I feel the Whirlpool washer we have Works amazing. Its an older model and Im still happy with it. It does big loads without having to do it over again or on balancing itself. I have actually had a Samsung washer and we constantly had issues with it - sensor problems and was not very user-friendly at times. I also feel that a lot of the newer washers out there are cheaply made plastic parts and can break easily. Too many companies cutting Corners these days.

I purchased my Whirlpool microwave model WMH2175XVS-2 in March 2011. The magnetron went bad 3 years and 1 month later. Thats only 37 months! Whirlpool is very sorry but of course the warranty is expired! Oh by the way, I replaced a microwave that lasted 10 Years which was a second microwave (which is still going after 15 years).

Buyer Beware!!!! Warning!!!! Dont buy Whirlpool. Youll be sorry if you do! Dont buy appliances from Home Depot. Youll be sorry if you do! Purchased new Whirlpool gas range 10/29/2019 from Home Depot. By February 2020 the front door fell off, its not cooking properly (18 min frozen pizza takes 30 mins to cook). Clock not keep correct time. Whirlpool unwilling to replace the unit while the third party repair company, “well you should have bought it from us, we stand behind what we sell.” They have no idea when or if the parts will ever come in due to COVID-19. Its been down 8 weeks now.Even under threat of a lawsuit Whirlpool said, Sorry we NOT replacing it, go ahead and sue us. We covered by our contractual warranty agreement. Home Depot said they are unable to help due to their contractual agreement with Whirlpool. I have a dozen hours invested talking Home Depot and Whirlpool on the phone and have no more information than I did a month ago. Whirlpool Case # **. Next step is small claims and public shaming of Whirlpool!

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

We bought this refrigerator (Whirlpool Model # WRF9913F1FM00) last August 2016. From day 1, the water coming out from the water dispenser was not cold at all. Same temperature as the tap water. By November, the refrigerator started to get warm. Apparently, the evaporator fan motor had to be changed according to the technician who spent more than an hour on the phone with their technical advisor to diagnose the problem with the refrigerator. After a week, the refrigerator got fixed. Not only did the refrigerator started working again, even the water from the dispenser got finally cold, too. Now four months later, March 2016, the same problem: the fridge started to not get cold again. In addition to that, the ice would not come out from the ice dispenser and water from the water dispenser is not cold again. When my husband checked inside the door, the ice were all clumped together. They looked like they melted. And even the ice in the freezer bin looked the same. And on top of this, the refrigerator was making so much noise. The technician was just here again today.

Whirlpool duet steam front loader - The rubber gasket ripped about a year ago and cost over $400 to have a tech come and repair. Then the water level switch got bad and cost another couple hundred. A year later, the rubber gasket ripped again. What a junk washer. I am ready for a lawsuit because Whirlpool will not replace it.

Purchased a new oven 06/2016- today, I had Sears come and look at the issue. Need a new Control Board/ $750.00. Called Whirlpool, they will not help, or give me an explanation of why this expense is justified. Very dissatisfied with product; will not recommend, nor purchase again.

Purchased a Whirlpool refrigerator the last week of January 2014 with promised delivery date of February 6, 2015. Received call Feb. 2 that the earliest they could deliver would be February 13th. Received call Feb. 3 that the earliest they could deliver would be February 19, almost 2 months after purchase of refrigerator. Sears, where we purchased the refrigerator, told me that they have been dealing with this for 10 years with Whirlpool. Why would Sears sell products to their customers with this kind of delivery problem? They only communicate with Whirlpool via email, so there is no resolution with a person to get issue taken care of. We will never buy a Whirlpool product again & will never buy anything from Sears again.

Whirlpool WRF992FIFM00 - Purchased new April 2017. Its October now. Service has been called 7 times so far. Ice maker has not worked since day 1. Fridge leaked all over the interior around the third month. Compressor went out in 5th month. Compressor replaced 2x so far. Every component piece was replaced on 5th month. Still no ice. As I write this compressor getting ready to go out yet again. Paid almost $3000 for this piece of crap. On first name basis with technician. He tells me that his guys work on this particular refrigerator CONSTANTLY. So far I have lost over $1700 in food and wages (leaving work to meet technician). Currently battling Whirlpool. My next step will be legal action if they do not refund or replace this stainless piece of garbage.

I have a two year old Whirlpool dishwasher. The soap dispenser cover broke shortly after the warranty ran out. It cost 100.00 for repairs. A year later, it broke again. I sent a letter and the part to the CEO of Whirlpool. They sent a repairmen to fix it free of charge. When you have a problem with a Whirlpool product go to the head of the company. If they get enough calls they will make better parts. Call 1-269-759-6919. Write a letter, return request receipt. It takes a little effort, but it helps a lot of people.

Whirlpool Dishwasher purchased at ABC Warehouse in Chesterfield, MI and was delivered on 10-2-2014, and one year later, we noticed that the tips of the lower basket were coming off. We contacted the holder of the extended warranty (5-yr.) and also Whirlpool. Both replied the fault was cosmetic and was not covered by warranty, that only mechanical/electrical components were covered. When we were buying the extended warranty, we were told that we were covered for all issues that may occur. We werent told cosmetic flaws were not covered. I guess consumers should, before buying a new product, make a specific list of possible problems, and make sure whats covered and not covered. We have been unable to resolve this issue.

WHIRLPOOLS unacceptable customer service! Less than one year ago, we bought a Whirlpool dishwasher, type ADP 4411 from Khoury Home, Lebanons leading retailer of household products. From the beginning, we were not really happy with the performance of the machine, which we felt was not cleaning as well as it should. But the nightmare for us came when ten months later, we came home to an electricity burning smell and smoke from our Whirlpool dishwasher, which had been off. Thankfully, our electric security system in our new apartment worked very well and shut off, so that our apartment didnt catch fire. It was a shock, but knowing that our machine was still under warranty, we contacted Whirlpool to let them know what happened. The bigger shock came when the company told us that the electric board is burnt probably because of high voltage when the electricity came too strong one time and that we have to pay for a new board $190 because such cases are not covered by the warranty! A Whirlpool manager said because the electricity in Lebanon is unstable, we should have unplugged the dishwasher whenever it was not in use - but its not really logic- the same thing can happen while it is in use (and of course nobody told us about it when it was installed)! We, like other normal people, do not unplug our appliances when they are not in use, and we are using in our kitchen a lot of other electronic appliances without any problems.The fact that Whirlpool is blaming us for a fire that could have had much more dangerous consequences is absolutely unacceptable. Unfortunately too late, we have read at the internet a lot of customer comments with these kinds of problems with Whirlpool dishwashers too. At last we got a $20 discount (!!) for the new board but on the service letter they wrote just that it had smell problems. Nothing about burning! A burning dishwasher should be for Whirlpool company a much more serious theme! The way it was handled is NOT a customer service, NOT an international service for a big company like Whirlpool and especially really NOT the customer service of a U.S. company!

We bought this product and had only had it for a couple of weeks when I spilled soup on the open microwave door. My mistake, but I would think that might happen to other people once in a while. The soup leaked around the window gasket of the microwave and streaked the interior of the door. It also ran down into the door of the oven and streaked the interior of that door. No way to clean this up that I know of without taking the door apart. I think these gaskets should not allow liquid they leak into the inside of these doors. Whirlpool says its my problem. They call it a use and care issue. I think its a design issue.

