If you're looking for help fixing your Fulgor Milano Refrigerator, look no further! Our comprehensive Fulgor Milano Refrigerator repair guide will explain common issues, provide tips, and maybe show you how to repair your appliance.

For the home, kitchen and beyond, Fulgor Milano manufactures appliances that homeowners have come to trust. Even a trustworthy appliance requires occasional maintenance or repair, however. If you’re in need of Fulgor Milano appliance repair from experienced professionals, your local Appliance Helper can help.

Condenser Coils are Dirty 
The condenser coils are usually located under the refrigerator. They dissipate heat as refrigerant passes through them. If the condenser coils are dirty, they won’t dissipate the heat effectively. As debris builds up on the coils, the refrigerator becomes less efficient, causing the refrigerator to work harder to cool down. If the coils are significantly dirty, the refrigerator will not be able to maintain the proper temperature. Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. 

Condenser Fan Motor 
The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly. To determine if the fan motor is defective, first check the fan blade for obstructions. Next, try turning the fan motor blade by hand. If the blade does not spin freely, replace the condenser fan motor. If no obstructions are present and the fan blade spins freely, use a multimeter to test the fan motor for continuity. If the condenser fan motor does not have continuity, replace it. 

Evaporator Fan Motor 
The evaporator fan motor draws air over the evaporator (cooling) coils and circulates it throughout the refrigerator and freezer compartments. Some refrigerators have more than one evaporator fan motor. On refrigerators with only one evaporator, the evaporator is located in the freezer compartment. If the evaporator fan is not working, it will not circulate the cold air to the refrigerator compartment. If this occurs, the freezer may still get cold, while the refrigerator will not get cold. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. If the fan blade does not turn freely, replace the fan motor. Additionally, if the motor is unusually noisy, replace it. Finally, if the motor does not run at all, use a multimeter to test the motor windings for continuity. If the windings do not have continuity, replace the evaporator fan motor. 

Start Relay 
The start relay works in conjunction with the start winding to start the compressor. If the start relay is defective, the compressor may sometimes fail to run or may not run at all. As a result, the refrigerator will not be cold enough. To determine if the start relay is defective, use a multimeter to test it for continuity between the run and start terminal sockets. If the start relay does not have continuity between the run and start terminal sockets, replace it. In addition, if the start relay has a burnt odor, replace it. 

Temperature Control Thermostat 
The temperature control thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature control thermostat is not working properly, it may prevent the refrigerant system from running. To determine if the thermostat is defective, rotate the thermostat from the lowest setting to the highest setting and listen for a click. If the thermostat clicks, it is not likely defective. If the thermostat does not click, use a multimeter to test the thermostat for continuity. If the temperature control thermostat does not have continuity at any setting, replace it. 

Start Capacitor 
The start capacitor provides a boost of power to the compressor during start-up. If the start capacitor isn’t working, the compressor may not start. As a result, the refrigerator will not cool. To determine if the start capacitor is defective, test it with a multimeter. If the start capacitor is defective, replace it. 

Temperature Control Board 
The temperature control board provides voltage to the compressor and fan motors. If the temperature control board is defective, it will stop sending voltage to the cooling system. However, this is not a common occurrence. Control boards are often misdiagnosed—before replacing the control board, first test all of the more commonly defective components. If none of the other components are defective, consider replacing the temperature control board.

Related Error Code Pages:
Fulgor Milano Dishwasher Error Codes, Fulgor Milano Microwave Error Codes, Fulgor Milano Range Error Codes, Fulgor Milano Refrigerator Error Codes,

Related Troubleshooting Pages:
Fulgor Milano Dishwasher Troubleshooting, Fulgor Milano Microwave Troubleshooting, Fulgor Milano Range Troubleshooting, Fulgor Milano Refrigerator Troubleshooting,

Related Repair Pages:
Fulgor Milano Dishwasher Repairs, Fulgor Milano Microwave Repairs, Fulgor Milano Range Repairs, Fulgor Milano Refrigerator Repairs,

Related Parts Pages:
Fulgor Milano Dishwasher Parts, Fulgor Milano Microwave Parts, Fulgor Milano Range Parts, Fulgor Milano Refrigerator Parts,

Related Price Pages:
Fulgor Milano Dishwasher Prices, Fulgor Milano Microwave Prices, Fulgor Milano Range Prices, Fulgor Milano Refrigerator Prices,

Related Pages:
home refrigerator service, refrigerator installation near me, nearby refrigerator repair, refrigerator fix near me, refrigerator unit maintenance,