Liked the look of Dacor oven and fit in with remodel. Relay board replaced year after warranty - $600. Then after 8 years of light use (have Thermador home pro stove), another circuit board failed, part no longer manufactured. Oven now worthless and headed for landfill. Outrageous! Large national appliance retailer says Dacor not reliable. Daughter had major problems with Dacor fridge. Have purchased Kitchenaid replacement on recommendation of same retailer. Built to not last...shame on you, Dacor.

I purchased Dacor Brand cooktop, oven, microwave and dishwasher. The dishwasher quit working after four weeks. Price tag for the dishwasher 2,800. Three weeks later Pacific Sales in Corona will not take the dishwasher back and replace with a new one. Dacor is struggling to provide a service tech in my area to look at the machine and honor the warranty. In the mean time I am shelling out money for Dawn dishwashing liquid and washing the dishes by hand. Complete JOKE. If you want a brand that will not stand behind their product... purchase Dacor. Want a salesperson who will talk up a brand but the Store washes their hands of the transaction after payment, shop Pacific Sales in Corona Ca.

I have had nothing but trouble with a wall oven I bought in 2010. Basically just bad electronics. I finally replaced the oven in 2014 and had to get another Dacor to fit the opening. The new unit still does not heat evenly and is consistently off by about 50 degrees. Customer service is not helpful at all. Local repair shops cant really fix issues. Terrible company. Cant figure out how they stay in business.

I have 2 single ovens side by side and have a cooktop and ventilation system - my experience with the cooktop and vent (2000) was so good that I did not hesitate to buy Dacor MorS130S ovens. They were installed in my new kitchen in September of 2012. I had my cooktop and ventilation system reinstalled. My daughter accidentally cleaned the oven without taking out the GlideRacks (which are hard to take out). We oiled them, etc., like the manual says if they are accidentally left in - they will not glide at all and now I am being told $300 each to replace excluding the cost of the service call. This is ridiculous. What kind of design is so poor that racks would get in this condition? I had Bosch ovens before and their warranty was wonderful and I, luckily, bought a Miele dishwasher which has a 10-year warranty. I would not buy Dacor again because of the warranty and because of this problem. I am beyond disappointed as I love my cooktop etc. I feel that Dacor should at least pay for part of these GlideRacks.

I own a complete Dacor Kitchen, with many appliances. They are the highlights of my Home. Great features: fast induction cooktop with an efficient silent hood, versatile refrigerator, reliable oven, and of course the always dependable dishwasher. This is My Dacor Kitchen!

We had a ongoing problem with a wall oven that was purchased in 2006. The most recent complaint was a oven glide rack that was not working. After complaining about it to one of their staff, they listened to our frustration and are sending us a new rack at no charge. My hats off to the great people at Dacor. Thanks for your understanding. Al

I purchased a Dacor refrigerator. I needed to order filters. I called Dacor and ordered paying $178 plus a $29 2nd day shipping. They sent the wrong filters. The invoice is right. Outside box is right but inside were two Whirlpool filters. I called and asked them to send return label to ship back and to send the right filters. Deidra, the manager in customer service, said No, you must return those filters and yes, you were sent the wrong filters. They will come back into our warehouse and we will then send out your new filters. I said I paid 2nd day because I needed them now. She suggested me paying for two more. Whatever. I told her to send return label and I will order somewhere else. I wish I would have seen 226 consumer complaints before ever ordering anything from them.

My oven would not work. Neither the broiler nor oven element would heat. The dealer from whom we purchased the range had gone out of business. So, I wrote to customer service on the Dacor site. Dacor customer service was back to me within 24 hours with a suggestion on what might be wrong. My husband followed the easy directions and my oven is now working! I am very happy with the prompt reply from Dacor customer service. They even provided a dedicated phone number if we had problems.

Updated on 11/29/2018: Further to my recent review of my Dacor wall oven, I went to a high-end appliance store yesterday to research replacements for my microwave, oven, warming drawer installation (so, yay, I get to spend $13,000-plus to replace items I have had for only eight years). I cannot verify the accuracy of this, but the salesman explained the problem. For a period of time, Dacor and Viking used the same third-party supplier for their relay boards. Unbeknownst to the companies, the supplier substituted a part that was later discovered to be defective. Unfortunately, all replacement relay boards contain this part, so the problem will recur repeatedly, as many on this site have discovered.As bad as the cost of periodically replacing the board is, the unreliability of the oven is worse. As happened last time, mine works OK sometimes, burns everything other times, and struggles to get to the desired temperature other times. And because the behaviour is unpredictable, it cannot be reliably recreated when a repairman visits. I have had one email from Dacor and I responded with the information requested, then nothing. I suspect that they know they cannot fix the issue in a permanent way, so theyre just hoping all of us with this defective part will just go away. It looks like newer models that look like mine are still available, but I refuse to pay $5,000 on the off-chance that it has a better relay board. I am looking at Miele replacements.Original Review: I have had two Dacor wall oven, microwave, warming drawer installations. The first one was only a couple of years old when we moved, and Id had to replace the microwave, but I put it down to a power surge in the house after an outage. I have now had the same set in my new house since 2010. I have had to replace the microwave again, but not because of a power surge. It just stopped working. The oven has been a complete nightmare. The probe broke and although I had it repaired, it never worked properly, but the worse problem is that I am about to have to replace the electronic board for the SECOND TIME. When the problem occurs, the oven heats up to the setting but the element just stays on. I all but ruined an expensive cut of meat on the weekend – with company coming, no less – and just had to throw out a batch of muffins. I am considering tearing out the whole installation and getting another brand that doesnt destroy my food. It would probably be cheaper than having to fix the oven every year or two and replace the microwave periodically. These appliances are garbage.

Dacor appliances were installed in a new home I purchased. The refrigerator has been out of service every single year since purchasing the home. So far, two thermistors, one power supply board, one drip pan heater and one ice maker. Every time the unit fails, I have to wait several days for the authorized service provider to come to the house. That will then result in the need to secure a part that will require anywhere from three days to three weeks before the unit can be placed back into service. As you might guess, perishables dont last that long, so every event results in the loss of hundreds of dollars of food. After yet another extended outage experience, I called Dacor to find out what they might propose to make sure my refrigerator actually performs in a reliable manner (apparently I didnt get the fridge with that feature). The short version of the story is that they not only failed to ever apologize for the fact that their product doesnt work, they insisted I produce detailed documentation covering the last four years of service before they would consider taking any action. Shame on me for not keeping all the invoices from the two service companies. After numerous exchanges, an offer to pay for the part associated with the last repair, not the labor, was the best they could do. Apparently, $250 is too much for Dacor to invest in a customer who has paid several thousand dollars in repair bills and lost hundreds of dollars of food for a unit that is four years old. This is a company who obviously cannot design a product that works consistently and cant provide after sales support in an effective manner.

This is my first DACOR product. Did not know too much about the brand. Did some research and read reviews online & decided to try a microwave in a drawer since I needed to save counter space. We use it all the time and so far it’s worked great. The color blends well in our kitchen even with the microwave being the only DACOR we have. DACOR customer service has been great and professional when I needed to register the unit. I would recommend the DACOR brand to anyone when they are looking for a premium appliance and anyone who comes to my home comments about how lovely it is. Thanks DACOR.

We have a Dacor gas range RSD30R that we bought to upgrade our kitchen in 2002. We have had several issues with the range to date. The first issue we had with the range was the auto lock for the oven cleaning cycle that failed in 2007. It was not covered under warranty and cost $88. The second item to fail were the oven door springs. They also failed in 2007 and covered under warranty. They failed again in 2017 and had to be replaced for a second time. The springs are too weak to hold the weight of the heavy door. $68-$78 for the springs. The springs could easily be changed out as the brackets are still good but they only come as complete units. The last item to fail were the ignitors. Only one ignitor failed out of the four but as the spark module ignites all burners every time any one is turned on, premature failure could be expected as all ignitors light every time. This time the part is no longer available from Dacor. Dacor does not support any products they build after 7-8 years. Parts will no longer be available. I would not recommend Dacor Appliances to anyone as the manufacturer does not support their own products very long. I purchased Dacor to buy American and I regret it now. In contrast every product that Miele made even 20+ years ago, parts are still available directly from Miele and other suppliers as well.

This is a follow-up to my prior comments on the 30 Dacor wall oven. After posting the prior complaint, a Dacor customer service representative emailed me immediately the following day asking for details on the problem. The Dacor rep immediately called my repairman, notified me that they were working on a solution, and then followed up with a solution that exceeded my expectations. We are very satisfied with the outcome and should have called Dacor directly at the onset. Thank you Dacor!

We purchased a very expensive Dacor double convection oven about 15 years ago. This was based on recommendations from friends who do a lot of cooking like we do, and the mistaken thought that this US company would be more inclined to support any future problem. We now have a problem with the control panel. Dacors only response is that they do not make the part anymore and cannot help us remedy the problem. They even had the nerve to say that they would give us 10% off a new one. Except for the annoying buzzer sound, the stove works well. Buying a new one is a financial burden we never expected or want to accept. We are telling all of our friends to stay away from this manufacturer. I wish I did not have to give Dacor any stars.

