Appliance Types


Appliance Brands


Article Categories


More Articles


Maytag Appliances
Maytag Appliances

Maytag Appliance Error Codes

The Maytag Washing Machine Company was founded in 1893 by businessman Frederick Maytag. In 1925, the Maytag Washing Machine Company became Maytag.


Dishwasher Error Codes

CODE: 0  
PROBLEM: If only this symbol is displayed, the controller did not detect any errors.  
FIX: None required, all is working property. 

CODE: F0  
PROBLEM: Control Board Error  
FIX: Control board door circuit does not appear to be operating properly, check control board. 

CODE: F1  
PROBLEM: Motor Fault - motor current not changing  
FIX: Check wiring to motor from control board. Check for bad motor. 

CODE: F2  
PROBLEM: Heater Fault - heater current not changing  
FIX: Check wiring to heater from control board. Check for bad heater, open high limit thermostat 

CODE: F3  
PROBLEM: High Current Error  
FIX: This error is probably caused by the heater or motor being energized when they should not be. This could be due to faulty wiring (shorts) or a welded relay. This error could also be caused by line current surges seen by the current sensor. 

CODE: F4  
PROBLEM: Detergent Fault - no conductivity change  
FIX: Check that consumer is using detergent in the main cup. Check the detergent cup wax motor and the wiring to and from the wax motor. 

CODE: F5  
PROBLEM: Rinse Aid Fault  
FIX: Check connector from control board to rinse dispenser. Check for bad rinse aid dispenser. 

CODE: F7  
PROBLEM: Turbidity Senior Fault  
FIX: A bad turbidity sensor reading has occurred. Check connections to Wash Process Sensor from control board. Also check for properly operating Wash Process Sensor. Finally check control board. 

CODE: F8  
PROBLEM: Wash Ann Fault  
FIX: A bad washer arm reading has occurred. Check connections to Wash Process Sensor from control board. Check pump for the correct back wash arms and alignment of sensor. Check for properly operating wash process sensor. Finally check control board. 

CODE: F9  
PROBLEM: Thermistor Fault  
FIX: A bad temperature sensor reading has occurred. Check connections to Wash Process Sensor from control board. Also check for properly operating Wash Process Sensor. Finally check control board. 

CODE: 1F0  
PROBLEM: Washer Arm Senior Error  
FIX: Check magnet In back rinse arms in pump. Check for operational sensor cluster. Check user loading pattern. 

CODE: 1F1  
PROBLEM: Conductivity Fault  
FIX: A bad conductivity sensor reading has occurred. Check connections to Wash Process Sensor from control board. Also check for properly operating Wash Process Sensor. Finally check control board. 

CODE: 1F2  
PROBLEM: High Limit Thermostat  
FIX: Check the high limit thermostat for operation. 

CODE: 1F3  
PROBLEM: Communication Problem  
FIX: A bad communication to the sensor has occurred. Check connections to Wash Process Sensor from control board. Also check for properly operating Wash Process Sensor. Finally check control board. 

CODE: 1F4  
PROBLEM: Cold Water Problem  
FIX: Check with the consumer to make sure the inlet water temperature Is near 120* F. If necessary suggest that the kitchen faucet be started before the cycle is to get hotter water to the dishwasher from the start 

CODE: 1F5  
PROBLEM: Current Sensor Bad  
FIX: A bad current sensor on the control board has been detected. Check to make sure connections to board are correct and the black power line Is properly connected to the VS' spade terminal on the board.


Dryer Error Codes

CODE: PF 
PROBLEM: Power failure 
FIX: A power failure occurred while the dryer was running. Press Start to continue the cycle or press Stop to clear the display. If this code frequently appears, check the power cord and replace it if it's damaged. 

CODE: F-01 
PROBLEM: Main electronic control board failure 
FIX: Unplug the dryer for 5 minutes and the plug the dryer back in. If the code reappears, replace the main electronic control board. 

CODE: F-02 
PROBLEM: User interface keypad failure 
FIX: A stuck button on the user interface control board causes this code. If you can't free the stuck key, replace the user interface control board. 

CODE: F-22 
PROBLEM: Exhaust thermistor failure 
FIX: Unplug the dryer. Check the resistance of the exhaust thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it. 

CODE: F-23 
PROBLEM: Exhaust thermistor failure 
FIX: Unplug the dryer. Check the resistance of the exhaust thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it. 

CODE: F-26 
PROBLEM: Drive motor failure 
FIX: Unplug the dryer. Check the wiring connections between the main electronic control board and the drive motor. If the wiring connections are sound, replace the drive motor. 

CODE: F-28 
PROBLEM: Moisture sensor failure 
FIX: Check the wiring harness connections between the moisture sensor and the main electronic control board. If the wiring connections are sound, replace the moisture sensor. 

CODE: F29 
PROBLEM: Moisture sensor failure 
FIX: Check the wiring harness connections between the moisture sensor and the main electronic control board. If the wiring connections are sound, replace the moisture sensor. 
 


Microwave Error Codes

CODE: C-10, C-11, C-12 
PROBLEM: Error with Gas/Easy/PH Sensor. 

CODE: C-20, C-21, C-22 
PROBLEM: Error with Temp Sensor. 

CODE: C-70, C-71, C-72 
PROBLEM: Error with Steam Sensor. 

CODE: C-A0, C-A1, C-A2 
PROBLEM: Functional error. 

CODE: C-d0, C-d1, C-d2 
PROBLEM: Door or Key error. 

CODE: C-F0, C-F1, C-F2 
PROBLEM: Communication error. 

CODE: E-01 
PROBLEM: Open Error 

CODE: E-02 
PROBLEM: Cooking Time Setting Over Error (Microwave) 

CODE: E-03 
PROBLEM: Cooking Time Setting Over Error (Grill) 

CODE: E-04 
PROBLEM: Cooking Time Setting Over Error (Convection) 

CODE: E-05 
PROBLEM: Cooking Time Setting Over Error (Combination) 

CODE: E-06 
PROBLEM: Swing Heater Error 

CODE: E-11 
PROBLEM: Open Gas Sensor Error 

CODE: E-12 
PROBLEM: Short Gas Sensor Error 

CODE: E-13 
PROBLEM: T1 Max Time Gas Sensor Error 

CODE: E-14 
PROBLEM: Dry Up / No Load Gas Sensor Error 

CODE: E-21 
PROBLEM: Open Temp Sensor Error 

CODE: E-22 
PROBLEM: Short Temp Sensor Error 

CODE: E-23 
PROBLEM: T1 Max Time Error 

CODE: E-24 
PROBLEM: Over Temperature Error 

CODE: E-25 
PROBLEM: Micro Cook Abnormal Temperature Error 

CODE: E-26 
PROBLEM: Temperature Not Over AD Error 

CODE: E-31 
PROBLEM: Open Gas Sensor Error 

CODE: E-32 
PROBLEM: Short Gas Sensor Error 

CODE: E-33 
PROBLEM: Under Weight Error 

CODE: E-34 
PROBLEM: Over Weight Error 

CODE: E-35 
PROBLEM: Invalid Weight Error 

CODE: E-36 
PROBLEM: Door Open Error 

CODE: E-41 
PROBLEM: Open Easy/PH Sensor Error 

CODE: E-42 
PROBLEM: Short Easy/PH Sensor Error 

CODE: E-43 
PROBLEM: T1 Max Time Easy/PH Sensor Error 

CODE: E-44 
PROBLEM: Dry Up Easy/PH Sensor Error 

CODE: E-45 
PROBLEM: Cooling Error 

CODE: E-46 
PROBLEM: Primary Open Error 

CODE: E-47 
PROBLEM: Door Open Error 

CODE: E-51 
PROBLEM: Sense Failure 

CODE: E-52 
PROBLEM: EEPROM Short Error 

CODE: E-53 
PROBLEM: Read/Write Error 

CODE: E-54 
PROBLEM: Zero Error 

CODE: E-61 
PROBLEM: Open Humidity Sensor Error 

CODE: E-62 
PROBLEM: Short Humidity Sensor Error 

CODE: E-63 
PROBLEM: T1 Max Time Humidity Sensor Error 

CODE: E-71 
PROBLEM: Steam Sensor Open Error 

CODE: E-72 
PROBLEM: Steam Sensor Short Error 

CODE: E-81 
PROBLEM: Communication Open Error 

CODE: E-82 
PROBLEM: Communication Short Error 

CODE: E-83 
PROBLEM: Communication Error 

CODE: E-X1 
PROBLEM: Additional Open Error 

CODE: E-X2 
PROBLEM: Additional Short Error 

CODE: -SE- 
PROBLEM: Key Short Error 

CODE: TE 
PROBLEM: Touch Communication Error


Range Error Codes

CODE: F0  
PROBLEM: Function key stuck  
FIX: Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). 

CODE: F1  
PROBLEM: Defective touch pad or clock (ERC)  
FIX: Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information. 

CODE: F2  
PROBLEM: Oven temperature too hot  
FIX: Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness. 

CODE: F3 or F4  
PROBLEM: Shorted or open oven temperature sensor (RTD)  
FIX: Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok. 

CODE: F5  
PROBLEM: Watchdog and hardware conflict  
FIX: Replace clock (ERC). 

CODE: F7  
PROBLEM: Function key shorted or stuck  
FIX: Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). 

CODE: F8  
PROBLEM: Analog / Digital problem  
FIX: Replace clock (ERC). 

CODE: F9  
PROBLEM: Door latch  
FIX: Check door latch components. 
 


Refrigerator Error Codes

CODE: Flashing "F" 
PROBLEM: If the letter "F" is flashing on the display the refrigerator, try resetting the refrigerator as instructed below. 
FIX: 
Reset power to the product: 
- Power unit down by turning off the circuit breaker(s) or unplugging the product for one (1) minute. 
- Power unit up by turning on the circuit breaker(s) or plugging the product back in. 
- Ensure the cooling function is turned on. 
- Monitor the refrigerator for one (1) minute to ensure the error code does not display again. 
 
CODE: PO Error Code 
PROBLEM: Power Outage: The Power Outage indicator lets you know if the power supply to the refrigerator has been off and the freezer temperature has risen to 18°F (-8°C) or higher. The control panel temperature display will read “PO,” and an alert tone will sound three times. 
FIX:
“Confirm” will blink until you acknowledge the power outage by pressing MEASURED FILL under “Confirm.” Once the power outage has been confirmed, the “PO” will disappear, and the display will return to the Home screen.


Washer Error Codes

CODE: LOC or LC  
PROBLEM: Control Lock has been activated  
FIX: Touch the Control Lock button, or (on older models) determine which button activates control lock from your Owner's Manual. Some models require you to press and hold the button. 

CODE: dET  
PROBLEM: Detergent cartridge not detected in the dispenser.  
FIX: This is on select models. If you are using single-load doses of detergent, ignore this message. Ensure the dispenser cartridge is inserted correctly and the dispenser drawer is shut completely. 

CODE: Int  
PROBLEM: The cycle was paused or canceled.  
FIX: The washer may take 20 to 30 minutes to stop spinning and drain, and will display this error code during that time. To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. 

CODE: rL or F34  
PROBLEM: Items were detected in the washer during the Clean Washer cycle.  
FIX: Remove items from the drum and restart the Clean Washer cycle. 

