I purchased a Whirlpool microwave at the end of November 2015. Since then it has needed repair 3 times. Now I am being told it is not repairable. Microwave is only 1.5 years old and Whirlpool would not stand behind its product and provide additional warranty service or even a discount toward a new one. When I asked to speak with a supervisor I was just left on hold, 20 minutes later I hung up! Poor customer service!

Remodeling kitchen. On Sept. 2017, bought new Whirlpool microwave mod# WMH5352OCS, Actually put to use on Jan. 2017, by Nov. 2017 started getting open door errors by late Dec, 2017 completely quit working. From what I have been reading they barely make it thru the warranty period. Maybe they will run longer if one doesnt register the appliance. Especially with the crappy service for the ones that tried to have it repaired under warranty. I purchased it at Costco online, my next complaint will be to Costco, hopefully theyve gotten more complaints and pressure Whirlpool to stand by their product, NO MORE WHIRLPOOL FOR ME EITHER.

We recently bought a Whirlpool front loader even though the reviews kept mentioning mold and odors. I discovered that there was a water buildup in the soap dispenser so after every load, I remove, clean and dry the soap dispenser. The machine does a great job on cleaning clothes and I am following other suggestions on cleaning the drum from time to time. By the way, I bought my machine at Lowes from the scratch and dent department and with a little negotiating, I paid half price! Good deal and so far, good machine. Good luck and remember to remove and empty the water from the soap dispenser!

Amazing pice. Would recommend to anyone. The heat is great. The oven is amazing. I got this for my birthday and my kids were helping me to get it and I was so excited to receive it I was crying. Amazing machine, wish I had two. Would definitely buy again. I especially love how clean the oven top looks and how the knobs for the burners are easy to use.

I bought my glass top stainless electric Whirlpool range in April of 2019. It worked great until December 2019. Four days before Christmas my daughter was home alone and using the oven to heat up dinner. She smelled a terrible smell and there was a ton of electrical blue smoke. She called me at work and I told her to turn it off. My husband came home as I was talking to her and pulled out the stove. The place where the stove meets to cord had burst into flames. The wires in the cord were so badly damaged they were all exposed and singed. Our house could have caught fire! The whirlpool company will not stand by their product. They blamed it on the team at Lowe’s who installed the range...Lowe’s has been nothing but confusing and frustrating to deal with! I can’t believe how we’ve been treated. Do not buy whirlpool! These stoves are dangerous!

I bought my Whirlpool refrigerator (Fresh door with Ice maker) from Best Buy in July 2017. By 2019 December the ice maker had stopped working and the refrigerator turns off / shuts down automatically. Have confirmed that the power is still on because of the display on the door. So it is not a power issue. Paid $180 for a Whirlpool authorized consultation and they said the Ice maker motor does has stopped working and the computer board needs to be repaired. This will cost me around $800. Called up customer service to see if the cost can be lowered but of course they said a NO. I am truly upset with the brand and with Customer Service for their lack of empathy.

Thank you EPA for requiring water limits on manufactures of washing machines. As a result, I am forced to use the deep water and extra rinse functions to get clothes half way clean. So much for saving water! This Whirlpool Cabrio machine cost way too much for such lousy results. Additionally, I have to purchase a special product and clean my machine every month or two. Ridiculous!! I yearn for the old days when I could wash my clothes and they would actually come out clean.

Special features eg changing HE detergent conc. ratio for auto add feature in Load and Go is impossible to find, extra rinse doesnt work. No extra spin which would be useful for bulky loads. But preset cycles work fine and machine has very low vibration a big plus.

I purchased a gas range stove about three to four years ago. I am extremely dissatisfied with this Whirlpool stove. This is the second time the electric ignitors have been replaced due to the stove not working and it is still not working right. The gas valve regulator has also been replaced because it went bad too and my oven still isnt working. I have already put around two hundred dollars in and no one has any idea why it isnt working. Apparently these stoves are a real piece of ** and everyone is having the same type of problems. Something should be done for the customers as it is now. I will never buy Whirlpool again. What a piece of garbage!

The American Standard 95% 2 stage variable furnace is by far my favorite furnace to install. I know exactly what to expect from this furnace and I have had zero factory issues with this model. Outside of making a few sheet metal transitions this American Standard standard 95% furnace was very easy to install as well. And like the 2 stage variable … no factory issues.

The Whirlpool engineers need to go back to design room sober on this machine. It is only a year old and still I have to run one load two sometimes three times just to get clothes clean. How is this energy-efficient? I have tried all of their so-called remedies. Paying such good money for a lousy and lazy appliance is hard to swallow!

Whirlpool fridge (model no ETILFKXKS) - I purchased this fridge from a very good dealer (Trail Appliances, Edmonton). Within a year, I had my first of the frozen water drain from top freezer to water pan. Of course, I blamed myself - too much warm food, blah blah. Now this is happening more and more often. The fridge is kept at number 1 of 5 for coldness. All foods are left on counter to cool, but three times over my Christmas holidays this year when I swore I would throw this fridge in the garbage - the drain froze, water all over the fridge, food having to be removed and placed in other peoples fridges, blah blah. Now it did it again this weekend! There are only two living here. I work all day and no one even opens the fridge much and again this happened. Im really sad that such a faulty product (too much insulation hiding the drain pipe behind the fridge and it must be much too small in diameter; otherwise, it wouldnt freeze up). Talking about work. We have two fridges there with 50 people using them all day and they run perfectly for the last 8 years that I have been there. So I think it indicates that my fridge is faulty. Im so sad too because I dont have the money for a new one. I just turned 65 and am about to retire (single mom). You would think that a $1,300 fridge would last longer than 6 years!

In addition to my refrigerator dying after 3 years, my microwave died after 4.

I have had this washer for a little over one year, it now does not work! I had a service tech out to look at it.. The motor gets too hot and the switchboard stops working. I have called Whirlpool twice and the options they have given me are not good! Basically it would be about half the price of a new washer! I should not be having these problems with a washer this new! I am very disappointed with Whirlpool and wont purchase this brand again!

I have a model FG1F4034T3NOV water heater that was a problem since day one. The pilot will not stay lit, and apparently, there was some sort of class action lawsuit due to a defective part that I missed out on because I didnt know about it. The telephone representative is quick to point out that it is out of warranty due to the date of manufacture and that it needs about $200 in parts because I cant find the receipt from 4 years ago, when I bought it from Lowes. The company flat out refused to do a courtesy replacement for parts or discount them.

