I bought the Whirlpool Cabrio topload washer (WTW7800XW2) in April 2011. In May 2012, I noticed the door was broken on both sides. It has now popped up and is broken so bad that it can barely be used without replacing it. I called Lowes, where it was purchased, to quickly be told that there was nothing they could do because it is out of the years warranty. This is just such a copy out to have an excuse, so that they would not even offer any assistance. Also, I paid $2,000.00 for the set; I bought the dryer as well. I just could not imagine an expensive machine like this having such a problem. Prior to buying this machine, I had my washer for 10 years. It has no problem; it was just time to buy a newer model, so I thought!After the store (Lowes) would not help, I decided to call Whirlpool; and the woman I spoke with was even less help. Andrea said there was nothing they could do since it was outside the year of manufacturers warranty. She seemed glad to have this as an excuse. I told her this is too much money to have something like this to happen. I told her it is obvious the door was defective. She said again sorry but that theres nothing she could do. She did offer to sell me a warranty for a year for $327.52. This was too expensive. I asked her what else could she do, and she told me nothing. I asked how much the door was, and she told me $212.00. I feel like I have been royally and deliberately ripped off, and Whirlpool knows it. I say to anyone reading this to please be aware if you are purchasing this product. You will most likely be sorry you invested all this money for it. You will get a companys brand that does not care and will not stand by their product.

Our 4 year old Cabrio top loading washer failed. Apparently there is an engineering design issue with the pump and tub assembly causing the machine to not complete its spin cycle. These items will typically fail between two to four years of operation. We paid $1,000 for what we thought was a high end machine from Whirlpool. After having a local repair company diagnose the issue, we were told by Whirlpool we must use their authorized service companies. After 6 weeks of waiting for service, parts and several trips to the laundromat, we had the repairs completed by Whirlpools authorized service provider. Within one week, our machine failed again, called Whirlpool and they said will not help us. DO NOT BUY WHIRLPOOL PRODUCTS!!!

A-10 error on display ultimately means needs a new pump. The washer (model WFC7500VW 2) is 3 months, 9 days old and is now unusable. I cannot get any service (under 1-year manufacturers warranty) because the sticker inside the door with the model and serial # is missing (i.e., it was sold to me by Homedepot.com without a serial # on the door label, sticker is intact and is brand new and apparently was printed without a serial #).I made multiple calls to Whirlpool in Benton Harbor, Michigan and finally spoke with Courtney (who states she was a supervisor) pretty much said all they will do is to reprint a label from the factory and I should have it in 7-10 business days. They refuse to stand behind their product and authorize timely repair of their product they sold to my without a serial # on the door tag from the factory. I have to wait to schedule factory warranty repair until I get the new label (probably 3 weeks plus without a usable washer). Courtney refused to contact me via email for any of her contact information or to supply verification of conversation or promise of a new factory label. Also, she refused to try to authorize any type of manufacturers warranty to fix the brand new unusable washer!

New water making loud pinging noises when burner shut off. Whirlpool referred plumber. Plumber stated this is normal. After few months heater would make loud humming noise when burner turned on. Called Whirlpool again. Said I had to pay for plumber to troubleshoot and if part needed I had to pay labor to replace part. Would never recommend this product to anybody.

I purchased this washer over 8 years ago and we have been using it 3 to 4 times a week/ 52 weeks a year since. It has performed flawlessly up until about a year ago when it kept given me uL error. Everytime I wash the basket always spins wobbly and unbalanced it seems. I checked the Internet and it turns out others have had the same problem. The solution was to replaced the 4 springs supporting basket and that fixed the problem. Been working ever since.

Not working at all and only 3 years old. Completely non-functional. No fridge or freezer. Lost all my food. Garbage. DO NOT BUY.

I got the Cabrio Washer and Dryer set in December of 2015. By March of 2016, the heating element and dryer door latch had broken. Had to have those repaired. By June of 2016 and since, Ive had several repairman out to the house trying to figure out whats wrong with my washer. 9 times out of 10, it will not spin the excess water out and the clothes are soaked. Sometimes it takes me an hour to get the washer to go through a spin cycle. Sometimes the washer wont go into a cycle at all, it just makes a horrible noise (like its draining) and never does anything. It doesnt put out enough water in larger loads, so Ive had to cut my load size in half. It wont work on half the cycle options on the screen, only working on bulky or heavy. Wont wash on normal or quick wash or any of the others. It will make that same horrible sound and do nothing. Nobody can tell me whats wrong with the stupid washer and the repairman said he sees issues with Whirlpool all the time. He said save myself money and buy something else. But I remember a time when a washer and dryer would last for 20 years. What happened to quality products and craftsmanship. I am so tired of the new and fancy appliances that dont last and these companies that dont stand behind their products. Whirlpool you should be ashamed. I will never buy another one of your products. There should be a recall on these particular Cabrio units especially after all the horrible reviews I just read.

We bought a Cabrio washer model #WTW7300DW0 and are very unhappy. The clothes come out of the washer dirty, with chunks of soap, (yes we are using HE detergent) and patches of lint on them. The low water design is a joke. The clothes on the top of the load never get into the water. The lid needed repair from the first day we bought it. We have tried all the water settings and the clothes on the top barely move. Why hasnt Whirlpool figured out that this design is just not working? Our three month old washer is headed out of our house one way or another! Notice we didnt give it any stars!

Purchased this dishwasher in January 2012, and it stopped working in May 2015. We replaced thermal fuse a year ago and just had to replace the control panel. It worked for 1 day and through 2 wash cycles, but during the 3rd wash cycle, it failed to drain and no power again, which is the same problem we had before. We opted to also replace the control board, just to be safe. Lol. What a piece of junk! Whirlpool is a pathetic excuse for a company, and, judging from others experiences with the customer service department, we will not bother contacting these ** since they clearly have no interest in providing any service at all to their customers. I have had many other lower end dishwasher models, and all of them worked well past the 5 - 10 year mark and never stopped working or required any service. I WILL NEVER PURCHASE ANOTHER APPLIANCE FROM WHIRLPOOL AND HAVE SPREAD THE WORD TO EVERYONE I KNOW. Good luck, Whirlpool. I do not expect they will be around in 10 years. Lol. Do not give your hard earned money to these idiots for the junk that they peddle, and please let your local appliance dealer know why you wish to purchase any other brand BUT Whirlpool. Consumers are not stupid, Whirlpool! You are ignorant for banking on that and should be shut down for your unfair business practices, not to mention misrepresentation of your despicable products.

My dishwasher was a $300ish model from Lowes. It is over 5 years old and has been reliable for a single persons use. It is run about once a week on average. Early on I had problem with it not cleaning well but that was the fault of one of those no leak supply hoses that restricted flow...fixed that. Would I buy again? Yes.

Extremely quiet machine. I love that the silverware wrack is situated across the front of the door giving plenty of space for lots of silverware. This leaves even more room in the already large washing area for pots, pans, dishes, bowl, glassware & more.

Heats up fast. Easy to operate, Love how everything cooks evenly. Its about the best oven and range Ive ever had. If you are looking for a range and oven that is one of the best. If not the best try it. You wont regret it.

We purchased a Whirlpool water heater at Lowes for $1100.00. Four years later it isnt working. There are no parts to fix it available at any store in Dallas, TX. We had to call the company. They made us pay the overnight shipping fee for the part. Then the part didnt show up. When we called to find out why isnt the part at my house, they said they found out FedEx doesnt deliver on Saturdays. No one ever called to notify us of this, instead the response was that they would use it as a coaching lesson for not notify the customer. We have now been without hot water in the middle of winter for 5 days. We have no idea when the part will arrive and if it will even fix my defective water heater. We will never buy another Whirlpool product and I strongly encourage anyone who reads this to not buy Whirlpool. They dont stand by their product and have horrible customer service.