Ive never considered writing a complaint before, but feel it is necessary in this situation. I have had my Whirlpool refrigerator since November, 2007. It has worked great until this past April when the freezer began to overfreeze, cause frost and ice to build up. I have had Whirlpool Factory Service out to repair the unit twice a month since April with still no resolution and the appointments are getting harder and harder to get someone to come out in a timely fashion. I called on September 1st and the closet appointment is September 15th. They werent even able to book the appointment when I called. I was told someone would call back within 3/4 days. When I didnt hear back today, I called to find out an appointment was set.Ive called the Resolution Team to obtain back records of service but havent been successful in receiving a phone call or email. I havent received all of the follow up emails after service which is frustrating since there have been two technicians that have come out for repair and were not provided any history on the unit. If I had the follow up emails, I would be able to share that information with them.I contacted Customer Service to find out what I can do in regards to the issue I am having and was told its best to stay with the service provider that I began with since they are familiar with the issue. I would imagine if they are familiar with the issue that it should have been fixed by now. Ive also sent a response card back to Whirlpool Home Appliances at the Survey Response Center and havent heard anything from them either. When I called to follow up there wasnt anyone that could point me in the right direction to obtain answers. They were able to provide me with the mailing address for Consumer Affairs though. Ive been told numerous times that if it gets to a point it costs too much to fix they will replace the unit. Im not sure when that decision is made. I have an extended contract and will extend it again in October when it expires. I just want the unit fixed or replaced. Its been since April with the same issue. Very disappointed consumer.

I purchased a front loading Whirlpool washing machine March 2017. I have need to have the drain pump replaced and the motherboard replaced. Each repair took 30 to 45 days to get parts and service. I would not recommend the washing machine.

I bought a Whirlpool gold side by side with freezer on bottom and the ice maker in refrigerator part in March of 2013. Ice maker dropped ice one time. In 5 days Lowes brought me a new one out and swapped it because it was in their 7 day policy. Ok this one worked good for about 2 months. Ice maker quit again. Service came out, changed out some parts that didnt work. 2 months roll by the new parts they ordered came in. Service came out again, put those parts in. Worked for about 3 weeks then stopped again. 3 times new service guy comes out and replaces some more parts and he had the wrong motherboard so guess what, had to order. It took 4 weeks to get it here. They came, put it on. It worked for around 2 months. I asked Whirlpool for my money back, they said that that was not a going to happen. I asked for another refrig, they said they would have to have 3 more service calls on the frig before they could do that. Well I have got a $3000 dollar refrigerator that has no working ice maker and Im sick and tired of the runaround. Whirlpool sucks. I will never buy another thing with their name on it. Matter fact I wouldnt take it if you give it to me. (Why) you ask, because in a short time Im going to have to haul it off for junk and its not going to bring nowhere near what I gave for it at the scrap yard.

Model #RF262LXSQ Serial #RT2031953 - I purchased this appliance from Lowes approximately 6 years ago. Last week, I was heating soup and about 5 minutes after I placed the pot on the stove on medium, I heard a large pop and then several cracking noises. When I entered my kitchen, I found the burner flaming red, and when I tried to remove the pot, it was stuck. I immediately turned the burner off and after a few minutes, when it began to cool, was able to remove the pot. What I found was the glass top had melted and blistered and was cracked from front to the back of the stove. Although Lowes was not able to help me, they suggested that I contact you as they had never heard of this happening before. Not only am I dissatisfied that a stove should last many years past this purchase, I am inconvenienced until another stove can be delivered. I believe this to be a factory malfunction of the stove and request a credit for my purchase.

This Whirlpool Duet washing machine is the worst purchase we ever made. The first problem I had was that after delivery, the balancer broke and it had to be returned to the store. 3 months later, my computer board went out. I have to wash twice because my clothes are not clean. 2 months ago, my hardwood floor was almost ruined because water was pouring out the soap dispenser because a sock sucked in the rubber hose and stopped it up. Today, Im unable to use my machine. Whirlpool should recall this machine. It’s too expensive and not worth the money. I do not recommend Whirlpool and will not buy any Whirlpool products again and will replace all Whirlpool products in my home.

This refrigerator stopped working withing 2 weeks of delivery. Lost a great amount of food. It was a real hassle to get the warranty company out. Took several days. Now there are places on each shelf in the refrigerator where food freezes and I have to throw it out. I am not real happy with this.

We get the error code F1 in the start of the cycle and when there is 21 minutes left, we have to stop and reset at least 7 times before the water fills. We put a new sensor in for over $200. The second problem is it goes off balance no matter what the load is. I was going to have it fixed (if possible). After reading all the above I wont waste any more money on it and go buy an old fashioned reliable washer. What a piece of money sucking machine especially when I dont have any extra money to waste down the drain. I wish I knew before. There are a lot of people this time of year I would have rather given the money for a needy cause. How disappointed we are with Whirlpool!

We were at end of cooking salmon in CorningWare and the door blew open with amazing force!!! It is a double oven... Sounds like Whirlpool doesnt care so trust me we are not buying one ever again. :(

I have a one year old Whirlpool refrigerator which was fine for 6 months. Since then it has been a nightmare. If Lowe’s had not intervened on my behalf, I never would have gotten service. Have had at least 6 service calls, 2 new ice makers and various other parts. It should be bright yellow.

Whirlpool model EVLl201NXRQOO, serial no. EWT2423236 - Defective paint on the back of the freezer that caused rust to form and paint to peel off. Whirlpool does not warrant manufacturing defects on the paint. Guess I was lucky for it to be on the back and not the front.

I bought Whirlpool water heater model #FG1H5040T3NOV about 5 years ago. Burner assembly was replaced two years ago and now, thermocouple was replaced yesterday.

Brand new dishwasher never worked. After getting the runaround from Bethel Park Home Depot. I was told I had to call Whirlpool. After being on hold 3 separate times for more than 12 minutes each time, they scheduled a repairman in a weeks time. He said the motor was bad and had to order. Wont be back out until after Christmas. I asked Whirlpool to replace this lemon. Customer service told me they never replace if they can fix. What if something else is wrong? They didnt care. Very rude. Told me manager would tell me the same thing. Never buy Whirlpool. Appliances are faulty and customer service rude. This has been a nightmare experience. Feeling very helpless at this point.

Purchase a brand new Whirlpool fridge at the Fry’s Electronic in 2017. Broke down in 2018 almost 1 year after. Called Whirlpool company for replacing a new one. They didn’t replace before they had sent out a certified technician for fixing 3 times. It took forever to fix it, and still had the same problem after months. Finally, they agreed to replace a new one. Now I still have the same problem with a newer one which they replaced it over a year ago (including fixing and placing time). Just called to the Whirlpool company today for fixing or replacing, spoke to rep Sara, she said that it’s no longer under warranty because it’s more than 1 year. I told her that because the company didn’t replace right away; therefore, it has been more than 1 year; but from the time they replaced it, it hasn’t been 1 year. Ill never buy any Whirlpool products again.

Come with a new home. I dont like them. Piece of junks doesnt worth the money. I have them since a year now. Take too much water, dryer inefficient, consume too much energy. Every product from LG are good. The one coming from GE and sub cie as Whirlpool etc. are very cheap. The door are cheap, you feel the quality the first time you use them, very noisy, consume a lot of energy, broke after one years or less, you got leaks from the pump.

