I purchased a GE microwave and had 3 different problem with it. They sent a service man out and he could not fix the problems. Now GE said they are closing the case even though they know I do not feel the problem has been fix. My other GE microwave, I really liked until it stopped working around 8 yrs old. This one is a piece of junk. It is an over the stove microwave so I cannot just take it back to the store. I would say GE has really gone downhill over the yrs. This will be the last GE product I ever buy.

Very easy to load. Controls are easy to read. Very quiet operating and does an excellent job cleaning utensils and all pot and pans. Have used for 8 years with no issues.

My purpose is to inform the public that GE will not stand by their stainless steel dishwasher appliance on rust. In less than 10 months the outside of our door has rust spots. I used only soap and water and cloth to clean as door does not get dirty and our water in Hawaii is safe and drinkable. Does not require water filters. GE CS said, We will only cover for 30 days after purchase, and cleaning products used and most likely our water type caused this issue.

6/11/2014. My microwave of 5 years the GE Adora starting to act strange. It would start to hum and the panel light would light up. The humming would only stop if I opened the door. Sometimes it would stop on its own. But today the humming kept continuing and I thought it was harmless until I heard a loud pop in the microwave and smelled something burning. The microwave glass turntable had exploded from intense heat inside the microwave. It was bizarre. Immediately I ran over and unplugged the microwave hood. In all the years and houses I own, this is the most expensive microwave I have purchased and it has lasted me the least amount of time! Microwaves shouldnt start on their own and thankfully I was home when it did. Otherwise my house would have burned down.

I purchased all GE Profile & Café appliances when we remodeled our kitchen in 2012. The DW has never cleaned well. I have contacted GE through email several times and now I have to handwash all of the silverware and re-wash most of the dishes. At times, glasses and silverware come out worse than when they went in. We have checked the water temp, pipe size. We use recommended detergent and finish rinse. We had a service call from a reputable appliance repair person, we purchased the recommended citric acid and performed the recommended protocol. This thing stinks! GE recommended another service call. I had a 20+ year old KitchenAid prior to this and it worked like a champ! Never an issue. I am ready to toss it out and buy something else (but it wont match!). Any suggestions?!!

Our microwave is of poor quality. Unit failed completely after a couple of years in use, like many GE products. This GE unit had a large rotating platter and easy controls, but it just stopped operating one day. Nothing could get it going again, so we replaced it with a Samsung microwave which appears to function well (only a year into use, so no way to know yet) although platter is smaller and controls not as convenient.

On 05/04/2014, our GE microwave over the stove unit burst into flames. My wife was sitting in our family room and heard the microwave fan start (spontaneously). Then she observed flames reflected in the kitchen window. When she went to the kitchen, she observed the interior of the microwave was aflame. The fire was extinguished with a spray bottle of water. The burning items appeared to be insulation. The fan from the microwave was with the burning insulation on the rotating plate.

I have a built in model that is now 9 yrs old and still operates as well as the day I bought it! I will definitely buy GE again. I have family members that have owned 2-3 microwaves to my one, that screams quality.

Ive had an overall good experience with the dishwasher although sometimes I feel that you have to do too much prewashing and the dish wash cycle takes a really long time.

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

I have had this microwave WES1130 for several years now and the paint began peeling before year two. Nearly all of the paint is now gone (fallen into my food). Also, I bought this microwave to replace a larger GE microwave that had failed after only 3 years. The 8-year-old GE fridge is humming loudly and leaks onto my floor, which has ruined the wooden floor and warped it. I will never again buy a GE product, and neither should you. They do not care at all about quality.

I purchase GE Profile appliances for my new home. I thought I had done my research but until I actually owned I found I feel differently. The microwave pad scratches very easy and after only a few months you can see which buttons I use the most. I’ve only used a microfibers cloth to clean and it scratched the surface. Appliance repairman said to use terry towel. Wish I’d known that. Secondly, after owning all Samsung appliances previously I now appreciate what I had. So many of the features of my past microwave are not on this GE. For example the vegetable good, built in sensory knew when vegetables were cooked. Also, soften butter and chocolate was another feature. Thaw meat knew when it was thawed. So my advise go for the Samsung microwave

Worst experience ever. Bought the dishwasher in Jan 2014. The washer does not wash. Three different technicians have passed by, cant fix the machine. Awful customer service, routine answers, file not assigned, cant talk to a manager.

Our microwave (GE model JEs1655DR1BB) is only a couple of years old (if that). Today, my teenage son went to make microwave popcorn and the microwave made the most horrendous noise and started sparking behind the panel on the side. It lit up the entire room. I went and checked to make sure there wasnt something foreign in it (there wasnt) and stupid me thought maybe it was the popcorn so I tried a bowl of water. It did the same thing again. I am just thankful it didnt start an actual fire, but I am furious!

We remodeled our kitchen and bought full line of GE café appliances which we have not been happy. Microwave screen cracked in the first three months; refrigerator is at max cooling but still does not cool or freeze enough; dishwasher has never cleaned well and marks my dishes with gray streaks and its control panel quit working and had to be replaced. They said that it was my soap, water etc., even though it never happened with previous dishwasher. All this in the first ten months of ownership of a couple with no family at home. Servicemen were nice and polite but their products are crummy. Dont buy them.

Have a GE over the range microwave oven, MODEL PVM1870DM3CC which started turning itself on for 6 minutes, repeatedly, WITHOUT being touched!

My GE dishwasher model #GDF570ddF855 is the worst dishwasher Ive ever owned. I have had 4. Ive had this model for 6 months. This model is hard to turn or to figure out if it is turned on. Right now its locked up and Im following the direction to unlock but it wont unlock. So theres no real on/off button! There needs to be a control on the inside of door where you can turn the lock button. Im writing this so others wont buy this model as they will be thoroughly dissatisfied. Maybe all GE dishwashers are like this? This one sucks...

I purchased a microwave in Oct 2010. It went blank and nothing works. I checked to see if its receiving power. The power is okay. I purchased the microwave, fridge and stove at the same time. I always had confidence in GE products. Microwave should have lasted longer than less than 2 years. I didnt purchase extended warranty because of GEs reputation. Very dissatisfied customer.

