The lid has PLASTIC hinge. This is obviously a problem. We have been in touch with Whirlpool, but they say they cant help?? This should be a recall. We have been waiting on back order for a replacement Lid at OUR OWN EXPENSE since Sept. 20, 2015. I want to get this fixed and use my Machine again. We are Senior Citizens and this machine is used 3-4 times a week. Not abused.

After owning the highly recommended Cabrio for only 2 years, I was told it would cost $300 for the motherboard!! I have always used Whirlpool but this machine is terrible. Water saving is not an option when washing clothes. Unless I use the bulky cycle, my clothes come out dry and smell dirty.

I have been complaining since 2 months after I bought the Whirlpool Cabrio washer. It is the most expensive piece of junk I have ever bought. There is never enough water to thoroughly wash clothes. The clothes always tangle up. The UL comes on all the time because it is unleveled and clothes were so knotted up that I can’t get them out of the washing machine. I keep calling and complaining, but all I get from Whirlpool is that I need to sort my clothes better and not wash all pants together because the legs will get tangled. So, do I wash some of my dark paints with towels just to keep them from tangling up? I don’t think so. I paid $750.00 for this piece of **. It should wash a mink coat for that price. I keep checking websites in hopes that there is a recall on this thing. For sure, though, I will never buy another Whirlpool product after this purchase.

I purchased the top-of-the-line Whirlpool Cabrio washer and dryer. My washer is 6 years old and will not complete a wash cycle. According to the repairman, the drive shaft is stuck and it will cost $500.00 to repair it. When speaking with Whirlpool, their suggestion was to buy a new one and get an extended warranty. This company is a total disappointment.

No response from Whirlpool, but I did find out what the rust was. Instead of using stainless steel or plastic or rubber, the inside light frame is made of a cheap metal that has rusted and is literally falling apart, sharp and very rusty pieces were falling into the washer tub. No wonder I find holes in the clothes that werent there before washing. I removed what I could, including the part it should hold, a plastic plate that covers the light, protecting it from moisture. My husband covered it with electrical tape to prevent injury and possible electrocution. I contacted Whirlpool, but they have ignored my questions and have not answered. They do not have a replacement part for it (stated on their parts website) They give you no solutions to a problematic appliance that should have been recalled and taken off the market due to safety issues that have caused injury and possibly worse.

I think the whirlpool washer is a very nice machine. I think it does a good job of cleaning but still has the tub odor problem that a lot of front load machines have. As far as reliability it has done pretty well but I did have to replace the tub bellow and it is only 5 years old. It also makes a lot of noise so it is not a quiet machine at all. The steam option on the washer is a nice feature but not sure how much it does to help clean stuff.

Ive had other brands of washers and dryers and I must say I always return to Whirlpool. They are well made and do what they are supposed to. Never had problems. My last set of Whirlpool was about 12 years old. Great product.

Ive had this dishwasher for years and never a problem. My dishes are always clean and this dishwasher dries my dishes completely in a very short amount of time.

Had to return my first 2019 purchase due to refrigerator freezing food and imbalanced top doors. I was unable to get straight answers from Whirlpool and so the mgr at BB gave exchange same problems except door not as off. Cheap product make/model. A class action lawsuit from 2016 has occurred and the company continues to distribute the same issues in their new make/model.

I have always loved the Whirlpool washer and dryer, namely because it is made in the USA, but the newer model Whirlpool is disappointing. The low water machines are not as effective as the older models. Even set on a 2 cycle rinse I get suds in the clothing. The spin cycle bunches up the clothing you can hardly shake them out before adding to the dryer.

We bought our new Cabrio (washer and dryer) in the fall. Within 2 weeks, I realized what a piece of crap these machines are. They simply do not clean the clothes. I have complained to the store where we purchased them, and I was told there is nothing they could do as the machines are performing as designed? Im waiting for a class action suit to join to get rid of this junk. Curt

I dont know who is the bigger idiot. The designer of this washer or me for not reading the countless bad reviews. I bought a Whirlpool 4.3 CU FT TL WTW5000DW machine on 7/19/2015. It does not come close to cleaning clothes. It now takes me three times longer to do laundry because I have to check every piece of clothing for any stains. These are minor stains mind you but, they will not come out unless I use something like Spray and Wash. My time is valuable, maybe I should drag my clothes to the river and beat them on a rock. Very disappointed.

The space could be laid out a little better. The flimsy shelf is not real stable for foods or ice tray. Where the shelf locks into the side wall is not deep enough to stabilize the shelf itself. The flat indentations in the bottom, where they meet the front, have an edge that makes properly cleaning the freezer a bit difficult.