I bought the Whirlpool Cabrio washer 2 years ago. It started recently messing up and making a loud noise during spin cycle and gave me a UL code. I called the repairman and he is stating several things need replacing. Cost more than washer did at time of purchase. Bearings and 2 other items need replacing parts. 550.00 plus labor of 250. I will never buy another Whirpool. My previous washer lasted 10 years. I got rid of it for a matching washer and dryer by Whirpool. Worst mistake and Im out a lot of money. By reading all the poor reviews. Seems like Whirlpool would do something. Its a ongoing problem. Many people have reported. I have read many similar experiences and wished I knew before purchasing this set. If you are reading this do not buy this washer and dryer set.

Purchased a washer on 8-29-2010. On 2-15-2012 transmission went bad. I called Whirlpool, they will not stand behind the product and wanted me to buy a warranty and then they will come out and repair the machine. Great customer service. Build a bad appliance and get the customer to pay for warranty. Do not purchase Whirlpool.

I had the first microwave for 6 years. My husband messed it up so got a new one, same over the stove type. It has lots of programs. Its a rather large microwave, plus it has a steamer which cooks vegetables with steam while I am doing the rest of the meal and whats more important is its quiet. The site is fantastic not just in width but in depth. The best thing about this microwave too is that it has a frozen cycle which does not partially cook the food like most microwaves and the defrost is the same, it does not partially cook it actually defrosts completely without cooking it. This is by far the best microwave I have ever had, and I wouldnt want any other brand. It might cost a little more than the usual brands but its worth it. I also have a mini Whirlpool on my Countertop for my grandchild to use so he keeps away from stovetop at all times.

I purchased washer (Whirlpool Cabrio wtw5600xwg) on April Fools Day 2011. The first repair was check on 1-27-12. I complained the machine was too loud and clothes seemed too wet - the call was under warranty but tech was unable to verify complaint. So guess what? On Jan. 21, 2013, machine sounds like a stressed jet engine. Now we are diagnosed with a bad gear case for a total repair of $439. Now we are not under warranty and Whirlpool takes no responsibility. Doesnt the consumer have any rights? Do you think Ill buy Whirlpool again?

We purchased the largest Whirlpool Cabrio Washer (over $1100 value) 3.5 years ago, and had nothing but trouble out of it. The drum has had to be replaced twice, the motor once, and then supposedly a bolt kept coming off on the drum as well, that had to be tightened twice. Now, we dont know what is wrong with it - we suspect suspension imbalance or something, because this extra large capacity washer is constantly unbalanced even with 6 articles of fabric in it now, and I dont even think about putting even what would be considered a medium-large load in it, because it flat up will not wash. You can put a level on it, and it shows leveled, but it still wont operate worth anything. My wife is so put out by it at this point that she has even talked about getting an old ringer washer (seriously). Sears keeps coming out here because we had purchased the extended warranty and truly if they had simply replaced the washer after the 2nd trip to the house, they would have more than paid for the replacement washer even. Instead, they keep coming, looking at it, then having to order parts, and then come back a couple weeks later to put the shipped parts (which sit around our house), back in to repair it each time. All the while, we go without a washer or barely can wash any clothes. We have even taken clothes to the laundromat during one of the repair instances, because we cant just have mounds of clothes piled up for their month-long service. It is ridiculous how little it seems that Sears and Whirlpool care about their customers. I have gone to Whirlpool and Sears Home Services sites and complained at both. I have called both of their 800 lines in the past and again, this yielded nothing to truly depict either company cares. It just goes to prove that customer satisfaction is far less valuable to either of these companies than the bottom dollar profits in our opinion. I dont know where else to post our concerns/frustrations, so anyone can see how put out these two companies have caused us and dont care, but if anyone knows of anywhere else I can post blogged concerns, please let me know.I have complained previously about a dishwasher that we had purchased that we had numerous issues with. Those complaints fell on deaf ears to Whirlpool and really Sears as well. I dont think all the washers are duds, but this one has been nothing but trouble, and Sears wont just replace it, Whirlpool dont care. I have been given the runaround that it is because there arent three (3) service calls in a 12-month period for the exact same issue. Well, I am sorry that it doesnt appear to be just one thing! I have had it with these services calls, parts having to be ordered, only to hit the crazy repeat button again every time! This is far from good customer service, in my opinion, but rather a way to ensure the most profit is achieved! Thanks.Sears and Whirlpool have the worst customer service ever!

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

I have had the machine pair (Whirlpool Cabrio Platinum) for almost 4 years and up until a few months ago I LOVED the washer. I was advised when I bought the machine to make sure to read the manual, which was very helpful in learning to use it properly. I have never had residue on my dark clothing or ever had the clothes come out partially dry. I use liquid HE detergent nothing powder goes in the machine. I also read many reviews before buying it and a got some advice from them. I have washed king size comforters with no problems. Everything has always cleaned very well. The only issues I have are that when bleach was used in a previous cycle. Ive had a problem with the bleach not being fully dispensed and ending up in the next load. Fortunately it was just towels and not darks!!! Although, I had just bought the towels and now they look tie died which was very upsetting to me. I learned to add water to the bleach dispenser to dilute it and that issue seemed to dissipate. BUT NOW... I COULD THROW A TANTRUM. I PAID 1800+ FOR THE PAIR AND THE WASHER IS SHOT!!! A pretty common problem with the Cabrio from what Ive read. It started by making a very loud noise when spinning, like a helicopter was landing in my laundry room! I continued using it, I even thought the sound was getting better after I did the clean cycle. The last load I did would not complete the cycle because it kept reading that it was unbalanced and unfortunately it was a load of heavy wet towels. I was far from happy when I had to remove them and go to a Laundromat. Needless to say its the bearings and to fix its very costly. I cant even fathom that a less than 4 year old machine needs to be repaired and the cost is roughly half of what I paid for it!!! I do know I will NEVER buy another Whirlpool. What happened to making things to last??? Next machine I will definitely get extended warranty. I can honestly agree with all the other reviews... THIS MACHINE IS HORRIBLE!!!

The pilot of my Whirlpool hot water heater (model FG1H5040T3NOV) suddenly went out and I called in a plumber to check it out. He managed to restart the pilot and we had hot water again, but it went out again within 12 hours. He mentioned that I would most likely need a part called a thermo coupling and I should start looking for it. Well, I found this site and read one of the positive reviews that provided the WP toll free number, so I called. Talk about great customer service! Ben was amazing – he took down all my info and was very helpful. Even though the warranty expired years ago, he overnighted me the replacement parts I needed at no charge. And there’s no charge for shipping either! My plumber is completely anti-Whirlpool HWHs and now he will change his mind when I tell him how efficient they are. I also hope he doesnt charge me a bundle to install the replacement part.

We purchased Whirlpool dishwasher Model #GU3200XTXB Nov. 2011. Two weeks later they replaced the soap/rinse aid dispenser because the rinse aid was running out the bottom of the dispenser. Feb. 2012 they replaced the handle which was loose. July 2012 the panel lights werent working and that was replaced. Feb. 2014 the soap dispenser door would not open, so the dispenser was replaced again. March 2014 the soap door would not open again so the computer board was replaced & the door did open. However, it stopped again 3 days later. April 2014 the dispenser and the board were both replaced. The rinse aid dispenser did not dispense leaving the inside with moisture on everything. So yesterday the dispenser was again replaced but now the rinse aid is running out the bottom of the dispenser. Thank goodness we purchased an extended warranty for $169 or we would have spent more than $1,000 on repairs!! The warranty company refuses to acknowledge that their lemon law should apply. There are 2 of us and we use it 2/3 times weekly.

