We purchased our microwave several years ago. It runs great and still looks great too. It was very reasonably priced which made it a great value. It has all the bells and whistles you would expect on a more expensive model.

Purchase date 4/20/15; Model # GDT 580 SMF ES; Serial # VD776355; Dishwasher wasnt installed until the end of June upon completion of a complete kitchen renovation. Eight months later, on March 1, 2016, the dishwasher was leaking water all over the kitchen! I initiated a service call and the repair man replaced the seal and it has worked without leaking until April 13, 2016. AGAIN a very large amount of water poured out of the left side of the door. The repair man had to return 3 more times and finally didnt have a leak for almost another year. Now, June 1, 2017 my kitchen is once again flooded. This machine is garbage - Very expensive garbage. Dont waste your money! I had previously purchased from Sears and never had a water leak in a machine that was 20 years old.

After a year and 1 day of use the microwave blew out and got in fire. Fortunately I was nearby and was able to extinguish the fire. I called the customer service that told me the warranty was over and all they can do is give me a discount on the purchase of another unit, and that I was on my own for the collateral damages due to the fire!

My microwave is a GE, model JE 1040 made in 1998, which they probably dont make anymore. I use it several times a week, mostly to heat up leftovers and water. Also pre-packaged microwavable meals, such as breakfasts and biscuits. I have cooked different kinds of meat and other items in it many times and am completely satisfied with it. I would be lost without it.

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

When the handle on my expensive replacement (GE Profile for GE Profile) microwave/convection oven peeled, we called our retailer (PC Richards is really good about service). A new door showed up and it, too, has a plastic handle. The difference is, this time its solid grey plastic as opposed to white plastic with silver paint. Seems to me that an expensive SS appliance should have an SS handle. Too heavy? Just use a tube of SS - not solid. Too hot if above burners? Didnt my last GE Profile micro/convection have a SS handle? I spoke with customer relations. The person was well trained not to say anything that might suggest she agreed with me. Since the issue is cosmetic and not functional, I have to consider the issue dealt with now that the door has been replaced. I told them I will do my best to publicize this issue and that I will never again purchase a GE appliance. I also called CEO Jeff Immelts office in Connecticut. I made it clear that my dissatisfaction has cost them a long time, loyal customer and that I would spread the word. I would appreciate if anyone agrees with GE that a SS handle would be too hot over stove burners.

The side panel of our built-in GE Profile microwave 1999 caught on fire when my daughter was using it. It had a faint glow behind the metal plate. Then, it became flames quite quickly. A flash and pop was the ultimate end before we turned it off during the test. It had been working fine until the fire. This is a definite safety issue. Now that I know the microwaves have been faulty, it makes me concerned about the GE Profile electric stovetop burner. I have noticed it gets extremely hot and doesnt seem to want to turn off!

I recently purchased a GDT696SSFSS Serial #SWGF800933C GE dishwasher. From the moment I tried to use it there was a leaking water to the floor from the back wall. I contacted the store that referred me to GE stating that their role ended when we received the dishwasher (long story..). I called GE service and when they came the technician said needs seal mat and offered to repair (the dishwasher has been installed in the garage since the water that comes out flood the kitchen floor and we cant afford having the floor damaged). But I had no faith whatsoever in this dishwasher (I was told if the problem happen again and damage my floor they will only offer to repair the dishwasher and I have to go to the insurance to repair my floor) or GE and said I wanted my money back. They did not even offered a replacement. It is still a brand new machine, I never use it.

The looks are ok. It works great, not too noisy. Wouldn’t mind replacing it with a different color and apparel. It fit great over the oven and is a space saver. Cleans up well, not too hard to clean. Not sure of the exact price, but I remember it was very cost efficient

The microwave oven that I’ve been using works real well and it’s not that expensive. It’s also a convection oven at the same time. The only reason I didn’t give it a 5 is, I rarely give that high # to anything with rare exceptions.

I bough a GE microwave oven, model JVM1740SM1SS, less than 2 years ago. The keypad says that it is shorted out and needs service. It turns on randomly. I unplugged it and plugged it back in, and it will either say, service needed, keypad shorted out or press clock.GE has so many complaints about there microwaves, some that are very serious. They still claim that there are no problems with them. They have to know there are problems, but do not want to issue a recall and take a financial lose. Its only a matter of time, before something so serious happens that it will be a bigger financial lose than a recall.

Sometimes there are dishwashing detergent (powder) left on the dishes. Nothing extra, very basic, it has regular or pot scrubber cycles, air dry or heat dry, a slot for dry rinse liquid, detergent slot, short wash cycle, upper rack, lower rack and flatware basket. Came with the house purchased 17+ years ago. White body with black upper control panel the entire width of the dishwasher. It is still in very good condition, but then I take care of everything, always rinse everything before placing them in the dishwasher. Never needed service yet.

Just bought a Monogram dishwasher one week ago, and the front sound barrier fell off. The service man came out, took a look, and said it was not a big deal. I questioned him why it fell off within such a short period. He stated that it was GEs policy: to make Monogram quieter than competitors, they put in sound barrier in front. However, it fell off often. Since it does not affect how the dishwasher work, GE does not believe that it is a big deal. Therefore, no need for quality control, and he will use new glue to glue it back. No guarantee that it will not fall off later... What is GE stand on the engineering products any more? Will never buy any more GE product...

We recently purchased a new GE microwave and are pleased with its service and price. The microwave is attractive and seems to be constructed well! We would buy another GE product and feel that they provide quality in appliances!

GE Profile microwave Model: PEB7226SF1SS came as part of the builder installation. In the first year had issues with the microwave not starting intermittently and had to call GE support who sent in a technician who had to work on the door alignment and the switch was the problem which said to have fixed. About 2.5 year from purchase the heating seemed to be irregular which we did not take much notice and then it stopped working completely. We called GE support and did get the usual routine of the product being out of warranty and have to pay for the technician. While scheduling they realized they did not have a their own service person in the vicinity and was advised to reach out to local service person.Local technician diagnosed that the magnetron has gone bad and advised most manufacturers have 10 years warranty on the magnetron as they are supposed to last for a long time and I should reach out to GE. Having reached out to GE support again to our surprise were advised that unlike most manufacturers this product did not have 10 year magnetron warranty. Customer service, part service and customer relations kept redirecting to each other. GE does not provide an option to sell the replacement magnetron to the customer and now want their authorized center to be engaged and paid again to have the part ordered and installed. Disappointed with GE product quality, their stand on warranty compared to their competition and their service which has given me run around and no solution. I have written to them asking for solution which they havent responded yet.

