I have a front load washer by Whirlpool and a motor stopped working on the drain. When I called them, they told me it would be $200.00 for the part. I dont understand why they dont stand behind there product. What can be done to make these people fix there stuff? This is there product, if they cant do it right, then find a new job!

Owned it for approximately 15 years and has never had any problems with it all. I would highly recommend this product because it is affordable and easy to care for. It even comes with a filter for water. Great refrigerator.

We purchased a Whirlpool 5 top burner gas range in 2008. The oven stopped working. It would click 2-3 times, heat to 100 degrees then stop. Luckily, the range was still in the 1 year warranty. WP sent a tech out who eventually deemed it non-repairable. WP replaced the range. We were sent a letter offering an extended warranty plan May/June 2012. We took advantage considering our troubles with the first range. In October 2012, we noticed the oven started the same problem (2-3 clicks and would not ignite). In addition, the top burner clicks on its own to the point to having to unplug it. Since then, we have not plugged it back in for we feel it’s not safe! We have been working with WP Extended Service Plan (ESP). The obligor is the Federal Warranty Service Corp. for 2 months, ruining our Thanksgiving and now a few weeks till Christmas, our family is still without a range/oven. The ESP claims the damage is from chewed wiring from rodents. We live near fields that have just been cut; mice are coming into our home. However, when the tech came out, finally, he claims there are no chewed wires and the part he has to fix the oven is not worth putting in and will contact the ESP claims department to deem the range/oven non-repairable. This is the second range/oven - its doing the exact same problem as the first but ESP refuses to help us. The last supervisor would not do anything. We requested his ID# and he hung up on us. I contacted WP directly and waiting to if they can help.

I bought model N40S61-403 gas water heater. I had it installed, and then I came to find out that you cannot common vent with another power vented unit. I contacted Whirlpool 3 times, and got no help, other then it was hooked up wrong. The issue I have is that the water heater’s pilot light puffs out when the furnace kicks on. These 2 items are common vented, in the installation guide. It does not say anything about common venting until page 11, and even then, it is not in bold or highlighted letters. Now the unit’s pilot light is going out without the furnace kicking on. Once again, I got no satisfaction from Whirlpool, other than it was hooked up wrong. I realize that I am the one who is ultimately responsible. Hopefully, they put something on the box, or earlier in the guide to warn novices, such as myself. As for Whirlpool, that will be the last product of theirs that I put in my home, and as soon as possible, I will be removing 3 other appliances during a kitchen remodel, and will replace them with a different brand.

We purchased a new home 6 weeks ago that was furnished with new Whirlpool appliances. The stove worked great however the oven never worked at any time. The appliance sales person advised that we had to go through Whirlpool for repair on a brand new appliance. To date we have had to stay home 2 days and the range is still not working and third service call is now scheduled. A call to Whirlpool ended with them advising that we do not qualify for a replacement range, even though it never worked. We have been without an oven for 6 weeks now which is totally unacceptable. I would never buy another Whirlpool product or recommend them based on this current experience. We paid for a new product that never worked and they will not replace it. Hopefully they can repair it on the third visit. Unfortunately I have lost faith in this product and this company.

I purchased dishwasher model #GU2800XTVT0 in May of 2009. Today, it leaked water all over and damaged my floor. My husband pulled the dishwasher out of the cabinet and found that the motor had fallen off. It did not have a bracket to hold it in place and worked loose, which then disconnected a hose. I called the customer service but they wont do anything because it is beyond the 12 month warranty. It only lasted slightly more than two years. This is obviously a manufacturing defect and we were just unlucky enough that it failed after the warranty had expired. The most ironic thing is that my husband worked for Whirlpool for 20 years. There is no loyalty here.

Whirlpool Washer W10740628A - So disappointed! I have made adjustments for a year trying to get clean clothes from this machine. Compared to my previous machine which wore out, I now use more water because only deep water wash provides enough water; I always choose double rinse because if the machine does not clean, I do not trust it to rinse effectively either. I use more Tide than previously per wash; I use more Clorox than previously per wash. Everything from tea towels to heavily soiled jeans show stains and soils after washing. Instructions say not to spread the item in the washer but allow it to stack on itself, so twisted and tangled wet clothes are the result. I try to soak and scrub all visible dirt before I start the machine now; additionally, I use a mop or plunger or my hands to thoroughly immerse the clothes in the washer, somewhat like my mother did in 1950s. What on earth is this about and what is the buyer supposed to do???

I had an upscale Frigidaire suite of kitchen appliances and I loved them. A few years later I moved and needed a new set. I thought Whirlpool was about the same and I bought a Whirlpool set. The stove wont boil water or even fry an egg. It heats up and cuts off continuously. I called a service rep out and he called the engineer who told him it is designed like that and I need to use hot water on the stove to boil it. I was shocked at his ignorance and insulted by his stupidity. Ive been cooking for 60+ years and everyone who cooks knows you use cold water to boil water. But really, the stove does not cook anything. When frying eggs the burners cut off every few seconds to the point you cannot cook anything with it and the engineer said thats the way they designed it. DONT BUY WHIRLPOOL. THEY WONT EVEN BOIL WATER. HORRIBLE STOVE AND ONCE YOU HAVE IT YOU ARE STUCK WITH IT.

DONT BUY WHIRLPOOL! I bought a Whirlpool refrigerator 5 years ago. In June I had to have a new thermostat put in because the refrigerator would not stay cold. The food in the freezer would defrost and then freeze, defrost and then freeze. I had to throw all of the food out. Two weeks ago the refrigerator was making a groaning noise so I looked in the freezer and the temperature was up to 30 degrees. The ice cream was soft, the bread and buns that I had in the freezer were defrosting and small things like crab cakes had also started to defrost. Eventually the temperature went back down to zero.So I called out the repairman AGAIN! He told me this is normal that the freezer goes up to 30 degrees to defrost the freezer and the groaning noise I heard had to do with the Freon. It cannot be normal for food to freeze, defrost and freeze again. I called their customer service and their representative, Jasmine, basically told me all she could do for me was to schedule a service call. Really? I just had the repairman out the day before. I am concerned about food safety with a refrigerator that fails to keep food at the proper temperature.

This microwave had been the best I have used for several reasons. One is the modern design that goes with our kitchen. Two: it heats the food very quietly and produced an even temperature through out the food. Three; The inside of the microwave is easy to clean out.

I bought YMFE330W0AW0 Whirlpool on sale less than a year ago and I have been angry since almost the beginning. This is a cheaply made product which angers me because Whirlpool is supposed to be a quality product. The clock cannot be set because we have to press really hard and that part of the stove head is broken now. I knew this would happen after only a few weeks but was wishing it would not. There is a lot of heat that leaks out of the oven continuously when trying to bake something. The top is horrible. This stove top does not keep an equal heating element so if you put it on low, it actually turns off for a few minutes and becomes red again for a moment or so. It is impossible to cook anything evenly. I HATE and DETEST this stove. The worst product I have ever known. If it is on sale...BEWARE.

I can add my experience with the many others I have read about. My Whirlpool Cabrio washer top lid glass broke in the up right corner after only 2 months use. Like many other reports, this is not due to something falling onto the lid. It happens without warning and without operator interaction. This is a defective design!

I have had my Whirlpool refrigerator 14 years and have had service on it only 1 time, for the ice maker. I have had a fridge where the compressor went out twice. Dont remember the brand but do remember the experience.

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

Whirlpool has a terrible customer service! I have an almost new washer broken and I had it repaired. The company is having the same issues in another model and yet, they would not offer to even refund the repair.

