I purchased a Whirlpool dryer Cabrio (model # WED7300XWO and serial # M03028918), which has had several issues. We had to replace the felt around the dryer tube twice, replaced the dryer tub itself twice, we had the air flow stop, and now the heat has stopped. Thank goodness I purchased an extended warranty, otherwise who knows what these repairs would have cost. I think I got a lemon. I have had multiple repairs, and days of not being able to use our dryer.

What a piece of expensive junk! Do not buy it, does not clean clothes well, lid broke, lock broke, now it just wont start. Parts are super expensive. Next one I buy will be a basic washer, forget all the bells and whistles!!

I love this stove! It is nearly perfect. I wish it was easier to clean the glasstop, but I imagine that comes with any glasstop stove. The stove is easy to use, and I love the cooktime option. My only complaint is that the timer is very quiet, and when it is a timer while something is cooking, it only beeps once. If its a timer when nothing is cooking then it will go off repeatedly until you turn off the timer.

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

The washer (Cabrio WTW7800XWO) was less than 2 years old and we had a motor go out, so we paid a repairman to come out and repair the machine. The total cost was over $300. Now 2 months later, we get another code on the machine and Whirlpool says, We are sorry but there is nothing we can do, but if you would like to pay $219, we can get a repairman out there to check out the machine and repair it. Theyre also giving the machine an additional year warranty. Shortly after that, I noticed the lid was not staying up when I opened to put clothes in it to wash. So since I was wondering what was happening, I looked at the lid and to my surprise, the springs that hold the door up when open are built into the plastic lid cover that has a see-through glass on it. Right where the springs are located, it must be a stress point and the plastic lid has since cracked and is almost about to break off. I am now in the process of ordering another lid and Whirlpool offered to sell me a lid for $226 but I think I shall buy it from someone else as I dont want to put any more money into Whirlpools pockets. We paid over $1000 when we bought this machine. Now it is about 2.5 years old. I hope there is a class action lawsuit on Whirlpool as I will definitely join in if there is. This company needs to go out of business if they continue to sell machines like this that have so many problems especially when they are less than 2.5 years old. Goodbye Whirlpool. You have lost many more customers as I shall be letting everyone I know about all the problems and complaints about this machine.

The American Standard 95% 2 stage variable furnace is by far my favorite furnace to install. I know exactly what to expect from this furnace and I have had zero factory issues with this model. Outside of making a few sheet metal transitions this American Standard standard 95% furnace was very easy to install as well. And like the 2 stage variable … no factory issues.

Problem of refrigerator is working good for a few days, then the freezer is all melted down for a few days, then back to working good again. Model: FD2560HES. Serviced on and by: 7/16/2015 - ** - told me the controller board is bad, need to order part. 7/23/2015 - ** - replaced the controller board. Resulting same problem. NOTE, which means my old controller board is as good as the new one. 7/30/2015 - ** - opened the freezer, back of refrigerator, told me the compressor is no good, gave me an estimate of total cost $817.86. I did not accept the proposal, and I did not agree the compressor is no good. I called and scheduled for service after and scheduled to have service on 8/4/2015. Then got called from the office, said, Cant come on 8/4/2015 and told me I have to pay the $95.00 first visit. So I called and spoke to the manager, then scheduled for next service.8/13/2015 - ** - when he came, the refrigerator is working fine. He said, Cant diagnosis the refrigerator, told me to call for service when it is not working. He said the compressor is good. 8/15/2015, early morning the freezer is all melted. I called, been told cant service the same day. 8/17/2015 I called the office (1-888-717-9322), requested to talk to the manager, promised to call me back. By this date 8/28/2015, still no call back from the manager. They are located in Michigan. I was told the local office address is: 9582 Katella Ave., Anaheim, CA 92804.

I purchased a Whirlpool top load 8500 washing machine from LOWEs two years ago. I noticed that the clothes were not getting wet, clean, were coming out covered in lint, soap film and stained. It is misleading to call it a HE washer since I have to wash each load 3 - 4.5 hours. It is NOT energy efficient if you have to wash each load of clothes 3 times with a rinse. I have tried all of the tricks - changing soaps, labeling the wash as bulky, wetting the clothes to add weight... Washing clothes should not be this complicated. The clothes are sorted appropriately and washed in the right temperature. I do not understand what is staining the clothes. I put new white towels in and they come out stained (see photo)? Lowes sent out a repairman who said the machine would never clean the clothes since there was not enough water in the washing machine to wash the clothes. I tried to return the washer to Lowes but they said it was past the 30 days. Unfortunately, I purchased the appliances on a Lowes credit card so there was no recourse. I then contacted Whirlpool and was put on hold and transferred to various people before I gave up.

We purchased this Whirlpool washer 5640XW3 from Lowes. It doesnt clean the clothes. Even if I run them through a second wash cycle, the clothes are still not clean. Called Whirlpool and they said nothing is wrong with it. I use HE detergent and load clothes around the agitator as directed in the manual. Still, clothes are not clean.

2 loads of clothes and it is broke. I tried to call Whirlpool to no avail. So I called Costco where I bought this machine. They at least talked to me. Promise to get a hold of me tomorrow. Brand new (2 days old) and this happened. Didnt even finish the second load.

We purchased 3 Whirlpool Gold appliances, fridge, range and over-the-range microwave in 4/2011. Since that time, the fridge needed repair, the microwave door had to be replaced and the range had to be repaired. Now the heating element on the microwave went and Whirlpool will not fix the problem. We purchased the extended warranty through Whirlpool and they are saying it is not worth fixing. We paid $470.00 plus tax and install and now all they are giving us is $348.00. Since we have had repeated problems with these appliances, why not just fix the problem or replace the microwave??? What Whirlpool customer service told me was that would be options for us if we did not purchase their extended warranty. Tell me, is that fair? The cost to repair the microwave was $388.00 and they are giving us $348.00 - do you not think for the $40.00 difference, it would be worth to spend it to keep us happy. We will never purchase another Whirlpool product again and will tell everyone we know not to buy their products.

In 2011, I bought in Croatia, for the start, 2 washers (model 3LCHW9100WQ) and 1 dryer (model 3LCED9100WQ) and opened the first self-service laundry in Pula, Croatia. Since the beginning, I had problems with the gum (black). After the washing cycles, you could see black lines on the laundry. Whirlpool Croatia denied that the gum can be the cause. After two months, they gave me new gums, but the problem still exists. After 5 months of work, the first malfunction on the washers started. The biggest problem is that it took and still takes them up to a month to repair them. And these problems I have ever since. Also, the error codes never showed the correct malfunction code. In global, if I take that I have these washers and dryer for about a year, they were out of function for more than 3 months. The warranty expired in April 2012. On these reasons, I cannot recommend any product of Whirlpool, and I have to change to another company to buy more washers and dryers.