We purchased a Dacor gas range in 2005 for $2000. In a short time the plastic trim around the knobs cracked, and the glass in the oven door had not maintained its seal. I contacted Dacor several times and was told to take a picture and send it to them, then they could decide a course of action. The course of action was that I would pay for materials and labor. I decided not to do that, and eventually I will replace the range with another brand, never a Dacor!

DCT305SNGH - I have owned this stove for about 3 years already. From the very beginning it has been trouble. The lights that turn on when a burner is on broke immediately. The place where the gas comes out and ignites is black and hard to clean. The grates are rusty, the finish has come off. The indicator knobs dont reflect what is happening in other words if it is on the lowest setting you dont have any indicator marking. It is hard to clean and scratches very easily. I have had the service person out about 5 times until they decided to send me many new parts. These arent any better. It is just a bad product. Basically the warranty is useless if you keep calling for the same issue. They say, This is the last time we will fix this issue. Sadly I always heard this was a great company and I waited 7 years to save up for this stove and boom rotten appliance.

Im planning a kitchen remodel and stumbled on this site. I have a Dacor dual fuel range (stove wont light, oven wont hold temp), hood (light wont stay on consistently), microwave (replace once, okay now), wall oven (panel out) and warming drawer. Only the warming drawer is working correctly. I live in rural Kansas and I cant get anyone to do repairs. I really like the design but... its time to move on to a new brand!

Bought expensive refrigerator in Miami. And because I live in Miami 2 months in year use and tern in refrigerator only for 2 months. Every year have problems for thousands dollars. Company keep changing parts. I keep paying. Same problem every year. Big mistake to buy Dacor appliances. Regret very much and angry. People who fixing they know nothing. Only money. Very not happy. Looks like new. Today will throw on the garbage.

I have an Dacor column fridge and after 18 mths (under warrant), its not cooling. Its been 3 weeks, 2 repair visits and Im still out of fridge. Repair person said this is a known issue. If this is the case, Dacor should be proactive and reaching out to consumers under warranty to get this fixed instead of waiting for complaints. Interior trim kit is not included in purchase price which is ridiculous for the price of this fridge. Would not recommend!

I purchased a column, panel ready fridge and freezer. There was a promotion for 10% rebate, which took me 3 months of emails to obtain and they only issued a partial rebate even though I supplied them with proof of purchase. The service was dismal. The app for the cameras and interface with the appliance hasnt worked the whole time I have had the units. They look pretty and work ok as far as cooling, but for the price they charge they should provide exceptional customer service and being that Samsung owns them you would think that the app would function.

The Dacor gas range/ oven and wall oven were here when we bought our house in 2010. I would never buy any Dacor product again. I will have to look for a replacement for the gas cooktop range. The Dacor gas cooktop is OK except that EVERY time you turn on a burner, one or two of other igniters start clicking and wont stop until you find which one it is (not always the same) and turn it on and off. Please heed this and all the other warnings from the choir. DO NOT BUY DACOR!It is all very expensive junk. The oven temperatures fluctuate while baking. The oven range unit is out of warranty. So our home warranty AHS covered it but they kept sending out the same grubby slob who never fixed the problem but did charge us for the $75.00 service fee. They replaced the oven controller and the temperature sensor. This did not fix the problem. We have a full size oven that we cannot use! Then F1 beeping nonstop, and we have to turn power off to stop it. Now, out of the blue the downdraft fan just started extending and retracting over and over again with no way to stop it without going back to the electrical panel and flipping the breaker that it is wired into. That leaves us with no kitchen and no bathroom plugs! I hung up after 35 minutes on hold. I was just trying to find a certified technician in Bend, OR. Piss Poor Products and Very poor customer service.

I bought DCM24S DACOR 1.5 CU CONVECTION MICROWAVE-SS and after few months of using this product its banded on the back wall of the microwave that supposedly resulted from improper turntable placement which caused the turntable tray to make contact with the back of the oven. The quality of the product is very poorly, dont buy Dacor product!

Motherboard on my favor wall oven has been replaced twice. Repairman said not use the self-cleaning feature as that will cause too high of heat and melt the components. Seriously, Dacor? We spend this kind of money and have these type of repair issues constantly. Just glad I finally was told what might help resolve this - I’m ready for a new oven because of all these problems.

I purchased a Dacor Renaissance range for our new home. What a waste of money. Though I have not had any major problems with the performance of the range yet, besides uneven baking, the design is not user-friendly. To begin with, the gas burners share a grate. So when cleaning, you have to remove the whole grate on one side. The controls for the burners & griddle are very hard to see & I have to bend over to see which burner Im turning on. The oven racks are a joke. The two glide racks are very bulky with sharp edges. It is difficult to change the heights or to remove them for cleaning purposes. Though there are three racks included, it is impossible to bake with all three in the oven.I have a GE Monogram that I had purchased two years ago for another home, and I love it The Renaissance & Monogram are similar in price, but I unfortunately, listened to the sales person & let them talk me into the Renaissance. I realized my mistake in buying a Dacor immediately & contacted the appliance store. Even though the Renaissance had not been used, they would only give me a token amount of money towards trading it in for a Monogram. So, I am stuck with a range that causes me to swear under my breath every time I use it. Dacor could learn a lot from GE.

This week Dacor installed my 2nd replacement gas range. I remodeled my kitchen 3 years ago and chose Dacor because I had a great experience with their appliances in the past, had their oven and stove in my kitchen for 15+ years and never had a problem. With the first new range, the oven started to automatically shut off due to excess heat escape, so the safety feature would kick in and shut the system down, in addition the knobs would become very hot even when the over was used briefly, 12-15 minutes. I was very impressed and happy with the customer service through Dacor, they immediately gave me a brand new over. Exactly another year, the new oven had the same problem, door begins to not hinge properly and heat begins escape, knobs get dangerously hot.This week Dacor very kindly, replaced my appliance with the new Dacor Renaissance 36. I used the oven for 12 minutes on 400 and the entire exterior is dangerously hot. I do not have any children, however, if I did I would be terrified that they could seriously injure themselves. The exterior of an oven should not become hot like this. Has anyone else had this issue with Dacor? I feel they have been very responsive with regards to customer service however I want an appliance that is safe.

We thought we bought a quality product when we remodeled our kitchen two years ago and put in a $3000 30 inch wall oven from Dacor through their dealer Friedman’s in Knoxville. We had heard for years that their products were top notch and high-quality. I find it interesting that the oven has a self-cleaning function. However Dacor Technical advised me that if you use the self-cleaning function you will create too much heat and destroy the motherboard. Wonderful input after the fact. The oven now does not keep a correct temperature and we are advised that our oven is two years old and out of warranty and we should not have used the self clean function. Really? Why is the button even there. Do not under any circumstances purchase any Dacor product. I feel comfortable in saying Samsung will add absolutely nothing to the quality or service. The lack of customer care and concern is beyond reproach. One star rating is way too generous. How do you just walk away from your products. We used our clean function exactly once and nobody ever said it was a self destruct button.

My Dacor (3 years old) oven top burners igniters dont stop after being turned on, although they are burning. Ive tried drying them for many hours and applying rubbing alcohol. The front ones do this all the time when we turn them on. When we turn the left front burner on, the front right ones igniter does it along with the left! The back ones do it occasionally, so are still usable. Apparently this is a common problem with Dacor units. Why havent they fixed it? Weve had them fix the electronic panel at huge expense, and are not going to call them again. When the back burners stop working, well get another unit. Ive had gas stoves for 30 years and have never experienced anything like this poor quality. Its amazing that they are still in business.

I purchased the Dacor panel ready refrigerator and freezer column 15 months ago. The refrigerator stopped cooling -- in 15 months! These were 8k each!!! It had now been over 2 months without a working refrigerator and no end in sight. I will never ever purchase one of their products again! They replaced the compressor and 3 days later it stopped cooling again. What a joke! DO NOT BUY DACOR!

We bought our new Dacor CPS 130S wall oven when we built a new house in 04. First we had to replace the lower heating element. Now the touchpad (Dacor part # 13290S) is malfunctioning. The + button will not respond to touch. Called Dacor and was told that the needed part number was discontinued in 2009. I double-checked with a distribution center in San Antonio, TX, who confirmed that the part is no longer available. They referred me back to Dacor on the chance that Dacor would have one somewhere. Dacors suggested solution was that we need to buy an updated completely new oven, which would cost us several more thousand dollars. So here we sit with a perfectly good oven minus a touchpad to control it correctly. So much for buying reliable, U.S. made products and receiving good service. I thought there existed a federal law that mandates a company must make parts available for 10 years if they discontinue the product?

