If you're looking for help fixing your Forte Range, look no further! Our comprehensive Forte Range error code guide will explain common issues, provide tips, and show you how to read your model's error codes.

Problem: Nothing works. 
Reason: Oven is not connected to the electrical power. 
Solution: Have oven connected to a properly sized electrical power supply by a qualified electrician. 

Problem: Nothing works. 
Reason: Power supply is not energized. 
Solution: Have an electrician check the power supply, including the house circuit breaker, wiring and fuses. 

Problem: Top burners do not light or do not burn evenly. 
Reason: Plug on range is not completely inserted in the electrical outlet. 
Solution: Make sure the unit is properly connected to the power supply. 

Problem: Top burners do not light or do not burn evenly. 
Reason: Burner holes on the side of the burner may be clogged. 
Solution: Remove the burner heads and clean them.  Check the electrode area for burned-on food or grease. 

Problem: Burner flames very large and yellow. 
Reason: Burner bezel ports are clogged. 
Solution: Clean burner bezel ring ports with straightened paper clip, needle, or wire. 

Problem: Burner flames very large and yellow. 
Reason: Burner ports or burner caps are not positioned properly. 
Solution: Remove and carefully re-install burner bezel and caps. 

Problem: Burner flames very large and yellow. 
Reason: Cooktop is being operated with the wrong type of gas. 
Solution: Ensure that the type of cooktop matches the natural gas supply. 

Problem: Burner flames very large and yellow. 
Reason: Regulator is not installed, is faulty, or is set for the wrong type of gas. 
Solution: Check installation, replace regulator, or set regulator for proper gas. 

Problem: Sparking but no flame ignition. 
Reason: Gas shut-off valve is in the ‘OFF’ position. 
Solution: Turn shut-off valve to the ‘ON’ position. 

Problem: Igniters spark continuously after flame ignition. 
Reason: Power supply polarity is reversed. 
Solution: Have polarity corrected.  

Problem: Igniters spark continuously after flame ignition. 
Reason: Igniters are wet or dirty. 
Solution: Dry or clean igniters. 

Problem: Burner flame goes out at low setting. 
Reason: Low gas supply pressure. 
Solution: Contact gas company. 

Problem: Burner flame goes out at low setting. 
Reason: Air intake holes around knobs are obstructed. 
Solution: Remove obstruction. 

Problem: Oven will not heat. 
Reason: Oven settings are not corrected. 
Solution: Follow mode selection and clock settings as specified in Oven Operation section of the manual. 

Problem: Foods over-cooked or under-cooked. 
Reason: Incorrect cooking time or temperature. 
Solution: Adjust time, temperature, or rack position. 

Problem: ‘Cracking’ or ‘Popping’ sound. 
Reason: This is the sound of metal heating and cooling. 
Solution: This is normal.

Related Error Code Pages:
Forte Dishwasher Error Codes, Forte Microwave Error Codes, Forte Range Error Codes, Forte Refrigerator Error Codes,

Related Troubleshooting Pages:
Forte Dishwasher Troubleshooting, Forte Microwave Troubleshooting, Forte Range Troubleshooting, Forte Refrigerator Troubleshooting,

Related Repair Pages:
Forte Dishwasher Repairs, Forte Microwave Repairs, Forte Range Repairs, Forte Refrigerator Repairs,

Related Parts Pages:
Forte Dishwasher Parts, Forte Microwave Parts, Forte Range Parts, Forte Refrigerator Parts,

Related Price Pages:
Forte Dishwasher Prices, Forte Microwave Prices, Forte Range Prices, Forte Refrigerator Prices,

Related Pages:
range for sale near me, high efficiency range, range fix near me, house oven repair, range service call,