My dishes always come out clean & the glassware always sparkles. I can use normal, heavy or light cycles. I can use heat to dry the dishes or turn that feature off & let them dry themselves. I think its just a normal size. Its white & matches my other appliances. This is the first GE Brand that Ive ever had. Ive had KitchenAid & Frigidaire models in the past and this one is as good as the others were.

Purchased an entire line of GE appliances for kitchen after having prior (still working) appliances for 13 years. Have had at least 5 services calls and countless emails and phone calls for non functioning Dishwasher. Here is response from GE Manager: I have reviewed the pictures and no I would re-wash those 4 dishes if they came out of my dishwasher prior to using them with my family. Dried on fruit, starches and dairy are tough for any dishwasher to take off as the sugars in them act like glue. Again for these types of foods we would highly recommend more pre-washing to make sure that they are not left on the dishes after the dishwashing cycle. CAUTION: DO NOT BUY.

Microwave Model JVM1750DP2bb defective construction- Plastic is protruding inside the Oven. Took possession of a new home in January 2014, but only occupied part time. I estimate we had the equivalent of 6 months being occupied. In January 2017 the magnetron broke down, at which time I noticed a piece of plastics protruding inside the microwave through a vent hole on the Magnetron side. I did not take the extended warranty and GE only offered to send a repair man. Since this is an over the stove model venting outside, it had to be repaired or replaced. Checked with the supplier and they estimated a minimum of $ 300 repair cost. Home Depot had model JVM6175DKBB on sale for 249.00, and with delivery, and installation, were talking $ 350.00 to $400.00 to replace. I got in touch with GE Consumer Affairs, and they did eventually agree to provide the JVM6175DKBB for $ 270.00 including installation. They will take possession of the old model, so there wont be any way for me to confirm or deny a manufacturing defect.

I loaded and ran the GE Profile dishwasher in the evening. Later that evening, putrid odor of undetermined origin was noted in the house. I searched throughout house to find the cause, but it was not located. The next morning, the dishwasher was found to be extremely hot on the outer surface (door) and countertop. The heated dry light was on along with the start button, which would not reset or turn off. The unit had to be disconnected by turning the electrical breaker off. All contents were either melted or had a strange brown film, along with broken tines and melted silverware rack in the dishwasher. Even the water dispenser in the bottom of the dishwasher was melted or broken. A GE service representative was called and his report stated: Unit was left on for too long and heat caused excessive damage to the product. Due to excessive damage, unit is non-repairable. He shared with me he had never seen this much damage done to a dishwasher. I spoke to GE consumer advocates twice and their solution is to provide me a discounted price on a new appliance and the email address for formal complaints. When I inquired about if there had been resolution to the cause of this problem because I wanted to make a formal complaint, I was told there is not a safety issue with the heating unit. I then spoke to a GE resource person in recall and she shared with me that it is a known issue of overheating and destroying contents, but it has not caused a fire. Igniting a fire is a justification for a recall - can we not be proactive? This department is working with me and ensured that in newer models this potential hazard does not exist. But other consumers who have purchased in this model (PDW9280N20SS) should be aware of the potential fire hazard. Everything was very hot inside and out. Consequences: the 3-year-old dishwasher (that I use about once per week) was totally ruined and I inhaled potentially toxic fumes for over 8 hours.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

Ive had my microwave for 12 years. Ive never had any problems with the microwave since its purchase and very pleased. I dont plan on replacing until the microwave would stop operating or not pleasing in the kitchen.

GE brags about employing its own service technicians yet, when I called to schedule an appointment to fix our Advantium 120 microwave (3 years old), they told me that unless I provided proof of purchase to the technician, he would charge me even for parts under warranty such as the magnetron tube. This in spite of the fact that they have all the purchase information at their fingertips, as I reported when we registered our purchase. They even told me our date of purchase, had our address, email address, etc. They dismissed my suggestion that an email from them to me that I could show the technician should suffice. After 3 years and severe family health issues, I have sadly misplaced the proof of purchase, not realizing that registering the appliance for warranty provided no real benefit; not even proof that I didnt steal the thing. I am saddened that a company of the former stature of GE would stoop so low to avoid a legitimate warranty repair.

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

We have a GE built-in combination oven and microwave. The oven gets up to heat very quickly and bakes in less time than recipes call for baking. The microwave is an 1100 watt unit and performs equally well, and has for 29 years, Our cook top is a GE glass top unit, installed 11 years ago in a kitchen upgrade, performs equally well, though not quite as fast heating as our old gas unit but much cleaner and attractive. Have never required a service call on any of this equipment!

This is a very nice brand of microwaves. Has easy touch from 30 sec to 10 mins. Meaning you touch start for the 30 sec and press 1 for one min - just hit start after. The only bad thing is the plastic coating over the buttons is starting to rip. Not a big deal just doesn’t look as nice.

Purchased a GE profile dishwasher two years ago. It stopped draining. After 4 service calls and $400 we had to buy a new dishwasher. Basically I threw $1000 down the drain. My recommendation is do not buy a GE dishwasher!!!

I bought a GE PEB7227 Profile Microwave and after 6 months the door latch breaks. Service tech comes and says, Sorry parts are back ordered for 3 months (including new frame due to damage done to it getting the thing open). I call GE customer care. Explain that its obviously cheaper to drop ship me a new unit (and I will waive the new frame) than all of the parts, frame and a second call to fix the unit. Their answer, buy a new unit at a discount or simply go without a microwave for 3 months. Add me to the list of victims trying to warn others to NEVER buy a GE product.