CODE: Sud or Sd  
PROBLEM: There are too many suds in the washing machine.  
FIX: The washer will not be able to spin out water with the excess suds. When "Sud" or "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. During this time, the washer pauses the tumbling and adds water for additional rinsing. This pause allows the bubbles in the suds to break. This pause and rinsing are necessary and may occur several times to eliminate the suds. 

CODE: F5 E2  
PROBLEM: The door is not locking properly.  
FIX: Check that there are no items blocking the door and it is closing completely. Press the Pause or Cancel button twice and the Power button once to clear the code. 

CODE: F7 E1  
PROBLEM: Indicates a motor speed sensing error 
FIX: The motor can not achieve the correct speed for the cycle selection. Check that all the shipping bolts have been removed and the washer has not been overloaded 

CODE: F8 E1 or LO FL  
PROBLEM: The washer is sensing a low flow of water.  
FIX: Check that the household water supply is turned on and both the cold and the hot water faucets or valves are fully open. The water inlet hoses are not kinked (learn more about How to check your Fill Hoses if your Washer is not Filling) There are no anti-flood hoses and controls in the water line connected to the washer (learn more about Should I use Flood Safe Devices on my Front Load Washer. Press the Pause or Cancel button twice and the Power button once to clear the code. 

CODE: F8 E2  
PROBLEM: Indicates there is a problem with the Dispenser System  
FIX: This is on select models. Verify detergent drawer or detergent cartridge is not clogged with detergent.  

CODE: F9 E1  
PROBLEM: Indicates that drain times are longer than expected, typically over eight (8) minutes.  
FIX: Make sure the drain hose is not kinked or clogged. Use the U-shaped drain hose form on the drain hose. The standpipe (drainpipe) height requirements are 96" (244 cm) maximum and 39" (99 cm) minimum. 

CODE: Other F# E# code  
PROBLEM: Indicates other error  
FIX: Unplug the washer or disconnect the power for one minute and reconnect it again. Reselect the cycle and press Start. 



Maytag Appliance Error Codes

Maytag appliance fault codes

Maytag appliance diagnostic codes

Maytag appliance error symbols

Maytag appliance common faults


Product Reviews:

I saved for this refrigerator for some time and assumed at my age this woul
I saved for this refrigerator for some time and assumed at my age this would be my last one. Thats a joke, less than 2 years and I see this water leaking on my floor. I blamed my dog at first. This was a Home Depot purchase. I love the middle drawer but the freezer has this problem. I removed the ice but it comes back. I did not purchase the extended warranty because if you have an excellent product, you dont need an extended warranty. And of course this happened RIGHT AFTER the warranty ran out. I am VERY upset with Maytag/Whirlpool. Will NEVER buy another product from them. This fridge should not have problems in less than 2 years.
Published: August 13, 2015
Sandra of Joshua Tree, CA
Source: consumeraffairs.com

Purchased Maytag dishwasher two years ago from Home Depot. It worked for ab
Purchased Maytag dishwasher two years ago from Home Depot. It worked for about six months before it would stop working. When adding a dish after initial start would cause the unit to just die. After unplugging unit for a day the start/cancel drain buttons will flash. After reading online about a demo mode have tried and gotten it to work periodically. I continue to read online and have found there is a diagnostic mode. The settings are in a schematic packed with the unit. I found mine written in French (part #W10321879A). I called Maytag/Whirlpool and asked for the English version. They could not and would not provide me with part #W10321878A the English version, a single sheet of paper. They will only provide to a licensed repair technician. I am only asking for what should have been included in the original purchase. I paid $850 for a dishwasher that is not chump change. I know the control panel is bad but I would like to use it until the new part arrives. I think I may return the control panel and take my losses and go buy a brand that is not owned by Cesspool (Whirlpool).
Published: March 2, 2016
Randy of Somonauk, IL
Source: consumeraffairs.com

Purchased Maytag 3000 series washer and dryer in June 2009. Like many other
Purchased Maytag 3000 series washer and dryer in June 2009. Like many other reviews, the washer is making a terrible loud noise during the spin cycle. I contacted Maytag customer service and was told wait time is 10 minutes and opted for the call back option. Received a call back from an agent located in Tennessee, United States and he checked for recalls or projects and found nothing. Offered a technician call in my area for $112.00 for 30 minutes to diagnose the problem. I told him that if he checked on the reviews, he will see many regarding this problem and a bearing issue at a cost of up to $700.00. The Maytag repairman is not only lonely but out of business and Whirlpool bought them out. I would never again purchase Maytag or Whirlpool products. We are seniors and do not abuse our appliances and why do they not last at least 15 years. Talk about disposal washer machines, who can afford to purchase them every few years. The washer sounds like a jet going through our house when it is in the spin cycle.
Published: August 17, 2017
Glenda of Elginburg, ON
Source: consumeraffairs.com

I bought a fridge, model number MBF1958, its a top fridge-bottom freezer. T
I bought a fridge, model number MBF1958, its a top fridge-bottom freezer. The freezer part leaked and spilled water that then froze onto the bottom of the freezer, which of course froze. I discovered this 1 month after the 1 year warranty ended. Maytag gave me a courtesy repair service guaranteed for 90 days. Of course, 2 weeks after the 90-day period ended, I have the same problem again.
Published: October 4, 2011
Lawrence of Los Angeles, CA
Source: consumeraffairs.com

My husband and I bought a Maytag dishwasher, Stove and Fridge. We were very
My husband and I bought a Maytag dishwasher, Stove and Fridge. We were very reluctant because at our prior home we had Maytag appliances and they kept going out. Against our better judgement when we moved into our new home we decided to go with Maytag once again. First the dishwasher front panel stopped working. We had it replaced and it cost over 250.00 with replacement part and labor. Not a week later went by when our Fridge went out, that cost us another 300.00 plus to fix. Keep in mind we had only had these appliances for about 14 months. Less than a year of replacing the dishwasher panel it has gone out again. This is very frustrating and expensive. I dont usually write comments, but felt the public needed to know that Maytag has poorly made appliances. I recommend you spend the extra couple of hundred bucks and buy the better brands and warranties. Thank you.
Published: November 5, 2014
Carolyn of Farmers Branch, TX
Source: consumeraffairs.com

MDB7749SBW - Purchased a new dishwasher from Home Depot & had them inst
MDB7749SBW - Purchased a new dishwasher from Home Depot & had them install it. It worked for 6 1/2 months & the control panel blinked & went dead. I did some research & found there were a lot of problems with the control panels & even a class action lawsuit. I went to Home Depot & they said contact Maytag & brushed me off. I set up a repair per warranty & all was fine for 10 months & same problem has happened again. I told them at Home Depot to replace the unit since nearly every repair job on the control panels prematurely fail again every time. I am going back to the Home Depot again. I do have older Maytag appliances that perform as required & I do know Lowes would have replaced the defective dishwasher.
Published: September 23, 2014
Neil of Satsuma, AL
Source: consumeraffairs.com

At 14 months old Main computer box failed, caused the machine to shut down
At 14 months old Main computer box failed, caused the machine to shut down on unbalanced load ($400). At 28 months old Main computer box failed, caused the machine to shut down on unbalanced load. In addition when the service guy was underneath the machine to change the module he noticed the stator housing to the motor was falling off. He said he never saw anything like it. After reading about all the problems people have with these machines I have talked friends and relatives out of making the same mistake of buying an old and trusted brand like Maytag. .
Published: November 23, 2013
Paul of Union, NJ
Source: consumeraffairs.com

I purchased an over the range microwave (OTR), boxing day 2018. It failed J
I purchased an over the range microwave (OTR), boxing day 2018. It failed January 2021. It worked great before failing. The issue with Maytag/Whirlpool is their service. I told them before they came out that I was only interested in having it fixed if it could be done that day. They checked that they had the parts and said they could do it, so I moved forward with the appointment. Well they didnt fix it, and said that they need to order a part, which they said would take several weeks. They are trying to bill me the service fee $167, and expect me to wait a month or possibly more to get the part and fix the microwave. Now Im faced with having to pay a service fee for something not fixed and buying a new microwave. Lesson: Never try to repair, cheaper to buy a new product. Other lesson, never buy Maytag or Whirlpool product again. Despite what is on their website and advertising, they have terrible customer service.
Published: January 29, 2021
Robin of Langley Township, BC
Source: consumeraffairs.com

Bought a Maytag Washer, in 2010 the Bravo. Good looking washer and dryer. I
Bought a Maytag Washer, in 2010 the Bravo. Good looking washer and dryer. I bought a 4 yr warranty for both. My washer has needed service every yr of the warranty, leaks and has stopped running. Now it is out of warranty and it is leaking again. Was just fixed a little over a year ago. I am now seeing a lot of rust around the top of the washer. It has just about covered the one port where you put the bleach in. The seam around the top in the crease is full of rust. My dryer is fine, bought them both at the same time. I have never seen this on a washer before. My mom has had her Maytag for yrs no problem. I bought these thinking they would last, boy was I wrong.
Published: October 28, 2016
Michael of Taylor Mill, KY
Source: consumeraffairs.com

The freezer will frost up and the shelves will not move. Repairman has been
The freezer will frost up and the shelves will not move. Repairman has been out three times, once to clean the drain. The second time he installed new tracks for 250.00. Two hours later they still wont move. The third time out he said it was repaired, but two hours later they didnt move again. We are very disappointed with Maytag.
Published: August 16, 2015
Joe of Hammond, IN
Source: consumeraffairs.com

Worst washing machine I have ever owned. Read all the other reviews and con
Worst washing machine I have ever owned. Read all the other reviews and concur with them. We get pin sized holes all the time. Brand new shirts yesterday and they have black stains all over them - not the first time either. Inside of stainless steel tub looks clean. Where do the black marks come from? Last Maytag I will ever buy!!
Published: September 1, 2014
Roger of Redington Beach, FL
Source: consumeraffairs.com

I bought my Maytag dishwasher MDB7749SBM0 three years ago. After it was in
I bought my Maytag dishwasher MDB7749SBM0 three years ago. After it was in one month it already needed a service call. It needed a control panel. Out of the dishwasher 4 weeks because this happened over Thanksgiving. Two months later it stopped working and needed another service call. Technician was inexperienced and another one had to be called. Out of the dishwasher 3 weeks. At this time, and because of the expense of the machine, I purchased an extended warranty. This was control panel number two. Not long after, the heating element had to be replaced. Two weeks without the dishwasher. Now, my dishwasher stopped working again and it needs a new control panel. The technician is rude but did offer the information that the moisture ruins the control panels. IT IS A DISHWASHER!!! IT USES WATER!!! I only run the dishwasher twice per week so I cant imagine how poorly it would hold up if it was run more often. I am on my third week without the dishwasher because the part is on back-order! No one can tell us when it will be in. I bought a Maytag because I thought they had the appliance market under control. MY MISTAKE! I am very angry.
Published: September 23, 2015
Angela of Dingmans Ferry, PA
Source: consumeraffairs.com

Washer water level sucks low at max levels kept freezing. Bought mtw7230. I
Washer water level sucks low at max levels kept freezing. Bought mtw7230. Its junk agitator doesnt rub good. Not like dual action agitator and when I start cycle says 34 min but I timed it takes one hour. Same goes to 1:30 to 2 hours takes 10 min for water to pour in spins for nothing. I sent it back. 965 I paid.
Published: April 2, 2020
Shade of Springfield, OH
Source: consumeraffairs.com