Updated on 03/15/2020: We bought this eight years ago to replace a 20-year-old Maytag that had finally developed a rust-related leak after serving us faithfully and needing only one almost trivial repair ($10 DIY lid switch replacement) over that period. I have replaced the water pump, the gear case, rotating seal (3 times), the lid switch striker (3 times), and the replacement gear case is making noises indicating incipient bearing failure. In its finite wisdom, Whirlpool decided to make the failure-prone main bearing irreplaceable, which means you have to replace the entire gear case, at a best-case cost of $120 and a worst-case cost of $300, plus labor, unless you do the work yourself, as I do. The secondary issue is mold and a musty odor. The most effective way to eliminate this is to pull the drum (non-trivial, requires a car jack, a 2x4, and a special spanner/wrench) and swab down the inside of the tub with disinfectant. (Been there ... done that three times over 8 years.)Original Review: I am in the process of replacing the bottom seal on my 6-year-old Whirlpool Cabrio (WTW5500XW2) washer. This will be the fourth major repair I have done on it. Fortunately, I can do the work myself and know how to find the best price on parts, but it is still discouraging that a lightly-used washer would have so many problems in such as short time. (It replaced a 20-year-old Maytag that finally rusted out.) Repairs to date: 1) replaced drain pump motor; 2) replaced lid switch; 3) removed basket twice to clean outer tub, due to mold and odors; 4) replaced suspension rods due to excessive spin vibration; 5) out of commission awaiting a new bottom seal. Total cost of parts (labor was on me) is well over $100.

I have always loved the Whirlpool washer and dryer, namely because it is made in the USA, but the newer model Whirlpool is disappointing. The low water machines are not as effective as the older models. Even set on a 2 cycle rinse I get suds in the clothing. The spin cycle bunches up the clothing you can hardly shake them out before adding to the dryer.

We got a deal on our stove/dishwasher combination, establishing a payment plan upon purchase. And as a bonus, when you have a brand name appliance like Whirlpool, that made us more secure with the purchase.

We have had Whirlpool front loading washers for 15 years. The first had a bad bearing problem, that was eventually fixed, but still disappointing. The second doesnt is missing some features that the old one had. All and all I am happy with this washers and do not know of anything better, within my price range.

We purchased a mid-grade Whirlpool Gold Series dishwasher a little over 2 years ago. 14 months in, the motor failed, requiring a $295.00 repair/replacement. That was nine months ago, and now the motor has failed again. That is outrageous! No more expensive repairs on this piece of junk. Its going to the scrap heap. We just ordered a Frigidaire. While I have no experience with that brand, it cant possibly be as bad as Whirlpool.

I too expected a whole lot more for the price I paid for Whirlpool WTW5000DW1 HE washer top load. Fuzz, grass, pet hair and food remain after washing. Had a repairman out to look at it. There is nothing wrong with it. He says they do not use much water to save money. Well, if I a have to wash everything at least twice am I saving money? Think. Will look into an old fashioned washboard next time. Frankly I think it is a scam. The HE Tide is more concentrated and my clothes do not come clean! Tried to get my money back from the company that sold it to me and I was told only if I were to buy the $900 Speed Queen. Someone’s making a lot of money from consumers who need washing machines.

I had a Whirlpool Natural Gas Water Heater professionally installed on 2-27-2107. This unit came with a Honeywell controller and thermopile assembly. Today is 05-18-2019 and the unit is not inoperative. The pilot is lit but the burner wont light. Here are the issues that I have come across so far: When I go to the Whirlpool site there is no direct link to Whirlpool water heaters, just kitchen appliances and washer/dryers. When I click on parts and accessories link it gives links to washers, dryers or pedestals. Again... No information about water heaters. I scroll down to the bottom of this page and I see a link to All Replacement Parts When I click that it takes me to another site managed by RepairClinic. When I enter the model number for the water heater it says Not Found. I entered the part number for the thermopile on the tag on the orange wire #321165-002 and 100078039 and again it returns as Part Not Found.Its obvious that Whirlpool is putting little effort into supporting their water heaters or their customers. I called their support line and they were able to order the thermopile assembly for $55 plus $27.95 in shipping to get it here by Tuesday. Today is Saturday. So that means almost 4 days without hot water. And since this water heater was a warranty replacement for a previous one that went bad they will not cover the cost of replacement parts for the thermopile. Lesson learned: No more Whirlpool purchases for any of their appliances.

My washer is nearly 7 yrs. old. It has almost been a full-time spectator sport. Good thing its in the kitchen! Twists sheets so badly - on sheets setting - that it stops and I must undo the balloon its formed and rearrange the wet, heavy 2 sheets and 2 pillow cases. Now, it cant even finish the clean washer cycle without stopping. It seems it doesnt use enough water to do the job of washing items thoroughly. And it balks at heavy loads - which is what we bought this washer to do - blankets, rugs, quilts, etc. Two people, now only one, and two small dogs. I should have at least 10 years of service from that purchase. Repairman says $300+, and he sees it as a very common code. Build them to last or give up. Im disgusted with Whirlpool now.

After years, the gas hot water heater model fg1f5040t3nov went out. The plumber had me get a new part. 2-3 weeks ago, it went out again. I am trying another new igniter assembly. If it goes again, Im getting a new heater - not a Whirlpool! My plumber says he can get me a new one for a little more than I spent on the Whirlpool, and its much more dependable.

Bought this 18 cu ft refrigerator this year. Only 3 choices for temp. Everything freezes, milk has crystals, ice cream is soft. Buyers remorse! Old ref was a Whirlpool. Wished I would have given others a chance.

I purchase newly Whirlpool washing machine but it was not working from the first day of my purchase. So many service Engineer came but nobody can solve the problem, so I suggest to all please don’t buy washing machine from Whirlpool. I am very disappointed from this company.

A new washer, kept in pristine condition, indoors in an upstairs laundry room, used by 1 person for 4 years should NOT rust out. I took pictures and sent them to Julia ** a company representative after she offered me a discount on a new washer but would not send me an email with directions like it was some kind of secret until I insisted several times. The email simply had her phone number. I was to let her know the models I would be interested in and she would tell me if those were available for the discount. Then the company would charge me, deliver the new one and charge me to install and remove the old one. How is this for a great company. I sent her the models I might consider. No word back. Whirlpool, not looking like a stand-up company to be proud of. Shame on this company.I like the machine, but seeing it rust out before my very eyes has changed my mind. How will they address a 4 year old washer rusting from the inside out? How will they address a 1 year warranty? I found a copy of Whirlpool Washer Warranty that used to have up to five years for issues such as poor workmanship. It takes more than a year to find these things out. Dont make them if you cant guarantee that they will last. My last Maytag lasted 18 years and was still in good shape. I just wanted a model without the agitator in the middle and on that would conserve water. Should have kept the old one.

WRX735SDBM02 - I purchase this new WP refrigerator on 7/9/16 from Home Depot. It has been repaired twice already and now the front control panel is chipping and peeling away. Whirlpool says this is cosmetic. I maintain that quality construction and material do NOT simply disintegrate spontaneously. I want the control panel fixed under warranty for manufacturing defects. This NEW refrigerator cannot stay in my home looking like this, it is unacceptable to me. Their customer service refuses to do anything. This was somewhat hard to photograph due to the reflection issue.

I have to agree with a previous responder. I have a 6 yr. old Cabrio washer. Everything else works fine except the motor control board. Paid $72 for an estimate and they tell me $350 for parts & labor to fix it. $350 to fix a $439 (new at Lowes) washer? Do we now have disposable large appliances? You can do better Whirlpool. This has been a good washer. You shouldnt be pushing me to buy a new one so quickly.

Purchased a Whirlpool French Door Refrig. Model #WRF 954CIHZ200 in 11/21/2017 from Best Buy for $2300.00 on sale. Within the 1st year the Ice Maker broke & repairman said the ill design caused the wire to break. He had replaced numerous ones for the same reason. In the 2nd yr the freezer started frosting. Next thing the freezer quit. Next day refrig quit working. Called Whirlpool, said, So sorry. We will send you a $50.00 Visa gift card. That was to cover $200.00 of just bought groceries. Called repair guy & he diagnoses compressor was bad. (IN A LESS THAN 2 YR OLD REFRIG. THAT COST $2300.00????)Now, we are 28 day w/o refrig. Living with a Igloo cooler. Whirlpool says they have no stock left on compressors for our refrig. (probably because there are so many going bad in their refrigerators). They are trying to locate one somewhere in US so that takes 6 days then they have to ship to repair center then they have to schedule us for repair which will probably be another 7 days. Ghee, what a mess! Dont do it folks! Buy a LG or Samsung! If I had it to do again, thats what I would do! Whirlpool is Not what they use to be when I trusted them. Years ago. P.S. I bought microwave, stove, & dishwasher! They are all unsatisfactory! Never again!???