The refrigerator is a Whirlpool Model #GSC25C6EYW0. We purchased it on September 17, 2013. So far we had to fix the ice maker, the drawer broke, the refrigerator cools unevenly. They tried to fix it but cant. Therefore, I cannot put tall things on the top shelf. Now it is not cooling and I have to repair or replace it.

I have had my water heater for 5 years and the repair is going to be close to $300.00! Whirlpool offered to send me the part and if I want hot water tomorrow I can pay $30.00 for shipping! $10.00 for standard ground! My other water heater was builder grade and lasted 12 years! Go figure.

I bought one of the top of the line Maytag washers and was very disappointed. It only lasted about 5 years and had to be replaced. The dryer I bought at the same time is still working. It is 15 years old.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

I would like to share whirlpools lack of ownership for parts they knew were faulty that caused significant damage to my floor. Its absolutely horrendous that one would purchase the highest end dishwasher they offer (all highest end appliances in 3 homes so far) and the company is only willing to cover the replacement of the part. Its a horrible way to run a company. I hope that my review will warn prospective customers to stay away from a company who is only willing to take your cash at purchase (charging an arm and a leg no less) and not care about any repercussions after the fact. I hope they enjoy our 15k, because it will be the last penny they get from us.

I purchased this set in November 2013, it is now October 2014. I made the same mistake as many others have made (according to the reviews that I have read on this site). Because I have owned Whirlpool brand appliances before - including washers/dryers - I assumed this new HE machine set would be every bit as good + quality. Unfortunately, I did not do my homework!Everyone is right - this Cabrio HE washer/dryer combo is nothing more than expensive JUNK!. My complaints are all the same as everyone elses: the clothes do not get clean, soap residue remains on clothes, the clothes even have parts of the articles come out of the wash cycle dry not even having had the water touch the articles in areas! The dryer has been repaired once already for a dryer sensor problem & overheating, now both the washer & dryer are making some ridiculous hum-drum noises! Even with the extended warranty that I purchased, I can see the loop holes built into it; theyve got me over a barrel with the nonsense mumble-jumble tactics of having to qualify for adequate service repairs for replacement of parts (3x on each machine) they cant find, before even attempting to negotiate a buyout that will never happen. Never again, Whirlpool anything!!!

Less than 3.5 years use on a 2015 Whirlpool dishwasher...total costs to repair would be $600. This just to let other know. Whirlpool did nothing for me when the same issue showed 15 months after purchase and again 18 months later. Absolutely horrible experience. I dont want them to contact me and I post this as a warning to others. They just want to sell you high priced service contracts. Terrible dishwasher and even worse customer service.

Ive replaced my ceramic stove top twice. First time it was my fault, I dropped something on it. But last week I was the only one home, stove was off and I wasnt even in the room. I heard a bang, went and looked around. Saw nothing. But when I went to prepare dinner.... shock, the entire stove surface was shattered!!! Now at over $600.00 to replace it I AM NOT HAPPY!!!

I purchased a new water heater in August 2013. The pilot light started going out in October/November of 2013. After calling the Tech Support phone number, (877) 817-6750, I was advised to clean the burner screen. First this is very difficult to do because the burner screen is underneath the water heater and almost impossible to access. Second the closet the water heater is in did not show any signs of debris that could clog the burner screen. I did as they recommended. Several calls, and several weeks later, they finally authorized a technician to come and service water heater. He performed a cleaning even though he couldnt find anything to clean; and he replaced the control module. The new control module worked through the spring and summer seasons and then I started having issues again in the fall, late October. Started calling the same phone number and was told again to clean the burner screen. I convinced them to send out the technician again. The A and E Factory technician came out and only cleaned the burner screen and left before I had a chance to get home. This happened several times and I called Whirlpool every time. The next A and E technician told me to try changing out the draft vent chimney to a different size, which I did. Problem happened Again! I finally asked for another plumber and they sent me 3 names of their authorized plumbers. I called Phil, Philco Plumbing. He told me that I needed to have more ventilation, so I added more ventilation, even though I later found documentation stating I already had more than what was required by the manufacturer. Again, a week later, started having problems. Call back and asked to have my personal plumber come out. This time the rep told me that I have always been free to choose any plumber I wish (why wasnt I given that option the first 10 times I called?). My plumber came out and replaced the control module and the thermocouple, but wasnt convinced that these were faulty parts, he honestly couldnt figure out why I am having this problem, but it was worth a try. That lasted about 1 week and now I am having the problem again!!Whirlpool will FINALLY authorize a new water heater, but they will not authorize installation for the new water heater. I have already spent money on recommended repairs that have not worked. I have taken 15+ hours off of work to watch plumbers do nothing that has rectified my problems. And now Whirlpool wants me to deal with installing the unit myself, OR pay to have it installed! They say they wont cover installation because I purchased it more than 1 year ago. They seem to be missing the fact that I have had trouble with it the ENTIRE time I have owned it!This Flame lock system is garbage. I found on Consumer Affairs that a few years ago a class-action lawsuit settled, dealing with the same issues. I think it is time for another round! I KNOW that I am not the only one dealing with this problem because the plumbers I had out all had similar complaints from many of their clients. Whirlpool wont fess up to the problem, but the problem is real.

I chose a Kitchen Aid Stainless Steel, Counter Depth Refrigerator from Lowe’s in early February, 2018. (Model #KRFC300ESS) At the time KA was recommended as the best choice. 1) Within a month there were numerous rust stains on the French door and that needed to be replaced and 2) There is the Damper Control unit which makes a intolerable noise until you replace this motor. This noise then returns....about every three months. Plan on paying just under $200 every year for the life of the refrigerator (at average of 14 years= $2,800!). We have had servicemen to our home now 4 times since our 2/7/18 delivery. A local retailer just rated Appliance Brands in 2020 for reliability and the amount of times serviced and found Kitchen Aid to be 10 of the 10 listed. My recommendation would be to try another brand. This one creates a money pit. :(

I hate this machine. I stress whenever I have to do laundry. The worse machine I ever owned. Stay away from it. It is a total rip off... I wanted to replace my front loader machine with a top loader. Based on good reviews at the time I purchased the Cabrio. Nothing gets clean. The detergent stays on the clothes and unless I use the Bulk senor. Otherwise I get horrible white marks on all the dark clothes. I cant even get the marks off with a wet rag. So washing only a few items I have to use Bulk. The sound is so bad from the machine, my dog runs in the closet and shakes. I feel so bad for her. How can a popular name like Whirlpool make such an inferior product? They dont even stand behind it. Customer service stinks. Never will I buy a Whirlpool product again. Now, I am trying to save up to buy a new machine. Shame on you Whirlpool.