We get the error code F1 in the start of the cycle and when there is 21 minutes left, we have to stop and reset at least 7 times before the water fills. We put a new sensor in for over $200. The second problem is it goes off balance no matter what the load is. I was going to have it fixed (if possible). After reading all the above I wont waste any more money on it and go buy an old fashioned reliable washer. What a piece of money sucking machine especially when I dont have any extra money to waste down the drain. I wish I knew before. There are a lot of people this time of year I would have rather given the money for a needy cause. How disappointed we are with Whirlpool!

Whirlpool Cabrio HE washing machine - I was very excited when buying this product. It never really washed clothes thoroughly. I kept getting strange stains on them and even after emptying it as soon as it finally was able to finish a load without saying UL constantly... the clothes would stink. Im sick I ever bought it! Plus, it rusts terrible.

I purchased this machine three years ago. It is junk. I have had two washing machines and they lasted for years and years. Never had a problem with either machine. I purchased them from Sears. When I the Cabrio, I was told it was the top of the line washer for Whirlpool. Three weeks ago it started making a noise like a plane taking off. It wouldnt spin the clothes. The repair person said that it could be three different things the parts, for which, would cost in the vicinity of $200. However, since it was making such a loud noise and water was coming out from underneath the washer, he was certain the transmission was out. He said the noise was an indicator the bearings were gone. I didnt see much point in repairing the washer if the transmission was out because it couldnt be fix.There was a couple at Lowes purchasing a machine at the same time as myself. They said they had a Cabrio also and it was only two years old. It wasnt spinning the clothes either and making a tremendously loud noise. They told us this before we mentioned that we had a Cabrio also. I will neither purchase another Whirlpool product. Junk!

Very disappointed with this product as well as Whirlpools handling of the situation. I purchased this item 9/15. Its now 10/16 and the plastic that surrounds the glass on the shelves has cracked on 3 of the 4 shelves. The company will not replace because the warranty time has run out. The cost to replace and ship is around $500.00. Big disappointment.

Our daughter has a Whirlpool Duet front loader washer & dryer combination which is less than 3 years old. The washer shows fault code 71 and will not run or release the door lock. The first repairman said the interface board and/or a computer will need to be replaced. Cost is $600 to $1,000. I called Whirlpool. They recommended their trained tech be called out. He looked at the broken machine and determined the interface board was bad, and he put a temporary repair on the washer and said Its okay to use for now. He will return in 2 weeks with the replacement part. We tried the machine with a load of clothes. The machine filled up with water then quit, and the door was locked. We called to get a tech to open the door so we could retrieve our clothes. No one is available for 1 1/2 week. I called Whirlpool and was told a claim form would be mailed to me so we could be compensated for the damaged clothes. The letter arrived. I was appalled when I read it. First, it came from their Legal dept. The intent was to scare us into getting a lawyer or just use our homeowners insurance for the damaged clothes claim. I called Whirlpool back several times and was told too bad, so sad. Whirlpool might make a good machine; they cant prove it by me but their support rates a big zero.

I like Whirlpool, but the ice maker never worked right. Now l have to clean the ice off the dispenser about every three days. Other than that has been good. This is my third Whirlpool refrigerator.

Went to Lowe’s, as my old fridge died. Gets delivered & guys wore masks. After they leave the NOISE of fridge I could hear in bedroom! I called right away had to wait for a replacement from XPO about a Week. Guy shows up stinking like ashtray, No Mask to “repair” my brand new Loud Fridge. Heck no was to get replaced. I called Lowe’s 3 times & XPO twice. It’s now June 4th. I’m still waiting! 25cubic Serial #HRX0654908. Horrible customer no service!

Cabrio washer Model # wtw5840bw - I purchased this washer one year ago. It has a defect that comes along with it. You think your clothes are getting clean. But in reality they are not. This washer does not fill enough water to wash a small load of clothes. It has ruined three large bags of my clothes. Stained they smell in general they are not clean. Worst washer I have ever bought. General public Please be aware of this issue if you are going to purchase this washer. It is a big expense to be put out to the curb.

DOES NOT MEET CONSUMER NEEDS AS PROMISED. I wish I read the reviews. Very expensive machine I purchased specifically for the large drum for large loads. The machine cannot handle large loads (if you consider one blanket large load). I have to unplug the machine mid wash, as the load gets stuck on one side and moves my machine across the floor. The noise in the spin cycle with even small amount of laundry sounds like a helicopter is about to land. Then last night I noticed black oil splattered all over my floor. This is a $800.00 machine. Never ever met my exceptions as the machine promised to deliver. Theres very little water that enters the drum... Not even my towels come out clean. DO NOT BUY WHIRLPOOL... EVER EVER EVER.