I am a regular customer of Leons and used to buy all my home appliances fro
I am a regular customer of Leons and used to buy all my home appliances from them, because I trusted their quality and service of their products. However, last time I bought French Door Maytag refrigerator from them, about two years ago, we suffered from defects in this type of fridge. The problem started before one year when my wife saw some leakage of water on floor in the front side under the fridge freezer door. In the beginning, this was occurring once a month or every two weeks, so she didnt think it would be a problem or it might happen occasionally. However, the water leakage now became worse and almost every day. We had to put a towel permanently under the freezer door to dry the water which appeared ugly. Also, I had couple of accidents that my child slide over because of that water leakage. I spoke to one technician, he told me resolving this type of problems is not guaranteed because the problem will appear again or after while. He said this could be a manufacturing defects in this type of Maytag fridge models!!! Another problem appeared also one year ago, that one of the door handle started to shake very little, but now it looks like moving from its position and there is no way to fix it!!!Therefore, when I requested the help from Leons they told me that, You didnt buy the extended warranty and we cant do anything for you!!! You can talk directly to Maytag. Then, I send email to Maytag explaining the problem. They even didnt bother to reply or call me. Now, I feel that I was bluffed by these companies. I didnt think that I was buying a $2,000 refrigerator to scrap it after two years. That is ridiculous when you buy defected product from them, but they dont care to resolve the issue.
Published: July 23, 2015
Zafer of Mississauga, ON
Source: consumeraffairs.com

Bought this machine with the intention of having at LEAST 10 problem free y
Bought this machine with the intention of having at LEAST 10 problem free years with it. Its a Maytag after all. Not an unreasonable expectation. Within the first 2 years, the machine sounded like the bearings were going out (heavy, grinding noises when it shifted gears). Repairman came, replaced the entire drum (only way to get to the gears, I guess). Didnt fix a thing. Then the rinse and spin cycle on ANY wash cycle randomly quits. Just stops. Full load of wet, soapy clothes, sitting in the tub while an LD error code quietly flashes.Its not uncommon for it to take two full days of screwing around with this machine to get one load of clothes done. Have to UNPLUG the machine, let it sit for about an hour, and try again. It is the biggest waste of money ever and I will NEVER buy another Maytag nothing. Contacted Maytag and they recommended I call a repairman...REALLY? REALLY? Gee, I wish I had thought of that. Repair guy has been to my house so damn many times for this machine, we are now friends on Facebook. Dont waste your money on this machine.
Published: September 3, 2019
Valerie of Wasilla, AK
Source: consumeraffairs.com

About 9 yrs ago, we remodeled our house. And when it came to appliances, I
About 9 yrs ago, we remodeled our house. And when it came to appliances, I was vehement we were going to go with Maytag because of their great name and reliability (We have 7 sons and needed reliable appliances). Boy, was I ever wrong?! We have gone through 2 Maytag dishwashers and countless repairs to the Maytag dryer. And our top of the line refrigerator has been a piece of junk!Of course, shortly after the year warranty was up, the flimsy pieces of plastic holding up the shelves started breaking off. The repairman, who came to replace the cooling coil on the refrigerator, said those shelf plugs couldnt be fixed. The whole front of all drawers have come off as well. He mentioned that Maytag was going bankrupt and started compromising on fit and finish. And he said that we just happened to purchase in that time frame. Now, we have a compressor that needs to be replaced for over $500! I have, in my garage, a Gibson freezer from my grandma that is 40 yrs old, and literally the most reliable appliance we have. Never have we made any repairs to it!I called Whirlpool (since they bought Maytag) to tell about my horrible experience with Maytag, and let them know we have to replace these appliances. I asked if there was anything they could/would do (discounts whatever) to redeem their name. I was told that they would not be able to help at all. So, I told them that I would not give Whirlpool anymore of my business and warn anyone I could, not to buy Maytag, Whirlpool or Amana. Isnt there any appliance company out there who cares about customer service, a good name and a reliable product?!
Published: August 14, 2011
Becky of Allegan, MI
Source: consumeraffairs.com

I just bought a brand new Maytag microwave a few weeks ago. The door is alr
I just bought a brand new Maytag microwave a few weeks ago. The door is already broken! I’ve been sitting here 4 hours! waiting for a repairman man. No call, no show! I am missing work and gym time because MAYTAG sold me a faulty microwave in the first place! Never again will I buy Maytag products!
Published: January 2, 2020
Lisa of Lowell, MA
Source: consumeraffairs.com

After 18 months of use Our Maytag Dishwasher (MDB7749) has the same control
After 18 months of use Our Maytag Dishwasher (MDB7749) has the same control panel problem as a lot of other user complaints. I wish I too had read the consumer reviews before my purchase. We will never buy another Whirlpool product!!
Published: February 9, 2015
Marlin of Orem, UT
Source: consumeraffairs.com

First I would like to thank the salesman who has worked diligently to solve
First I would like to thank the salesman who has worked diligently to solve the problem I am having. The first load of dark clothes I washed came out with what looked like lint on them. It has to be scraped off. Yes I am using HE detergent. Yes I am using the minimum amount recommended by the manufacturer. & yes to all the other questions I have asked. The solution was to wash the dark clothes on power wash with an extra rinse. Very energy efficient! This was NOT the answer so I was given a 1-800 # to call. After giving all the necessary information & answering all of the questions about detergent etc. the conversation became a little more in depth. Does it happen with dark clothes? Do you dry your clothes outside or in a drier? It was becoming obvious to me that Maytag is aware of this problem. By this point I was even unhappier as no solutions were being offered. Finally after several would you mind holding the line again for just a minute he said he couldnt tell me to do this but some of his friends add a cup of vinegar to their wash. At this point I told him I was sorry I had ever bought this machine. He then said he would have a technician arrange an appointment. He arrived & declared I was using too much detergent even though by then I was using half on the manufacturers recommended amount. Buying an energy efficient washer where I have to use POWER WASH, EXTRA RINSE, VINEGAR & DRIER is not a good answer for a problem Maytag must be aware of as I read the reviews today. I have just done 2 loads of dark laundry with no detergent & the pants are marked so I WANT AN ANSWER.
Published: November 18, 2018
Dawn of Other, OTHER
Source: consumeraffairs.com

Had a brand new Maytag MDB4949 dishwasher installed on 10/20/15. Noticed an
Had a brand new Maytag MDB4949 dishwasher installed on 10/20/15. Noticed an acrid smell of burning plastic coming from the pull handle. After going to the reviews I see a pattern of shorting control panel boards melting the ribbon cable. Having repaired Xerox copy machines for 17 years, I recognized the smell of an electronics short and melting plastic. There are 600+ complaints for the same thing. Going to call the store we purchased it from and will escalate from there.
Published: October 29, 2015
Stuart of Tinton Falls , NJ
Source: consumeraffairs.com

I purchased a Maytag refrigerator in November 2016. It is now the first wee
I purchased a Maytag refrigerator in November 2016. It is now the first week of June 2017 and the ice dispenser no longer works and the door alarm goes off incessantly and intermittently all day and all night. I am so sick of being woken up by the alarm in the middle of the night. I reread the manual and ran through the limited troubleshooting to no avail. I called customer service, sat on hold for a half hour, and scheduled a service call. As an interim stopgap for the pull-my-hair-out alarm issue, the operator suggested I disconnect some wires, as there is no off button for the door alarm. I wasnt dumb enough to do that and void my warranty. Best part of the call was when the operator offered to sell me an extended warranty. Well see how the service appointment goes, but I have a feeling this is the last Maytag product I will ever get. I am very curious about the lack of product recall as my research unveiled hundreds of complaints about the exact same issues I am having. Why does it seem to take a class action lawsuit before a company fulfills the promises in their advertising? Model number: MFI2570FEZ01 Purchased from Home Depot in Nov 2016 for $1,230.
Published: June 6, 2017
Christine of Katy, TX
Source: consumeraffairs.com

I bought a Maytag washer and dryer in Cookeville TN. In 2018. After a year
I bought a Maytag washer and dryer in Cookeville TN. In 2018. After a year it quit. The service man from the authorized dealer in Cookeville could not repair it. After numerous calls Maytag sent a service man to repair it, this took about three weeks. This washer is a Maytag industrial, it has a 5 year parts and labor warranty, and 10 years on the motors. Now it is out again, after calling Maytag, and holding on the line for an hour, finally I had to chat with someone, and they set up an appointment for about 3 days. So service company call now and says it will be another week before they can sent someone to look at it, and another week to get the parts. They also questioned my warranty. I gave high dollar for this washer, what’s happened to Maytag?
Published: January 5, 2022
L of Baxter, TN
Source: consumeraffairs.com

I was sooo excited to get this very very very expensive washer and dryer on
I was sooo excited to get this very very very expensive washer and dryer only to have the worst disappointment and let down...the washer in particular is horrible!!! It doesn’t wash!!! I thought I was crazy until I started reading all of these other reviews and found that many more people have had the same experience as I have... The tub never fills with water and the clothing never gets clean. I would love to start a class action against Maytag and get my money back or get a replacement.
Published: April 5, 2018
Stacy of Miami Shores, FL
Source: consumeraffairs.com

This is a review of a washer that is no longer sold. I bought a top of the
This is a review of a washer that is no longer sold. I bought a top of the line Maytag washer 45 years ago. After around 25 years the control (all mechanical) started sticking during the cycle. I opened it up, sprayed it with TV Tuner cleaner, worked it a few times, and it has worked perfectly ever since. That is the only problem or repair on that machine since it was purchased!
Published: May 22, 2020
Dan of Long Island City, NY
Source: consumeraffairs.com

We purchased a new Maytag Bravo washer and dryer on March 4, 2011. On Janua
We purchased a new Maytag Bravo washer and dryer on March 4, 2011. On January 26, 2015, our washer stopped spinning the clothes. We purchased these appliances while preparing for retirement, thinking we would possibly never have to purchase them again. There is only two of us! Wrote to Maytag (when it was still Maytag) and got a response of So sorry **, we can fix your washer for $319.00. We could buy a new washer for not much more than that!!!!!
Published: May 26, 2015
Karen of Pollock Pines, CA
Source: consumeraffairs.com

It seems to be a broken record with other reviews. I had a 2 year old micro
It seems to be a broken record with other reviews. I had a 2 year old microwave and the door doesnt recognize that its closed. Which means it wont turn on when I close the door. So you have to open and close it maybe 30-50 times and sometimes it works. I call Maytag who schedules a company but doesnt disclose anything about the warranty or service cost. I was thinking it would be a nominal fee since it falls under a 10 year warranty. The company calls and confirms the cost and I recheck with Maytag who said that the warranty only covers parts. So I buy a $300 microwave and have to pay $160 for a service visit because your company made inferior parts. Absolute sham of a company. Buyer Beware...
Published: March 4, 2019
Broy of Lorton, VA
Source: consumeraffairs.com

