We had purchased Whirlpool Side Kick Refrigerator/Freezer 8 years ago for our new home and had custom cabinetry built to fit around them. Once we moved in we were CONSTANTLY calling for repairs on one or the other. They fix it then the other goes out. They fix it then the other goes out. After 7 years of this we finally said, lets get a new set. We bought the same product because once again the cabinetry is built around these. We were 8 months into having new ones and the refrigerator went out. They came out to repair it. That is a joke in itself because you dont have much to choose from since its under warranty and they dont have anyone in the area to come out. Finally when they come out and fix it now our freezer is out and a repairman is due to come out tomorrow. We WILL NOT buy ANY product of Whirlpool and DO NOT recommend their products!!! VERY unhappy especially since these purchased together are well over $3000+!!!

In addition to that I find the HE rating a joke as it takes 2+ hours to run a load of whites despite it saying on the read out that it will be 1 hour and 4 minutes, it literally tears up my clothes. I have now gone through 3 sets of sheets, 4 towels, 5 baby onesies... How can a washer that doesnt have an agitator cause holes and shredding in a garment? I honestly dont know what to do anymore. It takes two days to do the wash for 2 people when I could get it done in hours with my old machine. And to think I spent close to $900 on this washer makes me sick! I want to go back to my old agitator type washer from Maytag!

Whirlpool microwave oven a few months old stopped working. Customer service center not helpful with prolonged holds (>30 minutes), no response to email, and amazingly no response to live chat. The 800 number was busy at one point for over an hour. When I finally did get thru, there was no coordination with local repair men, and a factory delay on the parts. I am going on 6 weeks without a functioning microwave and 3 kids at home. Thanks Whirlpool.

We purchased this dishwasher in June 2014 while putting home back together following fading of our home. Within 6 months of purchase the dishwasher was doing dry washes, and getting very hot touch. Whirlpool sent out repairman who replaced parts that had melted inside dishwasher and the control panel. This same thing happened 2 more times. A repairman came and repaired and replaced parts. In May 2016 it once again was running so hot that it burned hand when opened. Once again repaired but this time it started leaking from front dishwasher. When we talked to whirlpool they sent out repairman and assured us they would pay for any and all damage it had caused. They also replaced dishwasher with Maytag of our choice which they covered all cost. When installers pulled out the unit we learned the dishwasher had most likely been leaking the entire time, water damage up entire wall, cabinets ruined, countertops had been bubbling and separating from wall, floors ruined. We followed all instructions and had three contractors come to do estimates that were from 27,500-30,680. Whirlpool then sent outside adjuster because of cost. We have now received offer of 6700 and told we could take this or submit to our insurance company. Also we now have Mold in kitchen which they are aware of and we think the flooring is now rotting and breaking.

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

I used my self cleaning oven feature and the fuse blew, leaving my oven with no electric current. I had to replace the fuse at a cost of almost $300 two months after the one year warranty of the oven expired. The technician suggested I no longer use the self cleaning feature since it will continue to melt the fuse wire. The oven becomes too hot, so I have an oven that I paid for with a feature I cannot use. I would not recommend this product.

My induction cooktop totally failed to work two months after installation. Whirlpool sent a repairman who told us it was the main board. He also said he was unable to locate any of that part anywhere in his computer. We called Whirlpool via our store, Ikea. They apologized, asked for 48 hours to locate a part, then said they would replace the cooktop if they were unable to find out. Almost 48 hours later, they hadnt located it and denied any replacement option. The parts cost is over $800. The cooktop cost just over $900. Whirlpool reps would only read from a script of legal warranty jargon. Then they said they needed 5 to 7 days. We had a baby visiting - we needed our stove. To me, an apology would be replacing that unit if the part wasnt available, not a verbal statement. Fortunately, we had the phone # of a local Ikea manager who told us to bring the cooktop to the store as they had them in stock. They replaced it with a new one. Over the years of my long life, I have bought many Whirlpool products. Never again. I need a washer and dryer, and will not be purchasing any associated with the Whirlpool Corporation. Thanks to Ikea, though, for standing by their customers.

Both are Whirlpool Commercial quality. I got them free from my Co-Op. They didnt cost me anything. They have been here for years - at least 18 years. They have performed flawlessly. I would look for anything discounted. I do not have a problem buying scratch and dent items or last years models. I am not big into brand names and their claims. My sister has gone thru several Maytag appliances in just a few short years. I will not buy any front loading washer, its top load only for me. The dryer has to be electric because we do not have gas in my Co-Op complex. I have been lucky to have only two washer and dryer combos since I was a kid. My family bought a Kenmore washer dryer combo in the 70s that lasted maintenance free into the 90s when I got the Whirlpool set that I have now. I only need the basics side by side set ups. Even though I live alone I do a lot of laundry. Since I have had these commercial grade machines I am more leaning toward another set of commercial grade machines. They seem to be able to take more abuse/over loading than the fancy expensive machines.

Bought this 18 cu ft refrigerator this year. Only 3 choices for temp. Everything freezes, milk has crystals, ice cream is soft. Buyers remorse! Old ref was a Whirlpool. Wished I would have given others a chance.

We purchased a Whirlpool refrigerator (WRT5L1SMYF00) in April 2012. Within 2-1/2 months, items were freezing on the shelves of the fridge box. I called Lowes & was told to call Whirlpool. I did as suggested & they sent out their service co. tech, Turner Consumer Services. I had all the same issues as everyone else in these reviews. i.e., food freezing where it shouldnt or spoiling when the stat was turned down even one notch. The staff at Whirlpool was as uncooperative as is possible. They smiled and lied to my face during phone calls - anything to get me off the phone. During the next 4 months (till Nov.), techs came out 5 times, never having the part needed on the truck. Always, it was my fault somehow that my stuff was freezing. Their chosen tech service employees were rude, condescending and without knowledge. Five service calls, 3 parts replaced and numerous calls to Turner & Whirlpool got me nothing but stalling tactics. I, too, was told that their tech had to fail the appliance before they could consider replacement - all lies. The tech, when he gets here, says hes not allowed to fail the unit. On the 11th of Nov., I awoke to totally frozen-up coils which kept the fridge box from cooling. We had company here from out of town. We moved out the new fridge, moved back in our 21-yr-old unit and got through till our visitors left. Whirlpool has been completely unresponsive to my appeals for some relief from this fiasco. I continue to receive requests from Whirlpool to purchase an extended warranty. Really? My husband & I went out to Sears and purchased a GE & have had no issues with it whatsoever. We are older, on a fixed income, and can ill afford to purchase 2 fridges in 7 months, not that Whirlpool cares. Not only will I never buy another Whirlpool product, but I will warn everyone possible to not buy from them. In fact, my intention is to use every possible forum, Facebook, Twitter, any & all review sites here in KC, MO or anywhere to put Whirlpool down. I am, however, considering one more expense - a lawyer.

This Whirlpool Cabrio washing machine just does not do the job. It smells inside and does not get clothes clean, just normal everyday laundry. I usually have to put them through twice. It is supposed to be a water save, but I dont think it uses enough. I use minimal he detergent, yet you can see detergent residue on the clothes after they are washed, I think because there is not enough water running through to rinse clothes very well.

I purchased a 50 gallon Whirlpool water heater, model FG1J5040T3, in November, 2005, and have had the same experience as reported by the hundreds of others, whose comments I have been reading. Basically, pilot wont stay lit. I called Whirlpool, relight the heater, when it doesnt relight, wait to receive repair parts, call a plumber, and pay to have them install it, then repeat same problems. Each time going for a week or so, without hot water.After relighting the heater 10 times in the past year, and service calls, Whirlpool authorized me yesterday to return it to Lowes, and get a replacement. I need to hire a plumber to unhook it, haul it to Lowes, get the new one, and install it. It cost me about $300 to $400. Will the replacement be any better? I am considering just replacing the heater with one made by Rheem.

