Whirlpool Gold Convection Oven - I bought this new oven, cleaned it once. The bottom cracked where the spills had been. Since Id had it only two months, repair tried to say it was only cosmetic but had to replace it. Next time I cleaned the oven for multiple spills, (a year later) it cracked again, giving the bottom a shattered look where the spills were. I only cleaned it once and the bottom is ruined. I dont expect Whirlpool to stand behind this, but I agree these Convection Ovens require a Class Action Suit because they are selling faulty merchandise. Period.

I love the brand. I just do not care for the lock lid on all the new washers. I could do without it. I do not have kids to worry about getting hurt. Im looking into finding a brand without a lock lid. I just replaced one before this one. For the lid breaking.

Mold in my dishwasher right after having washed the dishes!! This is the first time I have seen the mold on the racks (lots of it!). However, my neighbor also has a Whirlpool and complains of the mold all the time. Also, my dishes often do not come clean. I would not have purchased a Whirlpool, but it came with the house, three years ago. Therefore, I do not have a receipt for it.

I have a kitchen collection of Whirlpool products, not even 2 1/2 years old. I have had nothing but issues. Microwave was completely rebuilt within few months, refrigerator and freezer multiple issues. Latest is the freezer stopped working, now my good is ruined!!! Wont always make ice in the icemaker. Already had to replace freezer door because it was warped and the seal didnt work and now my dishwasher isnt working!!! **!!! I waited 20 years for a new kitchen, finally got one and did extensive research thinking I was safe with whirlpool. I was wrong. So now what, what happens when the warranty runs out, Im screwed. Shame on you whirlpool for putting out crappy products and doing NOTHING to try and fix this!!

In less than a year my gas range required a new knob because it froze in place. They covered that but not the 4 new knobs since. I must clarify, its not actually the knobs but the thing underneath that my husband has had to replace ever since to our expense and time. Also in less than a year the paint under the knobs totally fell off. We contacted them about that and the reply was paint wasnt covered under warranty. Obviously they used heat resistant paint on the range top because that is perfect condition even with the constant cleaning, but the angled front where the knobs are I had to sand and repaint, not a good look for the stove. They really couldnt have just used the heat resistant paint for 2 1/2 farther? Just horrible quality and worse service. I used to be devoted to Whirlpool but since buying my new refrigerator - Samsung 100 percent from now on!

Less than 2 years old; a loud chirp began and the water dispenser stopped working, along with the ice. Repairman came out--ordered a part. One week later another repairman; another part. One week later another repairman--couldnt fix the problem. By now no cooling in the refrigerator at all. Tech line has to review the findings. Have heard nothing after nearly 3 weeks without a fridge, ruined food, and no ice other than my back yard!

We purchased a Whirlpool Duet Sport Front-Loading washing machine December 5, 2006. Approximately six months later, the machine would not come on! Service determined the motherboard was faulty. Since it was under warranty, they replaced it. We continued to have the same issue with turning the machine on. The technician instructed us to hold the start button down for a minute or unplug the machine to reset it. The problem persisted. Now, we are told it needs yet another motherboard. Cost - $500! We paid about $650 for the machine! (The manufacturer only offers a one year warranty on the motherboard) What incentive do I have to purchase this part? After all, Whirlpool only warranties it for a year! That in itself, tells me they cant guarantee the quality of their product.

My landlord replaced our old Whirpool topload washer with a Whirlpool HE topload machine last year. Looks sleek, lots of settings BUT IT DOES NOT GET CLOTHES CLEAN - not on any setting, not if loaded as recommended or under-loaded, not if I use more or less detergent, and not if I follow all the tips for getting rid of residue. This machine so under-performs I have to spot clean my clothes AFTER I was them. And were not talking deep dirt or grime here, or things that need special treatment, Just ordinary dirt dirt, to which the machine adds gray streaks of dirty water residue. Thank God I didnt buy this turkey for myself -- I will NEVER buy one of these machines. I did two small rugs today and they came out dingier than they went in. These machines should be recalled. If I could give it less than one star, I would.

Whirlpool Gold Refrigerator Control Panel Failure - This French door refrigerator with freezer on the bottom was purchased new in November 2008. This August, the refrigerator stopped cooling. I contacted a reputable local appliance company who diagnosed the motherboard was not functioning on the appliance. They ordered a new one from Whirlpool and replaced it. Forty-five days later, the replacement motherboard stopped functioning. When I contacted Whirlpool directly to inform them what was happening, they continually stated that the appliance company was not part of Whirlpools approved appliance technicians, and offered no assistance in guaranteeing the problem will not continue to happen. I am extremely disappointed with Whirlpools customer service and unwillingness to guarantee their products. A 3 year old refrigerator should not stop working.

Whirlpool Cabrio Washing Machine F1 code - We have had this washing machine for over 6 years now, and ever since our 3 year warranty time was up, the washing machine will only stop, and display the F1 code as soon as the wash cycle has completed, with 23 minutes left. To start off, with this problem, it is causing me more water, and electricity that should not have to be wasted if the machine worked properly. I called the place where I got the machine, and was told to give Whirlpool a call. I did this, and was told that there was nothing that could be done, and if I would like to schedule an appointment for a tech to come out and work on it, they could do that. YES, I would have to pay for it. Needless to say, the washer has been doing this for over 6 years, and if there is a way to get it fixed WITHOUT having to pay for the repairs, that would be wonderful.

Purchased this dishwasher in January 2012, and it stopped working in May 2015. We replaced thermal fuse a year ago and just had to replace the control panel. It worked for 1 day and through 2 wash cycles, but during the 3rd wash cycle, it failed to drain and no power again, which is the same problem we had before. We opted to also replace the control board, just to be safe. Lol. What a piece of junk! Whirlpool is a pathetic excuse for a company, and, judging from others experiences with the customer service department, we will not bother contacting these ** since they clearly have no interest in providing any service at all to their customers. I have had many other lower end dishwasher models, and all of them worked well past the 5 - 10 year mark and never stopped working or required any service. I WILL NEVER PURCHASE ANOTHER APPLIANCE FROM WHIRLPOOL AND HAVE SPREAD THE WORD TO EVERYONE I KNOW. Good luck, Whirlpool. I do not expect they will be around in 10 years. Lol. Do not give your hard earned money to these idiots for the junk that they peddle, and please let your local appliance dealer know why you wish to purchase any other brand BUT Whirlpool. Consumers are not stupid, Whirlpool! You are ignorant for banking on that and should be shut down for your unfair business practices, not to mention misrepresentation of your despicable products.

In remodeling a house, we got all Whirlpool appliances for the kitchen, right when the lockdown started our freezer went out, 8 visits later from a local repair person, Whirpool will not honor the warranty and get us a new fridge!!! They just want the repair guy to keep replacing all the parts he has already replaced, the repair guy is beyond frustrated with Whirlpool and their crap!!! Never again, totally lost a customer here.

Whirlpool Refrigerator: Model # WRT111SFDW - We bought this frost-free frig. in Feb of 2016 and this Feb. before the year was up, it started freezing up. I called the Co. and they sent a young man to my house to fix it and he thought he had. Well 2 wks after that it started freezing again and I called the Co. again and the same thing happened again and this was after my warranty had expired. Well then this young man came out and replaced the fan and a heating rod I believe to help it to stop freezing. Well 2 days ago it started freezing up once again. Im disabled and live on a fix income so now Ive got to figure out to get me another frig. And it WILL NOT BE A WHIRLPOOL REFRIGERATOR. But kudos to the Co. and the young man for trying to fix it even though it took 3XS and still not working.

