My life partner/bf moved into a semi flipped 10 yr old home. Every single appliance required to be replaced, everything from refrigerator, stove/oven, to dishwasher. We researched every appliance we purchased, a lot of time and effort along with reviews from various reputable reviewers, pointed us to the GE GDT DISHWASHER. Who can go wrong with three tier washing amongst jetted water bottle washers?After a 1 1/2 yrs in the top spinner completely separated from its housing. We googled the problem, GE said it was a faulty design, yet no recall. The door lock began to fail, googled the repair fix, another fault design, yet again no recall. Upper plastic door trim broke in half, solution, replace the entire console. Guess what? My solution here on out is to not buy GE products. If two years is all you get with a GE product, I am out! Done with your products that once lasted 10 to 15 years. The fact that have to research another DISHWASHER, absolutely pisses me off. I dare you GE to win me back!

Adora Microwave - door falling apart: This microwave is supposed to be installed above a range. The materials are not suited to this. The plastic door has disintegrated. We have got through 2 handles. I took the 2nd one off to replace it and the plastic that holds the glass in place just disintegrated onto the floor along with much other plastic parts. Why is the door plastic in the first place if they cannot make it from a heatproof material? Only 4 years old and we are going to have to junk it. When the first handle failed under warranty GE said that it was not covered as it is a plastic part! They finally covered it after a long conversation.

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

It works well. We like this newer GE Profile with many preset buttons such as for different times and food types, and defrost. The last GE Profile MW we got had a knob that got loose right away and hard to use, like a dial-up AOL, so this upgraded model is much more convenient. I like the bigger plate size, and that the turntable can be turned off if we put a rectangular casserole dish in there.

I have a GE dishwasher installed by our builder. It is 6 yrs. old and for 6 yrs. it has been a problem. I already had it serviced in last years recall and now I get another notice. It is located close to our TV viewing area. and is so noisy. I hate to run it when we are watching TV. I would never buy another GE. We are also having problem with our GE double oven. I ruined several holiday dinners before realizing the temperature was 75 degrees where it should be. A replacement part is almost a $1,000. I would never ever buy another GE appliance.

Dishwasher works fine; however, do not like the interior which is all plastic. It comes with several tray holders which I found awkward to use. I wish it took less time and water to get the dishes done.

The performance of my microwave is great - not fancy but does the job. Its size is fine as it fits just right where we wanted to put it. No complaints. I havent had any problems, therefore I consider it a great value. Plus, I would get the same size if and when I replace it!

Our microwave came with the house so we didnt choose it. Ive had a bit of trouble with the rotating mechanism making knocking noises a few times which Ive been able to finesse by exploring troubleshooting online. Other than that its been dependable for 4 years.

I purchased a GE Spacemaker Microwave model JVM 1750SP1SS from Best Buy in October of 2011. Just a few months after having the microwave, the handle came off. I called GE and they sent a technician and fixed it but it left scratches on the stainless steel. In addition, we have had problems with the turntable. Finally on March of 2013, the keypad went out. This of course is past the one-year warranty. I called GE and they told me that they could schedule a service call for $89.95 plus parts and labor. I told them that I could buy another microwave from another company for less than that would probably cost. This microwave was made in Malaysia. I would not recommend any GE appliances that are not made in the US.

RCA RMW953-White 0.9 cu. feet Microwave, 900-watts, 10-power levels, end cooking signal, glass turntable, 6-one-touch cooking menus, speed and weight defrost, cook by weight. Bubbles obscure text. I wanted a white microwave with a door handle, .9 and fairly powerful. I was glad to have found this microwave. But I dont know if the hole was there before, or my teenagers or I inadvertently put a small hole in the plastic covering over the control panel outside the microwave (NOT meant to be removed, I asked support) but now its become a larger hole as air got underneath. I cannot read the button text. I tried to cover it with scotch tape and thats not working.I searched and found out this is a common problem with GE microwaves. The buttons are very close to the bottom and therefore, countertop, so if you have a utensil or plate or something that sits near the microwave, it might nick the plastic coating. I called GE support (in India) and they said since its under warranty, I can return it. However Id have to pay shipping costs. Fortunately, I bought this at Wal-Mart (I hate to support this store but it was the only place I could find this style) and they have an excellent return policy and there is no charge for shipping. It was easy to call and request a shipping label within the generous warranty period. You might save yourself the trouble of a return or be very careful to not put a small hole in the plastic coating. Again, this is not protective coating for shipping, this is a permanent coating to protect the buttons.