We purchased a Dacor dual fuel oven range in 2008 in conjunction with an extensive kitchen remodel. It was beautiful and expensive. It has had innumerable problems. 2008: One of the igniters broke requiring replacement. 2014: oven stopped working, required new relay board. June 2020: Relay board again broke, oven stopped working. December 2020: Oven stopped working, heating element broke. These were serious problems each resulting in 1-2 months without an oven as the parts had to be special ordered. We have not had an oven since December 2020 (it is now March 2021). We are waiting for a replacement part. In addition, minor problems included a broken indicator light and burner grating. Dacor customer service was only moderately helpful, referring us to local repair companies that had difficulty obtaining parts. Dacor has told us that this should last decades but we are seriously considering replacing it after 12 years because it is very unreliable. I would not recommend a Dacor based on our experience.

This range was installed in January 2003. The door on the larger oven was replaced soon after because it would not close tightly and still doesnt with the new door. I have always thought that the oven temperature is lower than it should be but have been told twice that it is accurate, tell that to the turkey. The heating element on the large oven was replaced 2 years ago. Four of the burners dont light and have to be lit manually, this has been going on for 10 years. The relay board has burned out and now has to be replaced, $800.00 fix. The technician just left and could not replace it, he couldnt access the tight spot that it was in and wanted to cut the barrier panel to get access to it. He decided not to do the job and told me to call Dacor to get another repair service, which I just did. I was prompted to write this after reading other reviews and remarks. I hope this helps someone out there to buy a different brand.

My Dacor Preference 30 double wall oven (model PCD227R) was installed on 5-14-2004. On 12-31-2007, I replaced the upper oven high limit switch for cost $146.56. On 5-19-2010, I reset the lower oven high limit switch for cost $95.00. On 8-27-11, I replaced main control panel (Bezel Assembly), whose parts cost $271.10. On 12-14-2011, I replaced the main relay board for $214.02. On 1-16-2012, I replaced main relay board again, and it is under warranty. On 2-3-12, I replaced upper oven temperature sensor for $32.09. I am awaiting authorized Dacor service technician to calibrate both ovens.

Purchased Dacor Induction Range w Convection Oven RR30NIS-C in October 2013 and LOVE this range. Accidentally broke the glass on the induction cooktop with falling object mid-March 2020. Only the glass is broken, and all other electronics, induction burners, oven, etc are functioning fine. Called Dacor support to acquire part number for a glass top for repair - obtained part number #701751 superseded by #702285, BUT was informed that the part had been discontinued and is no longer being manufactured or kept in stock. No other advice was given other than to discard the entire $6000 range. Multiple phone calls with service.I asked for a listing of third party part distributors and was referred to four distributors on the Dacor public website and given no other info. I called all web-based third-party distributors I could find in USA and Canada to see if anyone had the part in stock, with no luck. I contacted two technicians to see if they would be able to obtain the part through their channels, with no luck. I am an engineer, so I spent some time pouring over technical manuals trying to find a solution to replace the entire induction range cooktop assembly (top part of the range) with a later model, and although its possible, Dacor would not provide the ability to purchase an RNR30NI range cooktop assembly that could be fit into the existing housing on top of the range. The convection oven is completely fine, and I cannot believe that Dacor has given me no other option but to pitch a six-year-old $6000 range because they stopped manufacturing one fragile part made of glass. I would imagine that many consumers may be in the same position as I, as these cooktops are breakable, and accidents happen. I have reached out to Dacor support desk numerous times without resolution, and I am at my wits end with a $6000 boat anchor in my kitchen. What a waste of money! Poorly done Dacor!I would like Dacor to provide me with some sort of solution whether it be the part required to fix my induction cooktop, or a replacement Induction Range with convection oven, or reimbursement of the purchase price so I can obtain a replacement on my own. If I am not able to find a solution to repair my range, I will never buy from Dacor again! Dacor will discontinue easily broken parts without warning! You may spend thousands of dollars and not be able to repair your appliance after warranty expires!

Dispenser spits out ice cubes onto wood floor everyday. Told it is design issue and nothing can be done. We have to constantly check the chute is empty after used but we can be nowhere near the fridge for hours and hear ice pop out onto floor. My grandson has tripped and fell and me also. Im more concerned for safety than anything. Also our hickory wood floor is concern.

We purchased a DACOR double wall oven (MOH2275) in April 2012. We are waiting for service to arrive for the fourth time since we purchased the oven. I find this unacceptable. We have had 2 other ovens in the last 30 years and they did not need any service. In general I have found appliances to be of such reliability that I dont get extended warranties. DACOR gave a 3 year warranty on this oven and now I know why. Hopefully this service will fix it for a long period of time.On the positive side, the oven really works well. It is so well insulated that we feel very little heat coming off it. One serious flaw its overall operation is the reheating of the oven. If I bake something at 350 degrees and then want to reset the over to 450 degrees, the oven does not go into preheat mode and does not let you know when you reach the required temperature. I am hopeful this will last awhile and not have to be replaced for what we paid for it.

I recently upgraded my kitchen and had always heard that Dacor has been a reliable high end brand for kitchen appliances. Their refrigerators have a lot of space, and everything can be easily organized. All the appliances work as intended, and they also all look great. The stainless steel Dacor uses to make these appliances look smooth and clean, making it one of the most beautiful kitchen appliances I have ever owned. If you want a functioning kitchen with appliances that always look nice and shiny, then I would highly recommend Dacor.

Less than two years ago, we purchased a Dacor classic wall oven from a local high end appliance store in Durham, NC. Within a few months, the electronics started getting glitchy; the oven started beeping in the middle of the night. I turned off the beep, but other problems started popping up. I baked a pie which was half raw on one side and overcooked on the other side -- not exactly what you would expect from a nearly $5000 oven. Recently, the display has been blinking in codes and the oven has been turning itself off. When I tried to call customer service, I was repeatedly put on hold for 30 minutes after which the system disconnected me. When I finally spoke to a person, she was very rude. This is a horrible company, a horrible product and I deeply regret that the salesperson at the store talked me into buying this awful oven. I am extremely unhappy.

Five years ago we built a new house with a big open kitchen for entertaining and family. I like to cook. After talking to a kitchen designer and high end appliance dealer in San Antonio, TX, we decided to go 100% Dacor for the kitchen. What a nightmare! The oven was replaced within the first three months. Since then we have had two relay boards replaced (one within warranty, one not) and one thermostat replaced. When the oven is working, I like it very much. But it is a lot of trouble to get it fixed. The refrigerator defrosting until has gone out three times as well (once in warranty, twice not). Today the unit is not cooling at all. It is hard enough to find someone to service these units outside the big cities, so when we do find someone it takes days for them to get here to diagnose; days to receive parts; and days more to fix. I will never buy another Dacor product! I will say this, the Dacor headquarters have tried to help and even gave discounts on parts, but 5-year appliances should never have these many issues. Our last kitchen was 100% KitchenAid and we never had one problem with anything for 6 years!

Wish Id known Dacor issues when buying my oven. (Primarily for style - yes, assumed it would function as stated; high end brand). Thank goodness I DID NOT BUY other Dacor appliances. My 30-inch Dacor oven/cooktop burners work but finish started coming off quickly. Above range microwave handle broke within a year. MAIN PROBLEM: OVEN DOOR either wasnt properly installed because it doesnt close flush with unit or its hinges have loosened over the years. Although oven eventually heats, it takes forever. After examining door hinges closely, looks like oven has become unhinged - as have I. No loose parts seen. Recommendations? Other than STEER CLEAR OF DACOR.

I called the customer service number regarding my double oven. It just randomly beeps and now turns off. No error code displayed. It has done this on and off since 2003. Now it is happening all the time. I called customer service and they seemed to act like it is my fault and I need a new touch pad. I inquired and this is a recurring problem with this model. I could not get a straight answer from the person I was talking to. He just told me that if the repairman says I need a new touch pad, then I need to get one. Well I have been doing some research and this is a problem that seems to be haunting more people than I. We own a Dacor gas cooktop that has had to have a switch repaired. We own a microwave that has had two new circuit boards and now a beeping oven that gives no error code and turns off by itself. My advice, do not buy Dacor appliances.

We did a complete kitchen remodel in 2007. I wanted top of the line appliances, and I liked the look of Dacor. I spent over $10,000 on a refrigerator, oversize dishwasher, microwave oven and a warming oven... (I know). Within 16 months, everything started to fall apart. Of course it was over the one year’s mark so there was no replacing of the units on the manufacturers part. I have since replaced the motherboard on the dishwasher twice... total of 3K in repairs! I cant replace the dishwasher because it was oversized and we built our cabinets around it and no other company sell an oversized dishwasher. I have replaced the microwave oven with another one that looks just like it because for some reason it fried. The refrigerator constantly rattles and my husband and I are at our wits end because of it. The only thing that hasnt fell apart yet is the warming oven. Probably because we dont use it. I wouldnt recommend it to anyone. Its a total waste of money. Next time Im buying Kenmore. My old Kenmore is sitting out in the garage being a good and faithful second fridge.