We bought a new brand Whirlpool, ice berg, 2 door refrigerator in 2006. It worked fine for 6 months and then started giving all the problems. Until now, we have repaired it at least 10-15 times with company servicemen and also private repair shops. We are just so tired and frustrated will all that we have gone through because of this fridge. Today, the main door just came out and it is probably the 16th incident. We are hardworking people and take a lot pleasure and find lot of happiness in buying something new. It took us almost 2 years to save money for this new fridge with cost us about Rs. 20,000. But I should mention this that we have already more than Rs. 10,000 in repairs.I am sure this would just be another email in one of your inboxes but wanted to write this and convey the message that we are hurt. We do not want to take any legal actions as middle class men in India do not have the resources to do that. But I would surely not buy anything of your brand going forward and would not suggest anyone for it. Writing this in assumption that you understand the pain middle class men goes through to but something worth Rs. 20k and spends another Rs. 10k for repairs. We had high expectations from your product but that was not to be.Following were the problems we face in last 4 years: 1. Refrigerator not cooling (5-7 times); 2. Top door broken (1 time); 3. Main door broken (1 time); 4. Water leak problems (5-7 times). I hope someone will read this and forward it to concerned department.

Had a Kenmore - I was told it was made by Whirlpool. It did a much better job of preventing wrinkles on no-iron clothing. Also, I liked the dryer shelf for drying pillows, tennis shoes etc. I have been told there is a shelf for mine but has been backordered for months.

Bought this model from Bad Boy in 2006 and just after the warranty ended the problems began. We kept getting the F1 error code so with a little internet research we found it was a known problem with Whirlpool. I contacted them and was told they knew nothing about this issue being nationwide, however I emailed them copies of the complaints and responses. They sent out a technician who had to replace the motherboard free of charge. Next issue was a loud noise coming from washer sounding like a jet plane taking off. Hubby ripped machine apart to find the bearings blown apart and in tiny pieces. We ordered new ones and also found that when the new ones arrived they came with a tube of grease and a sealer to use so water would not get in later and cause more problems. Funny there was no sealer on the original bearings.Next the lid lock finally failed, ordered a new one but did NOT install it back into the machine, now it sits beside the machine. In case it fails again we will have total access to the laundry this time. Finally the UL error code keeps coming up. I refuse to put any more money into this machine again so I am allowing hubby to fix it if he chooses, whichever way he wants as long as no money is involved. So right now we have bungee cords holding the suspension rods tight to help with the uneven load code coming up all the time. Personal thoughts - DO NOT BUY WHIRLPOOL washer/dryers. They are crap and the company just does not care and they try to lie their way out of repairs if people have not done their homework.

Lu ** is a mgr. at Whirlpool customer service. Shame on you for the way you spoke to me. Then giving me a joke # to call... Karma sucks is all Ill say to you. I have to wait on the phone to speak to anyone is over 30 mins. Just to get pushed off to the side like I dont matter. Im trying to get help to have mine looked at to pass the time for another Whirlpool to come to me! Mind you mine didnt last 4 yrs. Yes I was trying to buy another Whirlpool but after this sloppy customer service. You dont need this stress... Stressful enough that these washers dont last anymore. Ya GE AND MAYTAG ARE LOOKING BETTER AND BETTER.

Overall??? Ive owned this Whirlpool side-by-side refrigerator for a year now. Love it except for semiannual cost to replace the filter. My brother recently installed the same model in his motorcoach. Yes I recommend this appliance.???

I will never buy another Whirlpool again or recommend them to anyone, and discourage anyone from buying one. I bought a Cabrio washing machine just over 2 years ago and yesterday I received an F51 error code. The manual says that this code requires a technician to come a check for repairs. Well, before I do anything I google the problem, and lo and behold there are thousands of complaints about this issue with the Cabrio models. Some saying that what needed to be replaced were a control board ($280) and a rotor (unknown amount), not including the price of labor. Some said that Whirlpool knows about this problem and they covered the parts and repair. This didnt get my hopes up, but I called customer service and of course they said that there were no reported issues with the model and that what I found on the internet was probably an older model. Of course! The lady on the phone told me that they would not cover the costs and it would be anywhere from $300 to $500 depending on the route I wanted to take. That is a 1/3 to 1/2 the price I paid for the machine. This is ridiculous! I am tempted to just get rid of the washer and go with a better company that actually cares about their customers. This error code was definitely something they know is a big deal if there was nothing I could do about it other than call a technician. I paid almost $1000 for a machine that has barely lasted 2 years before I have to pay money to have it fixed. Not a company I would ever purchase anything from again!

Whirlpool Cabrio Platinum Option - Very stylish. Well built - very solid and heavy constructions. Full features from quick wash to sanitary wash, very energy efficient, steam setting on dryer for touch-ups. Quick loads, etc. We were looking for a washer and dryer set that would accommodate large quilts and blankets and still have the flexibility to handle small and delicate loads, and be energy efficient. The Whirlpool Cabrio Platinum Option is solidly built and very sturdy. It handles small and large loads and is very energy efficient. Both the washer and dryer handle sheets and pillowcases without a problem. Wed recommend them to anyone.

I bought a Whirlpool water heater in 2009. I paid $588.46 at Lowes. Turns out it is in a class action lawsuit for faulty thermocouple. I was given a coupon from Whirlpool for 2 new thermocouples as part of the class action lawsuit. The thermocouple goes out on it every 1-3 months. You never know when youre going to have a cold shower getting ready for work in the morning. I literally could have bought a new water heater for what Ive spent on thermocouples the last few years. The last two times it went out, I had to replace it twice within 1 day. Im sick of replacing it and have decided to install a new hot water heater. I am disgusted with Whirlpool and tried to contact them about it but have gotten no response. I will never buy another Whirlpool product and would not recommend them to anyone!

I purchased a Whirlpool water heater and after working fine for about 2 1/2 years, I began having problems with it staying lit. I dealt with troubleshooting beginning in January of 2012 and finally in March of 2012, I was sent some replacement parts. The unit worked fine through the summer and once the weather started getting cold in October of 2012, I began to have problems with the unit again. After a couple of months complaining and threatening to file a BBB complaint, I was sent all of the parts left to change on the water heater. And I was told after the parts were changed if the unit still did not work, that it was probably a venting issue and that I would be responsible for that issue and the unit was not defective. I received the parts on 12/04/12 and they were changed out the same day. Now the unit will light when I hold down the button to light it but once I let go, the pilot light goes out. At least before changing out the parts, the unit was able to be turned on and sometimes it would work and other times it didnt, but now it will not light at all. This is very frustrating because the unit is under warranty and Whirlpool has for an entire year fought me tooth and nail just to send me the parts for the unit, only for the unit to still not work. I have a family and it is discouraging to not know when you are going to have hot water, having to constantly fix the unit or to call Whirlpool to troubleshoot and finally for the unit to still not work after replacing the parts. It looks like I will not have any hot water at all now.

Purchased my first Whirlpool refrigerator, model WRF989SDAM00, in 2012. Six service calls later, Whirlpool replaced it with the same exact model. I am now on my 4th service call with the 2nd refrigerator because of dripping ice maker, fan going out in freezer, condensation continually dripping on everything in the refrigerator. Finally, last week, I had enough & wrote certified letters to Whirlpools corporate offices, the service company they sent out to fix it, which was a nightmare by the way and the Better Business Bureau. I am still without a working refrigerator after two months!!!This is two lemons that Whirlpool has sold me in less than two years and the service has been horribly unacceptable!!! I am at my wits end. Today I wrote to the Attorney General. Whatever you do, DO NOT buy this model refrigerator!! It has been a nightmare!! !