Our new Maytag (i.e. owned by Whirlpool) oven/range is a stainless steel pile of junk. It takes FOREVER to pre-heat. The range elements take FOREVER to heat up. And like others on here, the Aqua Lift cleaning simply does not work. We put the oven through 3 back-to-back cycles and only the bottom gets a little clean. What a scam.

In 2013 my oven died. Upon doing some research my husband and I went to our local appliance stores in search of a new one for a good deal. We chose a Whirlpool electric range with convection oven. We have had it 2 1/2 yrs and have used it often... until today we had been very happy with it. While baking some French fries we heard a loud pop, almost like a shot, running to the kitchen to find the inside tempered glass shattered! Wow! Shocked to say the least we couldnt believe it. Called our Lowes store, to no avail our warranty had expired. They gave us Whirlpools number with no success. I am extremely disappointed and will probably never buy Whirlpool again!

I have had my whirlpool top loader washer 2/12 years. There are 3 adults in our household, but we do at least 1 load per day. During a spin cycle we heard a loud bang and then the washer starting spinning very fast. I called for repair and was told the cost was 500.00. Now I must buy a new washer as that cost is excessive and I see this is a common problem. This new washer will not be a whirlpool!!!

We bought a Whirlpool microwave model # GH7208XRY4 at the Habitat For Humanity store. It was brand new still in the unopened box with the warranty card in the box. The box was undamaged and in perfect shape. We loved this microwave until six months later, it started to throw a code F6 and wouldnt work - it wouldnt turn on or off and we couldnt use it at all. Since this is an under the cabinet model, it was a little hard to uninstall it as its a built-in. I called the customer service center and they dont cover it because the ordinal purchase date was 2012, we bought it in Oct 2014. I guess someone bought it in 2012. They say that since the ordinal purchase date was 2012, they dont warranty. They also said because I had bought it from the ReStore, it was a donated item and would cover it. I told them the box was unopened and it worked for several months, so their stand was it might have been damaged when I bought it. Again I told them it worked for 6 months, so how could it have been damaged when I bought it? They were very unhelpful.

I bought a French door Whirlpool refrigerator. It is very pretty. But you always got to double-check to make sure the freezer door is closed. Almost all my house guests leave it slightly cracked because it does not close conveniently like other refrigerators. Water freezes up all over the freezer. It even freezes the fan inside to where it starts making loud noises. I got a chip ice out of this freezer almost every day. I even had to defrost it completely to get the fans to start working properly.

My Whirlpool refrigerator model #ED5FHEXV001, serial #HR0248 - I have spoken to a couple of reps on the phone. I am very dissatisfied because it was like one rep I spoke with on the telephone advised me to buy an extended warranty and at that time, the company would consider alternative ways to deal with this complaint and perhaps replace the refrigerator. I did not want to pay an additional $100 for a warranty, unless the company would guarantee me a solution, preferably my money back. I did not really believe the warranty would help me after the warranty was expired. I would still have the same problem and I feel that in the event after the extra warranty expired, the company would tell me I should have kept the coils clean, which is my complaint. There is no way to keep the coils clean. I guess blowing out the residue, then all that residue material would end up all in my house. Also, very important, there have been 3-4 technicians to my house the first year. I was told various things to do, such as adjust the refrigerator to a lower setting and freezer to a little higher setting. One tech actually replaced a part? The second tech said he would clean the coils. The last tech told me the problem was my coils had to stay clean. My question is, how the heck is that possible with the coils on the bottom of the fridge and susceptible to a lot of dust and dirt, unless I move my fridge everyday? Most people do not expect to have to clean under the fridge each day and the coils would still be dirty anyway. It is very dumb that the coils are not on the back of the fridge. With the fridge coils on the back, I have never experienced this problem. Please advise what my next step would be. Thank you.

Purchased a Whirlpool Cabrio washer WTW5800BW0 September 2014. Two years and 8 months later it no longer works. Call Sears and Whirlpool and was basically told I should have purchased a warranty. Whirlpool tried to sell me an extended warranty for $495.00 which is about 80% of the original sale price of the washer. Was told it is my responsibility to care for the maintenance of my purchase. WOW. Way to stand by your product. So now its my fault they sell a product that does not last longer than 3 years. So we tried option 2 - called a repairman. His response save your money and buy a new washer. WOW. A repairman rather lose money than try and fix this washer. Save your money and pass on Whirlpool products.

I have never had such a horrible experience in my life as I have with Whirlpool. Refrigerator ($2,500) broke within three months, and then broke again another two months later and hasn’t worked right since. They have the most horrible customer service, parts are on back order, I’ve had to throw away hundreds of dollars worth of food because everything keeps freezing but they do not care. Ice machine has been broken for over a month for the second time. They are the worst company I’ve ever dealt with. Buyer beware. Do not buy anything from this company. Their products are the worst and they have zero customer service. Good luck if you buy something and it breaks. You might as well just buy a completely new appliance.

After the pilot light on my water heater would no longer stay lit, I contacted the Whirlpool technical support number listed on the unit only to be told my unit was still under warranty, but I would be responsible to pay a $65 diagnostic fee and any labor associated with a repair. The technician came and said my ventilation system was the problem and didnt even touch the unit. He then sent a report to Whirlpool that the unit was flooded which voided my warranty. He did not submit photos to substantiate his water damage claim and now Im being told the unit is unsafe and must be replaced at my expense. This all sounds like collusion to not honor the warranty! I will never purchase a Whirlpool product again!

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I purchased a condo last year with all appliances included. My Whirlpool refrigerator model is GI6SDRXXY00, a fairly new refrigerator. I noticed orange and moldy spots on ices when dispensing them. I changed the filter, thought maybe it is the filter causing the issue. But after inserting the new filter and emptying the entire ice tray, I still get bad ice! I open the compartment, and surprisingly, found out that the spiral rod inside the ice dispenser was rusted! This is horrible and unacceptable! This is not a user fault but a manufacturing defect. The parts that are in direct contact with what customer consumes should be robust and safe. I contacted customer service, and they gave me a technician phone number which turned out to be a third party which only cares about money. They said they will inspect the refrigerator and will charge me $134.00. I will not use this refrigerator anymore and will replace it soon. AND I will never purchase any more Whirlpool products. This manufacturer is crossed out from my list of vendors who I do business with.

Agree with some of the other reviews. Product misrepresented to clean oven effectively and does not work at all. You have to do all the work yourself because it is so useless. Oven also does not cook evenly. Front and back of oven cook at different rates. This oven should be recalled and all money refunded to purchaser!

My Whirlpool dryer - Model# wgd49stbw, serial# ms2405113 went out on 1-29-16. Which I purchased from Lowes in August of 2015. Called the service company that I have my extended warranty with. They came out on 2-1-16. They did not have the part I needed in stock. It had to be ordered by the manufacturer. Sadly, I am still waiting and have been told it might come in on 3-29-16. Every time I call it gets pushed out another two weeks. This is really ridiculous. All the money I have spend at the laundromat I could have had a different source come out to fix. Which I still may do. I will never purchase another Whirlpool appliance again and certainly will NOT recommend. I am 65 years old and have a hard time dealing with the laundromat. If they get this part in by 3-29-16 it will have taken them two months. So sad.

