If you're looking for help fixing your Haier Dishwasher, look no further! Our comprehensive Haier Dishwasher repair guide will explain common issues, provide tips, and maybe show you how to repair your appliance.

For the home, kitchen and beyond, Haier manufactures appliances that homeowners have come to trust. Even a trustworthy appliance requires occasional maintenance or repair, however. If you’re in need of Haier appliance repair from experienced professionals, your local Appliance Helper can help.

Haier Dishwasher not cleaning 
Water Inlet Valve. The water inlet valve opens to allow water to enter the dishwasher. If the valve is clogged or defective, the dishwasher won’t get enough water to clean dishes properly. If the water inlet valve is clogged, replace it. Do not attempt to clean the water inlet valve—cleaning the valve could make it more likely to fail. 

Haier Dishwasher not draining 
Drain Impeller. The drain impeller pushes water through the drain hose and into the garbage disposer or drain line. If the impeller is broken, replace it. 

Haier Dishwasher buttons not working 
Touchpad. First, confirm that the dishwasher display is working. If the display is still working, try pressing some of the touchpad buttons. If some of the buttons respond correctly but others don’t, it is likely that the touchpad is at fault. (Some manufacturers sell the touchpad separately from the control panel. Other manufacturers require that you purchase the touchpad and control panel together. If you cannot replace the touchpad individually, replace the touchpad and control panel.) 

Haier Dishwasher lights flashing or blinking 
Heating Element. The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it. 

Haier Dishwasher leaking 
Water Inlet Valve. The water inlet valve opens to allow water to enter the dishwasher. If the water inlet valve is stuck open, the dishwasher will continue to fill with water until the dishwasher leaks or overflows. If the water inlet valve is at fault, replace it. Water inlet valves are not repairable—if the valve is defective, you must replace it. 

Haier Dishwasher leaking from motor area 
Impeller and Seal Kit. First, try to determine the source of the leak. If the water is leaking from the motor shaft area, the motor shaft seal is likely defective. If the seal is defective, replace it. (Some manufacturers sell the seal independently of the impeller. Other manufacturers require that you purchase the impeller and seal together. Still other manufacturers require that you purchase the entire pump and motor assembly instead of the impeller and seal. It is usually more cost effective to replace the impeller and seal kit rather than the pump and motor assembly.) 

Haier Dishwasher won't start 
Door Switch. The door switch prevents the dishwasher from running while the door is open. If the door switch is defective, the switch will prevent the dishwasher from running even when the door is closed. To determine if the door switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it. 

Haier Dishwasher won't latch 
Door Hinge. If the door hinges are damaged, the door won’t be able to latch properly. Inspect the door hinges for damage. If a hinge is bent or broken, replace it. 

Haier Dishwasher dispenser not dispensing soap 
Bi-Metal. The bi-metal actuator is a metal loop which acts as a latch for the dispenser door. As electricity is applied to the bi-metal, it deforms and bends away from the latch, releasing it. If the bi-metal is burned out, it won’t release the dispenser door. To determine if the bi-metal has burned out, use a multimeter to test it for continuity. If the bi-metal does not have continuity, replace it. In addition, make sure that the dishwasher is getting enough water. If the water level is too low, the wash motor may not draw enough current through the bimetal, causing the bimetal not to bend enough to work properly. 

Related Error Code Pages:
Haier Refrigerator Error Codes, Haier Range Error Codes, Haier Washer Error Codes, Haier Dryer Error Codes, Haier Microwave Error Codes, Haier Dishwasher Error Codes,

Related Troubleshooting Pages:
Haier Refrigerator Troubleshooting, Haier Range Troubleshooting, Haier Washer Troubleshooting, Haier Dryer Troubleshooting, Haier Microwave Troubleshooting, Haier Dishwasher Troubleshooting,

Related Repair Pages:
Haier Refrigerator Repairs, Haier Range Repairs, Haier Washer Repairs, Haier Dryer Repairs, Haier Microwave Repairs, Haier Dishwasher Repairs,

Related Parts Pages:
Haier Refrigerator Parts, Haier Range Parts, Haier Washer Parts, Haier Dryer Parts, Haier Microwave Parts, Haier Dishwasher Parts,

Related Price Pages:
Haier Refrigerator Prices, Haier Range Prices, Haier Washer Prices, Haier Dryer Prices, Haier Microwave Prices, Haier Dishwasher Prices,

Related Pages:
dishwasher lowest price, residential dishwasher system, dishwasher unit repair, dishwasher repair prices, nearby dishwasher repair,