Appliance Types


Appliance Brands


Article Categories


More Articles


Haier Range Error Codes
Haier Range Error Codes

Haier Range Error Codes

If you're looking for help fixing your Haier Range, look no further! Our comprehensive Haier Range error code guide will explain common issues, provide tips, and show you how to read your model's error codes.

No Error Codes For This Product At This Time.

Haier - Electric Cooktop Heating Elements Turn Off And On 
In order to maintain a set temperature, it is normal for radiant elements to cycle on and off (glow red and then go dark) during operation. 

Haier - Steam Or Smoke From Electric Range 
If there is smoke or steam coming out of the oven, this can be normal. There is a vent on the oven, and depending on the item being cooked, it can be normal to see steam and vapors coming from the oven vent during baking or roasting. 
It is also normal for heat to transfer from the vent to the cooktop surface. Make sure this is not blocked on the cooktop. 

Haier - Top Of Range Is Hot 
If the top of the range is hot while the oven is in use, there is a vent on the oven that vents steam and heat that can transfer to the cooktop surface. Make sure this is not blocked on the cooktop. 
If the surface is hot while using the burners, check the size of the pan being used. An oversized pan can trap heat. 

Haier - Oven Cycles On And Off While Cooking 
The electric bake and broil elements or gas glo-bars will cycle on and off as the oven temperature rises above and falls below the desired temperature. 

Haier - Range Fan Stays On 
There is a cooling fan that will continue to run after oven is turned off. The fan turns off automatically when the electronic components have cooled sufficiently 

Haier - Gas Burners Clicking 
If the burners are clicking continuously, verify the knobs are not in the ignite position. Rotate the knobs to ensure the selector is not stuck. When one burner is set to ignite, all igniters turn on. 

Haier - Range Power Interruption 
In the event of a power failure, all settings, including the time display, will be lost. 
Ranges and cooktops with gas surface burners: 
In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise until the indicator is aligned with MAX. After the burner is lit, turn knob to desired setting 
If the flame is extinguished, the safety valve intervenes by shutting off the gas to the burners.

Haier Oven not heating 
Igniter. The igniter is the most commonly defective part for an oven not heating. The igniter has two main functions. First, the igniter draws electrical current through the oven safety valve to open it. Second, the igniter gets hot enough to glow and ignite the gas in the oven burner. If the igniter gets weak, it will fail to open the safety valve correctly. If the valve does not open, the oven will not heat. To determine if the igniter is defective, observe the igniter when the oven is on. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. If the igniter is weak, replace it. If the igniter does not glow at all, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it. 

Haier Oven doesn't bake evenly 
Bake Element. If the bake element is burned out, the oven will only be heated by the broil element. This will cause the oven to heat unevenly. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it. 

Haier Oven broiler not working 
Broil Element. The broiler element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it. 

Haier Stove heating element not working 
Surface Element Board. The surface element board has relays that regulate the power supply to the burners. If one or more of the relays fails, the surface element won’t work. If two or more burners fail at the same time, this indicates that the surface element board is likely at fault. If only one surface element won’t work, use a multimeter to test the element for continuity. If the surface element has continuity, the surface element board might be defective. 

Haier Stove burner won't light 
Spark Module. The spark modules provides power to each surface burner spark electrode. If the burner is produces a weak spark, or if the burner sparks intermittently, the spark module might be defective. Before replacing the spark module, first check the spark electrode and the spark wire. If the spark electrode and spark wire are not at fault, the spark module is likely defective. If the spark module is defective, replace it. 

Haier Oven temperature not accurate 
Bake Element. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it. 

Haier Oven light is out 
Light Assembly. If the oven light is out, the entire light assembly may need to be replaced. Often the light assembly components are not sold separately. 

Haier Oven won't turn on 
Bake Element. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it. 

Haier Oven not self-cleaning 
Door Lock Motor and Switch Assembly. During the oven's self-cleaning cycle, the door lock switch activates the door lock motor to prevent the oven door from being opened. If the door lock motor and switch assembly is defective, the oven door will not unlock once the self-cleaning cycle is complete. On most ovens, you can open the oven door by removing certain screws or panels. Check your owner's manual for further instructions. 