I just wanted to post a quick response to a problem that so many people are having with their Whirlpool FG1H5040T3NOV Hot Water Heater. The biggest problem is the Pilot Light Wont Stay Lit. Ive had this water heater for many years now (since 2005) and two days ago we didnt have any hot water. I checked the heater and found that the pilot light was out and that when I lit the pilot light with the igniter, it wouldnt stay light. This could have been a number of problems causing this issue but heres what I did to get it fixed. I looked around on the internet and saw that many people had this same problem and several years ago Whirlpool gave out warranty replacement upgrade kits to fix it. I called Whirlpool support, gave them my serial number and mentioned the upgraded kit. Unfortunately, my 9-year warranty expired a few months ago and I am no longer able to get the upgrade kit for free. Apparently this upgrade kit was part of a settlement for this water heater that was sold through Lowes. The upgrade kit has a few enhancements including an adapter to allow the use of a standard right hand threaded thermocouple as well as a larger pilot light window and added safety thermal switch. This is definitely an improvement over the old.Anyway, I looked at Lowes website for this upgrade kit and their description and internal part number is slightly different but it is the same thing as confirmed by Whirlpool. Whirlpools part number is 6910813 for the conversion kit. Lowes calls this part American Water Heater Company Gas Enhancement Kit 5040T NG. This kit is only $35 which isnt bad. So, I went to Lowes, purchased the kit. The instructions are included and are even good for a novice. It took me about an hour to complete the changeover. Youll need to remove the old burner and orifice to use them on the new kit. I then checked for gas leaks. I lit the pilot and when I turned on the heater, the burner lit right up. All is good now!

Whirlpool refrigerator WRT1LTZW00 - Bought refrigerator, works ok but makes noises that will wake you up in any room of the house. Had Whirlpool products for over 40 years. Why would someone make something that noises. Service came, said they all like that with new gas, cant do anything. Find hard to believe this was consumer tested. 6 weeks old, cant sleep with noise. Has anyone had same problem?

I bought Whirlpool Dishwasher from Lowes. This is just 2 years old. Model number is WDTA50SAHZ. This is gently used Dishwasher. Suddenly it stopped working. After water fill up, dishwaher is not working. I thought whirlpool is superb brand. Now its waste brand. Do not buy whirlpool dishwasher.

Bought this dishwasher (Model No WDF530PAYB3) in 2013. First the plastic latch for the dishwasher detergent door broke. Then, the paint on the face of the door started to bubble, peel, and now is rusting. Next, the heating element broke. Lastly, it started leaked on my wood floor causing damage. 2013-2014 I bought that Dishwasher, Micro-Hood, Stove, Refrigerator, Washer, and Dryer all Whirlpool. All the kitchen appliances were Whirlpool Gold. They would not fix their product. Offered a discount on a new one as if I will ever buy Whirlpool again.

It was horrible! I paid $568 for a Whirlpool dishwasher from Lowes in 3/09. The Clean light flashed, then stopped and flashed again. I didnt buy an extended warranty, because I felt Whirlpool was a great company. I had A&E Factory Service come for a service call, paying $70 later w/ tax, only to find out that the heater is no longer working. It would cost $216 to fix it, and we had to remove the dishwasher. Why bother for the total of Todays service call and the repair, when I could buy a new dishwasher? It cost $568, and it lasted a little over 2 years! It was horrible. Theres no warranty and no help from Whirlpool, because I didnt buy a warranty. Guess, my dishes will air dry, and I might as well do them myself!

Whirlpool Cabrio washing machine is less than five years old. First repair was replacement of control panel (under warranty). Second, third and fourth attempts to fix the out-of-balance problem which continually caused the machine to shut down altogether (even a small load) left my repairman totally frustrated after replacing most of the parts, finally telling me it just cant be fixed! What? I paid over $1,000 for this machine in Oct. 2007 and expected it to last many, many years. My mother-in-law has a washing machine she bought used in 1979 and it is still working beautifully. Ive read the 14 pages of complaints on the Consumer Affairs website and agree with Diana in Kissimmee, Fl - I am sick to my stomach not only for Whirlpool not recalling the Cabrio, but for Lowes and Sears and any other supposedly family-friendly business for continuing to sell it! Someone please contact me if you know of a class action suit being filed.

After yet another frustrating round of laundry I have to write this. This has been the worst purchase (Cabrio 6800 Washer and Dryer) Ive ever made. Like other reviewers, I thought I was buying a high-end (high priced) product that has performed miserably from day one. Clothes do NOT come clean and for some reason, towels and dishcloths get ripped and shredded. All cycles (except sheets/towels) do not dispense enough water. Of course the one that does, results in the ripped and shredded problem. A little more than a year after purchase, we got an error code indicating the computer board was bad. Code would come up during initial cycle start and again at the start of the rinse cycle. Whirlpool basically said tough luck but shortly after, we started receiving offers in the mail to purchase an extended warranty for $175. Out of principle, I did not do this. Instead we discovered that we could push pause/start/pause/start multiple times and it would eventually keep going. We are still doing that on EVERY load of laundry (start and rinse cycles). I am not far from just biting the bullet and buying a new washer. It will not be a Whirlpool. One positive note is that the dryer has performed well, unlike some of the other reviewer experiences!

I purchased the Cabrio washer during the black Friday sale. The washer was a pretty slate gray. I loved the color and the fact it was a Whirlpool, which I thought meant quality. It was expensive but we were updating our appliances as our 10 year plus washer needed replacing. Big mistake. This washer is terrible. It keeps me stressed. There is not enough water to clean the clothes, my husbands white underwear is always dingy and dirty looking. The sheets are dirty and smells. I try putting bleach on whites before washing and the whites still come out with underarm stains. I tried all the recommendations to no avail. This machine is awful. This was a big financial mistake. As soon as I am able this machine is gone. Will go back to the agitator in the middle, and NOT a Whirlpool. I DO NOT recommend this machine unless you want something pretty because this is NOT a washing machine.

We purchased Whirlpool dishwasher Model #GU3200XTXB Nov. 2011. Two weeks later they replaced the soap/rinse aid dispenser because the rinse aid was running out the bottom of the dispenser. Feb. 2012 they replaced the handle which was loose. July 2012 the panel lights werent working and that was replaced. Feb. 2014 the soap dispenser door would not open, so the dispenser was replaced again. March 2014 the soap door would not open again so the computer board was replaced & the door did open. However, it stopped again 3 days later. April 2014 the dispenser and the board were both replaced. The rinse aid dispenser did not dispense leaving the inside with moisture on everything. So yesterday the dispenser was again replaced but now the rinse aid is running out the bottom of the dispenser. Thank goodness we purchased an extended warranty for $169 or we would have spent more than $1,000 on repairs!! The warranty company refuses to acknowledge that their lemon law should apply. There are 2 of us and we use it 2/3 times weekly.

Bought a built in oven August 30, 2018. Oven stopped heating two weeks before Thanksgiving. Repairman fixed it. It is not working again, two weeks later. Bought from Best Buy. They will not take it back. Whirlpool will not replace it. UGH!!! $ 1,600 down the drain. Will no one help?

Brand new dishwasher and first time I started it I noticed the timer showed the cycle taking over 3 hours. When done I opened the door and there was some water in the bottom and the door was very wet. Dishes had not been washed. A glass that had turned upright had no water in it. The soap pod was still intact. I started over again and the same thing happened - two more times. The silverware is not clean either. Its going back!!! Im sure there will be resistance but we will deal with it.

I bought a Whirlpool dishwasher from Lowes and it has never worked properly ever since. It has been a little over a year now and it will not drain, will not wash dishes, and it stinks so bad that you cant drink out of the glasses. Its a total piece of junk. I called the manager at Lowes and explained all the problems. He said that he would see what he could do. I left three phone numbers but he never even bothered to call back. I will never buy anything from Lowes again.

