Smeg and Dolce&Gabbana join creative forces to create a truly Made in Italy project where experts from the worlds of high design and fashion meet and merge to create unique domestic appliances that uncover an Italian story.

Dishwasher Error Codes

CODE: E1 or E9  
PROBLEM: Overfill Issue 
FIX: The flood protection system has been activated which means the water level in your dishwasher has reached a higher level than it is supposed to. This could be caused by a faulty valve that lets water into your machine, a blocked filter stopping water from draining or excessive foaming as a result of adding too much detergent. 

CODE: E2  
PROBLEM: Overfill Issue 
FIX: As above this fault occurs when the water level in your dishwasher is too high. E2 errors are likely to be caused by the pressure switch, the part which monitors the water level in your dishwasher. Check the switch itself and the wiring and connections between the switch and the control board. 

CODE: E3  
PROBLEM: Dishwasher Not Heating 
FIX: If the water in your dishwasher is not heating as expected the most likely cause is a faulty heating element which you’ll need to replace. This error code can also be caused by faulty wiring or connections between the heating element and control board. 

CODE: E4  
PROBLEM: Faulty Temperature Sensor 
FIX: The temperature sensor monitors the temperature of the water in your dishwasher. Check the sensor itself and the wiring and connections to it and repair or replace as necessary. 

CODE: E5  
PROBLEM: Dishwasher Not Filling 
FIX: If your dishwasher has not been able to fill with water the inlet valve that lets water into your machine could be faulty. It’s also worth checking that the tap that connects your water supply to your dishwasher is on completely and that the inlet hose is not kinked or squashed. 

CODE: E6  
PROBLEM: Dishwasher Not Draining 
FIX: A dishwasher that has been unsuccessful in draining water could have a blocked filter or pump. These will need cleaning out to allow water to leave your appliance. The pump could also be faulty, in which case it will need replacing. 

CODE: E7  
PROBLEM: Flow Meter Detected 
FIX: This error code indicates that a flow meter (the part in a dishwasher that monitors the amount of water coming into the machine) has been detected when there is not one fitted in your dishwasher. This fault could indicate an issue with your control board and your machine may need to be reset according to your user manual.

Dryer Error Codes

No Error Codes For This Product At This Time.

Drying process takes too much time 
Meshes of the filter may be clogged. Wash with water. 

Laundry comes out wet at the end of drying. 
Meshes of the filter may be clogged. Wash with water. 
Excessive laundry might have been loaded in. Do not load the dryer in excess. 

Dryer does not switch on or the programme does not start. Dryer is not activated when set. 
It might have not been plugged in. Make sure that the machine is plugged in. 
The loading door may be ajar. Make sure that the loading door is properly closed. 
Programme might have not been set or the "Start/Pause/Cancel" button might have not been pressed. 
Make sure that the programme has been set and it is not in “Pause” mode. 
"Childproof lock" might have been activated. Deactivate the childproof lock. 

Programme has been interrupted without any cause. 
The loading door may be ajar. Make sure that the loading door is properly closed. 
Electricity may be cut off. Press "Start/Pause/Cancel" button to start the programme. 

Laundry has shrunk, become felted or deteriorated.
A programme suitable for the laundry type might have not been used. Dry only the laundry which is suitable for drying in dryer after checking the labels on your clothes. 
Select a programme with suitable low temperature for the laundry type to dry your clothes. 

Drum lightning does not come on. 
Dryer might have not been started by using the "On/Off" button. Make sure that the dryer is on. 
Bulb may have blown. Call the authorized service to replace the bulb. 

“Final / Anti-creasing” symbol flashes. 
The 2-hour anti creasing programme to prevent laundry from creasing might have been activated. Turn off the dryer and take out the laundry. 

“Final / Anti-creasing” symbol is on. 
Programme has come to an end. Turn off the dryer and take out the laundry. 

Water comes out the cover. 
Clean the entire inner surface of the cover and door gasket. 

Cover opens spontaneously. 
Push it until you hear that it is closed. 

For products with a condenser: 
“Water tank” warning symbol is on. 
Water may be full. 
Anti-creasing programme might be running. Drain the water in the tank. 