We have had our GE microwave for at least five years. We have moved multiple times and had the power go off but through it all, our GE microwave works just as good today as it did when we first bought.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

Im very upset with my self for not doing the proper research on this product. I cant imagine a dishwasher being worse than this one. From day one, it never cleaned; half the dishes are always dirty. Some soaps work better than others. Still dirty dishes. We paid nearly $1000 for this machine, and once again, it has backed up. I will do my research next time. Their service department tried to tell me it was because it needed to be cleaned. GE never again! I have a busy family, and there is nothing more frustrating than having a dishwasher and not being able to use it.

First Profile microwave/oven caught on fire. Was replaced. Front panel on Profile refrigerator not reacting to touch. Repairman said that this model had problems. Fixed it - cost over $100.00. Dishwasher (Profile series) not worth the cost of heating the water to run it. Cleaned dishes by hand. Stove top died - not reacting to touch. $90.00 for repairman to visit us, and another $60.00 to tell us what was wrong. A lot of money for inferior products.

After a year and a half the dishwasher stopped draining. A $231 service call removed the three corn kernels and one watermelon seed that caused. See it all the time says the happy repairman. Another good example of why not to trust GE. Mrs. Gs sales and service complicit in the deceit.

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.

My husband and I replaced all the appliances in our new home 4 years ago with GE Profile double oven, cooktop and built in microwave. All the appliances are of poor quality and do not cook the way we are accustomed to. But the microwave has had a particularly bad history. Within one year, it completely quit working and we had to replace several fuses and a board. Over the past couple of months, the keypad continually quits working and we have to climb up on a stool, unplug the microwave to reset it. Only then will it work for us to heat something. However, the keypad does not accurately reflect the task we are trying to use. I have had many microwaves over the years and I have NEVER had to repair one before. This particular brand of microwave was produced in Malaysia in July 2008. Very, very poor quality. No resolve from GE or from Sears where we bought it. I am done with GE and with SEARS.

We bought a GE dishwasher after owning a KitchenAid. The GE is quieter, washes better, takes longer, but it doesnt really matter. I use Quantum tablets and everything is always clean when we are done.

All I wanted to do was eat dinner with my husband and I wound up on the internet for an hour trying to figure out how to make our microwave work. There is some kind of thing that locks you out of using it. Very frustrating when you just want to eat dinner!! Nothing works and you have to google how do you unlock this piece of crap that you paid good money for and trusted the GE label. All we ever use is defrost food or time cook vegetables. If you want a complex computer, go for this thing. Otherwise, I suggest you go for a simpler microwave that you can depend on to work.

I have a 2011 GE Model # JES1456BJ05 microwave and it has been gently used and kept clean. Upon cleaning today I noticed that the top of the inside is blistering and peeling off. Surely this is not safe as it could fall into food, plus they should make them to stand heat, after all this is why they are made for heating things. I called GE who informed me that there is no recall on them so I am pretty much stuck to go out to buy a new one with no help from them. I now read that this has happened to people before. Lesson learned never purchase a GE microwave as they do not stand behind their products when a manufacturing problem develops if you are the first one to call, and beware and ready to buy a new one every 2-3 years. This is all they are made to last!!!!!

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

5 years ago I updated my complete kitchen with Adora LG appliances. To my dismay, the handle on the microwave (Model DVM1950SR1SS) began peeling like paper. Now I have a white plastic handle that’s supposed to be stainless steel as an eyesore in the middle of my kitchen. When I called GE replacement line, I was informed the handle was $164! My 5 year old kitchen is out of date! As far as I’m concerned this is a defective part and GE should replace it at no charge. I have been a faithful GE purchaser for many years. After this mishap, I will no longer recommend GE appliances or will I purchase them.

Bought a new GE dishwasher. Arm on top keeps falling off. Does not heat dry. Dishes do not come out clean. Had repair man out four times, still not fixed. GE junk, junk. Will never buy GE again.

RCA RMW953-White 0.9 cu. feet Microwave, 900-watts, 10-power levels, end cooking signal, glass turntable, 6-one-touch cooking menus, speed and weight defrost, cook by weight. Bubbles obscure text. I wanted a white microwave with a door handle, .9 and fairly powerful. I was glad to have found this microwave. But I dont know if the hole was there before, or my teenagers or I inadvertently put a small hole in the plastic covering over the control panel outside the microwave (NOT meant to be removed, I asked support) but now its become a larger hole as air got underneath. I cannot read the button text. I tried to cover it with scotch tape and thats not working.I searched and found out this is a common problem with GE microwaves. The buttons are very close to the bottom and therefore, countertop, so if you have a utensil or plate or something that sits near the microwave, it might nick the plastic coating. I called GE support (in India) and they said since its under warranty, I can return it. However Id have to pay shipping costs. Fortunately, I bought this at Wal-Mart (I hate to support this store but it was the only place I could find this style) and they have an excellent return policy and there is no charge for shipping. It was easy to call and request a shipping label within the generous warranty period. You might save yourself the trouble of a return or be very careful to not put a small hole in the plastic coating. Again, this is not protective coating for shipping, this is a permanent coating to protect the buttons.

My 11-month-old GE Advantium oven no longer has any display, totally blank. When calling to make an appointment I was unable to speak to a live person but scheduled one for today from 1-5 pm. At 5 pm I received an automated call that the technician was running behind and would arrive in about an hour. By 8:30 pm no one called or came to repair my oven. At 4 pm when I was wondering if I would see a repairman I attempted to find on the internet a phone number that would connect me to a live person but had no luck. I have no idea what company is being sent out to make the repairs so that I can get in touch with them. Their service sucks.

It has been a remarkable machine: reliable and efficient! I have had my General Electric microwave since 2001. It has never given me one day of trouble. The size is perfect and the heating mechanism has been flawless.

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

I just remodeled my kitchen back in May of 2012. My wife and I started looking for the appliances and we decided to get the GE Cafe series set (dishwasher, cooktop, electric oven and microwave). Our microwave oven, model CVM1790SS1SS, developed a humming noise as soon as you closed the door. It does sound like the magnetron is on. To verify that, I filled a cup with cold water and I put it inside and closed the door without setting any cooking time. After three minutes, the water was too hot to touch. I called GE and told them that it was a fire hazard.They sent one of their technicians and he determined that it was not a fire hazard and if I wanted it fixed, I have to pay for it. How could he say its not? If I close the door, the oven is going to continue heating up until it burns itself and everything else around it. I am pissed at GE because this unit is barely one year old and expensive. This is a safety hazard and GE failed to acknowledge. Bottom line, Ill never buy GE again and will not recommend it to anyone.