Ive owned my GE Profile dishwasher for 6 years. Two months ago the pump had to be replaced and this is quite an expensive item. Then the other day I went to open the dishwasher and the doors spring gave away, hence slamming to the floor and crushing my big toe. The repairman said it was not the spring that broke but the link that holds the spring in place. The spring is actually quite strong but the link is just a flimsy piece of plastic. We are both anxious to see if the replacement link he ordered has been made stronger and are replacing both just to be sure it doesnt happen again. Although my toe isnt broken, it is extremely bruised and painful so I am going to be ever cautious of opening the dishwasher again.

I purchased a GDF520PGJ dishwasher from Home Depot and it still doesnt work. Home Depot has no return policy and G.E. has been unable to resolve. I have written to GE Appliances Consumer Relations for a replacement but pending another service call. Its unfortunate that there is no recourse with Home Depot as was advised that I need to work with GE for the first year warranty yet my dishwasher hasnt worked for the past month. Buyer beware.

We have a GE Profile Microwave (PNM1871SM3SS) that is only 3 years old and is reporting KEYPAD SHORTED - SERVICE MAY BE REQUIRED. We called GE service repair and told them the exact message. The service guy shows up and says all he has in his order is General other service needed and that he doesnt have the keypad panel. Gives us an estimate of $501 to repair it. Tells us a new one costs $400 and with a coupon he can give us it will be $100 less. We were charged $99 for this visit which basically lasted 10 minutes (way to go GE on making money off faulty devices you sell). The service-person also told us that the average life was 10 years for these, but this one crapped out in 3. He said if we get another GE microwave, it will fit right in there and that I can do it myself if I am handy but after reading all the reviews online, I am skeptical whether I should get a GE microwave again or not!

Purchased the Maytag MDB7749SBM stainless steel dishwasher in December 2013. The dishwasher and install totaled $700, which for that price and with Maytags past reputation, I wrongly assumed that the dishwasher would last a long time. In May 2016, slightly over 2 years, the dishwasher started having issues with the control panel. The control lock would randomly activate. I would have to reset the circuit breaker daily, leaving it off for around 10 minutes. Even with trying to go through all the steps to resolve the issue, resetting it from the circuit breaker, sequence on the control panel, the dishwasher wouldnt work. I called Maytag and after 40 minutes on hold, they finally answered. They wanted $89 for a service call and for the $143 part, plus labor. Might as well just replace it with another brand like GE, or Samsung.

One of the most disgusting situations I have ever been in. I purchased a brand new home with all new GE appliances. I have since learned that a technician was sent out twice prior to our walk-through because the superintendent noticed the dishwasher wasnt working properly. I registered all my appliances online. The first time I used the dishwasher, it flooded the kitchen floor, causing the builder to have to repair baseboard and drywall. A technician came out and repaired it. I used it an additional two times and each time I did, it flooded my kitchen and a repairman came out. After the second time, I contacted GE customer care to open a case. The third time, I requested a new dishwasher and the customer care agent, Stephanie, stated that my new dishwasher was a discontinued model and so she suggested one that was a slight upgrade. I agreed to this change and she informed it would take approximately 24 hours to have it approved. I have since talked to seven different people at GE customer care. This was started when a company called Barlows Distributing showed up unannounced at my front door approximately hours after my discussion with GE. They said they were here to install my dishwasher. I was rather shocked, said the timing was impressive, and let them in the door. After they had drained the water standing in the then current dishwasher, they started to put in a replacement. I looked at the box and realized they were placing the same model in. I told them that was unacceptable, because according to GE, I was being approved for a different dishwasher. I then told the tech to stop installing it and called GE. GE had no idea where this dishwasher had come from. Then an unavailable number showed up on my cell phone and when I answered it, the woman spoke my first name and started talking about my dishwasher, stating the builder had ordered a new one. I asked her who she was twice and she would only tell me GE customer care and not her name. I have since learned her name was Julianna. She said that I had to take this dishwasher or I wouldnt have one at all. I took this as a threat. After spending countless hours on the phone with GE opening a case and discussing the issues, picking out an acceptable replacement, I was then told the builder made this decision. Not only was I thrown from person to person over a discontinued model, I was threatened, and further was told by the superintendent of construction that once the dishwasher was installed and we closed on the house, I had to handle all problems through GE. I own the dishwasher, not the builder. I registered the warranty, and I handled it through the proper channels. I feel I need an explicit apology from GE. One of their arms doesnt know what the other arm is doing. During this entire time, I had little use of my right hand and seven fractured vertebrae (for which I am permanently disabled) and had to physically wash 10 boxes of dishes that had been packed up due to our move and stand while doing it. GE has caused me property damage, stress, and severe physical pain, yet threatens me and yanks me from person to person.This is my house, my dishwasher, and this matter should have been handled directly with me, instead of inviting someone into my house that I had no connection to or knowledge of. The really sad thing is that I just purchased and had installed a $6500 water softener and reverse osmosis system for the whole house, manufactured by guess who...GE.