Dishwasher (WDT710PAYM5) handle on the left side loosened within 2 weeks of purchase. Today the handle fell completely off. The dishwasher will be a year old in August of this year. I cannot figure out how to reattach the handle and there is nothing I can find in the owners manual to help me. There are only two of us and I am the one who uses the dishwasher. This should not have happened. Not real impressed with this machine.

Purchased the refrigerator in May 2018 from Lowes. August of 2019 the compressor stopped working and I lost all of my food. Repairman came out and stated that the compressor was bad on a brand new refrigerator. I am now waiting for a new compressor to arrive.

I purchased this Whirlpool washing machine in July 2009. The repairman just gave us a $1400 estimate for repairs due to failure of bearings. This is an energy efficient, expensive appliance that we expected to last for years and we feel that 2 1/2 years of service is unacceptable. We did not purchase an extended warranty and Whirlpool said they would help with the cost of parts - not labor. We cannot afford to repair a lemon and so purchased an LG front-loading washing machine today. Hopefully we will have a better experience with LG as we will not be purchasing any more Whirlpool appliances ever.

After less than 3 years it was the bearings, of course. Then, being handy and not stupid enough to pay the $500 for the whole piece of crap Whirlpool/Maytag tub, we bought bearings from the PartsDr. We just didnt dig deep enough to know that the strators on these things are made out of the cheapest Chinese plastic and are cracked in the SAME TWO PLACES EVERYONE ELSES IS!!! Imagine that? Will scrub my clothes in a river on rocks before I ever buy a Whirlpool/Maytag Chinese again. All front load seem to have the same problems but at least some other companies admit it and are trying to correct it. Will research and as with everything else stay away from the USA/Chinese rusty, corroded junk.

I have Whirlpool 25 in. Side by side. I love the space freezer size is bigger than the old one I had. Makes ice as it should. Overall solid appliance that I trust. I purchased this refrigerator a year ago after research.

Duet Washer GHW9150PH0 - The washer is about nine years old. Last year I got the dreaded F-11 error code, and had to purchase a new controller board and install it. Now the spider arm on the basket has snapped (cast part). Ive been on the phone with Whirlpool for over a half hour now, and all I get is We have to send a service tech out, and you have to pay for them. I have the broken part in hand, I know the Whirlpool part number, yet they want me to pay for a tech to come see the part and confirm it. Ive been unable to talk to a manager yet, none are available.Eventually the lady agreed to replace the broken basket, after telling me at least five times she could not, but she refused to replace the tub which was destroyed when the basket broke. Ill be calling back to talk to another agent soon.

I had this stove for less than 3 months and the glass top broke after turning on the stove. Now I tried to find out how to purchase a replacement but it cost as much as a new stove....Ughhhh this is so aggravating.

I purchased a Whirlpool hot water gas heater with a six-year warranty. It only lasted three years. When I called for an RA#, I was told, Well, well send you a part after you get a plumber and pay for it. Meanwhile, there is water all over the cellar floor. I called again and was told the same thing. Two weeks of no hot water and no help from Whirlpool. I will never order anything Whirlpool ever again. They stink.

Misinformation provided about their products - I ordered the Whirlpool 30 Drop-In Electric Range pictured in their literature with a gray oven door. When I had it installed, I thought it had a green film covering the oven door. It is not a film. It is the oven door color. It does not show that or talk about it in any of the literature. I would not have bought or paid to have this range installed. The green color does not go in my kitchen! I would sue them for misinformation if I had the money to spare! I will never buy another Whirlpool item.

Bought this from Lowes in 2010 with the 12 yr extended warranty. Have not been able to keep it lit. Takes 4-10 days for repairman just to LOOK AT IT and then he usually has to order a new control valve, taking another 2-4 days (have had the control valve replace 3xs). This means, my husband has to get down at eye level to try to get it to light (hes 63) & if it doesnt light on the 40th try or the cramp in his hand stops him sooner, we have to heat water on the stove, carry it through the house to the bathtub, try to get the temp not too hot or too cool, then hope that our 70 yr old bodies can get down into the tub plus get back out without falling (showers are preferable). My husband bought The best hot water heater $ could buy at our local Lowes store. Because we are getting up there in years, we hoped that this would be the best answer by also getting the extended warranty. They have had numerous repairmen out to our house (6 or 7 last count)... two different men told my husband that they would only be here a couple of minutes knowing it was not going to light for them either. Time wasted. Patience gone. Still they wont replace it because if anyone can get it to light up again, no matter how long that may take, then theres no need to replace it! They have already put more money into parts, labor & repairs than it originally cost. I was told today by the ex. warranty representative that its not considered a lemon! So how do those LOWES/WHIRLPOOL people sleep at night????

Not even 3 years ago I purchased the very large capacity (5.0 I believe) Cabrio Whirlpool Washer and Dryer top loader set for my family. I have regretted the purchase since the first week. The washer would CONSTANTLY beep during a wash cycle, stopping the process saying it was unlevel. We made every attempt to make sure the load was even all around the basin and that the machine itself was level itself. No matter what we did, it would need to be restarted numerous times during one wash cycle taking sometimes hours to do one load. VERY FRUSTRATING. Now the washer will turn on, but it will not fill with water or start the cycle at all.The dryer has cost us hundreds of dollars in repairs, bringing the repair man to our house on a weekly basis for a while. Every time needing a new part. I have made a complaint on the Whirlpool USA Facebook page letting them know my absolute frustration as a substantial amount of other people have, and every one of the other complaints receives a comment back but mine. Although their complaint got a generic response such as, Im so sorry for your frustration, please email to the address below and we can look into your issue.I called customer service a few times to see if they could help in anyway...even asked if they could supply the parts if I paid for labor, and the answer was a flat NO. Nothing...I paid just about $2500 for this set and about $400 in repairs, and no help and no apology for selling me appliances that have not lasted even a small percentage of my last set that lasted throughout my teenage years into my 30’s. I am severely disappointed and ready to take action more now for the disrespect I feel as a consumer. I do not recommend Whirlpool Appliances AT ALL any longer...as they used to be a household item in every family member’s home. Now my large number of family and friends all know my frustration and will not purchase Whirlpool. I suggest this company do something to redeem themselves, because this is just ridiculous. No one has money to throw away like this. Thank you.

I purchased this rather expensive gas range and use the oven very little. We are empty nesters that eat out every day. Went to use oven and it had error code for cooling fan. Called repairman who replaced sensor and oven worked (literally used two times in 4 months). Now error code again. When I checked the code I realized this is a problem with these stoves. Whirlpool why no recall or free fix?

Clothes come out of washer are soaking wet. Despite multiple repairs within the warranty period (1 year), the problem was not fixed. Each time a separate part was replaced. I would consider this as a manufacturer defective product. Despite multiple complaints to Whirlpool customer service, they would not replace the unit. Problem continues and now the warranty period is over and I am paying for fixing the same problem. I would not buy a WP washer again.