The oven temperatures fluctuate while baking. The company was at first responsive. They replaced the oven controller and the temperature sensor. This did not fix the problem. When I called and left messages, there was no call back or response. Very poor customer service.

We just purchased our home in March of this year. The previous homeowner purchased a Dacor oven; it is electric & propane. She purchased the appliance after a complete home renovation in 2008. They lived in the home. After 1 year, they moved out and had it on the market. We purchased the home in 2012. As soon as we moved in, we noticed the oven was not working. We called an appliance repairman - $564.00 service call and part for a new relay switch. It was great; the oven worked. Not even a day later, an F1 error. We called them back out thinking they must have done something incorrectly. They then said we needed a new control panel. We did not have an additional $400.00. We just moved, so he said you could still use the oven. We did. We would use it and flip the breaker off so we did not have to hear the annoying beeping sound. Then I came home and bam - no display, no oven. We called a different Dacor certified appliance guy thinking the first company was just taking us for a ride and it was their fault. $572.00 later, we got a new control panel, but guess what, the technician did not even make it to his truck before beep, beep, F1. He came back in and then said we needed to replace the display screen - an additional $217.00 with no labor charge. We told the man to shove it. I had every plan of taking the oven to our back tank and using it for target practice. But in good business practice, since this company already invested $572.00, we could not ask them to eat the money, so we allowed a third fix of the oven. While the technician was here, the oven made a horrible loud sound and shot out flames. He insisted maybe it was due to it sitting for a week without use. He left. I never noticed this flame before when the oven worked despite the F1 beeping. Now it’s hit and miss. Some days it will shoot out a flame once until it reaches 200+ degrees and then you can hear the fan kick in. Some days, twice, I have had it happen 3 times. If my children were to open the door during this event, I am sure they would be seriously burned. At first I was thinking maybe it is normal for this oven to shoot out flames during preheat mode since after $1300.00 repairs maybe it is just not functioning correctly. But if it were a normal function of the product, to me it would do it every time consistently and not three times, or two times on some occasions. I hate to admit this but I am almost fearful of using my oven. I currently have a pie to put in for dinner and I’m thinking its 3:09 pm; I could set the oven to preheat while I run to get my kids from school so if it decides to blow up, I am not home and that is pretty sad. The last repairman we had come out said in his personal opinion, he wouldn’t have repaired the oven, because they are known for issues, and he would have gone to Lowes and spent $300.00 on any off brand stove first. We have considered that, but this stove is extra-wide and the cabinetry is built around it. So for us to purchase an oven to slide right back in it would be another $1300.00-$2000.00. We have issues with the burners not always wanting to light. I almost caught on fire lighting one because it shot out flames when it decided to finally ignite. Sometimes it just clicks. Currently, I am down to two burners when just two days ago all six were working just fine. Over Thanksgiving, it took no kidding 1-hour to cook brown and serve rolls because the oven did not reach the set temperature. We stuck my husband’s bbq thermometer to see. It was 256 degrees, not the desired 350 degrees. Does this stove have warranty? We have no clue as the previous homeowner purchased the stove. She claims to have spent $5,000.00 on this stove or more during their purchase. We do not have warranty on our home so for each repair, it is out of pocket for us, and currently we really are thinking any knock off brand at Lowes would be a better product than a Dacor oven and less of a safety hazard for our family.

I have an older cooktop. Yes it is 15 years going strong but I have ran into a few issues where I know the repairs would be pricey but especially the parts. After talking to a few representatives, they truly want to help you. Nothing is free and I don’t expect it to be, but I am glad they they helped me get my cooktop back to functioning again. I hope someone finds this helpful before reading or writing bad reviews.

Bought to replace 15 year old same model and I'm hoping I will get another 15 years out of this one as well!!! Great price and delivery!

I was and, I repeat, was a loyal Dacor customer. I gutted and rebuilt a kitchen 9 years ago and purchased a Dacor stovetop, oven and microwave. I remodeled my new house 5 years ago and again purchased Dacor stovetop, oven and microwave. Consumer reports provided favorable reviews of the appliances I purchased below.First red alert: The oven Model MORS130S and Microwave Model DCM 24S LED did not match. The microwave was green; oven was blue. The brochure was in black and white so there was no way of knowing that aesthetically they were a mismatch ... it was very sloppy(!) and very deceptive by Dacor. I mean when I waited weeks for my appliance order and the oven is already installed with a big fat ugly LED screen, what was I supposed to do, yank it out and start all over again? This was disappointing!Next, I was simmering chili on the stovetop (5 burner, gas) and, lo and behold, 18 flames started exiting through the turn knobs resulting in a meltdown. The gas was leaking through the tubes underneath the stovetop. I just happened to check the chili while I was gardening to watch the house almost burn down and btw, it was difficult to put out the flames because the natural gas was leaking under the unit. Seriously! I called customer service and they got hopping right out to fix the issue. This scared the heck out of me. It is negligent to have a product like that on the market.After about 13 months into the life of the Model MORS130S oven, the touch panel failed emitting a CO1 error message. I was told it was $140 to fix it and that the panel was defective, great quality there, Dacor. And the added joy to the CO1 error message is that the unit beeps intermittently all day and all night long unless the power to the oven is killed. Joy... now another issue - Model MORS130S oven LED lights are burning out. Seriously, what else will there be? Now its $175 for LED panel and another $100 to install by an authorized Dacor service man.So I called Dacor back again today because the LED light out was annoying me. They offered nothing. To be fair, my appliances are out of warranty but seriously, Dacor nearly burned my house down. They should be winning me back as a customer if they really cared about their customers and having long term repeat business. Never again, Dacor, never!

Warning: Warning, safety hazzard for all, adults and children. Recommendation: The knobs should be set on the top of the stove, not the front where children can reach. Control knobs should click when fire and gas is turned off, and highest flame setting should be at the end of the turn just like a clock. I inherited this range as new owner of the house. Today I used the high flame option of the gas stove. When I was done with cooking, I turned off the gas according to the knob position, front of the turn. Later I discovered the range was not exactly off. It was still hot but no flame could be seen.I checked by sight the control knob position, it was set incorrectly in off. Then I touched it and realized the knob actually has a bit more to go to the end, slightly before the off position. Therefore it continues to release gas with unobservable flame. This knob does not click when user turns it to the off position. It is just a silent knob with an inaccurate cue of a heavier black line for off and on indication. Besides, high flame setting comes at the beginning of the turn of the knob rather than the end, it is counter intuitive to our mind of increase heat by turning the knob further on, like our clock. Oven racks are hard to put back after cleaning. Once a rack almost tumble out while food was sitting on it.

Very pleased to say Dacor replaced our oven with a new one! I havent thoroughly tested it all out yet, as it was replaced the day before we left for a trip. But so far the top oven seems to be working properly. Need to use the bottom oven yet to check it is working properly.

We were out of state from December 21, 2014 to January 2, 2015. The condition of the refrigerator was discovered at about 9:30 PM on Saturday, January 2nd. Upon opening the door the Dairy Compartment Cover fell to the floor. We could immediately see the damage but did not know the source. As a result, the unit was turned off. The owners manual was consulted along with a review of the Dacor website. The office was closed on the weekend so Monday was the earliest we could obtain names of Dacor authorized repair agents in the Phoenix area. A authorized Dacor repair technician stated the light switch or light circuit in the board failed. The interior light bulbs located at the top of the refrigeration side of the unit remained on when the refrigerator door was closed. The heat generated by the continuously lit bulbs led to the melting and charring of the plastic light fixture. The light socket melted, the wiring harness melted into the socket assembly, light switch, and control panel. The heat was intense enough to warp the Dairy Compartment clear plastic cover, some of the adjustable door bins, and the interior door liners. Also, all food containers made from plastic such as salad dressing bottles, mustard, ketchup and mayonnaise, etc. were disfigured. Of course all the contents from both the refrigerator and freezer had to be disposed.Before leaving on an extended trip we had been following the instructions preparing for a vacation listed on page 19 of the owners manual. On our departure date the food that would not have lasted more than two weeks was removed from the refrigerator. The ice bin was emptied and the wire shut off arm was raised to the OFF (O) position. Note, page 19 does not mention to set the Sabbath mode when leaving for a short or long vacation. We were fortunate that the damage was contained within the refrigerator.

I own a complete Dacor Kitchen, with many appliances. They are the highlights of my Home. Great features: fast induction cooktop with an efficient silent hood, versatile refrigerator, reliable oven, and of course the always dependable dishwasher. This is My Dacor Kitchen!