We bought our Duet washer in 2007 with a three-year warranty. In 2010, the washer started banging so we called it in for repair. It was determined that the bearing on the drum was bad, so the entire drum assembly was replaced because the poor design of integrating the bearing into the drum. Almost one year to the day, our washer started banging again. The washer is no longer under warranty. We were told the parts are around $400 plus and another $400 for labor.The repairman was from the store we bought the washer and he is a certified Whirlpool repairman. He related to us that this is a very common occurrence for Whirlpool washers because they are using cheap foreign made bearings. He services this problem on a weekly basis and Whirlpool will not do a recall because unless it is a safety hazard, it is not a concern to them if consumers have to pay out the nose for cheaply made parts. This repairman informed us that during training at a Whirlpool class, he learned that on the main board of the washers, they could put a 2 cent lamp that would indicate a bad board which would simplify diagnosis, expedite repair and reduce service time, but Whirlpool wont do it because it isnt cost effective. The repairman told us that we can call customer service until we are blue in the face, but Whirlpool wont give a ** because it is out of warranty. He sees this happen all the time with Whirlpool. My wife called Whirlpool Customer Service just to be told we are ** even though the cheap, crappy bearing that went bad was done under warranty, a year earlier.Well Whirlpool, I guess you lost another customer who will make sure that you lose a lot more customers. We are going to take our business elsewhere and we will make sure all our family, friends, neighbors and coworkers know how bad your customer service and poor attitude is toward consumers. If you cant back your products when you put cheap foreign garbage parts in your product, then you need to lose business and get out of the market.

This washer (Cabrio 6th Sense Washer) is less than 4 years old and now needs $500.00 worth of repair. You have to replace the tub in order to replace the bearings. If your washer starts to make noises during the spin cycle, you are in for a big repair bill. I still havent decided if I am going to repair it or junk it. The towels always smell sour even if you wash them twice.

I bought all new Whirlpool appliances for my house. After three years, the dishwasher is now broken and the washing machine is now broken as well. The refrigerator has had service two times in the past three years. The only thing that works is the stove that I bought. Whirlpool is all junk.

I bought a front loading Whirlpool washer a few years ago after having my old top loading Kenmore for 25 years. It seemed okay, but I did always have to leave the front door open and it always smelled musty, which was of some concern. My clothes never smell totally fresh. The biggest current problem is that several months ago it started with a failure code, alternately would stop without draining, wouldnt fill, or wouldnt drain, and ultimately ended up flooding my basement. So we called for service and they replaced a sensor and said these machines seem to have a lot of service issues with sensors blowing and motors dying. So I paid them that time. Now its a month or two later, failure code again, calling for service one more time. But if it costs too much I will join the legions of dissatisfied Whirlpool customers and will switch to an upright competitors brand.

We have had a Whirlpool hot water heater for 4 years now. Every three months something has to be replaced on it. Customer service does nothing to help and when we called Monday about a replacement part they told us they could no longer sell parts for that specific heater due to it being in a double wide. I contacted several more people and found out that heater was fine; all we needed was the part. The customer service woman was very rude and not willing to help at all. I told them we don’t have the money to keep replacing their piece of **. I ended up having to order yet again another part that was just replaced 2 months ago from Lowes. So after being with no hot water since Monday, now on Friday it is fixed, I wonder for how long. We do not recommend Whirlpool for nothing and will never buy a piece of ** from them anymore. We have a Whirlpool refrigerator that is causing us problems. I hope to soon get different brands in here to replace what Whirlpool can’t seem to make accurate.

I bought my house in 2009, and the previous owner bought this refrigerator in 2005. By 2012 The light and temperature read out went out. A circuit board had to be replaced. I have a home service company that I pay for yearly which takes care of the appliances. As usual, the fine print on the back of the contract said circuit boards were not covered. When I went online to purchase the part, the cheapest I could find it was $180. My service company said they would not cover it because they break down so frequently, with Whirlpool as the biggest offender. They gave me a discount and charged me $125 for the replacement. Whirlpool is making a fortune on these defective parts, which last long enough during the warranty period, and then you are on your own.In 2015, after the refrigerator was 10 years old, the compressor died. Hundreds of dollars of food spoiled. My service company said I was covered for the replacement, but I would have to wait 5-7 days for the part to come in. I was so furious that a refrigerator of this age would break down on me. The repairman told me he has seen these Whirlpools break down after 5 years. He said they are junk. When I was young, we moved into a new 20 story building in 1963. All the apartments had the same refrigerator made by Frigidaire. I lived there for 26 years. When I moved out in 1989, that refrigerator was still there working perfectly. It never needed a repair. I never heard anyone complain about theirs either. How is it that in 1963 a company could build a workhorse of a refrigerator, but in 2005, Whirlpool, a company in business since about 1911 makes this junk? I will never buy a Whirlpool product, and will tell the world not to do so as well.

We bought the set washer/ drier from Lowes in 2008. The first problem was that it wasnt rinsing well. After finishing the washing cycle, clothes were still dripping water. It took us to make several phones calls to get the problem solved. Also, the clothes were smelling bad and needed to be wash again. Now we are having another situation that it start the wash cycle but it wont finish and shows a code F35 or sud.

Bought this washer in 2013 for close to $800. About a year and half old it got real loud sounds like a freight train. Asked whirlpool repairman about it, and was told it is a main bearing going out. He said it would cost over $500 to fix it. Whirlpool warranty sucks - only one year. Called whirlpool, told them the problem and asked if this is a problem with this washer. Got told no they have no problems with it. Found out later not only do they have this problem with it they change design because of it. Repairman said his own daughter had same problem and he had many service calls on this model all with same problem. WHIRLPOOL WILL NOT REPAIR OR REPLACE PRODUCT WHICH IS A MANUFACTURE DEFAULT. It sets in our house unusable. I will never buy a whirlpool product again. Sad because that use to be all I would buy.

I purchased this Maytag clothes washer in 2007. So far Ive had to purchase and replace the front door 2 times. The current one now needs replacing. The plastic near the hinges disintegrates after about 2 years. This appears to be a manufacturing design defect. I have requested from Whirlpool to send me a replacement door for my washer. The part number is 34001178. The model number is MAH2400AWW. The Serial number is 14060452LE.I have spoke to four different levels of employees at Whirlpool after escalating the service request. Each time they have told me they are unable to send a replacement door to me, stating that the product is out of warranty. I realize that the washer is out of warranty but I believe this problem is a design flaw. The plastic near the top door hinge breaks down and cracks after 2 years of normal use. The last person I spoke with Michael (would not provide me with a last name) said to write to the Whirlpool corporate office with my complaint.

I bought my fridge in late 2008 and I am already experiencing potentially expensive repairs due to what I believe is a defective design system, of which, consumers are having to bare the consequences for those who collected our hard-earned cash and delivered a lousy product! I saw so many similar complaints about the ice system on this fridge that I am almost positive that it qualifies for a class action suit and settlement. How about a collaborative approach to this since we have all suffered needlessly? Tell me what you think and if you are in on it.