Whirlpool refrigerator WRT1LTZW00 - Bought refrigerator, works ok but makes noises that will wake you up in any room of the house. Had Whirlpool products for over 40 years. Why would someone make something that noises. Service came, said they all like that with new gas, cant do anything. Find hard to believe this was consumer tested. 6 weeks old, cant sleep with noise. Has anyone had same problem?

I purchased a Whirlpool refrigerator from Home Depot in Nov, 2013. Model is WRF560SEYWOO with water in the door and bottom freezer with ice compartment. This is a very small refrigerator for my very small space. I swear these companies program their appliances to break down exactly 1 month after the warranty is up. Thats what happened to me. Dec 2014 this horrible loud humming noise started. You could hear it out on the sidewalk! Then the door with the water just detached from the bottom and screws and plastic pieces fell out all over the floor. The day the repairman came he noticed all the rubber lining in the doors was detaching and huge chunks were falling off of it. He called to get replacement parts for everything and whatyaknow, all parts for this unit have been discontinued!This is what we did to cope with all these defects. The noise was caused by ice building up around the exhaust fan because the unit had stopped defrosting that area, so every 3 days I have to get out my hairdryer and melt the ice at the back of the unit. Next we MacGyvered the door so that it is resting on the freezer door. Next, he brought in some tape and taped all the pieces of rubber falling off my doors!! This frigging frig cost me $1,653.00!! I AM FURIOUS. Why isnt Con. AFFAIRS DOING ANYTHING ABOUT THIS?!

We have owned our refrigerator approximately 7 years. We have replaced this fan 3 times and now it went out again. The store we purchased it is now out of business. I am so flustered I do not know if we should replace it again or buy a new refrigerator, I can guarantee we will not be buying another Whirlpool. Their part runs about $50 but how do we know that is not going to go out again?

We purchased our Cabrio washer and dryer in 2012. In 2014 we had to replace the rollers in the dryer. Since then it makes a loud clunking sound and it has to go through at least 2 or 3 dry cycles to dry the clothes, sometimes more. The washer lid lock doesnt work very well anymore. Sometimes it wont lock so I cant get the clothes washed. It takes forever to get it to work. Ill never buy Whirlpool again.

I purchased a Whirlpool oven 14 months ago. I just paid it off 2 months ago. The oven stopped heating. I talked to Whirlpool... and basically because I did not purchase the extented warranty I am SOL. I will never buy a product from them again. Complete junk.

I have called and emailed Whirlpool numerous times, complaining about the fungal odor emitted by my Whirlpool Duet front-loading washing machine (model #WFW9400SU01, serial#CSW0416732). I did everything they suggested that I do to no avail. A customer service representative said that the only thing left to do was to schedule a repair with a Whirlpool service person which I did. He called me when he was on his way and asked me what the problem was, and he told me I would be charged for nothing because hed seen this problem many times before and theres nothing he can do. Please advice.

I love my Whirlpool LP Gas Range. Cooks great and bakes wonderful stuff. Also has a drawer under to hold pots and pans. Self Cleaning Oven. I do a lot of baking and I cook three meals a day. The burners are easy to clean off on top. I try and wipe spills up in the oven as much as possible, It has everything on it that I love, except it could have a plug in which would really nice.

I purchased this LOVELY top loader on May 19, 2012 - the lid is broken and wont stay up. I am 4 ft. 11 inches and I need a stool to reach the clothing at the bottom. Kind of hard to hold up the lid and scoop clothes with the other hand!!! Today, I discovered it is rusting from the inside out!!! From what??? Pulled it forward to clean the floor underneath and discovered it has rusted and corroded even on to the matching dryer - white finish!??! Guilty by association! AAAHHH!!! I wish I could upload the picture! Whirlpool and LEONs warranty - they have some explaining to do.

My last fridge leaked all over the floor. Mice were living in it also roaches. My landlord didnt believe me though Ive shown him several times. He didnt want to spend the money. Luckily his wife came over and saw how bad it was so she got a new refrigerator for me and it has been a blessing ever since. It is just the right size for my apartment.

My Side-by-Side Whirlpool fridge which I bought very expensive in Colombia one year ago had the glass shelves totally cloudy and foggy. You could hardly see what was inside. 8 technicians were sent through the authorized center to meet warranties to check the fridge. The first 7 technicians(!) did not have a clue of what the problem was. After many calls, they sent a supervisor who discovered the problem and finally, after 10 months of this battle, they changed the fridge for a new one. But guess what?! I received the new fridge 2 weeks ago and the new one has exactly the same problem. I am very disappointed and I do not know what to do at this point. Going through the same process again makes me sick but losing my money and all the time invested in this product makes me furious. Is there any way that Whirlpool can help me through this forum?

I bought a whirlpool washer from Whirlpool on February 27, 2011. Since then, they have come out and repaired the washer for 5 times. They have even taken the whole motor out, and replaced it. The last time they came, they said I would have to pay for the next time. Now, it has broken again, and I have to pay for a washer repair that is less than a year old. We bought the Whirlpool washer at Sears, and neither Sears, nor Whirlpool will stick by their product. We cannot afford another new washer, and to pay for repairs is a stretch too. Is there anything you can do?

We've had a of Whirlpool washer and dryer for well over 8 years now. The only thing we've had done to it during that time was to give it a "tune up". That was done by a friend and only took a half hour or so. I don't know exactly what he did to it but the "tune up" didn't require any parts. In fact, when my friend was finished with his version of a tune up, it was as if it were turbo-charged and our clothes came out cleaner than ever. The washer runs quietly, as far as washers go, and the capacity, washing options, etc. are perfect for a washer that gets a ton of usage.

I have had my whirlpool top loader washer 2/12 years. There are 3 adults in our household, but we do at least 1 load per day. During a spin cycle we heard a loud bang and then the washer starting spinning very fast. I called for repair and was told the cost was 500.00. Now I must buy a new washer as that cost is excessive and I see this is a common problem. This new washer will not be a whirlpool!!!

I bought this fridge 2 years ago. I had multiple repairs already. Now the side panel makes noise when you shut the door. Repairman told me it is the foam separating from the side panel. There is nothing that can be done. I also have extended warranty.

Purchased a Whirpool fridge 1 1/12 - after Sandy, used for about 1 month. Now ready to move home and was told ice maker bad?? Thank god we purchased warranty! I want to know why ice maker is bad regardless covered?

Bought in 2009 brand new set washer and dryer together at Best Buy. The washing machine in 2011 started its never ending problems. I’ve paid for parts & labor for the door lock sensor mechanism multiple times where I learned to repair that myself even buying parts and installing on my own last time... Then a drain pump went bad. Replaced that. Now a code f51 sensor to a motor rotor not spinning issue. Horrible. All the money and time in this unreliable machine is so awful. This thing also isn’t that great when it works too. Goes unlevel way too much having to redistribute and restart cycles all the time... Wish it washed better for the price and all the trouble. It is the worst machine. Has to be! Everyone I know can’t believe the fight I’ve had through the years with this machine. The company doesnt help you. Costly headache Junk machine!

Purchased a Whirlpool hot water heater from Lowes. Heater has 6 year warranty. Hot water heater is 1 year old and the pilot would not light. Contacted Whirlpool warranty department to what the failure cause. A new control was sent and replaced by a qualified journeyman plumber; still not working. Called whirlpool warranty department, told control valve must be faulty. We have gone 5 days with no hot water. I am not waiting another 5 days to get hot water. I am having the plumber take out this worthless Whirlpool heater and haul to the scrap metal business. That is where I should have sent it from the get go. Dont purchase a Whirlpool product. The money should be spent on a product that works and will last.