Related Error Code Pages:
Haier Refrigerator Error Codes, Haier Range Error Codes, Haier Washer Error Codes, Haier Dryer Error Codes, Haier Microwave Error Codes, Haier Dishwasher Error Codes,

Related Troubleshooting Pages:
Haier Refrigerator Troubleshooting, Haier Range Troubleshooting, Haier Washer Troubleshooting, Haier Dryer Troubleshooting, Haier Microwave Troubleshooting, Haier Dishwasher Troubleshooting,

Related Repair Pages:
Haier Refrigerator Repairs, Haier Range Repairs, Haier Washer Repairs, Haier Dryer Repairs, Haier Microwave Repairs, Haier Dishwasher Repairs,

Related Parts Pages:
Haier Refrigerator Parts, Haier Range Parts, Haier Washer Parts, Haier Dryer Parts, Haier Microwave Parts, Haier Dishwasher Parts,

Related Price Pages:
Haier Refrigerator Prices, Haier Range Prices, Haier Washer Prices, Haier Dryer Prices, Haier Microwave Prices, Haier Dishwasher Prices,

Related Pages:
range unit service cost, local range services, range lowest price, range service cost, high efficiency ranges,


Haier Range Error Codes

Haier Range fault codes

Haier Range diagnostic codes

Haier Range error symbols

Haier Range common faults


Product Reviews:

I purchase this ref. in August, 2013. In October the food was freezing in t
I purchase this ref. in August, 2013. In October the food was freezing in the refrigerator. Tried to return item to Lowes. They said the return date has expired and call Haier. October 30, called Haier customer service numbers. They sent arranged and sent repair person, upstate appliance. Repair person arrived 10/30/2013, examine the ref. Stated it was broken thermos and other items was broken. Stated the part will take about 2 weeks to arrive. After 2 weeks I call the company again and Haier they confirmed the statement. I then started call Haier customer service. Spoke with Sarah asking for them issue a credit for a better ref. Told she had to contact admin. for approval. I DID not want a replacement on a new ref just credit for purchase of another. Nov 11 2013 call again told the issue has not been resolve. Food is over freezing.
Published: November 20, 2013
Deloris of Long Beach, CA
Source: consumeraffairs.com

The oven is competitively priced at about $1200. Sadly it arrived with tray
The oven is competitively priced at about $1200. Sadly it arrived with trays that don’t stay in the rungs. This means when you put anything in the trays they collapse down to the bottom of the oven, which is perilous. So we called and they sent new trays. They didn’t fit. So we called and they sent a guy round who said the inside of the oven is defective and bowed. So we called again. They said they don’t have any installers that can do the wiring so we have to arrange for an electrician to remove the wiring and then another visit to install the new wiring. They said they will offer $150 to pay the electrician. (No way you could get an electrician round for that in Boston.) There is no option of a full refund. I wish I had bought the Bosch one. This company basically doesn’t really stand behind its products and it seems the products are prone to defects. Just duck this company (Haier brand) completely. Amazingly poor aftercare service and almost nonexistent complaints proceedings. Considering legal options.
Published: December 13, 2018
Ben of Boston, MA
Source: consumeraffairs.com

I have purchased Haier HSU18C-NMW3B model which having self clean technolog
I have purchased Haier HSU18C-NMW3B model which having self clean technology. Self clean Technology provides complete wet wash of AC's indoor unit and keeps air clean with better cooling. It comes with hyper PCB which helps to provide cooling in extreme temperature up to 60 degree. Triple inverter Technology helps to take care of my cooling, my comfort and voltage fluctuation worries. Thanks to Haier for such wonderful product.
Published: July 7, 2020
Vicky of Gurajat, Other
Source: consumeraffairs.com