We bought a GE dishwasher a little over 3 years ago. In the last week of September we awoke to the smell of hot or melted plastic. We found the source to be the dishwasher. I had loaded and started it before going to bed the night before. The counter-top above the dishwasher was stove top hot and upon opening the dishwasher found that a cutting board that we have had for many years and have always put in the dishwasher had melted on top of the heating coil. Dishwasher safe items on the top rack melted as well. It had been drying for at least 9 hours. After pulling the dishwasher out we saw the heat shield had melted and was crumbling. We contacted GE, sent them all the pictures and they told us it was not a safety issue. We have no doubt that if we had not woken up so early we would have had a fire in our house caused by the dishwasher.

I bought this over the range microwave in 2009 to go with my other Cafe appliances (dishwasher and range). After a few months, it stopped working and ge sent a repairman to fix it under warranty. He took it apart, replaced the touchpad panel, but told me that the old panel was still good and that I could keep it for the future in case I needed it. And I did. It stopped working a year ago. I took the whole machine apart, put in the original touchpad, and it worked. Until about a week ago. I went away on the Fourth, and when I returned 3 days later, I had the same problem for the third time. I just called ge service and was told that the replacement for the touchpad is $600. When I started to say that I could buy two Microwaves for that amount, the ge service person cut me off and asked if she could help me with anything else. Rude. In addition to this, the Cafe Range ($3000) has three unusable knobs because they were made of cheap PLASTIC and are cracked.They just spin and turn nothing on. When the third one broke, my wife had turned on the power boil and was unable to turn it off until I came home 2 hrs later. A huge FIRE HAZARD!! To replace the six knobs is, you guessed it, $300. I could buy an inexpensive stove for that. I have purposely used ge in lower letters because that is the way I feel about their appliances and their service.

Have a GE dishwasher put into operation June 2016 (new home). In Oct 2016 we noticed a leak and a serviceman came out and identified a loose soap dispenser - tightened it. Next time we used it, leaked as before. Same serviceman came again, this time replaced both the main seal & spinning water distribution wand assembly. Again, the unit leaked and on Dec 14th same serviceman replaced the soap dispenser. Before he got too far down the road, we called as the unit again leaked. He blamed it on excessive soap suds - which he removed manually. Following his departure, we again experienced a leak. Same serviceman returned on Dec 15th. After review, he advised us the DW would be replaced and we should get a call within 48 hrs to arrange. On Dec 17th (still no followup from GE) the DW leaked again - we video this time. On Dec 19th called customer relations and after much discussion it was apparent GE has NO CLUE what the heck they are doing. ONE MORE repair trip was scheduled - this time they would replace the inside and outside panel! We are fortunate to be retired otherwise this repair process would have cost us about $2000 so far! How idiotic is GE?? How much have they spent to avoid replacing this unit? Believe me this is the LAST GE appliance we buy from them. Dont know how they stay in business. We are awaiting the panel repair guy as of this writing. Will update once this service has been completed.

We bought 3 GE Profile appliances in 2005 when we renovated our kitchen. We have not had much problem with the gas oven/range/stove. We have, however, had nothing but problems with the microwave (which I submitted a separate review for) and the dishwasher. Recently, a friend made some suggestions regarding the dishwasher. I then went online and watched some tutorials on troubleshooting my dishwasher problems. I tried all the new suggestions and the dishwasher worked OK the one or two times after that and then back to all the old problems: 1. We have to scour every dish until its nearly clean before loading (even though the instructions specifically stated no pre-rinsing necessary). 2. I am not sure the soap cup opens. The soap is always left caked in the cup resulting in running the dishwasher twice. We have tried all kinds of various soaps and they all do the same thing. The eco-friendly soaps are the worst. We strive to be eco-friendly, but how can we be if we are using the harshest soaps possible AND running our dishwasher twice?! Not to mention the pre-rinse scour and running water until it is 120 degrees prior to running.3. The dishwasher also leaks and is very noisy.I have read some other reviews on this product and realize our dishes are not always dry at the end. This is a non-issue for me. I dont care so much if the dishes are dry. I do prefer for them to be clean. Dishes are a task I do not prefer to do. It would be nice to have a functioning helper. I am grateful the thing hasnt caught on fire. I saw that this dishwasher currently sells for $800-$1,500. I cannot believe it. I wouldnt spend $100 on this piece of junk.

GE built-in oven with microwave on top in white color, model no. JKP90CMICC. Microwaves outside door is peeling off in chunks. This is a manufacturer defect and I have contacted GE to see if they will stand behind their products quality and replace this door of the microwave. I have heard so many negative things about GE customer service so I dont have much hope but I have to pay to replace this poorly constructed door. I will never buy another GE product and I will spread the word on how they treat their customers. I will post again when and if I hear back from them.

I purchased a GE monogram microwave along with all the other brand new appliances when I remodeled my kitchen. Let me be clear when I say I will never buy another GE product again in my life. Not only is the product inferior but the customer service department is run by a group of very inept people that lack basic communication skills. The microwave I purchased needed two repairs within the first five years of purchase. I have a microwave in my office at work that I purchased over 10 years ago and Ive never had an issue with it. Needless to say, it isnt a GE product. Last April the microwave started acting up again and kept turning itself off. We didnt even bother calling GE because like everything else their repairmen are also incompetent. 1-800-Appliance came out and found that the magnetron needed to be replaced and we should just purchase a new appliance. Because our microwave had been installed in a custom made cabinet and the trim kit was still good, we made the mistake of purchasing the same exact microwave from GE for convenience. This was in April of 2014. Right now I am waiting for a GE repairman to come and take a look at it because it is already not working. This is after I spent an hour on the phone with consumer relations. I will never purchase a GE product again.

I purchased a dishwasher and it doesnt dry the dishes. It leaves the dishwasher and the dishes wet. I was told they have a fix. However, nothing has been done. If you want wet dishes, dont buy. They told me to raise my water temperature on my hot water tank and to run my sink water until it goes hot. They told me to buy Rinse Aid. Well, I did it all and it still doesnt dry. This is an energy saver appliance. Ha, ha, its because they are saving energy at our expense.