The Whirlpool hot water heater model ES80H123-45D from Lowe’s is a free replacement for a lifetime warranty unit that went bad after 8 years. First heater would heat to 154 degrees with a setting of 150. Very good. New one heats to 140 degrees with a setting 150 degrees. Digital ESM screen on heater reads 150, but the water is only 140 by my temperature test. I talked to complaint line 5 times in 7 days and was told to do various test, but the temp never went past 140. They replaced both thermostats and temperature still never past 140 with ESM reading 150. They first told me standard temperature was plus or minus 5 degree range. Then, they changed their minds and said it was 10 degrees. They are calibrating their equipment to operate 10 degrees less then their Energy Smart module reads to cover up a performance issue with their water heater. They say this unit will operate between 80 and 150 degrees—nothing’s said about a plus or minus operating range. I will buy a new temperature gauge to see if my old one is correct. It was tested against a digital one a couple of years ago when I had a new dishwasher installed by Lowes. The installers gauge read over 152 and mine read 154 degrees at the sink next to the new dishwasher, so it was close to accurate at that time. Whirlpool is happy with their under-performance.

I hate the thing. The grates are way too large, they are too heavy, and the fact the high is not a true high and the other three are different temperatures. The oven is awful. It half cooks. You cannot do decent canning on the thing because you only have one burner. This is a mess from the get go. Why in the hell do companies think everything has to have a computer attached to it? Computers and heat do NOT mix for Gods sake. A simple gas stove is sufficient to cook with. Take the computerized junk off and make a normal stove.

We bought a house almost 10 years ago and it included a Maytag washer and dryer. About 5 years ago, we decided to buy the Whirlpool front loaders. What a mistake as the washer shook every time it ran. After several warranty service calls and days of vacation waiting for the service, they finally said they couldnt do anything. During that time I had been in contact with Whirlpool and asked for them to take them back. Of course they wouldnt. I asked for a swap for top load washer and they would need to also replace the dryer to match: still no deal. It took a letter from a lawyer to make it happen. They also bought back the washer and dryer stands which covered the lawyers costs.So shortly after I received the Cabrio washer and matching dryer, the lid is very heavy which I believe the lid spring broke. I refused to call the service company as I did not want to go thru that crap again. I also know I can fix it myself easier and without all the drama. I keep waiting for another failure but so far all is acceptable. Whirlpool is not the same company as they were when I made my living doing warranty service for Whirlpool! 30 years ago they were the best in the industry.The Maytag pair was giving to our relative and they are still working flawlessly. Unfortunately Whirlpool now owns Maytag. This experience has cost Whirlpool replacing our kitchen appliances. As much as I want to buy American, I will go with Bosch or LG only.

My husband and I purchased a Whirlpool water heater from Lowes about three years ago. We have had trouble ever since! The pilot light will not stay lit. We have done everything imaginable to try to repair it. Every time I call Whirlpool, I get the same reply. They email me some instructions on how to repair this piece of crap. I dont understand how they can make a product that they do not stand behind. Whirlpool use to be a reputable company, not anymore! I will never buy another Whirlpool product ever! And I will tell everyone that I come in contact with not to buy from them either. I am also considering filing a lawsuit against them for making such junk! Do not buy Whirlpool water heater.

Im very frustrated. I bought a Whirlpool Refrigerator for nearly $1300 in Sept. 11. It is a side-by-side Model #ED5KVEXVL00. The refrigerator side started warming up to the point that we noticed. We put a thermometer inside to confirm; it went up to nearly 60 degrees. We tried cleaning any dust underneath from the coils and even unplugged it for a while. The compressor appears to be the potential problem. Sears is not sending a repair guy for 2 WEEKS (It is a hot July here in NY)!!!!We are saddened that Whirlpool says it is out of the one-year warranty - so now we are facing the choice of a large repair bill or buying a new refrigerator. What a waste of money... Its not even 2 years and it needs service or a dumpster. Shame on Whirlpool for not standing up for customers when clearly there is something wrong with this machine so close to the warranty and so new. Sears and Whirlpool - youve lost me as a future appliance customer!!! :(

I recently had the bake sensor go bad on my Control Panel of our Whirlpool Gold AccuBake Oven with microwave. Not a problem correct? WRONG! While the Whirlpool people were very professional in helping me (a shout out to them), the part I received was the wrong color. It was white; they called it a biscuit color. My oven is black. I have no idea what Whirlpool actually calls that color. Anyway, in my visit with them, I was informed the black control panel has been discontinued. Am I the only person that has a black control panel? This $280.00 part is now going to cost approximately $3,000.00 to replace the entire unit. Is there anyone that can direct me to where I can find a black replacement control panel? Way to take care of your customers Whirlpool. Solve this and I will give you a great shout out.

I purchased at Lowes and they say was without warranty. I have had all kinds of trouble. The pilot light was replaced in the burner easily because of recall. Now the pilot will not stay lighted unless you tap on the gas valve. Then as soon as the water temperature comes up, the burner and the pilot light go out. I went to Lowes for a new gas valve. They have one for natural gas of $58. They do not stock for propane. I have to purchase from Whirlpool which costs $228. Their comment is that it is more expensive to build another. They do not change offices any longer because of PSi difference bull crap. I purchased a Whirlpool gas stove 2 to 3 years ago and I had to purchase an LP change over kit to use it. This is nothing but a case price extortion. I will never purchase another Whirlpool product again and I would advise no one else either!

August 15, 2011 - We purchased a new Whirlpool Water Heater Model N50T61-403 for $398 from Lowes. We used their recommended installer (that was our first mistake!). He made the following installation mistakes: 1. He connected the hot water to the cold water & the cold water to the hot water. 2. He installed DRYER venting instead of HVAC venting. 3. He used flammable tape on the venting instead of screws. 4. He had incompatible metals touching near the gas line which can create an electrical charge & thus, a sparking situation. 5. He left us with a gas leak. 6. He did not install the screen that is supposed to surround the base of the water heater.7. He failed to strap down the expansion tank.These failures were discovered by an HVAC person who was in our basement to give an estimate on a replacement of the furnace & AC coil at the same time this genius was installing our water heater. The installer overheard the comments & literally... he disappeared & we never saw him again! We told all of this to Lowes & they were not phased in the least -- indeed, they didnt even seem surprised! They sent out a few other guys from the same company to correct the errors. So, it finally was installed & passed the county inspection & we had hot water again... for a little while. Within a few months the water heater pilot light would not stay lit. I was having to relight it once a week or so. After much arm twisting, we were finally able to get Whirlpool to send out a new pilot light assembly and pay for the installation. It was installed July 25, 2012. And.... it worked for 8 months. After returning from a trip on April 30, 2013, we went to take showers & the water was cold. The same problem was happening again... The pilot light had gone out while we were out of town & it will not stay lit & I have to relight it every 2-3 days.We talked to an assistant manager at the Lowes store where it was purchased. He talked to Whirlpool & Whirlpool said they would pay for the parts but not the service call which would be $149. I also learned today from the same manager that Whirlpool will not replace the product until they have replaced the same parts three times. Hmmmm.... Lets do some basic math here. $149 x 3 = $447! Thats MORE than the water heater cost! We believe that the water heater has been defective from day one & we also contend that their replacement part for the pilot light assembly is also defective (by design??). A pilot light assembly should last longer than 8 months!We are getting ready to build a new home within the next year. We will get to choose our supplier & the manufacturer of the appliances that will be in our home. Needless to say, Lowes will not be on the list. They keep saying, Our hands are tied. (Not buying it!) And Whirlpool will definitely be off of our list as their customer service is the worst Ive ever seen & their product quality is sub par. The other thing I experienced with Lowes was that when I tried to leave a review on their site for this specific product... twice... both reviews were rejected. The reviews presented the facts as Ive stated here, but because they showed Lowes & Whirlpool in a negative light, they were not posted on lowes.com. So, consumer beware -- their reviews are heavily screened so that the negative reviews rarely get posted. The consumer should be aware that the reviews on Lowes website are heavily screened & therefore do not equally represent consumers who have had a negative experience. This is an integrity issue.

Posted the following review of this oven on the Whirlpool website: How did this get 5 stars with so many complaints? Ive only used this oven once since installed last Sunday. It heated my kitchen up at least 3 degrees. I live in the South so evidently its not meant for southern summers. It does look nice but if Id known the fan blows such hot air out of the bottom, I wouldnt have chosen this one. Afraid if I use the self cleaning cycle, it will burn my hard wood floor. Probably why there are many complaints about uneven cooking and long to preheat since all the heat is blowing out of the bottom. I received an email saying it didnt meet their website guidelines and they wouldnt post it. Interesting?!