The Cabriolet washer and dryer act funny. I really believe its because they are digital... Didnt they realize that at some point moisture would affect controls? Idiots! And if a cycle is stuck, you cant manually move it forward or backward... you know, how the standard machine works... yeah the one with knobs!! Sometimes computers are not necessary and this is one of them... too damn advanced!! Id rather have a good old American washer. Not worth it. I get a better wash at the laundromat. # pissed.

I have Whirlpool 40 gallon heater 5 years ago. The pilot light went out and I replaced the parts. This has happened three times and I have replaced the entire thermocouple assembly three times. The last time, the parts came straight from Whirlpool. This time, the pilot light will not stay lit. I am on my way to buy another hot water heater for my family because I have had enough.

Never buy a Whirlpool appliances because I bought the top of the line washing machine and after 4 years I had to replace it. And then I bought the top of the line refrigerator and after 6 years it goes out!!! I definitely will not recommend a Whirlpool ever!!! And me and my husband do construction and are asked a lot for a good appliances and we will tell our customers not to buy because Whirlpool is assembled in Mexico and their products are not worth putting in stores!!! Whirlpool is not the appliance that anyone needs so I definitely will tell everyone I come in contact with!!! Very dissatisfied!!!

We purchased a Whirlpool (gas) range with double oven, in April of this year. We found that the upper oven over heats, on the right side, and therefore burns or bakes unevenly.The repair company will be out for the fourth time tomorrow. They have been very nice to deal with, but really have not been able to repair or come up with any definitive plan of repair action.

I love my ceramic top. My only complaint is I wish my knobs were on the front of the stove because I am short. It would be nice to not have to reach over hot burners just to turn the temp up or down.

We bought all whirlpool appliances at our new home 4 months back. Our refrigerator has stopped working from the last month. We had 7 different service team people come in to check and they temporary resolve the issue (taking out a plastic piece from the top of the refrigerator, just re fixing the ice machine, or just walking out of our home doing nothing).Friday someone came and tried fixing it and took about 3 hours. The fridge completely Broke down after that in about 6 hours. Whirlpool customer care wants to send another technician in and want them to have them talk to their technician and maybe after that they can do something. This is the 8th time some technician will be coming home. And clearing these technicians curse whirlpool and dont call them. The customer team at whirlpool suck, there is no damn replacement or repair policy. All scheduling is after a week and whirlpool does not give a **. I really hope this company is sued for the emotional and mental stress and the harassment they cause to their customers. Very frustrated. Have no idea what to do.

Whirlpool duet - This washing machine is absolutely horrible!!! I pull clothes out and they are tore up! We have replaced parts that we were told could be causing the damage and its the same thing! I am very unhappy! Ill be calling Whirlpool again but Ill probably get the same runaround - oh we are very sorry we dont have any known issues with that machine. Clearly when you look online it is a very known issue!! I doubt all of these people lied about calling!!

This microwave has crack everywhere and its barely 3 months old. When I want to use it, it makes this weird noise and then it stops. I have not talked to Whirlpool yet, but Ill see what theyll say. My recommendation right now for all those individuals trying to purchase a microwave, dont even look at Whirlpool brand, they just ***.

I wish to file a complaint regarding a Whirlpool flattop electric range that we purchased approximately eight years ago. After the first year, a residue began to build up behind the glass on the front of the oven door. Finally, about 18 months ago, I decided to try to unscrew the back of the door in order to clean this since it got increasingly worse year by year. When I unscrewed the door, the side metal bars broke off and the range is to say the least, looked very unappealing . When the oven self cleans it makes the outside of the oven brown and very unappealing.This is a Whirlpool Gold, Super Capacity 465 range. We have been dissatisfied from the beginning. This complaint is not about the retailer, it is about the Whirlpool product. Please help as I am quite dissatisfied with this Whirlpool product at this time.

Bought washer, it broke down after 1 year. Repair man could not fix for less than $500. Told him he could have it and fix it and sell it. He turned me down. This week went and bought new washer. Told store they could take my washer and he said No. He told me any Whirlpool washer made in the last 2 years break down and cost more to fix than a new one. That I found out to be true. He showed me plastic circuit board not meant to last. They ripped off a very nice senior citizen. Thanks to my son for going and getting me a new washer. Shame on you, Whirlpool.

The washing machine is so loud when it is on, drowning out conversations esp when cooking or eating (it’s located in the kitchen). The machine tumbler has to be constantly readjusted no matter the size of the wash or how many times my husband or myself adjust the tumbler; consequently the washing machine is always dancing, making a horrible banging noise. The washer is under 6 years old. With that said, when you open it, the lip is all rusted out.

When I bought my new retirement home, a Whirlpool dishwasher Model No. DU1055XTVS1 had been installed. After only three years of use, the dishwasher would not complete a cycle except to drain and cancel. The repairman replaced a computer board and when the parts cost and the service cost were combined, they amounted to about half the cost of the dishwasher. I have a PC that is twice the age of the dishwasher and it is still running.

When washing towels or a blanket or quilt, anything substantial it wont spin the water out of the laundry. This washer is only 5 months old.

I bought my Whirlpool range in 2009. Good thing I bought an extra warranty because since then, my oven has stopped working about 5 or 6 times. When I turn the oven on, it does the clicking sound, it starts up then it turns off and sometimes it doesnt even turn on. In 2010, I had my turkey ready for the oven at Thanksgiving. I turned on the oven and nothing. I had to cut the turkey and deep fry it. In 2011, same time on Thanksgiving and now Ive been waiting for 2 weeks for the part. I have 4 kids. I need an oven. I cant take this anymore. Also, out of the blue, sometimes the stove top starts clicking on its own and it scares the hell out of us. I have to unplug the stove. Help.

The worst washing machine ever. First off you cannot turn the water on to let it fill and add clothes as its filling. Secondly the Normal setting will not allow you to spin on low, your choice is high or no spin. High tangles your pants, slacks, shirts, etc. No spin leaves them soaking wet. Also its a water safer but never, never, never covers the clothes in water, and sometimes they dont come out smelling so clean. I dont save water if I have to rewash two or three times. Absolutely hate this washing machine. When I get enough money I am going back to the old agitator model and not any Whirlpool either. Oh and the other thing, you cant just throw you clothes in the washer, you must arrange then to the outside of the center itty bitty agitator. Hate it.

Unfortunately where I live the walls are thin. And my neighbors have complained about how loud my washing machine is. I load it correctly and sometimes while it’s washing it rearranges the clothes and it becomes unbalanced and makes incredibly loud thumping sounds when this happens. I’d say 1 out of every 4-5 times. Also I have multiple towels and clothing that have been pulled. The threads of brand new towel sets ruined from the washer.

Cabrio washer - I have always had a Whirlpool appliances and have always been satisfied with them, but this is the worst washer ever manufactured. I bought it to wash heavy loads of jeans and it takes me all day to wash 1 load because it is always out of balance. No matter what setting I put it on I have to keep rearranging the load. Without putting up with that, the load takes 87 minutes on bulky wash. That is far too long and then you add all the time I spend rearranging it to get it to work. I think there should be a recall or at least admit you have a poor design. My son works for Whirlpool, but Im not sure I will be supporting this company again.

I bought my Whirlpool washer/gas dryer 13 years ago and up till now I havent had one service call or repair done on either one of them. I have owned a Whirlpool washer/dryer before and I didnt have any problems with them either. When the time comes and I have to buy another set, there is no doubt in my mind that I purchase Whirlpool products again!