Our stainless steel finish 1100 watt JES1142 microwave is around 2 years old. Within the last year the finish inside started to corrode (yes, my wife cleaned it regularly with a non abrasive, appropriate cleanser). Also, the door latch button started sticking and a few days ago it just stopped heating. Unfortunately I cant find my receipt, but I bought it at my local Lowes on Bell Rd. Nashville TN. Serial # is MA212483G. Manufactured July 2013. Was this just a lemon? Very disappointed.

We wrote to GE regarding the issue with the dishwasher and, after some phone tag, a certified GE engineer came to the house, diagnosed the problem and ordered all the replacement parts. This morning, they came by to install and essentially rebuild the entire system with the exception of the stainless steel. Overall, we are very happy with the outcome. With all the negative issues GE experiences online with regard to the Cafe Series, I give them a solid 8 for responsiveness and taking care of the situation. Perhaps ours is a rarity, but if you approach them logically and with facts, they seem willing to work with the consumer. Heres hoping the system cleans better now too!

Worst experience ever. Bought the dishwasher in Jan 2014. The washer does not wash. Three different technicians have passed by, cant fix the machine. Awful customer service, routine answers, file not assigned, cant talk to a manager.

I bought a whole line of GE Monogram appliances for our home in late 2005. These appliances are not even seven years old and I have had the side-by-side fridge repaired several times with no true fix to the problem. They charged me to repair the tank in the fridge that the water line leads out from and into the freezer door. Another repair man said that was never the problem and that the seal on the freezer door is broken from inside the door (a common problem) and freezes up the water line, so no filtered water comes out. They wanted to charge me $800 for a new door with no guarantee that it won’t happen again!My cook-top downdraft has shorted out three times because of a faulty design issue. Water and moisture can get up under the switch, which shorts it out. There were three different repairs for the same issue. Last time the same service man repaired the problem and he was so careless. He got silicone all over the granite counters and switch, which he didnt check before leaving! I called him back to my house before he even got out of the neighborhood. Ultimately, he admitted he screwed up and ordered me yet another switch. Now, just today, my Monogram dishwasher started billowing black smoke. I called GE to find that the unit has been recalled for electrical shock and fires. They said I could have it repaired (if the service man deems it repairable) or it’s $400 towards a new unit. Is this company for real? How many consumers do they have to lose before they wake up? If I werent home my house could have burnt to the ground or, worse, one of our kids or us could have been severely hurt or worse. Do they not realize the liability they would have at that point if the worst would have happened? And they have two phone numbers and my address on file. Why on earth would they not contact me to tell me of the recall? Are they holding their breath and crossing their fingers that nothing too bad will happen? I have a Whirlpool fridge/freezer that is 18 years old and in my garage; nevertheless, it has never given me an ounce of trouble. I will never buy another GE appliance again and will tell anyone I know the same, including the several new home builders I work with. There are too many other companies out there that will back up their quality products. I have called into GE on my latest problems. And if I dont get satisfaction (i.e., brand new units), I have no issues contacting the attorney general. There are forms online that can be downloaded so a formal complaint can be filed. I urge anyone else to do the same.

I am a licensed master plumber. I do a fair share of high end kitchen installs, I noticed that in the last 5 years that all GE dishwashers I installed had a whole lot of extra parts to be installed by the installer. For example. Today I uncrated and tried to roll a GE dishwasher I got 6 and a drip tray fell out. Then when I went to install the dishwasher in the cabinet I had to install 4 different rubber flanges. When I went to push the dishwasher in the flanges came loose and hindered the install. The the insulation jacket kept binding up. The last 10 of these GE dishwashers I have installed the dishwasher appears to be racked or not square. I had to tell the General Contractor that I dont want to install the GE dishwashers any more. Way too much trouble. I have much better luck and ease of installation with Miele and Bosch. The GE dishwasher are very frustrated to install. Bob Licensed Master Plumber since 1982Richmond VA

My GE microwave (Model: JVM1540SN1SS) that I bought new two years ago for $250.00 broke already. The table doesnt turn and nothing heats up even though the timer works. There are only two adults in the household using it, and we dont even use it very often. I find this pitiful service. My last microwave lasted about 15 years.