I had a full set of kitchen appliances delivered to me on December 11. The delivery crew installed everything but the microwave because we needed to have wiring done. Three days later an electrician came and upon opening the microwave box it was severely damaged. Whirlpool won’t replace it because I called one day outside their 48 hour window. They delivered me a damaged product – period. It should be replaced without question. Instead they want to send a “cosmetic tech” out to see if it can be fixed. I can’t imagine that’s a more cost-effective method for them. Completely unacceptable. I will never buy Whirlpool again based on their lack of customer service and common sense.

Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!

Ive been thru 2 new French door refrigerators with the icemakers in the door. Ive lost all of my food more than 6 times! There is a design flaw and they are no longer making the large models. I finally figured this out after reading multiple reviews from a lot of people with same/similar experiences. The compressor freezes then the loud noise all while the temp slowly lowers and ruining your food before you know whats happening. To add insult to injury... After ordering my THIRD replacement, their contracted installation company wont communicate with me to let me know when it will be delivered. Ive been without a fridge for 3 months! Calling them takes a full morning with hold times over an hour! I will never buy another product from them. I have a taboo LG French door with an ice maker in the door in my other home and it has been perfect for 7 years. Just be very careful and read reviews from people who have owned one for at least a year.

I bought the french door refrigerator Sept 2014. Recently the change filter light came on so I bought the filter. I read the instructions and then when I went to install it, the filter door would only open about 10%. I called Whirlpool and explained it was obviously a manufacturing error. They didnt care. Out of warranty. Everyone can make a mistake but when you wont own up to it and take care of it, that defines your character or lack of it. I think I will video the whole thing and put it on YouTube.

We purchased a brand new stainless steel refrigerator in 2013. Our 2 year refrigerator stopped producing ice and the freezer stopped working as well. We called Whirlpool customer service and they said they could not help due to 1 year manufacturer warranty only. We called another company (SoBellas) that charged us $85 to tell us that it is the seal system which should be covered up to 5 years by Whirlpool. The man showed me the Whirlpool refrigerator warranty on Google which states the sealed refrigeration parts are covered up to 5 years. There was no specific model numbers listed which gave me the impression this was a standard warranty for all Whirlpool refrigerators. I explained the situation to Whirlpool customer service including the 5 year warranty that is found on Google for everyone to see. I was told that our refrigerator model number did not qualify for that specific warranty. We ended up having to buy extended warranty for $350 on top of the $85 we already spent. This started July 24, we had to wait until August 10 for Whirlpools warranty company to see us. They checked it and said they had to order parts but he supposedly tweaked it to make our fridge run better.... It made it worse and it ended up completely breaking down. We had to buy ice chest and waited until Thursday August 27th for them to finally come back with parts and fix the refrigerator. I took time off from work once again due to our time slot being between 3 and 5 but the guy didnt even show up until 7:30. I could have worked my normal hours instead of taking more time off! The guy never once called to inform us that he was running late. We kept calling the company to make sure we werent forgotten. The guy told us that everything should be working within 20 hours or so, by Friday our freezer was still not working and no ice either, back to square one! I called Whirlpool customer service once again to explain the situation, nothing could be done. The next available time for them to come back out is September 17 for them to come look at our refrigerator. We have been stuck without ice and a freezer, buying food every other day waiting for our brand new, horrible Whirlpool refrigerator to be fixed. Will never ever buy Whirlpool brand again! Actually, we purchased all brand new Whirlpool appliances... Good luck to us!!!!!

I purchased a Whirlpool refrigerator with an ice maker exactly 2 years ago. It stopped making ice. I called a Whirlpool repairman and he said there was a leak in the freon tube. I should get a new one. I did, am trying a basic GE with icemaker.

Cabrio Whirlpool washer - I hate this washer. Had it for about 3 years now and it will not spin out and does not give a code. Called a service tech out and they cannot find anything wrong with it. The water goes out but will not spin. It sits on 20 minutes and does nothing. Will not buy another Whirlpool washer. Wanted a good washer and got a piece of junk. Will not recommend it to anyone else. Think Im going back to the old style.

The gas water heater that we purchased has been a headache. Pilot went out several times. When we contacted Customer service they informed us that we would have to have a new kit put on it. We ordered that and it worked a while and then we started having the same problem. Just recently we had to purchase another part and once again we have cold water. Fed up.

I purchased a Top load Whirlpool washing machine, replacing my old Whirlpool. I am so unhappy with this new one. I noticed that the water level are low...I had the tech here twice and they said that if here isnt any lights on the dash that the machine is working. I called the head tech, same answer. When I put the clothes in the washer I make sure that the clothes are evenly placed in the tub. The clothes comes out tangled and some not clean. Tonight I noticed that a pair of pant at the bottom of the load had white smudges/ I am so unhappy with this piece of junk/ I cant afford to buy another washer, so I am stuck with this.. I have tried all the different controls, still bad. I know the new machine are different than the old ones. I still believe that the water levels controls are not working. I have used my sister new washers and the clothes are not tangled and they are all clean.

I bought the Whirlpool WTW 5000DW1 washer and dryer to go with it. Within the first 2 weeks the plastic handle broke on the dryer. Ive been using the corner of the plastic handle ever since to open the dryer. The washer is the worst washer I have ever purchased in my life. The tub doesnt fill up over the clothes half the time. It is perfectly balanced on the floor but it always bounces around and you cannot open it to rearrange the clothes because they lock the lid. The only option is to try to hold it and wait for it to finish or start over by pressing the button for at least 3 seconds. I have had a few items get shredded by it and a lot of times the clothes dont get cleaned and rinsed properly. Even on 2 rinse option. Just the fact that it has a 2 rinse option is a big red flag. It is supposed to be a energy saver and water saver but that isnt true. If you have to wash and rinse the clothes twice because it has spots from the detergent still on the sheets, something just isnt right. Whirlpool shouldnt even put a product like this on the market. I have owned many Whirlpool products before this but this is the last Whirlpool product I will ever buy. Obviously Whirlpool doesnt test its products or care about quality.

Reading the reviews on this I figured I would chime in. Same problem with the top rack, its unfathomable how cheap this was constructed, since I have had old school dishwashers 15 years old without even close to a similar problem. Bought in 2012/2013 and have had this problem on and off the entire time. Looking at a new one definitely not a Whirlpool!

First F1 symbol on washer took 6 months to resolve. All we needed was new motherboard and couldnt mail it to us even though we could replace. It had to be an authorized person. Well we had one and they never put him in the system. Finally got that taken care of, 6 months of having to press pause and restart 5 times just to do one load. Arrrrrggggghhhh! Now water leaking out the bottom. Called again, on hold, then on hold again to be transferred to tech support. Yeah, right. No tech support. Talked to management, they could care less about us even though we have other products from them. Dont buy, they are lemons. We had ropes for 15 years and lasted through everything. Thanks Whirlpool, heres to losing a customer!!!!

I bought a Maytag front load washer on October 24, 2010. I have not been able to use it because it came damaged by the manufacturers. I contacted them by phone several times and it took them three months to send someone (A and E sears repair). Two months passed and I did not get the parts necessary or a replacement washer. I kept calling and finally they sent someone again in May 2011. They said they where going to order the parts because the new company was not going to replace the machine, even though it was already damaged. They said I would get the parts between three-five business days. I only got one part. A and E sent a repair guy again on the 22nd of June. This one said they needed the entire machine in parts and that he would order the parts. I called A and E one week later and they said they were waiting for the on manufacturer to send the parts (Whirlpool). The 26th and the 27th of July, I got the parts. On the 22nd of July, another repairman came and said we needed more parts. Today, August 16, 2011, I called Whirlpool and A and E and now they said the parts wont be here till after October 26, which by then I would have to pay for the parts and labor if I wanted it fixed because by then the one-year warranty would have expired. So here I am with a $700 washer, which was never used and they refused to fix/replace. They sold me a lemon!