I purchased this washer (Whirlpool Cabrio HE) 2 years ago against the advise of many people including my husband due to the cost, $850 for what is now no more than a large paper weight! It had never really done a good job at cleaning our clothes. About 6 months ago, it started not spinning enough to remove all the water from the load. I thought, no big deal, I will just use the extra spin cycle. It became the normal thing - wash, spin, extra spin. Well, then it became wash, spin, extra spin, extra spin. I noticed 3 months ago that it was not even agitating. It fills up, sounds like it is agitating and then drains. There was no movement from inside at all. All along I am getting from my husband. told you not to buy it! I gave in and called the repairman - $185 for a console, $26 for a sensor and $55 for a couple of drum clips and then the $35/hour for the repairs. I would rather spend a couple hundred dollars and buy a washer with an agitator that really works. I would never recommend this washer to anyone!

Whirlpool Washing Machine WTW4800XQ4 - This is an expensive piece of garbage. My clothes come out with lint still on them. They do not smell clean and in fact, I wonder if they even are. My blankets come out heavy and soaking wet, so much so that I have to repeat a rinse and drain cycle before I can place into the dryer. The machine is always off balance and its so loud that my almost deaf grandmother who cant hear a thing wants to know what that noise is when shes halfway across the house each time Im doing laundry. Ive called Whirlpool and they have sent a tech out who insisted it was I who did not know how to load a washer and that was causing all of the problems. I found this interesting since I am 37 and never encountered difficulty with a washing machine before. Our visit concluded when he insisted it was user error and went on his way. The next day, the washer was not even cycling, and I phoned whirlpool back. This time, there was a computer problem and there was no arguing about it. The technician came back out reset the internal computer. The machine seemed to run more quietly for about a week, but went right back to its old loud self. The only improvement Ive noted since then is it does not move across the floor now while washing. I wish I never bought this thing and would certainly never recommend it.

This washer started out to be good. Its only 5 yrs old. We began to smell an odor. Went to Lowes, spoke with someone in appliance dept. Purchased something for washer. DID NOT WORK. We have tried bleach everything. Our clothes smell. I have skin rashes and I think it is related to mold and mildew. Called the service center. They said could be a sock stuck around the tub area. They need to recall this washer. We spent a lot of money and it has ruined everything. Cannot get the odor out. We cannot afford another one. There is black mold around the rubber lining when you open up the door.

Purchased a Whirlpool WTW7800XW a year and a half ago. The left top of the washers glass pops up, making it impossible to use the washer unless I weigh it down. Apparently a screw has popped out to hold the glass in place. Whirlpool used to make a decent product, but thought I should pay them $129 for their time, just to come out and then an additional part fee. How about the 30 minutes I spent on the phone with no satisfaction. My time is also valuable. I gave them the choice to come out and replace the screw (which shouldnt have fallen out in the first place) or lose a customer. Fortunately, I have a husband that can repair it, but I am extremely disappointed that Whirlpool is now making substandard products. We are a family of 3, so its not like Im doing laundry daily. Am I wrong to think I can get at least 3 years out of a product?

This morning another chunk of our Whirlpool Microwave handle fell off while I was cooking breakfast. I got on the internet after breakfast and typed in whirlpool microwaves to see if anyone else had experienced problems with their microwave handles and found this site. We purchased a Whirlpool Microwave oven from Lowes in 2011 (over the range model). About two weeks after it was installed, I noticed a crack in the handle. Then a few days after that, a small chunk of glass/plastic fell off of the handle when I shut the microwave door. Since that time, the door handle has been steadily disintegrating. Sometimes chunks of plastic fall off when one shuts the door, even if you are very gentle. Chunks of plastic fall off nearly every time I clean the microwave door, even if I dont touch the handle. Sometimes chunks fall off randomly when Im not even using the microwave. Pieces of plastic have fallen into my cooking pots a few times. Perhaps the steam from the cooking food loosens the cheap glue holding the handle on? What an inferior product! I am very dissatisfied with Whirlpool and will not recommend their products to anyone.

Having multiple apartments I have some experience with water heaters, with that being said, old school water heaters would last 30 years with basically no maintenance. Since those old, manual no BS flashing light codes were replaced with Whirlpool brand, I see constant problems. Honeywell valve/motherboards was the worst thing that could have been put on any equipment. More or less they all failed within few months past warranty expiration date. Replacement part is cost almost half of what brand new product costs. When called customer service, they are aware of said problem but will not help, or recall above product. There are plenty of videos and forums of people complaining about the same issue. Being poorly treated by customer service, I know that I will no longer be spending my money on whirlpool brand. 3 years off of the water heater is a joke.

We purchased our washing machine on October 12, 2011 from Lowes. Our washing machine broke on 04/19/12. We have been dealing with Whirlpool and Advanced since 04/23/12, trying to have our machine repaired. Whirlpool sent A&E out on 05/09/12. A repair person from Advanced has been to our home 3 times, and A&E has been to our home twice already. Advanced came to our house on 04/23/12, 05/07/12 and 05/09/12. A&E came to our house on 05/09/12, and again today, 05/11/12.Finally the repair person from A&E said he needed to order parts which are supposed to be shipped to our house. At this point in time we have very little faith that Whirlpool or A&E will do the right thing and repair our machine. We do not understand how a company like Whirlpool keeps getting away with horrible customer service. Whirlpool is the only company we have found where you cannot get in touch with someone who can resolve your problem. Whirlpool told me today that since a repair person is already trying to resolve our problem, we have no choice but to wait until they repair it.

Its a piece of junk. The only time it will finish a wash and spin dry is when it is empty. Otherwise, it stops and lists an unbalanced error code. I opened up the service panels and found no broken hangers or clothes. There’s no way to bypass the system. I have read of similar issues and of course, its just out of warranty. I assumed the warranty was like other brands but it’s much shorter. What to do? Purchase a washer with dials and not a brain; it will last years. Note that the models without a brain cost far less.

My elderly mother purchased a Whirlpool Cabrio washing machine in 2013 (Model Number WTW8600YW1). It never filled properly with water. It evolved to a sensor and circuit board issue that Whirlpool never totally remedied. Hence, the machine never worked properly. This 800 dollar purchase on an elderly persons limited budget had to be utilized minimally. Now fast forward in 2015, even with minimal usage and white glove handling, the machine is displaying an F51 error. You guessed it, Whirlpool will not remedy the issue, although it is well-documented to be a widespread complaint hence clearly a product defect. Shame on Whirlpool, their business practices, and what amounts to theft of an elderly womans finite income. I have advised my mother to trash the useless Whirlpool appliance and purchase a Kenmore washing machine, of which I have been the proud owner for 10 years, doing laundry for a family of 5.

My Gold Series Whirlpool Electric Range is 3 years old. The main board for driving the burners, oven, etc burned up which caused my oven to go from the 200 degree setting to 450 in about 3 minutes burning everything that was in the oven. They want $400.00 + installation to replace it and that is if one can be found to actually install. The stove was purchased for $850.00 because of the Brand and now they want half that value to replace a board that will likely fry again in a year or two. I find there is no value for money and will not ever buy a Whirlpool brand again.