On July 19, I was forced to buy a new washer. Bought a Frigidaire which, when connected to the water supply, started immediately dumping water into the drum. Sent this defective washer back to the retailer and chose a new Whirlpool. O-M-I-G-O-S-H! It was delivered on 25 July and despite having 4 temperature settings, it only worked on either hot or cold AND you could never tell what temperature was going to be chosen by this computerized wonder. I repeatedly called Customer Support and received three different answers on what temperature was considered warm. The answers ranged from 65 to 102 degrees. Also, you could open the lid when the water was running in, which washers are no longer supposed to do. Whirlpool then arranged for A & D Service to come and repair my NEW washer and scheduled an appointment for a week later. I was forced to call that company to find out if they were even coming. When they did not show as promised, I cancelled the appointment and called Whirlpool to ask for another service company. They then scheduled me for two weeks later (now August 30th). The guy did come and told me there was user error - I had used too much soap as this was an HE washer. I asked him to show me where on the appliance and in the owners manual that it stated the washer was an HE. He couldnt find it either and said he would replace the computer and the door lock because his computer found that the washer was hit and miss on anything it was set on. At any rate, it is a little over a week later and I have heard nothing from the repairman and, of course, no follow-up from Whirlpool. Do not make the mistake of buying any Whirlpool product, and that now encompasses names such as Maytag, Amana, Jenn-Air, Kitchen-Aid and many more if you want to be assured of a quality product and excellent customer service. What if this had been a refrigerator? The whole debacle has been a nightmare. Wish I had bought a GE!

I purchased a Whirlpool Cabrio top loading machine approx 3 yrs. ago. When I first bought it, the machine was super quiet... loved it. I loved the capacity of it. About a yr ago I noticed it started making all kinds of noise, we cant have a conversation downstairs because its so loud. Turns out the bearings are broken. The technician was nice enough to explain to me that its a common problem with those machines. However, Whirlpool is not willing to stand by their product and repair it free of charge. Any other product would of been recalled and repaired. That goes for cars, baby products, and so on. But not Whirlpool, I called and spoke to Andrea in Michigan who told me that there is nothing that they are willing to do. After reading the other reviews and their terrible one star average rating it doesnt surprise me. Shame on me for not researching this product before buying. I hope this saves someone else from making the same mistake. In case your wondering, it cost me $117.00 to have the tech look at the machine. The labor would of cost $125.00 and the part is $251.00........

Do yourself a favor and do not purchase any Whirlpool gas heater product. There are numerous poor reviews on Whirlpool water heaters. The one I purchased, 50 gallon Whirlpool water heater; I had to replace the control valve three times. After the third time, (the water heater was less than 18 months old) I gave up and purchased another product. Whirlpool would not replace their poor product, but did replace the control valve, each time, which cost $100,00 labor each time. After the water heater was taken out, there were visible leaks on all connections. (A licensed plumber installed it.) Over a period of time, I lost a total of three days work, was w/o hot water three times for two days each issue. I hope I can save the next consumer similar difficulties with this product. Check consumer reports before purchase of this product. There are numerous complaints. Also, local plumbers can advise on how many issues they encounter with this product.

I have a new Whirlpool double convection oven which is very noisy. There is a rattle and pinging noise that occurs and the fan is also loud. Im not sure if it is an install or product issue. Can anyone comment on their convection oven? I dont believe this is normal. I am disappointed with my purchase and would opt for gas or basic electric. The double convection ovens were fairly pricey too.

The 12 year warranty, means nothing. The heater only worked for 30 months, and then its upper sensor fault code flashes, and the heater shut down. I called Whirlpool, and they have me use an ohm meter to help troubleshoot the problem. So if you are not handy, you are out of luck. They decided it was my control unit that is defective. They will send me the part free, but I have to pay shipping and installation. What a deal, and what kind of management would dream up of this. The heater is marketed as a 12 year warranty model (only on the tank). Would anyone, having been through this, buy another Whirlpool product?

Whirlpool washing machine was not a good buy at all specially after using it and seeing that over the years I had to incur high costs of maintenance. Over the months and years of buying Whirlpool front load washing machine, I had to replace motor twice, digital display twice, motherboard twice THAT TOO at a very high price every time something broke. This time the angle that supports the drum broke and Whirlpool says drum needs to be replaced. HOWEVER, after waiting a month company says DRUM IS UNAVAILABLE. Which means my machine has become absolutely useless just because Whirlpool does not have the spare. Whirlpool has a ridiculous track record with poor service and poor product quality. Manufacturing in one country and selling it in another WITHOUT SPARES is defective and poor service, totally unreliable. Wouldnt recommend Whirlpool to anyone.

I feel as though they could use some additional features, it’s also hard to change out some of the wiring in the back. I’ve had some issues with smells coming from the washers as well from them. Hopefully they can start to look into tweaking smaller details to improve the overall machine.

It is a very reliable and efficient washing machine. I enjoy the energy saving features as well as how clean my laundry is, no matter how soiled they may be. I would definitely recommend a Whirlpool washing machine to a friend.

On December 24, I was planning my annual Christmas Eve dinner when my oven just decided to quit working completely. This was the third time my oven broke down on me. I called Whirlpool and they pretty much told me theyll get to me when they can but it was the holiday. So I understood that it would be a few days. I had a technician come out to my house on December 27 and tell me that he needed to order a fuse. He called all over the state to find one but no one had one so he put it as an emergency. The technician did everything he could to accommodate me but could only do so much. So I waited and waited but heard nothing.Today, January 3, I called the department to see when my part was going to be here and they tell me January 10 - unacceptable. I called the management team and spoke with Tiffany who pretty much just told me, Sorry. You have to wait five business days to find out if the part is available. If not, then we can discuss sending new ovens. Why would we have to wait five business days from January 3 when it was ordered on December 27? Look, Im a very reasonable woman and this is the first time I have ever complained online about a company. But I have gone 10 days without an oven and I have a family that I cook for daily.My ovens are four months old so this should not be happening. And when it does, there should be parts to fix it or a replacement on hand because no family should have to go without an oven when they just paid a ** load of money for it. Customer Service should be a little more sympathetic and a little less about business because at the end of the day, theyre not the ones suffering, we are. Also if this part is on back order, that tells me that this probably happens often. Maybe Whirlpool should recall this oven model because whoever heard of an oven overheating? Get it together. I will spread the word of mouth about my experience!

On 16 March, I lodged the complaint to Whirlpool’s service center in New Delhi. My service request number is **. Engineer’s name is Dharmesh. He came for the first visit and he sent the person named Hassan who said there is gas leakage problem. I told him that problem is much more complex than leakage as I have already checked about the leakage, but he didnt listen and repaired and took Rs 2995 from me by giving 3 months warranty. The fridge again got damaged. Now, when I talked to Ms. **, she said the compressor is damaged and it will take Rs 2000 more, which means my earlier Rs 2995 has gone into vain and they are demanding Rs 2000 more, though it is in warranty. When I asked her that I want to talk to a senior manger, she rudely talked and refused. I called Whirlpool’s customer care on 01160008558. There’s a guy named ** who abused me and behaved rudely with me. The customer care executive doesn’t even have bit of manners as how to talk to the customers. It’s really a shameful thing which I had not even expected from the brand company like Whirlpool. I want very strict action to be taken against Ms. **, Mr. ** (CCE). I also want my fridge to be repaired as soon as possible without a single penny or I want my earlier Rs 2995 back.

Our just over 1 year old Whirlpool washer died completely last month (mid May). After calling them and being directed to the extended warranty dept (which we ended up purchasing), a repair guy came out and told us it was our main controller board. Three days later, he returned with the board and nothing. We were then told it was the user interface. They were on backorder until June 5, which means our machine would be out of commission for three weeks. I just received another call informing us the part was now on backorder until June 15. Whirlpool, on what planet is it acceptable for your appliances to be out of commission for six full weeks? Never again.