I purchased my Maytag MDB7749AWM2 dishwasher approximately 3 years ago. Sin
I purchased my Maytag MDB7749AWM2 dishwasher approximately 3 years ago. Since it was stainless inside and out I felt that I was making a long-lasting purchase. The handle on this particular model doesnt have a latch release button. You are actually just pulling the door open. That would be fine if they had used something besides plastic on the control panel cover where the handle is built into. The control panel is only held together with plastic pieces that the screws go into. After only a couple of years of pulling on this the plastic parts holding the screws have all broken causing my control panel to just flash. My husband is a maintenance engineer and upon taking the screws out couldnt believe with such a high quality machine that they had used plastic in the main place where they needed strength. The wiring was cut so short to the control panel that one of the plugs had come undone when the cover began separating. I only need the plastic cover because my control panel is working fine but of course you have to buy the entire control unit which is $150.I purchased Maytag because I thought they represented a reputable American company but I was very wrong. When I contacted Maytag about the problem they were very unconcerned and just gave me a link where I could purchase the part. When I told them it would be my last Maytag product they didnt even have a comment. Giving Made in America a bad name.
Published: August 30, 2016
Karen of Summerville, GA
Source: consumeraffairs.com

Maytag Bravos 300 Washer - Dont buy this washer! This expensive washer has
Maytag Bravos 300 Washer - Dont buy this washer! This expensive washer has been the worst household appliance Ive ever owned. We bought Maytag thinking we were getting the best. NOT SO! We could have spent half the money and got a better washer. Maytag is a brand of the past. Ive had this machine about 4 years and its been a problem since day 1. There is no soak cycle but I knew that from the beginning. The problems Ive had so far are: Not enough water so items dont get wet and have to wash again, Terrible wrinkles, torn sheets and garments, items still dirty, getting louder & louder, and the most recent problem is the plastic from the top edge of the tub is now shredding and getting sharp plastic pieces in my clothes.
Published: May 26, 2014
Jean of Reno, NV
Source: consumeraffairs.com

Purchased this Maytag dishwasher (Model DB7749SBM2) from a Sears 2014, no p
Purchased this Maytag dishwasher (Model DB7749SBM2) from a Sears 2014, no problems until now in late June 2014. The control panel is not responding. Start/Resume light is off, pressing it doesnt seem to do anything. Cancel light is off, pressing it does trigger the cancel drain process. Wash Cycle choices either dont respond, or for 2 of the choices engage an incorrect cycle. Option choices dont respond. Delay light comes on when an incorrect cycle choice displays but stays at 2 hours, cannot be toggled off or to a different delay length. Holding Control Lock or Delay for 3 seconds doesnt seem to clear the circuit board logic. Problem began with the Cycle choice buttons defaulting to Rinse Only. Control panel behaves not at all or incorrectly as described above. Seems to be a common Maytag control board/panel problem. We need help as we are unable to afford repair or another dishwasher. This time, it will not run at all. I called customer service today (August 11, 2015) and they expect me to pay for the repair. Repairman already said electronic board bad at a cost of around $300 just for the parts. It is easy to Google and find multiple review sites that indicate hundreds of consumers have similar problems, but Maytag will not acknowledge any issue. Based on the pattern the warranty is not going to help as it goes out just after a year. For only having it 1 1/2 years it is becoming very expensive. There should be a recall on this control panel.
Published: August 12, 2015
robin of Lagrange, GA
Source: consumeraffairs.com

We have had our Maytag dishwasher MDB9100AWQ only 5 years and now it keeps
We have had our Maytag dishwasher MDB9100AWQ only 5 years and now it keeps shutting off. I see there is plenty of this complaint. I will not purchase another Maytag product after reading all these reviews and experiencing it.
Published: October 29, 2014
Kay of Taylorsville, UT
Source: consumeraffairs.com

The bearings and motor went out in less than 3 years. The warranty good - t
The bearings and motor went out in less than 3 years. The warranty good - the dealer I purchased from Siano Appliance gave me credit to purchase another Maytag washer - which I had to purchase an additional warranty for $320. The new Maytag is less than 5 months old - the motor has been replaced and waiting on a tech now to fix it. It would not come on. SO in warranties I have paid over $640 and am still having issues with the new washer. The first time I purchased a warranty for 10 year - when the machine was replaced I had to purchase another warranty for that machine - now if I have to replaced this one that will be an additional $320. IS this legal?
Published: November 20, 2018
Shirley of Southaven, MS
Source: consumeraffairs.com

Maytag washer manufacture changes are not worth a dime. I suspect EPA made
Maytag washer manufacture changes are not worth a dime. I suspect EPA made the changes, and engineering was made by someone that has never washed a load of clothes in the entire life. There is no agitator and/or supposedly made to conserve water. Well, it saves water alright with each load. There will be a 2 foot circle in the middle of a bed sheet that doesnt get wet; the same with a sweaters. I have checked with different stores and all made the same. And heaven forbid if you dropped a sock and wanted to add it to the load with the mate. The lid locks. I am both angry and dissatisfied and will tell this same story to anyone wanting to purchase a washing machine.
Published: January 30, 2012
Elva of Columbus, MS
Source: consumeraffairs.com

I love my dishwasher. The only hold back is similar to what I hear about al
I love my dishwasher. The only hold back is similar to what I hear about all others and that is that it takes a long time. I love that is it quiet, has lots of room and is easy to use.
Published: January 22, 2018
Dj of Olathe, KS
Source: consumeraffairs.com

Purchased this dishwasher about 1 1/2 yrs ago. Luckily the first two times
Purchased this dishwasher about 1 1/2 yrs ago. Luckily the first two times the control panel went out, it was still under warranty (within the first year). Now its gone out again! This is the third time! What happens is all the buttons will work except for the START and CANCEL. This has been the same issue every time. I tried restarting it, made sure there was not a leak that somehow was getting to the internal electrical components in the panel. I actually know the Maytag repairman by name. Its nothing like those old commercials where the Maytag repairman sits around and has all the time in the world because their products never break. Those days are over and these guys are busy working to fix these devices they label as dishwashers. Since my warranty is now expired, it was an unexpected $96 service call to tell me what I already knew - Its your panel again sir, it needs to be replaced. Well have to order one for you and itll be $265 for parts and labor plus the $96 service call = $361 repair for something that will likely break again in a few months. Never am I buying a Maytag product again.
Published: April 5, 2014
G of San Antonio, TX
Source: consumeraffairs.com

I bought my refrigerator in May of 2012. Brand new from Home Depot. It is l
I bought my refrigerator in May of 2012. Brand new from Home Depot. It is less than 3 years old. Now it is not working. I did not purchase an extended warranty. I never thought in less than 3 years my fridge would stop working. I called Maytag, first question from them was about warranty. So I knew I was screwed. So, basically for $300 they would come out and fix the problem. I only paid $800 for the fridge. I am lost as to why in 3 years my fridge is broke?? Makes no sense to me. So I paid a tech $100 to tell me what was wrong with it. The evaporator is leaking. It is leaking. So the evaporator is bad and I cannot fix myself. So for another $300 they would fix, so a total of $400 in an $800 fridge.I am pissed. I remember my parents having a fridge for over 25 years. Why does Maytag not take responsibility for their problem. The products we buy should last longer than 3 years. It is just a way for them to get us to buy another product. So needless to say, I am one pissed off customer. So let the emailing and letter writing begin.
Published: February 12, 2015
Michael of Griffin, GA
Source: consumeraffairs.com

I purchased this new Maytag washer (Model # MVWC300XW, Serial # 12621033) f
I purchased this new Maytag washer (Model # MVWC300XW, Serial # 12621033) from Hahn Appliance Warehouse in Oklahoma City, OK 73107 on November 23, 2011. It is less than six months old, and the transmission has gone out. Hahn advised me that they had to go through Maytag Service, and they would only replace the part. I contacted Maytag/Whirlpool Service Corp. directly and spoke with a manager named David, who informed me he was sorry but would not authorize a refund or exchange for a better product because this was the first service call. I am very dissatisfied with this product and with the service standards that Whirlpool/Maytag offers on their products. If I were to sell a product that I knew has had numerous complaints, I would pull that product from my line offering and make either a full refund or replace with a higher level service product.
Published: May 4, 2012
Jerry of Edmond, OK
Source: consumeraffairs.com

Worse washer ever, clothes are dirty and smelly. Customer Service is even w
Worse washer ever, clothes are dirty and smelly. Customer Service is even worse. After a normal cycle clothes come out half wet, never enough water in the machine. Everything gets washed on bulky and there is soap residue on everything. Have taken clothes to the laundromat on several occasions just to get them clean. I cant wait to get rid of this piece of crap!!! Never ever buying Maytag again!! Warning to everyone... DO NOT BUY THIS MACHINE!! And with the extended warranty, they still dont cover it. :(
Published: March 10, 2015
Leslie of Pipestone, MN
Source: consumeraffairs.com

I bought the Maytag Bravos XL HE washing machine because I needed a machine
I bought the Maytag Bravos XL HE washing machine because I needed a machine that could handle large loads to save me time doing multiple loads for everyday items like jeans to towels, blankets as well as delicates. This machine is a COMPLETE disappointment. It does NOT get anything clean unless I wash it 4 times with bleach and pre-stain 4 times. You know what bleach does to your clothes! The water level is so low I can only wash 4 things at a time and I still have to wash additional times. It doesnt get the smell or food stains out. Not a good choice for an active family or person. Ive had clothes come out with suds still on them after washing three times. I use less than the recommended amount of HE detergent. There was a $250 agitator washer by GE at Lowes but it was smaller - how I wish I bought it. These impeller HE machines dont work. My advice steer clear of this Maytag product unless you like to waste your time re-doing loads of laundry.
Published: September 5, 2015
Cyndi of Lincroft, NJ
Source: consumeraffairs.com

We had 10 year old Kenmore units in the past that were much better and work
We had 10 year old Kenmore units in the past that were much better and worked faster at both cleaning and drying. We prefer a washer with a agitator and top load. The dryer is preferred to be gas. Both the Maytag washer and dryer we have need constant repairs. Washer for control panel repairs, and dryer for false heat sensing problems. Now they say not to use dryer anti-wrinkle sheets. The washer needs less sheets put in at a time to rinse better. It is a agitator less model.
Published: February 6, 2019
Robert of Prescott, Arizona
Source: consumeraffairs.com

I bought the larger capacity machines to save time because Im so busy with
I bought the larger capacity machines to save time because Im so busy with my family and wanted to cut down on loads. I was surprised to find the capacity can really only operate at half, which is as large as my old, smaller machines. The washer is extremely sensitive, meaning it may take four or five tries (this morning was four) to arrange the clothes - even a small load of delicates - in it in the exact way the machine wants before it will allow the cycle to start. This is exceptionally frustrating, particularly during the busy morning or when you are tired at night. So you have to stand there and wait until the sensing function is happy and you see the water pouring in. Yet often you will return to the machine and it will have an error message that occurs inexplicably during the spin cycle, so the wash cycle will need to be restarted. It cannot just be continued. The machine is not only a huge time waster but a water/detergent waster as well.I learned that the sensing function on the dryer is useless as well after coming back to many loads of damp clothes that sat there, got little funny smelling as a result, and had to be rewashed in the nightmare washer lol. So now I just use the timer function. It takes about two hours to dry a regular load of towels, so be prepared for that. I bought Maytag because it is an American-made product, but I wont make the same mistake next time. If the quality is any reflection of the functionality, it probably wont last very long anyway. Heres to hoping.
Published: August 25, 2021
Dana of Freehold, NJ
Source: consumeraffairs.com