I recently purchased the Whirlpool Cabrio washer and it is the worst product ever!! It does not wash the clothes, it tangles it in knots and has ruined all of my clothes because it leaves holes in the clothing. I have had multiple service calls and all of the diagnostics check out. It is a horrible product that should be recalled and Whirlpool customer service does not stand by their product. Their supervisors and customer service is very rude and I will never purchase another Whirlpool product!!! I plan on posting my complaint everywhere possible.

Good News!! Finally a permanent fix & possible recall. My Whirlpool Gold bottom freezer was 18 months old and Out of Warranty. It leaked water on my floor like all the rest. I called and was told I had to pay the service charge. Speak with a SUPERVISOR!!! They sent a repairman who said a Kit had just come out to fix this. I had to defrost the unit for a day and he returned with the kit. Part number is W10309238. The repairman believes they will be doing a recall and fix these drains. Insist on speaking with a Supervisor!!! Get results, they will do it as it is a design flaw. The repair took about twenty minutes. Here in Ottawa, Ontario call Youngs Appliance for more info.

I purchased a Whirlpool refrigerator for my condo in February of 2012. During the past six months it started to freeze everything in the food compartment, and then during this past month the freezer started to slowly die. Ice cream became soup. After calling repair and examination it appears the fridge has basically died and it would have cost me over $500 to fix a $570 refrigerator. That type of lifespan is unacceptable. Before energy efficiency demands from the government, refrigerators lasted much longer. In the 50s, 60s, the refrigerator my parents owed lasted nearly 30 years. Am I expecting too much? Apparently so. I went out and purchased a Frigidaire this time. Hopefully, Ill get a few more years out of that one (Not happy).

I purchased a Whirlpool Water Heater BFG1J5040T3NOV from Lowe’s and have had numerous problems. The biggest issue is having to replace the thermocouple three times. It works fine for about a year then I need to replace it again. This is tiresome and wasteful and Whirlpool should be ashamed. As a company that once had a high reputation, this is sad. I would not recommend buying anything from them, especially their water heaters. After repairing this one, again, I will look elsewhere for the next one.

I went from an HE front loader to an HE top loader (Whirlpool Cabrio WTW7000DW0) due to the risk of mildew with the front loader. Im not the only one doing laundry and if someone else does it, it always seems that they shut the door when empty, contributing to moisture and mold that needed to be cleaned out of the gaskets. I am so unhappy with my top loader HE washer. When I stop the machine and look, I always see my laundry half covered with dingy water, sometimes part of it still dry at the top and it is disgusting. I frequently have to rewash loads due to detergent getting trapped in folds or pockets created that hold on to dirt and lint, even being careful with the detergent amount. I run the washer now every time with settings of deep water, extra rinse, heavy load and presoak with instructions, with settings taped to the top for others.At almost 1 1/2 hours each load, we just cant keep up. The laundry still forms pockets and sheets form a giant tent over the entire load that has to be unraveled at the end of the cycle and wound so tight it had no chance of rinsing. I had to get a repair person out because it got out of balance and he had a small hand-held computer to enter a code to rebalance it. When we discussed the issues I was having, he was ready for everything I was doing wrong. He told me I can not wash blankets or large items (I thought I was buying large capacity with such an enormous drum). He told me they have caught people adding water with a bucket during cycles and that the washer software can tell them if people are trying to work around the system which voids the warranty.Apparently, this is a common complaint he blames on the government wanting high efficiency so they make the numbers look good, sacrificing the ability of the washer to perform at what a consumer expects. I have never seen the water in my drum higher than a couple inches and the drum is HUGE, but never used to capacity. He told me his wife demanded they get a commercial washer because she was so angry about how poorly it cleaned. I feel so scammed and I wish I could have my old agitator back. $100 for the repair call, $150 for the code to be put in and Im on warning that they will see if I try to add water, run out of balance or dont comply with any reason they can void the warranty by just checking the data the washer is collecting on us.

Special features eg changing HE detergent conc. ratio for auto add feature in Load and Go is impossible to find, extra rinse doesnt work. No extra spin which would be useful for bulky loads. But preset cycles work fine and machine has very low vibration a big plus.

I do like washer to be efficient and quick at what they do.. I also like the way they are economical and use less water he energy economical it what I need.. I do like clean clothes. Right now I am using an ancient one and the sound drives me nuts..

In March 04 2014, I purchased a Whirlpool washing machine. After having had a Whirlpool for 17 years without any problems with it, I purchased another one. This last one is a piece of junk. I dont even want to talk about the noise, I think it is expiring or on its last leg. They should fire the engineers that invented this model and bring back the other engineers that invented the one I had for such a long time, they far surpassed these space scientists that they now have. On August 8, I called Whirlpool, they sent me someone from Dinos appliances. This man tells me that there is nothing wrong with this machine and that he re-calibrated it. Whatever that means, it is still not wringing the clothes properly. There are only 2 people in my household, so my loads are not very large. I even tried this Drain & Spin cycle after the wash was completed and the clothes still came out too wet. I also have a Whirlpool Dryer and I will not replace it with the same brand. I also will never buy a Whirlpool product again and will make sure that I will share my experience with everyone I know.

Water began accumulating on the floor, dripping out of the freezer 16 months from installation. Upon investigating I found the bottom of the freezer had a solid sheet of ice on it. Water was dripping out from the back of the freezer and collecting until it froze. I followed a YouTube video that explained the problem, the freezer drain clogs. The video continued with a how-to dismantle the freezer to defrost the drain and drain the water. Apparently the drain is too small and the fix is a new grommet which costs approximately $27.00. I followed the YouTube video and TEMPORARILY fixed the trouble myself. This is a Whirlpool defect, aka, poor design. What is Whirlpool offering to customers to permanently solve this problem at no cost?

I purchased a Whirlpool Cabrio washer and dryer from a local appliance center. Everything was working great. After some time, the washer began to have error codes. I would have to turn it off and restart using more detergent, more water and more electricity to attempt to get a load washed. I did purchase an extended warranty. I reported the issue to Whirlpool and I have had 7 home repair visits while still under Whirlpools warranty. The first time, the repair tech went under the washer and tightened a screw. REALLY! The next visit, the motherboard was changed and the issues kept coming back. Well, the Whirlpool warranty was now over so the extended warranty had to be picked up from the appliance center. Things got worse and had continued repair calls. After I had enough, I called Whirlpool and spoke to everyone under the sun. I tossed it outside and bought another brand washer. Several weeks went by and this washer still under the shed, Whirlpool contacted me and bought back my washer, GREAT.Now, here it starts all over again with the dryer, same issues with motherboard. Only this time, I am 1 month out of Whirlpool warranty and need $385 for a new motherboard plus cost to replace. I call Whirlpool again but only this time, they show no issues with this dryer and are not budging. I toss it out and again, purchase another brand dryer. I grew more angry by the day looking at this dryer sitting useless outside. I had it hauled off as trash. My question is how does a consumer protect themselves against these manufacturers? I do understand warranties but if it smells like a lemon, acts like a lemon, it must be a lemon!