Whirlpool over stove microwave/convection oven model GH7208XRY-4 - I purchased this top of the line unit in April 2012 for a vacation home kitchen remodel. It wasnt installed until June 2012 and stopped working in May, 2013 just after the warranty period expired. The problem was with the touch screen panel that went blank and the fan/light control switches also failed. This unit has only had light use since my wife and I are retired and use it primarily for heating tea/coffee. I contacted Whirlpool customer service and they graciously offered to cover the cost of replacement parts but I had to pay a service charge of $125. The factory technician said the whole door needed to be replaced since the electronics were not readily accessible so it took about a week to get the replacement door which turned out to be the wrong one and needed to be reordered. The technician finally replaced the door and the faulty fan/light switch. Within a month the fan/light switch failed again but was still under warranty so it was replaced for free. A little more than a year after the last service the touch screen control panel began operating by itself changing screens and beeping randomly. This was somewhat disconcerting but the unit continued to work pretty normally until my wife placed a small plate of leftovers in oven to be reheated for 1 minute. She walked away to do other things and forgot about the food in the oven until we noticed a strong burning odor and found that the microwave was still running some 20 minutes later and had turned the food into a black mass of burned food and the plastic cover was melted and burned.I contacted Whirlpool service thinking that the unit was under warranty from the previous service but they said the parts only carried a 90 day warranty and my only recourse was to pay for another service call and purchase another door panel for approximately $400 or I could buy an extended service contract for $300. Needless to say Im not about to spend that kind of money to, at best, get another year of service from this inferior product. This is simply not a safe product that could have started a deadly fire if I had not been present to stop it when I did. I have probably owned a dozen microwaves from other manufacturers and have never had any kind of problem including a comparable GE unit that has been flawless for over 15 years. I am extremely disappointed that Whirlpool has cheapened its product line to such an extent but I suppose I shouldnt be surprised since I noted this product was made in China.

My family purchased a Whirlpool stainless steel dishwasher at Lowes for around $500. We were replacing a very old GE dishwasher which was so loud you had to leave the room anytime you started it because you couldnt even talk over it. We love the new Whirlpool dishwasher. It is so quiet we thought it was broken at first because we couldnt hear it running and even though it cleans exceptionally well we still sometimes have to look to see that the light is on to know that its actually running. The whole family agrees this may be one of the best purchases weve ever made. The only con I could think of is my son and I put the dishwasher in ourselves and this is the first one weve ever done and the instructions werent as clear so we had to redo the piping of the waterlines a couple of times to figure out in what order to be done. But everything hooked up correctly and worked immediately without a problem. Couldnt be happier.

Have had Refrigerator less than two years and the evaporator seal is leaking and all the Freon is gone causing the freezer and ice maker to quit. Will cost $700 to repair. Found out it is a known defect with Whirlpool. Called Whirlpool for reimbursement and they refused, saying they do not know anything about this issue. This is interesting since it is all over the Web with complaints. I have been a customer of Whirlpool for 20 years and they have lost me and everyone else I know.

I should have read reviews prior to purchasing the Washer and Dryer. The washer sucks big time. Does not clean clothes. Leaves soap in clothes. The repair man said use 2 tbsps. of soap. Still soap in clothes. I use 1 tablespoon of HE soap. 2 1/2 hours for 1 load because I have to use deep water and extra rinse on first wash. Then I wash again with no soap. I HATE this washer. Whites are now yellow after washing. Cannot do lightweight comforters. I am at the laundry mat more than using my new washing machine. Dryer is ok but does not remove any lint from clothes or towels. I always trusted Whirlpool. Not anymore.

My 4- to 5-year-old Whirlpool Cabrio 6300 began to display errors recently. F1 was the 1st error code I encountered. After giving the washer a hard shove and rocking, it began to work properly again... for a while. I noticed on some large loads that I was getting an LD Long Drain error. I could hear the pump running but with little water flow. Eventually, it would time out and give the LD error. A service tech was called and determined that the water pump was defective, although the impellers inside appeared okay and had no foreign objects to impede its spinning. After spending $225 for the service call, the LD error resurfaced about an hour after the tech left. Tonight I got the F1 error again, and once again the washer responded to a sharp rap. The replacement control board, which the F1 error code involves, is $220 plus labor. $440+ for a repair to a $600-$700 washer? Im going to dissect the main control board tomorrow and look for loose or corroded connections. I cant understand why the LD code occurs when I can hear the drain pump running... just very little comes out. Other times it empties like Niagara falls... I cant understand why it works sometimes and fails others. The pump is either on or off. It doesnt have multiple speeds as far as I know. Im not sure what to do next... probably try to re-sell the new pump that was installed to recoup some of the money I paid for a non-working Cabrio. This seems to be a very common occurrence.. Have any class action suits been mentioned? If so, please feel free to contact me.

Whirlpool Cabrio drain problem - I never had a washing machine that lets so much through to the drain pump. I replaced pump three times already. First of all, if you put anything with buttons in this machine, you can kiss it goodbye. This machine destroys clothes then lets buttons and coins and whatever through to destroy the fins on the discharge pump. When is the BBB going to do something about this consumer ripoff?

Water heater was defective from the factory with a pinched wire between the thermostats. After replacing everything on the heater Whirlpool would not reimburse any parts or labor for the unit... Whirlpool is dead to me now, and forever and I love to tell my story to prospective buyers of their products!!! So far, to date I have cost them about 14 sales of major appliances (and still counting!!!). After reading some reviews… Im (sorry, I omitted the personal insults) in respect of your review guidelines.

Purchased this washer 7 months ago. We are a family of 5 with A LOT OF LAUNDRY!!! I adequately researched a machine that could do large loads of laundry, WELL. I read at least 100 reviews and went forth. (Note to self that anyone giving this machine a decent rating, is a DIRTY, SMELLY, FILTHY LINEN WEARING FOOL who doesnt take much pride in their clothing cleanliness.) I proceeded onward and after paying A LOT OF MONEY for this 4.8 Whirlpool Cabrio Washer, I found out within the first two days of owning it, that IT IS GARBAGE! Regardless of the 4.8 drum size, you can only fill it less than 1/4 of the way with clothes, to even hope they will be touched by water. My clothes come out DETERGENT STAINED & DRY! Insanity... A washer that doesnt wet the clothes!!! We have had 4 repairmen come out within this time, because I am fed up! I have been physically shown and told now, by all 4 guys, that the washer will not fill more than 9 inches with water. They advised me to fill Home Depot buckets and throw them into the drum. THIS IS WHAT I DO, TO SATISFY THAT I AM WETTING MY LAUNDRY - PURE CRAZINESS! The repairmen told me to set all loads to bulky sheets + extra rinse + highest soil. This is a 1 hour, 26 minute initial setting. Note that my adding water messes up the computer readings and it will reset throughout the washing cycle multiple times. Even with all of this... the machine still doesnt wet the clothes!! The top and center of the load is BONE DRY! This machine will not wash sheets, blankets or comforters, either. Dont waste your time trying!!! Dont be fooled by the drum size. Your great grandmothers 1930s 1.6 cu ft washer washed more clothes in any given load. #1 My water bill is through the roof. #2 The washer constantly resets and runs on any single load for over 2.5 hours AND #3 MY LAUNDRY PILES HIGHER AND HIGHER, as you cannot put more than a smattering of clothes in the machine, at any given time! GARBAGE, GARBAGE and MORE GARBAGE!!! I would be better served to find a stream and a flat rock and start doing my laundry colonial day style! I am done... Finally had enough of this insanity! RETURNED THE MACHINE THIS MORNING!!!

I will be brief. Bought Whirlpool ref. model #WRF560Smywo4 on April 15, 2016. The refrigerator quit work July 29, 2016. Called Whirlpool. They responded they had no repairman in our area. After several calls they scheduled a repairman. He came and put on a part. It did not work. Called Whirlpool again. They sent the same repairman. He stated it needed a new compressor. A week later he arrived with the part (August 12, 2016). As of now the refrigerator is working. Now this was two (2) weeks without a refrigerator. This has been a bad experience. I WILL NEVER BUY ANOTHER WHIRLPOOL APPLIANCE AND RECOMMEND THAT YOU DO NOT PURCHASE ONE.