We had refrigerator 2 years and compressor went out. Whirlpool would not repair. I will not buy Whirlpool again.

This washing machine has been nothing but a problem from the beginning. Theres always something wrong with it. Things that cost so much should last much longer than a couple of years! I have to clean out the drain about every 3rd time I use it or it wont spin out as well.

Washer Whirlpool Cabrio - Needless to say now, spin rinse not working, dark spots in clothes, sound like a jet leaving the room and earthquake at maximum potential when working, all previous reviews more than summarize my problem with the washer. How can we do to take a class action against Whirlpool for the defective Cabrio wash and dryer they are selling. If anybody knows, please guide me the right way to start it.

Water heater failed to maintain temperature. ** heads (more than 2) sent out by Whirlpool couldnt fix it! Calling the company was a waste of time! They run you in circles. Will never waste my money on a Whirlpool product again!!!! This was not my first problem with this company, but it is my last!

We have just built a new home and have spent a ton of money on appliances. I so wish I had looked up the reviews on this Whirlpool Cabrio Washer before we bought it. It makes a very loud annoying sound through at least a third of the cycle (which I was just told by Whirlpool is the normal agitating sound). We have also had to have service out here twice in the first few months because some of the clothes come out dirty in areas that were folded over because of lack of water even on the high water setting. It also, ripped my favorite white blouse right in half. Trust me DONT buy it, you will be sorry.

I have been given a runaround for over a month to get my refrigerator fixed. They gave me a defected piece and it broke down in less than a year. I have been calling them up every day and they put me on hold forever-then they ask for all the details and direct me to another company. As of right now I have not received any help-My family is really frustrated as we have no fridge all this time. I dont know what to do.

We just remodeled our kitchen and bought a Whirlpool kitchen suite in May of 2016. The refrigerator is absolutely terrible. I have had a repairman come out and fix the same repair/problem 5 times, a sheet of ice forms beneath the vegetable drawer (We have only owned the refrigerator for 5 months). Each time the repair person has come out it costs me a day of work due to having to wait all day for the repair service that Whirlpool hires out, well be there between 9am and 4pm. This morning I decided to check to see if the sheet of ice is forming again, it is. So I call Whirlpool again.Again, I call Whirlpool and ask if I can just get a new unit; 5 repairs in 5 months on a brand new refrigerator. The reply I get from Whirlpool is always well send someone out to fix it. The unit has to be deemed irreparable or a part has to be replaced multiple times. No parts are being replaced... no one knows how to fix it. I dont understand why a large company like Whirlpool would want people to write bad reviews for their products and customer service. Im extremely irritated with how I have been treated. I just want a refrigerator that works!! DO NOT BUY A WHIRLPOOL REFRIGERATOR!!

It has plenty of room. The compartments within the refrigerator are well organized. There is plenty of room in the freezer. Have had this for about eight years and going strong.

We spent a lot of time researching to make sure we were making the right choice, found the one that was right for us. When it got delivered there was a problem though, the plastic scratch protector film they put on the doors for delivery left an adhesive residue that looked like dull spots all over our new shiny black doors. I immediately opened up the owners manual to see how they recommend removing this blotchy sticky residue, assuming we werent the first ones to ever come across this problem, unfortunately they only provide generic cleaning tips. So I went to their website and found what I was looking for. I tried all of the cleaning methods they provide, none of them even came close to working. So I grabbed some adhesive remover and tried that, it worked great to remove the residue however my microfiber cloth (which they recommend explicitly) started leaving scratches all over the finish.I called the customer service to see about getting a new door delivered, thinking this wont be more than a 5 minute phone call since I had followed all of their steps they provide both in the owners manual and on their website. Heres where I find out that their policy DOES NOT cover scratches/cosmetic damage, period. I tried reasoning with them, I had them read their own recommended cleaning procedures, and we both concluded that I had followed their procedures to the T! You might think that if the all of the typical procedures didnt resolve the issue, that would be the point where the customer service reps would have the ability to make a decision that satisfy the customer, you would be wrong! They kept telling me over and over that their policy doesnt cover cosmetic, therefore there was nothing they could do. It was delivered with a defect of sorts, how is the customer responsible for that? The only way I can see it having worked out in my favor is if I had never tried to clean it myself and immediately called customer service, I still fear they would have given me the same line of cosmetic damages are not covered even if I would have tried each procedure with them walking me thru it over the phone. Lesson learned, I will never purchase another Whirlpool product!