Add us to the list of those whose Whirlpool Cabrio washer has failed. First, it was the infamous circuit board at a cost of $475 installed. Now, the tub bearing is apparently beginning to fail given the machines new propensity to roar like a freight train during the spin cycle. A letter to Whirlpool resulted the too bad ** letter that everyone else has gotten. This really should be a class action suit money-maker for some attorney. So now the question: Throw good money after bad hoping to get an additional couple of years out of it or bite the bullet and buy some reliable brand?Never again a Whirlpool, thats for sure. I pointed out to them that in the age of the internet, they wont go unpunished for this but theyre nothing if not shortsighted. An $800 machine requiring $475 worth of repairs and apparently soon to need another $500 worth of repairs. Whats wrong with this picture?

Whirlpool Cabrio - This expensive machine should be called the Presidential. First it spins, spins, spins. It sprays tiny amounts of water, so little, that there is 2 inches or less. There isnt enough water to cover the clothes so no agitator to stir and mix them. There are ridges on the bottom of the tub called aggrivators to twist everything into pretzels. This twisting spreads the dirt around, but does NOT remove it, the utter lack of water giving it no where to go. I use a hose to add extra water, and I hand soap dirty spots. I stop the washer frequently to hand rub and slop the clothes around and un-twist them. Explain to me how running this machine 3 times plus adding water saves water and energy. I cant, in good conscience, sell this POS to someone else, and I cant afford something else. I sure miss my simple reliable old Maytag. I could say even more about this atrocity, but not now. I HATE THIS POS!

Whirlpool Cabrio - This washer and dryer have been garbage since the beginning. It does not clean soiled clothes and the dryer (gas) has always taken forever to dry a load. I have always had GE prior to this. I will never purchase another Whirlpool product again. We even purchased the extended warranty and the repair guy was out yet again and said it is not repairable. Now we are without a washer for 5+ days and its going to be reviewed. Review? I want my money back. Theres a lemon law for cars, there should be one for these machines.

I like the looks with brushed stainless steel and black. The most difficulty was getting someone to help get it and load it. But other than that, Ive had no problems with the dishwasher.

We bought a Whirlpool oven in Costa Rica. Wanted a good oven from a reputable manufacturer. Oven has had numerous problems over the past 2 months. Local vendor is worthless and trying to run out guarantee time. Whirlpool U.S.A. says it will not help with problems for products sold outside US or Canada. Fair enough. THEN DO NOT SELL THE WHIRLPOOL BRAND WHERE YOU DO NOT SUPPORT YOUR PRODUCT.

Our Whirlpool Duet Washer pair is 2.5 yrs old. The washer didnt work at first, but a repairman found the problem and fixed it right up. They have not broken. The dryer has been fine and we have had them stacked for most of the time without any issues. My problem sounds minor compared to those others listed here, but this thing is ruining all our white or light colored clothes. They go in white, and come out covered with splotchy, dirty looking spots literally all over them! They werent that kind of dirty when they went in. It’s the oddest thing, like it makes dirt. Reading some of these concerns makes me wonder if it has a mold problem inside somewhere, and that is what is ruining our clothes. Tax return is coming and it is going. End of story.

(Model WTW5640XW3) Whirlpool Cabrio worked Good for 11 months (just after warranty Expired). Replaced capacitor would not spin, hums loudly and smells like burning Plastic. Then about 2 months after that Lid locked, failed, replaced. 7 months then Actuator failed and now looks like the Main board give up. I dont know where The original parts are made but they are Cheap junk. New technology is crap for Washing machines, gears transmission and Solenoids last a lot longer plus they clean your clothes. And belts and solenoids.

Tried for several days to schedule service call for my leaking whirlpool ref/freezer. Waiting on hold to speak to a rep... transferred to another dept. - on hold again listening to a recording advising me of the unusual high volume of calls to call back at a later time (should have been my clue of all the problems with their product). I had three different Whirlpool phone numbers given to me from the reps I spoke with. I would like a refund for my extended warranty. I have called an independent service company and will pay for the repair. I will not buy or recommend Whirlpool or their products.

I have had my Kitchenaid dishwasher since April 2010. I have the receipt as proof. I have recently had a professional out to replace a seal in the door, the gasket on the vent and the unit still leaks. The only places left are the metal body and door. I called to say I wanted the warranty honored. I was told one of their servicers had to verify. I agreed. Their servicer came out at the agreed time. He did not bother to protect my hardwood floors from his muddy shoes. He also absolutely wreaked of cigarette smoke. He proceeded to try and push me into paying for the same repairs I had done last week because he would not warranty the parts under warranty unless I paid him to replace parts a week old. I told him he was here to verify the leak not push me into more repair costs. At this point, he began slamming his tool box together and exclaimed Thanks for wasting my time. I called the Kitchenaid warranty number in my pamphlet to see about the warranty. They refused without making me pay for their esteemed professional to do the same work, a real professional already did. The best I was given was 30% off a new appliance. When they wont honor their 20 yr warranty on the one I have, telling me their unprofessional is so much better than the one I used who did protect my floors and treated me with respect, I have no faith left in this company or its servicers. I will be filing a complaint with the BBB. I plan to be very vocal with this companys refusal to stand behind their products and explicit support of disrespectful servicemen.

Avoid Whirlpool refrigerators and dishwashers. Fridge sounds like someone’s trying to get out. Repair person said it’s icemaker and typical. Dishwasher has little friction gaskets that keeps the door from falling open. They’ve been replaced twice and found one on floor today. Plastic end of slider for upper shelf keeps falling off repairman replaced it showed me how to put it back on. This falls off regularly. Range has coils underliner of oven. Takes forever to preheat and self cleaner cycle is a joke. Million dollar condo with upgraded crap appliances.

You cannot control anything on this machine. You cannot pre-fill to dilute detergent- you cannot choose temp because what you choose is changed by the machine (manual). You cannot choose your own combinations of temp, water volume, and timing. Once the ** thing starts you cant change anything, like the setting you wish to use. Do NOT BELIEVE THIS IS ENERGY EFFICIENT. There is a REASON that this machine has a 2nd rinse. It is because so little water is used that it does not allow soap, lint or dirt to have anywhere to go but back into your clothes. YOU have to trick it out to get enough water to actually get some loads truly wet. EVER! You stand there like an idiot opening and closing the lid just to get enough water to dilute the detergent. You cant pre fill and then add your detergent because, it needs to sense your clothes load. Wont fill with the lid open. You cant rinse the detergent cup out. You only get to do what Whirlpool already knows about your needs. Oh & lets not forget the spin cycle. When you open the lid, large items like sheets will look like a pancake made from one of the sheets. However underneath will be a tangle of the rest of your wash worthy of a Gordian knot. You can yank your shoulders out trying to dislodge the clothes. Spin yes, I guess it did, I just didnt need permanent press wrinkles. And thats if you CAN actually open the lid. For some idiopathic reason the lid may be on lock. Good luck with that. Most often, youll find no reason that you can discern like an unbalanced load or as the booklet suggests, you havent figured out how to load a machine. I hate the design of this so much that I called the company and they said that they would send a repair man out to see if its working. Whats he going to do? Run a couple of washes and say hey thats how they design these things? They will not replace it. They do not stand behind their products. You are stuck with bad design period.Describe Yourself: Frequent User. Service/Delivery: It came with a big dent in the dryer we bought with it. Installer dudes crossed the hot with the cold. Whirlpool will not stand behind the products they make & they make lots of the brand names. So they figure they can just do exactly what they want and youre screwed because even under warranty, theyll only fix the mess of engineering they designed in the first place. Bottom Line: No, I would not recommend this to a friend.

We have an 8-year-old built-in Whirlpool Estate. It is probably as basic a model as you can get. It has been 100% reliable, and cleans the dishes well, even without rinsing. We do not buy expensive premium dishwasher detergents, either. So far, we have required no repairs. Basic features--heavy wash, normal wash, pots and pans. This dishwasher is standard (not extra large.) This is not a fancy dishwasher--just white. It is what matches the rest of the appliances. We have been lucky regarding the performance of such an inexpensive dishwasher. We paid about $250 for it.

My Whirlpool refrigerator, a side by side refrigerator, doesnt stay cold. Now it is 60 inside and my ice is melting but temp says it is 40 in freezer. It is only little over a year old and warranty is no longer good. Hard to believe it didnt last any longer. I paid an expensive price for it. Now I have to have a repair man come and fix it.

