I purchased my second KitchenAid in 2005 since we were renovating our kitchen and wanted the counter depth model. I already had a KitchenAid that I was happy with, though it was only 2 years old. Within 18 months, the ice maker stopped working in the new one. We didnt replace it right away and we just used the ice from our other one, which was now in our basement as a second refrigerator. We finally had a new ice maker installed in July 2009 at a cost of $200, parts plus labor. Again, 18 months later (with a 1 year warranty), the ice maker stopped working. We went 2 more years without fixing it but finally did on February 27, 2013 at a cost of $242 when we needed it for a large family gathering. It broke again last week, June 20, 2014. 1 year and not even 4 months from the install date. It was suggested by the repair company that there may be a recall and I should call KitchenAid myself. After speaking to a customer service rep and then her supervisor, I was told they only warranty it for a year. Period. I explained that there was obviously a defect in my refrigerator, but that didnt seem to matter. They would have a service person come out for the usual fee. Meanwhile, my 11 year old other KitchenAid has started freezing food - but guess what? At least the ice maker works!! So unless you want to buy two of them to work as they should, I would buy another brand.

On Saturday, the KitchenAid over the stove microwave/convection (model KHHC2090SBL) caught fire before my eyes. Serviceman yesterday said the magnetron had burned holes within the machine and was not replaceable. Unbelievable! Has this product been recalled? What is wrong with this manufacturer allowing this product to be sold?

Apparently, the rocket scientists at Whirlpool have decided we all want the vent fan to push heated or cooled air out of our homes the entire time our microwave runs. So the electronics theyre using are so poorly designed they cant tolerate normal operating temperatures. Ovens like this have been sold for more than 30 years without the need to run the vent fan like this. Buyer beware!

KUDS35FXSS 8 is a Kitchen Aid dishwasher that has an obvious design flaw. We had a similar style KitchenAid at our last house which was a good product. When we built our new home we got the next level up. In less than 1 year, 3 of the small plastic pairs of clips that hold the wheels on the upper rack broke off. Today the dishwasher would not go into wash cycle and after watching a how-to video I found 3 of the little plastic triangle clip parts in the food chopper. One was wedged against the chopper blade. I removed it and the dishwasher works again. I wired on the top rack wheels with stainless steel wire. The lady at the service center said that they hadnt heard of the problem. We bought it a few months before installation so nothing was going to be covered. A friend just had the same rack breakage issue and several people on this site say so too. CHECK THE SMALL PARTS WHEN YOU BUY!

Ill try to keep my comment short. We built our house two years ago; and all new Kitchen Aid appliances were bought. I have no complaint with any of them (refrigerator, microwave, dishwasher) except for the range. I have had difficulties on occasion when the oven would not preheat. However, my biggest complaint is with the Aqualift self-cleaning feature. It doesnt work well at all. I dont want to scrape, scrub, reach into the oven to clean. Im getting too old for that. I truly would not recommend this type of range to anyone unless they want a workout cleaning the oven.

Purchased new microwave (KMHS120ESS-2) in April 2016. Heating element failed in March 2017 and was repaired under warranty. Heating element failed again in May 2017. Element was under warranty but labor (greater cost of the two) was not. Believe problem not the element but something else that triggers the failure. Consumer beware of both poor quality of product and failure of the company to properly diagnose the root cause of the problem.

KitchenAid Aqualift model KGRS306BSS - This is by FAR the worst oven I have ever had the misfortune of purchasing. Where to begin...? The glass door has condensation build up between the outer and inner panes. The oven heat vents through the FRONT of the oven door right below the gas burner knobs which makes them hot and difficult to use when both oven and burners are in use. The gas cooktop itself has so many indentations that cleaning spills/residue is a multi-towel project by itself not to mention the materials used to make the cooktop hold on to residue like Ive never seen. Theres another oven heat vent at the rear of the cooktop below the control panel for the oven which can heat up the key pad above it. When the oven is in use for prolonged baking (think turkey), the rear right burner gets hot when not in use. If I could shout it from the rooftops I would tell the world not to buy this oven and to forget about KitchenAid all together as an appliance brand.

When I purchased my dishwasher, I was told that KitchenAid racks were guaranteed not to rust or break down. I purchased my model, serial# kuds03ctss on 11/21/2007 and its racks are doing just that, causing rust stains on my silverware. When I called in repair, I was told, You must talk to the manufacturer. Thats not something we can handle. Well, I am talking to you. This was one of the big selling points of your product. Will KitchenAid stand behind their product and replace my racks?

4 1/2 year old KitchenAid dishwasher had issues under warranty, now top rack adjusters and top rails are failed. Whirlpool will warranty the rack but not the junk that is engineered to break. We spent 300 to fix that then the unit started to leak. Now the whole thing will go to the dump to join all the other appliances built to last 2-5 years. We had issues with Kenmore brand as well and never entered a Sears store again. The same will apply with any brand Whirlpool makes from now on.

This is our first Kitchenaid brand refrigerator and has been the best refrigerator that we have ever owned. It is feels substantial when opening/Closing the doors and drawers. Very spacious and well-designed storage. Would not hesitate to buy this brand again.

Double oven KERS505XSS has been headache. Service techs have replaced motherboard 3 times. I need to shut off breaker and restart to get working again. Luckily still under warranty. Dishwasher required 3 service visits. Refrigerator -5. All since 2010. Utter garbage!

I love the stainless steel interior. The dishes come out clean on light China wash. It is 8 1/2 years old and I have had no problems. This is my second KitchenAid dishwasher. I recommend it.

Kitchenaid Dishwasher KUDS301XBL7 - The plastic rollers on the top and bottom are cheap and break a couple of years. We have replaced 3 out of 4 roller assemblies and anticipate the 4th to go soon. Also, the controls on the front are very touchy. If you lean against the counter and accidentally touch the dishwasher/control board, it will turn on or start cycling. This forces you to lock the panel, but that is not convenient. Dishwasher works well and have no problems with it.

I am a semi retired senior that saved to purchase my last (what I thought at the time) kitchen range. I have owned KitchenAid ranges in the past and have been very pleased. There were two reasons I purchased this particular brand, it doesnt make any fan noises and for the self cleaning system. To my delight the stove is very quiet and allows an option to turn off all the normal beeping noises and the elements work well. That being said I have never been so disappointed with an oven cleaning system, it DOES NOT WORK AT ALL and yet the company continues to produce this system misleading the public. To me this is a criminal offense except I have no way to make them accountable. I am so disappointed with KitchenAid that they would associate themselves with such an inferior product. It is crucial for me to have a self clean oven and as one of thousands I am now stuck with a product I have come to hate in my kitchen. I am an avid cook and now find there are many products I am unwilling to cook as I have no way to clean my oven. I made wonderful Yorkshire puddings the other night and my husband spent two hours trying to clean the oven but the interior is so shoddy (not really a porcelain coating just some cheap material that cant withstand a proper cleaning and wont come clean with water being heated to 200F doesnt matter how many times you try). The first time after I used the self clean (I have only had the stove for 4 months and cleaned it 5 times) I sat down and cried, having spent so much money and having so much disappointment was a bit overwhelming. I called the place I bought it, they are really great, said the only thing they could do was to sell me a different stove at cost. I appreciated that but I now dont have the funds to do this or I would just to get rid of my stove. I have an extended warranty but this is not considered a warranty issue. I really have trouble with KitchenAid not standing behind their product but more so with a problem they know exists but keep producing, and as consumers we seem powerless to enforce change. As a side note, the oven wasnt hot enough and it does have an option to calibrate the temp. but even so because the oven is not well insulated or made of quality porcelain. During the cooking the temp. can drop as much as 50 degrees before it heats up again which can really affect the cooking process. So all around in general not very happy.

We just built a house and bought all new shiny appliances, including a KitchenAid refrigerator side-by-side, counter deep, very expensive. On DAY 1, the freezer temp was raising, we kept lowering it back to 0 F. On DAY 2, it doesnt go below 16. Now day 5 and its 32, and doesnt respond to pushing temp control down. Technician may come tomorrow. Meanwhile, food will start spoiling. Also, no instructions came with it, except how to install. Gee, thanks! NOT BUY THIS!