My new Tridel Condo came with a brand new Whirlpool washer and dryer and the washer has not been working well since the beginning. After several service calls the repairman finally gave up and now were getting a new replacement. However its been a nightmare working with them trying to get this washer replaced. The Whirlpool delivery team and the service team cant seem to coordinate a time together for the replacement. We had to make a first appointment for the service guy to uninstall the old unit, the second appt for the delivery guy to drop off the new unit and pick up the old and a 3rd appt to install the new unit. Each appt has a 4 hour wait window. This is their standard procedure, which is totally inconvenient to customers. To make matter worse, the delivery guy came too early for a condo delivery (before 9 AM) and told us he will be back the next day. And he didnt show up. It looks like now we actually have to have 5 appts (including the 2 missed appts by their delivery guy) to have the washer replaced. All the time I wasted waiting for this delivery is worth more than the washer itself. What would be 4 hours X 5 appts = 20 hours. This is the worst customer experience ever. After 3 months of constantly calling Whirlpool and still no washer. Whirlpool needs to hire some competent people who actually care about servicing their customers.

Whirlpool Gas Range WFG540H0es - Purchased 2 months ago. After 2 weeks there was a spill. The black burner caps are powder coated. After cooling we washed it with dish detergent & a sponge. The powder coating came off. Called the company. They replaced burner caps. Last week there was a spill and it stained the burner bases which are powder coated in a silver color. We tried 409 cleaner, Windex, dish detergent with a sponge. Could NOT get the stain out started removing powder coating. Called the company they ONLY guarantee cosmetic appearance 30 days. They wanted $139.00 for a new set of burner bases. I am going to go back to Lowes & see if we can return this Whirlpool range.

This machine always leaves me questioning if its going to finish the cycle. It goes thru all kinds of spastic sounds in order to advance to the next step. I learned I cannot presoak a load more than 10 minutes before the machine empties ON ITS OWN! I just dont trust the machine and would not buy again.

We purchased Whirlpool Cabrio 8.8 cubic ft Electric Dryer with Steam Cycles (Chrome Shadow) Energy Star Model WED8500DC and Whirlpool Cabrio 5.3 cubic ft High-Efficiency Top-Load Washer with Steam Cycle Model WTW8500DC and have had no issues at all, only personal issues, such as me being 54 tall and cant reach the bottom of the washer tub to take out all my clothes, so my husband helps, he is 5 9 tall and can reach in it fine, so we do laundry together now! We have washed very small loads to large loads such as, bedding sets without any issues at all. We love the gorgeous look as well. We have only owned these since November 2015... so about 4 months now, but we are completely satisfied! We have always owned Whirlpool, our old set we bought in 1998 and they finally gave out in 2015! Whirlpool for life for us!

My water heater stopped lighting. I found out that I needed to replace the thermocouple. I wasnt able to find the right one anywhere. I called whirlpool and they sent me the parts I needed totally free. I was so happy to get it in the mail the next day cause I have gone 1 week without hot water. I went to work and got a call that my kids are dizzy and throwing up. The house had filled with carbon monoxide. The only thing that saved us was the fact that my AC unit for the downstairs was broken, so it could spread the carbon monoxide to where we slept. The gas company said that we most definitely would have not woken up. I now have a notice for hazardous material on my house. I thought we all just caught the flu. I had no idea that we were being poisoned because of this damn water heater. I could scream. Im a single mother with four kids and a sick mother and cannot afford a plumber for this madness.

We purchased what we thought was a top of the line, high quality washer and dryer, Whirlpool WTW7800XWO approximately a year and a half ago. It has the glass top with a plastic frame, which has just cracked at the hinge location. I went online to read reviews and then called the Whirlpool Customer Service number, 1-800-253-1301 for assistance. I was thinking after reading the reviews that this should be a simple recall type discussion; however, I got completely the opposite! I asked if this was a common problem and the response I got was, Well, we have had people sit on them, stand on them and fall on them, so they have broken for all kinds of reasons! I was flabbergasted! Of course, I was then told it was out of warranty but he could sell me a new one for $219.38 plus tax plus shipping for a grand total of $261.17. It is clear that Whirlpool does not allow their employees access to the complaint line. This must be kept top secret because the only people that know are the thousands of people that have called in to complain, and once you listen to a complaint, you are fired so you cant hear another one and figure out this is a common problem the consumers are getting screwed on! Every appliance in my house is a Whirlpool and the first to go was the washer after 11 years, which is when we bought this new set. When we have to replace the rest, dishwasher, fridge, etc., it will definitely not be Whirlpool unless they do something about known problems and help the consumer out, especially in an economy like this because bare minimum word of mouth advertising is the worst kind to have! I will now see if someone from Whirlpool reaches out to me or not! In the meantime, I will go to Change.org and sign the petition, never again to purchase a Whirlpool product!

I have had no trouble with this ref. There is absolutely nothing bad I can say about it. Once or twice something has fallen behind the drawers/ranks in the freezer.

We purchased the Cabrio Agi top loading washing machine in 2011 (3 years ago). After 2 years it started leaking from the plastic drum (Bearings?). Luckily we have it in the basement on concrete floor, so there was no damage, just frustration. This was poor purchase on our part. We should have searched for more reviews. The wash time is ridiculous; it is too long, an average of 50 minutes per load. I dont know about how clean the clothes were, I guess they were OK. I didnt notice a smell, or them looking dingy. The Cabrio is a piece of junk if the bearings went out after 2 years?? We just purchased a heavy duty Speed Queen, top loading, agitator washer. My wife loves this, its like the old Maytag we had. They told us they wont be selling these washers after next year. Buy them while you can. The Cabrio is headed to scrap yard.