GE Dishwasher GDF520PGJBB - GE has the worst dish washer machines you can ever buy. In fact never buy a GE dishwasher in general. Maybe, GE makes good refrigerators but not dish washers. We bought this from Home Depot and after 6 months it collapsed: Pump broken, soap dispenser broken, panel doesnt work. We had before a Maytag and we used it for over 20 years without any issues. In addition, GE has the worst customer service you can imagine. They are robots, repeat the same thing with a very annoying tone, and are not able to solve a single issue. We were even harassed by GE manager Evan or Aven, useless man, from customer relation who enjoyed seeing how much frustrated we were. This was the only GE appliance we have in our house, and after this unpleasant experience with GE will NEVER buy any GE appliance, even if it was free. GE refused to fix our machine under the pretext that its not installed on Ply Wood. We didnt install the machine ourselves but professional technicians from Home Depot and they also refuse to put PlyWood under the machine as its not a requirement. They do it every day, but looks like GE have Lazy technicians.

Negative 5 stars. I purchased a GE over the range microwave oven, JVM2052SN1SS, just over a year ago and had a service call to address a lack of exhaust about a month after my purchase. In summary, the tech said it would not function as a dedicated exhaust hood and nothing can be done. 14 months later, the key pad began malfunctioning. Also, the moisture sensor that the operation manual stated will automatically start the exhaust fan, never worked and every time we cook, moisture would build up between the glass on the microwave door.I called GE Consumer Relation today and they will not address this issue free of charge. I will not purchase another GE product because GE dont stand behind their products.

My old (Panasonic) microwave lasted over 15 years. This brand is really poor quality and they dont stand behind it. Electrical burning smell. Less than 9 months old. Called customer service, they refused to repair and will send a goodwill rebate cert saying I can buy a new one (any model) and I will be refunded. I ended up paying $100 more because all local stores did not have anything close to my model. They will not cover shipping, tax or any of the extra cost of the new microwave. Stay away from all GE products.

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.

After having my Cafe Stovetop for about a year and a half, there was a electrical component malfunction. During this, smoke came out of the stovetop and it smelled of electrical burning. I sent a complaint to GE since several components were damaged. Knowing that the warranty was only for 1 year, there would be nothing they could do except sell me the parts.

Similar to another comment, we bought the entire suite. Dishwasher cycle screen gone after five uses. Oven temp needs adjusting. For the quality we were sold, this is extremely disappointing. Bought extended warranty, thank God, so will see if it was worth it.

I purchased this in Feb. 2013. Just before the 1 year warranty was up the control panel went out. They came and replaced it. Now just a little over a year of the replacement, the control panel went out again. Worst microwave hood fan Ive ever had.

GE microwaves are crap. In fact its not restricted to microwaves. Its their ENTIRE line of appliances. They team up with other grade e or f manufacturers for appliances (ie: LG, Samsung) and ANY GE appliance is almost guaranteed to fail prematurely. I see all these comments bucking Malaysia and in all reality the fact remains that Malaysia makes damn good stuff (think SONY). But it is the COMPANIES that build the products and how much theyre getting paid that factors quality. No doubt that GE is using the bottom dweller rejected off the assembly line parts to build their units. Most are Chinese garbage. China also builds some very reliable products but as the saying goes dumb American will buy anything. They save the best for them and sell us the crap.It is the lowest grade of those already should have been scrapped at the factory parts that GE passes off as quality and they do a good job at showing it. A cheap 30 dollar China made Emerson microwave made by Daewoo (Korean company that actually is decent) lasts longer and takes a hell of a beating compared to the overpriced rejected junk we call GE. The GE ac units are another classic example of pure garbage. Sadly the older GE works forever. That should sum it up. Why didnt the GE executives while visiting Thomas Edisons grave make every effort to step away from his grave and not stand upon it? Because Thomas Edison would pull them under.

I bought countertop microwave on 7-2-10 in Panorama City, CA. We were moving to Houston so left it in its original box, but the new apartment had a built-in. I left it in box until May 25, 2011 when we moved into an empty house. I took out my new microwave and used it from 5/25/11 until 12/4/11. I baked a 5- minute sweet potato. Later, I went to reheat coffee and no clock, no nothing. I tried the microwave at different plugs, no response. Then I tried the toaster in the microwaves plug. The toaster was fine so its not the plug. A repairman at his business location said its probably the computer chip. For $95, he would install a new one which would last a lot longer. So now we have disposable GE microwaves.

Bought model DDT575SMFES less than a month ago (along with a new microwave, stove and fridge) from the Home Depot. When the appliances were delivered the stove had some flaws in it so it had to be replaced. The dishwasher is a whole other story. It worked fine for a week but now it takes forever to get it to turn on. We try and try but it just beeps and the light flashes. Once we do get it turned on to stops before completing the cycle. If it does run a full cycle the soap dispenser does not dispense the soap. I wish I would have looked at this site before purchasing these GE appliances. Total junk and will NEVER buy anything GE again if I can help it. No responses back from GE and from what I read dont expect much from them. Now we will not be able to match the Slate with another brand and are stuck here.

We built a new home in 8/19. Much to our dismay, the builder only offered GE appliances. We had a bad experience with a GE appliance in the past so we went with the most expensive offered, the Profile series. Nine months into our new home, the microwave push button to open the door broke (with food stuck inside). I was only able to schedule an appointment through an automated system. Days later, repairman breaks door trying to get food out. Parts were ordered and new date was set for one week later. Day before that appointment, I got a call canceling my appointment due to the part being on backorder. The entire call took 57 minutes. New appointment was set for an additional week. Again, appointment canceled and part was ordered from third party. Third appointment was a repeat yet again (but without a call and with repairman showing up). The rep did say she would send $70 for us to buy a small microwave while waiting. We are now at three weeks without our microwave being fixed and I have spent HOURS on hold trying to get to a resolution. Last representative asked why I even made an appointment if I didnt have the parts. What!! They have scheduled the appointments. I asked to talk to a supervisor but then was told it would be 24-48 hours before someone could call me back. The rep said this is the timeframe they quote for a callback but she didnt know when anyone would actually call. No idea how much longer we will have to wait-it seems we are at their mercy. When buying new appliances in the future, we will ask who services their warranty! Either way, we will never buy GE appliances again.

Our GE microwave is 20 years old and still works great! Still looks pretty good too!! We do have a small crack and the start button is worn, however, we use it several times daily. Would definitely buy this brand again.

I have had 2 Profile dishwashers in the past 3 months. I have not been able to use either one. First one had a cracked tub and the replacement would not run. I tried for hours to contact GE customer service and was placed on hold for almost an hour before they closed for the day. Not only is this washer a piece of garbage, GE customer service is terrible. Do not and I will say this again do not but this product.

