We’ve settled on three probable reasons that a refrigerator is always running. We’ll walk through each one of these reasons in this section. Of course, there may be other potential reasons, but in our experience, these are the most common ones that people run into.

If your refrigerator runs all the time it could be dirty condenser coils.
If you’ve had your refrigerator for a few years there’s been some time for dust and dirt to build up. Most of us do a great job of keeping the face of our appliance looking shiny and new, but we often forget about the back of these machines — only cleaning them once in a while if at all.
Over time, what happens over time at the back of our refrigerators is a steady build-up of dirt and grime from the grease in the kitchen. This often takes place around the condenser coils and that can stop them from doing their job properly leading to your refrigerator running longer than it should. You may notice this even more in warmer months if you have your refrigerator in an area that receives plenty of sunshine without an air conditioner to cool the area down.

When your refrigerator runs constantly you may have a faulty defrost heater.
If you’ve pulled out your refrigerator to have a look at what’s going on in the back and you don’t see a lot of dirt around the condenser coils, it’s time to consider other possibilities. Another possibility that may not seem as obvious is the defrost heater on your refrigerator.
When your refrigerator is always running the defrost heater on your appliance, it may have stopped doing its job of melting ice that can condense around the wrong areas of your fridge, such as the evaporator coils, which can cause it to run all of the time. It’s an issue that can cause serious mechanical failure if not dealt with quickly and effectively.

If your refrigerator keeps running it might be your defrost thermostat.
Many things are going on in the background that helps your refrigerator run and keep your food cool and fresh. Most of the time we have no need and no desire to understand how it all works — we know that it does and we’re happy with that. We’re at the point though when things have gone wrong. Another one of these potential issues is a malfunctioning defrost thermostat.
The thermostat helps to measure the temperature of the coils. When it notices that the coils are too cold it sends a signal to the defrost heater to heat up and warm the coils. If the thermostat isn’t doing its job, ice particles will build upon the coils and this will cause the fridge to run constantly as it doesn’t get the signal that the fridge is at the right temperature.

Fix a dirty condenser coil so that your fridge doesn’t run constantly.
If dirty condenser coils are why your refrigerator is running all of the time it’s actually easy to fix. First, you may want to unplug your refrigerator before beginning any work for safety reasons. Then you can take a vacuum and run it over the coils. Next, it might be necessary to use a light, damp cloth to clean any dirt that tends to cling. After that, you can plug the fridge back in and you should be as good as new.

Repair a faulty defrost heater to stop your refrigerator from running.
When your defrost heater stops working, frost will build on your refrigerator coils quickly, leading to a refrigerator that runs all of the time. First, you have to locate the heater and its location may be a bit different depending on the brand of your refrigerator whether it’s a Samsung, LG, Whirlpool, Kenmore, or some other popular brand. It’s best to refer to the manufacturer’s website for guidance.
Once you’ve located it and you can identify it as the problem you can replace it yourself. First, you’ll need to remove the cover that protects the coils from damage, and then you’ll need to unplug the wiring. At that point, you’ll be able to see the coil — that will need to be removed as well before you can access the defrost heater. Next, you’ll need to unplug the old defrost heater before you can install the new one. Then follow the steps in reverse and your refrigerator should be back to normal.

SOURCE: fixappliances.ca

We’ve settled on three probable reasons that a refrigerator is always running. We’ll walk through each one of these reasons in this section. Of course, there may be other potential reasons, but in our experience, these are the most common ones that people run into.

If your refrigerator runs all the time it could be dirty condenser coils.
If you’ve had your refrigerator for a few years there’s been some time for dust and dirt to build up. Most of us do a great job of keeping the face of our appliance looking shiny and new, but we often forget about the back of these machines — only cleaning them once in a while if at all.
Over time, what happens over time at the back of our refrigerators is a steady build-up of dirt and grime from the grease in the kitchen. This often takes place around the condenser coils and that can stop them from doing their job properly leading to your refrigerator running longer than it should. You may notice this even more in warmer months if you have your refrigerator in an area that receives plenty of sunshine without an air conditioner to cool the area down.

When your refrigerator runs constantly you may have a faulty defrost heater.
If you’ve pulled out your refrigerator to have a look at what’s going on in the back and you don’t see a lot of dirt around the condenser coils, it’s time to consider other possibilities. Another possibility that may not seem as obvious is the defrost heater on your refrigerator.
When your refrigerator is always running the defrost heater on your appliance, it may have stopped doing its job of melting ice that can condense around the wrong areas of your fridge, such as the evaporator coils, which can cause it to run all of the time. It’s an issue that can cause serious mechanical failure if not dealt with quickly and effectively.

If your refrigerator keeps running it might be your defrost thermostat.
Many things are going on in the background that helps your refrigerator run and keep your food cool and fresh. Most of the time we have no need and no desire to understand how it all works — we know that it does and we’re happy with that. We’re at the point though when things have gone wrong. Another one of these potential issues is a malfunctioning defrost thermostat.
The thermostat helps to measure the temperature of the coils. When it notices that the coils are too cold it sends a signal to the defrost heater to heat up and warm the coils. If the thermostat isn’t doing its job, ice particles will build upon the coils and this will cause the fridge to run constantly as it doesn’t get the signal that the fridge is at the right temperature.

Fix a dirty condenser coil so that your fridge doesn’t run constantly.
If dirty condenser coils are why your refrigerator is running all of the time it’s actually easy to fix. First, you may want to unplug your refrigerator before beginning any work for safety reasons. Then you can take a vacuum and run it over the coils. Next, it might be necessary to use a light, damp cloth to clean any dirt that tends to cling. After that, you can plug the fridge back in and you should be as good as new.

Repair a faulty defrost heater to stop your refrigerator from running.
When your defrost heater stops working, frost will build on your refrigerator coils quickly, leading to a refrigerator that runs all of the time. First, you have to locate the heater and its location may be a bit different depending on the brand of your refrigerator whether it’s a Samsung, LG, Whirlpool, Kenmore, or some other popular brand. It’s best to refer to the manufacturer’s website for guidance.
Once you’ve located it and you can identify it as the problem you can replace it yourself. First, you’ll need to remove the cover that protects the coils from damage, and then you’ll need to unplug the wiring. At that point, you’ll be able to see the coil — that will need to be removed as well before you can access the defrost heater. Next, you’ll need to unplug the old defrost heater before you can install the new one. Then follow the steps in reverse and your refrigerator should be back to normal.

SOURCE: fixappliances.ca