We bought a brand new basic refrigerator, freezer on top, no frills, no ice maker, no water dispenser (model #WRT359SFYB) in Dec. 2011. For months, things on the bottom shelf of the fridge would freeze. The more we turn the control dial down, the more things would freeze. Finally, everything stopped freezing, including everything in the freezer. After having to throw everything out, we called for service. One year and 4 months out from our purchase date and without an extended warranty, we were offered no help. The repairman said that we had a leak as a result of poor manufacturing and there was no refrigerant left. He filled it but said he needed to check with Whirlpool to see if they would cover the repairs. It turns out they wont. I called them myself and spoke with a manager who offered no options at all, other than paying more than the price of the fridge to have it repaired. I asked if they were okay with their product having such a short life, filling landfills and causing such problems for their customers to which she replied that they are man-made and have no life expectancy. Crazy! For a manufacturer of large, costly appliances, one would think they would stand behind their product more. She also said that she would file my complaint and would have let me know if there was a recall on the fridge or any of its parts. It appears to me that others have had similar complaints. I wonder what warrants a recall. I will never buy Whirlpool again.

We have had this washer for a little over three years. We are a family of 2 so it gets only light use. The agitator stopped working and the repair was going to be $370! The repair person suggested we contact the manufacturer but they refused to even pay a portion of the repair. Goodbye Whirlpool! And yes, it left white streaks on our clothes as well.

We have been very satisfied with the way our dishwasher has performed over the years. It cleans the dishes well. It runs somewhat quietly. It doesnt seem to use too much detergent to get the dishes clean.

This is the loudest washing machine I have ever had. Sounds like it is grinding. Called Whirlpool and said that is normal. Will never buy another one and will let everyone I know how noisy it is and not buy one.

When we moved into our home this past year there was a Whirlpool gas stove model number W10406473A. We have the plastic knobs on the front of the stove which need to be pushed and turned in order to turn on the gas. I recently ran into a serious problem where my cat walked across the knob area and pushed and turned the knob causing the gas to come on the stove. This is a problem due to the fact that a child could have also have easily turned on this stove. This is a definite fire hazard as well as a carbon dioxide problem. I warn anyone with this stove to replace it with another make or model immediately. Im in the beginning mode of looking to see if a recall has ever been made on this model.

I have called Whirlpool six times to request a replacement for a broken deli drawer in my refrigerator. I was told to throw everything away from the unit, since the whole assembly would come complete in the mail. First call: Ordered the replacement: what came was a glass shelf without a drawer or gliders and hardware. Second call: requested the drawer and remaining parts. Third call: only received the plastic drawer without any means of installing it. Fourth call: received only one side glider, again without hardware to install. Fifth call: requested a supervisor (Kimberly) who took the order for the remaining glider and all hardware. Received second glider and (1) screw when two are needed.Sixth call: asked rep Brigitte for a supervisor and was not connected. Given the run around and told that the rep spoke with a supervisor for me and would send out a repairman to assemble the unit. I just need the missing screw. I have spent a lot of time on the phone trying to get what I need from Whirlpool and do not have time to wait for a service repairman to come out. I just cannot fathom how that many calls - with me being patient and calm - cannot produce the required items. Horrible.

Its amazing to me that every other complaint listed here is identical to the problems I have had with my Duet washer. In the past 4 years, I have had two Duet washers and now, the 2nd one has to be replaced. On the first, the control board blew and it was too expensive to consider replacing. I had a new Duet later that day (I use a great, small local appliance store that is reliable and has a great reputation so I know Im not being screwed over). This one made it for 3 years before the bearing broke. It sounds like its about to launch into orbit. I can either continue to use it until it stops working (likely very soon) or just replace it now as its too expensive to repair. I cant take a chance on it breaking down, so...Thats a good gig Whirlpool has, huh? Repairs are prohibitively expensive so they sell more machines. Whirlpool appliances used to be among the most reliable and well-made. Not any more. Two Duet washers in 4 years in my honest opinion is ludicrous. When it did work, it seemed to do the job and I have to admit to very, very heavy use (3-5 loads/day). But the days of a washer lasting 20-30 years are long over.

I bought a Whirlpool water heater in 2009. I paid $588.46 at Lowes. Turns out it is in a class action lawsuit for faulty thermocouple. I was given a coupon from Whirlpool for 2 new thermocouples as part of the class action lawsuit. The thermocouple goes out on it every 1-3 months. You never know when youre going to have a cold shower getting ready for work in the morning. I literally could have bought a new water heater for what Ive spent on thermocouples the last few years. The last two times it went out, I had to replace it twice within 1 day. Im sick of replacing it and have decided to install a new hot water heater. I am disgusted with Whirlpool and tried to contact them about it but have gotten no response. I will never buy another Whirlpool product and would not recommend them to anyone!

We bought our washer in on 2011. Within a few months, the washers behind the screws on the top began to rust. Now less than two years after purchasing this high efficiency and expensive washer, not only are all the washers rusted on the plastic lid but behind the the lid and the side of the washer is rusted. Very disappointed and recommend that you do not purchase this machine.

We purchased a number of Whirlpool appliances (dishwasher, double door refrigerator, Duet stackable washer and dryer). After 14 months, the ice maker broke. $200 later, it was repaired with an upgraded kit.Last week, the washer error coded and the door locked so we could not get out the wet clothes. Called customer (no) service and they advised that we needed to call a service tech because he has a special tool to unlock the door. I stopped by our local appliance store and the counter person told me how to open the door. Had the tech come out for $70 and it could be the lock mechanism or the control panel. It turns out to be the control panel, which costs $250 + labor and would total to around $500, give or take a little. We are in our 60s, my wife does not take in laundry and the ice dispenser was seldom used because I can sneeze ice faster than this can dispense it so I open the freezer door to get my ice.The tech and the store clerk said that these were common problems with these machines. This was a major expense when purchased. So far, the dish washer has not had any problems, but tonight might be the night. The reason we bought Whirlpool is because of the Maytag connection, now that is in the same toilet.

We purchased a mobile home in 2008 that had all Whirlpool appliances. The microwave quit working 2 times before the warranty was expired. They paid to have it fixed. After the warranty expired it quit working again when it was about 3 years old. I called the repairman and he said it might be the most expensive part in it, so it would probably be cheaper to buy another one. I had to buy the same model because it was a built in microwave and I couldnt find another one to fit. It quit working about 2 months before it was 2 years old. I called the company and they were polite but said they couldnt do anything since it was out of warranty. I have been through two of these same models in 5 years. It ought to be against the law to sell such junk.

Bought this refrigerator in June 2018. Had issues with freezer section and service technician came July 19. Issue was resolved but only temporarily. Had another technician come in Oct 3 and was told he had to order a new freezer drawer which should take 3 days. Now being told the drawer won’t arrive until Nov 15. You call that service? It would have taken less time to get a new refrigerator. I would never recommend buying Whirlpool products to anyone. What’s the point in buying a product that you can’t get proper service on.