I would give no stars for this piece of junk, Whirlpools energy efficient top load washer. I called 1 day after their warranty was up. It was actually purchased on Oct. 9th, 2010. The machine was leaving spots on my clothes from day one (was told it was my detergent)! The machine started making strange noises and not cleaning clothes. It was coming out worse than they went in the machine! I called on Oct. 10th, 2011 to complain. They told me my warranty was up! I had to pay $234.83 to order F7E1 activator and pay repair. The repairman told me that my machine was not delivered until Oct. 14th, 2010. It should have been covered on warranty!

I was very excited about the performance of the washer as far as reduced water usage and reduced electric usage. After about 6 months though, I couldnt figure out why a lot of clothes, sheets and drapes came out with streaks on them. Very expensive to replace! Of course, the business I bought them from tried to get me to buy all types of fixes that had nothing to do with the problem and therefore couldnt answer me why this was happening. I am not crazy about a lengthy lawsuit. I am crazy about hoping the washer dies so I can go back to a less fancy washer that did the job better than this expensive monster!

I have owned a French-door Whirlpool/Kenmore refrigerator for less than 3 years & all the lights start flashing fast when you open the doors. Anyone that knows anything about seizures know this can set one off. Turns out its a common problem with the LED lights & you have to replace circuit board at over $100.00 for the part, plus you may have to have it installed. Best to stick with a $0.99 bulb you replace every 5 years.

I count myself as lucky... my Whirlpool 465 Accubake Ceramic Cooktop stove was given to me. I have used it for 3 years. One day, out of the blue, the oven, which was in use, started clanging loud and jumping up and down. I started screaming & tried to cut it off & it would not go off. I ran to the panel box & threw the breaker. It also burned my food that was cooking. It did it several times. Then I decided to not cut the light on or touch the button to raise the temp. It has not done it since. I bake everything on 350 degrees and immediately throw the breaker. I am scared of this stove and plan to replace it. I will NOT buy a Whirlpool, anything. (washer/dryer/fridge/aircon)....once bitten...

We purchased the Cabrio washer and dryer due to the companys past reputation and our own past experience with Whirlpool appliances fully expecting to receive great performance and durability. We have had the pair just about 2 years and the washer started experiencing problems during the spin cycle. The unit would get out of balance easily and then it would stop without spinning, leaving the clothes very wet. Well, as our past experience had indicated to us the washer is usually much more reliable than the dryer, or thats the way it had been for us. So we only purchased the extended warranty on the dryer. Not being covered on the washer we located a local technician and he promptly diagnosed the problem as the transmission failed causing the noisy bearing and the failure of the unit to spin properly.Our tech quickly repaired the unit but this failure disappointed me to the point of contacting Whirlpool. Thats where I came upon this site and saw the multitude of complainers with the same type of problems and some that are worse than ours. Our purpose in this review is to add to the 1100 or more reviews that report the same kind of issues. We are now in the same mindset as the 1100. Will we ever buy another Whirlpool? Probably not, especially since it doesnt look like Whirlpool wants to stand with their customers to make it right. Customer support is just as important to us as the reliability we seek. I would much rather spend a bit more in the price than replace or repair the unit after the purchase. A little economics lesson for our friends at Whirlpool is that if you abandon your 1100 customers you will save about $440,000.00, but those 1100 will tell everyone they know of their problems with that product and as a result many thousands will never purchase a Whirlpool. So if we all influence 5 of our friends not to buy, then 1100 X 5 = 5500 people X an average price of $800 which equals about 4.4 million dollars of lost sales. Seems like a no brainer to want to stand behind your customers. We dont believe that any washing machine on the market should fail after a few months to 2 years. These products should be built to last many years and the maker of these products should have that goal.

It knotted my clothes up and twisted them to the point that clothes are so badly out of shape, hems are pulled out and some clothing torn. We no longer use the washer. Also, a very bad film all over our clothing. I have just tonight contacted the Whirlpool company as I have made numerous complaints to the business where I bought it to no avail. The day after buying and using once, the store sent a repairman out and he said use it on delicate. I have done that with the same results. I bought my washer in December of 2011. I am hoping Whirlpool contacts me. If not, we can contact the state attorney generals office, Consumer Affairs and our main TV station to make complaints. I do not have photos as I did not know I would need them. I am giving Whirlpool a chance to respond in hopes that a remedy is available. Maybe as simple as replacing the agitation device.

Ive always had a Whirlpool washing machine and it has been extremely dependable. I have not had any problems with my Whirlpool washer. A Whirlpool has came a long ways with their pricing. It was very affordable for somebody like me and I cant afford a lot but I could afford this. I was very pleased with my purchase and with the product. They havent let me down so far.

Our Whirlpool water heater needs a burner assembly replaced. Second time within the warranty period of six years. Parts have to be ordered, so you will be without hot water for several days to a week. The worst part is reaching them. Between my wife and I, we have almost 4 hours invested in sitting on hold waiting for someone in three different calls. They never answer the phone. They give an option to call back. They never call back. Im so frustrated. No Whirlpool products ever again. Im sitting at my desk, hoping someone will eventually answer the Whirlpool line. I dont even have the part ordered yet after two days of no hot water. Who knows how many more hours I will need to sit here and listen to this music on hold. It is incredible in 2021 a company can remain open while offering this kind of customer experience.

The oven works well. My complaint is that the glass door is very difficult to clean. Some kind of liquid got in between the panels and I cannot clean the glass without removing the oven door. Im afraid to remove the door as I may not be able to get it back on the oven. I have dirty glass I cant clean and that makes me unhappy. Otherwise the oven works just fine.

My Whirlpool Duet washer was purchased on August 2006. The first one had to be replaced as it flooded my laundry room on the first floor and the basement – not once but twice. When I was told that they would send yet another service person out to try and fix it, I told them it would be at the curb and that I was looking forward to filing a lawsuit. Then after being on hold for forever and getting the company that sold me the unit involved, they replaced the washer at no charge.From day one I hated this washer machine. If you failed to take the clothes out immediately after washing, they would get a musty type odor and I never felt the clothes got cleaned enough. Yesterday, I went to empty a load of laundry and it was soaking wet with water pooling in the bottom of the barrel. Today, I had a certified Whirlpool tech come and look at the washer and he told me to put it at the curb as the rear bearing is shot and needed to be replaced. He also told me not to buy another front loader and the cost of the repair would be approximately $800.Thank you to Whirlpool for manufacturing a true hunk of crap that, may I say, cost me $1300. I will make sure I tell everyone I know that your products are crap and I would rather wash my clothes by hand. I did call the WP customer service number and was told that this is unheard of and that these machines rarely have any problems. After just reading multiple complaints of the exact same problem, I now know that this product is inferior and the design of the bearing assembly is seriously flawed. A major recall is probably in the near future and Whirlpool is hoping that most people will just dump them before the recall is made public.

We bought a Whirlpool oven in Costa Rica. Wanted a good oven from a reputable manufacturer. Oven has had numerous problems over the past 2 months. Local vendor is worthless and trying to run out guarantee time. Whirlpool U.S.A. says it will not help with problems for products sold outside US or Canada. Fair enough. THEN DO NOT SELL THE WHIRLPOOL BRAND WHERE YOU DO NOT SUPPORT YOUR PRODUCT.