Several follows ups service person came for installation after 7 days. At t
Several follows ups service person came for installation after 7 days. At the time of installation display was not working, so we have contacted area manager and he promised will replace the new instruments within the couple of days. 10 days crossed now he his picking my phone calls. Now I have plan to surrender the instrument and go for the better brands. Once again I request you to please dont purchase Haier brand oven.
Published: October 24, 2018
PURUSHOTHAM of Other
Source: consumeraffairs.com

I searched all over for the best fridge for my home bar area. I wanted one
I searched all over for the best fridge for my home bar area. I wanted one that could chill white wine as well as beer/soda at the same time. I came across this: Haier Combo Wine and Beverage Center model Model #: HBCW100ABB at Sams Club. It looked perfect. Nice glass door, interior lighting, dual zone. It got good ratings on the Sams Club Website 3.5 out of 5 stars. I figured what could go wrong? It was DOA- came out of the box with the following problems:It did not cool either zone- at all- kind of defeats the purpose yes? The LCD temp display in each zone acted like it was from another planet - thinking it was 27 degrees at room temp. When I go to lower it, I can lower it all the way to 4 degrees F!? The range supported is not displayed at all on the little screens. Essentially this is just Chinese junk.The fun comes when I call the OEM (Big bold letters NOT TO RETURN). I call them after following all instructions in the book - do not turn on for at least 1 day, wait for it to cool down, so forth. They say they will send someone and to wait a few days. I called back today and was told - yeah sorry we are not sending anyone because no one local to you (DC area - 30miles outside of downtown) can work on it. They were going to process a refund that I MIGHT see in 30 days. That was it - no explanation and no results. What a joke. I processed a return on Samsclub.com and will return it tonight. I would buy nothing at all from this company. They are moving crap product fast and hoping to get around warranty and refund to make money. Steer clear!
Published: March 17, 2014
Eric of Leesburg, VA
Source: consumeraffairs.com

I purchased 4 GE CAFE appliances January 27, 2019. The fridge and stove wer
I purchased 4 GE CAFE appliances January 27, 2019. The fridge and stove were defective. The second fridge they sent was defective as well and was returned. I still have yet to have customer service call me back about my stove. It is now one month that I have a defective stove. I am not buying another GE fridge and currently do not have a fridge. Its terrible to know that your expensive appliances are defective and one has to fight every day for someone to follow up. I had GE products for 29 years previously but obviously now the quality of products and service has gone downhill maybe since Haier has taken over??? Where is quality control? Are all the appliances refurbished hence the issues? Am I getting someone elses returned product? The whole experience has been so disappointing. Customers should expect working appliances and excellent customer service. I do not expect service done on brand new appliances that have not even been plugged in. That is unacceptable.
Published: March 4, 2019
Krystyna of Whitby, ON
Source: consumeraffairs.com

I really appreciate the work of your Thane branch engg Mr.Raghu ** services
I really appreciate the work of your Thane branch engg Mr.Raghu ** services engg, he comes for installation of refrigerator after his working hours also over and he really help us. Thank you so much Haier for your help and for a lovely product.
Published: December 7, 2017
Navin of Kharghar, Other
Source: consumeraffairs.com

This is a follow up of my complaint from Sept. 26th. I finally got through
This is a follow up of my complaint from Sept. 26th. I finally got through to them and they told me that I would receive a refund check. Well here it is Dec. 4 and still no check. I called again and they said they had to have more substantial documents to show where I purchased the Haier convection oven, even though I sent in three documents to show where I bought it from. They called me today to tell me that my particular oven that I bought for $399.95 is only worth $200.00 now. Have you ever heard anything ridiculous before? I am at my wit’s end. I have done everything they told me and I am still getting the runaround. I’m fed up!
Published: December 5, 2012
Roy of Rosiclare, IL
Source: consumeraffairs.com

DO NOT BUY ANYTHING from this manufacturer!! I bought a fridge and after 5
DO NOT BUY ANYTHING from this manufacturer!! I bought a fridge and after 5 months stop working. THEY DENIED returning my money and told me to take the fridge to their shop. I am a woman. How I am suppose to carry a fridge left and right??? So I need to pay someone / arrange people to help me with this. So inconvenient and doesnt worth my money and time.
Published: August 14, 2016
Polina of Aurora, IL
Source: consumeraffairs.com