I have had a terrible experience with fridge Whirlpool. Two fridges have been delivered to me in bad condition. The first one was aesthetically awful (looked old and used) and the freezer didnt work so it was exchanged. The second one works and it looks ok but it makes very loud noises all day every day. I live in an open concept condo and this fridge sounds like a train for more than an hour more than 5 times a day, it is terrible. I have been calling customer support for a solution and first of all, there are no technicians in my area, and since the fridge works as designed there is nothing to fix so Im stuck with a terrible noisy fridge that I hate and destroys my day which I paid a lot of money for thinking that the brand meant quality but it doesnt. Customer support doesnt respect the customer and their answer that the first works as designed makes me understand that Whirpool designs bad quality fridges. I have never heard a fridge making these noises, not even brands that are less named than Whirlpool. For your inner peace, I recommend you to stay away from Whirlpool-Maytag fridges... If the fridge is in bad condition (but working) youre going to be stuck with it. The brand doesnt really mean quality and support... it just means more expensive.

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

I got a BRAND NEW Whirlpool from Habitat for Humanity. I registered it as a new product and was told it came from Lowes. Habitat only warranted it for 30 days but when it went out in 60 days, I called on the warranty. They sent out a repairman who said it was unfixable and after 2 weeks waiting to hear from them, Whirlpool said they would not honor the warranty because the serviceman said it had been dropped. I am a disabled senior citizen, I guarantee you I couldnt lift it long enough to drop it. Habitat said they didnt drop it and so did Lowes. Meanwhile, Whirlpool had the nerve to send me an extended warranty for the same refrigerator that they wouldnt honor the original warranty and they treated me like I was just trying to cheat them or something. The only thing I can do now is put it out in my driveway with a big sign on it to warn others NOT to buy Whirlpool products. Big deal.

We have had a Whirlpool hot water heater for 6 years and 14 days. Note the 14 days. It has been nothing but trouble and we have called the company repeatedly for help. It finally stopped working altogether 14 days after the warranty ran out. Thank you Whirlpool for nothing! It had a filter on the bottom of the heater that constantly had to be cleaned which was next to impossible. We had to buy a special brush to try to reach it. My husband had to take it apart several times a year and clean it to keep it running. Whirlpool should have replaced it within the first year but instead offered many suggestions about cleaning and etc. so they would not have to replace. Today it is out of my house for good and I would advise anyone reading this to beware! Horrible product!!!

I have 2 dishwashers. A stainless Quiet Partner III & a plastic Quiet partner II. The Partner III never gets the glasses completely clean. The cheaper Partner II gets everything clean but has had several service issues.

I purchased this Whirlpool dishwasher from Sears on 3/25/2010. Then on 8/11/2012 the dishwasher completely failed to operate. I called for service and they checked it out and they found out that the control board had failed due to moisture getting into the electronic components. They replaced the control board & control panel and the dishwasher has worked until today (2/08/2014) - 17 months, and now exhibits the same problem. The original repair costs including labor was over $400. Not really acceptable and demonstrates very poor quality control and design @ Whirlpool. As of now, I am considering whether to purchase a new machine (obviously neither a Whirlpool or Sears product). As part of the original service the soap dispenser also failed and had to be replaced. I believe Whirlpool should be responsible for some of the repair costs.

After doing much research on refrigerators, I chose the Whirlpool with the French doors and bottom freezer. Within a month, I had to call the repair service. The freezer made a thick layer of ice on the bottom, wouldnt shut properly (I had to keep a heavy box in front of it to keep it closed) and frosted over all the food in it. On his second visit, the repair man told me that the company knows about the problem, that there was a problem in the design of the appliance, and created a piece to be installed in the machine to alleviate the problem. The problem has not been fixed with that added piece, and the repairman has been here a few more times. Now the freezer just randomly stops making ice on top of all the other problems it has. The retailer would not take the fridge back, and I refused to buy an extended warranty for an appliance that the company themselves knows is a lemon.

No get this and the dryer used. Top of the line. I am having fun seeing all the choices. I would recommend because of the efficiency. Measures soap and softener depending on the load size. Like a miracle.

I bought a Whirlpool dishwasher from lowest in May of 2011 and it stopped draining, serial # f11601686. I was told it was under warranty and you sent someone out. But surprise, I got a $129 service bill and it couldnt be fixed, computer board gone and drain motor shot. I was told its cheaper to buy a new one. After 10 months of use, we need a new one. I think you should replace my dishwasher and pay for a service call. Oh, the reason they said it wasnt covered is because they sold me a 2007 model.

Bought the above named model number Whirlpool dishwasher in Nov 2017 and it stopped cleaning 6 months later, dishes were instead of dry and NOW the motor is completely shot! Never again! This is ridiculous that the part cost more than the product! Worse that I need it repaired or a new one in less than 3 years!

I bought the Whirlpool Duet front load washing machine. It was a piece of junk and I bought it 3 years ago. Sounds like a jet taking off during spin cycle and drain.Well, let me tell you, its terrible. It walks out of the space its in during spin all the time and the F Codes. Im done! Just replaced the pump and motor for the drain on the thing and unplugged it several times to reset it. Still is giving me F codes.Im done, I tell you! Done! This has been going on since we bought it!

The clothes have a stale and mold smell. The whites like tee shirts and shorts and other whites are a dingy yellowish color. The detergent that was recommended and pellets used every month do not work. I have called and complained several times and the operator said that she had one and it works fine, the other person said to wipe the inside of the washer and leave the door open after each wash and not to store the dirty laundry in the washer till next use. They never explained that you have to run a special pellet through the afresh clean washer cycle. Well, we have tried it every time and the clothes still do not clean and stink bad. We asked them for an exchange and they said no. Is there anything we can do?

We purchased this Kitchen Aid stove December 7, 2016. I dont use the oven much, but have found that when it gets a little dirty and I use the Aqua Life function, it does not clean. Have tried by setting a pan of water in the bottom and raising the temperature to 300 degrees, but nothing cleans. We went with this feature to be more environmentally responsible. Leons, where we purchased the stove, claims that they have heard nothing of this issue and have not been informed of this by their head office.

I have had to replace the thermostat 3 times. Worst fridge I have ever owned. Lost lots of food and time and money that I will never get back. I will never ever buy another Whirlpool product again. Aint got time for that.

I bought a Whirlpool refrigerator in February 2010 GS5VHAXWY00 side-by-side door ice maker. From the beginning, when crushed ice was used, the dispenser would freeze up. I had to remove the container to defrost. The container will not go back in place.Do not ever buy an indoor ice maker. I am out of warranty---very little help from Whirlpool customer service. They will be glad to send a service person.

