In business since 1952, Admiral Craft Equipment Corp. is a leading manufacturer of equipment, small wares and supplies to the commercial foodservice industry. Offering in excess of 2,000 products, their mission is to provide quality products at a competitive price, while maintaining superior customer service, prompt shipment and an exceptional fill rate. Admiral Craft's product line is continually evolving and now boasts the widest range of commercial foodservice products in the industry. With offices and 12 strategically placed warehouses throughout the country, Admiral Craft is able to provide quick and efficient shipment to customers, no matter their location.

Range Repair

For the home, kitchen and beyond, Admiral Craft manufactures appliances that homeowners have come to trust. Even a trustworthy appliance requires occasional maintenance or repair, however. If you’re in need of Admiral Craft appliance repair from experienced professionals, your local Appliance Helper can help.

Spark Module 
The spark modules provides power to each surface burner spark electrode. If the burner is produces a weak spark, or if the burner sparks intermittently, the spark module might be defective. Before replacing the spark module, first check the spark electrode and the spark wire. If the spark electrode and spark wire are not at fault, the spark module is likely defective. If the spark module is defective, replace it. 

Spark Ignition Switch 
When the burner is turned on, the spark ignition switch sends voltage to the spark module to produce a spark. If the spark ignition switch is defective, it won't send voltage to the spark module, and the burner won't be able to produce a spark. If your range's burner isn't sparking, check to see if the other burners are sparking properly. If the other burners are sparking properly, the spark ignition switch is likely defective. 

Spark Ignition Switch and Harness 
When the burner is turned on, the spark ignition switch sends voltage to the spark module to produce a spark. If the spark ignition switch is defective, it won't send voltage to the spark module, and the burner won't be able to produce a spark. If your range's burner isn't sparking, check to see if the other burners are sparking properly. If the other burners are sparking properly, the spark ignition switch is likely defective. If the spark ignition switch is not sold separately, you will have to purchase the switch and harness assembly. 

Spark Electrode 
The spark electrode sends a spark to ignite the gas in the burner assembly. If the spark electrode is defective or worn out, it might not produce a spark, or the spark might be too weak to ignite the gas. As a result, the spark electrode will make a clicking sound when the burner is turned on, but the burner won't light. If the spark electrode is defective, replace it.

Refrigerator Repair

For the home, kitchen and beyond, Admiral Craft manufactures appliances that homeowners have come to trust. Even a trustworthy appliance requires occasional maintenance or repair, however. If you’re in need of Admiral Craft appliance repair from experienced professionals, your local Appliance Helper can help.

Compressor not running 
• Blown fuse or circuit breaker tripped. Replace fuse or reset circuit breaker  
• Unplugged power cord. Plug in power cord   
• Thermostat set too high. Set thermostat to lower temperature.   
• Cabinet in defrost cycle. Wait for defrost cycle to finish. 

Condenser runs for long periods of time  
• Excessive amount of warm products placed in cabinet. Allow adequate time for product to cool down.  
• Prolonged door opening or door left open. Ensure doors are closed. Avoid leaving the door open for long periods of time  
• Door gasket(s) not creating a proper seal. Ensure gasket is installed correctly and that it is clean. Replace gasket if necessary.   
• Dirty condenser coil. Clean the condenser coil.   
• Evaporator coil iced over. Unplug unit and allow coil to defrost. Ensure that the thermostat is not set to cold. Ensure that the door gasket is creating a proper seal. 

Cabinet temperature is too warm  
• Thermostat set too warm. Set thermostat to lower temperature.    
• Blocked air flow. Re-arrange products to allow proper air flow. Make sure there is at least four inches of clearance from evaporator.      
• Excessive amount of warm products placed in the cabinet. Allow adequate time for products to cool down.  
• Blown fuse or circuit breaker tripped. Replace fuse or reset circuit breaker.    
• Dirty condenser coil. Clean the condenser coil.    
• Prolonged door open or door left open. Ensure doors are closed. Avoid leaving the door open for long periods of time.    
• Evaporator coil iced over. Unplug unit and allow coil to defrost. Ensure that the thermostat is not set to cold. Ensure that the door gasket is creating a proper seal. 

Cabinet is noisy 
• Loose parts. Locate and tighten loose parts.   
• Tubing Vibration. Ensure tubing is free from contact with other tubing or components.