Glad to know we are not alone in our disappointment with our Whirlpool French door refrigerator, but I am wondering what and when Whirlpool is going to do something about this. What a blow to their reputation. Goes to show things are not made as they used to be. We purchased our Whirlpool Gold French door (bottom freezer) in August of 2010. Here we are October 2012 and this is the third time it has stopped working. We have lost food, weekends waiting for repair people and cleaning up messes, and money. Same problem as others are reporting - the electronic board and controls. I just spent my Friday evening on the phone with Whirlpool, first explaining the problem to no result then waiting for a manager to call me back. Who (guess what?) never called. I finally called them and got the same script as the rest of you. It is outside the manufacturer warranty. Really, that is what you are giving me? Plus they will only look at it if we have a Whirlpool repair person come see it. When can they come? In 4 days! Ha, not likely. I am not giving this company another cent. We spent almost $2,000 on this fridge, all we are getting is 2, 3, 5 years? What a shame. We are fortunate enough to have had some space in our garage beer fridge for what I can save of the food. Our 7 years old, $300 Moffat fridge has been working like a charm. We will never again fall for the looks of a Whirlpool, let alone purchase another one of their appliances.

We bought a new side-by-side refrigerator (GSF26C5EXB00 26cf) with water and ice in the door. We have had to replace the built-in water filter every two months at $30+ per filter. This is unacceptable. We just want to know what to do to fix this problem. There is only one person who uses the ice maker, and no one uses the water in the door.

I purchased Whirlpool Washer WTW4815EW on December 29, 2015 for my tenants apartment and by October 7, 2016 it was not working. I called Whirlpool for service since the product is under warranty. The closest appointment was more than 2 weeks out. On the appointment date the technician called me and said he was on his way to my house which is more than 30 miles from my tenants apartment. The technician said he could not service the tenant area as that was a different group, so we rescheduled for a week later. A week later no one shows up, so I rescheduled yet again for November 3rd and drove myself to wait for the service person who was supposed to be there between 8 am to 12 PM. At 11:40 I saw there was a 10:36 am Whirlpool attempt to call me but no message was left. When I called back they told me the technician called in sick and they called at 7:30 (my iPhone indicated 10:36 am). Now they say someone will come on Saturday November 5th. It will be one month on November 8th with no working washer. While it is bad enough the washer stopped working in less than one year their service support is even worse than the product.

We purchase Whirlpool fridge less than a year ago. Its still under guaranteed. 2 months ago we notice the fridge part heating up and food was going off. I went back to the shop where we purchase the fridge. They said we had to contact Whirlpool direct so we did had to wait 3 weeks for someone to come and look at it. Fridge is not repairable. Fella who came out did not report back to Whirlpool. I was waiting and waiting to hear word. I rang to see what was the story on it and eventually they said O we will exchanged your fridge and we will ring you on delivery date. Now Im over 2 month waiting on a fridge. Whirlpool is a joke. The company should be put out of business for what they do to honest people buying their stuff, and people who are in the same boat as me should go to the high court and sue them for all the stress they put people through. Shame on you Whirlpool. Disgrace.

A factory authorized technician came out this morning and repaired the washing machine. The bolt had come off of the pulley, which then fell off and burned through the guard, and then burned into the insulating on the bottom. The technician said this happens frequently. All that needs to happen is to have a Loctite bolt holding the pulley rather than a plain bolt which comes loose with the vibration. All Whirlpool had to do was spend a couple cents more for the proper part which would avoid potential fire! I should not have needed to have had my home put at risk, needed this service call or pay all that extra money because of their poor workmanship and design failure. This should be a recall item, and all costs incurred by the consumer should be covered by Whirlpool.

10 years, no problems with our 25 cubic foot french door Whirlpool refrigerator. Ice maker is a solid performer, with nary an issue. Temperature controls work flawlessly. The black frame looks great in our kitchen with espresso color cabinets.

Just like hundreds (maybe thousands?) of others who have had the same part failure causing the refrigerator to leak, I had it and was told by my very honest, highly reputable repairman (not the one KA recommended!) that it was a DEFECT. I bought a French Door style #4609730. First, I complained on Twitter and the Social Media folks gave me the runaround. I kept it up and then, filed a complain with the Better Biz Bureau. They sent the complaint to Whirlpool, who owns KA. They gave me the runaround too - UNTIL I TOLD THEM HOW MY LOCAL TV NEWS station was interested in my story (true, I went to them too). CORPORATIONS SHOULD NOT GET AWAY WITH DIRTY BIZ TACTICS!

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

Originally installed early 2007, the very expensive unit went crazy after about 14 months, with random beeping noises, and non-response to keyboard entry. Sometimes unplugging the unit worked. When unplugging no longer worked, the unit was repaired by replacing the keyboard logic boards only to fail again the same way.about a year later. It appeared the heat or steam from the cooktop below the microwave was causing the failures, so we became careful to ensure the fan was on. Last week, after boiling some water, the unit failed again, with error code F2H2, the keyboard error. Didnt Whirlpool expect the microwave to survive heat or steam from the stove/cooktop below? Overall, the unit is great when it works. Unfortunately due to the large size of the 2 cu ft unit, only an identical unit will fit. Im skeptical of replacing my broken unit with another Whirlpool Velos unless this keyboard problem has been fixed in new units. Anybody know if Whirlpool has fixed this problem?

We bought the Gold Series Whirlpool fridge (Model WRF990SLAM00) in December 2013. A few months after its first repair, (dripping on the top left inside of the fridge), which happened within the first year and was covered by the manufacturer’s warranty, it started to make an incredibly loud whirring sound that kept us up at night. Our bedroom is upstairs and far away from our kitchen, and I had to sleep with earplugs to not hear the noise. We tested the noise on a decibel app and it came in between 66-70. A normal fridge noise level should be around 52 decibels. We had a repairman come out and he replaced a fan even though he told me it wasnt going to fix the problem. Wait, what? After he replaced the fan and the whir continued, we called Lowes extended warranty again, and they sent out a different company: 1-800-Appliance.The second guy replaced two kits and found some issue with the ice maker, which we were not even aware of, but the noise remained, and he then had the gall to say it was a normal noise. If it was normal, wouldnt it have been making that noise the first year we had it? We had 1-800-Appliance come out again and he determined he couldnt fix it, so Lowes sent another guy from the same company, and he replaced the same fan that the first guy replaced, which was clearly not the problem. Three perfectly good fans were wasted. BTW, the repairman who said the noise was normal told us that the fridge had a part that was made to be replaced after purchase because if Whirlpool had the part at the point of sale, the fridge would not meet the Energy Star standards. Hello, lawsuit! After three repairs for the same problem and five visits that did not fix the problem, we were told Lowes would issue us a return order in three days. Finally!Not so fast... one week later, no one called, so I called them and then Lowes denied having told us that! We gave them the name of the person who told us they would take the fridge back, but the woman on the other end said she had no record of that (how convenient) and, despite the California lemon law requiring only three attempts at a repair, they would require yet another attempt by one of their repairmen. She told me that if he determined the noise was abnormally loud and not repairable, then she could contact the manufacturer and go from there. So they sent a guy from the first company out and he wrote down that the fridge was not repairable and was very noisy. He said that should take the fridge back at that point.My husband called Lowes several days later after not being contacted by them and they told him that they need to send a different repairman out from 1-800-Appliance and that only 1-800-Appliance could determine if we could get a refund. If that was true, then why send the other company out? By the way, the second guy sent out by 1-800-Appliance wrote down that the noise was very loud and wasnt fixed by his repair. But the notes Lowes said they received from him didnt say that at all. They told me that he wrote that the noise level was normal. I am starting to think there is collusion between Lowes and 1-800-Appliance. Something very wrong here. So, six visits later and horrible customer service from both Lowes and 1-800-appliance, we are now being told that the repairs need to be 30 days apart from each other before they will issue a return.If the cause of the noise was never actually repaired, then why do we have to wait a month between repairs? We continue to jump through the hoops that Lowes keeps throwing our way, but it is now clear that they have no intention of taking the fridge back. The fridge is less than two years old, and we have the extended warranty. We couldnt take the noise any further because it felt like it was causing hearing loss and after several months of that horrible sound we were both on edge, so we bought an amazingly quiet fridge from Pacific Sales, and they assured us that they would not do to us what Lowes did. Pacific Sales pride themselves with having good customer service. Lowes seems to have taken delight in lying to us, selling us a lemon, and then not righting a wrong.We have moved the loud piece of ** into our garage, and if Lowes continues to change the rules of a return and act in collusion with 1-800-appliance, probably in hopes that we will simply throw in the towel, then at least we dont have to hear that horrible sound in the meantime. If they dont do the right thing and take back the fridge, then we will simply keep calling out a repairman to fix the problem. We have three more years of our warranty, and if Lowes doesnt do the right thing, we will make them pay for this one way or another. Viva la revolucion!!