I have recently bought a Whirlpool Cabrio washer/dryer combo and I wish I had read your reviews before doing so. I spend quite an amount of time washing, re washing, rinsing dark clothes to end up washing them by hand as the washer leaves unsightly white streaks on them. I have tried switching from hot water to cold, using very little detergent, buying clear detergent, then organic detergent, extra rinsing, etc. to no avail. Very frustrated and disappointed. I would gladly join any class action to stop Whirlpool selling these useless but expensive washers.

Purchased at Lowes and within days of installation the water would heat up so hot that it would spit and spew out of kitchen sink (10 away) and be so hot you couldnt hold your hand under it. Returned to Lowes and they reluctantly replaced it. I should have bought a different brand but I felt confident that it was just a faulty thermostat. Second one did the same. Tested different settings and it seemed to work ok but a few days later it was scalding hot again. Tech support kept telling me that water heaters are intended to be used or they are like a kettle of water sitting on a flame. I told them they were crazy to think a small pilot light could heat 40 gallons to scalding temp.Guess what? I left the heater on the pilot setting and with 40 fresh cold gallons in it. I returned 24 hours later to find it scalding hot again. I got down and looked through the view window and I couldnt believe the size of the pilot light. It is the biggest pilot light I have ever seen. It blows like a mini blow torch! And there is no adjustment. This is a serious engineering flaw and extremely dangerous. This heater is at my father-in-laws house and he probably doesnt use 5 or 10 gallons a day but still, NO WATER HEATER SHOULD EVER HEAT WATER TO A SCALDING TEMPERATURE WITH ONLY A PILOT LIGHT!!!

After years, the gas hot water heater model fg1f5040t3nov went out. The plumber had me get a new part. 2-3 weeks ago, it went out again. I am trying another new igniter assembly. If it goes again, Im getting a new heater - not a Whirlpool! My plumber says he can get me a new one for a little more than I spent on the Whirlpool, and its much more dependable.

I have had this washer for a little over one year, it now does not work! I had a service tech out to look at it.. The motor gets too hot and the switchboard stops working. I have called Whirlpool twice and the options they have given me are not good! Basically it would be about half the price of a new washer! I should not be having these problems with a washer this new! I am very disappointed with Whirlpool and wont purchase this brand again!

Whirlpool Gold Series Dishwasher - I wish I had discovered this website BEFORE I bought this piece of trash last year to replace our antique Maytag that ran like a champ for 10 years. But after 10 year the gaskets wore out and it started leaking. Even at ten years old that Maytag cleaned and dried better than this brand new Whirlpool. My complaints are the same as everybody else here. Doesnt clean even slightly soiled dishes and then it doesnt dry any of the silverware, or plastic pieces like measuring cups and tupperware. All are totally wet and need to be hand dried. So, why am I cleaning the dishes beforehand and drying them after??? The only good thing I can say about this unit, is that it is quiet. But, as my husband said, so is a brick, and a brick would be just about as good at washing and drying our dishes. Buyers Beware!!! This is a terrible product. Turned me against Whirlpool appliances forever.

The dishwasher is less than 2 years old, out of warranty, and will not start. The repairman said the problem is in the electronics. It would cost $500+ to repair.

The machine has an infinite water level setting, an agitator which I feel cleans clothes better, separate settings for water temperature for both wash and rinse cycles, and the ability to soak prior to washing by just leaving the lid up. You can add bleach and fabric softener to dispensers that will add to the tub at the time needed. My machine has been a really good one.

Bought this washer two years ago. First experience was when a load of towels became wrapped around the agitator. Called in service tech who told me to load the bin with the cloths pressed against the bin wall away from agitator, as if the cloths/towels would stay away from agitator. Two years later, Im ready to the machine to the street. Forget sheets and bedding. The agitator wraps them so tight that I almost rip the cloths/sheets to unravel. I had to wash a pair of work pants that were soiled with mud three times and there was still a stain. I will NEVER EVER buy another Whirlpool product.

My Whirlpool side by side refrigerator which is not 7 years old has had more repairs than you can imagine. After paying over $1,500.00, I have had a repair service come out at least 5 times. Today, they say I need a new compressor at the tune of $850.00. This combined with my other repairs would add up to around $1,300.00. I am certainly not going to invest any more money in this refrigerator. I wouldnt recommend a Whirlpool Gold for anything. Dont know which brand I am going to purchase now as they certainly dont make anything like they use to. Totally disillusioned!!!

We bought Cabrio washer & dryer a year & half ago, and I hate, hate, hate the washing machine. Every load, it goes off balance. And you have to stop your other work, unlock & wait awhile on that, and rearrange your load of clothes. I called the repairman when I first had it, and he said, Oh yeah that happens, nothings wrong. OMG! How I wish I had returned it. If you dont rearrange the load when the cycle is done, your clothes are still soaked. So you have to re-drain & spin. Total waste of money & a lot of my time. Very very dissatisfied and will never buy another Whirlpool product.

GX5FHDXVY04 French door fridge. Ice maker backup issue - which cause water to build up and leak out of fridge. Fix was a known issue with a rubber grommet - $100.00. Fridge stopped blowing cold air - control board - $293. Fridge stopped blowing cold air again! Getting Nowhere with Customer service... Whirlpool used to be a great brand. They have lost me as a customer, and by the looks of this board, Facebook page, I am not alone!

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

I have a rental home and my residence, I have purchased a fridge for BOTH places. Within 1.5 years, both of the fridges shelving cracked. Customer service will not do anything to remedy this. It is a known issue with his model of appliance. There are numerous complaints and they DO NOT stand behind heir product. NEVER BUY WHIRLPOOL.

I bought a whirlpool W 10632082A a yr ago. I read the reviews and thought it was a good product. I was wrong. It has never washed the dishes good. It has terrible screens that always get clogged. The dishes never get dry. I think the dishes would get cleaner throwing them in the yard and spraying them off with a hose. I would not recommend this product at all.

Purchased a self-cleaning Whirlpool oven - model number RBS245PRS06 at Home Depot. Spent extra for the self-cleaning feature. The oven had slight use and used maybe once a week. Cooked a big Thanksgiving meal and decided it was time to use the self-clean feature for the first time. One hour into the process the oven shuts off, no longer has power, and the oven door is locked and will not open. Called Whirlpool (talked to 2 levels of customer service), they wanted me to buy a $200+ warranty for another year of coverage!Researched online and talked to the parts people and this is a KNOWN defect. It happens frequently when using the self-clean feature. It requires replacing the Thermal Overload Safety Thermostat which costs $45 with shipping for the part. The service call is over $100 PLUS labor which can run even more. There are YouTube videos that show how to replace this fuse. The parts lady recommended NOT using the self-cleaning for this oven. Buyer beware. If you are in the market for a new oven do not consider this Whirlpool model. THIS PRODUCT IS DEFECTIVE AND WHIRLPOOL WILL NOT STAND BEHIND IT ONCE YOUR 12 MONTHS IS UP.

I bought a Whirlpool Gold refrigerator in 2010 from Lowes. Within months it had a Freon leak and Lowes had to replace it. I had bought the extended warranty. In 2011 a part had to be replaced twice due to excessive noise. Then the freezer got frost buildup on a coil in 2012 and again in 2014. I called Whirlpool and asked if they would pay for my next 3 year warranty. They said no, it was my responsibility after the first year. I would never buy a Whirlpool product . Do research, Whirlpool makes several brands.