GE built-in oven with microwave on top in white color, model no. JKP90CMICC. Microwaves outside door is peeling off in chunks. This is a manufacturer defect and I have contacted GE to see if they will stand behind their products quality and replace this door of the microwave. I have heard so many negative things about GE customer service so I dont have much hope but I have to pay to replace this poorly constructed door. I will never buy another GE product and I will spread the word on how they treat their customers. I will post again when and if I hear back from them.

GE appliances were installed in my new build home including a brand new, never used microwave. When we did our walkthroughs the microwave appeared to work (turned on, timer ran, etc.) but after signing we found out that the unit was a dud and the microwave emitter did not work so nothing was ever heated regardless of the run time. We have called GE several times only to get extremely rude and dismissive customer service reps (“Audrey” if that was even her real name). They refuse to replace a brand new unit that never worked and insist on trying to repair it, but we are also being told that this will take several trips as the technician will only first come to inspect it then a second trip will be needed to bring out the necessary parts (they don’t carry them in the truck because they are “fragile”). I’ll never be using a GE product again.

Very heavy to mount above a stove, not enough watts. The model I have is 900 watts, too many options for cooking different foods, not many parts are available to make a repair on any of the GE microwaves, I would not recommend purchasing a GE.

We have a GE Profile Microwave (PNM1871SM3SS) that is only 3 years old and is reporting KEYPAD SHORTED - SERVICE MAY BE REQUIRED. We called GE service repair and told them the exact message. The service guy shows up and says all he has in his order is General other service needed and that he doesnt have the keypad panel. Gives us an estimate of $501 to repair it. Tells us a new one costs $400 and with a coupon he can give us it will be $100 less. We were charged $99 for this visit which basically lasted 10 minutes (way to go GE on making money off faulty devices you sell). The service-person also told us that the average life was 10 years for these, but this one crapped out in 3. He said if we get another GE microwave, it will fit right in there and that I can do it myself if I am handy but after reading all the reviews online, I am skeptical whether I should get a GE microwave again or not!

GE Cafe Microwave CVM2072SM2SS - The touchpad stopped responding, like many other who have had this issue. GE would not give me a break on replacing the main and supporting circuit panel as suggested by the technician, so I had to pay out $500 on my own. After less than a year now the microwave wont heat. I liked the units looks and display but if it wont work, its useless.

Our GE Spacemaker XL microwave stopped working on 7/11/12. We purchased our house in January 2000 with the microwave included and have not had any problems with our microwave, until yesterday, when we woke up and tried to pop the kids breakfast in for a quick heat and it made a strange humming noise and you could smell plastic melting. All power was quickly turned off to the unit. Now to find a replacement for this built-in microwave is going to be a problem. The local technician stated the blower motor we need is no longer available. Thanks, GE, for at least 12 years of excellence. We are now looking for a similar replacement.

I purchased a newly built home which had all GE appliances in the kitchen. After 2 years and 5 months, the microwave no longer heats the food. I had a 3rd party appliance repairman come to do a diagnostic evaluation. He informed me that the magnetron has gone bad. To have this repaired would be the same price as purchasing a new microwave. He also informed me that the magnetron should never go bad in such a short amount of time. I contact GE and my warranty was for 2 year so the best they can offer is a $75 good will certificate. What this means is I have to purchase a new microwave and send in proof of purchase and in 4-8 week, GE will send me a $75 rebate check.I am disappointed in the GE product. Their products are now made in Asia (my microwave says made in Malaysia) for cheap labor and the quality has gone down. What is worse is that they do not stand by their product. The fact that something as serious as the magnetron went out in less than 3 years is a red flag that it was not assembled correctly. The microwave is listed at over $500. I would have been happy with GE even paying half but $75 will not even cover the cost for shipping and installation. I am very disappointed.

My GE Profile Dishwasher is a plain Jane without the bells and whistles, yet is a trusted, working appliance. Honestly, the only beef I have with this model is that plastic articles do not dry completely unless placing the controls on Heated Dry, and leaving the dishes in the dishwasher for the entire drying cycle. I have had my kids place some dishes in the dishwasher, caked in day old food. I left the plates in the dishwasher, hoping to teach my kids a lesson about rinsing off their dishes before placing them in. Imagine my surprise when after running the dishwasher through its normal cycle, the plates came out spotlessly clean! Impressive!

Sometimes there are dishwashing detergent (powder) left on the dishes. Nothing extra, very basic, it has regular or pot scrubber cycles, air dry or heat dry, a slot for dry rinse liquid, detergent slot, short wash cycle, upper rack, lower rack and flatware basket. Came with the house purchased 17+ years ago. White body with black upper control panel the entire width of the dishwasher. It is still in very good condition, but then I take care of everything, always rinse everything before placing them in the dishwasher. Never needed service yet.

This dishwasher is cheaply constructed with a plastic interior. It is so loud that we run it when we are away. Its impossible to watch TV while this thing is running. Also the dishes come out with a film on them. Not happy with the low grade appliance at all.

I cant remember the exact date of purchase for my GE Spacemaker microwave oven. I have a receipt somewhere, but I have receipts for repair dated 2002. It is for a door seal gasket for the microwave. A model JVM60 GE Spacemaker installed over the range.The microwave worked perfectly for several years. Then one day, when I pressed the start button, I noticed a small fire inside the window above the control panel where the time is displayed. I called repair man; I was told that it was the circuit board, and GE was not able to send repair spare part. Since then the microwave is only good for displaying the time, and storing my everyday pan. I do remember paying $400.00 for this microwave because I purchased it at my employment. It would seem to me a company making a $400.00 appliance would be backed by a circuit board, which they know would go bad in a short time. Thats why they only had a one year warranty guarantee.To show you the difference in a microwave appliance, I purchased a small counter top microwave in 1997; it still works like a charm, and I use it every day. From the negative reviews I read on these Spacemaker microwaves, I firmly believe there should be some compensation to us consumers for the money spent, plus the hazards we experienced. If that is not agreed, then all of us consumers should file a class action suit against GE.

My microwave (model#JES1139BL03 and serial#901897B) is peeling around rolling fixture that holds glass tray. I wipe it with hot water and it continues to peel off. Its almost all gone. Ive only had it two (2) years. This cant be normal. Anyone else have this happen?