With only 23 months of use, two of your KitchenAid products have failed. One, an Architect series refrigerator, quit and we were told the replacement part would not be available until January of 2020 (not typo). They had only 3 rebuilt computer control boards in the country and agreed to send one with a promise to return my bad one. Done. Now my Architect series oven/ microwave unit has been out since January of 2015. The service company they recommended has been out four times replacing parts they suggested and sent to them, with me only paying the service fees, and it still does not work. The tech department says they do not know how to fix it. They say to replace it. I have been offered a replacement for the small sum of $1,800 for a $3,650 unit I was able to use for 2 years and is not repairable now. It has an internal communication problem, code F6E0. Why would I buy another unit from a company that cannot repair what they sell. Take 5 minutes and Google error code F6E0, there are hundreds of complaints about the same code in all Whirlpool and KitchenAid brands and none have been repaired. Every appliance I have is KitchenAid, never will I buy another nor would I ever recommend them. I plan to post this notice everywhere I see KitchenAid or Whirlpool listed. Before anyone buys from Whirlpool or any of their brands, Google this error code first.

We bought last July KitchenAid refrigerator. Seven months later we could see some issue with discoloration of the bottom door. I contacted KitchenAid service, they explained, the cosmetic of the surface is not under the warranty. I have extended 5-years warranty, but it is not cover cosmetic issue. We bought this refrigerator in Best Buy, but nobody explained about this type of issue. KitchenAid service can change this door if I will pay $500. I believe I paid a lot for this refrigerator and I am not going to pay $500 for factory non quality product.

Dishwasher just quit working about 3 weeks ago. After about one week, I tried cleaning the inside. The bottom was all rust. When I went to wipe it out I got shocked. Needless to say, I left it alone. Called technician in and he said it was the worse dishwasher he had seen. The seal on the motor evidently leaked and blew out all the functions for operation. It would be too expensive to repair. Here is a picture of the dishwasher. This dishwasher was installed 2 years and 1 month ago.

Have a side by side since 2012 and have lost refrigerant multiple times. They cannot seem to fix the problem and insist their service techs come out. Service tech was useless and the problem that was fixed is broken yet again. They are now telling me I will be responsible for the diagnostic visit and depending on what is wrong, may have to pay to get it fixed. I have had technicians out more times than I can count. Also the drawers broke the first year I had it and I tried to fix them. After a while, I bought new ones, which broke again after 2 months. I am done with this company not only because the appliance is junk, but they wont stand behind their product.

We purchased a KitchenAid (R) 5-Burner Gas Freestanding Double Oven Range 4 years ago. Almost from the beginning, we have had problems, particularly with the controls. We have had to replace one, or possibly two (cant remember) of the handles, three times, all at our cost. They simply were stuck and would not turn. However, what is more of concern is that the controls will turn to the on position simply if I brush up against one of them. Oftentimes I will hear the click, click, click that alerts me that the controls have turned on but have not ignited. However, frequently, there is no click; I am just alerted to the fact the stovetop has turned on when I begin to smell gas. This seems to me to be a major safety issue. I have talked to the company, to no avail. They tell me its out of warranty and I would have had to address this issue within the first year. As these things go, I cannot remember when we first experienced the problem. I suspect I probably thought it was just a fluke at first and did not think much about it. But, regardless, I would think KitchenAid would want to assure that no one experiences a major gas leak due to their faulty equipment.

I have two pairs of the dishwasher drawers with custom wood panels and one pair started to make loud whirring noises and then would beep incessantly, resulting in us turning off the breaker switch to get it to stop. Then, the bottom drawer stopped draining and held water in the tub all the time. The repair man quoted me over $900.00 for the repair. He suggested that I not repair it, and I agreed with him. Now, my second pair is making loud noises and I am afraid it is on its way to death as well. I am so disappointed in these dishwashers. I am going to start a Facebook group to see how may others have defective dish drawers.

We did a gut rehab kitchen remodel in 2012. Consumer Reports magazine pointed us to the best refrigerator and other appliances (virtually all KitchenAid). Everything (layout, space, ice maker and filtered water) was great with the refrigerator for 3 years. In late August, 2015 we started seeing water dripping from the freezer door onto the floor. Fortunately not hardwood flooring, but wooden cabinet enclosure got a bit wet and is damaged. Bottom line - after a couple of hopeful attempts assuming it might be the ice maker or the high humidity, the problem persisted and we called the dealer for repair. I asked the tech if hes seen this problem and he honestly answered Yes, a lot. He explained that the part to fix it would be free of charge, and that I would need to pay $164 for the service call. To the dealers credit, I was told on the phone that the minimum for a service call is $164. With this fresh info from the tech whos working on the refrigerator real time, things recalibrate.... If a manufacturer has a lot of the same problem happening, the product should be recalled and owners notified. From there, repairs should be gratis. While the tech was still at the house, I googled the problem and see many youtube videos and write ups about this problem which is a small black rubber check valve that gunks up and then backs up water into the freezer. The floor of the freezer becomes a mini skating rink, and when theres no room left for water down there, it leaks out the front of the freezer. I called the dealer while the tech was still at the house and plead my case. They did call back and agreed to pick up half of the service call. They tried KitchenAid and were unsuccessful. A couple days later, I called KitchenAids large appliance customer service and they stuck to their guns. The rep gave me the usual apology said theres nothing he could do. I asked for his supervisor. I waited a few minutes and finally spoke to a woman who listened, said sorry, and then when I asked for her manager, she refused to pass me up the line saying that she was as far as I was going to take this. $82 isnt the issue. Customer service or lack thereof, and a corporate decision to let the consumers be guinea pigs to figure this wet mess out for themselves is what frosts me. I wonder how long before I have a wet floor beneath the freezer again. Consumer Reports or not, Im done with KitchenAid, its products, and its affiliated companies.

It does not clean well as it should no matter which brand or type (gel vs power vs pack) I use. Noisy. Long long cycle. I have had two kitchen aids before this and was happy. Then this house came with Maytag which did not do halfway good job cleaning. Then when it broke I chose KitchenAid. But this one seems noisier and even the cycle seems long - it may be average just seems long. The dishes do not come clean. Especially forks.

Our KitchenAid dishwasher was purchased about two and a half years ago. The model is KUDS301XSS1 for over $1000 from HH Gregg Appliances. One and a half years into its use, it had a repair for $215 for a $30 fuse. The rest was labor because nothing on the dish washer would operate. The compartments that hold the knives, forks and spoons in place are held up on the sides of the utensil tray by bread twiggies to keep them from constantly falling into the respective sections. If anyone is experiencing this problem, the twiggies have been working now for over a year. The bottom panel which is plastic is held to the metal frame with cheap plastic that breaks. It is now held on by, you guessed it, another bread twiggie. Last week, the roller on the upper rack broke off of the cheap plastic spindle that holds it to more plastic parts on the rack. Now it is engineered by an ingenious screw washer fed by a strong plastic tie through a small washer fed through the opening of the roller and twisted onto the plastic frame on the upper rack. This works as long as one doesnt force the rack open. One should note that the end stops on the rack are made up of more cheap plastic parts that are quite fragile and will probably break in time. The dishwasher does clean dishes and is silent, but the cheapness of all these parts leaves me with one opinion - KitchenAid and Whirlpool do not care about making a good appliance. The KitchenAid was a replacement for two previous Whirlpools that gave decent service. I sold appliances in the past and know that KitchenAid made by Hobart was quite a top of the line dishwasher. My advice now - not worth the purchase price, not worth buying so let buyer beware. Because of this atrocious record, the rest of the new appliances in our kitchen went to Frigidaire. I have read many other complaints from others on the internet about this fuse that keeps going out. My repairman left the instructions for replacement so I can do it myself.

KitchenAid Gas Range model KGSA906. When self-cleaning for the first time, it stopped functioning. The panel is dead and the oven is locked. The repair guy said it is a known defect with KitchenAid. KitchenAid would only respond that it is not covered under the warranty. Now, we have cleaned the oven a second time with the same result. KitchenAid is being sold as a quality product and they should stand behind their product on this clear design defect, but they are not.

KitchenAid Superba - Boiling water on the top of the gas range for pasta; the heat apparently shattered the glass pane covering the splash board. Glass flew all over the kitchen including into my arm. Beware, this product is very dangerous. Dont buy KitchenAid/Whirlpool, ever!

Mine is a gas model and I absolutely love the stovetop however with the new technology they have for these ovens. I have had issues since day one with the oven temperature not remaining consistent. If you want to bake pies or cookies that require a very even temperature it is very inconsistent.