We bought a new Maytag Bravo washing machine last spring. It was easy to un
We bought a new Maytag Bravo washing machine last spring. It was easy to understand the instructions, but that is all that was good about it. Like everyone is saying. It doesnt wash the clothes completely. On every dark load I have what looks like streaks of lint. I contacted Maytag. They gave me suggestions for solutions. None of them worked. I have put the clothes on for a second rinse and spin and it got out some of the lint. Also. they are evidently spun so hard in the washer, after they come out of the dryer they are a wrinkled mess. All the wash and wear, which is almost everything we own, is wrinkled. I have to iron every item. Never again a Maytag for us. If there is a class action suit, I want in on it.
Published: April 12, 2018
Nancy of Niles Ohio, OH
Source: consumeraffairs.com

My Maytag microwave caught fire and burned our cabinets and wall. We had ju
My Maytag microwave caught fire and burned our cabinets and wall. We had just arrived home from vacation and our fire alarm went off. No one was using the microwave at the time, it just caught fire. We put the fire out with the extinguisher and called the fire department. Our wall and cabinet are charred and our house smells of burnt plastic and is covered with the residue from the extinguisher. Maytag sent a technician to investigate the microwave and, just like the fire department, determined that the cause was internal within the microwave. A Maytag agent called us and offered us 10% off a new microwave and 15% when we told them our house had been damaged plus we wouldnt have to pay tax. Theyd even deliver and install it for free. According to my estimation, thats probably less than $50. They told me that the microwave had no value and tried to make it seem as though they were being generous. Its an 11 year old microwave but there should be some kind of warning that they spontaneously combust after a certain period of time. If the microwave had just stopped working because of age, that would have been understandable and I would have just purchased another the next day. Instead these microwaves just self-destruct and Maytag seems to be ok with that. I was not surprised that they had a 1.5 star review when I came here. I have 4 kids, ages 2-9, who wouldnt sleep that night because they were afraid of the microwave.
Published: November 28, 2018
Bobby of Atlanta, GA
Source: consumeraffairs.com

I purchased this washer from Lowe’s on 8/9/2017. After 3 years and 2 mont
I purchased this washer from Lowe’s on 8/9/2017. After 3 years and 2 months, this washer would no longer power up. I tried resetting it by unplugging it and lifting lid 6 times. It didn’t work. The extended warranty from Lowe’s expired on 8/9/20. I called a technician and he found it need a control panel and control board. He suggested that I call Maytag to see if they would give me the parts as a courtesy since the washer was only three years old. I contacted them and experienced long wait times (51 minutes was the longest). I spent a total of 3 hours on the phone with them. They said no there was nothing they could do for me since the manufacturers warranty ended 2 years ago and the “mother control panel” doesn’t fall under 10-year motor warranty. Well, there’s no need for a motor warranty if there’s no power to the unit! The cost of the parts would be almost $600. It is shameful to not stand behind your product. I would expect to have to replace an iron or a juicer after 3 years, but not a washer. This was a major blow to how I would view the way they do business. I purchased the extended warranty from Lowe’s. I will never do that again. It was a waste of money. They didn’t make any concessions for me either. They kept saying it was a manufacturers issue.
Published: October 26, 2020
Kim of Westland, MI
Source: consumeraffairs.com

We have had the same problem as everyone else. We have the freezer on the b
We have had the same problem as everyone else. We have the freezer on the bottom model. It started when the fridge was less than a year old, with water on the floor and ice buildup on the bottom of the freezer. Since then we have needed to have same repairman come at least 4 times because the top part suddenly gets very warm, food spoils, and water accumulates under the produce drawers. Our repairman has told us that newer models have improved design, but that doesnt help us. This fridge is now about 3 years old, bought it at Home Depot. This is unacceptable.
Published: September 21, 2015
Carol of Lincoln, ME
Source: consumeraffairs.com

We purchased a Maytag Bravos Quiet Series 300 in June 09. The dryer timer h
We purchased a Maytag Bravos Quiet Series 300 in June 09. The dryer timer has malfunctioned since shortly after purchase, it will add time near the end of the cycle, sometimes as much as an hour or more. We have had factory authorized repair firms (tried several) attempt to fix the problem both during the original warranty and extended warranty periods. They replaced the mother board twice and the moisture sensor on another occasion. All to no avail. Maytag has been worse than useless in the whole situation, and now will do nothing. It seems our only choice is to live with it, keep replacing parts, hasnt helped yet, or buy a new dryer. You can bet it will not be a Maytag!This situation is dangerous, if left unattended when the malfunction occurs the clothes and interior of the dryer get extremely hot. It is a potential fire hazard.
Published: November 2, 2011
Michael of Manhattan, KS
Source: consumeraffairs.com

Machine (Washing machine front loader model # MHW 5500 FC1) purchased Augus
Machine (Washing machine front loader model # MHW 5500 FC1) purchased August 2017. From the start Service Dept USA told me to unplug and re-plug anytime I had a problem as this problem started right away right after installation. In January it was getting stuck on the spin cycle. Unplug and re-plug to no avail. MAYTAG DO NOT have their own technicians just so you know. In the my area they use two subcontractors. In January they sent out the first sub-contractor from Appliance Wizards. He is a one man operation I later found out. As soon as he saw that I had a stacked washer and dryer he told me that this was my problem. He pushed a bunch of buttons on the machine, obviously re-setting the motherboard in a different way than unplug and re-plug and told me that there was nothing wrong with my machine. Not true. Machine was getting stuck again. Called Whirlpool service USA again. Told them not to send the same company. This time they sent JC Service. Excellent company. Kyle came out, identified that it was the motherboard. He claimed that they had other consumers with the same problem but that MAYTAG has corrected the problem and he went ahead and ordered a new motherboard. Waited 8 days and Kyle and another serviceman came and installed the new motherboard two days ago. Yesterday I put in my first load and the whole machine went dead. Kyle came again. He claims it is the motherboard again and he ordered a new one. I called Whirlpool service USA and spoke to Tina. All I wanted them to do is to ship my now, third motherboard quickly by courier so that I would not have to wait another 8 days without a washer. Her resolution was to extend my warranty by 6 months. I advised her that I had purchased a 4 year warranty but if they did not fix it so I can use it, even a ten year warranty would be of no use. So then she went and started reciting THEIR RULE OF LAW with regards to their protocol and told me that if needed they will replace my motherboard as many times as needed. She would not address sending the motherboard quickly. I asked for a supervisor several times and finally she agreed to put me through to the supervisor. She was worst than Tina. She agreed to check with the parts department and if possible she would ship it out by courier. I asked her to keep me on hold while she checked. She came back saying that they were not answering and that IN FACT they could not ship it out expeditiously. So, IN OTHER WORDS, SHE WAS LYING TO ME TO GET ME OFF HER LINE!!!! I asked her to give me the e-mail address of the EXECUTIVE OFFICE for Whirlpool. She claimed that she did not have their e-mail address and that the only way to communicate with them was by snail mail. I checked the internet and found a telephone number for the Executive office in Mississauga. I called them. The menu asked to push 5 for... get this... CUSTOMER EXPERIENCE... I pushed 5, followed by a bunch of beeps and a busy signal and disconnect. I tried 3 times. So there you go. This is their way of giving you a Customer Experience. Then I found a number for the Executive office in the USA. I was able to reach Latisha from the executive team and she assured me that if I were a USA resident she would have that motherboard shipped to be by courier right away. Because I am in Canada she was going to contact them to give me a call but that now I had to wait till Monday. 4 days to get back to me from Canada. Yet when it comes to service and parts, everything is arranged in the USA and everything comes from the USA because it is more cost effective for them. Who cares about the consumer. By then the motherboard will have left three days to arrive. 7 days take away 4 equals 3, take away a day for courier, depending on what time they call me on Monday, otherwise you have to take away two days, and then it will be all for nothing. But again, they must have so many complaints at the EXECUTIVE LEVEL, that they cannot call right away. So folks, note that Whirlpool has not recalled these machines with a defective motherboard, they are still selling them to unsuspecting consumers. They are not making an effort to send them out quickly or keep some in stock locally. BUT THE WORST OF ALL IS THAT THEY ARE REPLACING THE DEFECTIVE MOTHERBOARDS WITH OTHER DEFECTIVE MOTHERBOARDS!!!! This is outrageous!!!! I shall update my review once I hear from the very busy executive office for client care, and again once the new motherboard goes in. I shall post my order number and receipt when I update this review as my husband has all this and he is away. However I can give a work order number from service: **.
Published: March 9, 2018
May of Oakville, ON
Source: consumeraffairs.com

Approx. 3 year old Maytag Dishwasher Control Panel lights blinking with Dis
Approx. 3 year old Maytag Dishwasher Control Panel lights blinking with Dishwasher inoperable. Repair part (new Control Panel) costs approx. $180 plus tax. When you add the cost of a service repairman you are nearly at the price of a new dishwasher. I am completely unhappy with this Maytag Product and will never buy another Maytag Product again.
Published: November 6, 2014
kirk of Luling, LA
Source: consumeraffairs.com

This washer does not distribute enough water to wash clothes properly. I co
This washer does not distribute enough water to wash clothes properly. I continually take clothes out of washer that are not completely wet. My darker clothes have white spots of detergent on them that did not get rinsed off. This product should be pulled from the stores. We have tried everything, using deep water wash, bedding wash, to get more water in the machine. Our clothes are not coming out clean. Complete waste of our money!
Published: March 10, 2016
Kathy of Hudson, IL
Source: consumeraffairs.com

I could care less if Maytag responds as I have already advised all my famil
I could care less if Maytag responds as I have already advised all my family and friends to avoid Maytag products. After spending over $1200 to buy this refrigerator it took 6 months for the ice maker to failed, and it needed a control board replaced. Maytag had a great reputation; however, in the past 5 years their products are worthless. I also have a Maytag dishwasher which failed and was stuck on cancel with a flashing light. The dishwasher panel needs to be replaced and I have just decided to replace both of these products with a different brand.
Published: November 14, 2016
Donn of Charlotte, NC
Source: consumeraffairs.com

This review is for a Maytag dishwasher. I do not know the Make/Model. It di
This review is for a Maytag dishwasher. I do not know the Make/Model. It did a very poor job of washing the dishes. It may have been the city water, but no matter what I put into the machine to keep the dishes from being cloudy it never worked. It became disabled about a year after we moved in, and it was only about 6 years old. However, there were two families before me that used it and I have no idea how they used it. It was the first and last Maytag dishwasher I will ever use.
Published: January 8, 2016
Jerry Louise of Marysville, KS
Source: consumeraffairs.com

I had one set of Maytag washer and dryer and I loved it. I bought another s
I had one set of Maytag washer and dryer and I loved it. I bought another set and hate it. The washer smells and has been fixed a couple of times and the dryer is bad. I had to have a drum replaced because of one of the bars inside. I paid for the insurance but the bar was considered cosmetic. It has fallen off again after about 2 years and Im sick of it. I will never buy another Maytag again. Repairman, of course, had to order the drum and then I had to take another day off work to be here when it was delivered and one more to wait for him to come. I am so unhappy with this brand - never again.
Published: June 1, 2013
Peggy of Elmwood Park, IL
Source: consumeraffairs.com