In 2008, after waiting 30 years, we remodeled our kitchen using both a GE Range & GE OTR Microwave, model # JVM1850. Last week, it started making a loud noise when started and wont heat. From reading online it sounds like the magnetron went. Everything else, fan, turntable, lights inside and outside work, but wont heat. I called in for service to find that it would cost $89.95 to have them come out to diagnose it. Also read that a magnatron is between $150 - $200, and used to be warranted for 5 yrs. New GE microwaves only carry a 1 year total warranty. So they know they are supplying junk to us. Had to just bite the bullet and replace it. People cant afford for appliances to only last this long, at the price they are charging. I am not only upset at having to spend another $450 only 6 1/2 years later to replace a microwave that was lightly used, but GE has chosen to change the look as well, so it no longer will match the range it sits above. When I was remodeling, I read so much about matching appliances... not matched anymore. Totally disgusted.

GE continually shows us why they are failing as a company. In just this last year I have replaced a less than 5 year old GE microwave, three separates parts to my GE monogram refrigerator, and now this one and a half year old dishwasher. The only appliance that GE makes that hasnt broken is the stove/oven that is over 10 years old and shows no signs of weakening.I purchased the upgraded stainless steel model that contained all the bells and whistles. It lasted 1 year and 3 months before the entire control panel stopped working. We utilized the dishwasher about once a week or once every two weeks in a two person household. Hardly a rough environment for a 700$ appliance. The repair costs was quoted for 99$ just to have GE look at it. The control panel was 140$, plus additional labor. This amounts to over 280$ to repair a year old product. I advise buying LG or Bosch.

It is functional and does the work. We are impressed with the large drum which takes a good load. It runs smoothly but with some noise. However we do not mind this as the end product is what we wanted.

GE GDF520PGDWW 24 white, full console dishwasher - Energy Star. I have had this dishwasher model since December 2014 and it has not drained consistently since the beginning either during the wash cycle or rinse cycle. GE has sent three different repair companies to replace the pump, the control panel, and ultimately the entire dishwasher, yet even the new dishwasher still does not drain consistently. Sometimes it drains and sometimes it doesnt. The GE-certified repairman was again here this morning and is again ordering a new pump. Counting the original pump, the previously replaced pump and the pump in the new unit, this would be the fourth pump. I tried to suggest the problem may not be the pump, but the repairman could not think of another possible issue. I do not recommend purchasing this dishwasher.

Our GE Cafe Appliance package is less than 1year old and the convection/microwave door handle is wrinkling and peeling. I realize that weight may be a concern hence the plastic vs. metal handle due to the side hinge of micro but aluminum or other light metal would have made more sense. A service tech is coming out next week to replace the in warranty handle however this cost will be our responsible next year when this happens again. A light metal retrofit/recall seems to be the logical solution to remain customer centric and maintain GE loyalty. How this material choice error is handled by GE to ensure this problem does not repeat during the life of this appliance defines brand loyalty. Thank you for your consideration.

Nine cycles but none of them dry the dishes. Very quiet, cleans the dishes very well. Like the third drawer, very handy. The only complaint is that it does not dry the dishes. No combination of cycles will dry the dishes.

I never imagined that a microwave in my new home would be rendered useless after 2.5 years. Like many of you, my control panel stopped working and the floor of the oven was extremely hot to touch. Heres the weird part. You can hit the number for timed cook, but youd have to let it heat the entire time. If you open the door, you cannot restart it. You have to unplug it to reset. Of course, I called GE customer service, who gave me the same spiel about $80 service call, plus repair and parts. Thanks to your candid remarks, I will not be purchasing another GE appliance.

Microwave Model HVM1540LP1CS... This microwave was installed 6 years ago when I built my home. I live by myself and the microwave has only been used by me. I loved this microwave until suddenly it began to turn on by itself and I would often hear popping noises. I looked up reviews of this GE microwave and found that this is a frequent problem with GE microwaves. Fires were reported in a couple of reviews so I immediately unplugged mine, as a safety precaution. If this happens frequently with these microwaves, why isnt GE replacing the parts for the defective machines since they can be fire hazards?

This is the second time GE has replaced the unit. The paint is peeling. The microwave is all rusty. The same thing happened to the first one too. It looks disgusting.

GE brags about employing its own service technicians yet, when I called to schedule an appointment to fix our Advantium 120 microwave (3 years old), they told me that unless I provided proof of purchase to the technician, he would charge me even for parts under warranty such as the magnetron tube. This in spite of the fact that they have all the purchase information at their fingertips, as I reported when we registered our purchase. They even told me our date of purchase, had our address, email address, etc. They dismissed my suggestion that an email from them to me that I could show the technician should suffice. After 3 years and severe family health issues, I have sadly misplaced the proof of purchase, not realizing that registering the appliance for warranty provided no real benefit; not even proof that I didnt steal the thing. I am saddened that a company of the former stature of GE would stoop so low to avoid a legitimate warranty repair.

My microwave is only 5 years old. It is burned out electronically. I would never buy another GE product. My GE Profile stove needs a $300 repair after 4 years.

We purchased a new home with a GE Profile dishwasher installed. Since the day we had it, we have never been satisfied with the cleanliness of the dishes. They frequently come out covered in food and must be rewashed. We now routinely prewash everything in the sink and we always use the cookware setting to wash everything. Despite this, we still have to re-run loads because they are not clean.I am convinced that there is a design error with our dishwasher, because the top dish shelf obstructs the door of the soap compartment and prevents it from fully opening. After a load has run, you can still see leftover soap dried and crusted in the soap container. If the dishwasher cannot even wash the soap out of the soap compartment, no wonder our dishes are not clean.

We recently purchased our second dishwasher in 16+ years (the other one (a Kenmore) is still running fabulously but staying with the sale of our former home - however I am tempted to swap it out with this new one from GE). This beautiful inside and out dishwasher has a couple main flaws that has me wanting my old dishwasher back. The buttons on the front are super sensitive, causing it to come on countless times a day as we get items out of cabinet above. This is not something we thought about. Our old one had the controls on the front but they were under plastic that you pushed... not actual buttons like this one.The second issue is minor. The rack on the bottom is set up very wide on one side and our dinner plates are smaller than some and they do not sit firmly in between the tines. The spacing is great for larger plates or serving items but not for medium size plates. We use a lot of bowls so the other side with closer together tines is always full. Like I said just a minor flaw. Lastly, the unit puts off a high-pitched sound during certain parts of the cycle. It is not really loud but it is bothersome if we are still in the kitchen when it is running.