I have been a dedicated Whirlpool customer for 50 years. I purchased my new, Cabrio washer and dryer in 2011. The dryer works fine. The washer does not. It ties everything in knots. Most everything comes out in one large, wrinkled lump. When washing sheets, it wraps the whole load in a soaking wet, fitted sheet bubble. You cannot wash one item by itself, because it will become unbalanced and shutdown. I will say that I havent had any repairs yet, but I have a feeling, its only a matter of time. I have decided to buy a new washer, but it will not be a Whirlpool.

The ice builds up over two week periods and begins to leak onto the floor, requiring me to empty the freezer, chop out the ice and put everything back. The repair job is in the vicinity of $100. Check the net. This problem is endemic. Since this is a problem created during the manufacturing process, Whirlpool should be fixing this problem free of charge. I will never purchase another Whirlpool product.

Whirlpool Duet Machines - I feel very fortunate as I have not had a single problem whatsoever with my Whirlpool washer and dryer and it is 5 years old. Never once have I needed a part or had trouble with it. I feel bad for those of you who are dealing with this as what is worse than a washer/dryer that does not work?

I have had this Cabrio washer and dryer for two years now and I would do better washing my things by hand. Save water, sure there is none!! I have a glass lid and I actually stood there and watched a cycle and the clothes on top never even got wet!! My whites are now gray!! Called the company to get nowhere. I am going to buy an old-fashioned washer that actually uses water. I tried to be eco-friendly but I dont like dirty clothes!!

Our 3 year old 2013 whirlpool gold French door refrigerator was not cold enough in the freezer. I tried a few self help remedies. Then had repairman. He had good news, bad news. Good news is Whirlpool will replace the evaporator because, they know they have a problem with the part. Bad news is, they wont cover the labor which is $400.00. Freezer now fine. Has anyone else had this situation. I am pretty angry that they wont cover labor for a part they know is defective.

I think the whirlpool washer is a very nice machine. I think it does a good job of cleaning but still has the tub odor problem that a lot of front load machines have. As far as reliability it has done pretty well but I did have to replace the tub bellow and it is only 5 years old. It also makes a lot of noise so it is not a quiet machine at all. The steam option on the washer is a nice feature but not sure how much it does to help clean stuff.

We bought a Whirlpool side by side refrigerator in September 2009 for $898, which was a lot then. Last fall the ice maker jammed and started dumping ice in the floor. Yesterday, we noticed that things in the freezer werent solid. After checking, we found our frozen food had thawed and things in our fridge werent very cold either. We called Whirlpool which was no help. Then we called a repair man who told us, “There was a leak in the seal system and it was low on freon. Would have to replace a compressor, evaporator and it would be better and cheaper to just buy a new refrigerator. It has just turned 4 years old. I called Whirlpool again and they said they didnt know why it went bad. I said is it a recall or just a bad refrigerator. The girl was no help at all; I kept asking to talk to a tech and finally asked for their corporate office address which she said was 553 Benson Rd., Benson Harbor, Mich. 49022. I now have to buy a new refrigerator and it will not be a Whirlpool.

I was having trouble with our Whirlpool water heater and thought that wed have to shell out and buy a whole new one. Chris saw my complaint and helped me find the right replacement kit at a minimal cost, as my unit was out of warranty. He even took the extra step and overnighted the parts for us at no extra cost. I was extremely impressed with Chris professionalism and customer support skills.

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

Whirlpool Cabrio - We bought this washer in June 2013. The gearbox just went out (17 Nov 2015). Terrible product. We had to buy a new washer; and it wasnt a Whirlpool.

I bought this washer (model WTW7800XW) on 12/23/2010. Never happy with its performance from the beginning. Within the first 18 months, the lid hinge completely rusted and broke. The repairman stated that the hinges and glass lid would need to be replaced at a cost of over $400. We paid $899 for the washer. Instead of paying that much, not knowing if it would only last another 18 months, we removed both hinges and removed the lid manually to use the washer. After complaining to Whirlpool about the problem, they thanked me for the info so they could use it for the future. The latest problem to arise is the light inside the washer. The mount for the light was made of steel and has completely rusted away, so the light is just hanging inside the washer. Whirlpool needs to step up and resolve the issue with an extended warranty for these machines.

We bought Whirlpool Frontloader Washing Machine not over 1 month ago and it started to malfunction showing Ed1 error on its display. We contacted the service center and it was taking too long to have a visit from a technician. Then the technician, who also installed the unit came and checked the unit. He called someone from corporate office or from support team to ask what is error code Ed1 and overheard over the phone that this is a known issue on the brand. The technician said it is possible that unit will be replaced or only the motor. I contacted the brand support thru Messenger and requested to have the unit replaced, because again, the unit is not over 1mo old.I was advised it is not possible as replacement of unit is only applicable when the issue happened within seven days of delivery. STUPID ISNT? Policy is something unworthy for a product that is over 30k. And again, unit started to malfunction not over a month after it was first used. I would say we pretty much took care of the unit, we only use it twice a week. Placed it where it was perfect to put. Followed every advice given to us by the technician who installed it but still, it malfunctioned a few weeks after we started to use it. I am ashamed of the brand itself, we should have chosen Panasonic or Samsung instead not a dumb brand like Whirlpool. I certainly do not recommend the brand for a washing machine unit. Frontloader is a crap.

The first Front load Whirlpool washer leaked. 5 repair techs visits. Wasted days. Finally located the leak, in the main basket. Replaced washer. Second washer the clothes come out smelling like a horse blanket. Mold. Clean the washer every month still mold. Plan on junking the washer a getting a new model. Never expected this much trouble and time on a basic appliance.

This is about my Whirlpool washing machine that has abruptly stopped working. My Whirlpool washing machine was bought in 2013 and was running [absolutely] great until Tuesday October 3, 2017. I called customer service and they said it was out of warranty. My Whirlpool washing machine model number is: WTW48008Q0. Serial number is: C34923747. I do not have the money to get this machine fixed. I am already a struggling mom, working hard to pay bills and I am already falling behind on most of them. I just had death in my family and now the machine dies - well there seems to be no end to all of this. I would really appreciate Whirlpools help in getting my machine up and running again. I have been a loyal Whirlpool customer over the span of more than two decades. I am a Whirlpool fan. My past machines have lasted 12 plus years on upwards to 15 years each.Let me share exactly what my washing machine is doing: I went to wash clothes as usual the other day; the machine filled up and stopped abruptly - that was it! It did not spin but instead emptied the water without washing the clothes and made some loud chitty chitty bang bang noises before it was all over. I unplugged it after wasting a lot more water thinking that it might just suddenly start working. It did not start working again, it just continued its non-working status.My family has bought Whirlpool washing machines and dryers for years from Sears; we were totally satisfied with the products we purchased, however, this washing machine did not make the five year mark. I really do not know what is going on with the machine; what I do know is this - it stopped working and I would like to get it working again. Hopefully it is not defective by design. #WhirlpoolWasherDefectiveByDesign. I found Whirlpool washing machines to be very reliable and would love to continue my great relationship with Whirlpool.