I have a GE microwave and was using the exhaust fan on it when it stopped working. I am getting the same message as other folks - KEYPAD SHORTED. I have barely used this product since it is in a vacation home. It looks brand new, but I am really disappointed in it. My cousin told me shes had problems with GE appliances and will never buy another.

We purchased a new home November 2013, which came with all GE appliances. The problem is the dishwasher racks. The plastic has fallen off the metal, and the metal has rusted away leaving nothing to hold the dishes in place. I contacted GE and they said it is out of warranty. A new rack is over $100.00 and now I see the top rack is rusting also. I have never, in my seventy-eight years such junk. I am surprised GE would put their name on it...

We purchased a GE microwave/convection oven which developed peeling on the inside top of the microwave. GE contacted me and offered a replacement ($300 toward a shelf model or prorate the microwave/oven). Why would we take $300 replacement when we paid nearly $3000 for this oven???? So we took the prorated one directly from GE. We felt confident that we would not have a repeat of the problem. The oven was manufactured in December 2012. After it was delivered, I noticed a rough area on the turntable; and after the oven began to peel AGAIN on the second oven, I believe that the rough area was due to a remanufactured part on the oven.Now we are stuck with another microwave/convection oven combo with the same issues as the first oven. I never used anything harsh to clean the oven and now this happens again. Why cannot this company manufacture an oven that will not have defects in it??? I am tired of peeling paint on a second oven when I have done nothing except pay them for 2 ovens. Why cannot they use stainless steel interiors, and this would stop the many complaints that people make about the product. I would NEVER again purchase another product from this company. The products I have purchased have been inferior. I paid for two microwave/convection ovens and still have one that is inferior!!!!

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

This microwave (jvm1540dm5ww) works fine but the plastic door is fracturing into bits. I expect this is because of faulty plastic in China. Cheap alternatives for fast profits. The machine is out of warranty. Replacement door is almost 160$ with shipping. Planned obsolescence by corporate America. This machine works fine but is a waste because I don’t trust the replacement materials to be any more stable. I rated this a two because the actual operation is fine. Sorry GE. I will not buy your brand.

I have a GE microwave. It stated that I had a 10 year warranty on the magnetron on the computer website. Now GE says its not warranted. I have owned this microwave for a little over a year and its pile of **. All they wanted to do is sell you their products and they dont stand behind what they make anymore. Nothing is made to last in this time and age. I will never buy GE products from Home Depot again.

I purchased a GE over-the-range microwave in 2008. After 3 years, the magnetron went out and the microwave stopped heating. I called GE repair, and they told me it would cost over $300 to fix - close to the cost of a new microwave. Stupidly, I bought another GE microwave in August 2011, model JVM1750DP1BB. In the one year Ive had it, it has broken 4 times. One time, it was the magnetron (seems like a common problem). Another time it was the motherboard. Another time, it was a bad wiring problem. Each time, I called the GE repair service, and it takes 1-2 weeks to get an appointment. Twice, they cancelled my appointment on the day because they overbooked. Given that I had to take time off work for the appointments, this is a huge inconvenience. I have been waiting over this last time for an appointment, after they again cancelled my scheduled appointment. GE makes a terrible product, and their repair service is a joke. I bought GE because I wanted to Buy American, but they have completely turned me off. Think twice about buying GE! You will waste lots of time and money.

A small black piece of plastic, which snapped into the back of the microwave handle has bent/shrunk, and popped off. My microwave is just a little over one year old. I called the GE 1-800 phone number for parts, and GE does not offer a replacement part for this, without buying a whole new replacement handle, which costs over $160.00.

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

I purchased a dishwasher and it doesnt dry the dishes. It leaves the dishwasher and the dishes wet. I was told they have a fix. However, nothing has been done. If you want wet dishes, dont buy. They told me to raise my water temperature on my hot water tank and to run my sink water until it goes hot. They told me to buy Rinse Aid. Well, I did it all and it still doesnt dry. This is an energy saver appliance. Ha, ha, its because they are saving energy at our expense.

GE over the range microwave JVM1540DP1WW - Within 1 year, the magnetron failed. I called the Sears service department to fix it. Because of that, I bought 2 more years of extended warranty. Three months after that, the microwave turned on by itself for 1 minute nonstop. I had to unplug it and call the service again. It would also turn on even when the door is open. Its very dangerous for microwave exposure!