Bought the whole GE profile kitchen series 2 years ago. Last week the microwave went dark, blew a component, and is dead. With only two people using it off and on for reheating, hardly got our money worth. Called GE for assistance and went back to the store where it was purchased. No one offered any financial assistance with the loss. The microwave itself was $500. My husband and I are very disappointed in the product and service.

We had a new GE Monogram dishwasher installed September 2014, a little over a year. We had a hose leak and it cost us $229.00. I do not recommend this product.

I purchased this GE Adora dishwasher about 3 years ago from Home Depot and it cost about $550 which I think should translate into a well made dishwasher. I only run it about twice a week so it gets low use. On inspection this month I noticed the racks were already starting to rust and that there was a tear in the door gasket. I called the 800 number for GE consumers and they told me they could order me the racks for $200 a piece and that they would send out a repairman for $139 plus the $40 part. This is more than the dishwasher cost. They also told me I should have purchased the extended warranty and that this particular dishwasher has only a one year warranty. What happened to GE? My family has GE refrigerators for years without an issue and my dishwasher is already exhibiting problems after 3 years.

We have had our GE microwave for at least five years. We have moved multiple times and had the power go off but through it all, our GE microwave works just as good today as it did when we first bought.

I purchased a stainless steel GE dishwasher for $508.68 since I remodeled my kitchen October 2016, I contacted GE in March 2017 because the stainless steel on the dishwasher door started to have rust spots, they sent a technician to look at it, they told me that they cannot replace it because the aesthetic warranty is only good for 30 days. They authorized the technician to replace the door, however I have the same issue with the new door, and also the dishwasher stopped working. I contacted them again. The technician was able to fix the dishwasher, but as far as the stains on the door they told me thats an aesthetic issue. They cant do anything about it. I called the consumer relations department. I spoke with CIARA GE case # **. They offered me a small discount and I have to come up with $400.00 to buy a new dishwasher.I feel that a good business should always stand behind its products. The dishwasher obviously is defective, they sold me an appliance that supposed to be stainless steel but its something else, the right thing for GE to do is to exchange the defective product for the right one. I am very frustrated that in less than a year I have to spend over $900.00 for a dishwasher. I am great customer for GE, I remodeled my kitchen, I purchased a GE refrigerator, cooktop, oven, kitchen hood, microwave and dishwasher, I think I deserve better than a small discount for a defective product.

Coincidence or not but after posting my review, threatening to get the attorney general involved, putting pressure on local GE distributor through the builder, we have received a replacement dishwasher. This is not a happy ending yet unfortunately.The installer who delivered the unit was filling in for someone who took a day off and was not familiar with complete process. He came to our house at 9am and left at 2:20pm after spending hours reading instructions and maps on how to put things together.The new unit works okay for now but does have a slow drip from the upper left corner. This has been an extremely frustrating battle and we are now more worried about what happens after the warranty runs out if problems continue.One option is to buy extended warranty and give GE more business, second is just to replace it with more reliable brand. I am giving GE two more stars for replacing the problem unit but we are still hurt from the entire process, especially after buying top of the line product. We truly feel that customer service people should have been more sensitive and understanding of the consumer instead of firing back. Their bad attitude really did not help and added more frustration.

One needs to be a contortionist to replace the under light bulbs on this microwave. It is a TERRIBLE design. Why werent the sockets placed so that the prong holes could be visible? One has to do a back-bend over the stove top and then the socket holes are still not visible. DO NOT BUY THIS MICROWAVE. DONT BUY THE STOVE EITHER. IT IS DANGEROUS. THE KNOBS TURN EASILY AND OPEN THE GAS.

I have a GE microwave oven. The paint inside the door is peeling off and has been for quite some time but I never got around to calling them. I recently decided to purchase a new microwave and use my old one downstairs. I called GE to ask them about this problem as I didnt want to have this same issue with my new microwave. GE told me they would do nothing to help me fix the problem and I need to stop using it because it is a safety hazard. I told them the microwave still worked fine and if I need to stop using it, does GE offer any compensation for something that is obviously a defect. I was told, no, GE will do nothing. I told them Id even be happy with some touch up paint but the lady was so rude, she would just sit there and not say anything until Id ask, Are you still there? Granted my microwave is several years old but because of this door defect, Im being told basically I use it anymore even though it still works. I need to just throw it away. I have a new GE microwave on order but thanks to their horrible customer service will be cancelling that order and buying another brand. I also will not ever purchase another GE product. I told them this and they said, fine. Obviously they dont give a crap about their customers.

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

I purchased a General Electric model peb7226df1ww in 2013. It lasted two years, then failed. I replaced it and two years later the replacement failed. At least GE microwaves are reliable in that aspect. You can count on them to fail. I am convinced GE installs a delayed kill switch on their microwaves to help their revenue stream. This was the last GE appliance I will ever purchase.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

My GE dishwasher is 30 years old and has never had a service call. It has a built-in food grinder and my dishes almost always come out spotless. Standard size, upper rack, removable utensil basket. Almond with a dark faux instrument panel with rotary dial. It was a builders model. Works like a charm but very noisy. Even though Im a small family Ive tried to use it consistently to keep the seals lubricated. It has stayed really clean inside with just using the dishwasher detergent. Unit does have some kind of preheat Electrical for the dish water temperature. The new ones dont work so well so Im afraid to replace it.

Ive had a GE Dishwasher for over 6 years and it works great. The issue is every 2 years or so, the plastic over the metal rods that make up the plate racks wear away and rust the underlying metal. The first time GE charged me about 200.00 for the racks, where the dishwasher only cost 250.00. The second time they replaced for free and now this third time, GE is being absolutely absurd not replacing these racks. My concern for mine is the health issues arising from having rusted parts in the washer. I believe this to be a manufacturers defect and could be happening in 1000s of these dishwashers. Metal should not go into water!!! GE should gladly replace my racks but theyre giving me a major problem, like take our offer or dont bother us. Please see the attached pictures and hopefully this doesnt happen to your dishwashers.