My life partner/bf moved into a semi flipped 10 yr old home. Every single appliance required to be replaced, everything from refrigerator, stove/oven, to dishwasher. We researched every appliance we purchased, a lot of time and effort along with reviews from various reputable reviewers, pointed us to the GE GDT DISHWASHER. Who can go wrong with three tier washing amongst jetted water bottle washers?After a 1 1/2 yrs in the top spinner completely separated from its housing. We googled the problem, GE said it was a faulty design, yet no recall. The door lock began to fail, googled the repair fix, another fault design, yet again no recall. Upper plastic door trim broke in half, solution, replace the entire console. Guess what? My solution here on out is to not buy GE products. If two years is all you get with a GE product, I am out! Done with your products that once lasted 10 to 15 years. The fact that have to research another DISHWASHER, absolutely pisses me off. I dare you GE to win me back!

Very easy to load. Controls are easy to read. Very quiet operating and does an excellent job cleaning utensils and all pot and pans. Have used for 8 years with no issues.

I purchased a GE Profile Microwave 2 1/2 years ago and now it is shooting sparks out the back and making a loud noise. I have to admit that the microwave did work well and my mom even bought the same one because it was good. I never bought a GE appliance before because I was told they have a bad reputation. I thought the Profile Series would be better. Wrong!

My husband and I enjoyed our 1980s White GE Microwave and Stove/oven. But, after 15-20 years with the same appliances, we finally saved up for upgrades and purchased a new Stainless Steel (mid-range priced) GE Microwave and stove/Oven. I cannot begin to describe our disappointment. The Microwave is above our Stove/oven. Our old microwave had two powerful lights underneath it - one on each side. This microwave provides one small, weak light that does no good any time of day. Why would GE go from two great lights to one middle useless one? Also, the faint white numbers on the front keypad of the microwave are barely visible during the day - forget about seeing this when the light is not perfect. I foolishly assumed these numbers would be backlit on a black background. Onto the Stove/oven. The temperature is not accurate but that is something we can deal with. After the oven is pre-heated, the assigned temperature stays on the display pad - NOT the actual time. Who cares about the temperature you set the oven to - dont we all need to know when to check or take out our food? Our last oven always showed the time. We did not join the Stainless Steel bandwagon 10-15 years ago when others did - which we thought would be good for GE to get some kinks out. I Guess we should have waited 10 more. Proper lighting on your Microwave and The time on your stove/oven while cooking are not too much to ask for when we just dropped at least 2-thousand dollars!!!!!

Installed 07/06/2015 While I was asleep on 12/09/18 the oven appeared to start microwaving an empty oven on its own. When I came down 5 hours later the microwave had no power. I opened door and turntable had melted and glass had exploded. The ring under it was burnt and melted in one location. Top of cabinet on right side was hot. Then the internal circuit breaker restored itself and started some recovery process making odd noises sounded like the magnetron was trying to run since the top was getting hotter, after a minute the internal circuit breaker shut it down again. I then unplugged it. It appeared the magnetron started heating on its own and turntable did not rotate. All of the heat was concentrated at 12:00 edge of glass turntable. It also burnt the metal floor under that spot.

I purchased the model (PEM31SM1SS) GE Profile (Spacesaver oven) in November of 2008. Less than a year later, it overheated and failed. Since it was still under warranty, the repair was managed by the appliance vendor. The scorch mark on the rear wall of the oven was and is still there. During the past year, the paint on the interior roof began to bubble and peel. There is now a broad area of exposed metal and the paint around the interior door frame is also peeling. When I returned to my vendor, I was informed that several other customers had the same issue and was told to call GE. I also checked online and found many other complaints for the same thing.When contacted, GE offered me a $75 rebate voucher, applicable only if I buy another GE microwave. The current price for this model - the only one anywhere that fits the space - is $279. Even with the voucher, this is still a lot to pay for a product that has proved to be defective. GE does not appear to stand behind its products. It used to be a reliable company but given the issues Ive had with both this microwave and my expensive dishwasher, I will be looking elsewhere in the future.

Wife started using the microwave. Within a minute she smelled something burning. She opened the door and a flame shot out. Thankfully she remained at the microwave as it was running. Could have been catastrophic if the microwave continued to run for another minute. There is a charred 2 inch section at a circular piece in the inside top of the microwave.

About two years ago I moved into my condo and as a housewarming gift my sister gave me money to buy a microwave oven. I bought a GE over the range microwave. Well it quit over two months ago - really disappointed. I bought the next one but now after reading all these similar experiences I am sorry I bought the same problem.

The defect is in the Gas Control and Thermal Coupling, per my licensed plumber. GE tells me my water heater is still under warranty; therefore, I would like an authorization code to have it replaced by Home Depot where it was originally purchased. Home Depot tells me I need GE to give me the authorization code. BTW, your CS rep was very helpful. She is sending both items to me, but I prefer to have a replacement for the cost my plumber will charge to install parts in a questionable product. Thank you.

I bought a brand new GE Dishwasher GDWT308VBB delivered October 3, 2012 which promised: 5-stage filtration with Piranha hard food disposer, 5 self-cleaning filters ensure clean dishes, dedicated silverware jets, highly pressurized spray jets target the silverware area for improved cleaning; steam prewash - loosens tough soils before any cycle virtually eliminating the need for soaking or pre-rinsing dishes; auto wash cycle - cycle automatically adjusts to soil level to maximize energy savings and ensure clean dishes; natural convection heated dry option, a drying element effectively dries dishes reducing the need to towel dry after unloading; 52 dBA sound level - nearly silent two-pump system cleans dirty dishes without disruption. No matter which cycle or combination of features I use, my dishes have yet to be cleaned. Contrary to advertising above, I do need to rinse dishes prior to cleaning in dishwasher and also rewash dishes after dishwasher cycle is completed. I previously had a Maytag which at 15 years old performed better than this new GE Dishwasher. I have written GE describing my dissatisfaction and expect their promises to be delivered.