We renovated our kitchen with all new GE Profile appliances in 2017 before moving into our new house in 2018. Nov 1, 2018 our GE Profile stopped working and showed a leak message. We called GE who referred us to A&E Factory Service. The repairman arrived Nov 6 and proceeded to not be able to pulled the dishwasher out and tell me the list of things he wont do because of policy. Without inspecting the dishwasher but looking at his computer with the list of things that could be wrong, he said he ordered two parts and would return on Nov 23. Nov 23 came and no repairman. Calls were placed to GE Parts and Service who expressed their disappointment over the no show then proceeded to say that parts would not arrive before Nov 30 and that one of the parts was on back order. Once the parts came then another repair appt could be made. I will have been without a dishwasher for over a month with no alternative recourse. Service response and A&E Factory Service is less than poor.

I purchased a GE dishwasher model GSD2100v50BB on June 6, 2016. By March 9, 2017, a switch broke which caused the machine to be stuck in the wash cycle for over an hour before it was discovered. This caused soapy water to flow out of the machine all over the floor. It was fixed under warranty but by June 29, 2017 it broke again. It is no longer under warranty and it will cost $70 to 100 to fix it again. It was purchased at Home Depot and they state it is to be handled by GE. GE states that since a year has elapsed, they are not responsible for the repair.

Purchased the cafe dishwasher in March. We are now on our second one as the first did not work and now this one does not work. It worked fine for the first couple of months and now it’s doing the same thing as the first one. Pump is on the fritz apparently. Truly disappointed. We owned the cafe dishwasher at our last house and loved it so we made sure that we purchased the same one when we bought our new house.

I like the electronic beepings that let you know your settings, and it can be changed to your preference. I inadvertently hit the settings button and turned off the beeping and I thought the microwave was failing after only 3 months, but I discovered my error, fixed it, and all is well.

Ive had my microwave for 12 years. Ive never had any problems with the microwave since its purchase and very pleased. I dont plan on replacing until the microwave would stop operating or not pleasing in the kitchen.

Ive had this stainless steel GE Dishwasher model GDF645SMONES with the controls in the front for nearly a year. The dishwasher constantly comes on with the slightest accidental touch. However the buttons that control the cycle settings are extremely difficult to operate to cancel the lock or delay hours features. I have to literally bang on the buttons to get a response. My thumbs are now sore from the constant pushing to cancel that lock and delay features that came on accidentally. Once locked, good luck in canceling anything. Im so disgusted with this $600 dishwasher. Complaints to GE and the so-called warranty company that turned out to be one and the same, have fallen on deaf ears from the day I got it. Do yourself a huge favor, do NOT buy this dishwasher. Customer service is awful.

We built a new home in 8/19. Much to our dismay, the builder only offered GE appliances. We had a bad experience with a GE appliance in the past so we went with the most expensive offered, the Profile series. Nine months into our new home, the microwave push button to open the door broke (with food stuck inside). I was only able to schedule an appointment through an automated system. Days later, repairman breaks door trying to get food out. Parts were ordered and new date was set for one week later. Day before that appointment, I got a call canceling my appointment due to the part being on backorder. The entire call took 57 minutes. New appointment was set for an additional week. Again, appointment canceled and part was ordered from third party. Third appointment was a repeat yet again (but without a call and with repairman showing up). The rep did say she would send $70 for us to buy a small microwave while waiting. We are now at three weeks without our microwave being fixed and I have spent HOURS on hold trying to get to a resolution. Last representative asked why I even made an appointment if I didnt have the parts. What!! They have scheduled the appointments. I asked to talk to a supervisor but then was told it would be 24-48 hours before someone could call me back. The rep said this is the timeframe they quote for a callback but she didnt know when anyone would actually call. No idea how much longer we will have to wait-it seems we are at their mercy. When buying new appliances in the future, we will ask who services their warranty! Either way, we will never buy GE appliances again.

GE is a very reliable name brand with history to back it up. I’ve used their washing machines for years and only changed out once due to newer features. I had Thebes first washer for at least 10 years, maybe a little more. It only needed one part replaced, that was the capacitor, otherwise it was still usable. I am not an in depth handy person but I will read and do my research and found directions doable. Additionally, I found the service help desk very informative and that’s how I discovered it was the capacitor that had gone bad after washing clothes for so many years, and believe me, I did a lot of cycles with my kids and family. I feel I got more than my money's worth. Lastly, I’m still using their products to this day. I may not have the frequency because we are empty nesters but I still believe in their products,