WHIRLPOOL MICROWAVE HAS HAD MAGNETRON GO BAD 3 TIMES IN 1-1/2 YRS! I bought a Whirlpool Microwave Hood Combo Oct 2009. July 2010 the magnetron went in it! December 2010 the magnetron went in it AGAIN! This time we had to pay the labor to have it repaired because it was 2 months outside the warranty period. We did not want to pay because we knew having the same part go twice in one year that something is wrong with it. Whirlpool told us that if it happened a 3rd time that they would most likely replace the appliance for us. Well....July 2011 the magnetron went AGAIN for the 3rd time! Whirlpool told us to take it to a licensed shop to have it diagnosed to prove that it was the same part as the previous two times, fax paperwork from the prior two times, and have the shop call in the diagnosis of the 3rd time. We did all that, and they told us they wouldnt do ANYTHING for us because it was outside of the warranty period! Well they knew that when they told us we had an opportunity to get it replaced! THE SAME PART WENT BAD 3 TIMES IN A 1-1/2 YR PERIOD OF TIME. We trusted that the Whirlpool representatives were being honest with us during those phone conversations. Whirlpool can not explain why representatives would give us hope of a replacement (although each conversation is documented by their login and employee ID number). So not only did I buy a brand new MSRP $619 microwave, I paid to have it repaired the 2nd time, and to have it diagnosed the 3rd time, uninstalled and reinstalled the microwave each time, the inconvenience of not having use of the appliance during each occurance, and the unbearable suffering of calling in to customer service and repeating the story over and over to each representative. My house is brand new (we moved in to it November 2009); we bought ALL our appliances from Whirlpool. All I get for an answer now is sorry. That doesnt help me any financially having to repair and now replace an appliance that has been in use for only 1-1/2 yrs! I have seen $39 microwaves from WalMart last several years, so what is wrong with Whirlpools manufacturing?! Customer Service is unreliable, untrustworthy, non-sympathetic, and insanely frustrating! My question for Whirlpool is...why cant you make a product that lasts better (better quality=longer life=healthier environment and happier customers)? Why cant you stand behind your products better? Dont you care about the impact youre making on us emotionally, financially, and environmentally? The model # is GMH6185XVS0 Serial # is TRY3111264.

Do not buy a Whirlpool fridge unless you like the sound of knocking every time it starts up. This has been fixed twice to no avail. I read about this before buying but thought it was an exception when it happened. Not so, it will happen to you & their fix will not work. Beware & heed this advice from someone who didn’t & not has major regrets. There are many other brands, buy them.

I bought a Whirlpool Cabrio washer on 11/07/10. I brought it home, hooked it up, turned it on and water came pouring out the bottom. I should have known better then, but I took it back and got another one, same model. I dont even have it 2 years and its locked up. I had a repairman here and was told it needed a new water pump ($200 plus). There are 3 adults in my home so its not like I use it hard. I am really disgusted. This is the 3rd washer I bought from Whirlpool in less than 10 years. I went on the Whirlpool site and voiced my disappointment and my problems with their washers. I was told they take pride in their products and I should have a nice day. Yeah, right, they dont have to drag clothes up and down the stairs and then to a laundromat when theyre in their 50s with a bad knee and back. Yes, I will have a nice day when I get that piece of junk out of my house. I will never buy anything made by Whirlpool again.

Cabrio washer broken lid, asked WP to fix warranty. They offered $250 off $500 Amana washer. Said just send me the new lid that would cost me $210. They said no. Asked if they would send me metal lid with hinges less than $100 they said no. Told them I was not going to spend more money with WP, my turn to say no. If you are wise dont buy WP products...

We bought this washer on 9/05/09. Recently, it sprung a leak due to a worn out seal that the repairman said would cost more to fix than just getting another washer. You would think this might be cause for distress, but I literally jumped in the air and clicked my heels with joy! This washer has been nothing but a pain. First of all, I have to pre-soak every load before washing or the clothes come out just as dirty as they went in. I would set the timer on my stove to let me know when the 40 min soak cycle ended so I could change it to wash. Then I reset the timer for another 40 minutes. I also learned the hard way, that using any kind of heavy duty setting would turn towels into a pile of yarn. This washer cost $998, and guilt is the only reason I didnt replace it years ago. Ding Dong the washer is DEAD!!!

About 29 Nov 2011, I bought a Whirlpool microwave, which model no. is magic cook 206 (mech). Sr No. CNF103400315, when we bought this item, we asked for the start up kit, but at that time they said that in grill microwave we dont provide start up kit but after a month when I again raise for start up kit, that time they give but in start up kit some item is missing and the sealed is open. So I kindly request you to take some action to the shop.

Same as others, We purchased a Whirlpool Cabrio Washer and there is a bearing problem (which seems to be the common issue reported). The washer is unusable at less than 5 years of age. The repairman told us its a bearing problem and its common for this to happen to the Cabrio. How can an Whirlpool get away with selling a defective product?

Got a simple error code E6 F2 on the display of my oven (only 8 years old). Called Whirlpool to schedule a repair. They told me there were no available dates for one of their techs to fix my unit. They referred me to 3 outside companies that wanted to charge me over $100 just to come out and take a look. One of the phone numbers to the companies they referred me to was a wrong number. I asked them to tell me what the error code means and they said they couldnt tell me with any degree of accuracy. (What use is an error code, then??!!) I checked all over the internet and different websites say it might be a control board (over $300 for the part) issue. But several techs also said that it is a crap shoot and could also be a Temperature Sensor. I called back Whirlpool to see if they could get me a deal on the part. But, guess what? They dont sell it anymore...in fact they dont even sell their own parts at all!! And, they transferred me to some outside company that refused to even give me part numbers, to avoid me shopping for a better deal (which I did end up finding on Amazon after number 6 below). I called back Whirlpool and after getting transferred around to 2-3 different people and wasting about an hour I finally got someone who finally wanted to just give me whatever decent service they could and they finally got me the part numbers of the 2 different control boards (Main Control Unit and Sister board that controls the locking mechanism, $367 and $140 respectively). Now I am faced with paying an Appliance Repair person over $500 for what seems to me is a BIG FAT LEMON of an appliance due to the sheer number of unsatisfied people that are having the same issue, have had it fixed, and had the error just return again. THUS.... WHIRLPOOL AND THEIR CUSTOMER SERVICE AND THEIR PRODUCTS JUST SUCK!! AND I WOULD NOT RECOMMEND THEM TO ANYONE! THE LEAST THEIR COMPANY COULD DO IS TRY TO HELP FIX THE PROBLEM, NOT EXACERBATE IT BY GIVING SHADY CUSTOMER SERVICE AND REFUSING TO HELP FIX THE PROBLEM!!!

I bought a brand new Whirlpool fridge early June with the extended warranty to have it shipped on my moving day on June 18. The team delivered and installed the fridge and told me to wait 3 hours before plugging it. I went and spent over 300$ in groceries only to find out the fridge does not work. I waited 24 hours, still not working. I had to wait until Monday to call the customer service because it is closed on weekends. I had to throw out all my food and order food all weekend which incurred an extra 200$. I called Whirlpool on Monday and was told a technician would only come on June 30th. 8 DAYS LATER!!!!I did some research and found a certified whirlpool technician myself who was able to come the next day only to find out the fridge has no gas and this is an assembly defect - WHIRLPOOLS FAULT. Whirlpool would have to send me a brand new fridge (These fridges are NOT TESTED?!). I was asked to call to arrange the exchange, I asked for compensation as I have already spent over 500$ and now would have to wait another week with no fridge and they refused to compensate....They told me I would get a call in the next 48 hours to let me know when I would get the new fridge and 3rd day later, still no call.I received a call on Friday to tell me they approved the exchange...Really now and would have to wait another week. That is over 2 weeks with no fridge, I sent a private message last week to Whirlpool, no answer, I spoke to customer service twice, they cant help me and do not want to compensate me. I have never been so frustrated and mistreated by a supposedly « reputable » company? WORST PRODUCT AND CUSTOMER SERVICE!!! DO NOT BUY!!!!

I purchased a Whirlpool oven and stove from hhgregg. The refrigerator is at best OK. The stovetop is easily scratched and looks horrendous after just a few months. Cooking controls are far too high for slow cooking. Customer service is terrible. Avoid, purchase another brand. You will be much more satisfied.

I purchased my Whirlpool refrigerator last Summer and so far I’ve had no issues, no probs! I love the energy efficient refrigerator along with its easy settings and options to use a ice maker. Wouldn’t trade my Whirlpool for any other brand!