We purchased a dishwasher, microwave, oven and refrigerator from KitchenAid about a year ago and are currently having the refrigerator repaired for the 3rd time for the SAME issue! The fan in the refrigerator (KRFF707ESS01) doesnt work properly which allows ice to form in the back. This means that the drawers dont close anymore and the fan is very loud since it is hitting the ice. KitchenAid customer service has been absolutely useless. Im very disappointed in the product quality and the company and will never purchase a KitchenAid product or any Whirlpool product ever again!

KitchenAid refrigerator model #KSCS25INSS01 failed, quit and died - This refrigerator quit working after only 5.6 years. It was the main control board. The fact that I lost some food wasnt the real issue for me. It was the response I received: We are very sorry, the control board is no longer available. The vendor that manufactures the part is no longer available, with no new supplier to manufacture the part at this time. Since we are also consumers, we understand your frustration. My only option is to send the part out and have it repaired.No response to my question about warranty and no to a new refrigerator. My issue is if KitchenAid cannot get parts, then they shouldnt be in the appliance business. So much for the warranty, its not worth the paper its written on. I only wish I would have read all of these other complaints prior to buying their products. Did this happen after Whirlpool bought them out or has it always been this bad? I have never had a problem with refrigerator, even the old secondhand ones always work. Any suggestions how to proceed? It looks to me like my experience doesnt even rate as a horror story compared to what I have read on this site.

I have a KitchenAid dishwasher that has had the digital control pad replaced at least 4 times, which is out of warranty, and is bad again. My father has a KitchenAid and has the same type of issues. I will not be purchasing another of their products again. Buyer beware.

KitchenAid kude201 - Dishwasher is 3 years old and now leaks profusely when it runs. The kitchen floor is ruined in the area of the dishwasher and the repair man told us it was a cracked housing. I understand that appliances dont last forever, but a 3 year old dishwasher that is only used in a household of 2 should not be breaking like this. I will NOT buy KitchenAid again!

Bought a kitchen high end gas double over stove and refrigerator. Thought it was best. Boy was I wrong. Was 4 years ago November, first the paint on bottom oven started to crack and peel. Call CS and was offered a 700 to go toward a new one which I paid 2500 for in the first place. Since then the top oven doesnt always work and when opening the top oven door it falls off. We are older so its not been abused. Still looks new but junk. Going to go with LG or Samsung next. I am done with anything KitchenAid. They do NOT stand by their product at all.

We purchased a KitchenAid wall oven KEBS107SSS in March 2012. This oven does not turn off and just keeps hot air blowing into the kitchen for at least an hour or longer after pushing the off button. The sales person at the high end appliance store we purchased it from said to turn off the power to the oven, which we did as it had a dedicated breaker switch. Then the oven just latched automatically, wouldnt open, and had a nice error message on the screen. Took the repairman over two weeks to get the part to fix the latch as he said that was the problem.... thats why the oven doesnt turn off efficiently??? I cant get anyone from KitchenAid to even answer my phone calls and I truly dont think the repairman has a clue as to why this oven wont turn off. Do not buy a KitchenAid oven. We are so disappointed in this appliance, but cant afford to get it replaced. Stuck with it, but it will probably completely break down in the next two to three years.

After 7 years, my built-in fridge started beeping and control panel flashing: I need a new circuit board. Would be fine except they dont make it anymore!!! For such an expensive fridge to not have parts is ridiculous. Do not buy this fridge. I am now having the part repaired and have NO fridge. Talk about archaic.

Bought a brand new refrigerator. Thought I was buying top of the line but found out I paid top dollar for a loud broken unit that even KitchenAid wont fix. Nothing but problems with the unit since I plugged it in. Between compressor, water adapter, and broken reservoir I havent been able to use a fully functioning unit for 2 years. The support offered from KitchenAid is next-to-nothing. They simply do not care that their unit does not function.

After six years it kept powering off. Used their certified repair company and after 9 service visits over four months they finally deemed it unrepairable. Countless hours wasted on the phone and waiting for repairmen. Only offered a 40% discount on a new one but had to pay in full in advance. Replacement arrived damaged after 4 weeks. No refund possible. Still waiting four weeks later and after 6 months still don’t have an operable refrigerator.

We purchased a Kitchenaid model KUDS301XBL4 dishwasher about 2 years ago. It appears that the plastic inside the tub is deteriorating and the pegs that hold the rollers for the top rack have broken. I have found this is a common complaint among Kitchenaid dishwasher owners. The parts cost for the repair is about $28 per side plus shipping costs. I did send an e-mail to Kitchenaid explaining the problem and asking them what their solution is regarding the defective parts. No reply at this time. I dont expect them to acknowledge defects or offer a solution based on other complaints I have read . So, I took to finding a solution myself.I examined the mechanism and figured out how it works and had an idea that if I could find the right nylon and stainless steel parts at my hardware store, I could re-install the rollers on a different spot on the sides of the rack. I found all the parts for the four rollers for a total of $7.89 and proceeded with installing them. I had to use a Dremel tool to cut the broken roller pegs off and sand a small plastic ridge flat. I drilled holes and assembled my parts and attached them successfully to each side of the rack (see picture). For each roller, I used a stainless steel screw, washer and lock nut along with a nylon finish washer and a nylon bushing. It works great!It is too bad that Kitchenaid wont stand behind their product, as evident in other, similar complaints. I am not an engineer, but I engineered a solution in one-hour that will last longer than the rest of the original plastic parts in the tub.

We purchased nine top-of-line KitchenAid built-in refrigerators for the premium units in a condo development. A circuit board failed on the first unit after 6 years. We replaced the circuit board (at significant expense) and the unit seemed to work fine... for awhile. Then, two more circuit boards failed in other units but this time circuit boards were not available, reportedly due to the tsunami in Japan. There was no support from KitchenAid or Standard TV & Appliance in Portland, OR - out of warranty they said. We finally found a company that rebuilt circuit boards (very expensive). One of those has since failed and we are awaiting another. Still no help from the dealer or KitchenAid. If you are buying a refrigerator, find another supplier and dealer.

We bought our Kitchen Aid oven to replace the Jenn-air that was in our house when we bought it. We have had the stove one year 3 months and it completely stopped working, in the middle of supper. I am so disappointed. Paid a good chunk of money for it. What a hunk of junk. Never again.

KitchenAid® Superba® Series EQ Built-In Dishwasher - KUDE40FXBL1 - Like many others in this column, we spent a bit more money to buy a Kitchenaid dishwasher, thinking that the quality was better. The delivery date for our dishwasher was April 26, 2011. As many have noted, the wheel system on the upper racks continues to fail. The plastic tabs that hold the wheels onto the dishwasher rack adjuster breaks, allowing the wheels to come off and ultimately leading to the upper rack dropping down on top of the dishes in the lower rack. On April 7, 2012, a few weeks shy of one year, and just before the end of the full coverage warranty, we had the dishwasher rack adjuster replaced for the first time by Sears technicians (since the machine was purchased from Sears). In January 2013, two of the four wheels were falling off again and allowing the rack to unexpectedly drop from the upper rails. After much complaining to Kitchenaid, they agreed to send replacement parts (2 dishwasher rack adjusters, one for each side, part number W10350376). The new parts are exactly the same as the two sets of dishwasher rack adjusters that failed in the past. I had hoped that Kitchenaid would have made a design change to the parts by this point in time, but it appears as though they have not addressed the issue. I will be replacing the parts by myself, and if there is no change in design, it looks like this may be an annual task. If anyone knows of a solution, kindly advise.

Purchased Kitchen Aid dishwasher model KDTM404KPS from Home Depot in Nov2020. The 1st dishwasher had a problem day 1. It was extremely loud. Like a jet plane crashing. Metal grinding weird burning smell. I called Home Depot & told them it wasn’t working. I refused repair & demanded a replacement. I then had to spend 10hrs dealing with Home Depot & Whirlpool customer service before they would agree to replace the unit. The 2nd unit had to be returned because it arrived with massive damage to the door. Huge dent. The 3rd unit was finally installed in Dec2020. However, it still makes a lot of noise. Nowhere near their 44dba rating they claim. It’s the loudest dishwasher I have ever owned. Also, the dishes come out with a white haze. They come out dirtier than when you put them in. I’m going to call customer service again. This is the worst dishwasher I have ever owned.