The paint started peeling on the inside ceiling area of the microwave the end of the first year we bought it. I called GE and they claimed this was not harmful to the operation of the microwave. It was disgusting to have paint chips falling onto food we were cooking. Now almost all the paint is gone and there is some rust too. How can this be for cooking and what if some of the paint is accidentally ingested? If GE did not replace or offer to repair the problem. Stay away from GE microwaves is my advice.

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

If you plan to use your dishes for food or drink or if your pets eat food from bowls, dont buy a GE dishwasher if you expect items to get clean. Seems entirely incapable of producing grit-free clean dishes. Is particularly noticeable on the glasses. And I clean the filters all the time (manual recommends periodically) and I am taking a break from cleaning said filters to tell the world that GE Dishwashers are junk.

We remodeled our kitchen and bought full line of GE café appliances which we have not been happy. Microwave screen cracked in the first three months; refrigerator is at max cooling but still does not cool or freeze enough; dishwasher has never cleaned well and marks my dishes with gray streaks and its control panel quit working and had to be replaced. They said that it was my soap, water etc., even though it never happened with previous dishwasher. All this in the first ten months of ownership of a couple with no family at home. Servicemen were nice and polite but their products are crummy. Dont buy them.

My experience with GE over range microwave oven as follows/ Unit Mod.JVM3160DF3WWW. Ser.#GH260692A, this unit was purchased April 2017, February 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. No satisfaction from GE, NO extended warranty purchased, guilty as charged, contacted elect. tech. No idea of problem, #2 elect. problem in door sensors of which there are numerous, notice black residue on duel latch on door caused by door latch device rubbing on unit latch receiver cost to discover which sensor cause and replace one or all 250.00.We have been limping along for two months with frequent trips to basement resetting breaker (which we had replaced) next move, purchase NEW MICROWAVE. Let me be very direct if we wanted JUNK we would buy Asian made, THAT being said, there will be NO...General Electric products in this house. This is our second GE product BUST, 100.00 advertised by manufacturer. Never delivered! But hey we are just small time consumers. What might else we expect.

We did not choose our dishwasher. It was installed by the builder but its served us well for the last 3 years. Its good quality and cleans the dishes well. It is also relatively quiet while its washing.

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

We bought a GE Profile micro/convection oven in December 2010 (model # PEB1590SM). It was working great until 11-19-2012, when the panel on the right side started to glow bright orange, then burst into flame. I thought my wife was goofy, so I tried to heat a cup of water. It was the same thing; the panel glowed bright orange and then flamed. We waited a week for a GE tech to visit. He said the wave guide is burnt. Its non-repairable so were waiting for disposition from GE service. There wont be another GE micro in this house. P.S. - Were still waiting for the GE case manager to call back after leaving three messages.

I bought a Moffat washer and dryer, and the timer came out of place and burnt on the inside. The timer clips in and if push too hard it will fall out or break the clip. We have extended warranty on it and due the repairman came out twice. The warranty person said it cost more for the repairman than the dryer worth - theres no more warranty. I think the dryer should replace when the timer fell out of place. This dryer should be called back.

DO NOT BUY GE APPLIANCES. The quality is terrible even on an expensive dishwasher. I bought a $700 dishwasher in November 2016 and in April 2017 it was broken, parts not available, but after fighting with customer service, they sent me the parts at my house. No one is available to come over to install the parts, the parts are sitting at my table. I guess they want me to install them myself. I even had purchased a 5-year warranty. Customer service is non existence at General Electric. I know I will never purchase a GE product ever again.

I bought this dishwasher GLDT690TBB-00 on 05/12. Its not even 2 yrs old. I had some minor complaints about how hard it was to fit bowls, how the utensil rack wasnt easily accessible, how long the cycles took, how it had to be vented right after a cycle to keep clean dishes from smelling musty... But I was willing to put up with that. I spent about $700 new. The dishes did come out clean, if I stacked them properly. I only used it when full, about 2x/week, as I am an aging widow & live alone. It stopped functioning a few days ago. Control panel lit up, a little water came in, but no action with spray, etc. Called a local repair company today. They say the control panel is shorted out, and that in turn burned out the motor. The repair cost would have been $524.61. REALLY? Not doing that! Very disgusted. Ill never buy GE again. Last KitchenAid lasted 12 yrs, but as all the repair guys say: They dont make em like they used to! Too many bells & whistles. All I require is clean dishes, and for the appliance to do its job.

GLD6560L00SS. My dishwasher (Model number:GLD6560L00SS) was producing large amounts of smoke through the face panel. It filled my kitchen with smoke and produced a strong smell. I contacted GE and they sent a service repairman out and he took a look. He said this problem is very uncommon with this specific unit and he has never seen something like this. After he removed the front panel, we were welcomed by a burnt/charcoal black face-plate. There was an internal fire in the machine. To fast forward I have been working with GE the last 3 weeks and they have offered to cover 50% off a new unit. I cannot afford this even with a discount and they will not cover the cost of a replacement. This problem could have been much worse if I was not home. The house very well could have started on fire. We normally set the unit at night and go to bed... Thank god this was a different day. This kind of thing is unexceptionable and the fact that they will not cover.

I contacted by phone GEs customer service department (800-386-1215) on 2 separate occasions. The most recent was on 2/18/13. About 4 1/2 years ago, when we purchased our new house, we bought all new GE appliances for our kitchen and laundry room. My biggest complaint is with our dishwasher. The top and bottom racks are rusting and most of the prongs have broken off as a result. This should not happen for an appliance that is only about 4 1/2 years old. Their response was that I could purchase both the top and bottom rack. Why would I purchase the same racks only to have it happen again? Clearly this is happening because they used a poor quality steel.There was a recall not too long ago on our dishwasher and the service tech who came out to fix the recall couldnt believe how badly the racks have rusted. I understand there is no warranty; however, you would think or hope that the racks would last a lot longer than 4 1/2 years. I am very disappointed in the quality and the lack of help regarding this matter.

GE Profile dishwasher - model # PWD8280N00SS - Appears that moisture got between the exterior panel and door that houses that main board. Because of the moisture caused a short that melted the main board, with harness and the ribbon from the on/off panel that connects into the main board. Luckily I was home at the time or this could have caused a significant fire damage in my kitchen.