I have posted on here in the past about the problems with the Cabrio Washer from Whirlpool. Our third top load lid was just ordered since 2011. There is a design flaw where the plastic frame around the lid cracks and causes the lid to hump up. While shopping at a local appliance store recently, I saw a new Cabrio washer and the lid and hinge system has be re-designed. I wonder why?????

Just bought 4 new whirlpool washers and dryers for my new four plex I am building for clients. Two of them leaked violently along the wall and downstairs. Did I see they were BRAND NEW. Total garbage. Now I have to pay for servicemen to come and fix it. NICE AND THANK YOU for your poor quality commitment. Now my clients are pissed off because they cant move in because whirlpool makes garbage material. So the extra cost it has cost me is totally unthinkable. Whirlpool, ask me if will buy from you again. Thanks for ruining everything due to your inconsiderate quality levels.

Purchased new Whirlpool washer from builder - never worked. Serviced 4 times by Whirlpool - does not wash, does not sense, shakes like crazy. No resolution from Whirlpool - worst customer service experience.

Greetings: I purchased a Whirlpool refrigerator on July 3, 2014. And the supports for the door to open and closed have grinded and worn out - not allowing the door to close properly, requiring being lifted up, and pushed close as much as possible. Not the quality I expected with the purchase of a Whirlpool product. I want this door repaired or replaced at the expense of Whirlpool. Having paid over $600.00 for the product, I didnt expect no problems like this at all, poor design. The weight of the door is too heavy to support a hinge mount in plastic, its ridiculous. Now cooling is being wasted, runs constantly, and just not the quality I expected nor received.

In July 2012 I purchased refrig, ed2khaxvb (model #). By Oct. 2014, after numerous service calls to unplug ice blocking chute, an ENTIRE door was factory ordered and DELIVERED. Feb 2015, A&E service installed new door. Later that day, I opened the freezer door which had insufficient suction and ice is again sliding down the chute to the floor. The stress this has caused me (87 yrs old). Case #, phone and ref..nos. could fill a book. PLEEEZE HELP. What can I do???? Ty.

I love my Whirlpool gas stove and oven. We opted for the convection feature as we are a family of 7 and often need multiple items in the oven. This was a very useful detail. I didnt know I needed that. I now cant go without!

My 2 year old refrigerator died. I called Whirlpool and their customer service is horrible. Finally after weeks was able to purchase another refrigerator from them directly at a discounted price and they sent the wrong one. I kept it because I could no longer live without a refrigerator. Horrible company, terrible customer service and even worse product.

I bought this washer because we are a family of 6 that washed a lot of laundry. I bought the extended warranty from Lowes but not sure if this thing can even be fixed. The guy has been out twice. Replaced the control panel. I cannot wash more than 3 towels or it comes unbalanced and goes crazy. I need this fixed. I am so irritated. A recall needs to happen.

I have never posted a negative product review but must do so now. The refrigerator is 1 1/2 years old at most and has been well taken care of. I noticed today that the finish at either side of the bottom of each refrigerator door handle has a problem. I couldnt tell if the finish was pitting or is just discolored. I called customer service and expected that they would help, especially since we have an extended warranty. Representative number one told me that the extended warranty only covers problems that affect the function of the product. I spoke to her supervisor and then her supervisor. I got plenty of apologies but no support. I offered to send pictures, but they were not even interested in checking out the problem.After speaking to them, I took the handle off and I see now that the handle cut into some sort of film that exists on the metal. (I am not talking about the protective plastic coating that is on the the refrigerator at delivery.) The film is lifting off the surface and creating discoloration. If Whirlpool was at all concerned, I think this issue could be fixed with some sort of gasket to keep the metal handle from cutting into the surface. Im hoping the problem is static, but hard to say what will happen. If they had been interested in trying to understand the cause of the problem, it would have been easier to accept the limitations of the warranty. It would have demonstrated an interest in avoiding this problem for other consumers in the future. My last Whirlpool product. Period. Good luck if you decide to do business with them.

Our Whirlpool refrigerator, model MODGI5FSAXVYO, began leaking water from the freezer onto the floor about 3 months ago. We purchased the unit in January 2011. We had to keep a towel on the floor to absorb the moisture. Our troubles began after the freezer door was left ajar and the interior became quite frosty. We had turned off the freezer several times to defrost but nothing helped until this morning when I read the comments of Marea of McClellanville, SC and Ruth of Vavenby, BC.I then decided to begin exploring taking apart everything until I reached the freezer unit in the back of the freezer. I discovered a lot of ice with the ice blocking the drain hole which is supposed to drain condensation from the freezer fins to a drain pan in back of the freezer. Apparently, leaving the freezer door ajar caused the drain hole and surrounding area to ice up. Condensation from the fins would keep dripping until it overflowed onto the bottom of the freezer until it filled up with ice. The water then had nowhere to go but out of the freezer onto the floor. The simple solution to this problem is to turn off the fridge, empty out the freezer and allow the frozen drain hole to thaw out. You can easily remove the back panel of the refrigerator to see if water is then draining into the drain pain. Good Luck! Ed

I have automatic Whirlpool washing machine since 3 1/2 years I am using. Now 2 times electronic board came problem so how many times can change like this? Why they are manufacturing if they cannot solve this problems? Should not sell in the market. This all not coming free and need to struggle. Whirlpool products all very bad appliances.

I bought model N40S61-403 gas water heater. I had it installed, and then I came to find out that you cannot common vent with another power vented unit. I contacted Whirlpool 3 times, and got no help, other then it was hooked up wrong. The issue I have is that the water heater’s pilot light puffs out when the furnace kicks on. These 2 items are common vented, in the installation guide. It does not say anything about common venting until page 11, and even then, it is not in bold or highlighted letters. Now the unit’s pilot light is going out without the furnace kicking on. Once again, I got no satisfaction from Whirlpool, other than it was hooked up wrong. I realize that I am the one who is ultimately responsible. Hopefully, they put something on the box, or earlier in the guide to warn novices, such as myself. As for Whirlpool, that will be the last product of theirs that I put in my home, and as soon as possible, I will be removing 3 other appliances during a kitchen remodel, and will replace them with a different brand.