We remodeled our kitchen in Aug. 2018 and bought matching, higher-end KitchenAid appliances to replace all the old ones. Nine months after installation, the upper rack in the dishwasher (Model #KDTE334GPS0) collapsed due to failed spot welds on the left-side rail. The welded areas were also very rusty. Luckily, the 1-year warranty had not expired yet and we were able to get the part replaced for free. But today the same top rack rail broke again due to the same failed spot welds! The weld sites are covered with rust again, just like before. Since the dishwashers warranty has expired, we will have to order the replacement part and fix it ourselves (for $44 with shipping) or hire an appliance repairman (not cheap). Ive had much less expensive dishwashers that lasted 15 years with no problems, including rails that that never broke. I would never waste my money on an overpriced KitchenAid appliance again. Maybe they should stick to stand mixers (mine is still working after 27 years).

For the second time the transistor/computer board has malfunctioned. We bought the appliance in set 2006. After two months we had a terrible leak due to a faulty stab fitting in the water line. In Feb 2010 the transistor blew and was replaced. It happened again and now we need to get a rebuilt one, not new because of the tsunami knocking out the plant that used to make the parts. Why would I trust the part? Also they say turnaround is 48 hours, we will see. If it werent for the custom wood panels I have on the fridge, I would switch to a new brand!

Purchased the Refrigerator from HD. Within a year the Defrost cycle stop working had to call the Repair co. That was recommended by Kitchen Aid under warranty. Even with warrant still paid 150. The 8 months later same problem But now the Control board went out. Thought it was covered under the warranty but it was not. Now have to pay another $700. Be wary if you are considering buying (Model: KRMF706EBS). Already spent nearly $1000.00 in repairs and the refrigerator is only 3 yr old! Not to mention the loss of food since it took one week to get the board.

I have a kitchenaid (owned by whirlpool) refrigerator. It is a built in unit that cost almost 8k when purchased six years ago. A small electric board went out on the unit. In contacting whirlpool I was told that the board was not made any more and the only way to resolve my issue was to receive a prorated amount against the purchase of a new Whirlpool refrigerator. I was sent to a review board who got back to me within a couple weeks to relate to me I could purchase a new unit from them (I will never purchase another Whirlpool product ever again) and can get a 1,500 credit toward a new unit. So if you buy anything from these people dont expect it to last. Not only does it break but it is irreparable. Not to mention it is a racket. Think about it, they sell you an over-priced unit that to their own admission only last 6 years and then they hook you to keep buying from them. Crooks!!!

My built-in side-by-side stopped cooling almost a MONTH ago. I did call a highly rated Yelp repair company but they were honest and said that since it was still under limited warranty I should work directly with KitchenAid. Let me keep it short... Its ugly. KitchenAid is deliberately slowing down service and forcing me to work with someone who has terrible Yelp ratings. In fact I have spent $1,000 with this company and even though he claims to be able to diagnose the issues - KitchenAid tech backs him up - as of today my unit is having the same exact issue. We have replaced a heating coil that required 6 hours of labor (KitchenAid confirmed) and a compressor.I called another service company who indicated it is a simple problem that can be fixed easily. When I called KitchenAid and explained this, the customer service guy actually fought with me...refused to speak to me any further unless I gave him the phone number and name of the other company. They were so concerned that one of their authorized repair companies was questioned that they tried to intimidate me into thinking I was going to lose support. Bottom line - I asked for a supervisor and she was understanding. I begged her to send different service company but she refused.As I write this, my $12,000 refrigerator/freezer is not working, despite KitchenAid forcing me to spend $1,000 with their service person. It also still sounds like the engine from a small commercial plane, even though prior to that it was so silent. And no refrigeration still. And guess what? My service repair person will not call me back. KitchenAid is clearly trying to stall until warranty runs out. I will never buy another one of their products. To top it off, it is one of the worst customer service experiences I have ever had.

We purchased two kitchenful of appliances, one was the Pro Series. Within a few months, the enamel on the KEBS208SSS top oven began to pit and chip away. KitchenAid sent out a new oven. We were happy. We should have known that this could potentially happen again. Meanwhile, the microwave computer board went out after the warranty date and it would have cost nearly as much as a new one to fix. The hood over the range has had issues with needing replacement bulbs, only to find out that this time the fuse connector was burnt. Too bad the warranty period is over and good luck, said the KA agent.Last week, I noticed that my replacement oven was showing pitting and wearing away of enamel once again (blue enamel). The KA agent was kind enough to tell me I was probably using it wrong and that I was supposed to clean up the large spills before running the cleaning cycle. I might add that a piece of the foil I used to line the rack for the large spills fell to the bottom of the oven and is now permanently attached to the enamel. I have not used the cleaning cycle in fear it will cause more damage. Again, the agent told us theres nothing KA can do and maybe search for an enamel repair kit and good luck with getting it resolved. I am shocked by KAs attitude and lack of support.

We’ve had our Kitchenaid dishwasher for 5 years. We’ve had to replace many parts (all 4 wheel assemblies on the bottom rack, another part of the top rack (upper dishwasher height adjustment). The parts are plastic, and are poor quality. Look for a better model or brand that uses metal parts. The dishwasher cost around $900, and we’ve spent $250 on replacement parts.

Purchased my KitchenAid dishwasher 12/2013. Replaced the door latch/strike plate after owning it for 4 months. 12 months later, I replaced the door latch/strike plate again. Door continues to latch incorrectly. Manufacturer defect.

Would highly recommend. Love this dishwasher! My daughters dishwasher has a brand that doesnt come close to a KitchenAid and more expensive than mine. Go check and buy on feedback. It will definitely make a difference in the long run.

I have a refrigerator/bottom freezer. 3 years old and the control board goes out. The authorized dealer has a very bad reputation of causing more issues than actually fixing anything so I went with a reputable repair company... since I didn’t go with the sub-standard company the company wouldn’t stand behind the product even though the company I went with is trained in repairing KitchenAid. From what I understand to be an authorized dealer is up for grabs. The highest bidder gets the authorization. Has nothing to do with their credentials. My entire kitchen is KitchenAid... not any more! This repair should have been covered.

Our 7 year old KitchenAid Kss42QMSO1 side by side started chirping, the internal control panel lights were flashing and we could not adjust or control the temperature using the buttons. I first called the Kitchen Aid HELP LINE (that is an oxymoron). Talking to the fridge would have been just as helpful and all they were interested in doing was dispatching a service man, when he showed up we were advised that it was the control board # W 10219463 that had failed. When I asked the cost to replace it he advised that it was no longer available because the factory in Japan had been destroyed by the Tsunami. This was two years ago, and this huge company had done nothing to create a new supply?? Can you imagine Toyota or Sony using that excuse? Our only option was to send the control board to Chicago for repair and have the fridge / freezer out of commission for 3 to 4 weeks, also we had to sign some kind of a liability waiver. I thanked the service man and advised I would get back to him, then I started to surf the net and after some time I came across this web site and thankfully the blog from Chris in North Van. I live in White Rock and if I knew your address I would drop off a very good bottle of wine on my way to Whistler. Thank you, after reading your info I asked the service man to come back and remove the board. However he said he was prevented by Whirlpool / Kitchen Aid from doing this unless it was sent to Chicago. I contacted another excellent service man who is independent and had him do the removal. I would say unless you are very mechanical you would be better to go this route. He also advised that it was often the evaporator fan that caused the circuit board malfunction. Once it was removed I found it to be exactly as per the photo from Chris. I was able to locate the capacitor from SMI Industrial Electronics in the nearby suburb of Langley, it is a 22ouf 10X12 HI TEMP CAPACITOR 85 o and cost the princely sum of 36 cents (I even purchased a spare). I then took this to an electronics repair man who tested and removed the defective capacitor and installed the new one in less than 5 minutes, he would not even accept any payment. I would advise that unless you are used to working on circuit boards and have a very fine tipped soldering iron I would use an expert, even if he charges you. It would be easy to short out the wires with too much solder. I took this home and the service man came back and installed the circuit board and a new evaporator fan which for some reason is a stock item and in about 1/2 hour the fridge was humming, no chirping and we were able to set the freezer for 0 F and the fridge for 37 F. The temperatures both initially read the 70 F air temp. but started to fall quickly and a few hours later we heard the first ice being made and everything is working just fine. Our total bill including the fan was $260.00. Thanks again Chris, and like you I am amazed that the so-called help line would not advise of this. I am fairly certain our first service man knew of this option because when I told him about the info from Chris he was not the least bit surprised. He probably would be blacklisted if he went against the companys policies. Good Luck!