“Filter cleaning” symbol is on. 
Filter might have not been cleaned. Clean the cover filter. 

“Condenser cleaning” symbol is on. 
Filter drawer/Condenser might have not been cleaned. Clean the filters in the condenser/filter drawer under the kick plate

Microwave Error Codes

No Error Codes For This Product At This Time.

The message "S E C U" is displayed. 
Cancel the security : open then shut the door and press the START key. 

The time counts down, but the appliance does not function (the turntable does not rotate, the light does not come on and the food is not heated). 
Press the TURNTABLE OFF key for 5 seconds. 

The microwave oven is noisy when operating. 
Adjust the front left foot. Clean the wheels and the well area beneath the turntable. 

Condensation forms on the door glass. 
Clean the vents under the appliance. 

The grill element smokes when heating up. 
Clean all cooking residue from the grill element. 

The turntable does not revolve correctly. 
Clean the wheels and the well beneath the turntable. 

The microwave programmes do not produce the desired results. 
Clean the vents under the appliance. Make sure that you use only containers which are suitable for microwave cooking. 

The appliance produces sparks. 
Check whether the wheel support is correctly positioned. Thoroughly clean the appliance: remove any greasy deposits, cooking residue, etc... Move any metal objects away from the oven walls. Never use metallic containers with a rack.

Range Error Codes

CODE: E0 
PROBLEM: Temperature sensor open 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: E0 
PROBLEM: EEPROM Error 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: E0 
PROBLEM: Potentiometer Error 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: E2 
PROBLEM: Input referring to temperature sensor missing 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: E2 
PROBLEM: Door block that does not lock / unlock 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: E3 
PROBLEM: Short-circuited temperature sensor 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: FF 
PROBLEM: Unknown Error 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: F 
PROBLEM: Unknown Error 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: F1 
PROBLEM: Input referring to temperature sensor missing 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: F3 
PROBLEM: Temperature sensor open 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: F3 
PROBLEM: Short-circuited temperature sensor 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: F4 
PROBLEM: EEPROM Error 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: F5 
PROBLEM: Door block that does not lock / unlock 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums. 

CODE: F8 
PROBLEM: Potentiometer Error 
FIX: We add more information as we learn so if you can't find what you need please ask in Smeg's Repair forums.

Refrigerator Error Codes

CODE: Sr  
PROBLEM: Failure warnings. Appears when one or more of the refrigerator parts fail or there is a problem in the cooling system. 

CODE: LF  
PROBLEM: Freezer compartment is not cold enough. This warning appears if there has been a power failure for a long period and when the refrigerator is operated for the first time. 1- If your frozen food is thawed, consume them as soon as possible and do not freeze them again since there is a risk of putrefaction. 2- Temporarily increase the freezer temperature setting to the desired level or switch the appliance to fast freezing mode. 

CODE: LP  
PROBLEM: Low voltage. Refrigerator switches to the standby mode when the voltage supply falls below 170 Volts. This feature prevents the compressor from getting damaged due to low voltage. Refrigerator will start operating automatically when the voltage restores to the required level. 
 

Washer Error Codes

CODE: OPEN  
PROBLEM: Check the closure of the porthole and relating indicator in case it is open 

CODE: E1  
PROBLEM: Display shows the safety device for water loss has tripped 

CODE: E2 
PROBLEM: Overflow engaged (only out of a washing program) 

CODE: E4  
PROBLEM: Water temperature probe in short circuit or interrupted 

CODE: E5  
PROBLEM: As water is being loaded, if the pressure switch does not reach the full level within the first 6’ the display shows the problem 

CODE: E6  
PROBLEM: If during water drain, the empty level is not reached in 12’, the display shows the problem. 

CODE: E10  
PROBLEM: Motor over-current 

CODE: E11  
PROBLEM: Problem of motor control triac (short circuit or interrupted) 

CODE: E12  
PROBLEM: Indication for tachymetry mal-functioning. 

CODE: E13  
PROBLEM: Malfunctioning of door block PTC 

CODE: E14  
PROBLEM: Dryer temperature probe in short circuit or interrupted 

CODE: E-  
PROBLEM: Communication problem between interface board and mother board. 

CODE: E-  
PROBLEM: Board hardware problem