We purchased a complete kitchen of Profile appliances. Everything is fine except dishwasher! The first one didnt clean food and left scum on everything... The company sent service several times replacing many parts.... finally gave us a new one... It still doesnt clean. It will not remove peanut butter, avocado, and my teacups are perpetually stained dark brown. My old dishwasher, Kenmore, left my dishes sparkling... no matter what was on them, plus I didnt have to run my kitchen sink to get hot water first! I will not use GE in my next house which will be built in about 3-4 years.

Im very pleased with this microwave. Size appearance and price were right on point. This has a built in turntable with presets that actually work! It is an easy to find product and available thru quite a few retailers.

I have an above the range GE microwave oven, model no. JVM1750M1CC. It has been in service for about 9 years. About 6 months ago it stopped working with an F3 code. The code claims the control panel needs to be replaced. I found that the price of the control panel was over $100 and the service call was at least $100. A little shopping around and I found I can purchase a new oven for about the same price. As the control panel is located just above the largest burner where water is usually heated to a boil, it receives a lot of steam. I visited a local church second hand store and purchased a countertop microwave and used it while I found a good solution. I decided to let it dry out for a few days and lo and behold it worked again. Unfortunately it only worked for a few hours, sometimes a full day and then I needed to let it dry out some more. I purchased an extension cord with an on/off switch and hooked it up. Now I can stop the electricity without having to climb up on a chair to pull the plug. Once I was set up with the easy on/off switch I could easily reset it. After about a week of resetting, it got the message. It has been working properly for over two weeks now with no failures.

I thought there were food particles between the glass plate and the ring. When I took out the plate, I saw that the paint had bubbled and was peeling off the bottom of the microwave. Extremely unhappy with this. Ive had hand-me-down off brand microwaves that lasted much long than this GE and with NO PROBLEMS until they just rolled over and died. I have all GE appliances in my kitchen and have to say that Ill never buy GE again. Electric stove is a problem, dishwasher a problem. Refrigerator was a problem (when it was new! it was fixed and thankfully is still running well).

As a landlord I have about 20 GE microwaves. I have had 8 handles break off in the last few years including the one in my house with me pulling the door open. Standing straight in front of it, just pulling regularly. Replacement plastic handles - just two pieces of injection molded plastic - selling from other companies for as little as $10 are $130.00. $130.00! There is a clear design defect here and the companys solution to it is to charge $130 for the plastic replacement part. Someone should go to jail. Literally. Please include me in the class action lawsuit.

Microwave oven 2008 - The food doesnt go around anymore. The glass insert does not turn. What can I do?

The GE dishwasher (model number GLD9312P02SS) I bought about 3 years ago is not cleaning properly because the screening that keeps the bits of food out is disintegrated, and apparently, the part to fix it would cost over $300.00. I will never buy another GE product again.

Our Spacemaker microwave, which was installed over the stove August 2008, suddenly stopped heating food. My husband called GE, and their phone advisor advised us the microwave was under warranty. She said her computer screen showed our product registration, and she also saw we owned three other GE products. Fast forward, the GE repairman came and said the microwave repair cost would be around $400. The heating part wasnt under warranty nor was the labor. Mind you, the entire microwave (new) was under $400. We called the GE service center, and they refused to honor what their representative had told us. The most they offered was 50% off. I dont accept the premise that a new appliance should only last four years. I will replace my unusable microwave with a competitor’s brand and will pledge never to purchase a GE appliance again. I will also sell my GE stock, for I now understand why its going nowhere.

Purchased a GE Profile (oven and microwave unit) for over $3000.00 seven years ago. The protective coating on the interior of the microwave completely wore off down to the metal under the wheels of the turntable. GE calls this minor chipping (which it is not), advises to stop using the product, and offers a $100.00 off a new GE unit because they cannot fix it. The product should be recalled, just like Honda did when their Pilots were peeling.

We purchased a new GE dishwasher from The Brick, after three washes it leaked all over our new hardwood floors. I called The Brick and they said it was GEs problem. I called GE and they sent out a repairman who told us it was a broken seal on the pump and that this dishwasher is discontinued and he cant get the part. So, that would mean GE would have to replace our washer with a new one! We went back to The Brick and told them we did not want the GE washer and wanted to replace it with another brand as we were within the thirty day guarantee. No apology or well pay for the damage to your floor (floor is warped underneath) and guess what Im still waiting for a call back from GE!! Dont buy anything made by GE. You will regret it! As well, I will not be shopping at The Brick anymore.

Our General Electric Dishwasher does a very good job of cleaning and drying our dishes. It does these jobs very quickly and quietly. We have had it for about 5 years without any problems or repairs. I would recommend our dishwasher the General Electric Profile for home use. Several of our friends and neighbors recommended this dishwasher when we bought it.

I purchased the micro from Sears. This is the replacement for one that was provided by the builder. The G.E. now needs replacement. Will work for limited periods of time. I have used it more than my stove to cook chicken, beef and whole meals. I will be replacing it with a new G.E.. The current one has lasted more 10 years with very heavy use.

Today my GE black microwave with rack mounted above the stove, caught on fire by itself. My husband and I smelled a chemical like smoke. We went in the kitchen and we saw fire in the microwave. We put out the fire and was thankful that we were home. If we were not home our house would have burned to the ground. The microwave was not in use at the time of the fire. I plan to contact GE about this dangerous event. My asthma has gone crazy since this horrible situation happened. I just want to let people know that GE microwave will catch on fire without being in use.

This GE Model JNM1541 is a 1500 watt, under counter microwave with quite a few features. It has plenty of cooking power and has not failed in its nearly 5 years of use. I have never used the included metal shelf.

Don’t know the exact model type but it’s a built-in unit as opposed to a counter top type unit. It’s installed on top of a GE oven. Have had no issues whatsoever since purchasing the house in 2008. Barely no maintenance required aside from the normal cleaning of the inside of it and even that is pretty easy.