We have 3 Dacor appliances that we purchased new when we remodeled our kitchen a few years ago. Our cooktop’s igniter continually clicks even when it is not in the light position. This only happens on the front 2 burners (the back 3 are fine). We have cleaned the unit and cleaned the igniters over and over. We have had 2 authorized Dacor service companies and another company look at our unit. Two said no fix exists; the other replaced a part after talking to Dacor and that did not fix it. When I called Dacor, they noted to get another service company and call them when they are here. I am concerned that this again will not work and I will have to pay another service fee.When they were here I asked them to replace a light in our double oven, but they noted they would have to remove the oven from the wall to do that and it would be costly, to which I said no thanks. Is it true that the oven has to be removed to replace a light? Another issue is that our double wall oven’s upper unit only gets warm to about 200 degrees. Another issue is that the microwave door open button does not move the door, we have to push it and pull the door open by hand. I have turned to Dacor service and to our local service techs and we are at our wits’ end. Any help here?

Dacor EO227SCH - double wall oven. Installed all Dacor appliances when we did a kitchen renovation in 2008. Stove top, Micro Wave and Warming Drawer each have been excellent. Ovens have been a nightmare. Dacor would not honor warranty 7 days after it expired. Had no less than a dozen service calls in first 3 years. Ovens conveniently have problems around holidays. Example: lower oven quit working two days before this Thanksgiving - last week! Paid a high price to get Dacor and have paid thousands and spent countless hours on service calls since. Am totally dissatisfied with Dacor products and the companys refusal to stand behind its product. I tell everyone who is contemplating Dacor not to. Did it today with a couple who signed a contract for a $1M home in N Atlanta. Builder specified Dacor and I strongly advised against it. Homebuilder is now looking at other options.

Purchased a Dacor freezer. Freezer does not come with outer panel. Understandably, because you can choose to put your own custom panel on or order one from Dacor. Found out Dacor was bought by Samsung, a few years ago. So I decided to order a Stainless steel door from Dacor. One of Dacors reps suggested I order from J@J international. I placed order and two days later they called back saying they cannot ship door to me UPS nor FedEx will ship it. They refunded my money, so I reordered from someone else. Got ss panel toe kick and handle. Opened box only to find out no hardware, brackets ss trim for sides screws and so forth. I assumed mounting hardware would be with door. So began the part search for parts. Come to find out Samsung changed Dacors part #s. Vendors who sell the parts could not come up with parts or told me not available. Reliable parts agent told me this. I was told they should have come with freezer. Meanwhile called back Dacor to someone who specializes in dealing with these issues. She took over 45 minutes of my time giving me the impression she was gonna resolve the issue. She finally said we have the parts and inferred that I must have not talked to reliable parts. I assured her I did. She continued to refute what I told her. I have been right at two months trying to get freezer door installed. I called an Appliance dealer in Salisbury Md. to get assistance. He told me when Samsung bought Dacor he dropped line. I now see why. It has been the worst experience I have had with a company that has absolutely done nothing but appear to be concerned and say they are sorry but do nothing. It looks like it will be another 750.00 to get a couple little trims and brackets and a few screws. If I had it to do over I would never have gone down this road. This has been a two month old nightmare that is still going on. Best advice I can give is steer clear of Dacor/Samsung. Was going to buy matching column refrigerator. Not now.

After less than a year after installation the oven continues to operate poorly. Its been recalibrate twice and a new control board installed. Did I mention the board had burned components? It still does not operate properly. Its at least 25 degrees off. Everything takes way longer to cook than it should. Thanksgiving was 2 hours late. Christmas was the same. Entertaining during the holidays, embarrassing. Now Dacor wants pictures to prove to truly see how poorly the oven is operating. I thought I bought a quality product but I was wrong. This is just following suit with the Dacor refrigerator I purchased and was replace months later.

Dacor Double Oven Model D0230 - I have had my oven since November 2011. I purchased an extended warranty at the time of buying the oven. Right after it was installed, I called and said they needed to come and adjust the temperature control. It was off at least 50 degrees. It never held the correct temperature. Since July, we have had to replace 2 relay boards, two other parts that should take care of erratic temperature. Then I noticed the gasket was turning black in the corner and my glass pack in the window was steaming up and not clearing. The extended warranty would not cover the glass replacement and I was charged $126. They said it was cosmetic, but this was so bad that I couldnt see through half the glass. The steam stained the glass and you could not clean it, because it was inside two pieces of glass. Do not buy a Dacor oven. In 38 months I have so many repairs that I have lost track.

This will be the third service call on my Dacor Built-in Refrigerator with the freezer making icicles and the fan making a loud noise. On top of that, I have two light bulbs in the freezer that went out from the ordeal. From my review of the complaints here on Consumer Affairs, I see Im not the only one with this issue. This is a yearly problem, and I hope Dacor would step up and resolve this for me since it truly is a poor design issue and no fault of mine.

I built my home in 2003 and installed a Dacor 30 wall oven. After several years of poor performance, we started to get an error message. Dacor suggested replacing a board for $300. That didnt work so they had me replace another $300 board. That didnt work so they told me I needed a new front panel and it would run about $1,000. That board is on back order and they dont have a replacement date. Thinking that its bad business to sink $1600 into a troubled product that has terrible reviews on the internet. We found out that once you go with Dacor, you need to stay with Dacor due to an unusual, nonstandard size.Thinking that Dacor has improved their product we ordered a brand new $3,000 Dacor RO130 30 wall oven. It arrived promptly and I removed the defective $3,000 oven and put in the brand new $3,000 Dacor RO130 oven. What I got was a dead brick. The Dacor customer service has been awful, and will not allow me to talk to anyone in their technical side. The oven is getting power. Dacor customer service wouldnt help me unless I could prove that the unit was getting power. So I had to get an electrician in to prove that I had properly wired the 4 cords that came off the original defective Dacor wall oven. Get service help? No chance. I live 100 miles from Seattle and no one wants to work on Dacor. So here I sit with a $3,000 brick. No service and Dacor has no clue on how they will service this wonderful $3,000 RO130 30 wall oven that is an out of box failure. I dont see how a company that has this bad of a product, two generations of defective ovens, bad customer service, reluctance from the repair community to work on their products will be in business much longer. If you are considering Dacor appliances, consider the problems that I am having. The nonstandard size of their ovens will lock you into future purchases to replace their products that dont last 10 years.

We got a U43 relay error on our Dacor oven of 4 years. When we finally add up the cost to replace the part, it will exceed $500 and Dacors only response is, Sorry, it is out of warranty. Of course I do not understand why a relay board on an oven would short out after a few years. Not happy and would not recommend the manufacturer.

I purchased a single wall oven in 2008 and 30 days out of warranty, the oven broke. Service required two service calls to fix the door magnets. A third visit was required as the oven codes shut down the unit. The last two service calls have been with the cooling fan. Now that the fan was replaced, the relay board needs replacement, too. I have spent $650 in service alone, which is separate from the cost of parts. There’s no help from customer service; in fact, the rep was downright rude. I will never purchase this brand again and I have told anyone who will listen not to purchase.

Perfect size burners and small oven. Cooks food perfectly about 25° less than you think. Great grill on top. Easy to clean.

My wife and spend $12k on a new Dacor range/oven 15 years ago. The range works well, the LED lights on the gas knobs needed changed once in a while, the oven door wouldn’t close properly and the heat in the oven wasn’t distributed evenly. All that we could live with. Then the oven died. The repair technician ordered the part. Samsung don’t make it anymore. We are now left with no oven. So we have spent $800 a year on a Dacor range that now doesn’t work. Thanks Dacor… or Samsung?

We have owned our dual-fuel Dacor stove for about four years. We purchased this stove because we needed a down-vent - this is how our kitchen was already configured. We had only the Dacor or Jenn-Air stoves as choices and went with the Dacor. I have been thoroughly pleased. Everything works consistently including the self-cleaning feature. Prior to this stove, we had a Thermador which was expensive and NEVER worked consistently. One feature or another was always on the brink. The Dacor is such a relief. And good looking, too.

I purchased my Dacor wall oven in 2008 and have nothing but problems. I have had two computers replaced for over $1000 each and other boards replaced. Problems started just after the manufacturers warranty ended. I consistently get a U60 fan error message, no matter what Im cooking and no matter what cooking cycle Im on. It works for about 15 to 20 minutes and then stops and there is no way to restart or reset it.

We bought 3 very expensive Dacor appliances when we built our home 12 years ago. They have been a total disappointment. The microwave was replaced after just a couple of years when it just stopped working properly - including needing to stop it by opening the door! The wall ovens have needed many minor repairs which have amounted to several hundred dollars after labor charges. I see on this post others have had to repair the hinges! Ours have been replaced twice! The broiler came loose and was hanging on one side. The internal light also goes on and off by itself - sometimes in quick succession. At times, it stays on and cannot be turned off by the light button but by banging the front of the oven! Ridiculous! The cooktop cooks very unevenly. It goes from simmer to boiling over. The ceramic material did not hold up very well either. It is supposed to clean easy. But there are spills that have left permanent stains and we will be replacing that as well. We have also had Customer Service tell us items have been discontinued so we have no choice but to replace these appliances since replacement parts cannot be purchased any longer. This is a warning to anyone considering Dacor - DONT WASTE YOUR MONEY! There are far better appliances out there!