Observations: Ignition issues. All burners work properly without a flame he
Observations: Ignition issues. All burners work properly without a flame height adjustment. Oven broiler ignites properly and functions well. Oven will not ignite using built-in igniter. Must remove oven bottom panel burner cover to light. Can hear the click of the igniter, do not see spark. To ignite must turn on gas to 300º setting. Igniter can be heard clicking. Can be ignited by holding lighter to jet area. Using the lighter the oven will light for about 5 seconds and then goes out. Must repeat. Usually takes at least 2 tries, if the lighter is not directed at the thermocouple nipple for approx. 30 seconds. Exterior heat issues. When the oven is on, the top surface gets extremely hot. E.G. warm to touch front of cooktop. From midline to rear of stove hotter than is comfortable to touch. Back vent area extremely hot. Question safety of that amount of heat and the wall surface 2” away. The oven door vents “blow” a significant draught of hot air. Not comfortable to use top surface with that amount of heat blowing in my face. The significant breeze is aggravating. This amount of hot air will NOT be acceptable if outside temperature exceeded 50º. It heats the entire kitchen.Oven temperature issues. I believe the oven temperature component is not functional! The manual that was included with the stove references the pre-heat light. There isn’t one! Setting the temperature to “min” results in internal temperatures 375 to 400º. Setting the temperature for 300º results in internal temperature of 375 to 400º. Setting the temperature to max (dial turns approximately same distance past the 450º setting as the increments of 50º in all other dial settings) results in internal temp of 450º. Setting the temperature to 350º results in internal temp of 425 to 450º. Using convection fan does not appear to impact the errant temperatures.General observations. This stove is unusually high. 36 3/8” BEFORE you put the legs on. The timer makes no sound when it completes a timed event. The “dirty gray” burner setting and oven control markings on the front panel are almost impossible to see against the black background. The front control panel is perpendicular to the floor, so to read settings requires bending to get a readable angle. Magnets hold very well on everything but the stovetop and oven handle. This is advertised as a stainless-steel stove.
Published: January 26, 2019
Sandra of Kosse, TX
Source: consumeraffairs.com

An absolute nightmare from start to finish. Bought the fridge freezer five
An absolute nightmare from start to finish. Bought the fridge freezer five years ago. It broke down six times within three years and was replaced. On each occasion had to spend over two hours on phone before help line answered and arranged technician to come round - three weeks later! Replacement almost as bad. Broke down three times, then had reasonably good run of just over two years - so warranty ran out when it packed up yet again. Freezer okay, but rotor driving cold air from freezer to fridge kept icing up. Same problem, eight different technicians but all unable to solve problem. Am now looking for another fridge. Great shame. Fisher and Paykel used to be great company, with ultra reliable appliances, but gone to dogs since taken over by Haier.
Published: March 3, 2021
Paul of Labrador, Other
Source: consumeraffairs.com

The Haier range arrived too damaged to use. I contacted Customer Service wh
The Haier range arrived too damaged to use. I contacted Customer Service who reviewed the pictures they requested and eventually settled upon offering me $50.00 for a range that I purchased for $1,435.00 without a replacement range. It seems this is a criminal matter. The retail store which I purchased the range from, eventually honored the purchase. This is not how companies in the U.S. operate. Shame on Haier and their company policies. It is absolutely ridiculous.
Published: August 23, 2017
Maureen of Barryville, NY
Source: consumeraffairs.com