We have had this microwave GE JVM1631wb007 (2003) for a number of years installed above our stove. It was given to us by my husbands son so we did not have it registered with GE as owning it. However, I just sent an email to GE today asking for help as I find absolutely nothing on the internet about a scorched outside microwave door. We have had no issues with it whatsoever - until now. When we returned home from a one week vacation this past Sunday evening, we came home to a scorched OUTSIDE door on this microwave! The inside is fine. The two people who came into the house while we were gone said they did not use it but it is DEFINITELY scorched around the entire area on the outside around the screen area. I refuse to use it although my husband (who is an appliance repairman but does NOT work on microwaves) says its fine to use. Its not only hideous, it LOOKS unsafe to use. Im scared its going to catch on fire but my husband says dont worry and go ahead and use it! Im attaching a pic of it... Anyone else heard of this? Its not like we dont have the money to replace it. Im NOT going to touch the thing... You cant tell him anything. He thinks its fine. I need PROOF that this is dangerous to convince him... Please help before the house burns down!

My GE microwave oven died after 4 years. And my GE washer died after 5 years. Never ever buy a GE appliance. The market agrees, because their quality issues might be the reason the company has not been able to sell their appliance division for several years now.

Have to rinse dishes clean before I put them in. Otherwise they will not get clean. Does as well as most other dishwashers- until you get into the very upper end ones. The racks are good size. The outside is nice looking.

Almost 2 years ago and right from the start this dishwasher did not clean. Numerous times they had people come out and supposedly fixed it. Ive had different suggestions as to what to do. 1. Turn on the hot water tap and make sure its hot. 2. Use various different cleaning solutions on top of the dishwasher soap. 3. Use loose detergent.4. Throw at the bottom of the washer.One of the arms keeps falling down. And the last time I was told I could return it and get a deal on a better machine. I am now left with hand washing every item that goes into it unless I want gritty glasses, dishes and silverware. I bought this at Home Depot. I will never buy any products such as this from them nor will I ever buy another GE product.

First, I want to acknowledge that I misplaced my receipt due to a move, 8 storage units and 4 houses. But...I did register my new, never before installed dishwasher when it was installed October 2020. After install I ran it empty to test/clean it. IT LEAKED. I called GE to schedule repair. I was told it was manufactured in 2018 (another said 2019) and it was not under warranty. I explained I purchased it only a few months before and installation was delayed due to my contractors. They said I would have to pay for labor but the parts were covered under warranty. I didnt like it but agreed because I couldnt find the receipt (from a big box store).Local repair people came, after 2 more calls, 3 weeks later and fixed the leak. They did not run or check if anything else was wrong with the dishwasher. I began using it and quickly realized that it did not get the dishes clean. It does not heat the water, it does not dry, it cant possibly sanitize without heat and kitchen installer said it was missing the kick plate. Geez!! And this is just the things I know!! I have called 4 times now to schedule a service repair, each time having to explained the whole thing, sit on hold, ask to speak to a supervisor, be transferred to customer service and 4 times I have been DISCONNECTED!! I bought all GE appliances so they would match but I would give anything if I didnt have to deal with GE again!! Unfortunately, I will have to call again Monday or buy a different brand. Save yourself and buy another brand!!! Wish I could submit a picture.

Bought a PDT845SSJ2SS in June. Two months later, it has a leak. Good news, has a leak detector which shuts down the machine. Bad news is that it leaks and the leak detector worked! Called GE. We dont have an authorized service technician in your area. We will get back to you within 3-5 days. Three days later, after I had raised rain with my appliance dealer, he arranged for a local dealer to come look at the machine. Scheduled that appointment - it was Friday, and We only come to your area on Tuesdays and Thursdays. Next Tuesday is booked, so we will try for Friday. Then, someone from an organization called Platinum Services calls and says GE has assigned the ticket to them. Shes going to try to schedule a diagnostic appointment in the next 7-10 BUSINESS days. Told her to forget it (found out she was calling from Lowes and had to find a technician before she could schedule.) End of week 1. Following week, someone else from GE calls and asks if I was cancelling my service request. In the course of the conversation, she asks to confirm the model GE RANGE that I have. Kinda lost it on her... On Thursday serviceman from local dealer comes. Turns on the dishwasher - it leaks exactly where I had said it would. Need to order a part and GE will not expedite. End of week 2. Next week - crickets. Nothing, Nada, mushroom mode (in the dark and being fed BS). Called my appliance dealer today and told him to come pick up the dishwasher - says he cannot do that. I explained, “I will forfeit the money I paid - I dont want a dishwasher that leaks in the first two months of use.” He tell me GE released the part yesterday...whatever THAT means and he HOPES repairman will come next Tuesday to repair. So, I have had a new GE dishwasher for 3 months and it has only worked for 2. Be aware! I assume partial responsibility for this goat rope - I faithfully refer to Consumer Reports when purchasing appliances and electronics. I suggest you do the same... you will find GE listed AFTER BOSCH, KITCHENAID, KENMORE and others. Also, realize the GE brand is now a CHINESE company. Caveat Emptor!

We have a full size counter top GE microwave. It is about 3 years old and there have been no problems. Our last microwave was also a GE and it lasted about 15 years before it started to suffer from occasional electrical arcing inside, while in use. We simply stopped using it and after reviewing all models, chose to buy another GE and it has been great. We have an over the range micro at our summer home - a Frigidaire and not as good. Our research shows it will likely fail long before the GE.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

Touchpad for CVM2072SM2SS stopped working. This touchpad has been creating issues for the last couple of years. Few reconnection of wires got it working for the last few times and now it is completely broke. GE is not ready to help with fixing the issue. It wants to sell me another microwave CVM1750SHSS which seems to have similar issues (also the plastic handle for those microwaves seems to fall apart due to heat). In fact, the reviews for the whole range of GE Cafe series seems to be pretty bad. GE is not owning up the design issues. Too bad!

My dishwasher is a GE Profile. It is as quiet as a Bosch we had in another home we had but it must cost half as much. We have it 8 years now- no problems. Never had a service call or anything wrong with it. It owes us nothing.