I purchased a KitchenAid refrigerator in Sept 2014 for nearly $3000. On Oct 1, 2015 the refrigerator was warm resulting in loss of most of the food. I called my authorized dealer, Poirier Sales of Norwood MA, where I purchased the fridge and requested service that day. They came out and charged me $169 house call and found that the SEALED waterline was blocked which resulted in the fan freezing up and had stopped working. The fridge was 1 year 2 weeks old! I called KitchenAid and they REFUSED to pay the house call charge of $169. Why is shoddy workmanship the norm? I will NEVER buy a KitchenAid product again.

We bought a new house in February 2007, and a few months later, we came back from vacation and we had mushrooms growing out our baseboards behind the dishwasher. We called the builder and they came out to take a look. The dishwasher had faulty pump that was leaking. The builder replaced the whole washer, carpet, and baseboards. Now, the pump went out and KitchenAid says it is two months out of warranty and cant help and that I have to shell out $400 to fix the pump. KitchenAid does not stand by their products. You shouldnt have to deal with that many problems with a dishwasher (model kudp02frss3) in the first 5 years.

While at my parents house they described a plastic odor from their Kitchen Aid Convection oven when the oven is used (all electric). I turned the power off inspected the connections on the outlet for the oven and also the connections to the oven itself. All are tight and no signs of heating up etc. I plugged everything back in and we turned it on, nothing at first but after about 3-5 minutes you could smell an odor from the upper portion of the unit. Again turned everything off, opened up the back panel and there it was, the oven control board had a larger connector which feeds power to the oven elements and it was melted to the board. I removed the board for replacement. A local company near us (Servall) had a heck of a time finding this part and the connector as well, the board is manufactured by Eletrolux but is in the Kitchen Aid. As of now, the cooktop just works but no displays since the oven control board also controls the displays. I am a master electrician with in-depth knowledge of controls, there has to be something wrong with the board from Electrolux which has been causing all the headaches for all these customers. I am not sure if the self cleaning function has been used but will recommend that it not be used unless someone is there and they want a possible fire. What a shame and shame on Kitchen Aid for not doing something for all these people who have paid in excess of $1000.00 for a heater. Buy another brand and let other know about it as well, Electrolux is a large company or brand that is well known in Europe for its quality, too bad Kitchen Aid botched this one up. Someone needs to step up to the plate make it right before someone gets hurt. You can fix a house but not a life.

I have had issues with this dishwasher since the beginning. The dishwasher racks are set up poorly and the mechanisms that hold the racks and allow them to slide in and out break often. A service repairman is the one who recommended I get a Kitchen Aid dishwasher and I am now wondering if he does this so that he gets more business. I have read other complaints since googling after having this problem and it appears to be pervasive. Kitchen Aid needs to recall these racks and offer a replacement of a newly-designed rack system. The dishwasher is 3 years old and this is the second time I have had a repairman out in the last 3 months not to mention that it has never operated well.

This is a good looking, rather expensive refrigerator. It has a very well styled and functional interior; more room than I anticipated and much easier to store things neatly in freezer than my last side by side. The major disappointment is the drawers in the refrigerator part. They are so flimsy that they came apart and had to be taken out and put back together after using a short time. This was extremely disappointing since the rest of this appliance is sturdy, well thought out and beautifully styled. What were they thinking? I am very careful dealing with opening and closing filled drawers so they dont come apart again. I would certainly make checking out how well the drawers were made a priority when buying a new refrigerator. Something I would never have thought of before.

Refrigerator model KRSC700HPS just over 1 year old. Has been icing up inside the freezer and refrigerator causing air blockage so temp of refrigeration at 60 degrees. Told by repair service that they first need to replace thermostat and fan units. Then if ice repeats have to replace the control unit. All parts on backorder so have to do without the refrigerator for who knows how long. Repairman said even a replaced control unit may not fix the problem. Over $2,300 loss. Just learned that there is a class action lawsuit against Whirlpool regarding this problem with defective Control Units causing ice build-up in many of their different branded refrigerators.

My last Kitchen Aid refrigerator lasted about 10 years before I finally gave in and bought a new one. It froze food items stored near the back of the refrigerator. I was not going to buy another Kitchen Aid product, but the consumer report reviews led me to believe that people were happy with the product and I got suckered in. Biggest mistake EVER.I had only had it for six months and began having problems with the freezer section. Repair person came out and fixed it. Then the food started freezing in the refrigerator section. Repair man came out and changed a part and it actually worked well for several months. Now everything is freezing and this is a very expensive issue because you have to buy all new fruits and vegetables and other products that have been destroyed by the freeze. This unit is only a couple of years old and has been nothing but problems. I went online and there are people who have solutions, but they are not things a woman can easily do. Repairs are expensive. And this is a new appliance!The company should be accountable for their products. This is so incredibly frustrating and has cost me so much money. I will never buy a a Kitchen Aid product again and am letting everyone I know through social media not to do so as well. I am trying one more avenue with this company and then will take other action.

This is the 4th failure of my KitchenAid dishwasher in six years. Three leaks and one failure to fill with water. Because it is out of warranty, management does not feel responsible. I believe I got a lemon and all that keeps going wrong is not my fault. Very disappointing!

BUYER BEWARE...DO NOT BUY KITCHENAID. I have read the comments made by many people regarding the refrigerators but I have another issue with KitchenAid/Whirlpool. The Plate on the bottom of my electric oven states that the Country of Origin is Canada..I provided the appliance pamphlet and layout information to my service repairman and he noted that that pamphlet said that only US-made models have a fuse so after his inspection determined that the reason the oven was not working was because of the Circuit Board and subsequently ordered. When the part was received and put in, the oven still did not work. The repairman did another detailed inspection and found a fuse and it was blown. The pamphlet specifically states that only US models have a fuse. I will take this matter further to determine what agency regulates mislabeling of Country of Origin. With all the deception detailed by the many complaints by homeowners, there must be a reason why KitchenAid/Whirlpool mislabels the electric ovens and I suspect mislabeling may give some sort of money advantage. In addition, as most of the complaints state, KitchenAid customer service is horrible and when I furnished them with supporting documentation, they would not even try to justify why the Country of Origin was misrepresented or direct me to anyone that could address the problem. The age-old adage, keep on stalling and the complainant will probably give up and go away. If not for the mislabeling, the repair cost me $600 instead of $2 to replace the fuse.

Ordered a KitchenAid refrigerator KRM706ESS01 just over a month ago. The refrigerator stopped working on Sunday the 20th and did not see a technician until the 23rd. The technician came to the house and told us we needed a part to repair which will not be delivered until the 31st and who knows when the technician will conveniently show up. Now we are out $1000 of Thanksgiving food for 18 people at my house and KitchenAid/Whirlpool offered $100 for the inconvenience, right!! I spent over 2 hours on hold waiting to talk to someone who could actually do something and when I finally was able to speak to someone they were of no help (Tim #**). Looks as though we will be out of a refrigerator for the foreseeable future. I will never buy a KitchenAid product again and will do everything in my power to spread the word of a terrible product/customer service.

4 months after I bought my 3000.00 KitchenAid refrigerator. It stop cooling. I also noticed the cheese and butter drawer wouldnt close all the way, I also purchased a extended warranty so I called Sears. They sent out a repair person. He told me he would return when I took everything out of my fridge and freezer, so I did. He returned a couple days later. He looked at it for about 10 minutes and said he had to order some parts. 3 months later he returns after the parts arrived at my house, he shows up opens the doors of the fridge started taking it apart, broke one of my shelving slides in the process then I see him cut a 3 or 4 wire plug off and said, Oh you dont need that, so to remind you the ice block is completely melted by now. He said these Kitchenaid refrigerators all freeze up so when hes done he leaves 2 months later the same problem. I thawed out the ice block again then worked fine for 2 months then again in 2 months the same and thats my life with this garbage Refrigerator! DONT EVER BUY A KITCHENAID REFRIGERATOR! EVER EVER EVER!