We bought a Cabrio washer & dryer September 2010 for a room addition that wasnt completed yet. We didnt get moved in until the first of November. So the washer wasnt used until then. In January 2011 (15 months later) it stopped spinning so clothes were dripping wet. We called Whirlpool and were told that they would be happy to set us up for a service agreement for $322 for one year. We declined since we bought the washer for a little over $500. When we had a local Whirlpool service man come out and he determined that it was the control board which would cost $265 (Whirlpool only warrants parts 90 days). I sent an email to Whirlpool and was told too bad, so sad. We called their customer care line (that is really not the term for that phone center) and asked to talk to a supervisor, who essentially told me the same thing. Whirlpool is making equipment that is extremely poor quality. There is no incentive for them to produce a better quality product as they make money on the extended warranties that are necessary, or if you dont buy an extended warranty they charge an extraordinary huge price for their parts, which they dont warranty. We will never purchase anything made by Whirlpool. I am not sure where this useless piece of junk that I have will end up but I intend to let everyone I know what a terrible company Whirlpool is to deal with.

We have had this dishwasher since 1983 and we still run it on an average of 6 days a week. Features are the fact that it has given all of our dishes, our silverware, our pots and pans sparkling clean looks for all those years. It fits nicely into the kitchen space which was designed for a dishwasher. It never needed a repair. After all those years, this machine still looks fine. After all those years I really doubt if it still has a warranty and it never needed service.

Bought dishwasher and a gas range about a year ago. Had to call the repairman twice on our dishwasher and three times on our gas range. Now it is little over a year and I am out of warranty. I paid extra and thought I was buying products of a good brand. I should have bought products from one of the cheaper brands along with the extended warranty.

Bought a Whirlpool Refrigerator Gold Series on 11/04/2014. It stop working on 6/25/2014 when I called customer service to report the problem. Received the visit of 2 serviceman on 3 different occasions and still dont know when the refrigerator will be fixed. What should I do?

Such an expensive refrigerator but poor quality. Bought at Home Depot back in November of 2019. The bottom Freezer freezes up messing up everything only three months after purchase. I wouldn’t recommend it at all to anyone.

We purchased our refrigerator new in 2014. After only 4 years and taking meticulous care of our Whirlpool Top Mount Refrigerator, the temperature regulator stopped working - and the condenser fan rang constantly. The refrigerator couldnt get below 50, and the freezer vacillated between 17 and 30 degrees. We live in a somewhat remote area and could not find an appliance repair person to look at it. So we had to purchase a new appliance. Needless to say we did not choose Whirlpool!

Whirlpool Electric Convection Range - We purchased a Whirlpool fridge, range and microwave, I am finally sending my review after another of many frustrations with the AquaLift self cleaning oven. NEVER, NEVER buy one unless you love cleaning your oven. The temperature goes to 160 for 40 minutes, it does nothing to clean your oven. I called the co. we bought it from. The fellow said, Oh you should clean your oven weekly, really there are 2 of us and I use the oven maybe 2-3 times a week without spillovers. When I do have spillovers I use the AquaLift waste of time, then have to spray it down with Affresh Spray the co. I bought the range from recommended, still have to scrub hard to remove built on spills. Save yourself the money and frustration. Buy anything but a range with AquaLift self cleaning.

All I ever wanted was a nice refrigerator with the ability to get crushed ice from the door. We bought our refrigerator from Lowes several years ago and have had problems with the ice dispenser ever since. Lowes sent repairmen many times and even replaced the one we purchased with a newer model. Whirlpool refused to replace. The problem persisted and we had to continue calling repairmen. The last straw was when the repairman asked to borrow my hair dryer to help him melt the ice that continuously builds up in the door chute. I stopped going through Lowes and went directly to whirlpool for repairs. Since then I have been told that I should remove the ice box and clean out weekly, be nicer in order to get better help and that my husband should do the talking so that Whirlpool will be more helpful. I am so disappointed. Its been a couple of years since I last called for repairs even though we had the extended warranty. I have to clean the chute daily in order to get crushed ice from the door. Whirlpool knows that their engineers developed an ice dispenser with problems but will not admit it. Their customer service is the worst ever. I will never buy a whirlpool refrigerator again.

This diswasher is streamlined and elegantly desiged for any kitchen. It stays externally clean with easy to wipe surfaces. Easy to use controls on the top of the door that cannot be accidentally hit when walking by the item. Plenty of internal space for lots of dishes. Internal silverware rack is easily removalble and not in the way of dishes. It is extremely quiet when running, like a soft hum in the air. A real "bang for your buck".

I called to find out if they could assist me with my dishwasher. It is 1 year and 3 weeks old. The start button will not switch on the machine. The only way they would assist me is if I would pay the full cost of repair because it is 3 weeks out of warranty! There are no other suggestions. I would have met them half way with paying half the bill but I got nothing but Im sorry and we cant help. They dont stand behind their product.

We bought this Gold series refrigerator in 2013.. Less than a year we started having problems with rust on doors. It was so embarrassing people could see this. After that it was like one part after another, the motherboard, the ice on fridge, the ice maker. They changed the same part several times. Now April 2015 they say vapor cooling is not good and they have to put coolant and replace another kit.. Now we have to wait 1 week for that part. Meanwhile our food is going to go bad. Ive been calling for years about this lemon of a fridge. And the last time I spoke to somebody they say buy another fridge while youre waiting on the part to come out. Wow. This is literally driving my family insane.. I cant believe they just expect us to let this happen.. We paid about 2,500 for this lemon of a fridge.. I see so many complaints and youre telling me Whirlpool can get away with this.

I have a whirlpool water heater. This is the third or 4th time that the upper sensor failure code has come on. Our water heater turns off all the time and we have to fire it back up. In the past few months, it has started pouring water out from the long tube on the side of it anytime we turn it on for more then 10 minutes. The last time we called a plumber, I was trying to get a quote on a tankless water heater. Ive been so fed up with ours and I thought that would be a better route to go. The plumber explained the negative sides to a tankless water heater and explained that our water heater was a really nice, really expensive and fairly newer model. I told him that I had just gotten it about four years ago. He said he could just fix that one. So after looking at it, he acted as if he didnt know what an upper sensor was and told me it was under warranty and that I should call for the parts. Every time we have called for the parts, they send the same box thing on the front of the heater and every time, it doesnt fix it for long before it says the same thing. And now, like I said, the water heater has now added the problem of pouring water out of it. I need help. I dont know what to do. Im tired of not knowing if Ill have hot water or if the water heater is going to pour out water. Im pregnant and worried that if we cant get this fixed Ill continue to have this problem along with having a baby to take care of. Please help.

Whirlpool Dryer Model WED4815EWO and Whirlpool Washer W10682799 - I have always had great results with Whirlpool products. Both are energy efficient and save on operating costs. I purchased them three (3) months ago. The washer locks during the wash cycle. That took a little getting used to. I have always been able to rely on Whirlpool products. The top loading washer (W10682799) is energy efficient and high capacity. It regulates the water level so you dont have to worry about wasting water. The matching Dryer (WED4815EWO) has a sensor to regulate your drying time or it can be manually set. I appreciate the worry free, self-regulating functions on both the washer and the dryer.

Bought top of the line KitchenAid refrigerator $4500... Completely stopped working in 3 months. Cannot get ahold of anyone at Whirlpool & their phone system is ineffective. Appliance technician came out, cannot get the parts he needs from Whirlpool!?! He said that if he cant get parts in 21 business days then Whirlpool may consider replacing the fridge. Is this a joke?!!! I have a 1970s Frigidaire still working!