Purchased WRF989SDAM00 French Door refrigerator in 2013, and 33 months later it is not cooling (fridge 45/freezer 36 degrees). Service call diagnosis is a leak in the sealed component area. Since it out of the 1 year warranty period, nothing is covered. This is the first of Whirlpools dual evaporator models, and is technically challenging according to the service technician. Most likely one or both evaporators are defective, and this type of failure comes with a recommendation to change out the compressor as well as it is moisture compromised.As my previous Kitchen Aids had 10 year sealed component warranties, and the Whirlpool is the same base mechanism as the Kitchen Aid, I contacted Whirlpool to see if they would extend my warranty coverage to these sealed components. Website submission - never got an answer. Called the customer service line - they politely told me they were sorry but there is nothing they can offer me. Even the extended service plan would not cover me as this refrigerator has a preexisting problem and it must be 100% operational to begin an extended service contract.Im extremely disappointed in this fridge only lasting 33 months, in comparison to my previous Whirlpool/Kitchen Aid refrigerators. Of course the internet just allows me to see that Im not alone is purchasing a short lived appliance. So here is my contribution to the internet of things: Do not purchase Whirlpool refrigerators expecting them to last much beyond the warranty period. Buyer beware.

Aqualift technology does not work!! This is absolutely the worst product I have purchased from Whirlpool. The aqualift technology DOES not clean the oven, even if you clean the oven after EACH time you use it! I am not able to bend over and spend the afternoon in the oven. And even when I do, I cannot get this oven clean!!! Please DO NOT buy a Whirlpool stove with an aqualift technology oven cleaning process!!! You WILL be sorry!!!

I am very upset. I bought a Whirlpool range (model YGFE461LVS) 2 and a half years ago and today when I tried to bake a cake, the oven overheated (as if I had put it on broil) and although the display box showed that it had turned itself off, the oven kept heating and getting hotter and hotter, I had to unplug it. I feel like I have bought disposable appliances! How could I have such serious problems after only 2 years? To top it all off, this past week my fridge (also a whirlpool, model WRT779RFYM10) also started acting up. Water is leaking all over inside the fridge and the freezer. I have to clean it up everyday.

We bought a side by side refrigerator/freezer in 2013 from our local Best Buy. We have usually bought Whirlpool appliances. Before we bought this refrigerator the last Whirlpool we had for 25 years. This past week our refrigerator went out. We called a repair man. He said the circuit board was out and would cost $450.00 to replace it. We decided to buy a new one. I am very disappointed that it only lasted 7 years. Oh I forgot to mention the ice maker went out about a year ago. We did get new filters as instructed. We did not buy another Whirlpool.

For the last month, in order to wash dishes, we have to start the dishwasher normally. The water will begin to fill the tub and then stop and all the display lights go out. We push the cancel/drain button and the dishwasher empties the water in the tub. We again, push the desired wash cycle button just like the first time and the dishes wash normally. We have purchased at least two of this same type dishwasher with the utensil holder in the door from Whirlpool in the past, with great satisfaction.

We have a 2008 Whirlpool gas range that has worked reasonably well but lately more and more of the electronic push switches on the keypad have stopped functioning. So now I cant set an oven temperature as only a few of the 10 number switches still work. I talked to an appliance repair guy who said that the typical electronic keypads are notorious for burning out after 3-5 years because of heat transfer from the oven. So now Im stuck with an oven that is virtually unusable and a $400-500 cost to replace the keypad control. Is it worth replacing? Can the faulty control buttons be somehow fixed? Shouldnt Whirlpool acknowledge the faulty design and provide a free (and hopefully better) keypad? There must be thousands of people out there with similar circumstances. What about a class action suit? Any advice/opinions out there?

After 2-1/2 years we started having trouble with the spin cycle on our Maytag washer. We live in an area with no repairman. Whirlpool want us to pay just to talk to us. Now the timings off. It will not spin out.

Bought the Cabrio washer in March 2011. Have had the same problems as everyone else. The machine is constantly off-kilter, does not wash well due to lack of water. Sounds like a freight train when spinning. Bulky clothes dont drain properly and have to be rinsed and drained a second time. After one year of ownership, the entire control panel had to be replaced. The next year, the same control panel had to be replaced again plus a water valve had to be replaced. Thank God I bought the extended warranty. The repairs would have cost me $1000, more than I paid for the washer in 2011. Total piece of junk. AVOID AT ALL COST!!!!

We had bought a whirlpool refrigerator (Model - DC 205 5S/2016) in late April 2016. Initially I noticed a whirring sound after 6-7 hours of switching it on. As nobody from whirlpool had come for installation or any follow up even after requesting, we let it go thinking that nothing could go wrong with a new fridge. Nevertheless, the disturbing sound continued, until I noticed exposed wires running crisscross atop the freezer box and below it, one even preventing the chiller tray to be pulled out easily. Also, we had to get a stabilizer to reduce the notice even though it was written in big bold letters that it was a Stabilizer free refrigerator.After 8 months of owning it, we went for a three-day trip leaving the refrigerator on and set at point 3 in the cooling knob of which 5 is the maximum. On returning back, I noticed a crack at the top right corner of the freezer door and saw that ice had built up covering that side of the freezer inside. Again, as I had to leave for office within 1 hour, I let it rest and went. In the evening we noticed that the crack had extended, so we defrosted the fridge. The next morning I found a small piece of the freezer door floating in the defrosted water, and the freezer door was unhinged and askew at the top, in fact a part of the freezer doors upper right hinge had broken due to maybe the pressure of ice buildup, which had caused the crack that we saw.Shocking it was at first to learn that a freezer door be made of such low standard material ignoring the other fact of wires jutting out of the freezer at top and bottom. As the warranty period was 12 months, I immediately called the customer care, who put me on hold for 8-10minutes and disconnected, this repeated 2 times after which I was frustrated enough and vowed not to use the freezer again.After almost a month a more responsible member of my family took it upon himself and raised a complaint which was answered and a service person came home with a dirty looking and completely scratched piece of replacement door for the freezer. He informed that plastic pieces never came in warranty and we had to pay for it. Upon asking for further clarification he called his manager, Hemanth who was too rude and informed Madam you have pulled the freezer door apart which has caused this. Also, he was asking me specifically are you lying as you said initially that you left for 3days and now you said 5 days? We had left on a Friday night and came back on Tuesday morning, which means 3 complete days out of station. I never knew the exact number of days mattered as a fridge was supposed to be switched on continuously for days.Also, finally Hemanth was informing like if it was some mechanical or electrical fault we could have done it free of cost. So, I reported the whirring noise and the wires jutting out of the freezer tray. He blabbered at first and then informed me that the sound might be due to voltage fluctuation if you are not using a stabilizer (we were using one even though the fridge was a stabilizer free operation one, phew) and the wires issue he completely ignored claiming it as normal.So we paid in full for the dirty and scratched replacement door and also had to be called as liars and blamed that we had literally pulled off the door. Also, he was the most unprofessional manager that I had ever spoken to as he closed the conversation with, If it was LG or Samsung, they would never even have come for service like this. Enough was enough... Never in my life would I have anything to do with whirlpool nor will suggest this brand to anybody.They use such low-quality products. The warranty promises are just scam + even the managers are so insulting and bad mannered to the extent that I never want to deal with them anymore. Also, they dont think twice before just blaming the customers for their low-quality products. In all my years so far I have never come across a brand that treat their customers like this.

Purchased a Whirlpool hot water heater from Lowes. Heater has 6 year warranty. Hot water heater is 1 year old and the pilot would not light. Contacted Whirlpool warranty department to what the failure cause. A new control was sent and replaced by a qualified journeyman plumber; still not working. Called whirlpool warranty department, told control valve must be faulty. We have gone 5 days with no hot water. I am not waiting another 5 days to get hot water. I am having the plumber take out this worthless Whirlpool heater and haul to the scrap metal business. That is where I should have sent it from the get go. Dont purchase a Whirlpool product. The money should be spent on a product that works and will last.