I have read some of the complaints written about the KItchenAid refrigerators to see if we can finally come to a resolve about our problem too. We actually have the same problem as the person who posted on October 27th, 2012 in that the refrigerator is not cooling. We have a Side-by-Side (water/ice on door) model#: KSRG22FTSS01. Today, Oct 29th, I have made a service call and this will be the 5th time they are coming to my house. We have replaced some parts and have spent a small fortune on dry ice, not to mention, having to throw away a lot of food. Does anyone have an idea of how to really solve this issue?

Mergers Fail Consumers - We purchased Kitchenaid and Maytag appliances when we remodeled in 1996. Those originals are now approaching 20 years of excellent service but wearing out. Every one of the new Kitchenaid appliances has proven to be a complete joke. After a little research we are now starting to understand what happened and who is responsible.

In the past 8 year I have built 2 new homes on the upscale side of the housing market. In both situations I used higher appliances from KitchenAid. For the investment made, I am very dissatisfied with quality of the produce drawers. On both drawers, the chrome deco on the drawer handle has come loose dueto faulty adhesive and both drawers have cracked in the center of the drawer handles. This is something I would expect from a 300.00 refrigerator, not one over 2000 dollars @ builders cost. In addition, I had the ice maker replaced in 6 months due to a faulty board, which is something you as manufacturers are aware of, but failed to advise the consumer. We have replaced the ice maker board and now will address replacing both produce drawers. I must say that after less than one year of ownership and facing the fact that all the other series of appliances are also KitchenAid products, I am waiting for the next problem to occur. I come from a family of builders, both residential and commercial and intend to advise them to consider other upscale appliance manufacturers on future projects. If this letter never goes up the management ladder I am sure I will receive the same reply as my last e-mail, indicating that your Customer Service Department also needs repair. Being an owner of several national companies myself, I am very aware of the damage that can be done by not reacting to a problem, where consumers are involved. Thank you.

We have owned this unit for over ten years and never had a problem. The capacity was perfect to our needs and ease of use. Also, the adjustable shelves allow us to change compartment size to fit larger items.

Our KitchenAid Double Oven has had consistently horrible problems with both upper and lower door hinges for the last 10 years. Thank God we opted for an extended appliance warranty because after every holiday with lots of use, we need to have the hinges replaced on one or both oven doors. Our KitchenAid stainless steel 5 burner built-in cooktop with Downdraft Vent has also needed replacement four times in the last 10 years and has been repaired five times in between the replacements due to the burners failure to light, or the burning of the bottom of our pots and pans due to burner malfunctions needing the burners to be removed and replaced.

We purchased a complete kitchen of KitchenAid products. The quality has been very poor. The name at one time inferred quality. In two years the refrigerator was replaced once and the second has failed. The refrigerator temperature controls dont seem to change anything. The Dishwasher has been repaired three times. The stove has very poor insulation, but does a good job of heating the kitchen. In summary, I hope your experience has been different. Lowes has made every effort to to do a good job, but they simply have very little to work with with their KitchenAid appliance brand. I suggest you read the other reviews and make a wise decision. We made a very poor $6,000 decision.

Side by Side KSC24C8EYY01 - We put in a new counter depth KitchenAid refrigerator 3 1/2 years ago. The freezer recently stopped working for no apparent reason, then kicked back on after 24-36 hours. This has happened 4 times in less than 3 weeks. By the time the service man gets here to check it out, the freezer is back to working, and he cant find a problem. The 2nd time he called Whirlpool and went through an entire diagnostic testing and still found nothing. He thought the Whirlpool technician that he spoke to was not too bright, and actually rather rude and indifferent. The only recommendation they had was to replace the mother board for a cost of $800 - with no guarantee that replacing it will solve the problem - it was just a guess. The service man told us that he wouldnt buy a KitchenAid appliance for anything - their service department was difficult to work with and trying to get parts needed for repair can be a nightmare. We will NOT be repairing this refrigerator and we will NOT EVER purchase another Whirlpool appliance - EVER.

Very well made microwave. Love that it matches the other appliances. It has so many features! From melting butter to baking a pizza on the pan that is included with the microwave. No problems as of yet in the 3 years we have had the microwave. It is stainless steel and looks pretty. The only slight improvement I would make, is it would be nice to have a flatter looking front. It reminds me of a spaceship with the way it bows out from the door front. But I do like that underneath it is angled up towards the front, so it allows for more working space on the stove top that it sits over. Over all I am really pleased with the purchase.

Have had my kitchenaid stove since 1992. Performance has been great. I would hate to have to replace it, but the paint on the trim is peeling, and it is showing its age. Would like to touch it up but have no clue as how to do it.

11-7-2012 Purchased. 5-2-2013 circuit board fails. Two home visits by service, replaced board, no cost. 12-25-2013 - Major Flood during between Christmas dinner for 12 and dessert (we were in dining room, not in the kitchen). Hose blew off, pump system screwed up. Two home visits by service. No dishwasher until after the holidays. KitchenAid did cover the cost of the new pump but did NOT cover labor. Since they only provide a 360 day warranty and we were 48 days over.

Remodeled kitchen and purchased 4 kitchen aid appliances - thinking they were of great quality and would last. Had nothing but problems since purchased shortly after purchased. Had problem with microwave door problems with fridge - ice maker. Problem with oven when self-clean - shuts down and cant open door. Had fixed 2x -this is the 3rd time! Dishwasher fixed more than once - refused to get fixed again and pay over $300 - can buy a new one.I currently have an ice maker, dishwasher and oven that does not work. Raising 4 children, I am VERY dissatisfied with Orvilles where I purchased the appliances and ESPECIALLY KitchenAid - that doesnt back up the products they manufacture with defects. I will NEVER purchase anything KitchenAid EVER again or shop at Orvilles. I have paid so many service charges and part bills. I refuse to give them any more money!

Second visit already by tech. Said it needs new motherboard for 4 year-old fridge (never had problem with old fridge!). Had to throw at least $100 worth of food. Got new motherboard, STILL NOT COOLING. Now fridge SMELLS. Im getting sick and tired of this stuff. Did I buy a piece of crap? Oh, BTW, tech said the motherboard comes with a 90-DAY WARRANTY!! Who are they kidding? 90 ** days!!!

The electronic control for the fan failed. Called a repair tech to fix. Was told that we needed part # W10219463 which showed a cost of 220.00 in his system. Told him to order part. Got a call later that part is no longer made by manufacturer and that we needed to call KitchenAid. KitchenAid told us to call a appliance parts company that they recommended. Quote from them was 805.00 and they had one in stock. When you add that to the cost to install the part with a repairman I am better off buying a new fridge from a manufacturer that has affordable parts.

Horrible French door fridge model KBFS20EVMS. We have had many problems since we bought this less than six years ago. The refrigerator portion is set on 44 and still freezes the food. The icemaker stopped working. The fridge leaks. Ive had that cosmetic rust issue on the exterior. The seals are shot and I cleaned mold/mildew from the rubber seals. Avoid KitchenAid products.

I bought a Kitchenaid microwave/convection oven 3 years ago. Kept saying handle is not closed. Then stopped working altogether. What really made me mad is that when you call customer service, you cant get anyone. I have been disconnected while waiting for a representative. Not sure why they have a positive reputation.

On March 25th 2015, our carbon monoxide detector went off. The local fire department came and they determined that the source of the carbon monoxide leak was our Kitchen Aid slide in range-oven. They supplied a report that outlined this. They shut off the propane supply and pulled range out of position and said we could not use this appliance until problem was fixed. We notified Kitchen Aid customer service on 03/26/15 (appliance under mfg warranty), and explained the situation. This issue was passed on to their safety department. The safety department did not respond to us until 03/27, and they explained that they needed a carbon monoxide meter to service our appliance, which they did not have available. We have been in contact with them every day since the incident happened, and we still do not have an appointment from service department to resolve our issue. The excuse everyday is that they are waiting for carbon monoxide meter to come back to them from the field to send to our local appliance repair center, and in turn to come to our home. This is not acceptable, and we need to help, now, to resolve this issue.

We built a new home three years ago and installed all KitchenAid appliances. The refrigerator has been a lemon. KitchenAid has not been helpful in dealing with repairs. We have repaired the ice maker four times and finally it was replaced. Most recently the refrigeration system has developed a leak and is not cooling. We were informed that the retail cost of the repair is $3000. If we had not built in the refrigerator and purchased cabinet fronts for the doors we would have replaced this appliance.