We purchased our brand new home ten years ago and we were thrilled it had a double wall oven unit that I had always dreamed of owning. Well, the first time I used the self-cleaning mode that dream became a nightmare! The oven was in cleaning mode and I was so happy as I had never had a self-cleaner before! When the cleaning was done, the door remained locked and the control panel was not working. After making sure it was cooled the next day, I called for warranty repair. They came out and fixed it and apologized for the inconvenience. I was thinking it was just a glitch and went on with life. Due to my husband’s business, we only live in the house part time as we do extensive traveling. My children are grown, so my cooking is mainly holidays and birthdays when we all get together. Since it is used so seldom, the need to clean is not as often as others might be. The next two times I cleaned it the same thing happened. The third time they came out they informed me that it was getting too hot in the cleaning mode and the steam was going into the computer panel and melting the electrical wire. They also said I would no longer be under warranty and from now on it would be my issue. The next two times I cleaned the oven, I did so the old fashioned way and skipped the self-cleaning. This week my oven started beeping and giving me a code and will not work. I called my trusted repair man and this is what I learned. The computer board is probably toasted. They no longer make the board, so he will have to send it out to be rebuilt. This will take 10 to 14 days and the cost will be somewhere in the neighborhood of $650.00! Are you kidding me?! How is this my issue? I have checked faithfully every few months, assuming that others are having the same issues, and that Whirlpool would be doing the right thing and recalling these ovens. Stupid me! This last time I had not even used the oven in three days and it still went out? I am old enough to remember when the first place you went to look for appliances was Whirlpool because they were good, they lasted and the company stood behind them. Oh, how the mighty have fallen. From now on they will be the last place I look! I’m not sure what is going to happen, but I can assure you I am not spending $650 to repair this piece of crap!

We bought the Whirlpool Duet set for $1,000 18 months ago. About four months ago, it started shredding our clothes. I would get them out with holes in them, but there was nothing sharp in the washer. Then the grey outside seal started deteriorating and getting tiny balls of rubber all over my clothes, ruining several white shirts. It always smells like mold. I just went to get my clothes out of it to find out it leaked water all over with that disintegrated rubber from the seal. The seal had completely ripped from the top to the bottom drain for no apparent reason. Now we are replacing the below. We JUST paid it off this month. It is crazy, it is already breaking!

We bought this double oven range and then find that two element cooktop sometime work and sometime do not even the indicator light is on. Please tell me how to fix it. It cause me headache.

After 7 attempts to fix my 6-year-old Whirlpool Front Load Washer (original price $991.00) I had to trash it. Then I stupidly bought another Whirlpool Front Loader (WFW75HEFW) Feb 2017. It has not worked properly since day 1. The clothes come out dripping wet. At first I thought I was doing something wrong. I tried every cycle, limited amount of clothing and ran additional spin cycles to no avail. Finally I gave up and called for service.Whirlpool is very much aware that a number of their machines came off the line with defective spin bearings but they wont admit to it. Instead I am expected to have it repaired! It involves the entire inside of the machine being rebuilt. Its a 2 man job that will take 3-4 hours.This is totally unacceptable and it is obvious Whirlpool does not make a quality product nor do they value customer satisfaction. DO NOT UNDER ANY CIRCUMSTANCES PURCHASE A WHIRLPOOL WASHER. They are difficult to work with and I for one will never purchase or recommend any of their products. I purchased this washer from Home Depot and now my only hope is that they will honor my intention of purchasing a non-defective product. If not, I guess Im in for another miserable experience with a Whirlpool product.

Had one double wall oven lasted 15 years with just about no problems until the control panel broke and could not be fixed. Bought another just like it and it is having problems after 6 months. Light wont work. Turn on from the control panel and the time does not work.

I purchased a Whirlpool Water Heater BFG1J5040T3NOV from Lowe’s and have had numerous problems. The biggest issue is having to replace the thermocouple three times. It works fine for about a year then I need to replace it again. This is tiresome and wasteful and Whirlpool should be ashamed. As a company that once had a high reputation, this is sad. I would not recommend buying anything from them, especially their water heaters. After repairing this one, again, I will look elsewhere for the next one.

My oven is less than 2 years old. The blue enamel has had cracks for over a year & was told its cosmetic & theres nothing that they can do about that. Now its starting to pop off. I found a few slivers in a vegetable dish! Now I cant even use the top oven because of this! It seems to only affect the bottom of the top oven. I feel that the temp may be getting too hot for the blue enamel which is another safety concern. I have contacted Whirlpool/KitchenAid to be told that if they send out a repair person he would just use a marker on chips. I was told they would give me an employee discount from $3000 to $1800 to replace but I would have to act right away for that price! Really? My oven is only 1 & a half old.When I started researching this problem I am having I found many complaints of people having the same problem! As a consumer I feel so mad & frustrated that they are not doing anything about this since its an ongoing complaint from so many dissatisfied consumers. I do believe it is a safety & health risk now that its showing up in the food that has been cooked in that oven. I would urge anyone thinking of buying a Whirlpool/KitchenAid cobalt blue enamel oven not to! They will not stand behind their product & you will have to replace at your own expense. Shame on you Whirlpool!

We purchased a side by side Whirlpool refrigerator/freezer in June 2011 and have had nothing but problems with this piece of crap appliance. Ice maker has been repaired 3 times, water line clogged twice because of freezing and thawing. Now the machine only cools both sides to 45 degrees F. I am having a repair person come out on Monday to tell me what is wrong but I am so upset with the poor workmanship of this product I dont want to put another dime into the repair. We paid $1100 on this and have paid at least $600 in repairs over the past 4 years!! I agree with all of the other comments on the poor manufacturing choices. We had a GE prior to this and it lasted 10 years but we had the same issues. Repairing it every few years. I am not sure what brand to purchase next. If anyone has a suggestion I would be open to it.

The exterior look of the refrigerator (WRX735SDBM00) is impressive and the stainless steel does not show finger prints easily. It has two french doors on top, a middle drawer, and the freezer drawer on the bottom. The interior is 25 cf, but there isnt much space, even with reconfiguring the shelves, and the crisper/meat drawers are so small, that a large bell pepper wont fit. When one French door is closed it pops open the other door, which then does not close back tightly. Although there is an alarm system to warn a door is open, it only works if the doors are open and not just cracked. We have to constantly push on both doors to be sure they are closed tightly, even after washing down the gasket to get a better seal.

We had Lowes install a Whirlpool model Nu40T121-403 natural gas water heater early October 2012. The temp controller went out in October of 2014. I replaced the controller myself at a cost of $30 for overnight UPS from the manufacturer, American Water Heater. The controller went out again almost exactly one year later and I again replaced it for the $30 shipping charge. In both instances the customer service person told me the malfunction was probably due to my not flushing the heater annually, causing a sediment buildup. The water to the heater not only flushed annually, but is filtered through a water softener and there was absolutely no evidence of sediment in the drain water or on the part of the control that is in the tank. Now it has stopped working a third time. I called Lowes about replacing it, but they only carry Whirlpool, so wont be buying a replacement from them.