We purchased a Dacor induction range 5 years ago which cost $5000 plus installation parts and service costs totalling $10000. Two days ago, an error code showed up indicating that the generator needs replacement. I contacted Dacor who states that the part is discontinued but that I could contact a refurbishing company (Corecentric) to send my generator to for possible repair. A service technician would have to remove the generator, I would send the part to Corecentric, then IF they can repair it, the tech needs to reinstall it. There are no service providers that Dacor referred me to that will service a refurbished part. Even if I wanted to try, I as an owner, cannot remove it myself because Dacor does not provide the service manual to do so. I spoke to Dacor multiple times about this problem and management stated that since the product is so out of warranty that they cannot offer any other repair option, compensation, or replacement even if the part is deemed unrepairable by Corecentric. When you pay $10000 for a product I expect it to last more than five years and that a reputable company would stand by their product and service. Essentially, Dacor inferred that we are out of $10000 because a part that POSSIBLY can be refurbished for $215 plus service costs, cant get serviced and Dacor takes no further responsibility. I have heard stories from appliance providers and service providers that since Dacor joined Samsung, that their customer service is poor and products have become inferior.

We purchased a Dacor built-in refrigerator in 2011. After just 5 years the warning beeper came on. We learned that the main control panel - built by Whirlpool - was defective. We then learned that Dacor did not have any replacement part for this model. Our only alternative was the purchase a new refrigerator. Amazing!! Dacor reluctantly gave us a partial credit for a new (KitchenAid) model. However at the end of the day we are out of pocket over $2000 because Dacor built and sold a defective refrigerator with no ability to fix the problem. Very unsatisfactory handling of this situation.

We purchased our home brand new in August 2006. The house was built and the appliances installed (but never used) in 2003. One of the things that sold us on the house was the kitchen being comprised of all high-end Dacor appliances (double convection oven, cooktop, dishwasher, and built-in microwave). Our excitement quickly turned to frustration. The first problems began with the dishwasher, which after several attempts at repair (circuit board) was begrudgingly replaced by Dacor, with “begrudgingly” being the key word. I have always found Dacor customer service to be rude and dismissive - with the only way that I ever received a satisfactory outcome, being via threats of contacting the BBB and Missouri Attorney General.About a year after receiving the replacement dishwasher, the internal racks began rusting badly. Once again, I called customer service who originally wanted to sell me new racks at a discount. Only after another persistent round of explaining that high-end dishwasher racks should be made from a material that doesnt rust, complaining and threatening, did I receive new racks free of charge. I was also informed that they had changed rack manufacturers and that would eliminate the rusting problem. Wrong. It has now been another couple of years, and the new racks are rusted worse than the previous ones. That is just the dishwasher.Our Dacor microwave display began slowly losing its LED display about 2 years ago. Lately, the microwave interior lining is beginning to disintegrate and rust through. One of the burners on our gas cooktop makes a constant popping noise when lit. The top half of our double convection oven no longer heats beyond 250 degrees. I realize that our appliances are now significantly beyond their warranty period, so I am no longer even attempting a resolution through Dacor. I will most likely ride these appliances into their graves and replace them with another brand. I am writing this mainly to alert others about my experiences with what I believe to be Dacors total lack of quality at a premium price. In my opinion, Dacor is all style and no substance.

We purchased a Dacor oven stove top. It is about 10 yrs old now. 3 years ago we had a problem with the ignitor and had it repaired and paid over $200.00 for the repair. 3 Years later we are experiencing a similar problem with the ignitors clicking on and not turning off. I have called for repairs on this but expect this will cost me some more money. I have been online and have seen similar complaints leading to believe that this is a common problem and I would avoid purchasing Dacor ignitor products for the stove top, until resolved.

We bought this oven and had it installed a month ago. Id love to love it, but unfortunately I dont even like it. Immediately after installation I noticed the touchpad for the bottom oven didnt work. I called Dacor and spent quite a bit of time while someone did the standard is the power on run through. I was told someone would have to call me back in the morning, at 9 am. The next day at 10 am having not heard a word, I called back. I was given the option to be called back (you wont lose your place, and our first rep...) Great! Nope. Four hours later still nothing. I called back again. Someone answered quickly and after a short call arranged for a service person to come out in a few days.Fast forward a few days and the serviceman arrives. Hes clearly never seen this kind of oven. He calls Dacor and talks to their troubleshooting department. They decide the motherboard is bad and reorder. Well, its been 10 days. *crickets*. There is no sense of urgency... In fact nobody even seems to care that my $7500.00 oven doesnt work and the microwave literally cant even pop popcorn. I would expect the company to rush delivery of the part. If need be replace the whole oven and figure out what is wrong with the motherboard on your own time. What I didnt expect is for literally everyone involved in the process of choosing and buying the appliance to not be able to find a solution. I give my new oven 1 star out of 10, because it looks nice. Id rather have an oven that doesnt have a smart feature and actually works. FAIL Dacor.

I remodeled a kitchen in a high end house and so wanted nice appliances. I had KitchenAid (which Id had a lot of issues with) for about 16 years. (Since I built the house - the fridge was rebuilt 3 times.) While looking for which appliances to use we were at an open house and a chef was cooking and giving a talk on the Dacor ovens in it. So... I reviewed a lot, liked what I read, and chose Dacor. I love them, the cook quality, the features, all of it. BUT my double oven had issues from the start. An annoyance at first with the built in Android but I didnt complain a lot. Move forward 1.5 years and the Android tablet built into it would freeze and not restart without throwing a jumper on fuse box. I called Dacor and they gave me a number of options, disable the Android because of a known issue and get $500 back, or - return the oven for full credit and theyd pay to have it removed (1.5 years later... cmon thats pretty awesome), or - pay $500 and move to the newest higher end model with steam cooking. Wow, talk about stand by your product! Ive never seen this before with an appliance manufacturer/vendor. Certainly wasnt my experience with KitchenAid. Anyway Im an advocate even though I had a problem and thought they deserved credit here.

We purchased this range after remodeling our kitchen. We opted for the Dacor because of the deep oven that the other high end ovens did not have. I am an avid baker so this was a plus. After a year and half the oven stopped working, it was not getting hot. Thankfully is was still under warranty and it was repaired. The technician determined it was the oven control thermostat that was not working. Fast forward two years and again the same problem, along with the right front burner now also not working. And wouldnt you know it, the warranty is expired. Another technician came out again and stated to fixed the two problems it would be approx $250.00 just for labor and not including parts. CRAZY INSANE!!! If we would have known all the problems and we would have purchased either a Wolf, a Thermador or even a Monogram. How can so many issues and problems be happening with an range that is only 4 years old? Especially one that costs over $6000. It has to be a lemon or poorly manufactured. Ive contacted Dacor and was told they need to review my file to make a determination on what they want to do. REALLY, you dont need to be a rocket scientist to know there is a problem. Theres lemon laws for cars, why not appliances????

Dangerous condition! I purchased a Dacor 36 dual fuel range 5 years ago. I reported the issue to Dacor via email with no response from customer service. I believe the no response was an attempt by Dacor to distance themselves from their responsibility for this potentially dangerous condition. Specifics: When pre-heating the oven in convection/bake mode, if the oven door is opened before reaching the set pre-heat temperature, a ball of flame will explode up from the opened door. The ball of flame is basketball sized and has singed eyebrows and hair on several occasions. To reiterate - it is a ball of flame, not super-heated air that is the problem. As a result, after non-response from Dacor, we called a decor qualified repair technician who diagnosed the problem as a bad igniter. The igniter was replaced and the problem still exists. I fear that a small child may be severely burned by the engineering design fault.

I would never buy another Dacor product. The microwave totally crashed and now the oven will not heat. I have had contact in the past regarding repairs and they are outrageous. I plan to replace both items rather than paying unreasonable costs. Very unhappy.

Over ten years of using my Dacor oven, I have spent $1595 in repair bills to keep it going. It cost $1875 originally and I would have purchased a more reliable brand if I had known how much trouble the oven would cause me.

Add me to the Dacor hate list. The $4300 oven installed in 2000 is now a whopping $6400. My motherboard #2 is broken and the glass on the door cracked which to me is a safety issue. This is a two adult, no kid household so figure. We use the oven about 7 times a year. My Dacor rangetop and hydraulic exhaust have both required service as well.