GE appliances were installed in my new build home including a brand new, never used microwave. When we did our walkthroughs the microwave appeared to work (turned on, timer ran, etc.) but after signing we found out that the unit was a dud and the microwave emitter did not work so nothing was ever heated regardless of the run time. We have called GE several times only to get extremely rude and dismissive customer service reps (“Audrey” if that was even her real name). They refuse to replace a brand new unit that never worked and insist on trying to repair it, but we are also being told that this will take several trips as the technician will only first come to inspect it then a second trip will be needed to bring out the necessary parts (they don’t carry them in the truck because they are “fragile”). I’ll never be using a GE product again.

Purchased a microwave 5 weeks ago. When cooking it smells like something is burning. GE would only issue a goodwill certificate. Now Im forced to buy another GE product. After taking the cover off its clear that one of the connectors actually melted. It bubbled up and turned black. Because of this and the fact that other reviewers had the same problem. I dont want to buy another GE product. I dont think its unreasonable to get a refund since its only been 5 weeks. If I have purchased at a different store with a longer return policy I would be able to just bring it back to the store. Apparently the quality of GE products has gone down. I would not recommend.

Purchased GE Dishwasher, Model GDF540HGD488. Its two or three years old and is junk. Top rack rails failing apart, bottom rack sliding rails have melted. Bottom sprayer has melted and wont stay on, incoming water has it bouncing on the bottom of the machine. As the heat dry is in it smells like melting or burning plastic. Dishes are NEVER clean and need re-washing. GE will do nothing, warranty off. Repairman says its just the type it is. Replacing it this weekend with a new Maytag, no way I would ever consider buying another GE product. Worst Dishwasher I ever owned.

June 18, 2018 GE Spacesaver Microwave in use when there was a loud pop, heavy smoke boiled out of the unit and strong smells of wires burning was noted. On fixed income now what do I do? Understand my microwave has been reviewed by ConsumerAffairs for the same issue in the past. Whatever became of their investigation?

We bought our new home 4 years ago & bought upgraded GE Profile appliances. To date, the gas range has been serviced 3 times, the refrigerator too many times to remember & now my dishwasher pump has gone out. We found out the pump just cannot be replaced, but all hoses, etc. must be purchased as well. GE is CRAP & I will never even consider purchasing anything from this company again. Knowing it was bought out a few years ago by Whirlpool (I believe) but still remains under the GE label - consumers BEWARE.

In January 2013, my husband and I purchased new appliances from Home Depot, including the above referenced dishwasher. The first dishwasher was delivered broken. The display panel was detached from the body of the dishwasher. At that point, I was concerned about the quality of the product. From the way it was detached, it appeared to be very cheaply made. (It was also installed incorrectly, causing a leak under our sink and ruining the bottom of our cabinetry. We settled this with Home Depot, but I include this detail to help emphasize my frustration over this whole situation.)When I contacted Home Depot about the faulty product, they agreed to provide a replacement, so I decided to give it another try. I wish now that I had simply returned the product and purchased another brand. Upon receiving the new dishwasher, I noticed immediately that the edge of the inner rack was scratched so badly that the plastic coating was gone, and rust had already begun to appear. I had to call customer service and get replacement racks. (More on this to follow.) Allow me to detail our service call records:Call #1. Heat dry didnt work at all. The technician told me that I needed to run the water in the sink and make sure it was very hot before running the dishwasher, and he changed the settings. This created a slight improvement, but not much.Call #2. Soon after, detergent tabs started to get stuck in the dispenser cups. I was using the exact brand recommended in the manual. The technician told me that detergent tabs were just the worst, and that I should try gel detergent, even though this is contrary to what the manual states. The detergent ruined my silverware, and I have had to purchase a new set, which I now hand wash.Call #3. Using gel detergent did not work. Technician came back, and told me the wrong replacement racks were sent. That must be what was blocking the water from getting to the soap. He ordered another replacement rack. He brought a plastic door, watched the water, and told me the upper arm wasnt spinning fast enough. He made an adjustment and claimed to fix that.Call #4. Detergent still not emptying from the cup. A different technician came back and used the plastic door. He found a different problem, but did not have the parts to fix it, so, another service call had to be scheduled.Call #5. Technician comes back, and finally fixes the detergent cup problem. For now.Call #6. Heat dry now does not work at all. There is so much water on the dishes that I have to hand dry them, and afterward, I have to mop my floor. There is just a massive amount of water in the dishwasher. In addition, it will not start except on a one-hour delay. Pushing the delay button does nothing to change the settings, and does not allow me to scroll through like it should. This appointment is scheduled for today, but I am not hopeful that anything will change.At this point, I have no faith that this dishwasher will ever work. Customer service did extend my warranty for six months, but that is the only concession I have gotten from them. That extension will expire soon, and I fear that at that point I will simply have to spend another $600 on a new dishwasher and leave this one on the curb. Its unacceptable for any consumer to have to purchase a new dishwasher less than two years after purchasing from GE.

Have had my GE dishwasher for 15 years. Had initial problem with inner liner pulling away but got GE to replace unit. Has worked fine ever since. Nothing fancy just gets the dishes clean. Would have liked a bit more adjustability with the shelves.

It is about six years old, great dishwasher. The bad part is the new detergent! GE profile, pre-rinse, preheat water, everything, including enough water. Hold everything, unfortunately, now aluminum must be hand washed. Good looking, curved front. Its great, I shudder to think what the new low water usage ones will be like. I HATE my new low water usage washing machine. I HATE the reformulated dishwasher detergent, can be used on anything aluminum, now I use lots more water hand washing all aluminum items!!!

Our GE Microwave Oven/Convection Oven Combo (Model: PT970SRSS) is a little over 2 years old. The interior paint on the ceiling of the microwave oven is chipping and bare metal is exposed. In addition, the microwaves glass turntable frequently slips off its plastic tripod base. Circular scratch marks, which also expose the underlying metal are evident in the area which is located directly below the glass turntable. The circular scratches are a direct result of the glass turntable scraping against the paint. The GE repairman said chipped paint is not repairable and that paint should not ever chip in a microwave, let alone a relatively new microwave. After many calls back and forth to the GE Consumer Relations person, we were offered a new combo at a discounted rate of approximately $1,000. (We paid around $2,000 originally.) Im not satisfied with this offer. I strongly feel that consumers should NOT have to pay to replace a defective item. GE needs to pull these defective and dangerous products off the market! Take a lesson from GM!!!