As long as Whirlpool continues to use JB Hunt for delivery and installation service of their products, I would stay away from ordering. JB Hunt visited my home 3 times, and each time left with the dishwasher as they arrived without the appropriate tools to perform a basic installation. Whirlpool also sent 2 damaged dishwashers that could not be installed. Buyer beware.

Whirlpool Cabrio Platinum Washer - Worst purchase ever! Washer will NOT clean clothes. It leaves detergent residue on everything and I use liquid detergent. All of my husband’s dark police uniforms have grey powdery looking streaks on them after they come out of the machine. Does not matter how I load the clothes. The horrible results are the same. Even rewash and extra rinse, streaks are still there. This model, Cabrio Platinum was very expensive! Never buy a Whirlpool.

I purchased my Cabrio washer and dryer 4 years ago, my dryer doesnt dry completely, I have to do 2 to 3 cycles to dry. My washer has an f51 code and I have problems unlocking the lid and it takes 2 to 3 hours to wash. This is ridiculous and it causing my electric bill to spike. Is there a recall on the Cabrio?

Do not buy a Whirlpool refrigerator. Worst product ever. Literally broke within 3 months. Needs a new compressor and evaporator. They will not exchange the product and the parts are on back order for 3 more weeks.

I am questioning my loyalty because the last two Whirlpool fridges have been repair prone, and have bad design issues for ice dispensing. The dispenser door doesn’t close reliably and lets the ice maker warm up and melts the ice. This supports my rating.

My double oven is only 6 years old - it stopped working on xmas day, had a repair man look at it. He has phoned Whirlpool and has not had his calls returned to buy the part needed. Why is this. I need my oven, why is Whirlpool making it so hard for me to have it repaired.

We purchase the Whirlpool Gold Dishwasher GU2400XTPB7 with our new home. This dishwasher has a plastic tub. For some unknown reason the dishwasher started to leak, I checked every hose connection and could not find the leak until I noticed four small burn marks in the plastic tub underneath the heating element. It actually looks like someone took a cigarette to the plastic. One of the burns went through the plastic tub, and this is where the leak is. Note: at no time did any of our dishes touch the heating element.I called Whirlpool customer service and they said they would send a technician out for $81 and in addition I would be charged $19 for every 15 minutes of service. I had asked to speak to a supervisor and he recommended that a technician come to my house at my expense and all the supervisor could say was that he was sorry, which became even more frustrating. No remuneration was offered. I have had other issues with our Whirlpool washing machine (holes in clothes), gas range stove (ignitron issues), and fridge. l will never purchase any Whirlpool product again including Jenn-Air. I made this quite clear to the supervisor. Whirlpools products and customer service are inferior based on my experience with our four appliances. It would be great if they actually practiced what their mission statement suggests, because as a customer I truly feel defeated.

I have had my whirlpool oven for approximately 6 years. This will be the 3rd time I have had to replace the thermal fuse. For the last three times I have used the auto clean, it blows out the fuse. It has cost me $110.00 each time I called my appliance tech to replace the fuse.

I have purchased two Whirlpool microwaves since 2007. The first unit lasted 5-1/2 years, the second one lasted only 2-1/2 years. I used it at dinner but several hours later it was dead. After reading other reviews I have decided it would be cheaper and less stressful to get a new one. So Tomorrow I will be purchasing a new microwave which WILL NOT be Whirlpool. I no longer have confidence in any of their products.

Bought Whirlpool Dishwasher MDf760SADMZ including protection plan in November 2015. Product did not last even four years --top and bottom racks began falling apart-- and drain motor went out causing near flood in my kitchen. Disappointed consumer.

The door handle is cracking on my Whirlpool microwave. This is a poor experience with Sears. My original door was smoked up from a kitchen fire. I replaced the door and handle in June. My boyfriend does all the cooking, so I did not notice the handle until November. It is cracking on the side. We contacted Sears, and they said it was past the warranty. This problem is due to a defective product. I have seen several similar complaints online.

The repair technician just left telling us that our Whirlpool Cabrio washing machine is fine. It is a little over a year old, makes LOUD noises as it runs, doesnt get the clothes clean and often doesnt even get them wet. The clothing sits above the water and comes out with pet hair, soap and dry spots. We use it the way the manual directs but it seems to be a totally defective machine. We sure wouldnt sell it to anyone nor give it away to some poor unsuspecting soul. Guess it needs to go to the dump. Shame on you Whirlpool for taking advantage of so many of us.

We have a Whirlpool washer wtw5640xw2, we have been experiencing burning wire smells for some time. We had bought the extended warranty. Lowes sent out a repair company. They replaced the main board and the problem has continued. This has been as intermittent problem with the burning smell. We experienced it this week really bad! I thought the machine was on fire. We called the repair company and they said they had fixed the problem. My husband called the Whirpool number and they said they would NOT do anything to help us. We are trying to get help from Lowes where we bought the washer. I am terribly afraid to use the machine. This model needs to be discontinued.. We bought this machine 5-07-12. If we dont get some help, we are going to our lawyer.

I purchased my new washing machine in September 2011. When I removed the clothes from the washer after the first wash, I noticed that there was soap on several of the items. I ran them through another rinse and spin cycle, and there was still soap on several items. In an effort to avoid this problem, I no longer use the soap dispenser tray, and use the bulky cycle to get more water in the tub. Like most of the others, the clothes are tangled and stretched from one side of the tub to the other. Also, it takes 1 hour and 36 minutes to run a complete cycle. The manager of Sears tells me, that because of government regulations, that in a few years, you will not be able to buy any other type of washer. I purchased this machine, because it was highly recommended by Consumers Report magazine. I filed a complaint with them eight days ago, but have not had a response.

Cabrio washer bought 5 or 6 years ago. Started a whining noise when spinning, so loud we close the washroom door to hear the TV. Called service, they immediately knew that the main bearing was going out & quoted the two parts needed to fix THAT COSTS MORE THAN THE MACHINE DID NEW! Labor was not included. Was also told that it will eventually start leaking. Piece of junk. What happened to simple washers that did a good job washing in half the time that lasted 15 to 20 years???

On 5/3/16 I purchased an Amana high-efficiency, low water, top loading washer. What a joke, it is a piece of junk. There is no water so clothes dont come clean, and if you leave money in the pockets no worries. As it will be right there after the clothes are washed and dried (got matching dyer also). They dont even smell clean after two washing. And now you are to purchase a cleaner to clean your washing machine. This is truly not an efficient machine in any way.