I just replaced a 4 year Cabiro washer with a Samsung. The washer was making terrible loud noise when spinning. It sounded like a jet plane. The repairman said it was a bearing that was going out and that it was a common problem in the Cabiro washers. Cost to repair it would be $500.00. Last week, it finally started spewing oil from underneath so had to buy a new washer. I will never, ever buy anything made by Whirlpool. Whirlpool said it was off the one year warranty (duh) and they wouldnt help with repairs.

I purchased my refrigerator from a home improvement store in October 2013. We paid around $2,600 for it. About a week ago we had a power outage and the refrigerator never came back on. I called Whirlpool repair since it was still under warranty. The said it would be 9-2-14 before they could come out. Today they came, did not have the part but said it would be here in 10 days. We will be without a refrigerator for 3 weeks. This is totally unacceptable but what can I do?

I Purchased a Whirlpool range with self cleaning. I do not recommend anyone to purchase these ranges. The self-cleaning does not work at all. Like numerous reviews that said you can run them several times to do the self cleaning and they do not clean at all. Save your money. Do not purchase a whirlpool appliance!

We purchased a Whirlpool upright frost-less freezer (model # EVL201NXRQ05) in October of 2008. So, you see, it is not even four years old. A few months ago I noticed that some things in the freezer were very soft. I looked at the back of the freezer and there was some ice buildup around the area where the coils are located. I took everything out of the freezer and removed the panel over the coils. There was major ice buildup on the coils. I completely defrosted it and dried it out. I restarted it and it seemed to be working okay. But a few days ago, when I got something from the top shelf of the freezer, it was not even frozen. So, here I go again. I removed everything from the freezer and have defrosted it again. However, this time, as soon as I turned it back on, the ice started building up on the coils immediately. It is impossible to contact anyone at Whirlpool that gives a crap. We have also been having problems with our Whirlpool Gold refrigerator. We have spent over $250 on it and it still is not working properly. I would love to just throw them in a ravine, but we have spent a lot of money on these appliances. We thought that Whirlpool was supposed to be number one in appliances. What a huge mistake we have made and it is costing us dearly.

I bought a Whirlpool front loading washing machine 5 years ago, which has given me constant trouble. The computer on the machine is not working. When it is fixed, the machines makes extremely loud grinding noises and frequently the spinner does not work properly, leaving you with heavy sodden wet clothes. Whirlpools guarantee is very limited and customer service is unhelpful except to apologize for your horrible experience. You will have to pay for a technician to diagnose the problem. I will have to replace this costly machine after just 5 years of unreliable service. I would never buy a Whirlpool product again.

I purchased a Whirlpool Gold side-by-side Refrigerator on June 15, 2013. The freezer works fine but the refrigerator does not feel that cold and when I put a thermometer in there, it reads 42-43 deg although the refrigerator is set at 37 deg. The tech was just here and told me to put a thermometer in a glass of water and read it again. His thermometer read 46 deg when reading a bottle in the door although he explained that he had had the door opened for a while during his visit. He said his reading of the bottle upon opening the door was 36 deg. I do not believe that. I just measured some bottled water temperature and it was 48 deg. I have a hard time believing the temp went up 12 degrees and he has been gone for a half hour. My food is cold but not like you expect from a refrigerator. My bottled water and soda, etc., are not very cold. The worst is the water dispenser. That water is barely cooler than tap water. There is almost no difference. The water temperature has been in the 60s when Ive measured it. The tech says the first glass wont be cold (have never had that with any other refrigerator) but even if you get the second and third glasses of water, they arent any colder... maybe a couple of degrees. If anyone else is having this problem and Whirlpool will do nothing, then Im interested in legal action.

Awful customer service. We bought a washing machine in 2010 and it has shredded a ton of clothes over the years. I called customer service to see what they could do to help me with this problem. After about 45 minutes of trying to get more than a service that I would have to be responsible for, the supervisor offered me a new washer at a discounted price. I went online to compare and found out I could purchase the exact same washing machine at home depot & best buy for $50 cheaper. I called back to see if there was anything they could have done and they would not budge.Shame on you Whirlpool. You have lost a customer and I will make sure no one I know buys one of your products ever again. I cannot believe that you would not make any accommodations for us. We bought that washing machine with the intention of keeping it for 15 years. It has cost us countless amounts of blankets, shirts, pants, etc. I cant believe you wouldnt help us after all the money this piece of junk cost us.

Whirlpool with four burner and the model that you self-clean the oven. It had all the features I wanted and Whirlpool has been around for a long time. Cost was right for my budget and it had all the options to it. I would have to move it out from the wall to find the model. Love the oven and the fact that I dont have to use caustic cleaners to clean it but simply have to wipe the dust out. One burner does not work and I will have to get it repaired. I shopped at a scratch and dent sale. The price was right and I could barely see the scratch and it had all the usual warranties. I need moderately priced appliances and if there were expensive features on it that I have not previously used, I would probably decline it. I do basic cooking and do not need expensive accessories. I can on my range and I have found the burners do not hold up well for canning. The burner I use for canning is the only one I have had problems with. That is the only problem I have had with the range at all. If anyone plans to can, consider purchasing the coil that is heavier to sustain the weight of the heavy canner. I would not be afraid to purchase Whirlpool again. My range is about 10 years old and other than that burner, I have had no difficulty. It is a mid-price range.

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

Very reliable. Handle large large loads of laundry. Do not have to prewash any clothes. I will always use this brand.. My parents used this brand while I was growing up. There is no other brand I will use. Thank you Whirlpool!

This started Sept 27 2017 when the ordered online electric range 30 inch slide in oven Whirlpool brand was delivered. When using the oven, a noxious diesel smell filled my home, despite multiple attempts to burn in the unit as advised. 10 days later after still trying to burn it in fumes got worse. I called corp who then sent over a tech to look at it and the tech shared with me when he arrived that he was the wrong person since he cant smell due to an old injury! He admitted he smelled a chemical when it first went on but it went away for him but might have went away due to is impaired smelling ability. I called Corp back and they totally agreed something was wrong with it that could not be repaired and the unit should be picked up and I should be paid back that day it is picked up. They said in a few days which later turned in 2-3 weeks out and counting... I filed a complaint with the BBB due to the ongoing issues. Corp office said they would pick up unit and at that time hand deliver me my refund in full. At first the pick up was weeks out but after BBB was notified they came yesterday 10/18/17 and removed unit, but no check! I called Corp again this time asking why I did not get my money as they promised she said someone dropped the ball, and that someone should have told me that since they had to get someone non-local to get it that they will mail me the check in 14-21 days! She said I see in the notes. They told you they would hand deliver you your refund so they should have called you about the change.So here I sit... No oven in use since Sept 18 and no money back to buy one for weeks yet. I have never been told, despite my requests as to what the chemical was that I was burning off in my home and exposed my family to over 10 days which we had headaches and nausea from (despite windows opened and fans going at full blast). Only that it might have come from the manufacturer or process. This company isnt the only one who has had issues on occasion with a defect in this never-ending chemical smell but the lack of regard of my safety concerns and failure to stand up to what they offered to do (poorly handled response) is simply wrong and bad business. I have not dealt with Whirlpool regarding matters ever and have very little of their products in my home so unsure if this is unique or standard with them. I wont buy their products anymore because I am less than very dissatisfied with my experience. I may have been the only unlucky person having this kind of response from this company but felt the need to share.

