SABER's spirit of innovation and entrepreneurship springs from a heritage of excellence from their parent company. Founded in 1885, The W.C. Bradley Co. is a family-held business that has built a well-deserved reputation for quality, value and integrity.

Gas Grill Troubleshooting

Defective Igniter Battery 
Most gas grills, including the Saber grill’s igniter module, consist of a battery. The battery is the power source for the igniter. A healthy and perfect power source ensures proper running of it. Now, if there is an issue with the battery, your Saber grill won’t ignite. The probable causes of this problem are the following: 
Incorrect battery installation 
The battery’s protective plastic remains in it 
Damaged battery 
Solution: 
The battery system igniter module depends significantly on the battery for ignition. The defective battery is responsible for the igniter not working. The solutions to this trouble are the following: 
Ensure correct installation of artillery within the module. Take help from the technician to install it if necessary 
Often we forget to remove the protective plastic from our brand new grill. Make sure that you properly remove it. 
Replace the damaged or defective Saber grill igniter battery 

Clogged Burners 
The ignitor electrode sparks near the Saber gas grill burner. Thus, if the burner itself is dirty or has a clog, it may hinder the igniter’s easy working process. The following factors contribute to becoming a dirty burner. The factors are: 
Dirt, dust, or foreign object build up within the burner 
Leftover oil and grease in the burner tube 
Dirty or damaged burners 
Grime and insects clog the burners tube and ports 
Solution: 
The clogged burner is one of the main culprits which hinder the Saber Grill’s igniting process. Ensuring the burners good condition is necessary. Thus, the above problem’s solutions are the following: 
Inspect your grill’s burner regularly 
Use a soft bristle broom or cloth to remove the burner’s inside dirt or other foreign objects 
After finishing the cooking, use a delicate thing to clean the oil and grease leftover in the burner tube 
Replace the damaged burner 
Remove and clean the burner’s tube and ports 

Faulty Igniter Electrode 
The electrode is responsible for gas ignition and burner spark. If the electrode is not okay, the gas grill will fail to ignite. The faulty electrode is one of the leading causes of the igniter’s lighting problem. Various causes can lead to a defective electrode, including: 
Rust or dirt build-up in the electrode 
Electrode fails to get adequate gas supply 
Flame tamer and cooking grates in it 
The improper placing of igniter mounting screw 
Solution: 
If your Saber Grill igniter stops working because of a faulty electrode, the keys to solving it are the following: 
Use a toothpick, bleach-free cleaner, or toothbrush to remove the rust build-up from an electrode 
Contact an expert repair specialist to replace the faulty or damaged one 
Ensure adequate gas supply in igniter electrode 
Inspect whether the electrode is okay or not by pulling the mounting screw in it 

Defective Ignition Module 
Proper functioning of the ignition module is essential for the smooth working of the Saber gas grill’s igniter. The igniter electrode receives current from the module and helps in lighting. However, due to the defective module, the igniter fails to produce light in the grill. The causes leading to these issues are: 
Igniter button press for too long or too frequently 
Dead battery 
Module fails to deliver the clicking sound 
Solution: 
Replacing your defective ignition module is necessary to ensure the tip-top shape of your Saber gas grill. If the faulty module is the culprit for which the igniter is not working, you should follow the solutions below: 
Contact a technician and replace the defective module 
At first, check the igniter battery and then press the button 
Replace the damaged or dead battery 
Ensure the module is producing a clicking sound 

Worn Out Spark Generator 
Spark generator in Saber gas grill comes in piezo or battery form. The worn-out spark generator in your grill may hinder the igniters working condition. The causes that create this difficulty are the following: 
It’s not producing the hard snap or clicking sound 
The spark generator is not in good shape 
Solution: 
Whether the spark generator is worn out or adequately working or not depends on its clicking sound. The ways to get rid of this issue are the following: 
Make sure the generator is producing a hard snap or clicking sound 
Ensure the generator’s good shape 
Unscrew the generator’s cap and check the battery 

Improper Igniter Wire Connections 
Improper igniter wire connection is another component that keeps the igniter away from working. If you see your igniter is not lighting, check the wires first. Maybe the loose or improper connections between the cables make obstacles in the igniter’s proper functioning. Causes of this problem are: 
Loose connection 
Destroyed wire 
Solution: 
To solve this problem at first, you should check whether the igniter wires are appropriately connected or not. The other solutions are: 
Disconnect and reconnect the wire to ensure proper connection 
Ensure there are no loose connections in the wires 
Replace the destroyed wire 

Faulty Connection Between Propane Tank and Gas Grill 
If your igniter stops working, you can make a quick look at the connection between the propane tank and the gas grill. This factor is another culprit that creates the igniter lighting problem. Improper coupling nut connection can cause this issue. 
Solution: 
Fortunately, the solution to this problem is easy. Properly connects the propane tank’s cylinder valve’s coupling nut to the gas grill, and the igniter will start working. To adjust the coupling nut, you don’t need any tools. Instead, use the hand to adapt it and prevents the threads from stripping. 

SOURCE: fireplacehubs.com