This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

We purchased the model WFC7500VW, 24” washer and accompanying dryer in June of 2015. Within a couple of months, the water pump went; also we continually had to take the front panel off and clean out the filter when we get an A11 code! Now we experienced an F06 code... This code means the washer can’t go into high speed. The repairman (Whirlpool recommended), told us that a new tachometer motor, etc would run $500-$800 with labor! He also said that the noise the drum made was bad. My dryer works fine (only complaint is the grinding noise it makes, which Whirlpool told me is normal)... I would like to purchase a new washer, but don’t know what will fit under the dryer. I do not want ANY Whirlpool product!

Do not bother purchasing Whirlpool refrigerators. Bought mine new in November. The paint on the exterior has been chipping. They inform me that its a cosmetic issue and that they are not going to repair it. They told me to use touch up paint. The paint has chipped more than once and Im afraid this is going to be an ongoing issue. Its obviously a product defect (my last fridge lasted 27 years without incident). I dont do business with companies who dont stand behind the products they manufacture. These days its all about get their money and the hell with them once we do. Last time I purchase anything Whirlpool.

Bought this front loader washer. It is unbelievable this thing will not wash a load properly. It refuses to spin at high speed because it is constantly out of balance even if you only have one or two garments and it keeps saying add more garments. As you keep adding garment its even worse literally. If you have anything that is heavy in this like a towel or a pair of pants or a hoodie or something like that for sure youre going to have to wash one thing at a time. I will never buy another one. I wish somebody would sue the living crap out of him for this piece of junk. I want my money back...

I bought two Whirlpool (Model: bfg1j4o4t3nov4o) natural gas water heaters. The pilot light would go out to so I re-lit it and sit in the attic until the water got hot and the burner go out. But before the burner went out, I could see the flame go from blue to yellow and hear the water dripping down on the burner. So, after the burner goes out, the water would drip down on the pilot light putting it out.They sent me a thermo coupling for free but that was never the problem. The problem is that the water heaters are poorly insulated which causes the water to drip down on the pilot, putting it out. To make a long story short, no part they send will fix these heaters. I have a GE heater in my house for 20 plus years and it is still kicking. I should have went back with that same heater.For some good news, I got my money back from Lowes. I raised so much hell in that store that the manger gave me my money back just to get me out of his store. I made them realize that all we want is our hard-earned money back from a product that does not work.

My old Whirlpool stopped working so I purchased a new one 2 weeks ago. I have had 3 items ruined since using this machine. It is leaving blotchy spots on the clothes and they will not come out. I do not use bleach but the spots look like bleached spots or stains. After reading other reviews I would like to know what the manufacturers are going to do. It is not very economical if we have to rewash everything or replace clothes the new washers are ruining. I have just spent hundreds of dollars for something that does not do its job and would like to know what the solution is. Is there a model washing Machine out there that still cleans clothes? Since mine is only 2 weeks old can I trade it in (Lowes)?

We too have nothing but problems with our supposedly top of the line convection/microwave oven. Purchased in 2010 in February for new kitchen. From start, original microwave installed did not work, would not cook or heat. Dealer replaced. One year later, same problem, but now out of warranty. Had to pay labor, costs, and parts to get fixed. Fast forward 13 months, again magnetron needs replaced, microwave will not work. What a hunk of junk for our money. I will never buy any Whirlpool appliances again, and I will tell everyone I know the same. When you call customer service, they are nice but only say “too bad, out of warranty”. What a joke for a major appliance company to tell customers. It is obvious that this microwave is faulty from the get go, and they just keep on making them the same way and not trying to fix the problem.

I see that I am not the only one with the same pilot problem. I just purchased this new model that came out last summer. I bought my new water heater in September and just this past weekend, it messed up. I have not had it for 8 months. Whirlpool sent out a technician yesterday and he said the assembly is not good and the pilot would not light. Well they sent me a replacement part and they are coming out today to install it. The funny thing was that the technician said, Oh, these are hard to work with. We have a lot of problems with these models and they just came out last summer. Its the on that has the little box and you push the pilot button in and hold it until the red light comes on. Anyway, he said he didnt carry parts for that one, only the old ones which last longer. The ones that have the black round circle that looks like a thermostat. I said, Really? Well the reason I bought this water heater is because my last one that I bought 2 years ago kept having the same issue. Whirlpool sent me the assembly with the pilot and all 3 times and would never replace it. I got tired of it always messing up so after having it for 2 years, we just dumped it and went and bought this new model. Here we are 8 months since we bought it and the same thing is happening. I am so furious. I am pissed off that they dont recall these if they are defective. Why do they keep selling them if people have problems? My cousin called me a couple of months ago and asked if my husband could check her water heater and its the same type I had and it was doing the same thing. I will never buy another Whirlpool water heater again.

We purchased a Whirlpool Cabrio washer brand new from Lowes. It did great for about 6 months when a terrible grinding noise started. Then it also would not spin dry the clothes - they would come out completely soaked. Repair guy came out and fixed it. Lasted for about 1 year - same thing again. Lasted about 1.5 years this time and now the loud grinding is back and my wife - who Ive heard cuss just a couple times in 20+ years - said, This ** thing sucks. The clothes are soaked. I cant stand this washing machine. So, Off we go to buy a new machine. Definitely not a Whirlpool though. Id give this machine 1 star because it does a decent job for a while but major repairs 3 times in five years is not what I deem an acceptable appliance.

18 months ago my husband and I bought our first Whirlpool washer and dryer to go with our first home. 6 months and the dryer stopped spinning. There was an issue with the belt. 12 months later the washer has stopped draining and spinning. It is 2 months since our first filed complaint with our extended warranty company and we still dont have a washer that works. I dont care if I have to take my laundry to the river and beat it with a rock. I will never buy whirlpool again.

I purchased my Whirlpool Gold Series refrigerator from Lowe’s in Rockledge, FL. This was my third purchase after returning an LG Refrigerator as well as a Samsung refrigerator for having multiple defects! My Whirlpool Refrigerator purchased June 2014 has motherboard replaced that showed obvious evidence of factory board flaws when boards were manufactured. Top mounted ice maker drips so much water it fills my veggie draws with water ruining my food. Mold is present inside my ref now from constant leaks. Drawers were replaced by tech also due to ill-fitting design during first few months. Water will not dispense in door after one year, gave up using it. This is a horrible and very expensive appliance wrought with POOR DESIGN FLAWS. WHIRLPOOL does not care about its consumers. Their engineers must be some of the worst in the world. Our old 70-year-old kerosene powered refer in the Bahamas is still making ice, yet most modern day refs are like buying cheap home computers that constantly need service to keep them running. It’s a lifetime investment with $89 first service visit to determine problems then weeks of waiting for parts and second visit for the repair to be completed until next electronic malfunction. DONT BUY A NEW WHIRLPOOL APPLIANCE. WAIT AS LONG AS YOU CAN FOR ALL THE CLASS ACTION LAWSUITS AGAINST WHIRLPOOL & Kitchenaid to play out.