I am very upset. I bought a Whirlpool range (model YGFE461LVS) 2 and a half years ago and today when I tried to bake a cake, the oven overheated (as if I had put it on broil) and although the display box showed that it had turned itself off, the oven kept heating and getting hotter and hotter, I had to unplug it. I feel like I have bought disposable appliances! How could I have such serious problems after only 2 years? To top it all off, this past week my fridge (also a whirlpool, model WRT779RFYM10) also started acting up. Water is leaking all over inside the fridge and the freezer. I have to clean it up everyday.

I purchased a Whirlpool Cabrio just over a year ago. The washing machine does not clean clothes! While under warranty, a service tech came out to look at it. After hearing the problem, he replied that it was a common complaint and that he could not fix the machine because the problem was that it is so poorly made that it simply does not work. His recommendation was to come to terms with the loss of a thousand dollars as Whirlpool would not rectify the problem.Whirlpool really showed their true colors when they refused to cover the repair tech visit. Whirlpool supervisor Kitty explained to me that customer advice was not covered under warranty and that we would have to pay the bill. Highlights of her argument were that we should just rinse the clothes multiple times and they would eventually get clean. She also mentioned that if the machine really did not work as described, we should have complained sooner even though it was still under the one-year warranty. Whirlpool will sell you junk backed with horrible customer service. Beware!

My wife and I purchased this Cabrio washer 6 years ago when we got our new home. I have replaced the discharge pump 2 times, and approximately 2 months ago, we developed a noise so loud it was like a jet engine landing. I called our appliance store and paid $100 for an estimate, only to find out it will cost $973.00 to fix it. When we bought this, I was told it will be the last washer we will ever need. Ill never use Whirlpool again and recommend no one else does, either. I wrote to your customer chat line and basically the reply was Sorry about your luck. I know Im not the only one with this issue.

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

We purchased our suite of appliances from Home Depot, this was a great experience. Unfortunately that is were it stopped. Our 1st refrigerator caught on fire in the electrical within the unit. We got a 2nd refrigerator sent to us and it came damaged. Then they sent us a 3rd refrigerator and it caught on fire in the electrical as well. Weve been dealing with this all since August 27th 2019 and here its now October 14th 2019. At this point I feel this model of Whirlpool is truly unsafe.

We have had this Cabrio washer/dryer pair for 8 years now. I didnt want to buy a front loader at the time since they were relatively new and was afraid to roll the dice. We saw the ads for this pair, the washer was the largest top loader at the time and didnt have the agitator (which I liked) so we bought them from Best Buy. I purchased the extended service plan (thank God) because we started having issues within the first month. First was the dryer, it was making a funny squeaking noise. We called to have it looked at and the tech said the drum was out of round. He ordered a new one and it showed up almost oblong. Returned it and got a second (same thing). We straightened it out and put it in. Two weeks later the control panel went out. Repaired it. Then the washer started. In the first 3 years of owning these we had called to repair the washer 4 times and the dryer 4 times. We could have got them replaced after the 5th call. Of course we had replaced all the faulty stuff and the pair settled down for 2 years.Now I have had to repair the washers control panel myself, the dryer sounds like it is coming apart and sometimes runs for hours, and now the washer cant wash in any cycle but delicate because the drum bangs around and cant self balance any more. What junk!!! I know people that have purchased low end machines and have had no issues for decades, maybe a random belt or something simple. I wouldnt buy another Whirlpool set if they were the last manufacturer on the planet. They should be ashamed that they didnt recall these things for all the problems they had.

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

I owned a Whirlpool Cabrio washing machine for 3 years (a two person household). The repairman just quoted $700 to repair a faulty center hub seal and bearing. This machine was not inexpensive. I expect more from a quality machine. A telephone call to Whirlpool resulted in two ten minute holds while being shuffled between representatives and each representative tried to sell me an extended warranty for another $289. Whirlpool should take full responsibility for this faulty product and not act like a telephone support center located in Eastern Europe. I am not pleased with this (lack of) resolution and do not plan to purchase another Whirlpool product.

I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

Purchased a Gold Series Whirlpool dishwasher, Mo. No. WDT720PADW2, From Maruszcak in Schererville, In. on 1-29-16. Approximately a year later door was replaced by Whirlpool because of paint problem due to faulty design. Replaced door is now peeling and rusting by exhaust vent also. Contacted Whirlpool and they will do nothing more. They said it was a favor the first time they replaced the door. They feel this is a cosmetic problem! I paid a total of $675.03, Their repairman would charge a $100.00 to look at it and another $235.00 for a new door. I feel this is a design problem and they should replace it with a new model, a refund would be better. Very unlikey, because Whirlpool does not stand behind their products. The line also includes Maytag, Jenn-Air, Amana and Hot Point. Besides this I have found plastic pieces that have fallen off! I had to use plastic ties to keep them in place. Dishwasher does not clean well. Have to rinse everything first. Products are bad, stay away from them!

Problematic... constantly out of balance... and will Not spin out due to this.. Sensors are very sensitive... have to unload and reload.. Most times have to wring out by hand.. Definitely a defect of these machines.

Whirlpool Cabrio Washer model WTW6400SW2, serial CU2372784 type 480: I have had this set for about 4 years now. First, I had to replace the motherboard. And now today, I found out that the center post seal was leaking and caused a lot of damage. I was told that it would cost around $300 plus to get it fixed. I have seen on sites that this washer is a lot of trouble and the makers need to fix these problems. Also, the washer sounds like a jet running. We need the makers of Cabrio to step up and fix these problems or refund us the money that we have paid out for this thing. We, the people who have bought these machines, need a lawyer and to start filing lawsuits against these people.

I have had my fridge (model WRX735SDHZ02) for 6 months now and it has never worked properly. All our food was getting frozen so we bought a thermometer to check the temperature inside the fridge and it was showing around 22F. The technician came 4 times and finally said that the fridge couldnt be fixed. He asked me to call Whirlpool since there was nothing else he could do. Every time I have called Whirlpool (6 times already) the wait times have been between 52 minutes to almost 1.5 hours. When I called customer service to tell them the technician said the fridge cant be fixed, Whirlpool said that I had to contact the technician again and schedule another visit. Whirlpool said the technician had to call them from MY home and tell them the fridge cant be fixed. I asked why couldnt the technician just call them now to let them know and why did I have to schedule another visit for that? Whirlpool said it was protocol. Makes absolutely no sense. In a nutshell, its been 6 months and my fridge is still not fixed and Whirlpool is not being helpful. If I could go back I would not buy Whirlpool.

Bought this washer NEW 4 yrs ago. Now sounds like a freight train in the house when in use. Whirlpool customer service is absolutely USELESS!!! They do not stand behind their product and refuse to acknowledge what is a common issue. PISS POOR and will NOT give me a number to a higher up. Absolute disgrace!!!UPDATED ON 10/28/2015: This is an update to my previous review. 1st, I contacted Whirlpool who was absolutely NO help whatsoever and the person I spoke to refused to put me through to higher ups on the food chain. I was wrong in my previous review when I stated that we purchased the washer & dryer 4 yrs ago. It was purchased in January 2012. Started making noise in 2014 and has progressively turned into the sound of a freight train. I also failed to mention the stench that comes from this machine. It has also got to the point where it quits with 10 minutes to go in every wash. Whirlpool did send out a Whirlpool certified technician, which they paid for, who stated this has been a common issue with these and other models of Whirlpool Cabrio wash machines. Says in his 3 yrs with the company he has seen and diagnosed over 30 machines with basically the same issues (bearings are SHOT) and Whirlpool refuses to accept any responsibility for the defective design and that, in his opinion, they shouldve never been released. He gave me an estimate of $257.13 to repair. We decided to go ahead with the repair and technician came out only to tell me that there has been a re-work in the design of the replacement parts as Whirlpool realized they were faulty. So I now have to wait for the NEW designed replacement parts to come in as they are back ordered. WTF does that mean??? Shouldnt there be a RE-CALL and shouldnt they accept responsibility for this??? This has been, without a doubt, the most disappointment weve had with any purchase of a NEW appliance or, anything else for that matter, in our lives. After reading through some of these same complaints Im wondering if this machine is nothing, but a money pit and whats going to go wrong next. We also purchased the Cabrio dryer at the same time and have had no issues with it as of this time, but I assure you, I wait with baited breath. Their customer service department is piss poor AT BEST!! Please, stay away from ALL Whirlpool appliances in the future.