I bought A Washer Whirlpool and right after 30 day of the purchase my washer went bad and I called the Whirlpool Services and they told that will take about 30 days to come out and take a look at it. Are you crazy!!!! Freaking garbage that is what is. Never would want to buy Whirlpool again specially with that type of customer services they have..

We bought the Whirlpool Gold series side-by-side about 2 years ago with an ice maker in the door and with this design, the ice bucket is on the inside of the door, which we thought was a very clever design, taking up less freezer space. Well, to remove the ice bucket, we had to use a blow dryer because even though you press the button which is supposed to disengage the bucket from the door, it has always been frozen onto the base.Then we started having issues of water leaking from the ice maker. It turns out, that the lever that controls the chute was broken. We called a certified Whirlpool technician to come out to fix the ice maker dispenser lever. Well as it turns out, it cannot be fixed. It is a sealed in the door unit and to fix it, we have to replace the door, a repair estimate for door and labor is approximately $800. That is absurd.I contacted Whirlpool and was told that my refrigerator is out of warranty and that there is not an option to repair the dispenser. There is nothing we can do. I said that according to the repairman, we are not the first to report this problem. When I contacted Whirlpool I was told there is no recall for this item. We purchased the Whirlpool based on the reputation that it has had in the past and the good product we have in a Maytag (which is associated with Whirlpool) dishwasher. Well, never again are we going to purchase a Whirlpool or any of its subsidiaries products. I have read so many unhappy customers here that I cannot believe that Whirlpool continues to make such inferior products or designs.

Purchased a house and old owners left an almost new one with house. Thing does not clean even minor soiled cloths. Plan on buying new machine directly and it will not be a GE or Whirlpool. I can see why they were willing to leave the new washer. I left a 15-year old Maytag at my old residence (wish I had it back).

Twelve years ago we bought an LPG Whirlpool range for our new home in Rio Rancho, NM. About 5 years ago, a tenant at our home reported a gas leak and the propane company determined that the Whirlpool range was at fault. The dealer in Albuquerque repaired the leak, by replacing all the valves at a cost of $470. A week ago, after a propane fill, once again, at least one valve was found to be leaking. Apparently, Whirlpool does not know how to make a valve that holds up over time. Over a 7 year period, I paid almost double the cost of the stove, only having to replace it at 12 years. These stoves are DANGEROUS! I will not purchase another Whirlpool product for the rest of my life.

I purchased a stainless steel side by side refrigerator and unbelievably the doorshelves came crashing down - they just cracked in the middle. How cheap can stuff be made, those fridges are not cheap. I thought Whirlpool was a good product - I guess not.

I purchase December 2019, I had my previous stove for 20 years and wanted a new fresh look. I purchased the stove during a Black Friday sale. Started having problems with the door not closing. Customer service hold time took days and hours of hold time. Took 3 weeks to repair. Now seeing and hearing sparking and its week before Thanksgiving NO STOVE AT ALL. DONT BUY!!!! What happens when warranty is over????

I purchased a Whirlpool gas stove model #WFG540H0AH from Sears in March 2103. Since that time, the oven has repeatedly broken. After two major repairs, the repair company said the fas venue (?) suspect board was defective and needed to be replaced by the manufacturer. After 3 weeks of back and forth calls with Whirlpool customer service, the only solution they provided was for me to purchase a new stove at a discount with no compensation for installation, the gas connection kit, or haul-away of the old appliance. The original stove cost me $1100 including the installation, haul-away and taxes. The replacement option would have cost me $800 and still did not included haul-away, the gas installation kit, or taxes. Hardly an affordable solution. Whirlpool at no time addressed that a part on the stove was deemed defective.

They are good washers but they are overpriced. They have way too many functions for doing laundry. I know everyone wants their washer to do it all but the machines just can’t. There is no washing machine in the world that can sense a stain and pinpoint it and remove it.

I purchased my Cabrio Whirlpool washer five years ago. In the past two months I have had three service calls for repairs. I had water leaking out from underneath the machine which was the result of a failed drum seal. Now I get a ul message (there was one blouse being washed on delicate) and the washer is making a terrible banging sound. I dont think it is spinning. I have not been happy with this washer. My previous washer was 30 years old.

My KitchenAid side by side refrigerator/freezer is a beautiful thing, shiny steel surface, gleaming white inside. However, its made poorly. The ice cube maker compartment broke and the replacement came without any installation instructions. It was hard to figure out and I broke it. Now, everything in the refrigerator is freezing and changing the temperature on the digital panel makes no difference. McKinneys appliance, where I bought it, no longer has a refrigeration technician and they referred me to Whirlpools 1-800 number where I supplied some information and sat in my chair on hold listening to music for a half hour before hanging up.The recording on the phone suggested their online chat where I was asked the same sorts of questions and was told I would get the answers I wanted by paying $5.00. I had no idea what I was getting into but I didnt pay, just terminated that inquiry. Feeling cheated by the company whose product I had mistakenly purchased. Im now running the risk of a technician visit, sometime between 8 am and 4 pm a couple of days from now. I have to be prepared to wait around all day for somebody to look at my refrigerator, charge me a lot of money and, from what Ive read online, potentially see the problem return in a very short space of time.

Water heater failed to maintain temperature. ** heads (more than 2) sent out by Whirlpool couldnt fix it! Calling the company was a waste of time! They run you in circles. Will never waste my money on a Whirlpool product again!!!! This was not my first problem with this company, but it is my last!

The main control panel on my Whirlpool Cabrio Washing Machine broke twice in the second year of ownership. I bought this in 2006. The part was replaced in March 2007 and then again in October 2007. Now, it is broken again and Whirlpool says too bad, they will not replace it again and will cost us $275 to fix it. People have posted about this problem all over the internet. How can they not help their customers and recall this washer part?

My fridge is over 10 years old and the compressor has not failed. I have replaced some of the bins that have cracked or been broken over the years. It is a side by side in black color and will probably replace it with another type but the same brand as long as it is economically feasible to do so.

Purchased a Whirlpool hot water tank from Lowes 5/12 and have had NOTHING but problems with it since day 2. The tank I replaced was around 20 years old, never a drip, never a problem, it just finally rusted through.. Well this piece of JUNK I had installed is just that JUNK.. I have been in contact with this company many times, they ALWAYS have a new story. I replaced my old thermal expansion tank 3 months after buying this JUNK because I was told it could be that. Well that didnt fix anything and cost me $60.00, then it was pressure relief valve, ok, another $20.00, nope not that. Well back on the phone and emailing this company, now they tell me I am not vented correctly, because with all the repairs being done on this tank, my Son noticed the top plastic pieces melting. Well back on the phone I go, and of course Whirlpool tells me, its me again.. Had piles going into my chimney replaced, no help, replaced thermal expansion tank again, no help, replaced pressure relief valve, no help. So sick of cleaning up water I want to throw up. Well I now know why they say, do not return to store where you purchased it, because it is bad business to have Lowes parking lot, looking like a Whirlpool graveyard for their product. .