We purchased the Cabrio washer and dryer set 2 years ago (7/22/15) from Lowes and have HATED them since day one. The first wash in the washing machine left clothes dirtier than when they went in. Our clothes have never gotten truly clean. The washer has a HUGE tub which is what I liked about it so I can wash my King sized comforters. What a joke that turned out to be. The comforters only get half wet even on the deep water setting. The machine even left dark stains on my light colored comforter and ruined it. Fast forward to 2 years later and the washing machine stops spinning and fills with water clear up to the top of the tub and wont drain. I had to put the machine on the rinse and spin option to get it to drain. Tried a different setting and it worked for a few months but started doing the same thing. The washer seems to be unbalanced no matter what size load I do. I am thoroughly disgusted with this machine and wish I would have never purchased from Whirlpool. The dryer has always worked fine until recently (2 years after purchase). It quit drying the clothes and leaves everything twisted up and wrinkled, even if I take them out of the washer and shake them out before I put them in the dryer. Doesnt matter what setting I put it on, the result is the same. So now it seems as though BOTH of my machines only lasted 2 years. Im not going to bother fixing them, these will be used as target practice. I will never buy another Whirlpool product again.

I would like to share whirlpools lack of ownership for parts they knew were faulty that caused significant damage to my floor. Its absolutely horrendous that one would purchase the highest end dishwasher they offer (all highest end appliances in 3 homes so far) and the company is only willing to cover the replacement of the part. Its a horrible way to run a company. I hope that my review will warn prospective customers to stay away from a company who is only willing to take your cash at purchase (charging an arm and a leg no less) and not care about any repercussions after the fact. I hope they enjoy our 15k, because it will be the last penny they get from us.

Bought in 2009 brand new set washer and dryer together at Best Buy. The washing machine in 2011 started its never ending problems. I’ve paid for parts & labor for the door lock sensor mechanism multiple times where I learned to repair that myself even buying parts and installing on my own last time... Then a drain pump went bad. Replaced that. Now a code f51 sensor to a motor rotor not spinning issue. Horrible. All the money and time in this unreliable machine is so awful. This thing also isn’t that great when it works too. Goes unlevel way too much having to redistribute and restart cycles all the time... Wish it washed better for the price and all the trouble. It is the worst machine. Has to be! Everyone I know can’t believe the fight I’ve had through the years with this machine. The company doesnt help you. Costly headache Junk machine!

I was harassed and tortured. I got an extended warranty on Whirlpool microwave oven but from the last six months, I was not able to use it. The original part worked for four years but from the last four months, engineers have tried to change the part and it was a duplicate one every time. It did not last for 15 minutes in front of the engineer. To date, the engineers are still not able to fix my oven so I havent been able to use it for the last four months. Does it mean that Whirlpool make duplicate parts too and just ditch the customer? Is this also included under Whirlpools code of ethics?

We had to have a sensor switch installed. We purchased this washer, plus the matching dryer June 10, 2010. This was just 16 months ago today.The cost of this repair was $160.24, for part labor and service call. The service call was excellent. Wish I could say the same for washer.We had previously owned a KitchenAid washer for over 20 years (before purchasing Whirlpool washer) and did not have to have one repair on it. Very doubtful I will purchase another Whirlpool.Looks like quality is a thing of the past.

This is the information I tried to send to Whirlpool only to get a message that it was undeliverable: I purchased a set of whirlpool cabrio washer and dryer on 10-23-2013 (model numbers WTW8540BW, and WED8500BW). On 01-25-15 the washing machine failed to power up just over 2 months out of the standard warranty. This wasnt the low end cheap models. With cash discounts we paid over $1600.00 for the set. After a $70.00 dollar charge to the repairman we are told that the unit has a bad electric control board (part # W10761026). And unfortunately the part is on back order until March 1st, 2015 as of right now. So if and when the repairman gets the part and installs it, I get to pay him an additional $260.00. My family has always been such a dedicated Whirlpool appliance purchaser but this is wrong.Oh I almost forget, now I have to rent a washing machine at a cost of $55.00 per month until mine is repaired. I believed I was purchasing Whirlpool quality. The type of quality that doesnt need an extended warranty because Whirlpool is made to last correct? Please assist me in making this situation right and restore my faith in the quality I was raised with in Whirlpool products.

I purchased a Whirlpool top load washer that has been ruining my wasted items. My terry cloth towels all have pulls in them, knit polo shirts have pulls and holes, sheets and other items of clothing get caught and stuck under the agitator which then take a great deal of muscle power and struggle to release them. I have had the agitator replaced 3 times to no avail! Whirlpool is not willing to admit that I have a defective machine and will be sending another service repairman to try and fix the problem - this time, no charge to me after many tries and frustration. Customer service is not good unless you are lucky enough to get a supervisor who is willing to listen. We shall see what this next service call brings. I do not have high hopes and will keep you informed.

I am very happy with this dishwasher. It is not a high end, rather middle of the road, but is very quiet, does a great job of cleaning my dishes and pots and pans.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I bought a Whirlpool refrigerator (dbl dr) from Home Depot and received it on August 4th. When I went to clean it I found that blood had spilled from a roast and had accumulated all around the inside of the plastic shelf seal. It was impossible to clean. Water just ran inside the seal and diluted the blood. Then, it leaked all over my kitchen. I had a serviceman here for another problem, sent by Whirlpool. He said hed try to get them to replace the shelf. Never heard from him again. I called Whirlpool today. Was told I could buy another shelf. Otherwise, they didnt care. Said it wasnt a functional problem. This is a definite health hazard. Whirlpool used to be wonderful. What happened? I have a dryer, washer, and water tank about to need replacing. Whirlpool wont see a dime from me. (Home Depot, either.) This has become a very bad company. Ive contacted the NY Dist. Attys office. Meanwhile, I have a fridge with a major shelf missing for the holidays and for the foreseeable future.

A disaster from start to finish. I would give it zero stars if possible. Purchased from Home Depot online in September, 2020. The first delivery was scheduled for October 11, 2020 at 7am on a Sunday. I spent hours on the phone trying to get the time changed. I was assured it would take place later. That didnt happen. The delivery service Temco called at 6:30a and refused to come back later. I had to make a new appointment. A week later they delivered the dishwasher, left it on the porch, refused to uncrate it or bring it inside the house, refused to haul away the old machine and stole the Dishwasher parts kit that I had paid for which delayed installing the dishwasher. After the machine was installed I discovered the machine did not come with a manual. I was told I had to download and print the manual.When I complained that I should not have to use my paper and ink to print a users manual after paying $800 for a dishwasher. I was promised a check to offset my costs. I was supposed to get a credit for my inconvenience but that never happened either. The first time I ran the machine using the one hour cycle water was all over the machine and I had to dry inside. I was told that I had to use a longer wash cycle so I did the second time. After 4 hours of washing, the glasses had a film on them, even though I rinse the dishes before putting them in the machine the dishes had some debris on them and water had still collected on the top of the glasses.Whirlpool sent a repair company out and the technician said motor pump and display control were faulty and it would probably be cheaper to replace the dishwasher rather than repair it. I was told I would get an email the next day telling me what would happen. I never got the email. During the week I called Whirlpool and Home Depot many times to complain about the faulty dishwasher, stolen parts and the promised refunds for my inconvenience as well as having to print the manual. Calling Whirlpool or Home Depot customer care will take hours and gets you nowhere. A week after the repair person came out I called the repair company to request a report as to what had been done and was told that they were coming back out the following Monday to fix the machine again. Monday, The repair technician came out and replaced the control panel but not the pump. The machine wont heat up to dry the dishes--the heating coil wasnt even warm after being on for 8 min. I am supposed to be contacted again for a 3rd visit!! I have a dishwasher that is faulty (read lemon) and Home Depot wont allow me to return it because their return policy is 48 hours after delivery. Whirlpool refuses to replace it unless the technician says it cant be fixed. Obviously, that will never happen. I should have repaired my old dishwasher rather than waste my money on this horrible machine. Whirlpool used to make fine products but those days are over. How does running a dishwasher for four hours saving energy? My old over 10 year old Whirlpool dishwasher was perfect until the pump broke. The dishes were always clean, dry and came out of the machine hot and sanitized. I am so disappointed in both Whirlpool and Home Depot.