This GE CVM2072SM1SS Microwave (over-range model) worked fine for five years. Then, we discovered the plastic film over the touchscreen starting to peel. After a bit of wrangling with Consumer Relations, they sent me a replacement touchscreen. The LCD didnt display properly, so they sent me another one. It worked for three months, then in the middle of programming to reheat some food, we got the following error message: Control Fault, Shorted touchscreen - F10. The control has detected a shorted touchscreen and has shut off the oven. It may still be possible to use the oven. However, if this message continues to appear, your oven will require service.The only way to clear the message was to unplug the unit. No amount of replugging in cleared the message. I called GE and they said they would replace the entire unit with a new model under some program they had. Sounded fine to me. I left the house. When I returned, I received a message that their representative called back to say they would not replace the unit, since the program had expired. Huh? I called again, and after a bunch more wrangling, they agreed to send a service tech out and replace whatever needed replacing or fixing at no charge. Of course, they never really made a notation of that, so when he got here, he had to get on the phone and sort it out. Finally, he replaced the touchscreen. Lets see how long it lasts this time.

I purchased a GE Microwave oven, model #JVM1540DP1BB and, in seven months, the interior paint started peeling. I contacted the company and they said, go ahead and use it. It wont hurt anything. (Well, actually, it doesnt heat as well now.) They offered me a discount on another GE Microwave. I advised them that the oven was manufactured three months prior to my purchase and so the Microwave was only ten months from birth to death - it was also made in Malaysia and so was purchased practically straight off the boat - and should have been covered under warranty. The response to that was, Im sorry. Im only authorized... Fine. Let me talk to your boss, I said.I was connected to another company mouthpiece who promised to send a serviceman out to look at it. The next week, said serviceman did come to the house. He told me they could take it in and ...see if they could fix it or they could give me a discount on another one. Again I iterated that the microwave should be replaced at no cost. He flat out told me, They wont do that.My next fiasco with this danger trap was several months later when it started turning on of its own accord. So, we had to keep the oven unplugged at all times unless actively in use. I again contacted GE and was again advised that they would be happy to offer me a discount on another... blah, blah, blah. After a couple of years of using this machine, I called GE one last time. I spoke to the regional vice-president, Gary **. The response this time was truly mind-boggling. They had no record of my having called previously!!! But, after telling them I felt their product was inherently defective by design and, not only would I never purchase another GE product EVER, I have emptied my house of any and all GE products right down to the light bulbs, have purged my mothers house, and advise everyone I know of my experience, recommending they, too, do not patronize GE.He began repeatedly screaming at me, What do you want me to do? I told him that, two or three years previous, I wanted them to replace a defective microwave. Now, and following their abhorrent customer service, I wouldnt want anything from them and, if they were to tell me the sky was blue and water was wet, I would not believe them. I was not inclined to pay six hundred dollars yearly for a new microwave oven, so there was nothing they had I would ever want. I then pointed out that I purchased a Sony microwave for my mother when my grandson was six years old. Hes twenty-four now and both the id and the oven are still going strong. Then HE hung up on ME! I have noticed others here who have had similar experience with GE Microwaves so my recommendation to anyone considering a new microwave oven is to steer clear of GE at all costs. I only gave them a one star rating because I couldnt give them a negative star rating.

I bought GE dishwasher model #GDF570SGJOCC from a local appliance dealer in April, 2017. The machine cost about $600, and $150 to install. Today I learned the circuit board is caput and it will cost $600 to replace it. I will never again buy a GE product-- 2 years of service and it needs to be replaced.

Had model JES1460DS3BB less than 2 years. I started to smell burning plastic when using it. Research tells me the wiring is burning up. Im sick and tired of GE appliances. Ever since my GE toaster caught on fire in 1969 Ive had bad luck with GE. I gave the company another chance when I bought this microwave. I will never buy another GE appliance - large or small.

I purchased a GE dishwasher on March 15th 2018... The first dishwasher I received on March 23rd was obviously broken. The dishwasher setting piece was completely broken off and the sides were dented and looked like it had been dropped. Ok. The delivery guys immediately called it in and reordered another one for me. A week later the second dishwasher came, it looked fine from the outside so I signed for it. Once I opened it I saw that the top rack was missing wheels and the second shelf wasnt even connected to the dishwasher. I called and a week later they came and got it and left a new one. I asked the delivery guys to unpackage it and look inside. Immediately the top arm cycle fell off and the HE symbol at the bottom popped out. They assured me that was normal... When the install guy arrived a week later he said he thought everything looked ok. He ran a cycle, then left. Before he was out of my driveway the cycle arm/water sprayer fell off and water sprayed everywhere... I brought the piece into Home Depot and they told me it was broken (duh) and they would order a new one. NO. This was going to be the fourth time I will be taking off work to deal with this dishwasher! GE is absolutely gone down. The products being produced are either being sabotaged by the employees from the Ohio plant, who are all losing their jobs because the plant is about to get shut down and is going to be moved to Mexico or GE is absolutely horrible at business, design and producing quality appliances.Regardless, I will NEVER purchase a GE product again and would never recommend to anyone to purchase a GE appliance! I am going to get a refund and insist compensation and inconvenience fees! I had to take off work 4 Times, had to cancel plumbers 3 times (still was charged). I lost money from my work, time from life and a month without a dishwasher. Also, a month with a broken one sitting in my living room because they wouldnt come get the 2nd and 3rd broken dishwashers until a I ordered another one and had that one delivered before they got the broke one(s) out of my house. I had broken dishwashers sitting in my living room for a month. Easter was quite embarrassing with an appliance next to the table to say the least. DO NOT PURCHASE GE APPLIANCES!!!