A few weeks after we bought it, the washer was already having issues spinning out, and the clothes would have to go through another rinse and spin cycle. A bout a year and a half in and I had to replace the pump because it stopped draining. Even carefully loading the machine, and at least two or three times a week it would not spin out. Two weeks ago it stopped agitating actually performing washing action and spinning out all together. Last night I replaced the actuator which controls the speed or lack thereof in the spin. Still nothing. Ive reset it multiple times, still nothing. At least the clothes are getting wet. At tax return time I am replacing this piece if garbage and I will never get another whirlpool, or Maytag washer again because from what I have been told by dealers and repair men; they are all garbage.

The oven will not turn off. When I called Whirlpool and told them what had happened they immediately put me in contact with the safety division. My question is if it is a safety issue, why is there not a recall and why do I have to pay for the circuit board. If there is a safety issue why is there not a recall.

They are good washers but they are overpriced. They have way too many functions for doing laundry. I know everyone wants their washer to do it all but the machines just can’t. There is no washing machine in the world that can sense a stain and pinpoint it and remove it.

We purchased a side by side Whirlpool refrigerator/freezer in June 2011 and have had nothing but problems with this piece of crap appliance. Ice maker has been repaired 3 times, water line clogged twice because of freezing and thawing. Now the machine only cools both sides to 45 degrees F. I am having a repair person come out on Monday to tell me what is wrong but I am so upset with the poor workmanship of this product I dont want to put another dime into the repair. We paid $1100 on this and have paid at least $600 in repairs over the past 4 years!! I agree with all of the other comments on the poor manufacturing choices. We had a GE prior to this and it lasted 10 years but we had the same issues. Repairing it every few years. I am not sure what brand to purchase next. If anyone has a suggestion I would be open to it.

I am 72 years old and this Whirlpool Energy Star HE Washing Machine is just useless. It does not clean clothes properly. It always leaves a stinky washing machine smell which never goes away despite no matter what you do. A completely useless, faulty washing machine! Never ever buy a Whirlpool HE washing machine! Some websites say that you need to buy a washer fan at a cost of $69.99 and attach it to the back of your washing machine as this is the only way you can get rid of the smell. Who has that kind of money? Why is this fan not already included in this washing machine if Whirlpool is aware of the smelly washing machine/smelly clothes problem? This is such a joke! We would like to be reimbursed for our deficient Whirlpool Washing Machine or at the very least, have a recall of this inefficient, poorly designed washing machine. Report them to the Better Business Bureau and anyone else you think can resolve this problem - thanks!! - Unhappy camper

Two and 1/2 years prior we bought a new whirlpool range - W10201511 WHT. After one year we had to replace a computer module at the cost of $500.00. One year later we encountered the same problem. Today we went and bought a new Kenmore stove rather than keep putting good money after a bad Whirlpool product. Very disappointing.

In 2008 bought cheaper Whirlpool washer, had to return it to Lowes. ELLL DUMOH (me) buys yet another Whirlpool Washer from Lowes; a Cabrio. The Cabrio ONLY worked 3 years, and started having problems with not emptying or just continuing to drain and beep. The Whirlpool Customer Service lady is pitiful. Yeah... I can SELL you another set of shock absorbers... that might help. I can SELL you a recirculating pump or a drain pump... Pitiful, sorry attitude. Goodbye Whirlpool.

No matter what I do after I wash clothes on quick or deep water cycle or even running the cycle over again, the clothes are left with soap residue. This is very annoying, particularly on dark clothing because it stands out. If I could start over, I would purchase a washer with an agitator. I watch the clothes as it goes through a cycle and the clothes stay in the same position...no wonder they dont get clean. What a ripoff!!

Whirlpool fridge still freezes water in the bottom of freezer... after five service attempts. We purchased a five-year warranty and so far, they claim that as long as the warranty is good, they will continue to warranty it. We now have three and a half years left. We have currently owned our refrigerator for just over a year (approx. 18 months). During this time, it has had the same warranty repair issue that has been serviced five times so far. We now have an appointment for a sixth time since RC Willey does not want to fix a lemon the right way. The first three warranty repairs were under the manufacturers warranty. We are now under a warranty (extended) that was purchased from the place we bought the fridge from, RC Willey.I want my money back on the whole deal. I was going to be civilized about it because I thought they were common sense decent place to buy from. I thought they would, through common sense, realize that this unit is a lemon and allow credit towards another fridge. In just the past two years, we have bought from RC Willey over $10,000 worth of flooring, appliances, etc. and thats not counting previous years.

We purchased a Whirlpool Duet front load washing machine Model #WFW9550WL in July 2009. In July 2016, the guide on the door hinge broke, making the machine unusable. When performing a national search for the part number (#8183202) to replace the broken hinge, I found that there were none available anywhere in the United States. When talking to Whirlpool, they indicated that during 2015, they only sold 142 of this part, and were currently looking for a new manufacturer for the part. They further indicated that the part would not be available until late September or early October of this year.

Mid-sized, mid-range dishwasher. It is noisy, not quiet at all, and we must speak quite loud over it if we want to be heard. The wash cycle is quite long... not really a water saver.

Purchased Model # wtw5000DW0 Jan 3, 2015. Aug 15, 2015 started leaking water. Certified technician came to repair. Aug 17 - new transmission. Sept 3 replaced new transmission with another new transmission. Sept 8 called master technician at Whirlpool, needs new clutch assembly. Both technicians stated they dont know what is wrong with the machine. Sept 10 new clutch assembly and agitator replaced. The machine still makes a horrible grinding noise and is unusable. The technician has replaced everything but Whirlpool says it is still fixable. The Master technician has no idea what is wrong with my machine yet he refuses to call it broken. I have been without a washing machine for 3 1/2 weeks. They refuse to offer a return authorization number. I have spoken to a Supervisor on the phone. She states the warranty is for repair. They wont admit their product is a piece of garbage. They have lost a customer. She stated she will put my complaint in a file.

I have had this Whirpool Cabrio washer now for one year. Clothes always come out wrinkled (even after drying). It leaves clothes unclean and leaves white streaks in clothes. Water level is so low in, that it cannot rinse or wash clothes properly. After washing towels, when removed to put in the dryer, soap is left in towels. I have had a repairman here, he says the design is bad, yet reports works as designed. Dont buy this washer. This is a piece of junk!

I purchased the original Whirlpool water heater from Lowes in April 2008 for $372, and an installation charge of $443, grand total - $815. In February 2012 the tank leaked profusely, enough to ruin a section of hardwood floor in the room behind the garage where it was installed. Whirlpool provided me with return authorization, and Lowes provided me with a replacement water heater. So far so good. Since the original installation was done through Lowes, the replacement had to be as well, according to Whirlpool, but now they charged $500 with tax to install the replacement water heater! Grand total now is $1315. Fast forward to May, 2014 and the replacement water heater, just barely 2 years old, shuts off with a code of Bad gas control valve/thermostat. I call Whirlpool and an extremely rude 20-something staffer tells me the unit is out of warranty by one month! The replacement unit has no warranty at all - nada - only the original one does... Is this unbelievable or what?! BUT, they would be glad to send me the replacement of the defective part for $200 PLUS overnight shipping charges, and I would be responsible for all labor charges to install it. Had I opted for this my original $372 water heater would have wound up costing me in the neighborhood of $1800!! I told her in no uncertain terms what she could do with the repair part, and now I am going to go shopping for a water heater that will last me more than 2-4 years, and you can bet it wont be a Whirlpool, and it wont come from Lowes.

Mold in my dishwasher right after having washed the dishes!! This is the first time I have seen the mold on the racks (lots of it!). However, my neighbor also has a Whirlpool and complains of the mold all the time. Also, my dishes often do not come clean. I would not have purchased a Whirlpool, but it came with the house, three years ago. Therefore, I do not have a receipt for it.

Too many times my clothing comes out dirtier than what it was going in... Sometimes my clothes come out dry in spots, never washed, lint and white soap spots on clothing as if never washed after a whole cycle. Huge waste of money and time. Cant trust any positive reviews about Whirlpool, they have to be rigged!!! I will never purchase another Whirlpool product again.