I replaced my 12 year old Whirlpool double ovens with the current Whirlpool double ovens. The new 30 built in double ovens have been re-designed to vent the heat below the lower oven. The ovens come with a part that pushes the heat down instead of straight out. My built in ovens have a cabinet drawer below and after using the ovens just 4 times over the holidays I noticed the heat is damaging the finish. According to Whirlpools service center I should have checked on that before buying/installing. They told me to stop using my ovens, that this is a fire hazard, but they are not responsible. They do not have a solution to this problem. This is a poor design on their part. There is a disclaimer in their installation booklet that came packed with the ovens that the installer gave me. It says the cabinets need to be able to withstand the heat of the ovens. The cabinets can handle the heat of the ovens, just not the hot air venting directly onto the cabinets below the oven. Where does one find cabinets that can withstand 400 degree heat being pushed directly onto them? As a customer I did not have that information until after the ovens were installed and it was too late to purchase another brand.

Thank you Michael of Castleton, NY, for the posting about re-setting the microwave when it stops heating. Even if I have to do it once a month, it beats having to go out and get another one. And when that day inevitably arrives, guess which brand Im steering clear of?

We owned a Whirlpool Duet washer that went out in late December 2011. We bought another Whirlpool Duet washer on January 8, 2012. On July 31, 2012, it stopped working with the error message F24. In WV, Whirlpool contracts their insurance/warranty through ACE Appliance. We scheduled with ACE the next day. They came out on August 6, 2012. The repairman told me it would be 7-10 days for the part. The part was on back-order, so in reality it took 17 days before they returned. It was repaired on August 23, 2012. Today, September 17, 2012, the washer stopped working again with the same error: F24. Whirlpool will do nothing to replace the washer, even though it is less than a year old and we paid $900 for the washer. This is the second Whirlpool we have owned that has crashed. I have two small children (4 and 2) and I am due with number 3 in 3 weeks. While the washer was broken, I spent nearly $80 at the laundromat for washing only - I carried baskets of wet laundry home to dry. And now I get to repeat the same exact struggle less than a month after it was fixed. When asked, the customer service rep told me that no matter how many times it broke, all they would do is send a repairman. They never ever replace appliances regardless of the problem. I am unbelievably frustrated and I want to tell everyone that I possibly can to stay away from Whirlpool appliances! Do not buy them new! Their manufacturers warranty is a joke!

We got our Whirlpool french door refrigerator with freezer on the bottom (Model: GX5FHDXVY04) in June 2010. In the past six months, the refrigerator portion loses cooling and temperatures go to the 60s or 70s. We found out that by turning the unit off until it defrosts, it will work again for awhile. Weve had water overflow on our wood floor. When this happened the third time, I called Whirlpool to send a repair person.The person I talked to said it could be over $400 to repair and that it would be more economical to get an extended warranty for about $314, which I did. I did not receive the contract via email (it may have gotten lost in spam). The repair man came and said yes, this was a common problem due to a design flaw and that it needed a $6 part to make the water drain smaller - so that too much air didnt get in.It was May 1st before the repair could return to install it. This was done and we thought - expensive but its taken care of. Today, May 5th, the same problem happened and I have to throw away food again. Its the weekend and there is not a repair person available for two weeks - I got an order number and may request that the repair come sooner. To add insult to injury, I found out that the extended warranty is good only up to $450 and not good for any repair that might be needed in a year. Most of the repair goes to travel to get to Fairfield and labor and we have used most of the warranty already.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

My dishwasher was a $300ish model from Lowes. It is over 5 years old and has been reliable for a single persons use. It is run about once a week on average. Early on I had problem with it not cleaning well but that was the fault of one of those no leak supply hoses that restricted flow...fixed that. Would I buy again? Yes.

Whirlpool Cabrio - Our washing machine just started leaking water with oil underneath. This would be our third repair since purchasing this machine but it doesnt sound like a repair is possible or worth it. Its too bad we cant go back to the old models. They definitely lasted longer with no problems. Companies should make the older models bigger and forget about the front loaders and newer models without the agitators. Too much shaking in the machine causes too many repairs!

It washes everything well except the interior of the washer. And the filter is a pain also even when we rinse the dishes beforehand. The buttons are a pain in the ** to see without all of the lights on at night.

This is the noisiest refrigerator I have owned. The compressor is so noisy I have to turn the TV up to hear over the fridge in the kitchen. The compressor runs almost constantly, they say thats to make it more efficient. I have called whirlpool and all they say is that it is normal. This unit replace a older Whirlpool fridge that you had to put your ear against to hear it running. It is now on our porch for cold drinks. This will be the last whirlpool product I purchase.

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

This is an AMAZING dryer. Probably the best I've ever used. My husband & I live in a mobile home so our main reason for purchase is the fact it is VENTLESS & it's compact. The dryer is so quiet. You can hardly hear it with a tv going. It doesn't take any more time to dry than another modern dryer. The end result are damp clothes, however there is enough steam and heat left in the bin at the end of the cycle to where if you fluff the clothes they'll be dry in a matter of seconds. The dryer acts as a dehumidifier by capturing moisture from the air it uses. All the features are up to date and easy to figure out. It's worked extremely well since we've had it and I'm happy to say we LOVE IT!

I purchased my Whirlpool French Door Gold Series fridge for $2179.00 in November of 2013. We just had moved into a new house and wanted a fridge that would last a long time. In the past couple weeks the freezer has stopped freezing and after calling Whirlpool I was told I was out of luck and would have to pay full retail price to get the problem fixed. This will be the last Whirlpool product I ever buy.

In 2008, we purchased a Whirlpool Gas Water Heater from Lowes. Three years later the tank started leaking (this water heater had a 6-year warranty). Per Whirlpools instructions we were to return this one to Lowes for a refund (in hindsight we should have taken the money & went elsewhere to purchase a better brand!). As our plumber was removing the leaking heater we went to Lowes to purchase a new Whirlpool Water Heater upgrading to one with a 12-year warranty hoping that this one would last, it was advertised as the BEST one Lowes sells! After our plumber swapped out the heaters we returned the leaking water heater for our refund (remember this one had a 6-year warranty & only lasted 3 years).This past June (2015) our water heater stopped working, turns out the thermocouple went out which shuts the gas valve off. Called 5 plumbing companies in the Metro Phoenix area, not a single one would work on it! We researched the repair, called Whirlpool & was told that this water heater was out of warranty. Wait a minute! This one has a 12-year warranty & it is only 4 years old! Whirlpool told me that it is a replacement water heater so the warranty for this water heater is only 6 years (from the 2008 date of the purchase of the first water heater). It didnt matter that the replacement water heater was a different model & was more expensive than what was refunded to us. We replaced the thermocouple ourselves & got it going again. Last week it started leaking, called Whirlpool again got the runaround again, called a plumber who replaced it with a new Ruud for $1000.00 (Water heater + Labor).We went back to Lowes to try to get their help resolving this, the store manager said this was a Whirlpool warranty issue. We ended up taking the junk Whirlpool water heater to a recycling facility and getting $2.50 for it. Bottom LINE!! READ THE REVIEWS, THEY ARE TRUE!!! There was a class action lawsuit with a settlement of which I never received a notice for, I read about it online this summer, but it was too late to opt in. Dont waste your money on Whirlpool water heaters, no one will repair them, Lowes wont stand behind the products on their shelves, they get your money & hide behind the manufacturer & Whirlpool has very nice script to get you off of phone! Whirlpool used to be a trusted brand (do your research, I think they are the manufacturer for certain store brands! ). Our new Ruud water heater has a faster recovery than either of the Whirlpools that weve had; the drain valve is brass, not plastic like the whirlpool, it is overall a much higher quality.