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

There are plenty of reviews on this board already about how the so called AquaLift technology for oven cleaning is completely worthless so I wont repeat what they have already so eloquently described. AquaLift has managed to take us back in time to around 1947 or whenever it was before the old easy off oven cleaner was invented. I purchased the cleaning kit (affinity) as well but it doesnt do much of anything. The only people who might consider purchasing a stove with AquaLift are those who do no roasting or broiling of meat. The oven looks beautiful, so maybe it could be for those who enjoy a show kitchen and prefer takeout.

I purchased a Whirlpool refrigerator less than a year ago and both the door and icemaker have a problem in which PC Richards, the store I purchased it from, has had to service the refrigerator at least 3 times and have not resolved the problem. The door does not close properly and every time I use the icemaker, condensation builds up. Each time a tech person comes to my home, a different reason is given. I need this problem resolved. I dont need to monitor the refrigerator like a sick patient.

I bought a Cabrio top loader in 2007. Have now replaced a pump for the 2nd time. Replaced a circuit board once. Thank goodness the machine was purchased at a local appliance store who stand behind what they sell and are very prompt in their response time.

While the washer is great, the reliability of the dryer is lacking. The timer has broken 3 times on ours in 3 years. Each time the cost of the switch is $75.00. Too much plastic on the shaft. If the plastic was removed, and the shaft was metal, it would be a definite improvement.

Whirlpool gold series refrigerator - We obtained this appliance in 2013. The ice maker stopped making ice. Later on it began to make super loud popping noises. Stops cooling, doors are rusting, drawers are broken. We do not have extra money for costly repairs. The Whirlpool brand was worth $2500 and the letdown priceless. Do your homework before purchasing a Whirlpool!!

It took several delivery attempts to get a refrigerator without cosmetic flaw and it only lasted four years before Freon leak in evaporative system occurred. It would have cost more to repair than replace. Needless to say, I replaced it with another brand.

In less than 4 years my dryer had to be fixed twice as well as my washer. The dryer does its job. The washer is one of those HE washers that does not use much water. Clothes do not get clean without much water so I always need to set the washer on bulky to have water to cover the clothes. I wished I had kept my old washer. It worked a lot better.

Purchased a Whirlpool Cabrio 4 years ago. It worked fine until last October when I had to call a Repair Service as all the Digital Controls would not work. It was the Digital Board had to be replaced at a cost of $ 315.00. That was October 2016 and in October of this year 2017 it started doing the same thing again. I call the Repair Service and they told me not to waste any more money on this machine as it is a piece of junk. I guess he was right as when I read all the bad reviews it got today, I realize I will be better off to buy another machine. It will not be a Whirlpool product. I purchased a Sears Kenmore Washer & Dryer back in 1995 and the washer lasted 20 years and I still have the dryer. This is what you refer to as a good product.

Standard looking dishwasher. Quiet and efficient. Best value for the money. Highly recommend. Chose this brand over more expensive options and made a great decision!!! I dont have a single complaint.

Im glad to see that Im not the only one that is dissatisfied with Whirlpools products. Three weeks ago I found my basement to be flooded and you could tell that it was from the hot water heater that was installed in 2005. The plumber changed the release valve. I thought that was it. This past Wednesday I go down the basement and find another flood. The plumber said pilot was not lit. The explanation was wind could have come down the chimney and blew out the pilot. Pilot was relighted and within 12 hours there’s cold water again. I called the plumber again and said that the thermal coupling must have gone bad. I went to Lowe’s to get a replacement and found that Whirlpool is sending a free replacement but I would have to pay shipping. All well and good, but what do I do in the meantime for hot water? If Whirlpool made a mistake, why didnt they send the replacement parts to the businesses that sell their products? I guess that would be the simple solution; instead, they expect me to pay $30.00 for shipping and be without hot water. Well, let me tell you: Im tired of this hot water heater. Whirlpool can go out of business for all I care because they dont stand behind their products. Im going to buy myself a Rheem and Im sure Ill be a lot happier. Need a new hot water heater? Don’t get a Whirlpool!

Lasted a whole two years, no warranty from Whirlpool. No biggie until I read countless complaints that Whirlpool OTR microwaves dont last. When I was young we had a Whirlpool microwave oven that lasted 15 years. Apparently this one (made in China) is the direction Whirlpool has chosen to take, cheaper products for higher profits.

Whirlpool’s WFG505M0BS is a reliable gas range. It doesn’t have a lot of bells and whistles (no self-cleaning mode or convection oven), but it’s also not priced as such. If you’re looking for an appliance that’s sleek, smartly designed, and quick to heat up, it won’t disappoint.

Yes, Whirlpool makes Maytag, Im still paying for this junk. Too much to go into detail. I had to bypass the crummy fuse system in the Bravo dryer and hook up my own 15amp automotive fuse in the dryer to keep it working. This after two lame under-contract Maytag repairmen replaced the dreaded board, which did nothing. The washer goes cabunk, cabunk, cabunk throughout the house and shuts down with an unlevel code (no matter how level the load is) every time it does its load during the spin cycle. The dishwasher handle broke off and had to use a screwdriver to pry the handle latch open, until realized it doesnt even lock anyway and just pulled the door open. Now, the dishwasher has this noise problem which means they designed it to allow pieces of debris to escape past the trap like my other dishwasher had that was easy to remove and clean. Do not, I repeat, do not pay the $3,500+ I paid for this junk. Go buy a Kenmore thats 15 years old off of Craigslist! Youll be better off and it will last longer.

Whirlpool Cabrio Washer WTW7800XW is 13/14 months old (1 or 2 months out of standard warranty). We use it 3 to 4 times a week. The lid hinge developed a crack 2 or 3 months ago. Last week, it failed completely making the washer unusable. Investigations show that a new lid is around $250 plus tax and service call (approx. $500 complete). On contacting Customer Service, they continued to say monotonously out of warranty even though it is obvious to even a layman that this hinge/lid is not fit for the job and the manufacturing material has failed. They kept reeling off all sorts of protocols but would not send any of them as a copy. This is the worst service I have had from any company. The service is despicable and they should be ignored and banned from every consumer list. I appreciate that it is out of warranty, but the runaround I am getting seems to me that they expect their product to fail after the warranty expires and they are not surprised at all by catastrophic failures so soon.

Terrible wash machine. Some clothes come out having never even gotten wet. The spin cycle ties your clothes in knots so bad you have to machine dry them because the wrinkles are ridiculous. I’m all for saving water but if your clothes don’t get wet, how are they going to get clean? Also can’t do just a rinse and spin cycle. I would rate zero stars if I could. Don’t waste your money on this junk! Wish I could buy an old fashioned Maytag. Those washers were the best!

One year old Whirlpool gas oven/range w messed up control panel. Every brand new Whirlpool so far has broken or is messed up within first year of purchase. I am going to complain to BBB.

August 10 2014, I purchase a new Whirlpool HE. Monday cant wait for the delivery of my new washer! Im ready with my HE detergent & 2 loads of dirty laundry. Tuesday, I want my broken old Kenmore washer back! My kids clothes came out dingy. Did a second rinse & spin but didnt help. Second batch had to be rewashed. Some areas were not even wet. Had to pause it to add more water to & again to rinse it. Plus I had to mix my softener into a cup of water to add it on rinse because I forgot the rinse ball, unlike the old washer where I add into dispenser & forget about it. So unhappy & dissatisfied.