The KitchenAid Double Oven KODE500ESS is advertised as an Even Heat True Convection with Even Heat Preheat. The machine is attractive with its huge viewing windows, its highly polished finish, its commercial style handles, and blue enamel interiors. The electronics are elaborate. You are able to adjust almost every function of the oven should you wish to so, down to alarm sound loudness, and calibrating the oven without a technician nearby.However, this oven is not without fundamental flaws. The engineering is deficient in crucial areas: the temperature sensors are located near the top broiler unit, a unit which is used in the preheat cycle resulting in unreliable preheat readings; the heat release vent is located at the top near the electronics components, which could be affected by the extreme temperatures, such as those used in the cleaning cycle, ultimately causing an oven computer crash.We chose this oven based on the many positive reviews and have had the oven for 6 months. Even after talking with KitchenAid representatives and two repairmen, we have yet to feel comfortable with the ovens ability to function properly. First, the preheat operation is worthless due to the location of the sensor. When the preheated indicator sounds after 8-10 minutes, the oven is probably 20-30 minutes away from the achieving the desired heat, should it ever be attained. Second, the highly emphasized Even Heat claim is questionable. Once attained, the temperature can, by design, fluctuate. This we understand and have no problem with fluctuations, unless the variations are large. We have experienced 50-degree swings. We have agonized with uneven cooking in many directions: dishes done on the sides, unfinished in the middle; dishes browned on one corner, not on the others; when two dishes in same oven baked at same temperature, both requiring same number of minutes, one will be done before the other. The repairmen state there is nothing they can do to fix these problems.This is not a bakers oven. It is not even a novice’s oven. It certainly is not as functional as our previous ones. It is unreliable, untrustworthy and we wish this one were not ours. If KitchenAid planned to put an extremely inferior product on the market prematurely at an exorbitant price, they have exceeded their expectations.

Very quiet and cleans dishes very well and dries them very well. It has stainless steel inside for quieter operation. The utensil rack is handy removable and and extra top rack is great for putting flat objects on. The top rack for cups and glasses is adjustable.

The light in the oven of our 8 year old kitchenaid superba stove doesnt light up anymore. Apparently we have to change the whole board? Total loss of function for the oven and the visible control area (lights, timer, programs) resulted.The cost of a new board in Canada is close to $500 + installation so it is not worth repairing. Kitchenaid offers no assistance in this matter. The stove cost us $2500. We thought we were buying the best but were we ever wrong.Fridge door bottom hinge is sinking in the door, the door is basically just foam there is. No support to hold the weight, very bad design. I called Kitchen aid and all they want to do is to sell us another door for $800. Believe me, they will never sell me anything ever again, they are far from being the best.

KitchenAid fridge model #: KFIV29KPMS03, S/N K43117611. Delivered: 9-16-14. Price: $3,038.00, including $ 199.99 for five year warranty. Issue: Defective freezer seal causes frost ice accumulation, see photo, below. 1st warranty call to KitchenAid 10-22-14 recd appointment for 10-27-14. Repair tech made a few adjustments. 2nd warranty call 11-12-14 recd appointment on 11-14-14. Repair tech said the seal looked good and, based on his experience, the factory fix was to put silicon sealant on the fridge to seal any seams or gaps. He was correct.My position: I expressed to the repair tech and to the factory trouble call reps that silicon sealant is not a permanent fix. The freezer seals installation, or seal design, or seal installation, or structure alignment, or something else was defective and that I was not in favor of applying silicon sealant to fix a manufacture defect. I also called RC Willey, the place of purchase and where I also purchased a five year warranty and expressed my issues. They deferred to the factory. If silicon sealant fixes this defect, why dont the display/floor models have it on them?Photo 11-14-14. Can anything be done to force KitchenAid to replace this obviously defective product?

KitchenAid double gas range (model KGRS505XSS01) burner failed on arrival; knob failed after six months, not covered by warranty. (We tried to force the knob and bent the pin.) That cost $185. Another knob failed one month after warranty ran out. Estimate for same repair is $230. Stainless steel surface is stained, scratched, and discolored. I had trouble on the phone with Sears service company, A&E Services. I was on hold for an extended time as they were having technical difficulty, and eventually I got cut off. Parts available from Sears and from Whirlpool for $59 vs. $80 quoted by A&E Services.

My 5000 dollar and only 4 year old fridge stopped working. KitchenAid is telling me it is not repairable and they are not doing anything about it. They are saying the 10 year warranty does not cover the broken part. Major appliance should last for longer than 4 years!!!

I would love to share my experience with my new KitchenAid refrigerator, however it appears at Whirlpool who makes KitchenAid refrigerators is not up to the task of manufacturing it and getting it shipped!!! How can one have faith in a company that cannot manage its supply chain? I ordered this refrigerator from a major appliance retailer on the East Coast, Karls appliance on the 5th of June 2020. Its delivery date has been postponed three times already with no firm commitment as to when the product will ship. I made the mistake of continually waiting thinking Ive invested this much time already I might as well wait for it to arrive. This turned out to be an ill-advised strategy. KitchenAid refrigerators are simply not shipping.Had I ordered a Bosch, or GE or any of a number of brands not manufactured by Whirlpool, I would have had my refrigerator for months. If you are prepared to put your trust in a company that cannot honor its commitment dates, then Whirlpool/KitchenAid maybe a viable option for you. For me however this incompetence in handling supply chain management is a deal-breaker! I will not likely ever purchase a Whirlpool/KitchenAid product again.

We built a new house in 2012 and bought all new KitchenAid appliances. I thought I was buying a great branded product. My natural behavior is to buy the best and when I went in to buy appliances for my new house, I was directed to KitchenAid. I started my experience by having several problems with our microwave and with my cooktop at one time, with the burners not working correctly. I also had the board on our dishwasher go out. However, my fridge is a nightmare. I started having a problem 4 months into my purchase. I bought a French door fridge, and my kids do not always pay attention to how the door closes so once in a while, it stays slightly cracked open. KitchenAid tells me I need to train my 2, 5 and 8 year old kids to check the fridge door. Do you think kids will remember this all the time? The problem is that the beeper does not let you know if someone left it open until after 5 minutes. The other problem is the sound on the beeper. I can hardly hear it, and there is no adjustment for higher volume there either.I can hardly blame kids or teach kids that are 2, 5 and 8 years old to shut a door and check it. I can tell you that I know I bought the most highly priced fridge on the market and a simple timer and beeper on the thing is not adjustable. I cant even get an upgrade to fix my problem. I offered to pay for the fix and nobody can help. I am asking for a louder beeper and a timer for an alarm, and nobody can help. More functionality is what the consumer is asking for. Supposedly, we buy the highest priced item on the market so that we would get more support, or at least an option to add this to your fridge? I would have expected this from cheaper models, but a KitchenAid, as far as what I have been told, is the best. Well, I got room for argument on that one. I went to Sears today and LG and Samsung have adjustable timers and adjustable sound within their appliances. My plan is to buy one and never own a Whirlpool, Kenmore, or KitchenAid ever again because I absolutely cannot get a response from this leadership team within the Whirlpool organization.This is the 6th time since I have owned this fridge that this has happened. I figured, to replace all the food in my fridge, it would cost me $60-$100 each time. At this rate, it is too costly, with your cost of the product and the way it is engineered to afford your products from this point forward. I am not happy about the communication I have gotten from KitchenAid and Whirlpool to address my problem. I am not happy about supposedly purchasing the best brand on the market and not having more flexibility to adjust timers and beepers.I am not happy about having to replace my fridge in my new home 18 months after purchase. I am not happy because I will have to try and match stainless colors on the new Samsung or LG brand product I intend on buying. I am not happy about not being able to match all my appliances in my new home because KitchenAid can’t offer a product with adjustable timers and beepers. I am only one customer, and I never bad mouth anyone’s products. But if someone asks about my new KitchenAid products, I will let them know my experience with customer support and product experiences I had from the Whirlpool umbrella.

My control panel had to be replaced because the oven temp was off by sixty degrees. That was in November. However, it didnt repair everything because I can no longer turn the oven on. I have been told its the touch pad. The service company ordered the part and KitchenAid said it is backordered until at least the end of February. I have been without an oven since early December! I have a family and I am an avid baker. No oven for three months? In addition, all the apartments in our complex have this oven and one by one, the problems are the same. What can I do?