Bought a Whirlpool Gold stainless steel refrigerator and the thermostat didnt work after a couple months of use. Lost all the product in the refrigerator and freezer and whirlpool would not compensate us. They did pay for the $29 part because it was under warranty but still think it was completely their fault for putting a defective thermostat in it. Last night the relay on the circuit breaker stopped working and I again lost all my refrigerated food overnight. This time it is not under warranty because the warranty was only good for one year. So, I just paid $314.03 to have it repaired. So angry that I spent so much money on 4 Whirlpool Gold products when I remodeled my kitchen.

I have owned Craftmaster 30-gallon hot water heater and the only things reliable about it is trouble and aggravation. I purchased this in 2004. I have had to replace the controls, valves, wires, etc. three times in 10 years. And Im now looking at doing it a fourth time. The design of these parts are utter crap! Cheap plastic! After replacing these parts, this hot water heater works great for a few years, then invariably starts acting up. The pilot light goes out when the heater is supposed to kick on instead. Getting the pilot light lit again, is an exercise in futility! The red reset button once released, immediately extinguishes the ignition flame. Supposedly, after holding it down for 1-2 minutes allowing gas to build up, it should light the coils... and if it doesnt, youre supposed to wait 10 minutes to try relighting again. You can repeat this process for 12 hours, and if you finally do get this temperamental piece of junk to light, youre lucky. Customer Service has been useless in assistance. All they want to do is send you e-mail, and get you off the phone. Not to mention, Ive been told by many a rep that the hot water heater extinguishes itself, if water is overheated, and that it must be my fault for setting the temp too hot. Baloney... Ive been told that the underside vent must be cleaned every few months, so that air flow is accurate. Makes no difference one way or the other. And recently, Ive been told by a rep, that my 40-yr-old house likely doesnt vent exhaust out through the roof properly. This product is inferior and unpredictable. Its great when it works, and the pilot light stays lit. God forbid it ever goes out though! It is next to impossible to relight. I have spent more money on service technicians attempting to repair/replace parts, than it would have cost to simply by a new hot water heater. I miss the old days, when it was easy to light a hot water heater: Strike a match, turn the gas on, and instant hot water. No muss, no fuss. Having owned many properties w/ hot water heaters over the years, I have never encountered such repeat problems, as with this product. Its simply not reliable, and not worth the $$$. Never again, will I buy a Craftmaster Product. And I had no clue that there was a Class Action Suit filed, and a settlement involved in these faulty units. Whirlpool/Craftmaster should have notified everyone, who purchased one of their units. Now Im stuck w/ a constantly broken unit, and zero recourse. I will never buy anything Whirlpool/Craftmaster again, as a result.

I filed a complaint late Oct. 4, 2011 about a problem I was having with one of my Whirlpool water heaters. Chris from Whirlpool emailed and phoned me twice within 12 hours! He was courteous and very helpful. He shipped the parts that I needed overnight. They came in this evening, I installed them and everything is working great! Thanks to Whirlpool and Chris, we now have hot water!

Home owner bought a whirlpool water heater from Lowes. After the first year, the pilot started going out frequently. Tenants were left with no hot water repeatedly over weekends, etc. Changed numerous thermo-couplers, cleaned the screen below, but it continued to happen. I’ve paid plumbers for several service calls, which amounts the cost in excess of the price of the water heater.

I purchased this Whirlpool washing machine in July 2009. The repairman just gave us a $1400 estimate for repairs due to failure of bearings. This is an energy efficient, expensive appliance that we expected to last for years and we feel that 2 1/2 years of service is unacceptable. We did not purchase an extended warranty and Whirlpool said they would help with the cost of parts - not labor. We cannot afford to repair a lemon and so purchased an LG front-loading washing machine today. Hopefully we will have a better experience with LG as we will not be purchasing any more Whirlpool appliances ever.

We purchased a Whirlpool hot water heater approximately 4-5 years ago and have had problems with the pilot staying lit. I contacted Whirlpool and their trouble shooting included doing a draft test (I am a teacher not a plumber) and removing the closet door that houses the unit. I am very frustrated by this entire ordeal and would like if they would replace the entire unit. At this point I dont want another Whirlpool product. The plumber made a service call at 12 noon and by 3:30 we had luke warm water and by 6:00 pm the water was ice cold! I will never recommend any Whirlpool products.

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

Works fast and quietly. Easy to set up. Get the geek squad coverage and clean the filter at least monthly.

I bought a whirlpool water heater at Lowes 4 months ago, and it has stopped working. I called the customer service number and was treated so unjust. I told them that I had just had it looked at by a plumber and he said that the water heater needed to be replaced, I told the whirlpool represented if what the plumber had just advise me. So I asked them if they could just replace it, the customer service representative told me I had to call another number to have their service people look at it and that wasnt for another 10 days. At which time I asked the representative what was I to do without hot water for 10 days. She told me that they could only schedule it that way. So Im here to tell you all please please please dont ever Buy anything from whirlpool because they will not back it up! I on the other hand just lost $500 and went out and bought a Rheem water heater instead.

I have been complaining since 2 months after I bought the Whirlpool Cabrio washer. It is the most expensive piece of junk I have ever bought. There is never enough water to thoroughly wash clothes. The clothes always tangle up. The UL comes on all the time because it is unleveled and clothes were so knotted up that I can’t get them out of the washing machine. I keep calling and complaining, but all I get from Whirlpool is that I need to sort my clothes better and not wash all pants together because the legs will get tangled. So, do I wash some of my dark paints with towels just to keep them from tangling up? I don’t think so. I paid $750.00 for this piece of **. It should wash a mink coat for that price. I keep checking websites in hopes that there is a recall on this thing. For sure, though, I will never buy another Whirlpool product after this purchase.

I call in to Customer Service to get someone to fix my washing machine because it wasnt working and when I called, I forgot to have my washing machine serial number at hand. The person on the other side told me that she cant wait for me to get the serial number more than 2 minutes and I ask myself, if they cant wait for me more than 2 minutes to get my serial number, then why should I wait a week to have someone fix my washing machine?

WTW8000BW0 washer - This is the worst washer I have ever brought. We bought a pair washer and dryer. The washer started making noise when it was in spin cycle so we called repairman. He came and said it would be better if got rid of it and bought something else. Said it would cost too much to fix and hes seen too many of these. The noise is so loud we close door on laundry room and we cant hear TV in front room. This is the worse junk we have ever brought. Whirlpool should be accountable for this.