Bought a dryer (wgd9050xw) 3 years ago. We bought a more expensive one than we had originally picked out. Every year its had to have a repair of same part. First year it was under warranty which tried to bill me so I had to dispute the charge. Charge was finally dropped. We just had it fixed again for third time in 3 years. Its a fire hazard because belt wears a pulley and basically melts it and gets belt hot. I just contacted Whirlpool and awaiting response.

I bought a Whirlpool refrigerator in February 2010 GS5VHAXWY00 side-by-side door ice maker. From the beginning, when crushed ice was used, the dispenser would freeze up. I had to remove the container to defrost. The container will not go back in place.Do not ever buy an indoor ice maker. I am out of warranty---very little help from Whirlpool customer service. They will be glad to send a service person.

Im very frustrated. I bought a Whirlpool Refrigerator for nearly $1300 in Sept. 11. It is a side-by-side Model #ED5KVEXVL00. The refrigerator side started warming up to the point that we noticed. We put a thermometer inside to confirm; it went up to nearly 60 degrees. We tried cleaning any dust underneath from the coils and even unplugged it for a while. The compressor appears to be the potential problem. Sears is not sending a repair guy for 2 WEEKS (It is a hot July here in NY)!!!!We are saddened that Whirlpool says it is out of the one-year warranty - so now we are facing the choice of a large repair bill or buying a new refrigerator. What a waste of money... Its not even 2 years and it needs service or a dumpster. Shame on Whirlpool for not standing up for customers when clearly there is something wrong with this machine so close to the warranty and so new. Sears and Whirlpool - youve lost me as a future appliance customer!!! :(

Less than 2 years after we purchased our whirlpool dishwasher, the rack started to rust. Now the tines are so soft they fall off. The last time we bought a dishwasher the Same thing happened, but after 15 years! They dont even have an option for that to be under warranty so it tells me they dont stand by their product. I will never buy whirlpool again.

Our Whirlpool Duet Washer pair is 2.5 yrs old. The washer didnt work at first, but a repairman found the problem and fixed it right up. They have not broken. The dryer has been fine and we have had them stacked for most of the time without any issues. My problem sounds minor compared to those others listed here, but this thing is ruining all our white or light colored clothes. They go in white, and come out covered with splotchy, dirty looking spots literally all over them! They werent that kind of dirty when they went in. It’s the oddest thing, like it makes dirt. Reading some of these concerns makes me wonder if it has a mold problem inside somewhere, and that is what is ruining our clothes. Tax return is coming and it is going. End of story.

We purchased our basic Whirlpool refrigerator model # WRT318FZDM05 from Lowes on September 13, 2019. We bought one of the more basic models available because we have owned higher end fancier refrigerators which have had multiple problems and not worked. So this is the 18.2 cubic feet top freezer model. About six weeks after owning it (conveniently just past the 30 day return window at Lowes!) we began to notice that our freezer wasnt freezing properly or making enough ice. There is only one control panel in this basic fridge so we turned it up. While this cranked up the freezer, the refrigerator compartment began to freeze its contents. So we had to choose between soft serve ice cream and refrigerated eggs and milk or hard serve ice cream and frozen eggs and milk! Finally after the holidays the certified Whirlpool appliance technician came out and recommended a repair with replacement of start device and control board. His report: Freezer not freezing, found the compressor turning on and off. The refrigerator was not even 4 months off the floor and the problem began when it was only 2 months old! When you call the Whirlpool number heres what they say: Welcome to the Whirlpool customer exp. For over a century weve believed in everyday care. Lets see how we can care for you today.Well, when someone calls with a very recently purchased refrigerator whose START DEVICE and CONTROL BOARD no longer work properly that person should be able to return the defective appliance and get a new one. Nope. Not with the Whirlpool experience. You are told that youll have to wait and see if those devices which are ten days away from being replaced in your new refrigerator will fix the problem. So basically NO do not buy from Whirlpool. Turns out a century of everyday care (??) hasnt taught them much about how in this century people need a refrigerator that works everyday!!!!

I recently purchased a Whirlpool over the range microwave. I especially appreciate the unit's strong exhaust fan. My previous microwave's exhaust fan was much less powerful. The unit's black glass and chrome trim look great! I am extremely pleased with the new microwave.

A Whirlpool dishwasher was installed by Skyline, a modular home manufacturer, and we occupied the house on August 21, 2014. The appliance never worked and Whirlpool sent repairmen 9 times over 9 months to either repair or determine if it should be replaced. It washed the dishes exactly 4 times in that time. Complaining to Whirlpool only caused a supervisor to scream at my wife that we were the cause of the malfunction. Nearly every part was replaced & they still refused to exchange it for a replacement new one. The modular home manufacturer received the same treatment appealing for us.

I bought a Duet front load washer and dryer set in January 2009 from our local Lowes. Spin cycle noise progressively got louder over time to the point we contacted our locally owned service company to check it out in June 2011. Cause is defective shell and spin tub, total repair cost $750. This was about the original cost of the washer! I contacted Whirlpool via e-mail (wait time via their phone is outrageous), they wont do anything. Out of warranty. Up until now, Whirlpool has had a good name with me. Not anymore. I will never buy anything Whirlpool manufactured ever again. (Maytag, Kenmore, maybe more brands.)American companys insensitivity such as this is what gives some of American industry a bad name and drives consumers away to quality foreign brands made in Europe: German, Swiss, Italian, Swedish,etc.Im going to take a hard look at Bosch washers to replace this Whirlpool piece of junk.

We bought the Whirlpool top loader washer and the drum broke down and after several attempted fixes it was replaced by new one as we were being financed through a business. So here comes the new one - same exact washer. Not only did it not clean well (normal soiling) then it goes to ul which means not balanced... not because clothes arent but because the thing that balances - it went only after a yr!! It would also keep filling draining again to no drain leaving clothes SOPPING wet... So very disappointed to say the least. What a piece of junk this washer is!! Its going to the curb tonight and being replaced by GE - NO MORE WHIRLPOOL AGAIN !!

Whirlpool washing machine was not a good buy at all specially after using it and seeing that over the years I had to incur high costs of maintenance. Over the months and years of buying Whirlpool front load washing machine, I had to replace motor twice, digital display twice, motherboard twice THAT TOO at a very high price every time something broke. This time the angle that supports the drum broke and Whirlpool says drum needs to be replaced. HOWEVER, after waiting a month company says DRUM IS UNAVAILABLE. Which means my machine has become absolutely useless just because Whirlpool does not have the spare. Whirlpool has a ridiculous track record with poor service and poor product quality. Manufacturing in one country and selling it in another WITHOUT SPARES is defective and poor service, totally unreliable. Wouldnt recommend Whirlpool to anyone.