I had Haiers 2.0 cubit foot Washer Dryer Combo Unit in white for six months
I had Haiers 2.0 cubit foot Washer Dryer Combo Unit in white for six months before it broke. It took three months to get it fixed/replaced. The entire process was utterly bizarre, and a small nightmare of customer service insanity. Heres a breakdown of what went on: Number of times I took off from work, rearranged my schedule, and stayed home for an all-day service window appointment, all so that at the end of the day I still didn’t have a washer dryer combo unit that would wash (or dry) my clothes: SEVEN (7). Number of times truly bizarre and eldritch things which occurred during repair process: EIGHT (8). Specifically, 1- Haier at first contracted with a repair company that DOES NOT REPAIR HAIER MACHINES. 2- Haier’s computer system doesn’t tell Haier if the repair request has been rejected by the repair subcontractor.3- Haier reported that they had no one who would repair in my area. (I live in Buffalo, NY, half way between Chicago, Washington, DC, and NYC... not in North Dakota, or Alaska.) 4- Haier’s repair subcontractor is not allowed to stock any parts on the truck. They must all be special ordered, one at a time. Which takes weeks. Each time. For each part. Which are all back ordered, or simply out of stock. And the parts aren’t guaranteed to work, when installed. Ask me how I know.5- The first replacement washer dryer combo unit arrived, broken, having obviously been dropped somewhere in transit. The sides were bulging. 6- Haier’s repair subcontrator tech begs me on two separate visits to get Haier to send me a replacement, because the number of times he has come out, only to not be able to fix my machine is messing up his ratio of visits to closed cases. 7- Haier’s robo call system is guaranteed, I discovered, to call me with dire threats should I not return a call, when I have already in fact returned that call, or dealt with that business – yet it happened every single time. 8- Haier’s customer service personnel routinely claim they have called or emailed, or will call or email, and they haven’t or don’t – and not because I’ve called instead. They just don’t. If I didn’t keep such meticulous notes of our interactions, their gaslighting might have worked.Number of times I received an email from Haier saying that they had called me when they hadn’t, or promised to call me on a certain date and then they didn’t: TEN (10). Number of times I received a call from Haier citing an email they had sent, that I never received: TWO (2). Number of robo calls I received informing me that I MUST call Haier back immediately for something that I already called Haier about earlier in the day: TWENTY-THREE (23). Amount of laundry reimbursement received from Haier, over the course of three months without a laundry machine: ONE HUNDRED DOLLARS ($100).Full disclosure: The maximum is usually $75, so I was told by Haier. When I pointed out that their average wait time for repair couldn’t possibly be on the order of months, I was granted an extra $25. Number of months I had clothes locked and getting disgusting in my laundry machine: THREE (3). Number of irreplaceable items of clothing that were locked in said machine for three months: TWO (2). Specifically, 1- The race t-shirt from my first half-marathon. 2- The hand-embroidered handkerchief one of my sisters brought me back from Italy.Number of otherwise expensive or difficult to replace items of clothing that were locked in said machine for three months: THREE (3). Specifically, 1- A pair of work pants from Lane Bryant that had been tailored to fit me. 2- A clergy shirt I had made out of tech fabric. 3- An insulative base layer I made for my husband. Number of times Haier asked me if I had receipts for any of my clothing locked in the machine: FIVE (5).Amount of clothes reimbursement received from Haier, after duly sending pictures of all the clothes, once they were out of the machine: ZERO DOLLARS ($0). Full disclosure: I’ve been told by Haier that the standard reimbursement is no more than $150. When I finally asked how much we would get, I was told, “the company has declined your request for reimbursement.” And you know, $150 would have replaced my one work outfit, and nothing else – a clergy shirt, and a tailored pair of pants – but it would have been something. A token gesture. A token gesture which would have kept me from shaming the corporation online. The token gesture I did get was an extended warranty, on top of the standard one-year manufacturer’s warranty for the newly delivered replacement. For how long, you ask? A year? Two years? Five years?...no. Six months extra.
Published: July 24, 2018
Sarah of Buffalo, NY
Source: consumeraffairs.com

Bought a Haier appliance package from The Home Depot. My kitchen isn't
Bought a Haier appliance package from The Home Depot. My kitchen isn't so big so I had to go with smaller appliances. The associates at Home Depot helped me find everything. 18'' Dishwasher, 24'' Range and over the range microwave, as well as a small awesome four door fridge that Haier makes. Did you know Haier owns GE now? Anyways. Delivery was questionable as the dates got pushed back 3 times... However, Home Depot issued me a $200 credit just for the wait. Finally received appliances and have had them for a year now. They work great so far! Extremely please with the aesthetic and functional quality.
Published: February 3, 2018
Christopher of Colorado Springs, CO
Source: consumeraffairs.com