Extremely disappointed in Whirlpool oven! Built new home and this was recommendation by BAC Appliance. The oven does not self-clean well at all, and my spills are minimal. Deposits between glass doors that cant be removed. Oven is barely cleaner than before I cleaned for full cycle. Oven suddenly shuts off for a short while and then restarts. Steam comes when using lower oven and removes finish on upper oven. I expected Whirlpool to have a quality product. Definitely not! BAC really had no answers for me.

My Whirlpool super capacity 465 started flaking out on the temperature and burned our dinner. I had a repairman over to repair which he did after about 3 hours of testing. Less than 6 months later it did the same thing. Overheating in the oven.

I purchased a dishwasher from Menards. It was a top of the line Whirlpool Dishwasher. We ordered new cabinets for a kitchen upgrade and when the cabinets arrived they were damaged during Thanksgiving holiday. We purchased the dishwasher and it sat in our garage until the second set of cabinets arrived in mid January.Once the GC installed the new cabinets we noticed a small dent in the front of the stainless steel dishwasher. I notified Whirlpool and they took my model and serial number. The supervisor April said there is nothing that I can do. You passed the 30 day cosmetic warranty. I explained the issue to her and she didnt seem to care.The dishwasher sat in the garage for 7-8 weeks. This is not the consumers fault. This company could of sent a service mechanic out and replaced the front panel. But she chose to ready some meaningless policy to me. I will never buy a Whirlpool product again, and I will tell everyone about the poor and unprofessional service that Whirlpool offers.

Whirlpool front loader duet washer WF9400SW01 - I bought this washer brand new in 2007. The rubber ring by the door started to grow mold after 2 years, the washer collects water after wash. Water was dripping down to the drum and sit there. If I forget to check and drain it by turning on in the rinse cycle, it wets the entire floor. And it sounds like a freight train after 4 yrs when it spins. My last washer lasted 20 years and it was a whirlpool top loader. Thought I might get that with this one.. but NOT.

We been having the same issues as all of the people that have consumed the water heater. We have replaced the pilot more than 3 times and other parts of this water heater! Well, we are a family of 9 and the only way we can shower is by heating up water like everyone that has the same issue.So I would never recommend this (Whirlpool) water heater to anyone!

Whirlpool is the manufacturer of most appliances including the Kenmore dishwasher. Your products are made horribly for the mother board to go out in 2 years is ridiculous. I purchased a stainless steel dishwasher from Sears in August of 2014. 2 weeks ago I received error codes E2 and F2. A technician came out and the mother board needs replaced because water got into it... its a dishwasher. The cost to fix $465. I paid $673. The sales person informed me that I should have purchased the extended warranty because the appliances now only last a few years. Seriously... fleecing of America. This is my last purchase from Sears. We have bought appliances for 30 years from Sears and this is the end. They could care less about customer service or their products. Apparently everything is now made by Whirlpool who will also be getting a review. Shame on you for making poor products.

I owned the Whirlpool washer for 13 months until it quit. Menards was no help with anything. I am going tomorrow to get to try my luck with Samsung.

WFW97HEDW, WGD95HEDW American made and equivalent to LG and Kenmore. Size fitted our space available. Price was a bit higher than the Korean models with similar or better features. We bought and returned three consecutive Whirlpool models from Sears. Though we never really got to put the dryers to the test, nor did they fail, the washers were of such a poor quality that they broke down within 1-2 weeks of installation. Eventually we switched to LG and have had no problems. When the Whirlpool fails it locks your clothes inside and to open and retrieve your clothes is just short of impossible. We really, really really wanted to buy the American made brand and we were willing to pay the premium to do so, but these washers were awful.

I love my Whirlpool refrigerator, its great. I have not had any major issues with this brand. I only wish that the freezer was made a little different. Im not a big fan of the side-by-side doors. I would much rather have the one with the freezer at the bottom and the fridge at the top...

I purchased a Whirlpool dishwasher and have had it repaired four times so far. Last time they replaced the main computer located in the door. I attempted to use the dishwasher tonight and it is completely dead once again. I usually have had good luck whirlpool appliances. After all these problems will no longer be using this brand. I contacted the store where I bought it from, Famous Tate. The first time it stopped working just a month after the manufacturers warranty ran out and they were absolutely no help. So in the future, I will no longer buy any type of Whirlpool appliances.

Our Whirlpool Cabrio washer is 2 years old and also sounds as if its a jet on the runway preparing for takeoff. The spin cycle started this about a month ago. It is so loud now. It is just SCARY. I am so angry! No recall??? seriously???!!! Rip-off. I will NEVER buy anything Whirlpool again!!!

I bought a Whirlpool Cabrio Top Load washing machine September of 2012. It has never cleaned the clothes well. For the last month the machine has a very loud spin cycle. I am very unhappy with this purchase and it is 2 months out of warranty. I emailed WHIRLPOOL and was told that all appliances have problems and wear out. WOW! It is 14 months old and has been used with care. I will never buy another Whirlpool product.

Bought this machine at Lowes as it was recommended by the salesperson. The machine broke down in 2 months due to a control module. Besides that, the clothes do not get clean! They come out with all the stains still on them. The water does not even get the clothes wet! And they smell. Called Whirlpool up and they sent out tech 2x and said there was nothing wrong. Went back to Lowes and they will not honor my claim to replace the unit. I now have to purchase a new machine since this one is useless. Never will I buy a Whirlpool again and dont you either!!!

This machine needs to go back to the engineering dept. There are too many engineering defects to mention. My Cabrio washer and dryer was delivered October 11th of 2017. It is just my husband and myself so laundry was scarce. I have been unhappy with the washer since the beginning and just recently decided to try and solve the problem. I contacted Whirlpool first and was told these machines have great reviews and nothing is wrong with them. When I started describing the flaws, there was one excuse after another and the person from Whirlpool blew me off. The flaws... all begin with not cleaning which is caused by design. The water level, even with the deep water setting, does not even cover the amount of clothes in a small load; the agitator is so small, there is no effect on agitating the clothes; even with using a SMALL amount of HD detergent, there is always soap residue on the clothes because of the lack of water; and last issue but not final is the load going off balance. The machine will walk all over and error codes according to the repairman need to be cleared so must call if it happened again. Well, the very next load it went off balance again. I did not call because I would have the repairman living with us and I am not willing to set up a bedroom for him or feed him. So, Whirlpool does not care if their product needs redesigning, they only care about selling their product and then the consumer is on their own. Basically the same train of thought from Best Buy where we purchased the machines. Best Buy would be happy to sell me another laundry set... per the store manager but that is all he could do. Will I purchase from Best Buy again... I think you know the answer to that. If they cannot stand behind a product they sell, then they can keep everything they sell, no more money coming from my checkbook to them ever again. Someone, whether the manufacturer or the retailer, should be willing to stand behind their product. But, no one cares. Bottomline, do not believe the ratings on the Cabrio washer. This machine has design flaws that cannot be corrected.