Updated on 02/23/2021: Its been several weeks since I first posted. The only reply that Ive received was an email via this site that requested information from me on my claims. The info was provided the same day. A week has gone by since I provide the information and I have yet to hear back from Dacor. Not even a were looking into your issue. What I did receive was a notice from Samsung (who has acquired Dacor) telling me that one of my service tickets has been cancelled. I dutifully called the listed number to get more information... only to be told that the Samsung customer service rep could not help me and that I needed to call Dacor. Ive tried to approach this matter with humor up to this point but I am out of patience. Given the price I paid for these products, I expected a premium customer experience... the experience I have received has been abysmal.Original Review: I did not think that a customer experience could be this AWFUL or that a vendor could seem to care less than Dacor cares about resolving my issues. After 5 months, the exhaust downdraft that we purchased still does not work and Dacor either does not respond or - when I can get someone on the phone - I get any number of standard excuses (parts shortages, Covid, port backlogs are delaying deliveries, the integration with Samsung, etc, etc). I am also missing basic parts such as shelves(!) that should have been installed during the original installation. The retail partner (Specialty Appliance) does not seem to have anymore luck in getting answers.

I have owned a Dacor Convection microwave for a few years and is so far the best Ive ever owned. It works great every time, has great preset features and also has a great stainless steel look. Great Product.

Purchased a Dacor Epicure ER36DSCH/NG RANGE and oven in 2007. Sad story, it never worked properly since day 1. Initially a gas burner did not light, they came and repaired it. Subsequently the door lock failed in the lock position - had that repaired. The door lock failed the next year again, this time thanksgiving, ruined the dinner. They fixed it but the following year the lower burner element failed at Thanksgiving. All my relatives know not to purchase a Dacor product. Problem is I am stuck with this boat anchor. The oven door motor has failed 3 more times and thankfully the service man showed me how to change it. Today we tried to bake some apple pies and found the oven temperature set at 450 was only 350 (bought an oven thermometer). This explains why it always takes so long to bake things. A complete piece of **, never ever buy one.

It give the peace of mind, knowing that having a Dacor cooktop (RGC365) I have one less thing to worry about it. Food is always on time, and my wall oven is so simple to use and clean. Like I said one less thing to worry about it. I been a Dacor customer for over 12 years. There is no need to look any farther. My next kitchen will be a Dacor Set.

I purchased DACOR built in 30 separate side by side freezer & refrigerator on Jan. 18th 2019. After installation (Jan. 31st) a few days later the food and shelves in the freezer started getting a build up of ice. I called to have my freezer looked at and they gave me a service call of Feb. 7th the soonest a Dacor Rep could make it. The Dacor Rep determined that the freezer door was not sealing properly. The rep from Dacor adjusted the door and said the freezer should be fine. It was not. The ice continued build up on my food/shelves. I was instructed to call if I had any further problems. I made several calls starting on Feb. 9th to Dacor customer service, and, Dacor Service Rep. No one called me back. I left messages, I even text the service rep as he told me to do if I had any problems. I also sent pictures via text to him. No call back from anyone!It took me several days to get someone on the phone to find out what could be done with the freezer and why it was icing up. On Feb.13th I spoke to a customer service rep in the corporate office. He asked me to email him pictures of the inside of my freezer which I did. I never heard back from him. No call, no return email, they just don’t acknowledge any voicemail, or even emails. March 7th another customer service rep, she said a new door was being ordered to replace the one I have now, as they decided it was damaged during shipment. She also told me that her service rep recommended I push on the top corner of the freezer door each time I closed it and to keep defrosting the freezer. Why after paying this kind of money am I told to “defrost” my freezer?Fast forward to May and my ice maker stopped making ice… Since this purchase most of the food had freezer burn. I had to pushed on the door as Customer Service suggested as a solution while I wait for them to install a new door or fix the one on it.. I had to throw out about $600 worth of food. In the end I returned the Dacor refrigerator and freezer. The customer service from Dacor is beyond poor. I wished I had read other reviews on this company and their products before I made such a larger purchase. Please do your research before you spend money with Dacor.The company, Monarch Premium Appliances I purchased the Dacor appliances through exchanged them for me. I can’t say enough good things about Monarch and their employees. Both the company and my salesperson, ended up taking a loss in order to make the exchange! Dacor would not allow them to return the appliance. That is just unacceptable. Why should the company carrying their brand be made to take a loss??? Shame on Dacor for that!

Our refrigerator is 5 years old and has had a problem with icing up in the freezer area, resulting in a loud noise from the freezer fan. We originally called Dacor for service but they could not get to it for 2 weeks. An appliance repairman installed a new heater for the defroster. This only worked a short time and happened twice with a cost of over $1000. A couple of months ago, it happened again, and we were able to get a hold of ** at Dacor customer service. She knew exactly what was causing the problem. She ordered the parts and directed a factory-approved repairman to install over $800 in parts and we are confident the issue is resolved. Thank you, Dacor, for standing behind your products.

We remodeled, added a very upscale kitchen in 2003, and chose Dacor appliances, 36 inch dual fuel stove, 30 inch wall oven, microwave, and a 30 inch dishwasher, well over $25000 worth. NONE of the appliances has worked properly, but the dishwasher has taken the cake. I have lost count on how many times I was in contact with the customer service. The digital board went bad, the error msgs kept coming for years! The racks/baskets rusted after just a couple of years! After numerous encounters with anybody I could get a hold of they were finally replaced, but not the right racks because they do not fit, falls off the side every time I use this dishwasher. I cannot tell you how frustrating this has been! I was eventually told that I could not complain anymore because I was out of warranty and they would not respond anymore! I am stuck with this $3000+ dishwasher that I cannot afford to replace, because I would have to rebuild that area of counter cabs in the kitchen! The service has been horrible. This was the most costly mistake purchase I have ever made.

I bought a Dacor Epicure 48 range in 2003. It has never worked correctly. I read many other complaints on this same range. I had the burners replaced and I still have to light them with a match each time I turn them on. The oven temperatures were never correct. Nothing bakes properly even following their directions. It bakes very uneven. The hinges are sprung/broken (as the doors are too heavy for the lightweight hinge they use). I have had numerous service calls over the years and still not a good oven or repair. I too am very disappointed in the fact that this product is a lemon and they will not replace it.

Dacor 48 dual fuel range - Only 3 years ago, we purchased a Dacor range that is beautiful and worked great for 2 1/2 years. During the last six months, I had the led lights go out on some of my cooktop knobs and my oven has started not baking evenly, much as described in a previous post (half of your cookies can be burnt and the other half dough). A serviceman has been out twice and I have been made to feel that basically, I dont know how to use this oven or dont know how to cook. Funny that has only been in the last 6 months. I cooked great with the range for 2 1/2 years and have 20 years of cooking experience, but obviously, I dont know what Im talking about. To replace a led light bulb, I had to purchase a $300 control board part (that Dacor did discount) plus a $100 labor. It ended up being a $250 light bulb fix that has exploded to a potentially additional $600 problem. When taking off the range lid to replace the lights, I am now told that 3-4 burners have to be completely replaced and this again is my fault somehow because the metals fuse together and that is known by Dacor to happen, but my service tech said its because I dont clean my range well enough. This still makes no sense. And to fix the oven problem, it might be the control board? Lets throw my money at it and see? All guessing, the serviceman, Dacor, etc.! So now Im stuck with a parts bill of over $1,000 (Dacor did discount this to about $300) plus $200+ in labor, another guess. This just seems ridiculous to change a light bulb and guess at an oven fix for a 3-year old range that cost as much as a car! Im so irate over the whole issue! What a mistake Dacor was.

I was a bit anxious when I purchased my Dacor range because I really didn’t know how it would perform. A year later and I couldn’t be happier. I love my Dacor 30” range. It has been one of the best purchases ever.

We own 3 Dacor appliances, gas cooktop, microwave & built in oven. From the day of installation of wall oven there was a problem. Without going into detail suffice to say it was repaired 3 times within several months, under warranty. We were having issues with our microwave not working consistently, after several service visits, not under warranty, we now are told it will cost over $600 for the part. We are now looking for another brand of microwave instead of fixing the Dacor. On a side note the rings for our Dacor gas cooktop never come clean no matter how hard you try. The material used are definitely inferior. We have another property with all KitchenAid and have been happy with the performance. Our fridge & dishwasher are KitchenAid and I regret not getting the same brand for our other appliances. If I could give a minus star for Dacor I most certainly would do so.

From the beginning, August 1997, 17 years ago, I was not able to use my oven after self-cleaning. The problem was never resolved after countless service calls totaling over $1500. Aside from the cost, I was inconvenienced every time I cleaned my oven, as I was not able to use it until it was serviced, about a two week wait. I contacted Dacor early on and they reluctantly agreed to extend my warranty for a year. They did nothing beyond that, and my oven still shuts down after self-cleaning, which I hesitate to do at all, until it is beyond needing cleaning! The circuit board was replaced and recently the cooling fan was changed, but....no luck. Buying a new oven is not an alternative, as the oven performs well in every other way and I simply cannot afford one. I cannot believe a company of such status is not interested in satisfying its customers.

We purchased this unit 7 years ago, just a family of two with visiting grandchildren. Unit came, had a crooked door and a bent latch, which we had serviced and supposedly corrected. When self cleaning the latch still made grinding noises. Over a year ago the oven stopped working period. A December service call said needs a new latch, sensor and display -we are now in 4 figures($). Oven operates for month and a half. January 2019 Service call now new door latch, relay board and main wire harness 4 figures again double! Oven stops working yesterday (June). Service call today new latch, motherboard and something else and another 4 figure repair cost. Same repair parts same problem! Patience is a virtue, but repair costs are sinful! Next step, Boat Anchor! Problem from the beginning and still a problem now.