We purchased a new Haier stove, model HCR2250AES in March 2019. In early Ma
We purchased a new Haier stove, model HCR2250AES in March 2019. In early May, the knob for the back right burner fell off. I called Haier as the stove was under warranty and a technician from Public Electric came to look at it. He said he would order the part, which would take 10 to 12 days. It is now July 25 and the stove is still not repaired, despite repeated phone calls to both Haier and Public Electric. Basically, there are two complaints here. The first is that the stove broke so soon after purchase. However, that sometimes will happen. The more serious complaint is that the repair has taken so long.
Published: July 25, 2019
Maureen of Halifax, NS
Source: consumeraffairs.com

I bought Haier Ac HSU-19C-TFW5 last month. I bought it for my parents. It g
I bought Haier Ac HSU-19C-TFW5 last month. I bought it for my parents. It generates very Less noise and gives highest cooling because its fan and compressor work on dual DC inverter technology. And it has a very wonderful feature of self clean, where AC cleans itself on just a push of a button. It gave us a sense of security that we don't require any service guy to come to our home in present pandemic scenario. I really love Haier Ac's performance and commitment to deliver what they claim. Wonderful product, I recommend to buy Haier AC.
Published: July 7, 2020
Alok of Karnal, Other
Source: consumeraffairs.com

Your product is very good working but its spare parts is not available in m
Your product is very good working but its spare parts is not available in market. For example my mobile l50 it's touch break and touch is not available in market so my product is waste but your product working very good.
Published: January 1, 2020
Y. of Lahore, Other
Source: consumeraffairs.com

In June of this year, I ordered a Haier convection oven for $399.95; and wh
In June of this year, I ordered a Haier convection oven for $399.95; and when I received it, the handle was broken on the door. I called Haier warranty exchanges, and they gave me a ticket number and told me to send it back for a replacement. I waited and waited and didnt receive a replacement. I then called them, and they said they didnt have the style I wanted and asked me if a replacement of equal or higher value would be alright. I said that would be alright if it was the same size as the one I ordered. They said they would send one and expect it in 7 to 9 business days. Well, I waited three weeks and still no oven. I called them on the 26th of Sept. and asked them why I havent received my replacement oven. They told me that they could not send a replacement oven and they would send a refund check in 45 days. Why forty-five days! They have lied to me every time I’ve called them. I will never buy another Haier product, ever!
Published: September 26, 2012
Roy of Rosiclare, IL
Source: consumeraffairs.com

I have baked for many years. This year bought a new range. Just had it chec
I have baked for many years. This year bought a new range. Just had it checked and was told that I had to turn my racks during baking. I have never had to do this before. I took a picture thinking that this could somehow be fixed if they could see the problem. The back corner of one side of oven is over-browning. They said that nothing could be done. I am supposed to turn racks. The technician showed me one small line in my paperwork that most would not see and surely don’t see until after you have purchased. The worst part is I have an extended warranty on a range that I consider to be sub-standard.
Published: October 22, 2019
Frances of The Villages, FL
Source: consumeraffairs.com

I purchased a Haier stovetop hood, the control pad is placed right where th
I purchased a Haier stovetop hood, the control pad is placed right where the oil and grease is directed out of the kitchen. By designing that way, the contacts quickly become contaminated, and no longer respond. I called Haier a number of times, they refused to help in any way. I even ask if they just send me another switch, Id pay to have it installed myself, they refused. I would never buy a Haier again, and I strong urge others not to buy from them. They are there to sell, and after that, you no longer want anything to do with you. Id definitely stay away from anything Haier.
Published: November 3, 2017
R. C. of Dalmatia, PA
Source: consumeraffairs.com

Visa MasterCard

Site Secured By The Website Guardian
TOP