Whirlpool Cabrio Model WTW6500 - I ask all of you to stay away from the Whirlpool Cabrio sets. I have spent hundreds of dollars trying to fix my washer. I just spent $260 for a computer board. Now it stays on rinse cycle. So now I need the motor sensor harness which is another $90. Service call $80 x 2. So, now I am going to take the computer board back and get my 260 dollars back. For the cost of $400 to fix this washer. You can go and buy a new one for around $400. Then, Im going to the lawyers to file a class action suit against Whirlpool. So, owners; be looking in your mailboxes for a class action suit against Whirlpool for those who own the cabrio set. Im tired of having to deal with whirlpool customer service. Maybe, whirlpool should think of having their laundry made back in America.

My first time with Whirlpool (Always had GE) but at the suggestion of our builder, we went with Whirlpool and the stainless steel is horrendous. Nothing will clean it or make it look STAINLESS. My refrigerator, dishwasher, double oven, tall vent all look terrible no matter what I use! I have never had this problem before. Im embarrassed to have anyone go into my kitchen...

Whirlpool Gold appliances are junk!!! Our dishwasher just stopped working one day. It was about 2 years old. We tried all the troubleshooting ideas we found on the internet. Nothing worked. I had a 13 Year old working dishwasher when I bought this one. Sure wish I had left well enough alone. I think there should be a class action lawsuit against Whirlpool. I had also purchased a new electric range... It is constantly giving me an error message when I try to use the oven. We have to flip the breaker and that sometimes helps. I bought 4 of the Gold appliances... I’m holding my breath on the other 2. I thought I had done a good job researching before I bought. I remodeled my kitchen. It turns out that a company that I believed was reputable and worthy of my business are not.

I purchased a Whirlpool upright freezer from Sears 17 months ago and it stopped working. I find the warranty is only 12 months. I contacted Whirlpool and they left a message on my answering machine that they would not be allocating any funds for the repair of this 17 month old freezer. I spent in excess of $600.00 and I am highly disappointed. I would never buy another Whirlpool anything.

Whirpool Part #WPW10564292 refrigerator handle - I am a property manager who has 264 units. We have only been open for 1.5 years and have had to replace 30-40 door handles because they crack at the top where screws are. We tried calling Whirlpool Customer Service because obviously this is a defect and she said they looked in the system and didnt see any recall or issues. We also asked for a representative from Whirlpool to stop out so we could show them the issues and she said we have nobody in the area. We have 9 service requests outstanding that need a new refrigerator handle. On July 19th, we ordered 3 handles from our distributor and we were told theyre on back order until September 6th. When I called at the end of August to make sure we were on schedule with delivery, I was informed they are now on back order until November 5th. I just called our part rep. this morning and now they said the current part number does not exists and gave me the new part # W11026870, and they are on back order until mid or end of November. I am not going to keep quiet about this issue. We have paid $79.89 per handle on a refrigerator that is only a 1 to 2 years old appliance. I am requesting a returned call or email on what you are going to be able to do for us. This is not right or fair to a company that spent a large amount of money to have your appliances in 264 units.

Whirlpool microwave came with my new condo, and its as aesthetically pleasing as it is functional. Very easy to use, sounds are not annoying (as my last microwave was) and heats food quickly and evenly, as needed.

We purchased a Whirlpool Cabrio washer & dryer in 2005. After CONTINUED issues with the washer during & after extended warranty, we decided to replace it in 2011. Im not a fan of mismatched sets, so we also replaced the the dryer. After researching the WP Cabrio, we assumed that model was a fluke and reluctantly replaced with the Whirlpool Duet Set. Nearing our warranty expiration, our new washer has stalled for the 3rd time. Sears customer service has been absolutely dreadful since day 1. Original delivery was scheduled incorrectly, so we ended up picking it up. We then spent the next 3 months trying to get our military discount credited back. They promised at time of purchase it would be credited automatically. After 2 hours wasted on the phone today, we are still without a working washer.. or even a date as to when it will be repaired. I was appalled at the condescending phone conversation I had with Sears rep. When service showed up last week, he knew immediately that 1 part was missing. He replaced the other 2 parts, and assured me hed rush the 3rd part and come back out today. Had I not called, we would be receiving a phone call on Friday to say our part was backordered and not available until June. After a long and frustrating conversation, I was told we could have a courtesy $25 max a week for laundry, with a max of $100 per year. I was also told that it wasnt Sears fault the part wasnt ordered when I called the 1st time, and so the 21 day wait period didnt start until the service man caught the mistake. If we hit 21 days from that date, they supposedly will do some sort of swap. I have confirmed with WP that the part is on back order, and frankly they didnt do anything either.. but the rep was much more apologetic. They couldnt do much because our warranty is through Sears and not them directly. My great niece is coming in 2 weeks for the 1st time since she was put on hospice, and I will be without a washer to clean her cloth diapers. She is on a very specific diet and has a feeding tube, so I will have to waste time hand washing clothes instead of savoring her visit. I will never shop at SEARS again. They have continued to go downhill with all the corporate changes. I left the corporate world a couple of years ago, and I can tell you that Sears doesnt take no or sorry from their vendors. Im very upset and intend to take this to another level, which I rarely do.

We were looking for stainless steel and this model was that. This model has lots of presets which we like. We lucked out and got it on sale and were able to get features of a more expensive model for a lesser price. The only downside is getting the turntable back in when you clean it. One of the things I wish it had was a way use the timer for foods cooking in the microwave plus use the timer separately for timing food you arent cooking in the microwave, but will be part of the meal. Also, the defrost options could be clearer!

Ive had other brands of washers and dryers and I must say I always return to Whirlpool. They are well made and do what they are supposed to. Never had problems. My last set of Whirlpool was about 12 years old. Great product.

Ice machine went out right after the year warranty was up. Convenient right? We called a hometown tech to come out and look at the water valve. He was unable to locate it, so we called Whirlpool service. After waiting 30 mins, they told us they cant tell us where to locate it for safety reasons, and if we wanted anything done to the refrigerator, we needed to pay a tech to come see it. EXTREMELY RUDE!!! I would NOT recommend whirlpool ANYTHING.

Ive only had my matching set of Duet Washer and dryer for 14 months when the noise got so bad that we could wash when we were at home. We would start a load and leave. I bought the Repair plus one and Whirlpool and said they would give me $599.00 to replace my machine. I cant buy one for $599.99. They said they replace when I purchased the warranty, but now Im told at 75% of its value because its between 1-5 years old. Now, Ive paid $300.00 for the warranty and will half to spend another $200.00 to replace it. Im frustrated and disgusted with Whirlpool.

We live in Hawaii, so the price for our stacking closet size unit was exorbitant. It was over $1,000.00. It is small so the size of loads are small too. We bought one that is supposed to sense the load size and deliver the correct amount of water. It does NOT do this. Reviews online show complaints of this same nature. It does clean well but we have to do very small loads to get that.