I purchased the KitchenAid Gas/Convection Range with AquaLift Self-Cleaning Technology. To put it simply - it does not work. It requires you to pour 1 3/4 filtered water on to the bottom of the range after you remove all racks. Click clean button and poof, in 40 minutes your oven is clean...NOT! I am not a cook. I purchased this oven almost 2 years ago. Ive used it less than 10 times. Mostly for holiday dinners. It just is not that dirty. Tried the self-cleaning feature twice. No difference. It just does not work. I am currently also questioning whether the oven is really working well at all. It takes forever to preheat and lately, more time than usual to cook food. I called customer service as I purchased an extended warranty. They wont come out until I troubleshoot all issues. Their recommendation was to unplug the oven and wait 30 minutes before plugging it back in - to reset the oven. Try cooking something and see if that solves the problem. Havent done that yet at the time of this review, however, I think this is an oven I would avoid purchasing. I know Im going to have to end up scrubbing the inside myself and be forced to use the recommended cleaners and tools or risk forfeiting the warranty. It is a great looking oven. It was recommended to me when I was looking to purchase all new kitchen appliances after a total kitchen reno. I just have a bad feeling about this appliance. Cant imagine what others with families and those that use this oven often are going through regarding the ability to clean it. This AquaLift, low-heat technology DOES NOT WORK.

We purchased a KUDE40FXWH dishwasher in March of 2011. The top rack glides kept popping open letting the rack fall off. This probably was linked to binding due to breakage of the plastic pins that connect the glide wheels on the glide bracket. Three months out of warranty, the wheels on one side fall into the bottom of the dishwasher. Both sides have now been replaced for $250. The service technician said this is not isolated and they encounter this on these models. We called Whirlpool/KitchenAid and they politely noted the problems. But once they had the information, they made it very clear that they are unwilling to supply anything at their cost to correct our problem with their equipment. They are glad to have the info for engineering future equipment but are calculatingly unmoved about the predicaments of people who have bought their products to date. We paid for a higher end dishwasher to get reliability and service. KitchenAid is not worth the premium. I could just as well have bought a bargain brand and the repairs wouldnt have been any more than the glitzy one.

All the inside drawers are cheap plastic and the front piece broke after a year. It’s over 100 bucks per drawer to replace and you have to replace the whole piece. All the appliances I have even the dishwasher rack broke. Too expensive to buy and doesn’t last.

I have a 6-year-old Stoves dual fuel range cooker. Sure, its out of warranty, but now it only functions as a hob! The thermostat on the main oven failed last year. Stoves cant fix it because the company that made it has gone out of business (no thought of doing anything about it). Now the interior glass shielding on the secondary oven decided to shatter last night. I cant expect anything to last, but in these times, I expect that something would be fixable. I will never buy anything by Stoves again. It was an expensive item around $1500, so not exactly bottom of the range! But it definitely is bottom of all ranges!

Our double oven KEBS207DBL8 is approximately 10 years old, and we have had nothing but problems with it. The electronic touch control pad has gone out on it, in its fourth year. The upper cooling fan has been replaced, the front door has been replaced, and currently, it sounds like a diesel truck idling when the unit is turned on. Our Kitchenaid appliance is not the quality product we expected when purchased, and we will certainly avoid all Kitchenaid products from here forward.

Our 5 year old Kitchen Aid dishwashers door broke. Now, the door drops open with a resounding crash and if your leg is in the way, too bad. Also, the soap dispenser doesnt work. We bought all Kitchen Aid appliances when we built our house. The dishwasher is not good. The refrigerator and convection ovens have not been a problem. You really have a quality problem with the dishwasher.

I purchased a new KitchenAid Superba EQ Series 24 dishwasher model KUDE40FXBL4 from Sears.com on November 21, 2011. The appliance was delivered and installed on December 5, 2011. In May of 2012, the dishwasher stopped mid-cycle and would not drain the water from the tub. The control panel was totally non-functional. On May 18, 2012, a factory authorized repairman from A&E Factory Service attempted to repair the dishwasher by replacing a bi-metal fuse. The dishwasher functioned until June when the same repairman returned on June 1, 2012 because the dishwasher had again stopped mid-cycle, would not drain water and the control panel was non-functioning. At this time, the repairman installed a controller and fuse. I told the repairman I was very concerned that the dishwasher had to be repaired twice within a two-week timeframe. I also mentioned the fact that the dishwasher possibly could be defective and that I did not want an appliance that needs constant servicing. The repairman assured me that KitchenAid would replace the dishwasher if it continued to break down.Yesterday, December 6, 2012, one year and one day after the initial installation of the dishwasher, the dishwasher again shut down mid-cycle. I spent over an hour on the telephone attempting to get a satisfactory resolution from KitchenAid and/or Sears. I was not satisfied with anything KitchenAid or Sears offered. Their basic answer was that I should have the appliance repaired and buy an extended warranty. My answer to that is why throw good money after bad? All that accomplishes is to make the purchase price of a defective product cost even more. If after two service calls during the first six months of use KitchenAid factory service has not been able to accomplish a complete and total repair of the dishwasher so that it does not breakdown every six months, then purchasing an extended warranty will not fix the defective product.I was a loyal customer of KitchenAid products prior to this bad experience. I had a wonderful KitchenAid dishwasher prior to purchasing this defective model, but the wire baskets needed replacing and were so expensive. I thought it wiser to invest in a new dishwasher than to put new baskets in a 10-year old dishwasher. I now realize what a foolish decision that was. That dishwasher is still functioning perfectly in someone elses home while I am facing the possibility of dealing with a defective appliance that will require servicing every six months or replacing. Either way, I lose. It is my educated opinion that KitchenAid should replace the defective appliance and recall that model.To the reasoning mind, the thought occurs that these breakdowns are a built in ploy to sell extended warranties and thus keep the parts and service departments also in business. While this practice of planned breakdowns may appear to be a revenue generator equal to or greater than planned obsolescence, it may prove detrimental in the long run. As a particular and wise consumer, I will find another manufacturer of a longer durability and better quality product or just give up the dishwasher all together. The consumer does have other options. At any rate, I refuse to be forced into paying additional funds for a dishwasher that is not functioning up to the original expectation of the purchase price of $1,377.01, which is an overcharge for a product that only works for six months at a time.

I purchased a new refrigerator (KitchenAid refrigerator kfs25xvms9) that throws ice everywhere. I had a repairman come to look at it and I was told to use a bigger glass. If I go to something bigger, then I will be using a bowl. This has been embarrassing because I have to tell everyone who comes to the house to Stop! Let me get a bowl or the ice will end up on the floor! I have all new appliances and I was told what I was buying was good stuff but I have to use a bowl to get ice. My question is, why have they not recalled the plastic piece that is supposed to put the ice in the glass? If I had been able to try it out in the store, I certainly would not have bought this model. I really hope that Whirlpool will stand behind what they sell and recall this plastic piece and replace it with one that will do the job. If I do not receive some satisfaction on this matter, then I will contact the Better Business Bureau.

I bought all Kitchen Aid appliances in 2012. The dishwasher heat dry button has never lit up and the dishes have always come out still wet. I do not have a warranty and warranty. I was quoted $350 to repair the circuit board.... my dishwasher is a little over 1 year old.... I phone Kitchen Aid and they said no recall. When I look online I see the same complaints over and over about this dishwasher. Kitchen Aid needs to make this a recall and fix this lemon of a dishwasher!!! I WILL NEVER BUY KITCHEN AID AGAIN - THEY DONT CARE ABOUT THE CONSUMER.

Remodeled our kitchen 7 years ago and got my dream refrigerator. Worked fine until 3 months ago when we noticed it was almost constantly running. Called Whirlpool for warranty repair. Finds out only needs small part but it is encapsulated and no one makes the board it is on, so it cannot be repaired. $2500 for 7 years is not in my budget. The warranty gave us less than half our cost. It looks like all the other refrigerators are just as poorly made. I loved my refrigerator. Why cant they make parts for their appliances?

This refrigerator works ok, but there are some issues. Both doors have to be opened in order to get the crispers open. That is kind of a hassle. Also the left door never seems to close fully. It keeps popping open and setting off the alarm.