My husband ran our 4-year old GE stainless steel dishwasher (PDW8980N00SS) at 9 pm, 2/4/13. At 11 pm, he emptied and put away the dishes. At midnight, we went to bed. At 4:50 am on 2/5/13, we were awakened by a burning smell and discovered the heating element of the dishwasher either turned back on or never turned off. We were unable to touch the granite counter, the front of the dishwasher, and both wooden cabinets on either side of the dishwasher were very warm. The spinning arms and other plastic parts were melted. The only way it could be turned off was to unplug it from the outlet in the cabinet. We were leaving for the airport at 7:30 am on 2/5/13, so needless to say, we would have lost our home if this occurred a couple of hours later. The Assurant tech said it was repairable and ordered a part, which would take at least a week. Assurant customer service had us call GE. When we stated we didnt want the faulty dishwasher repaired, but wanted a new dishwasher, the best the GE customer service rep could offer us was 38-40% off several new different Profile dishwashers. After reading page after page of bad reviews, most of which detail either one or multiple fires from different GE dishwashers, we dont even want another GE dishwasher in our home. We already needed the smart soap dispenser replaced, since it clogs periodically and doesnt wash dishes very well. We also have a countertop GE Profile microwave, and the turntable motor has gone out 3 times so far. Weve purchased the replacement motors ourselves since it isnt under Assurant insurance. Not sure what the resolution will be on the dishwasher, but wed be happy if GE would give us at least $500 toward a different brand dishwasher. I know well never ever buy another GE appliance after this. We wouldnt sleep at night or ever want to go out of the house without unplugging another GE dishwasher, so dont want one.

I purchased a GE over-the-range microwave, GE Profile **, on 2/22/2005 as part of a kitchen renovation. I also purchased the GE Profile dual-fuel range, **, and the Profile ** refrigerator at the same time.I am now having to replace the over-the-range microwave as the interior enamel is chipping off in chunks rather than the discreet amounts in the beginning. The dual fuel range burst into flames and was replaced 3 years ago (the line was eventually recalled). The tracks that support the drawers in the refrigerator are breaking off slowly but surely, meaning they will not be useable shortly. I would not take a GE appliance as a gift.

GE Cafe Dishwasher Model CDW9380N00SS - The dishwasher is just under 5 years old and is used approximately once daily for lightly soiled dishes, usually only half full since there’s only 2 of us in the house. On 12/28/2012, I ran the dishwasher on a normal cycle, no additional heat or heated drying and the cycle finished about 9pm. I did not open or unload the unit and went to bed. About midnight my wife smelled smoke and woke me up. We ran downstairs to find the dishwasher blazing hot and the smell of burning plastic coming from the dishwasher. I killed the circuit breaker and opened the dishwasher door. The whole first floor of the house smelled liked burned plastic and we had to open all the windows and doors in 28 degree winter weather to vent the smell. The bottom heating element had come on and stayed on! The entire bottom of the flatware basket was melted out and all the forks, knives and spoons were in the melted plastic goo in the bottom of the dishwasher. The wheels melted off the bottom wash rack and the lower wash arm melted and burned. Also, the plastic screen in the bottom of the dishwasher is twisted and distorted. Some dishwasher safe items like the glass coffee maker carafe with the plastic handle and rim are unusable since the high heat distorted the plastic parts. They were on the top rack. We feel fortunate that first, my wife smelled it and woke up. Second, the dishwasher tub is stainless steel and so it contained the heat and lastly, that our counter tops are granite since directly above the dishwasher, the counter was hot enough that you could not hold your hand on it comfortably. GE is coming today to evaluate the dishwasher and determine what, if anything, they will do. It is not under warranty, but as I told GE, it’s a safety concern. We dont want it fixed, we want a new one. Nobody expects a 4-5 year old top of the line dishwasher from a company like GE to be a fire hazard in their home. This dishwasher cost over $1,100.00 in 2008. My questions: why would the heat element come on at all given the settings? Second, why did it come on after the cycle ended and the indicator lights said clean? Third, why isnt there a high heat shut off switch that would have killed the power in a circumstance like this? And fourth, since I see other consumers with Cafe Dishwashers have had similar concerns, why isnt there a recall on this model? There are recalls on many other models it seems for heating element malfunctions. I believe that any action other than replacement, even after the warranty period, is irresponsible on the part of GE, but the cost of law suits and settlements maybe less than the cost of replacements or recalls. What of the potential cost of lost lives?

I purchased a GE over-the-range microwave in 2008. After 3 years, the magnetron went out and the microwave stopped heating. I called GE repair, and they told me it would cost over $300 to fix - close to the cost of a new microwave. Stupidly, I bought another GE microwave in August 2011, model JVM1750DP1BB. In the one year Ive had it, it has broken 4 times. One time, it was the magnetron (seems like a common problem). Another time it was the motherboard. Another time, it was a bad wiring problem. Each time, I called the GE repair service, and it takes 1-2 weeks to get an appointment. Twice, they cancelled my appointment on the day because they overbooked. Given that I had to take time off work for the appointments, this is a huge inconvenience. I have been waiting over this last time for an appointment, after they again cancelled my scheduled appointment. GE makes a terrible product, and their repair service is a joke. I bought GE because I wanted to Buy American, but they have completely turned me off. Think twice about buying GE! You will waste lots of time and money.

My 2-year old microwave and range handle(s) have paint peeling issues. GE has a program to replace the microwave handle. They DO NOT have one a similar program for the range (same paint peeling issue on the range handles/rings). They offer a discount cost for the range handles. I am sending them pictures and another formal complaint.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

We moved in to our home in 2006 and it had a GE Monogram Microwave built in. The microwave died and I purchased a similar GE Monogram microwave to match our kitchen in 2014. That microwave died exactly 17 months later. Fortunately, we had a home warranty program as we are selling our home. I figured that this saved me the effort to complain to GE about their product... Wrong. The Home Warranty program sent a repairman who said we can order a part. A few days later I received a call that they would replace the microwave. OK... I checked online as well as with a local retailer to see which model is the replacement model, and trim kit. Today (about 10 days after I first called for service) they delivered the new GE Monogram microwave and installed it. Fortunately, I asked to test it and we tried to boil a cup of water. The contents in the oven being cooked were not visible. Either the light was too dim or the shading on the door was too dark. I have never seen a Microwave where you could not view what is inside. I called GE Customer Service while the installers were there and they refused to allow me to keep it until a replacement was delivered. They had to deinstall it, re-install my old (non working unit) and take the new one back. I called GE with my homeowners claim info and they sent me back to the Homeowner Warranty company to start the claim all over. Ridiculous.Instead of a replacement they offered me a cash value which was 60% of what I paid the retailers. When I asked why that amount? They only provide the value based on what the Warranty company gets the products/services for (wholesale cost). Net: If I used the money to buy another product it would cost me out-of-pocket for replacement. I am hoping the new unit to be delivered in the next 3 days works better. Otherwise, GE has a significant design flaw that doesnt allow you to view what is cooking in the Microwave. If thats the case, why have a window at all? Fyi - My Panasonic Microwave in our basement is working fine.... and has for years.