I went to get ice from my Whirlpool Gold refrigerator, model GB2FHDXWS, and found it was melted. Light and fans were working. I had to throw out all that was in the freezer drawer. I called Lowes service and reported that our four-month old refrigerator wasnt working. They sent a food claim number and set up a service call. Then, the lady said to unplug it and plug it back in. We had since cleaned it out. I unplugged it and plugged after a minute and it came back on. The Ace service guy called to confirm his schedule. After hearing that it is running again, he said they are computer controlled and unplugging it and plugging it back in reboots it, as you might reboot locked up PC. He also said that since it is now running, Whirlpool wont stand behind a service call. He said wait until it does it again. Now thats just jim-dandy. We have an expensive new Whirlpool Gold refrigerator that has computer controlling that cant be trusted as the control may or may not lock up in the future spoiling the stored food.

Model #RF262LXSQ Serial #RT2031953 - I purchased this appliance from Lowes approximately 6 years ago. Last week, I was heating soup and about 5 minutes after I placed the pot on the stove on medium, I heard a large pop and then several cracking noises. When I entered my kitchen, I found the burner flaming red, and when I tried to remove the pot, it was stuck. I immediately turned the burner off and after a few minutes, when it began to cool, was able to remove the pot. What I found was the glass top had melted and blistered and was cracked from front to the back of the stove. Although Lowes was not able to help me, they suggested that I contact you as they had never heard of this happening before. Not only am I dissatisfied that a stove should last many years past this purchase, I am inconvenienced until another stove can be delivered. I believe this to be a factory malfunction of the stove and request a credit for my purchase.

The lid stopped locking just over one year after I purchased a Whirlpool Cabrio top load washer, which disabled the washer from washing. After investigating, it seems the electronic control board needs to be replaced, which will cost $400 just for the part. I have a large family, including a disabled child, and a washing machine is mandatory necessity that I cant afford to replace after only one year.

I bought my refrigerator model GX5FHDXVQ0 in 2010 and after this short amount of time, the control board went out. My repair cost was $446.05 to have it repaired. The refrigerator cost over $2,000 and to have to spend nearly $500 on repairs after only 2 years seems way beyond reasonable. I have Whirlpool appliances - washer, dryer and dishwasher - in my home and thought it was a very reliable name. I am very unhappy after reading customer complaints about the very same thing happening to them. I can also see that the company Whirlpool is not very concerned with customer complaints. I find this very disappointing. I will not recommend their products anymore nor will I purchase any Whirlpool products.

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

Having multiple apartments I have some experience with water heaters, with that being said, old school water heaters would last 30 years with basically no maintenance. Since those old, manual no BS flashing light codes were replaced with Whirlpool brand, I see constant problems. Honeywell valve/motherboards was the worst thing that could have been put on any equipment. More or less they all failed within few months past warranty expiration date. Replacement part is cost almost half of what brand new product costs. When called customer service, they are aware of said problem but will not help, or recall above product. There are plenty of videos and forums of people complaining about the same issue. Being poorly treated by customer service, I know that I will no longer be spending my money on whirlpool brand. 3 years off of the water heater is a joke.

Whirlpool Double wall-mounted Oven model#WOD51EC7AW05. Have had nothing but problems (at least 7 problems). The 1st one is a potential fire hazard. Porcelain/enamel shattered on bottom interior panel of BOTH ovens in less than 60 days (exposing underlying metal to rust). Cracked in an odd stress-pattern that indicates the metal expanded during heating, and the porcelain finish did not tolerate the expansion. The lower oven had only been used 2X before I noticed the fracture pattern. Obviously faulty design; a manufacturers defect. Whirlpool claims it is cosmetic damage and when porcelain eventually flakes off, they will send me touch-up paint. (If I dent the outside of an appliance with my wheelchair, thats cosmetic damage. Its a manufacturers defect if the damage happens during normal operation. The appliance damaged itself, not the user.)The preheat function does not work on either oven. The oven indicates it is 350-degrees, when it is actually 125-degrees. Repairman says this is normal; ignore the indicator and navigate by store-bought thermometers”. The temperature can vary 50 degrees on either side of the actual setting (thats a 100 degree range!). Between the faulty preheat and the wide range in temperature, it makes it very hard to bake bread or cake.The rest are annoying problems: The timer is a single “beep” (not even very loud), followed by another single beep every minute. This is not much help if you are folding laundry while the cookies bake. The windows have so many dots on them theyre not clear enough to see how the food is cooking (or read the store-bought thermometers) without opening the doors. The oven produces a lot of steam that fogs up the windows (Ive never had this happen, and Im past the half century point). The exhaust fan is loud and it blows hot air into the drawer under the oven (another potential fire hazard). Dont buy this oven. It has several design flaws and Whirlpool does not stand behind their product.

I just bought a house that has one of these ranges, and it was getting the F2 message. I found the problem. There is NO ventilation behind the electronic control so when the oven heats up, the control board gets too hot and throws the F2 code. That would indicate a bad temp sensor or bad board, but really its the heat shield on the back. Ive removed the metal plate from behind the control panel and it works fine now. Im considering drilling some vent holes and adding some insulation behind the control.

I purchased a washer and dryer set, the Cabrio Platinum Series WTW8500BRO, about 3 years ago. I had a UL code come up a year ago and the machine was serviced and all was back to normal. Then only 9 months later it started acting up again. This time it sounds like an airplane taking off and there is a black spatter leaking from underneath, also the lid lock stopped engaging. I started to look up the error code for the lid lock and while reviewing that issue it was an easy fix, however, the noise and black spatter issue led me to tons of horrible reviews about this product. It is a bearing/tub/shaft issue that is going to cost me $500 to fix. First off I did not pay cash for this set, I rented it for 3 years and paid twice what it’s worth, around $4,000. Stupid on my part but I couldn’t afford it the other way. Weekly payments were easier. Now I am scared to fix this product because of all the reviews I’ve seen from other consumers. I haven’t had the other issues like dirty clothes, not enough water, high cycle times because they all start with a high number but after it configured the load the time shrinks, but this major issue about the bearings, they say I have to replace the entire tub assembly which is half the cost of the unit. So stupid and I cannot believe Whirlpool is getting away with this crap. Please please please inform me about any lawsuits. I will gladly participate in that. They should be held accountable for such a worthless piece of junk. Like I said I am now afraid to fix this machine because from what I’m reading, more than likely it will only last a short time.

Whirlpool duet - This washing machine is absolutely horrible!!! I pull clothes out and they are tore up! We have replaced parts that we were told could be causing the damage and its the same thing! I am very unhappy! Ill be calling Whirlpool again but Ill probably get the same runaround - oh we are very sorry we dont have any known issues with that machine. Clearly when you look online it is a very known issue!! I doubt all of these people lied about calling!!