Nothing but trouble with dishwasher. GE service is a disaster. Design flaw that is forcing me to purchase another dishwasher. Dozens of call to and from service have not yielded any results. Finally a contracted repair person made it to repair dishwasher and told me it would fail again because of the design. Avoid GE appliances at all costs.

Always works well, cooks great, could use a little more space. Had GE microwave in the past and it never let me down. Had this one for 2 years now and no problems with touchscreen, door hinges or settings. Owned Maytag before and had nothing but problems.

My microwave on the inside paint start peeling off. I have this appliance 2 years, it has slowly been peeling since that time and now it has completely peeled and rusted on the inside. This WAS a gift. The outside looks great, the inside is so bad. The serial # is LT914637B model JES1451DN1BB manufactured in 2010, Made in Malaysia. Be Louisville ky 40225. Does the united States make anything except make us pay taxes. This is a piece of mess. The last 2 years my husband he suffered with LLC. Now I got to deal with this. Poor workmanship. I want GE to give me my money for the MW or total replace it. Rate 0.

2 year old GE ADORA dishwasher - I am so disturbed tonight after seeing what happened to the protection rubber that is on the exterior of my dishwasher. I decided to buy a new dishwasher because the bottom tray would not stop when pulled out at the correct stopping point. Today I got my new dishwasher installed and when the installers pulled the old one out I was shocked to see that the protectant that I would assume was placed to protect my house was melted all over my wall behind the dishwasher. WOW. Talk about a MAJOR fire hazard. Thank God my house didnt catch on fire because of this faulty equipment. Check out my pictures and you will see the pile of protectant that was under, on my wall, and behind the dishwasher once it was pulled out. Sincerely concerned.

I purchased a GE dishwasher 1.5 years ago and it has been nothing but a problem since day one! The door will not stay latched and the dishwasher is perfectly level. You might get 1 or 2 washes in before you have to work on it again. We bought a set of appliances from GE and the stove and refrigerator have worked well. However this dishwasher is junk and I based on my experience I would not recommend this product to anyone!

Its been a decent dishwasher. Usually residue left on something. Even with rinsing. And weve tried all brands of detergent. Rinse, China, speed cycle, normal, pots/pans and anti-bacteria cycles. 9 hour delay and extra hot wash and heat dry settings. It works for our family. A load every 2 days or so. Its almond/bone colour. The hoses are flimsy. They seem like they could leak at any moment. Not sure Id buy another GE.

My Microwave oven is 22 years old. It still works fine, but does not have power levels on it. The reheat is vague and I have to keep checking so things dont burn or dry up. The dishes get very hot after about only three minutes. Other than that, it is easy to clean and still looks good.

Ive been battling this dishwasher since it arrived 9 years-ago. It was a warranty replacement we were stuck with from GE. Plus, we paid $300. We could never get it to clean dishes, no matter how we loaded it or what we used, so we gave up and hand washed dishes for years. This year, I am committed to getting the dishwasher working because of hand eczema. I took it apart and cleaned the sprayer arms, filter & wiped it down completely. I also ran a dishwasher cleaner through it. I finally got it to clean dishes, but only if they are thoroughly rinsed first and on the Pots/Pans setting. After a month, it stopped cleaning my dishes again. I took apart the dishwasher again, and cleaned everything. Now, glasses on the upper rack in the back are not all getting clean. I never overload it. Im convinced that GE Dishwashers are just junk. Someday, Id love to find a dishwasher that actually works. :-( Frustrated!!!