18 months old washer breakdown #6 - I purchased a new out of the box washer
18 months old washer breakdown #6 - I purchased a new out of the box washer from Aarons model #MVWC7ESWWO and since Ive owned it, it has broken down repeatedly with the same problem - a water inlet valve. As a child seeing the commercial with the repairman with nothing to fix played a part in my purchase, I couldnt be more unhappy. With a family of five, there is laundry and not having a reliable washer does present a problem. I sent you this while waiting for the part to arrive from Sears. Sincerely, an unsatisfied customer.
Published: September 19, 2012
Steven of Meriden, CT
Source: consumeraffairs.com

Bought a Maytag front load washer. When it is operating it is very loud. So
Bought a Maytag front load washer. When it is operating it is very loud. Some parts of the washer are made of cheap plastic. The Optimum detergent dispenser also of cheap plastic failed after 1 month. Disappointed in finding out only the outside metal box was made in America. All inside components are made in China which raised the cost $300 due to recent tariffs.
Published: February 19, 2019
Corrine of Minneapolis, MN
Source: consumeraffairs.com

We bought a Maytag refrigerator two years ago with the front french doors a
We bought a Maytag refrigerator two years ago with the front french doors and bottom pull out drawer. We chose Maytag because we thought it was a name we could trust, a good quality merchandise. However, in the last two months, we started having problems when the fridge wouldnt stay cold, the freezer worked fine. We removed everything from the freezer and my husband found the freezer needed defrosting as the back of the unit was a solid sheet of ice. It took hours to defrost and we thought that we had the problem taken care of.. and that we wouldnt have to worry about this happening again. However, we have now had to do this three times in the last two months!! I love the style of this fridge..but am getting SO ANNOYED with having to rip everything out of the freezer and spending HOURS to defrost it! I have NEVER had this problem with any other fridge!! Im ready to replace it, but weve only had it for two years, and I shouldnt have to be spending a fortune on ANOTHER fridge after TWO years!!
Published: September 22, 2014
Richelle of Grantsburg, WI
Source: consumeraffairs.com

My washer (Performance Series 4000) needed new bearings about 6 months afte
My washer (Performance Series 4000) needed new bearings about 6 months after purchase. By the time the parts came in and after the A&E repairman rescheduled because he didnt know how to replace them, another two months had passed. Now, a year later and with no more warranty, the bearing needs replacing again! This washer is only 1 year 8 months old! The first repair cost well over $1,500 but was covered under warranty. There are hundreds of other people with Maytag washers having the same issues! Maytag is well aware of the defect and refuses to take responsibility. I would like to file a class action lawsuit against Maytag. Im in Tennessee. Please contact me. Thank you.
Published: August 21, 2012
Raya of Pulaski, TN
Source: consumeraffairs.com

Maytag Gemini - This is a double oven which I purchased in 2010. 2 days ago
Maytag Gemini - This is a double oven which I purchased in 2010. 2 days ago Apr 13, 2015, the outside glass in the bottom oven simply exploded. The oven was in use at the time. It blew the side brackets off and glass was spread into my dining room as well as a mess in the kitchen. Maytag was supposed to send repairman today. Have waited all day and finally called repair company. They knew nothing of the repair and supposedly will contact Maytag and call me tomorrow. We will see. In the meantime has anyone else had this problem?
Published: April 15, 2015
Fran of Niles, OH
Source: consumeraffairs.com

I bought a Maytag Commercial Technology Washer and a Bravos XL MCT Maytag C
I bought a Maytag Commercial Technology Washer and a Bravos XL MCT Maytag Commercial Technology Dryer in July 2018. On April 14, 2020 the control board went out and Maytag will not replace it. It’s going to cost $463.00 to get it repaired. I do not like this washer because it does not fill with enough water to get my clothes clean even with the deep fill cycle turned on. My clothes still smell nasty after they are dried with scented dry sheets. I will never buy another Maytag product, because they are cheap made. Maytag advertises as American made. Fact is they are assembled in America but the parts come from China and Thailand.
Published: April 20, 2020
Linda of Cookeville, TN
Source: consumeraffairs.com

Model MMV4205FZ3 microwave hood combination. No problems with open door sig
Model MMV4205FZ3 microwave hood combination. No problems with open door signal yet. However, light over the stove burnt out. When removing, it exploded.No didnt unplug first. Previous microwave didnt have a problem with this. Instructions are useless. Didnt say to unplug and doesnt provide a model number for the bulb. Consequently, we have now purchased 5 different bulbs and they dont work. Tested socket and power is going to it. Rep at Ace Hardware said he had heard about this happening several times and provided what was to be the correct bulb -- didnt work.
Published: January 7, 2019
Carol of Longmont, CO
Source: consumeraffairs.com

We bought all new appliances for our remodel. I wish I could return this di
We bought all new appliances for our remodel. I wish I could return this dishwasher. It has a problem with the door staying closed. I added images of how we are able to make it work. A service person is coming by tomorrow to put a new latch on it (I read several reviews saying the latch is messed up). So I made sure the service person is coming with the part. I called Home Depot when the problem started (used for up to 5 washes or so). And Home Depot wont return it! I called Maytag and they tried selling me an extended warranty and I asked what about the 10 year warranty the machine is supposed to come with? I guess thats a joke as the lady told me I should of read the fine print. So buyers beware! I wish I would of know about Maytag. I would have about a Samsung instead!!!
Published: May 22, 2016
Krystal of Des Moines, WA
Source: consumeraffairs.com

I purchased a Maytag model # MRT 18 FFFHO1 refrigerator from Home Depot. Af
I purchased a Maytag model # MRT 18 FFFHO1 refrigerator from Home Depot. After 7 months, it stopped cooling (wouldnt cool below 52 degrees). Fortunately, I had taken out a 5-year extended warranty. Thats the good news. The bad news is that after numerous trips by a certified repair man -- and three spring/summer months without reliable refrigeration -- Home Depot promised a refund. Well see.Bottom line: keep looking for a refrigerator that works. I have tried GE, Frigidaire, Maytag and Sanyo. Since many of these companies are really just one inept cooperation with more names than Frank Abagnale (Catch Me If You Can), let the buyer beware! I would give Home Depot protection plan 5 stars, though. They stayed with me through thick and thin: by emails, phone calls and text messages. However, their protection plan is worth more than Home Depots appliance products -- through no fault of theirs.
Published: July 30, 2019
Ralph of Canaan, NH
Source: consumeraffairs.com

Seems a little ** one of a small child crawled into the washer and a siblin
Seems a little ** one of a small child crawled into the washer and a sibling turned it on. We have been married 35 years and seen a lot of washers and this is by far the worst wash machine Ive ever seen. How would you rather do my wash in an old fashioned mangler? Very unsatisfied customer.
Published: June 19, 2015
rhonda of Dandridge, TN
Source: consumeraffairs.com

I am PISSED off at Maytag products in general. First I buy a washer and dr
I am PISSED off at Maytag products in general. First I buy a washer and dryer from a Maytag store-buy a 12 year warranty. Call in for repairs - Maytag and A & E say I have no coverage. Now I am getting bills to pay for coverage on both because the form says my coverage ends this December 2011. I buy a Maytag dishwasher and its the one that catches fire. I get the rebate of 250 for buying the more expensive one - but am still out 500 dollars. Installation was bad by contractors from Lowes - just called that in to have it reinstalled. AND THE MOST RECENT IS THE FRENCH DOOR REFRIGERATOR I BOUGHT 9/4/2010. IT STARTED ACTING UP AROUND CHRISTMAS TIME - WEIRD NOISES, WOULDNT MAKE ICE - I AM SO BUSY WITH MY MOM I DONT CALL IT IN UNTIL JUN 25TH AND THE REPAIR PERSON SAYS IT IS UNREPAIRABLE AND HAS INTERNAL DAMAGE TO THE WIRES.
Published: July 13, 2011
Jo of Roseville, CA
Source: consumeraffairs.com

Like the other poor reviews here- this Bravos top load washer is the worst.
Like the other poor reviews here- this Bravos top load washer is the worst. So wish we had returned it!!! There is never enough water in the machine on normal cycle to get all the clothes wet so how in the world would anyone expect the clothes to get clean? Just ridiculous - and whoever invented this machine, plus those who tested it, need to have their head examined! Hate it so much.
Published: August 11, 2018
dee of Your City, AK
Source: consumeraffairs.com

Maytag top loader washer will not complete cycles. Washer is only fourteen
Maytag top loader washer will not complete cycles. Washer is only fourteen months old. Repairman says parts will cost four hundred and seventy four dollars - almost what I paid for the washer.
Published: August 10, 2012
Robert of Massena, NY
Source: consumeraffairs.com

We bought a Maytag refrigerator serial # K11101146 and model # MBL2258XES1
We bought a Maytag refrigerator serial # K11101146 and model # MBL2258XES1 on 5/7/2011. We started seeing puddles on the floor about a month ago coming from the bottom freezer. The warranty on the refrigerator was only good for a year. We investigated it further online and saw that a lot of other people were having the same problem. We found a video on Youtube on the solution, which was to tear the bottom frig apart (which is a pain and takes about 3 hours to complete) and to thaw out all the ice accumulated on the coils and run hot water down the drain until that thaws out. It makes a real mess. Now we see that this will probably have to be done again and again from others online who are having the same problem. We never had this problem with any of our refrigerators or any problem with them for that matter. Our last one was a 15-year old Amana and we wanted a more energy efficient refrigerator. We bought this one at Home Depot thinking that this one would last us for the rest of our lives. We are in our mid 60s now. This should not be happening at all especially as much as we paid for the refrigerator. I contacted Maytag and they more or less said, “Sorry about your luck.” I hope something can be done about this, especially for the amount of complaints filed. Unfortunately I did not take pictures but if it happens again, which I understand from other complaints that it will. Thank you.
Published: December 27, 2012
Judy of Warriors Mark, PA
Source: consumeraffairs.com

Our Maytag Atlantis dryer had smoke coming out and almost had our house on
Our Maytag Atlantis dryer had smoke coming out and almost had our house on fire! Had it not for us double checking the entire house would have burnt down! The dryer is less than 10 years old and already it is tearing apart. I cant risk using it again. Terrible company. I would never buy Maytag products ever again!
Published: December 21, 2011
Irene of Philadelphia, PA
Source: consumeraffairs.com

Purchased new Maytag MF 2558 VEM5 for over $1000 and have had nothing but p
Purchased new Maytag MF 2558 VEM5 for over $1000 and have had nothing but problems. Water constantly leaking on floor, ruining kitchen wall trim. Now ice maker doesnt work. Bought in 2011 and started leaking after 2012 on out of Warranty. Now in 2014 ice maker stopped working. Bought at Home Depot who refused to fix. The worse fridge I have ever had.
Published: October 5, 2014
Laurence of Lapeer, MI
Source: consumeraffairs.com

I have had and worked on many washing machines over the years. The worst de
I have had and worked on many washing machines over the years. The worst design and complete failure of parts to easily align in Maytag front end washers is nothing short of staggering. Creating a tension wire to wrap a rubber seal that requires Hercules to install and easily tears the rubber is beyond ridiculous. Avoid front end Maytag washing machines like the plague since they may cause it given the mold and growth from excessive moisture when the seals tear.
Published: April 26, 2017
C. of Lincoln, NH
Source: consumeraffairs.com