A recall on a dishwasher: The heating element was replaced due to the fact they said it could catch fire. The bottom of the dishwasher is plastic. They replaced the heating element with the same kind of element that was there. How could that be any safer if the bottom is still plastic? I have children in the house; I feel this is a dangerous situation. I am dissatisfied with GE. This is the third dishwasher with the same problem in a matter of 5 years.

Update 4/14. GE finally conceded that the dishwasher is indeed broken last week, and set up a replacement unit to be delivered and installed. The company that delivered the new unit would not install it of course...why would they? So, we had to hire another place to install it. GE is supposed to reimburse us for the extra installation expense. Im glad it is finally resolved, but man, oh man...what a headache.

I purchased a GE Dishwasher about two and a half years ago. Recently, we found there was a small leak in the solenoid motor which caused damage to my floor. I looked up for the model number and it is not on the recall list. Now, I have to call the repairman. This should have never happened in two years. What is GE going to do about this?

It is a ten year old microwave and it works fine, looks dated and Ive never liked the start buttons location. We bought at the time of our kitchen remodel, good size and power for the money. Im sure newer models are just as good if not better.

Unit is only 7 years old and not greatly used (only two adults who dont use it much)… Purchased as part of package including GE refrigerator, range and dishwasher (already got rid of refrigerator, as parts kept breaking and unit had other chronic problems). I turned the microwave on to make popcorn - it immediately made a terrible noise and filled with smoke with an electrical smell. Unplugged the unit and contacted GE Repair. When I described what happened, I was transferred immediately to their safety unit because of the nature of the problem. A GE technician arrived today and almost immediately diagnosed the problem: a metal component that directs the waves of the microwave generation tube had burned out, and by federal regulation, he claimed, cannot be repaired - the whole appliance must be trashed and replaced. Once again, I have experienced GEs poorly engineered products that appear to be designed to fail in a relatively short time. Can you spell planned obsolescence? (No photo provided, as there is no external visual damage).

Adora Microwave - door falling apart: This microwave is supposed to be installed above a range. The materials are not suited to this. The plastic door has disintegrated. We have got through 2 handles. I took the 2nd one off to replace it and the plastic that holds the glass in place just disintegrated onto the floor along with much other plastic parts. Why is the door plastic in the first place if they cannot make it from a heatproof material? Only 4 years old and we are going to have to junk it. When the first handle failed under warranty GE said that it was not covered as it is a plastic part! They finally covered it after a long conversation.

I own a GE turntable microwave. Ive had it for over 10 years and it is still going strong. I purchased it because of the capacity, the color, the wattage and features. The wattage in this microwave is amazing. It doesnt take long for things to heat up. I highly recommend this brand because it is so durable and the wattage it has. The features on the microwave are easy to access and has more features than I normally use. To have this microwave for so long and its still works just like I purchased it yesterday. Great job GE for providing an excellent product.

I purchased a GE Profile Microwave 2 1/2 years ago and now it is shooting sparks out the back and making a loud noise. I have to admit that the microwave did work well and my mom even bought the same one because it was good. I never bought a GE appliance before because I was told they have a bad reputation. I thought the Profile Series would be better. Wrong!

My Profile dishwasher is not on the recall list, yet the heater element malfunctioned and did damage the entire inside racks and spin bar along with contents. GE told us to have their recommended repairman provide estimate. Repair guy estimated over $600 to fix. The unit was smoking hot which caused bubbling on the exterior and the dishes to show signs of burning. Well with estimate, GE is offering a discounted top of the line dishwasher for over $600. Pretty sure, I do not want another GE. Also, when I told the agent that I was afraid that if I had not been home, it may have initiated a fire, she said it would not have happened. Really?

I will never purchase GE appliances again, have trouble with refrigerator/stove & dishwasher. Dishwasher is so loud that you cant be in the kitchen when its on so I only use it at night. It doesnt clean good & everything about it is wrong!

Have had my GE dishwasher for 15 years. Had initial problem with inner liner pulling away but got GE to replace unit. Has worked fine ever since. Nothing fancy just gets the dishes clean. Would have liked a bit more adjustability with the shelves.

We have a five-year old GE Profile Microwave that has an LCD panel. It is a nice feature, but it has become unresponsive to touch and now will cost us $500 to replace the LCD panel. We will just buy a KitchenAid instead. The LCD panel is not sealed, so when you cook, even using the exhaust fan, the moisture gets up in there and damages the panel. This is such a terrible design. We paid $600 for this microwave thinking it is a good quality appliance. Never buy GE! I was in Best Buy yesterday and told people who were there looking at microwaves. Terrible quality! We have to purchase a whole new microwave hood range now.

My dishwasher broke within warranty in April 2014. The warranty expired on April 29th, 2014. Every 2 weeks another part was ordered to the tune of 10 parts and 8 visits (unpaid work days for me). I have been in touch with consumer relations about this and I was told that this would go on forever until their techs deemed the dishwasher as unrepairable but as long as it is repairable, they will not exchange the machine. And now they are telling me (October) that I could have had another service provider fix it but I would have to pay for it because NOW it is out of warranty. I cant wait until I replace my GE refrigerator and my GE microwave because those are the last GE products that I will ever buy. I went out last month and bought another brand as I will never buy GE again. GE protocol I am told is what determines all that happened. I suggest you do the same. I am writing a long letter to GE just to get it off my chest. Nothing will be done because its another corporation all about the money!!!!

We bought 6 new GE appliances when we purchased a new home. The reason: my husband worked for GE for 35 years and we wanted tell our friends how happy we are with them! Now, we are sorry we have to complain about the dishwasher (Model #GDWF160R1OSS). The only good thing about it is how quiet it is. We have tried many different soap products, a little soap, more soap, Rinse Aid, half clean or nearly clean dishes placed inside, only to have the glassware looking horrid, not clean and cloudy. Service man offered suggestions but none have worked. The stainless steel interior also looks horrid because of streaks. So much for energy efficiency when we have to wash all our glassware by hand to get the residue of soap off them. Another dishwasher we have had for 25 yrs. does an excellent job - so dont blame it on the phosphate removal from soap.