As the expression goes, the kitchen is the heart of the home. And with prideful purpose and beauty that beckons one to draw nearer, AGA is the heart of the kitchen.

Dishwasher Repair

For the home, kitchen and beyond, AGA manufactures appliances that homeowners have come to trust. Even a trustworthy appliance requires occasional maintenance or repair, however. If you’re in need of AGA appliance repair from experienced professionals, your local Appliance Helper can help.

Dishwasher Will Not Start? 
Check if door latch is closed completely. 
No cycle selected, select proper cycle. 
Check if power cord is properly connected. 
Check if water supply valve is opened. 
The control panel is locked, dissable the control lock. 
A circuit breaker is open, if so reset the circuit breaker. 

Food Particles Remaining on Dishes (Dishwasher Not Cleaning Well)? 
You selected an inappropriate cycle. Select a cycle according to the number and soil level of the dishes. 
Wrong cycle selected. Select appropriate cycle according to number and soil level of dishes, see manual. 
Water temperature is low. Connect water supply line to hot water supply. For best performance, temperature of supplied water should be 49˚C (120˚F). 

Dishwasher Leaves Glasses with a Cloudy Surface? 
Water supplied was too soft and/or too much detergent was used. Use less glasses and add a liquid rinse aid. 

Dishwasher Does Not Dry Dishes Well? 
No rinse aid was used. Add a liquid rinse aid to the dispenser. 
Water temperature is too low. Make sure the dishwasher is connected to hot water supply. 
Too many dishes are loaded. This can affect proper drying. 

Dishwasher has Bad Odor? 
There is leftover water from incomplete cycle. Remove all dishes, add detergent and run a normal cycle to clean dishwasher. 
The Drain Hose may be blocked. Contact a qualified appliance repair technician to repair drain hose obstructions. 
Dishwasher not being used often and/or dishes left inside too long. Remove all dishes, add 8 ounces of vinegar to empty glass upright on the bottom rack and run normal cycle. 

Dishwasher is Too Noisy? 
At the early stage of operation, sound is generated from dispenser cover and drain pump. This is normal. 
Check if dishwasher is level on the floor. 
An object fell inside the pump chamber (a screw, small piece of plastic, etc). Contact a qualified appliance repair technician to remove any foreign objects from pump chamber. 

Dishwasher Nozzle Not Rotating Smoothly? 
There is food particles clogging the nozzle hole, clean the nozzle. 
Check if dishwas are loaded properly, and the nozzles are not being blocked by large pots or dishes preventing them from rotating. Rotate nozzles by hand to check if they are free from obstructions. 

Water Not Draining From Dishwasher? 
The drain pump may be clogged. Contact a qualified appliance repair technician repair drain hose obstructions and check drain pump operation. 

Range Repair

For the home, kitchen and beyond, AGA manufactures appliances that homeowners have come to trust. Even a trustworthy appliance requires occasional maintenance or repair, however. If you’re in need of AGA appliance repair from experienced professionals, your local Appliance Helper can help.

Oven not heating 
The igniter is the most commonly defective part for an oven not heating. The igniter has two main functions. First, the igniter draws electrical current through the oven safety valve to open it. Second, the igniter gets hot enough to glow and ignite the gas in the oven burner. If the igniter gets weak, it will fail to open the safety valve correctly. If the valve does not open, the oven will not heat. To determine if the igniter is defective, observe the igniter when the oven is on. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. If the igniter is weak, replace it. If the igniter does not glow at all, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it. 

Oven doesn't bake evenly 
If the bake element is burned out, the oven will only be heated by the broil element. This will cause the oven to heat unevenly. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it. 

Oven broiler not working 
The broiler element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it. 

My Glass Top Electric Stove Burner's Not Working 
The surface element board has relays that regulate the power supply to the burners. If one or more of the relays fails, the surface element won’t work. If two or more burners fail at the same time, this indicates that the surface element board is likely at fault. If only one surface element won’t work, use a multimeter to test the element for continuity. If the surface element has continuity, the surface element board might be defective. 

Stove burner won't light 
The spark modules provides power to each surface burner spark electrode. If the burner is produces a weak spark, or if the burner sparks intermittently, the spark module might be defective. Before replacing the spark module, first check the spark electrode and the spark wire. If the spark electrode and spark wire are not at fault, the spark module is likely defective. If the spark module is defective, replace it. 

Oven temperature not accurate 
When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Refrigerator Repair

For the home, kitchen and beyond, AGA manufactures appliances that homeowners have come to trust. Even a trustworthy appliance requires occasional maintenance or repair, however. If you’re in need of AGA appliance repair from experienced professionals, your local Appliance Helper can help.

Frost Forming on Walls of Freezer? 
Check if air vent is blocked. Remove obstructions so air can freely circulate. 
Allow space between food for efficient air circulation. 
Is Freezer drawer properly closed? 

Water Dispenser Not Working? 
Check if water line is connected and shut-off valve is open. 
Is water supply line tubing crushed or twisted? 
Make sure tubing is free and clear of obstructions. 

Ice Maker Not Making Ice? 
Did you wait 12 hours after installing water supply line before trying to make ice? 
Check if water line is connected and shut-off valve is open. 
Is ice making function button/setting manually turned off? 

Fridge Doesn't Work at All or It Doesn't Cool Sufficiently? 
Check if power cord is properly connected. 
Is temperature control on display panel set to the correct temperature? 
Try setting it to a colder temperature. 

The Food inside the Fridge is Frozen? 
Is temperature control on display panel set to the correct temperature? 
Try setting it to a warmer temperature. 
Is the temperature in the room too cold? 

The Fridge is Making Unusual Noises and Sounds? 
Check if the refrigerator is stable and level on the floor. 
Is the back of the refrigerator too close to the wall that air cannot circulate? 
Check if anything was dropped behind or under the refrigerator.