We bought this Maytag Bravos XL machine in Sept 2016. It has never cleaned
We bought this Maytag Bravos XL machine in Sept 2016. It has never cleaned the clothes properly, you cant even tell they have been washed! It also shakes a lot. In January it shook so much it knocked a hose off, flooded my kitchen and downstairs bedroom. Home insurance had to pay to replace the kitchen floor and downstairs ceiling. We contacted Maytag. They said they dont have a repair person in our area. Home Depot wont take it back. We are stuck with no workable machine. We have to go to the laundromat and pay 70 a week for laundry, plus the time, and we are out all the money. We paid Home Depot (thousands) for a washer and matching dryer. Plus all the takeout we had to order while they repaired the kitchen, but the strain of this whole thing is ridiculous.
Published: February 11, 2017
Gloria of Bealeton, VA
Source: consumeraffairs.com

My husband and I bought a Maytag 3000 series front-loading washer in 2009.
My husband and I bought a Maytag 3000 series front-loading washer in 2009. In either December of 2014 or January of 2015 it broke down. We had a repairman come out. The inner and outer tubs and a bearing needed replacing. He said it would be expensive and some of the parts were no longer available. In his opinion he hated these new machines as they were nothing but problems. Next we contacted our dealer whom we bought it from. He contacted Maytag himself, then he gave us telephone number to speak with. He no longer carries this brand because of problems and said our washer was no longer made because of problems. So we call, spoke with several supervisors in customer experience. They offered half off another washer of similar value on Maytag or whirlpool brand. Maybe Im being difficult but I didnt plan on buying a new washer after 5 1/2 years. When I and my husband ask to speak to next person in chain of command we were told there wasnt one. Really!!! She would not pass us to a higher authority. She read a classic... Im sorry for your experience. Were offering you a great deal considering your warranty was out. Im hoping this will keep anyone else from this Bad experience.
Published: March 6, 2015
Debbie of Nacogdoches, TX
Source: consumeraffairs.com

This is a top load washer, commercial series, high efficiency without any a
This is a top load washer, commercial series, high efficiency without any agitator. It doesnt use enough water to break down the soap, no matter what soap or amount is used. Clothes come out of the machine with soap patches. It is also virtually impossible to balance the load so when it spins, it bangs and thumps and walks across the room until it shuts itself down. Stirring and re-distributing the load, changing the size of the load, small or large (should you actually fill the tub to a full load per instructions) it simply doesnt distribute or balance itself at all. At the end of the day, clothes need more water for extra rinse and then doesnt seem to work with soap removal all of the time. You cant put a load in and walk away and do something else or it will bang around and turn off. A waste of money and time. Save yourself, buy something else.
Published: May 2, 2018
Peter of Dowling, ON
Source: consumeraffairs.com

Our new refrigerator was pissing all over the kitchen floor. We had to disc
Our new refrigerator was pissing all over the kitchen floor. We had to disconnect the ice maker after an alleged repair part was supplied. (We had to pay a plumber to install it.) It didnt work, so we finally had to disconnect all the parts related to the ice maker. Here it is July, and ice cubes would really be appreciated right now. I get angry when I see all the Maytag commercials that pop up on the internet!
Published: July 3, 2016
C. of Hellertown, PA
Source: consumeraffairs.com

It's mounted above the stove, ten years old and still looks & oper
It's mounted above the stove, ten years old and still looks & operates like brand new. Have never had a problem with it and it's used almost daily. From heating up food to making dinner & popcorn. This is the longest lasting microwave I've ever purchased. Maytag made a great product.
Published: July 27, 2017
Larry of Chino, Other
Source: consumeraffairs.com

We purchased a Maytag dishwasher MDB7609AWS2 in October of 2010. It first s
We purchased a Maytag dishwasher MDB7609AWS2 in October of 2010. It first stopped working about 2 years ago. Since it was only 2 years old, we were disgusted and decided to let it sit and do dishes by hand. About 2 months after it had stopped, we tried it on a fluke and it worked. It stayed working for about 2 years. It finally stopped again, so we did the same thing, just let it sit. Every once in a while we try it to see if it works. It just recently started working again. We are wondering, what is up with this. We are not sure why or how the sitting works, and it is ridiculous that you have to have an appliance that you cant use periodically. We were too stubborn to have it fixed or buy a new one at this level of newness. We will get by in this manner for at least another few years, so as not to have lost all of our investment in a dishwasher, but we have sworn off Maytag appliances forever.
Published: November 18, 2014
Lynn of Foster, RI
Source: consumeraffairs.com

I have owned a Maytag gas dryer for 10 years now. I have had to replace the
I have owned a Maytag gas dryer for 10 years now. I have had to replace the idler and belt 4 times now. This dryer appears to be built as cheaply as humanly possible just to get it past its almost non existent warranty. The replacement parts are even worse. The idler has a bronze bearing in it as a wear item. Really??? Why was this never even considered as a part that could be lubricated at least occasionally?Granted, lots of people do not have any mechanical ability at all and just pay through the nose for a repairman to come to their place for any repair then pay dearly for the service but, I DO have mechanical ability so I do all the work myself. That is why I know firsthand about the terrible manufacturing results and the very cheaply built replacement parts available at outrageous prices.
Published: January 5, 2016
Glen of West Valley, UT
Source: consumeraffairs.com

My built in electric double wall oven, Model MEW6630DDB, convection on the
My built in electric double wall oven, Model MEW6630DDB, convection on the top, has been the most frustrating appliance I have ever owned. It has never kept an even temperature. It has been repaired several times and still does not keep an even temperature. It takes 14 hours to cook a 20 lb. turkey and baking cookies are not even an option. I have complained to Maytag and have paid for repair services. Their solution buy an extended warranty which is absolutely insane because they havent been able to repair it since it was new over four years ago.
Published: November 22, 2011
Marcy of Freedom, PA
Source: consumeraffairs.com

July 2018 I bought a new Maytag electric washer and dryer. After one mo. th
July 2018 I bought a new Maytag electric washer and dryer. After one mo. the enamel inside the dryer started come off in sheets. It was replaced with 2019 model which after 3 mos. wont come on unless you unplug it and plug it back in after using it. I am now waiting for Maytag to send a repairman to come look at it. Steer clear of Maytag front load electric dryers.
Published: April 26, 2019
Elizabeth of San Antonio, TX
Source: consumeraffairs.com

This model MGR5875QDW range is very difficult to use. When you press broil
This model MGR5875QDW range is very difficult to use. When you press broil for instance, the display says set. There is absolutely no indication of how to set. Therefore, no broil. The same thing happens when you try to use the clean function. It is virtually impossible to use the control panel; it is just too difficult. Therefore, most of the functions are not usable.The kicker though is that the handle comes off. During the extended warranty period, a technician came out and fixed it. The toughest part of this job is to get the oven door back on. I tried for 2 hours everything I could think of. Then, I got an idea to use Maytags live chat. They told me that I would have to call for service and pay for a service call to get the door back on. I told them that their clean cycle is too painful to use, so I am assuming I am not the only one who has removed the door to clean the oven. Pay for a service call every time I want to clean my oven or fix their defective handle design because the handle falls off every 2 years? That is not acceptable.
Published: October 5, 2012
Kay of Layton, UT
Source: consumeraffairs.com

I saw something on your website about Maytag Neptune class action suit back
I saw something on your website about Maytag Neptune class action suit back in late 2005. I have owned one, never was notified of the settlement, and saw this since I have a mildew problem also in my washer. They are not willing to do anything about the repair on my machine, but send out someone and make me pay for it. Since I bought it in 2002, I would want to know why was I not included in the repairs and why wont they honor me in this since I am the machines original owner. Help, I worry that I am not having clean clothes and it is contributing to illness due to mold spores!
Published: October 17, 2011
Alyson of Wimberley, TX
Source: consumeraffairs.com

I purchased a Maytag (as Maytag was always rated the Best) and from the sta
I purchased a Maytag (as Maytag was always rated the Best) and from the start was not happy with the product. I contacted Maytag (Whirlpool, the makers of Maytag) and was told to get stains out, you had to pre-soak and scrub the area... really? Then I might as well just hand wash all of my clothes and hang to dry. I would not need a washer. My clothes do not come clean at all. DO NOT PURCHASE A MAYTAG (or I think any washer Whirlpool makes as they do not back their products).Prior to this, I had a Whirlpool washer with agitator and loved the washer. Clothes were always clean, and I did not have to pre-soak stains for them to come clean. Go Figure! I have never been so disappointed in a washer or company. I am now looking to purchase a new washer as I have had it with this one... and it wont be a product made by Whirlpool.
Published: July 2, 2013
Carey of Sault Ste Marie, ON
Source: consumeraffairs.com

I have an HE Maytag Bravos X washer and it cleans very well. But compared t
I have an HE Maytag Bravos X washer and it cleans very well. But compared to my previous washer, with an agitator, I like the old one better and the clothes came out of the washer far less wrinkled. I would not buy another HE machine, given the choice.
Published: February 8, 2019
Sue of Oro Valley, AZ
Source: consumeraffairs.com

Maytag Oven MGR8670WS1 - Purchased in the Fall of 2011 (along with a fridge
Maytag Oven MGR8670WS1 - Purchased in the Fall of 2011 (along with a fridge... also faulty the freezer stopped working within a year). Ive had the oven stop working twice (in 2012). This week (spring 2014) would be the third time. It seems to be a faulty ignitor already replaced having to be replaced yet again. I have never used such faulty appliances EVER and never AGAIN. This is absolutely ridiculous.
Published: March 8, 2014
Tasha of Ridgewood, NY
Source: consumeraffairs.com

I purchased this refrigerator 1 1/2 yrs. ago. The refrigerator stopped gett
I purchased this refrigerator 1 1/2 yrs. ago. The refrigerator stopped getting cold about 3 months after warranty expired. I called Maytag company and told them how disappointed with their product and also how angry I was after spending $1500 only 18 months ago and now it is useless! They kept asking me if I bought the extended warranty and I said I didnt think I would have to after buying a brand new product. And then it breaks so soon!! And now they want me to spend an additional $359 to get the warranty... what a racket! She told me to look under the fridge for leaks. Sorry I cant, Im disabled. She said too bad and would have service man call me but that would be even more expensive. Woops, disconnected.
Published: March 21, 2016
Jay of Manchester, NH
Source: consumeraffairs.com

Maytag Bravo washer and dryer delivered 2 days ago.My complaint is with the
Maytag Bravo washer and dryer delivered 2 days ago.My complaint is with the washer. I didnt know it was HE and that it requires special detergent! I didnt know the lid locks! I didnt know when I push the hot water button, the machine mixes in cold water! Complicated, delicate machine and not user-friendly. I dont expect the washer to last long.
Published: August 12, 2011
Crain of Bronx, NY
Source: consumeraffairs.com

We purchased our Maytag Bravos just under two years ago. Over the past mont
We purchased our Maytag Bravos just under two years ago. Over the past month or so, we noticed the spin cycle was getting louder and louder. Today we had the service man come out. He informed us that our 2-year-old machine will require new bearings and a new basket, which equates to over $700 in repairs. The repairman said he has seen more and more of this with these high efficiency washers. He suggested that anyone buying these new washers be sure to buy the extended warranty.I for one am completely disappointed that one can spend that much money for a washer with a two-year shelf life. I personally think this is planned obsolescence created by the manufacturers. The serviceman also said the LG versions of these washers have a large increase in electronic problems. Be warned, we have very few choices these days so buyers beware.
Published: March 15, 2014
John of Livonia, MI
Source: consumeraffairs.com