When I first bought this machine I loved the big tub, but I was concerned that there was no agitator. It confuses me how clothes can get clean if there is nothing to rub them again. Even in the olden days they rub clothes against a board. Well my concern is valid and I believe the washing machine industry needs to go back to the old model, as this new version does not work.Here are all the problems: 1) The machine judges how much water to put in. This doesnt work. I follow the directions and outline the perimeter and dont overload, yet still it just barely puts in enough water to make the clothes wet. Im all for conserving the environment, but enough water needs to be provided to actually get the clothes clean. I would like to be the judge of how much water should be used, so I would like to be able to tell the machine if it is a small, medium or large load. I do believe that the lack of enough water is why the clothes do not come out as clean as they should and why they end up smelling (see #4). 2) There is no agitator, so there is really nothing available to help clean the clothes. Spinning them around like a maniac is not enough, which leads me to the next problem. 3) The clothes come out twisted terribly and then many times come out of the dryer wrinkled because of how hard they were twisted. I tried to select a less harsh spin cycle, but then the clothes are too wet to put in the dryer. There is no happy medium.4) Biggest problem to date: Our clothes/towels have all started smelling. You know that smell when you leave your clothes in the washer too long (like two days) and then put them in the dryer? Its that smell. The clothes/towels dont smell when you immediately take them out, but they do smell at any bit of moisture. When I dry myself off after the shower, I notice the newly washed bath towel smells like a wet dog. I have used the pods, liquid detergent and powder. I dont remember having the smell problem when I first bought the machine and used powder, so I just returned to using powder today. (Ive even tried doubling up on the pods, but the clothes still smell.)This leads me to problem number 5: When using powder in this machine, the machine does not empty the powder container completely, and so the clothes do not get the required amount of detergent. Often there are clumps left over in the powder dispenser, but not always. (This is what led me to go to the pods and liquid detergent in the first place.) But at least with powder (I use Gain) my towels dont stink after the first time I used them.I wouldnt recommend this machine. I really researched machines before I purchased this one, but they all had bad reviews, so how do you pick? And I never look at the good reviews because we all know so many people are paid to rave about products they know nothing about, or it is a company employee writing the review. This machine is a huge disappointment. I am going to try adding a rinse cycle like a previous reviewer suggested. Maybe the extra water will help with the smell. Of course this is not good for the environment though, so this whole way of making washing machines with no agitator and limiting water defeats the energy efficient goal.

Washer has rusted out after only four years. I bought my set from Sears, and thought I would get good use out of it for many years; but I am experiencing rust falling from around the rim of the washer. Very dissatisfied with the product, I will never buy another appliance from Sears again. I have always used Sears appliances but after this experience I would not recommend Sears to anyone. I was told that the warranty was for one year, and the rust would not have been covered anyway. Very Dissatisfied Consumer. I thought Sears would stand behind their products. Yea, right.

I needed a new washer and dryer, as I sold my other ones with my last house. I have been so happy with the economy of a front loading washer, and the clothes really dont require pretreating because Tide and the washer take care of everything!

I bought a brand new Whirlpool washer and dryer set -Cabrio- $1700.00 in 2011. It is by far the worst washing machine I have ever purchased, and I am 60 years old!!! It is now three years old and has been repaired at least 4 times. Long story short... after hours & hours on the phone, along with many threats! (By the way I had to ask for a manager two times up the ladder for this to happen as they just kept repeating that it was out of warranty coverage). I also told them that I was going to have one of my company trucks deliver this machine to Sears lot, along with a paid person to inform every shopper of my plight with this washer and the lack of service from Sears and Whirlpool! Whirlpool finally agreed to pay for the parts but not the labor on this most current repair. (This time it is the transmission!! In the past it was the Hub, twice. The gear case twice and the belt a number of times). I am now going back to Sears to request (that might not be the correct word) Demand, that they take care of the service bill for this machine. In between repairs, I have dealt with ongoing cleaning quality problems. This machine does not get clothes clean. I always have to wash them twice. This machine is loud. This machine does not use enough water to even dissolve the soap. So much for energy saving measures when you have to wash twice and still see soap and crud in the tub. Worst, worst, ever washing machine in my life!! By the way, I have an 8 year old Maytag too that I have never had to repair. Moral of the story, buy Maytag, or at least do not buy a Cabrio!!!!

Never buy a Whirlpool water heater. Theyre junk and they dont honor warranties. NO wonder theres a lot of bad reviews. Im one of those suckers. You would think Whirlpool would do a better job. But the blessing in all this I wont have to deal with Whirlpool again. Including washer and dryer, ref, stove, dishwasher and etc.