Remember the old movie classic Network, with the line, Im mad as hell and Im not going to take it anymore? Well, that is me and my new self-cleaning Whirlpool ranges that requires a manual cleaning kit (provided by Whirlpool after my purchase). I am angry enough that I have approached an attorney and I hope that if you have your own story about an AquaLift fail, you will include it on my website **. Thanks...

Purchased the machine in 2008 for $800. I did not have any problems (wash 3-4 loads/week), pleased with the washing until July 2015 when the machine was spinning out of control and the machine moved approx. 1 foot across the floor (thank goodness I did not have it on a pedestal as it may have tipped over). I canceled the run. This was a fine washables load of 5 sweaters placed on a medium spin.Scheduled the Whirlpool authorized service tech to come out and fix. He indicated there is extensive repair required and would cost approx. $1800. And indicated he has seen this failure before and it is due to the plastic parts inside. Also, he has seen these washers last about 5-7 years before replacement. Wow, last washer I had was a Maytag and it lasted 15 years costing 1/3 the price of the Whirlpool Duet. Now perplexed on what to buy, called Whirlpool Customer Experience Center to register my complaint and asked if there were any updates to the product that would avoid this failure. The center indicated there are updates but they are confidential and did not know if this failure was addressed.

I call them. Lowe's gave me #. Spoke to man there at CS. He took care of me. I was a Lowe's within 30 mins. Gave them PO. Home within 45 mins. Whirlpool you the best in Johnson city TN. You're just like Lowe's. I pay for Whirlpool because you make it. Thanks for all you do. The best. #1.

My 15 year old front loader quit working and was going to cost more to repair than we thought was worth it. So, we went shopping at Home Depot and based on discussions with salespeople ended up with the Whirlpool cabrio toploader. What a mistake. I am so disgusted with this washer I dont even know where to start. If there was any way we could return it we would do so. The clothes come out wrinkled, twisted, absolutely covered in pet hair and detergent and fabric softener residue. Yes, Im using HE detergent, in the correct amounts. Yes, Ive read the manual front to back. Yes, Ive tried all the troubleshooting suggestions. No, they dont make a damn bit of difference.I would give anything to have my old front loader back. It was a great little machine that did a wonderful job of cleaning our laundry. Pet hair was washed off, I could lay things out to dry and they werent all wrinkly and did not require ironing. Just about everything that comes out of this cabrio machine that I lay to dry needs to be ironed before it can be worn. It is just a horrible, horrible machine and Whirlpool should be ashamed of themselves for foisting this off on unsuspecting consumers.

I love my stove and all of its features. My stove is easy to clean and I Love the self cleaning oven. I have a flat top so that helps when it comes to cleaning, not to mention it makes cooking a breeze. I love all the push buttons and how smart my stove is. I highly recommend my Whirlpool to anyone looking for a great appliance.

I bought a Whirlpool Gold refrigerator in 2010 from Lowes. Within months it had a Freon leak and Lowes had to replace it. I had bought the extended warranty. In 2011 a part had to be replaced twice due to excessive noise. Then the freezer got frost buildup on a coil in 2012 and again in 2014. I called Whirlpool and asked if they would pay for my next 3 year warranty. They said no, it was my responsibility after the first year. I would never buy a Whirlpool product . Do research, Whirlpool makes several brands.

I bought the Whirlpool Cabrio washer and dryer combo with max load capacity for comforters. This is the biggest set of junk ever. Where to start? There are so many issues, starting with the fact that nothing comes clean, no matter if I even put one small item in it at a time! The fabric softener dispenser is a joke. It runs straight through into your unwashed clothes before the cycle even begins. The dryer never gets the clothes dry on the first cycle. I find that I will rewash the same load of laundry 2 or 3 times and still not be clean and then dry same load 2 or 3 times. I wish Whirlpool had these shoved up their **! Never again will I buy anything by Whirlpool!

From the day I bought the refrigerator the icemaker has not worked. I have had a estimation of service calls (8) and nobody seems to be able to fix it. Whirlpool mailed me a new icemaker and still the exact problem; water and ice works but the unit still will not cube or crush ice; which by the way is the reason I bought a new refrigerator. My thoughts are I bought a lemon and the entire fridge needs to be replaced.

It has plenty of room. The compartments within the refrigerator are well organized. There is plenty of room in the freezer. Have had this for about eight years and going strong.

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

I purchased a new Whirlpool stove in Feb 2020. First off the oven was not calibrated right and Whirlpool wanted us to do all these tests to see what the problem was. Finally, after purchasing an oven thermometer I finally got my ducks in a row and called them back to which they finally sent out a repairman. Now after almost finishing supper last night the whole cooktop stopped working. It is going to take a week to get someone out to fix it. Also, we have to purchase an extended warranty for our Whirlpool refrigerator every year because it always needs something fixed. Our Whirlpool washer has been on the blink for quite some time (no warranty) and cant afford to get it fixed. When talking to someone at Whirlpool it appears they have no compassion. I guess it is because they are just paid employees. My recommendation is to look into other products before purchasing. Do your homework.

Whirlpool dishwasher Wdt790slym1 - This is the worst dishwasher I have ever bought. The top rack assembly is made of all plastic and started falling apart within 13 months of purchase. I have had to order the same replacement parts numerous times and have reached the end of my patience. Buyer beware!!

This dishwasher was a mere 2.2 years old, installed by Lowes-hired technician and the part will cost $168 through Whirlpool, plus labor on both first visit and installation visit. I would not advise to purchase this or similar product from Whirlpool. What really makes me upset is that I learned from customer service that this unit was made in the USA.

I purchased an extended warranty with my product purchase and only a year and a half into using this brand washer the lid broke on one side at the hinge, it looked really rusty and like others I thought I was making a very decent purchase because all of my previous appliances were Whirlpool so figured Id keep up with the brand. Sad to say that was the worst decision I could have ever made for 13/1400 dollars for a washer with a light inside. Never again. They wouldnt even keep up the warranty because they said it was too expensive to repair it. Whirlpool is very bad for business...

Had the fridge 5 1/2 years. Freezer quit working was told by 2 different repairmen it would cost $800 to repair. Called Whirlpool, was on hold 45 minutes, literally, both times I called. They could not help me. Called the corporate complaint line. The man I talked to was such a smart **! I finally said I cannot believe you are talking to me like this, I have bought Whirlpool for 35 years. He backed off slightly. Still couldnt help me. BTW, I LOVE my new Samsung refrigerator! Will NEVER buy Whirlpool again.

I bought a Whirlpool refrigerator about 1 1/2 years ago. Mechanically it works fine, but many places on the outside are showing small rust, circular rust spots. Looks like the refrigerator has the measles. I dont think ordinary paint will cure the problem since it looks like the rust is coming through from the inside of the door. Any ideas as to what will cure the appearance and keep the rust hidden????