I called customer service to ask general directions on how to remove the top of my oven range. The person answering the phone (01/23/2017 at 4:25 PM) would not let me talk to anyone in service. I asked him why, and are you ready for this? He said we cant talk to customer service for our own security.. No kidding. The idiot went on to try and tell me it was for my protection! After arguing further, I asked him to again connect me with a technician. He puts me on hold and comes back and says The technician said to call a service provider - unbelievable. I will NEVER buy a DACOR product again! What morons think they can sustain a business with this approach to service!

Like many of you on this site, when we remodeled our kitchen in 2000, I researched and decided to shell out the extra money for the highly recommended and higher priced Dacor everything. We got a double oven, glass 30 cooktop and an exhaust fan. 12+ years later, I wish I had bought GE! My ovens have had so many problems I cant even count. Basically, the temperature doesnt hold correctly. I have used oven thermometers and my husbands fancy gauge to check temp. I had a whole transformer and control panel changed out in hopes that it would correct the problem, but it didnt. I think it has something to do with the self-cleaning. I think it gets so hot that it fries the controller. I never use the broiler so its not like I left the door open and wasnt supposed to. This afternoon I set the oven to preheat to 350. I set my little cakes inside that I was making with my grandson. About 5 minutes later, it smelled like something was burning so I checked the little cakes. They were already charring on top and then I noticed that the top element was fiery red, basically on broil! What the heck?! This is ridiculous! Im not going to spend another $500 for another repair! I am waiting to see what the repairman says.On another note, my stovetop cracked twice! The last time, Dacor was nice enough to sell one to me at cost and my husband was able to install it. It didnt match the old one and I was told by Dacor that they dont make them anymore and that is made by a third party supplier now. The old one had a textured finish and this one is just very shiny and scratches so easily! I hate it. We also had a retractable exhaust fan put in because the stovetop is in an island. Every time I turn it on, my basement smells like whatever is cooking. Now the buttons dont work anymore. That is unless I jab them so hard with a sharp object that it finally makes enough contact to work! This is another part that we got at cost that my husband had to crawl around and repair that still doesnt work.So, all three Dacor appliances we bought have turned out to be very disappointing purchases. Dacor should stand behind their products better, offer longer warranties or better yet, build better products! I would never recommend these products to anyone!

We spent close to 30K in Dacor appliances and have been paying for repairs almost yearly. Most recently last year around March 2015 we spent $1800.00 in repairs for the refrigerator. It is a long weekend and we planned a family BBQ and had to throw away all my marinated meats and salads. This is unacceptable. When you spend thousands of dollars in appliances you dont expect to have these types of problems. DO NOT BUY DACOR APPLIANCES. IT IS A RIPOFF.

My dishwasher - I used to totally rinse my dishes before putting them in to the dishwasher. No more, not necessary. Does a fantastic job. My refrigerator is amazing. Very roomy, love the individual crispers that keep my veggies perfect and my lunch meats and cheeses perfect. Also, love, love the bottom drawer freezer. Easy to access ice and frozen items. My range is amazing. I love to cook with gas and bake with electric. I bake a lot and this oven is a dream. The green clean feature is long overdue with ovens. Not harsh and cleans beautifully. Bottom line – I’m totally a Dacor fan.

We were incredibly disappointed, not only with the range but with the customer service from Dacor. We purchased this range in January 2016 and here we are in July with what is basically a pan holder sitting uselessly in our kitchen. Problems started immediately. The first time I used the oven, it locked with the cooking food inside. It turned out that the thermostats on both ovens were so out of whack that the oven temperature reached self-cleaning mode levels so the ovens locked with the food inside! We had both thermostats replaced twice and still had the same problem. Eventually, the thermostats were calibrated, but still within a range. In addition, the switch for the convection oven just stopped working. After 6 months of trying to deal with this problem, we will be returning the range and replacing it with a different brand. At no point did Dacor offer to exchange the range, they simply kept sending a repair person.

Dacor double oven range turns off by itself while baking - Disappointed in Dacor, especially today. Thanksgiving 2016: baking turkey. Sill baking turkey. I dont know when the oven decided to switch off this time, but I have an uncooked turkey and guests waiting. The oven has done this before, but because it was new I thought it was user error. Nope, the damn oven mysteriously turns off on its own. Incredibly irritated with Dacor. The range hood we also purchased is a joke. We remodeled our kitchen 1 year ago and wanted quality appliances. Bad move. Save your money, folks. Save your money.UPDATED ON 03/10/2017: Dacor sent a company out to fix the broken new oven. Oven still cannot hold its temperature (It takes FOREVER to heat then loses its heat while still showing a high temp). This time I have a recording on what happens when the oven automatically switches off. Disappointing when we spent nearly $10,000 in Dacor appliances for a kitchen remodel. DACOR, please have a rep contact me!!! Still waiting to hear back!!!

This posting is in response to my original post regarding the Drain Pan heater issue in our Dacor refrigerator. My refrigerator was repaired on 10/16/2012 at no charge to me. My refrigerator is out of warranty, but Dacor stepped up and repaired the issue. The customer service I received was second to none, and I would like to thank James ** for that. Great customer service instills confidence in your product! Thank you!

We purchased this oven/cooktop was installed in February 2020. I have been unhappy with the performance of the smaller oven from the beginning. It takes 20 minutes to pre-heat, a loud fan starts to run partway during the pre-heating process and then warm air starts to flow out the bottom. Plus, it is not either holding the correct temperature or not reaching it completely, nothing I cook in there is done in a appropriate amount of time. Baking a small potato takes an hour and a half at 375, brownies take almost twice the approximate baking time. My attempts to contact them have been less than satisfactory. I wrote for a second time over two weeks ago providing a copy of the invoice and have still heard nothing. I am quite disappointed with this product & company.

I bought this beautiful range and choose Dacor but when we used the Green Clean on it the enamel pealed off a spot on the bottom of the oven a 2x4 inch patch. Now Dacor say that this is cosmetic and will not honor their warranty. I have been calling them daily because they do not call me. Their service sucks.

We did a major remodel in 2006 and were talked into Dacor Appliances by the kitchen planner. Big Mistake! The first time we tried to do the wall oven self-cleaning, the circuit board blew out. Since it was just past warranty and no one near us in West Virginia would work on it, I found a board online for $200.00 and replaced it. It has never heated evenly and now it wont heat past 350 F and maintain temp. The Dacor range hood sounds like a jet plane and the variable speed switch wont reduce rate. The bulbs burned out and after buying two online for $30 each, I removed the decorative housing and use a more standard $10 bulb. The Dacor gas cooktop is OK except that EVERY time you turn on a burner, one or two of other igniters start clicking and wont stop until you find which one it is (not always the same) and turn it on and off. Please heed this and all the other warnings from the choir. DO NOT BUY DACOR! It is all very expensive junk! I only gave it 1 star because there was no way to rate Dacor a zero!

We purchased a Dacor Epicure dual fuel range when we built our house 7 years ago. It was the most expensive appliance we bought and we wish we hadnt. We have had no problems with the stove top, but the oven, specifically the broiler unit has been a consistent problem. We rarely use the broiler and use the oven perhaps 2 or 3 times a month. Yet, the igniter had to be replaced in March of 2008 and again, in June of 2010. In January of 2011, the broil gas valve was changed and now in September, the broiler is again not working. I cant see pouring any more money into this appliance and will sell as soon as I find a buyer willing to take a chance on it. We have been greatly disappointed in this product.

Arrived in good condition and so far works perfectly. Delivery was delayed by one day because of the incompetence of my local mail service. I bought this microwave, as others have described, to replace a 13 year old Dacor that had not really died but had lost the electronic screen. We put magic marker numbers on the display screen where the numbers had been 5 years ago and kept using all the functions. I decided to replace as, without the display screen, I could not do anything semi sophisticated with this microwave but its motor and microwave capacity was still going strong. This model fits perfectly into the previous 24/27 trim kit. Unfortunately our other trim kit is white to match our old microwave. Decor only has stainless steel now. And the new trim kit for this microwave is flat without the vent slats (plus costs over $300!). From the placement in our cabinet, I think the vented slats are really important to dissipate heat and am puzzled by the change in design by Dacor. The slats are a little tedious to clean but as a TV is above the microwave and an oven below I want the heat to have a better place to go. Ebay has the old trim kit in stainless steel but so far the expense seems excessive for just the outside piece. The internal support bracket for the new microwave is exactly the same as for the previous model so the only part of the trim kit needed for my microwave is the outside frame. This newer model works very similarly to the older version. I am delighted Dacor still makes this microwave to fit my space 13 to 15 years later.