I waited years to buy this machine. I hate it!!! I agree with the other bad reviews. It destroys clothes. There is barely enough water in it to cover the bottom of the machine much less the laundry. Even deep water is a joke. It does not clean. I put it on the hottest water temp and I can put my hand in there and it is barely warm (it is not my hot water heater). My lightweight comforters come out all tacky and grungy in the middle. The softener dispenser (I use vinegar) dumps in the laundry (no it is not over full) (no I do not slam it shut). I can not let anything soak because the machine will drain after a few minutes and all my detergent, scent crystals etc. are all wasted. I feel like I have to take a survey and complete a questionnaire every time I do laundry. Can someone tell me how to put a comforter in there and leave that little middle eye open? They say the water saver is government regulated? Yup I need the government to do my laundry... I believe in saving water. I have a water saver toilet, shower, faucets. However I can not clean dirty jeans in a gallon of water. My clothes do not even get wet. How does whirlpool get away with advertising this machine can do king size comforter? The gentle cycle will tear apart anything I might put in there because there is no water and that blooming thing just twist and turns so it tears anything delicate. This is the 21st century. I think I should not have to babysit my washing machine. Why should I have to readjust everything in hopes it might be almost clean??? Place this here and that there, wipe the lint out before doing dark laundry. This machine belongs in the dark ages. It is so complicated yet it achieves nothing. A big rip off. I so tired of crying over this purchase. I hate this machine!!!

I purchased a Whirlpool electric water heater in August of 2008. The unit had a 12-year warranty on the tank. On January 21, 2012, I discovered that the water heater sprung a leak somewhere in the tank shell; it’s not the pressure relief valve, thermostat or anode port. The tank was never abused and operated well within its design limits. Not sure what caused it to start leaking into the catch pan and out onto my laundry room floor.I purchased the tank at Lowes and went for the longest tank warranty to reduce replacement intervals. I sent Whirlpool an email on 1/22/2012 explaining my problem and I referenced this site. The next day 1/23/2012 I receive a call from Whirlpool (Chris) asking me about my problem. I explained again and they gave me an RMA number and told me to go to Lowe’s and they would replace my hot water heater. I went straight to Lowe’s customer service and within an hour I was on my way home with a brand new hot water heater. Thank you, Chris, Whirlpool and Lowe’s. I am very happy with my outcome on this issue.

Handle needs smarter design. I purchased model #WRT311FZDM00 in November of 2015, didnt install in my new home till December. I am a single senior female, so there is little wear on the fridge, unlike a family of several people and with kids. The door handle actually broke just behind the screws that hold it in place, the plastic part of it broke into a couple of pieces. The cost to replace this handle is approximately $80, which is ridiculous in my opinion. Please start making things of quality materials instead of cheap plastic, especially at a stress point of a part. Even I know better than that. All 4 of my major kitchen appliances are Whirlpool, as well as my washer/dryer. I thought I was buying quality products. Hopefully things will hold up better with the other ones.

I found this site while looking for a part number for the thermocouple. Lowes had one, but not for the FG model. I decided to call the number on here from Chris to see where I could buy the correct one with left-handed threads. I was told that they would sell me the conversion kit, but I couldnt get just the $8 thermocouple. Then $47.90 later and the conversion kit is on its way. Im not happy about it but at least I got 6 years out of my water heater before the thermocouple failed. The plus side is next time, I can get the $8 part from Lowes and not be without hot water for a week.

Cabrio is our washer and dryer. Dryer had no issues in the last 7 years. Washer constantly throw UL or unbalanced error and stops. Rearranging clothes only works for another few minutes. First time under warranty, tech came and fixed it. Second time without warranty, I cleared some loose socks between the tub. Third time same problem. YouTube suggested to change the springs on four corners that hold the tub. $25 and problem fixed. Basically, if you are not an informed consumer you are screwed for $$ silly stuff.

11 months after I bought the fridge it started acting up. I paid 1900 for this thing. The temp kept getting warmer and the ice maker quit working. I had to pay for a service plan. Ill never buy a piece of junk Whirlpool product in my life again and ill broadcast their poor quality to everybody in my 5000 congregation. I work to save up to buy this product and its junk. Ill end donating it. Im very upset at this junk product produced by Whirlpool.

I purchased a Whirlpool Cabrio in 2009. It worked so-so over the years but recently stopped completing cycles, citing false load balance errors and leaving towels and sheets sopping wet at the end of a cycle. Three repair appointments later, and still no success. I am thoroughly disgusted that such an expensive machine only lasts four years. Based on the service techs attitude toward the machine and other consumer comments, Im guessing I will have to replace it. You can guess it will not be with a Whirlpool machine!

Cabrio Top Load Washer model WTW6800WW1 - Although we were very happy with the vendor where this was purchased and happy with the majority of the washer function; there is a problem with the cabinet & lid connectors rusting. Specifically, the lid connector on the left side totally rusted out, and also around the bleach cup, rust. There are also rust spots where the seam of the top section of the washer meets the bottom part. The washer was purchased in 2009. We have had it serviced in the past, prob 5 years ago, it needed a new motor and the rust was beginning to show then, while under warranty. I recently called Whirlpool and the associate told me that she had never received a call with regard to this type of problem. She did give me names and phone numbers of appliance repair in my area. I find it odd that Whirlpool would not make their associates aware of issues like this. I searched online and saw more than a few complaints about rust. So on it goes, no recourse, and as I read about the problem from others reporting this; it was mentioned that the vapors from the bleach cup etc, contribute to the rust. Additionally, even if it was under warranty, I was told that this is considered cosmetic and it would not be covered. Until... and I can only suppose, that until the lid possibly falls off while lifting, the cosmetic ruling may then turn into a function problem. Now there is also a squeaking sound, so off to call the appliance repair, check the cost and next time... buyer beware. I guess a lesson in science as well, hopefully this design flaw will be corrected for the next models in process.

The refrigerator I have is 3 years old and the service tech will be at my house on Thursday to put the third comp. in it. I have lost all my food 2 times. Times are hard. I would like to talk to a person not a machine.

Purchased a Gold Series Whirlpool dishwasher, Mo. No. WDT720PADW2, From Maruszcak in Schererville, In. on 1-29-16. Approximately a year later door was replaced by Whirlpool because of paint problem due to faulty design. Replaced door is now peeling and rusting by exhaust vent also. Contacted Whirlpool and they will do nothing more. They said it was a favor the first time they replaced the door. They feel this is a cosmetic problem! I paid a total of $675.03, Their repairman would charge a $100.00 to look at it and another $235.00 for a new door. I feel this is a design problem and they should replace it with a new model, a refund would be better. Very unlikey, because Whirlpool does not stand behind their products. The line also includes Maytag, Jenn-Air, Amana and Hot Point. Besides this I have found plastic pieces that have fallen off! I had to use plastic ties to keep them in place. Dishwasher does not clean well. Have to rinse everything first. Products are bad, stay away from them!

My mother bought these two years ago along with a washing machine and fridge. And now they are falling apart. The dishwasher wouldnt clean the dishes so my mother called the warranty people. It took a week to have someone come out and say it was fixed. The very first load it wouldnt clean the dishes. Now it takes another week to have someone to come out and say they need to order a part. Once the part gets here two weeks later it took 6 hours to fix. They replace the whole bottom half of the dishwasher, could have easily replaced the whole unit. Now a week later the clothes dryer doesnt turn on.

The oven works well. My complaint is that the glass door is very difficult to clean. Some kind of liquid got in between the panels and I cannot clean the glass without removing the oven door. Im afraid to remove the door as I may not be able to get it back on the oven. I have dirty glass I cant clean and that makes me unhappy. Otherwise the oven works just fine.