I purchased Whirlpool gas range with AquaLift Self Cleaning Tech exactly a year ago. DOES NOT WORK!!! The only Self that cleans will be you on your hands and knees. Still dont know what to use. Manual says do not use oven cleaner or abrasive or you void the warranty. Ok Whirlpool any suggestions? Soap and mild detergent not cutting it. You would think with all the customers complaining about this feature the bright engineers that designed this would come up with a solution.

I purchased a new Whirlpool range and had it fitted for propane. I used the stove daily and within two weeks, the temperature started fluctuated constantly. Several things I tried to cook ended up burned. I called Whirlpool to ask them for a possible solution. They wanted to send a repair person. I live on an island and knew it would take forever to get someone here. My appliance person said it could be only two things - the temperature probe or the computer board. I purchased both things and had them shipped to my address at my expense. It cost $257.00 to get the items. My appliance man on the island installed the two new items. I was hoping that would fix the problem. I am sad to say it did not! The oven still fluctuates wildly. I set the temp for 350 degrees and it shoots up to 450 degrees. I turn the temp down to 325 and it settles in at 350 for a period of time. Then, without any warning, it will shoot back up to 500 degrees. I have to open the door and let the temp back down to 350. This is how I have to bake and cook with this disaster. Wish I never purchased a Whirlpool appliance!

My Whirlpool washer Cabrio wtw5640xw0 is 2 years old. The computer board is shot, the FOES off balance. To repair would be 554.00 plus tax. I have to say this is the worst washer I have ever bought. My niece told me she just replaced hers that she got 2 years ago also. There should be a recall on this washer. Also I was told the washer and dryer should not share the same outlet.

Purchased a Cabrio Top Loading Washer and Dryer 3 years ago from Lowes and our clothes have NEVER even come close to coming clean without spending a ton on stain removing aids, which only work part time. So I approached the salesperson at Lowes and I was informed (after the fact) that the Cabrio top loaders had poor ratings due to the fact the basket only spun 30 times a minute whereas the front loaders spun 300 times a minute. So after 3 years Im forced to bite the bullet and purchase another washer. Ever since they purchased Maytag, their quality control has gone down the crapper. Now Im going back to the old reliable, the agitator washer. Newer is not better in this case.

We purchased a Whirlpool Duet front load washing machine Model #WFW9550WL in July 2009. In July 2016, the guide on the door hinge broke, making the machine unusable. When performing a national search for the part number (#8183202) to replace the broken hinge, I found that there were none available anywhere in the United States. When talking to Whirlpool, they indicated that during 2015, they only sold 142 of this part, and were currently looking for a new manufacturer for the part. They further indicated that the part would not be available until late September or early October of this year.

I loved the Whirlpool Refrigerator! Nice size and always worked well. Had to replace it after condenser quit working. This current fridge is unhandy in many ways. No light in the freezer and size is too small. Had to fit into existing space, but does not have as much storage space as the KitchenAid that fit in the same space.

After 1 1/2 years, My new Cabrio washer lid hinge started to come apart and wont latch, so machine wont run. After a day or so it completely popped up and out of align. The lid has PLASTIC hinge. This is obviously a problem. We have been in touch with Whirlpool, but they say they cant help?? This should be a recall. We have been waiting on back order for a replacement Lid at OUR OWN EXPENSE since Sept. 20, 2015. I want to get this fixed and use my Machine again. We are Senior Citizens and this machine is used 3-4 times a week. Not abused.

Bought this washer NEW 4 yrs ago. Now sounds like a freight train in the house when in use. Whirlpool customer service is absolutely USELESS!!! They do not stand behind their product and refuse to acknowledge what is a common issue. PISS POOR and will NOT give me a number to a higher up. Absolute disgrace!!!UPDATED ON 10/28/2015: This is an update to my previous review. 1st, I contacted Whirlpool who was absolutely NO help whatsoever and the person I spoke to refused to put me through to higher ups on the food chain. I was wrong in my previous review when I stated that we purchased the washer & dryer 4 yrs ago. It was purchased in January 2012. Started making noise in 2014 and has progressively turned into the sound of a freight train. I also failed to mention the stench that comes from this machine. It has also got to the point where it quits with 10 minutes to go in every wash. Whirlpool did send out a Whirlpool certified technician, which they paid for, who stated this has been a common issue with these and other models of Whirlpool Cabrio wash machines. Says in his 3 yrs with the company he has seen and diagnosed over 30 machines with basically the same issues (bearings are SHOT) and Whirlpool refuses to accept any responsibility for the defective design and that, in his opinion, they shouldve never been released. He gave me an estimate of $257.13 to repair. We decided to go ahead with the repair and technician came out only to tell me that there has been a re-work in the design of the replacement parts as Whirlpool realized they were faulty. So I now have to wait for the NEW designed replacement parts to come in as they are back ordered. WTF does that mean??? Shouldnt there be a RE-CALL and shouldnt they accept responsibility for this??? This has been, without a doubt, the most disappointment weve had with any purchase of a NEW appliance or, anything else for that matter, in our lives. After reading through some of these same complaints Im wondering if this machine is nothing, but a money pit and whats going to go wrong next. We also purchased the Cabrio dryer at the same time and have had no issues with it as of this time, but I assure you, I wait with baited breath. Their customer service department is piss poor AT BEST!! Please, stay away from ALL Whirlpool appliances in the future.

I bought a Whirlpool Duet Front Load Washer in 2008 and it began showing F71 and F70 error code in 2011. I paid approximately $1,000 for the machine. The washer wont finish the cycles and often wont start. When I press the power button, I hear the 3 beeps and after a while, shows the F71 error over and over. The information I gathered online indicates that many people have the same problem. The repair cost is at least $550 to replace the user interface circuit board and is no guarantee. This is ridiculous.How could GE sell consumers this kind of junk that fails to work only after 2 years. I had a top loader for 12 years with no problems, not a single repair call. My wife and I are extremely frustrated with piles of dirty clothes and no washer to clean them. I want GE to refund the cost of the washer on a 10-year prorated basis. This is only fair.

So after having the old white standby refrigerator and stove from the late 1970s, I figured it was time to upgrade. I have had theses appliance for TWO MONTHS! And they are starting to rust! I dont want to complain, I want a solution. Is there a law suit or advocacy to get our money back? I even bought the 5 year warranty, but found out that it is considered cosmetic!

Its a very well build dishwasher. Its quiet, really do a deep cleaning and make it easier to leave the kitchen clean after dinner with 2 kids its something that I need, Its not pricey either like other brands.

When I bought this stove, I already had a glass top (Sears) which was satisfactory but I changed to get a convection oven, never had a problem cleaning the glass top. To me, Whirlpool was, and I emphasize WAS, a reputable manufacturer and the stove offered everything I needed. Not so, the glass top is a nightmare to clean; no amount of elbow grease works. It is like cooking on a mirror. Talked to everyone I contacted but, it seems, I am the faulty element in this problem: I DONT KNOW HOW TO CLEAN!!! YOU NEED A FIRST OF SOMETHING FROM TIME TO TIME AND THIS WAS A FIRST FOR ME.They told me the only solution they could offer was to buy their own cleaner. Why do they need to market their own cleaner? I did not buy a museum piece that needed to be treated with special care, I bought a stove to cook on. I want as many people as possible to know about that uncleanable glass top. Every time I need to cook, I cringe at the amount of time and effort I will have to spend to get it clean. I am not a novice, I have been doing housework for the past 60 years. Beware, it is a most frustrating situation to having paid top dollars and to be stuck with a product that brings such frustrations. By the way, it was bought at The Brick in Canada. They were not helpful either.

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.