Si está buscando ayuda para arreglar su Range Forte, ¡no busque más! Nuestra guía completa de códigos de error del Range Forte explicará problemas comunes, brindará consejos y le mostrará cómo leer los códigos de error de su modelo.

Problem: Nothing works. 
Reason: Oven is not connected to the electrical power. 
Solution: Have oven connected to a properly sized electrical power supply by a qualified electrician. 

Problem: Nothing works. 
Reason: Power supply is not energized. 
Solution: Have an electrician check the power supply, including the house circuit breaker, wiring and fuses. 

Problem: Top burners do not light or do not burn evenly. 
Reason: Plug on range is not completely inserted in the electrical outlet. 
Solution: Make sure the unit is properly connected to the power supply. 

Problem: Top burners do not light or do not burn evenly. 
Reason: Burner holes on the side of the burner may be clogged. 
Solution: Remove the burner heads and clean them.  Check the electrode area for burned-on food or grease. 

Problem: Burner flames very large and yellow. 
Reason: Burner bezel ports are clogged. 
Solution: Clean burner bezel ring ports with straightened paper clip, needle, or wire. 

Problem: Burner flames very large and yellow. 
Reason: Burner ports or burner caps are not positioned properly. 
Solution: Remove and carefully re-install burner bezel and caps. 

Problem: Burner flames very large and yellow. 
Reason: Cooktop is being operated with the wrong type of gas. 
Solution: Ensure that the type of cooktop matches the natural gas supply. 

Problem: Burner flames very large and yellow. 
Reason: Regulator is not installed, is faulty, or is set for the wrong type of gas. 
Solution: Check installation, replace regulator, or set regulator for proper gas. 

Problem: Sparking but no flame ignition. 
Reason: Gas shut-off valve is in the ‘OFF’ position. 
Solution: Turn shut-off valve to the ‘ON’ position. 

Problem: Igniters spark continuously after flame ignition. 
Reason: Power supply polarity is reversed. 
Solution: Have polarity corrected.  

Problem: Igniters spark continuously after flame ignition. 
Reason: Igniters are wet or dirty. 
Solution: Dry or clean igniters. 

Problem: Burner flame goes out at low setting. 
Reason: Low gas supply pressure. 
Solution: Contact gas company. 

Problem: Burner flame goes out at low setting. 
Reason: Air intake holes around knobs are obstructed. 
Solution: Remove obstruction. 

Problem: Oven will not heat. 
Reason: Oven settings are not corrected. 
Solution: Follow mode selection and clock settings as specified in Oven Operation section of the manual. 

Problem: Foods over-cooked or under-cooked. 
Reason: Incorrect cooking time or temperature. 
Solution: Adjust time, temperature, or rack position. 

Problem: â€˜Cracking’ or ‘Popping’ sound. 
Reason: This is the sound of metal heating and cooling. 
Solution: This is normal.

Páginas de códigos de error relacionados:
Forte Lavaplatos Códigos de error, Forte Microonda Códigos de error, Forte Distancia Códigos de error, Forte Refrigerador Códigos de error,

Páginas de resolución de problemas relacionadas:
Forte Lavaplatos Solución de problemas, Forte Microonda Solución de problemas, Forte Distancia Solución de problemas, Forte Refrigerador Solución de problemas,

Páginas de reparación relacionadas:
Forte Lavaplatos Refacción, Forte Microonda Refacción, Forte Distancia Refacción, Forte Refrigerador Refacción,

Páginas de piezas relacionadas:
Forte Lavaplatos Partes, Forte Microonda Partes, Forte Distancia Partes, Forte Refrigerador Partes,

Páginas de precios relacionadas:
Forte Lavaplatos Precios, Forte Microonda Precios, Forte Distancia Precios, Forte Refrigerador Precios,