On 1/24/12, I replaced a 15 year old water heater that had started to leak after years of faithful service. The new Whirlpool unit heated water to a tepid level only, and that was obtainable only after running several faucets at a time, full bore. I used the product manual to trouble-shoot and was unable to find the problem, so I called Whirlpool customer service and was told that I would need to have a plumber come and and inspect the plumbing before a technician could be sent to check the water heater. I was not very happy about that, but complied. The next day, a plumber inspected the lines and fittings, tested the pressure and agreed that the problem was likely a faulty water heater. That cost me $95.00. I called Whirlpool again. This time, I was told that I should have had the plumber call Whirlpool while he was still at my home! The customer service representative agreed to authorize a service call, and I was given the phone numbers of three companies to choose from. Apparently, I chose wrong. The plumber seemed experienced and was very friendly. He was at our home for about 40 minutes, made a cursory inspection and said the problem did indeed seem to be with the unit, and he would return to his office to contact Whirlpool and arrange for a replacement unit and he would call back. Tellingly, I realize in retrospect, he did not give me a receipt. After several hours, I called the company and was told Whirlpool had not yet called them, and if I did not hear from them soon, I should call Whirlpool myself. This seemed reasonable to me, and I did so, at which point I realized I had been lied to from the start. The Whirlpool representative said that the service technician stated that he had run an isolation test, obtained hot water from the water heater, advised the homeowner (me) that the problem was in the plumbing, and I possibly had crossed lines. She also told me that the technician had said that he had difficulty making the homeowner understand what he was trying to explain. A complete and utter falsehood. I asked her how an isolation test was carried out, and that I would call the plumber to see what was going on, as this was not what we had been told. I was livid and called the plumbing company back just in case there was some honest mistake. Of course, there wasnt. I would like Whirlpool to be made aware that the company that they contract with is disreputable and has a history of deceitful practices. I found many negative reviews, and in fact the sort of treatment I received seems to be their modus operandi, no receipt, never a call back, assure the customer their problem will be covered under warranty, misrepresent the the service performed. The reason I add this last statement is that at no time was the new water heater disconnected, drained, refilled and allowed to return to operating temperature; the so-called isolation test a process which Whirlpool told me takes about two hours. This test did not take place. I previously stated that the technician was only at our home for forty minutes. There was no test of water temperature. I have since replaced my water heater with another brand--it works fine and there were no plumbing problems! I thought the name Whirlpool meant something. I have owned quite a few Whirlpool appliances over the years, in fact my new washing machine is Whirlpool. But I am definitely disinclined to purchase this brand again. I am so disappointed with the service I received from Whirlpool, a huge waste of time and money, and I am out $95.00 for nothing. I think Whirlpool should reimburse me for this, as the original (honest) plumber was correct. My water heater was defective and should have been replaced at that time. If it had been, you would probably still have a customer.

Whirlpool Cabrio wtw6400 - Never, never, never will I purchase a Whirlpool product again! I spent nearly $1,500 on this washer and dryer. The washer ties everything into knots and has had several problems, most recently the bearings going out! I just called customer service who said they would send a repair man, approx. cost $370. What a rip off! I strongly encourage everyone in this same boat to call their customer service complaint line and/or consumer reports. I bought from HH Gregg and will never shop there again either.

The Whirlpool side-by-side had the space and durability we had hoped for in the price range we shopped in. It lasted longer than the refrigerator it replaced.

Mind you, Whirlpool products that we have purchased in the past have been satisfactory, but gas hot water heaters, no! About four years ago we purchased a Whirlpool hot water heater that went out in a little over a year. After spending many calls and time, we found out that the HWH was on soft recall. Whirlpool credited our account, but this was to purchase another Whirlpool, which we did. We paid for installation. About 2 years later, it has gone out. Same problem. Lowes says not their problem. Whirlpool says it will pay for the part only. Plumber will cost 150-200 dollars. All the plumbers I have talked to will not repair them, then they are held responsible when it goes out! As a disabled Vet I cannot afford to throw 400-600 dollars away. And, Whirlpool tells me that if they give me an RA number to replace the HWH, it will have to be a Whirlpool from Lowes. Great! Whirlpool quarterly report looks very good. Mine doesnt look as good. What can be done about a poor working product? Or is this too big to fail? Let me know.

I purchased the Amana washer # NTW4560YQO 10 months ago - when I put on the warn setting I would get an alternate cold warm but a warm wash. At the beginning of July suddenly all I got was cold water. The machine is still under warranty so I called and I got an authorized repair person who came out and replaced the mixing valve.. then I went to wash clothes and yes all I got was cold water. The authorized repair person came out and could not figure why. He called Whirlpool tech dept and they told him it was working the way it was supposed to. Now it does not give any warm water so I do not know how the tech person can make that statement.They then sent yet another authorized repair person from a different repair company and yet again the tech person said it is working the way it is supposed to. IT IS NOT WORKING THE WAY IT WORKED WHEN I PURCHASED IT AND THE WAY IT WORKED FOR 9 MONTHS. When I called customer disservice they kept repeating, our tech people say it is working the way it is supposed to. Then they tried to tell me it was the ground water. I want to know how many others out here have had the same problem. I really feel this is a defective machine and I want my money back or I want compensation and an acknowledgement that there is a problem with their crappy machine.

I replaced our old 50-gal water heater (10 years old) with a new top-of-the-line Whirlpool 50-gal water heater in Feb 2011. The Friday before Memorial Day, the heater went out and the pilot refused to stay lit. I called and jumped through all their hoops and finally figured out that it was the gas valve, because the pilot goes out as soon as you release the button and the milli-voltage reading is ok. They sent me a replacement and it cost $145 to have a plumber come out and install it. We were without hot water for 5 days. Now 9 days later, the pilot keeps going out. This time I can re-light it, but after the water heats up, it is apparently going out again. They refuse to replace a 12-year warrantied water heater that is only 2 years old and I am going to have to hire a plumber again to come out and attest to what we already know. This water heater is extremely loud. When we had it installed, I read the reviews and there were similar complaints (sounds like a mini jet engine). We dont seem to get as much hot water as we did with our old builders grade heater. This is a bad buy and I would advise anyone looking to purchase to look elsewhere.

Whirlpool should be ashamed for making a terrible machine. It does not get the clothes clean and it is always breaking down. It is not worth the money. I have never ever had a washing machine act like this. I have been RIPPED OFF!!

Whirlpool refrigerator - I purchased $6950.93 in Whirlpool products in one day last year at HH GREGG in Lexington, Ky. The refrigerator was purchased on that day September 18, 2012 and my kitchen wasnt going to be ready until December, but I wanted all items bought for measurements (specs) for the new kitchen designer. HH GREGG delivered to my garage October 26, 2012 because they couldnt hold any longer, but when we purchased that day they promised to hold till December when my kitchen would be finished. I have Proof from the kitchen installers the day they finished, December 28, 2012, was the day the appliances were installed. Well here I sit typing this letter on January 7, 2014 and my Whirlpool refrigerator is as of right now is in need of a compressor while losing approx $1000.00 in purchased food. In other words, approximately $900.00 in repair cost. Isnt Whirlpool a large enough company to stand behind its products when I paid $2599.00 for this refrigerator for at least one year from installation instead of purchase date? My fiancee has been trying to work out a solution with Whirlpool and the parts are on back order now. For at least two weeks we have been without a refrigerator and have two young children. Doesnt it show that the parts being on back order from Whirlpool, barely being a year old prove the defective product is being sold to the public daily? I plan on going further with this action due to the name Whirlpool all over my kitchen which disgusts me. Im going to write every columnist I can and do all I can with what little resources I have against this large company if no one helps us. This is absolutely an injustice against consumers...

Whirlpool gas range convection oven - I have only had this range for 2 weeks. Manual is sketchy to say the least. Purchased from LOWES - salesman were not well-informed. I have had to do a chat to find out information. Range looks great but performs poorly. Takes a while to heat anything even on high and on large burners. Grates are too heavy. I am sorry I did not see the editor review before I purchased. I have not used the convection so I cannot speak to this but my choices were limited when I purchased and I did not want a convection oven and other ranges would not purposeful for my use.

Bought this washer/dryer set Jan 2020. No agitator but has nubs in the bottom. Huge washbasin that will have 5” water in the bottom. I watched the was cycle and my Nursing scrubs NEVER went underwater...ever. Yes, we made sure the center was wide open and didn’t cover the center, at all. Filled the basin 1/3 full. My daughter’s sweaters had been rubbed together so aggressively in the basin they were unwearable because the knit was pulled and fuzzy. Looked like they were run over in the street. Soap never rinsed out of the clothes. Two daughters developed skin rashes. After I took my clothes to a commercial washer and rewashed them, no more rashes. My mom called Whirlpool. They tell us use NO MORE than one teaspoon laundry soap. LOL! There isn’t even enough water to get the clothes wet! Try Deep Water cycle... Got 6” of water. Load requires an hour and 15 minutes to wash!! Machine is outrageously loud. Now the dryer... Takes over an hour to dry clothes. Not towels or jeans..just cotton t-shirts, nurse scrubs, socks. Takes two dry cycles. Bottom line? Two and a half hours to get one load of clothes that have soap residue and aren’t clean. Whirlpool is aware. DO NOT BUY these! You will regret it!

