Name: Gaggenau Appliance Error Codes
Brand: Gaggenau
SKU: N/A
Price: 1499.99 USD
Availability: InStock
Rating: 4.5 (17 reviews)

Appliance Types

Appliance Brands

Article Categories

Gaggenau Appliance Error Codes

The modern, bespoke kitchen design demands built in appliances that are made to work together. Stainless steel fridges integrating perfectly with large wine coolers. Ovens aligned with built in coffee machines, hobs seamlessly blending into Teppan Yaki. The choice of luxury kitchen appliances is key to making the space work.

Dishwasher Error Codes

CODE: F1
PROBLEM: Flood switch has been activated.

CODE: F2
PROBLEM: Motor problem.

CODE: F3
PROBLEM: Temperature sensor failed.

CODE: F4
PROBLEM: Faulty temperature sensor element.

CODE: F9
PROBLEM: Electronics malfunction.

CODE: U1
PROBLEM: Fill fault.

CODE: E:01 to E:30
PROBLEM: Technical fault.

CODE: E22
PROBLEM: Filters 1Z are soiled or blocked.

CODE: E24
PROBLEM: Waste water hoses blocked or kinked. Siphon connection still sealed. Cover on the waste water pump loose.

CODE: E25
PROBLEM: Waste water pump blocked. Cover on the waste waster pump is not locked in position.

CODE: E27
PROBLEM: Main voltage too low.

Range Error Codes

CODE: E005
PROBLEM: Error in communication between electronic modules

CODE: E305
PROBLEM: Error in communication between electronic modules

CODE: E010
PROBLEM: Electronic data error.

CODE: E014
PROBLEM: Electronic data error.

CODE: E119
PROBLEM: Electronic data error.

CODE: E120
PROBLEM: Electronic data error.

CODE: E310
PROBLEM: Electronic data error.

CODE: E314
PROBLEM: Electronic data error.

CODE: E701
PROBLEM: Electronic data error.

CODE: E011
PROBLEM: A control button was presses too long.

CODE: E101
PROBLEM: Temperature sensor overload.

CODE: E104
PROBLEM: Temperature sensor overload.

CODE: E115
PROBLEM: Oven temperature is too high.

CODE: E318
PROBLEM: Cooling fan failure.

CODE: E702
PROBLEM: Data error in lift door electronics.

CODE: E704
PROBLEM: Data error in lift door electronics.

CODE: E705
PROBLEM: Data error in lift door electronics.

CODE: E706
PROBLEM: Data error in lift door electronics.

CODE: E703
PROBLEM: Door contact not working.

CODE: E711
PROBLEM: A lift door button was pressed too long. A lift door button is stuck. The front glass is not seated properly.

CODE: E300
PROBLEM: Incorrect wiring at first power up.

CODE: E003, E303, E115, E215
PROBLEM: The appliance is too hot.

Refrigerator Error Codes

There are no error codes at this time for this product.

Gaggenau Refrigerator not cooling
The condenser coils are usually located under the refrigerator. They dissipate heat as refrigerant passes through them. If the condenser coils are dirty, they won’t dissipate the heat effectively. As debris builds up on the coils, the refrigerator becomes less efficient, causing the refrigerator to work harder to cool down. If the coils are significantly dirty, the refrigerator will not be able to maintain the proper temperature. Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them.

Gaggenau Refrigerator water dispenser not working
To determine if the water supply tube is frozen, disconnect the tube at the bottom of the door and blow air through it. If air does not pass through, this indicates that the water supply tube is frozen. If the water supply tube is frozen, thaw it out. In addition, ensure that the freezer is kept at the proper temperature. The freezer temperature should be kept from 0-10 degrees Fahrenheit. If the freezer is too cold, the water line may freeze.

Gaggenau Refrigerator ice maker not working
If the freezer temperature is above 10 degrees Fahrenheit (-12C), the ice maker will not produce ice cubes efficiently. The freezer temperature should be set between 0 and 5 degrees Fahrenheit (-18 to -15C) for the ice maker to work properly. If the freezer temperature is too high, ensure that the condenser coils are clear of debris and the condenser fan is working properly. In addition, check to see if frost has accumulated on the evaporator coils. If the evaporator coils are frosted over, part of the defrost system has likely failed.

Gaggenau Refrigerator ice dispenser not working
The dispenser control board governs most of the functions of the dispenser system. If the control board is faulty, it may stop supplying power to the entire dispenser system. If only one dispenser part is not working, test each of the dispenser components before testing the control board. It is more likely that a single part has failed. If the entire dispenser system is not working, the control board is more likely to be at fault.

Gaggenau Refrigerator not defrosting
The defrost control board determines how often to run the defrost cycle. If the board fails, the refrigerator will not go into the defrost cycle. Before replacing the defrost control board, first test the defrost heater and defrost thermostat. If the defrost heater and defrost thermostat are working properly, the defrost control board is likely defective.

Gaggenau Refrigerator is noisy or loud
If the refrigerator is noisy or loud, especially when one of the doors are opened, either the evaporator or condenser fan blade may be at fault. First, check out the evaporator fan blade in the freezer behind the back panel. Try turning it by hand. If the fan blade does not turn freely, check to see if the blade is rubbing against something or if something is caught in the blade. Additionally, check the condenser fan blade in the back underside of the refrigerator to determine if it has any obstructions.

Gaggenau Refrigerator defrost drain clogged
The defrost drain might be clogged or frozen. If the defrost drain is frozen, the water will overflow the drain trough and drip down to the bottom of the compartment. If the defrost drain is frozen, thaw it out and ensure that the drain is clear of debris.

Gaggenau Refrigerator freezer is cold but refrigerator is warm
The defrost heater assembly turns on a few times throughout the day to melt away any frost that may have accumulated on the evaporator coils. If the defrost heater assembly is defective, frost will continue to accumulate on the evaporator coils, and the coils will become plugged with frost. If the evaporator coils are frosted over, the airflow through the coils will be restricted, causing the refrigerator not to cool. Check the evaporator coils to determine if they are frosted over. If the evaporator coils are frosted over, test each component of the defrost system.

Gaggenau Refrigerator leaking water
If the defrost drain is frozen, the water will overflow the drain trough and drip down to the bottom of the compartment. This water can eventually leak onto the floor. Check the defrost drain to determine if it is clogged or frozen. If the defrost drain is frozen, thaw the ice. In addition, flush the drain with hot water to ensure that it is clear of debris.

Gaggenau Appliance Error Codes

Gaggenau appliance fault codes

Gaggenau appliance diagnostic codes

Gaggenau appliance error symbols

Gaggenau appliance common faults

Product Reviews:

The performance is topnotch, one of the best in the industry. I have no com

The performance is topnotch, one of the best in the industry. I have no complaints about any area of its performance. The value is very affordable and right for what it does. If you're looking for something that's great and works to its highest ability this is it. The appearance can't be beat by anyone out there. It's very nice looking and will fit in any style kitchen perfectly and won't be in the way of other things. The size is great for this product and works just as great if not better than any other product out there. I would recommend this to anyone.

Published: September 16, 2016

Zackary of Reading, PA