Appliance Types

Appliance Brands

Article Categories

More Articles

Kenmore dryer not starting Repair help questions

[BACK]
Kenmore dryer not starting Repair help questions
Posted On: March 21, 2023

My Kenmore dryer started tripping the breaker on some settings and then just stopped working while we were testing it on low setting without tripping the breaker. The 240v outlet was replaced with a new one. The dryer thermal fuse was replaced.


The three terminals are more what's in question.


When touching the multimeter to the terminal 1 and 2, results in a reading of barely above zero.


When touching terminal 1 and 3, it results in 40v.


When touching terminal 2 and 3, it results in 120v.


Does this mean there's a problem with the terminals?


Is there still a problem with the outlet?


Is there a different issue I'm not seeing?


Thanks for your help.


Question from user Purdoopies at Appliances at reddit.com.


Answer:

If your Kenmore dryer is not starting, there are several possible causes. Here are some questions to ask yourself to help troubleshoot the issue:


  1. Is the dryer plugged in? It may seem obvious, but double-check that the dryer is properly plugged into an electrical outlet.


  2. Is the circuit breaker tripped? Check your home's circuit breaker to see if the breaker for the dryer has tripped. If it has, reset the breaker and try starting the dryer again.


  3. Is the door fully closed? The dryer will not start if the door is not fully closed. Make sure the door is securely closed and try starting the dryer again.


  4. Is the timer set correctly? Check that the timer is set to a cycle that will allow the dryer to start. Some dryer models have safety features that prevent the dryer from starting if the timer is not set correctly.


  5. Is the start switch or button working properly? Check that the start switch or button is working properly. You may need to replace the switch or button if it is faulty.


  6. Is the thermal fuse blown? A blown thermal fuse can prevent the dryer from starting. You can check the thermal fuse with a multimeter to see if it has continuity. If it does not, replace the thermal fuse.


If you are unable to identify the problem or are uncomfortable with attempting a repair, it is recommended to seek the help of a professional appliance repair technician.



[BACK]
Kenmore dryer not starting Repair help questions
Posted On: March 21, 2023

My Kenmore dryer started tripping the breaker on some settings and then just stopped working while we were testing it on low setting without tripping the breaker. The 240v outlet was replaced with a new one. The dryer thermal fuse was replaced.


The three terminals are more what's in question.


When touching the multimeter to the terminal 1 and 2, results in a reading of barely above zero.


When touching terminal 1 and 3, it results in 40v.


When touching terminal 2 and 3, it results in 120v.


Does this mean there's a problem with the terminals?


Is there still a problem with the outlet?


Is there a different issue I'm not seeing?


Thanks for your help.


Question from user Purdoopies at Appliances at reddit.com.


Answer:

If your Kenmore dryer is not starting, there are several possible causes. Here are some questions to ask yourself to help troubleshoot the issue:


  1. Is the dryer plugged in? It may seem obvious, but double-check that the dryer is properly plugged into an electrical outlet.


  2. Is the circuit breaker tripped? Check your home's circuit breaker to see if the breaker for the dryer has tripped. If it has, reset the breaker and try starting the dryer again.


  3. Is the door fully closed? The dryer will not start if the door is not fully closed. Make sure the door is securely closed and try starting the dryer again.


  4. Is the timer set correctly? Check that the timer is set to a cycle that will allow the dryer to start. Some dryer models have safety features that prevent the dryer from starting if the timer is not set correctly.


  5. Is the start switch or button working properly? Check that the start switch or button is working properly. You may need to replace the switch or button if it is faulty.


  6. Is the thermal fuse blown? A blown thermal fuse can prevent the dryer from starting. You can check the thermal fuse with a multimeter to see if it has continuity. If it does not, replace the thermal fuse.


If you are unable to identify the problem or are uncomfortable with attempting a repair, it is recommended to seek the help of a professional appliance repair technician.



[BACK]

Replace the compressor or get a new fridge? Replace the compressor or get a new fridge?

Posted On: April 27, 2023
Our LG french door refrigerator stopped cooling this past Sunday. The fridge section is about 55 degrees F and not sure on the freezer temp, but its not freezing. Model#: LMXS30776S. The frid...[More]


Dryer has a 240V plug, but we only have access to two 120V outlets Is there a safe solution? Dryer has a 240V plug, but we only have access to two 120V outlets Is there a safe solution?

Posted On: September 28, 2023
We have a 240V dryer, but only 120V plugs in our rental. Are converters safe? Can we safely resolve this on our own?Question from user organiclawnclippings at Appliances at reddit.com.Answer:The new G...[More]


Whirlpool Breaks Ground On New Wind Farm Project In West Texas Whirlpool Breaks Ground On New Wind Farm Project In West Texas

Posted On: March 26, 2022
On March 23, Whirlpool Corp. celebrated the groundbreaking of a 340 Megawatt wind farm in Callahan County, Texas. This Virtual Power Purchase Agreement is a collaboration with Clearway Energy Group an...[More]


Freestanding vs. Built-in Ovens Freestanding vs. Built-in Ovens

Posted On: December 17, 2020
When purchasing an oven, you may want to consider both freestanding and build in ovens to see which one will work best for your home. Freestanding ovens are considered to be an all in one cooker, w...[More]


How to select an inground pool heater How to select an inground pool heater

Posted On: December 27, 2021
If you own a pool, you know the best way to ensure a comfortable swim is a pool heater, especially if you live in a cooler climate. Pool heaters are available for all types of pools, above ground and ...[More]


How do I remove foul odors from my dishwasher? How do I remove foul odors from my dishwasher?

Posted On: July 31, 2023
To remove foul odors from your dishwasher, follow these steps: Clean the Filter: Start by removing the dishwasher's filter (located at the bottom of the dishwasher) and cleaning it thoroughly. ...[More]


Jura launches Z10 a new coffee machine for hot and cold brews Jura launches Z10 a new coffee machine for hot and cold brews

Posted On: January 11, 2022
The Z10 features a great deal of innovation, Jura says, including its exclusive Product Recognising Grinder (PRG), which is said to identify the chosen specialty and then adjust the fineness of the gr...[More]


Miele presents Pioneering GmbH Miele presents Pioneering GmbH

Posted On: January 30, 2023
With Pioneering GmbH, Hendrik Stegelmann (left) and Dr. Ina Nordsiek (right) will create a creative environment for internal start-ups to realise ideas more quickly. (Photo: Miele) Miele has founded i...[More]


Bold initiative by Samsung to make household appliances more sustainable in 2022 Bold initiative by Samsung to make household appliances more sustainable in 2022

Posted On: January 24, 2022
In a statement, Hyesoon Yang, Executive Vice President and Head of Customer Experience of the Digital Appliances Business, said the company was developing “Collaborations to combat microplastic ...[More]


The Re program of Samsung Brazil The Re program of Samsung Brazil

Posted On: February 1, 2023
Samsung follows an environmental strategy consisting of comprehensive global efforts to tackle climate change. Within Brazil that strategy resulted in the Re+ program, a recycling, awareness and educa...[More]


Visa MasterCard

Site Secured By The Website Guardian
TOP