I think it would be nice to state on the box of dishwasher that customer ma
I think it would be nice to state on the box of dishwasher that customer may need a water connecting fitting and hose for their new dishwasher. Yes, I was asked if I needed anything else and I replied I dont think so! Well when I got home, I did need the water supply sweep 90 degree elbow. Or tell sales people to inform there are parts missing. I had to drive back to Huntsville, AL from Hazel Green. Not life or death, just saying! I do like Maytag products. The dishwasher I replaced was17 years old and we had good service! It’s just starting sounding like a rocket motor. Time to upgrade, I thought. Well my wife really thought so! ;)
Published: November 19, 2013
Chuck of Hazel Green, AL
Source: consumeraffairs.com

I have a Maytag dishwasher; a nylon roller for the upper rack cracked. It i
I have a Maytag dishwasher; a nylon roller for the upper rack cracked. It is held in place by a hex head screw. The roller is about $1.75. Maytag will not sell me the roller. I have to buy a complete rack adjuster assembly for $46 to replace a small nylon roller that screws in. I have had these problems before with them. I guarantee that I will never buy another Whirlpool-manufactured appliance. This is ludicrous!
Published: May 14, 2013
Mike of Mullica Hill, NJ
Source: consumeraffairs.com

My Maytag MDB7749SAW0 Dishwasher starting acting up after around the first
My Maytag MDB7749SAW0 Dishwasher starting acting up after around the first year. The lights on the Control Panel began to flash uncontrollably and it will run all day while I am at work. I called Maytag and they were nice but did not repair it because the warranty just ran out. The person on the phone said that it is a common problem with knob-less dishwashers, the humidity causes problems with the control panel. The cost to repair was over $300 to replace the control panel.
Published: August 14, 2018
Eric of South Lyon, MI
Source: consumeraffairs.com

I just purchased this washer in Feb. 2012. The motor had gone out in Oct. I
I just purchased this washer in Feb. 2012. The motor had gone out in Oct. I called Maytag Service, they came out to repair it. In Nov., it was doing the same thing again. I called Maytag Service, and they sent someone out to fix it. They expected me to take off from work where they inconvenience me with this washer. It is a reject washer. They would give me another washer and not consider people having to work and cant take off for their reject washer. They said as long as it is under warranty. I feel that I should be able to get me another. This washer has given me problems since I had it.
Published: December 3, 2012
Karen of Louisville, KY
Source: consumeraffairs.com

I had to replace a washer & dryer which was destroyed in a fire. We los
I had to replace a washer & dryer which was destroyed in a fire. We lost everything. I was hoping a new set would last me many years. Boy, I was wrong. Maytag Bravo washer is the worst by far. I havent even had it 4 years. I had a plumber in 4 times already. The pump keeps breaking; it doesnt drain properly. It appears that dirt is entering the clean laundry and the laundry has to be washed again. It looks like I have to research for a new washer. It wont be a Maytag. They are thieves!
Published: December 12, 2011
Janice of E Weymouth, MA
Source: consumeraffairs.com

So our 4 year old Maytag Dishwasher just took a crap. Thank God we were at
So our 4 year old Maytag Dishwasher just took a crap. Thank God we were at the kitchen table when it started to smoke, which smelt like burning wires and unplugged it immediately. Repairman came out and said it would be a 3 to 4 hundred dollar repair. What happened to the great 10 year Warranty? Oh yeah, its a limited warranty which does not include wiring. Could have burnt down my 4 year old home, but thats ok, not covered. The good news, the upper arm I replaced due to wear and tear would have been a free repair, because it would have been covered! No more Maytags in this home, ever!!
Published: December 31, 2019
Roger of La Crosse, WI
Source: consumeraffairs.com

I just saw that there had been a class action lawsuit settled in 2005 for t
I just saw that there had been a class action lawsuit settled in 2005 for the Maytag Neptune front load washer and I was never notified as an owner! I have this crummy product and have been living with it for more than 10 years! I just scheduled a repairman to replace the moldy gasket (for the second time) and the noisy pump, and a latch that has to be slammed for a sum of $438. What a crock. I was told this was a top of the line model when I purchased it for $999. Ive never had such a piece of junk before in my life. I run loads of bleach weekly to control the mildew.
Published: September 23, 2012
Sharon of Willoughby Hills, OH
Source: consumeraffairs.com

Does not clean properly! Water level is too low for clothes to move around
Does not clean properly! Water level is too low for clothes to move around properly. This appears to be a very poorly engineered product. We have had Maytag products for many years. The only good thing I can say about this product is that it beats a scrub board. Would not recommend Maytag product to anyone. Looking at other complaints it appears that Maytag is doing nothing about this. Will try to sell this at a yard sale and hope no one asks my opinion. Then go buy something that works.
Published: September 25, 2016
Gary of Poca, WV
Source: consumeraffairs.com

I just bought my Maytag Range model #MGR8700DS2 in August 2016. Bought Mayt
I just bought my Maytag Range model #MGR8700DS2 in August 2016. Bought Maytag because I always thought it was one of the best with the best warranty around. Now I am not so sure. After using it the first time, found that when you are baking anything in the oven the burner control knobs get very hot. That is because they designed the knob area to be right above where the heat vents out from the oven door. The knobs get so hot that you almost burn yourself if you touch them. This is a bad design in my opinion especially if you have any kids around. Even the sides of the oven get way too hot. This is also bad because of the tight spacing to your cabinets. I contacted Maytag about this and got a OH WELL kind of reply to my problem. You bought it and you are stuck with it. I would not recommend buying this model to anyone.
Published: September 5, 2016
Steve of Richfield, WI
Source: consumeraffairs.com

I bought this machine about a yr ago. My clothes come out so dirty white sp
I bought this machine about a yr ago. My clothes come out so dirty white spots all over my clothes. Now my bills are higher. Because I cannot afford another washing machine I have to bring them to the laundromat. I saved my money a long time to buy a washer and now I am without one and still paying for this piece of tin that does not work... If I ever get a chance to buy another one it will not be a Maytag. Trust me never never never again!!!!!!!!
Published: February 16, 2015
VERA of Quincy Mass , MA
Source: consumeraffairs.com

According to Maytags manual Odors and smoke are normal when the oven is use
According to Maytags manual Odors and smoke are normal when the oven is used the first few times... Exposure to the fumes may result in death of certain birds. What about humans? I had serious respiratory problems and the industrial-level fumes lingered after dozens of uses. Neither the upper nor the lower ovens are calibrated. Upper oven baked at 325 when digital readout said 350. Lower oven had to be set to 365 to cook at 350. (After several puzzling baking disasters I bought an oven thermometer.) YOU are supposed to calibrate it yourself with cryptic instructions and a lot of trial and error.
Published: May 18, 2015
Linda of La Jolla, CA
Source: consumeraffairs.com

I was always impressed with the front loading spin washers commonly found i
I was always impressed with the front loading spin washers commonly found in laundromats. The top loading Maytag Bravos does a great job of cleaning clothes and does not stick another door in your way when loading or unloading it.
Published: May 18, 2020
James of Kent, OH
Source: consumeraffairs.com

I also purchased a Maytag dishwasher a few years ago. It has never worked t
I also purchased a Maytag dishwasher a few years ago. It has never worked that well. We had a repairman come out once to replace the control board but the problem soon returned. Interestingly, we found that if we wait long enough until the control panel is in the mood, the dishwasher works again and the control panel responds to button pushes, until the problem returns.I dont recall what model I purchased but it seems to be irrelevant. From reading the other customer complaints, its quite obvious that all Maytag dishwashers inherently have problems with their control panels and Maytag intends on doing nothing about it. I guess the extra repair costs that their customers have to pay for their defective products brings in some additional revenue to Maytag, so theres no real motivation for them to fix their ** products.
Published: September 6, 2011
David of Nashua, NH
Source: consumeraffairs.com

I bought a Maytag Centennial Top Loading washer 2-1/2 years ago. Its worked
I bought a Maytag Centennial Top Loading washer 2-1/2 years ago. Its worked very well, but has started to roar so loud on high-speed spin that you have to leave that side of the house to be heard. The factory technician determined that it had a bad gearbox and that it wasnt anything I had done that caused it. He told me it was going to cost more for parts & labor than the machine was worth. I called Maytag and was told they wouldnt help me because it was after the one-year warranty. When I asked for a supervisor, he offered to pay for the parts, but not the service. Thats kind of like Chevy offering to pay for the defective engine part, but not the installation. I have never bought a major appliance (or even a hair dryer) where I thought 3 years was a reasonable life expectancy. Lifelong Maytag Customer has left the building.
Published: June 19, 2019
Peter of Burt, NY
Source: consumeraffairs.com

First off, everyone seeing this should be fuming as I am because we are mos
First off, everyone seeing this should be fuming as I am because we are mostly in the same boat with these control panel issues. Mine is Maytag model MDB7749SBM3 about 575.00. A little bit cheaper than most of you because I purchased at the online and had a rebate. About a couple months after the warranty expired, we started having weird light issues with the control panel where are one light would pop up when you didnt hit it or other lights would pop up when you hit something else. We kept dealing with it thinking that it would dry out and resolve itself. Lo and behold, just like it appears to be tens of thousands perhaps hundreds of thousands of machines, it quit. I read this consumer affairs post after it quit and now I know why it did. I opened up the control panel and sure enough, the little ribbon that connects all the electrical connections had brown on the back like it was burnt through. I was able to find a special 1 800 number that Whirlpool has set up because they have purchased Maytag and the woman I spoke with said they would send a technician out and that I was responsible for the diagnostic fee. I was born but it wasnt yesterday. I immediately said to the woman, Absolutely unacceptable. I am NOT paying for anything, very politely highlighting the fact that I know they settled a class action lawsuit in California regarding a control panel issue and there are hundreds maybe thousands of complaints on consumer affairs.com. The woman place me on hold, I am assuming to speak with her supervisor and then let me know that they would pay for the diagnostic fee. She said a repair date for me for about a week and a half later. The repairman had a good day because the dishwasher was already disassembled for him and he proceeded to take pictures and call Maytag. Maytag told him that I was responsible for the installation cost and service fee which according to the technician is about a hundred bucks. I told the technician that is fine but it will not be fine when I call Maytag back. I have not spoken to Maytag about the hundred dollars needs to file a claim for a new dishwasher and associated damages. I have not spoken to Maytag about the hundred dollars but I am only on this to let you know that every single one of us needs to file a claim for a new dishwasher in associated damages in small claims court. I plan on filing a claim for approximately $700 for a new dishwasher and damages. In my opinion, I feel like we should all do this, otherwise big corporations like this will continue to shovel garbage into the stores left and right.Have a good day and good luck with your court case hopefully. With all the evidence against them, I have a feeling that they will settle this and pay before the court date even comes around. Good luck to all of you. I will try and update this after I call Maytag back for the hundred dollars that they are going to charge to repair their broken part.
Published: January 12, 2016
Paul of Winchester, VA
Source: consumeraffairs.com

Visa MasterCard

Site Secured By The Website Guardian
TOP