Even the repairman said Whirlpool isnt making them like they used to even though they are charging more for newer appliances. The freezer has clogged, ice maker already broken, have to replace $400.00 for just the icemaker. As a real estate agent, I will make sure and let our new home buyers never to purchase Whirlpool again!

I have fought with this issue hundreds of times over the last 3 years. My old water heater work fine until it started leaking, I bought a Whirlpool 40 gal gas hot water heater from Lowes. Worked fine for the first month, then this pilot light issue started popping up intermittently. Now the damn thing doesnt want to light at all. I WOULD NEVER BUY ANOTHER WHIRLPOOL PRODUCT THE REST OF MY LIFE, and I will tell everyone I know that WHIRLPOOL Products are not quality products. DO NOT BUY. There have been so many class action lawsuits about this product and Whirlpool keeps on selling this junk. Im so frustrated with WHIRLPOOL customer support I cant think straight. To reduce your headaches in life, do not buy Whirlpool products as they are junk and their customer support is terrible also.

I like the washer for the most part. The thing I dont like is that even though I always keep the door open after doing a load of wash, the gasket continues to grow mold requiring me to do a monthly bleach/sanitizing process which is different than doing a bleach load of wash. The gasket also needs to be cleaned frequently. This is in a front loader.

This is a comment for the person with the ice maker problem. I have a side-by-side, in-door ice dispenser that clogs up. First sign of problem is either the ice wont come out or it comes out crushed. What happens is frost builds up in the path the ice takes at a couple of different points. The only solution I have found is as soon as the problem starts I turn off the ice maker using the switch on the inside of the freezer. Then let it empty with normal use (if you wait too long youve increased your problems). The release button for the ice bin has frozen by now so you cant just lift it out. The bin needs to be empty. When it is empty, work the bin loose and take it out. Youll find that frost and maybe cubes have collected, frozen and blocked the passage. Be sure to turn the ice bin on its side and spray water into the undercarriage to melt and remove all the ice build up there. I use a hot sponge to melt the frost in the ice tube and then dry everything. This gets messy so be prepared to have water on the floor. Dry the ice bin and reinstall it. Ice cubes will be ready to drop from the ice maker so it wont be long until you have plenty. I live in Florida with high humidity so need to go through this process about once a month. Its a pain, but now it is just part of owning this unit. Good luck and hope this helps.

We have owned our side-by-side model # ED5HVEXVB02 for just over six years now. The first thing that went bad was the ice machine (just days out of warranty). Over the next 4 years weve had to replace 2 of the drawers; they break really easily. Here we are just 6 years out and we are on our 3rd icemaker. This refrigerator is a lemon. I sincerely believe they designed an inferior product so that they could get you hooked. We probably would have been better off after the first issue if we had sold this lemon instead of spending all of this money and future money that it will take to keep this product going.

I purchased a Whirlpool Refrigerator Model GB2FHDXWB07 a little over 2 years ago. The first one did not work properly within 6 hours of being turned on. Every few minutes it sounded like the compressor was trying to kick on so it hummed then shut off. Best Buy wanted to fix it but after much arguing with them and Whirlpool they brought me a new refrigerator. Now, the same thing is happening. Best Buy has no record of me purchasing it and Whirlpool has no record of me registering the warranty, which would be outdated anyway (over 1 measly year). So, they offered me a Repair and one year warranty $329.95 which means Im now up to about $1500 for a basic refrigerator that has not even lasted 2 1/2 years.The other option to fix it is to pay a local company $90 for the trip and diagnosis plus parts and labor. That will be around $550 depending on how fast the technician works. I will never buy another Whirlpool anything. My washer and dryer also have had problems but I wont even go into that here. The one good thing is the poor girl who took my call was very nice and acted as if this is a regular occurrence. Good luck if you buy a Whirlpool. They are garbage.

We bought our Whirlpool refrigerator model # WRT318FZDB02 July of 2019. We liked it very much. The beginning of January 2022 we started having issues with things freezing. A few days later nothing got cold. The appliance technician that checked it out said our seals on the compressor were bad and needed a new one. He told us we were better off buying a new refrigerator. I contacted Whirlpool support and they told me the same thing. Our previous refrigerator lasted over 30 years!! I would think Whirlpool would make their refrigerators last longer than 2 1/2 years!!

The washer (Cabrio WTW7800XWO) was less than 2 years old and we had a motor go out, so we paid a repairman to come out and repair the machine. The total cost was over $300. Now 2 months later, we get another code on the machine and Whirlpool says, We are sorry but there is nothing we can do, but if you would like to pay $219, we can get a repairman out there to check out the machine and repair it. Theyre also giving the machine an additional year warranty. Shortly after that, I noticed the lid was not staying up when I opened to put clothes in it to wash. So since I was wondering what was happening, I looked at the lid and to my surprise, the springs that hold the door up when open are built into the plastic lid cover that has a see-through glass on it. Right where the springs are located, it must be a stress point and the plastic lid has since cracked and is almost about to break off. I am now in the process of ordering another lid and Whirlpool offered to sell me a lid for $226 but I think I shall buy it from someone else as I dont want to put any more money into Whirlpools pockets. We paid over $1000 when we bought this machine. Now it is about 2.5 years old. I hope there is a class action lawsuit on Whirlpool as I will definitely join in if there is. This company needs to go out of business if they continue to sell machines like this that have so many problems especially when they are less than 2.5 years old. Goodbye Whirlpool. You have lost many more customers as I shall be letting everyone I know about all the problems and complaints about this machine.

Sturdy, durable, and flawless operation, from the 5 multi style smooth top elements to the self cleaning convection oven with the secluded bottom element. It is a sleek clean looking appliance, and its the best weve ever owned. To one that says they dont make them like they used to, I say thank God!

My experiences using Whirpool ranges and ovens have been very positive. As a matter of fact, that is the brand preferred by my family through several generations. Durability, reliability and warranties have been the main features we have found useful. Most of the ranges and ovens have been replaced at home, always with Whirlpool brand, but with added improvements that manufacturer come up with, in order to integrate our devices to the latest technologies. I would recommend this brand to the readers, friends and neighbors.

I used my self cleaning oven feature and the fuse blew, leaving my oven with no electric current. I had to replace the fuse at a cost of almost $300 two months after the one year warranty of the oven expired. The technician suggested I no longer use the self cleaning feature since it will continue to melt the fuse wire. The oven becomes too hot, so I have an oven that I paid for with a feature I cannot use. I would not recommend this product.

I bought a Whirlpool water heater 5 years ago and after one year I had to replace the thermocouple every 3 months. Each time I call to complain, they would just send me a new thermocouple. I asked them several times to replace the item and they refused and just continued to send me replacement parts and refuse to honor their warranty. The water heater had some type of defect, but they still refuse to replace the item and did admit on the phone they have records of several parts that they sent.

I purchased a new Whirlpool Cabrio washer/dryer set 2 1/2 years ago (Jan. 2009). I have 4 kids and do lots of laundry. This is THE WORST appliance, namely washer, I have ever owned! I so wish I had researched this product more. I ditto everything that has been said about this washer. It tore up so many items of clothing, I lost count and does a horrible job of getting stains out. I contacted Whirlpool on several occasions only to be told that they would send a technician out to see if there was something wrong. The technician would report that the washer was working properly and Whirlpool would then tell me, sorry, we cant do anything about it. I asked them if a washer was supposed to clean your clothes and unravel them? Yes, it is supposed to clean them. Well, its not doing that. No, it is not supposed to unravel and destroy them but well, it IS doing that! Therefore, the washer is not working properly. Just because a technician can not physically find something wrong with it, doesnt mean it is a poor functioning washer. This company should better learn very soon that you must stand behind the QUALITY of your products or you will soon be out of business. I will never purchase Whirlpool products ever again nor would I recommend it to anyone!