Does not clean well nor dry well even on the more powerful cycles. I rinse off all the food and if anything is accidentally missed, it just gets baked on. Very disappointing. Also much of the upper rack item remain very wet at the end of the cycle. Drying issues: I use the most powerful drying cycle option but contents remain wet at the end of the cycle, especially plastics and top rack utensils. Not just damp, but large drops of water remain. Cleaning issues: Even when I use the heavy cycle, unless I remove all traces of food from the contents, the food remains and worse, now baked on. This model has a sanitized cycle so basically I use this dishwasher to sanitize only rather than clean, dry and sanitize. Completely unacceptable.

My GE dishwasher is just OK, I would say. It saves water and money. It is fairly efficient to load and pretty effective at washing on normal but many times I need to hand wash the big or hardened food off the dishes before loading, which feels like more work than should be necessary. Id rather not wash my dishes twice.

Purchased new GE dishwasher after previous model lasted over 11 years. Family eats most meals and home and typically runs washer at least 4 times per week. New model was upgrade with stainless steel interior and all the efficiency upgrades from technology advances. Ran great for first 18 months then suddenly we opened one morning and notices water standing in bottom of machine. Emptied dishes, re-ran with same result. Technician called and spent an hour diagnosing to determine water pump, control board and wash motor would all need to be replaced at a cost of nearly $600 or 75% of what we paid for the unit new less than 2 years ago. Simply unacceptable that GE would produce such an unreliable product. We will be replacing with a different brand and would tell anyone to avoid GE dishwashers.

Not a very good job at cleaning, plus takes over two hours to run. It has a steam function, to help clean grease off of dishes, and should be used for simple cleaning too. Although the instructions state it can hold settings of 8, we have never been able to use more than 4 before it is packed. The utensil holders are almost useless. It has nice lighting for controls and a clean front. The installations instructions are not very good. They also did not include an elbow to connect to the water supply, which the hardware store manager said is standard connection, so GE just wanted to save $4.00 and piss off the customers instead.

Called out GE service tech to diagnose my dishwasher which was not draining after the wash cycle ended. Was told it was the control board and it would be best to buy a new dishwasher. Purchased a control board online (was a GE original part for a lot less than the GE price) but it did not solve the problem. After researching the problem online, I found out that it could be the drain valve. Sure enough, bought one for $14, installed it myself and the dishwasher works like new. Called GE Service to try and get a refund for the service visit ($89), was told that I had 30 days to have the tech come back out at no charge. Tech never advised me of this policy and GE will not refund my money.

The GE repairman just left. It wasnt the coil that was flaking, it was the eco dish washing detergent I was using. The detergent wasnt dissolving, it was clogging up the jets and burning on the coil. What I was seeing was black burned detergent flakes. The repairman gave me citric acid to use to clean out the clogs (for free). He also didnt charge me for the visit, even though it was my fault. He also told me to get the water in my sink really hot before I start the dishwasher. I am very impressed with his service!

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

GE brags about employing its own service technicians yet, when I called to schedule an appointment to fix our Advantium 120 microwave (3 years old), they told me that unless I provided proof of purchase to the technician, he would charge me even for parts under warranty such as the magnetron tube. This in spite of the fact that they have all the purchase information at their fingertips, as I reported when we registered our purchase. They even told me our date of purchase, had our address, email address, etc. They dismissed my suggestion that an email from them to me that I could show the technician should suffice. After 3 years and severe family health issues, I have sadly misplaced the proof of purchase, not realizing that registering the appliance for warranty provided no real benefit; not even proof that I didnt steal the thing. I am saddened that a company of the former stature of GE would stoop so low to avoid a legitimate warranty repair.

Not even a year after purchase of new cafe series dishwasher, stainless lining rusting. Service called, GE tech agrees rusting of lining, GE warranty says not under warranty. Ive replaced screws that show signs of rust with aftermarket stainless screws. Cafe oven has had three front knobs just fall off - two were repaired under warranty and had to purchase extended warranty on third because it was more cost effective. Cafe Refrigerator had drain plate in back of unit completely rust away, tech knew what problem was before he stepped foot in my kitchen, he told us this was common. He caulked some sensor inside fridge box during service, I asked why, his response was its a design flaw and unit will operate better with this modification. Oh and redesign the ice dispenser, its tilted towards the back of the freezer and the ice is dispensed out the front.

On 05/04/2014, our GE microwave over the stove unit burst into flames. My wife was sitting in our family room and heard the microwave fan start (spontaneously). Then she observed flames reflected in the kitchen window. When she went to the kitchen, she observed the interior of the microwave was aflame. The fire was extinguished with a spray bottle of water. The burning items appeared to be insulation. The fan from the microwave was with the burning insulation on the rotating plate.

We bought the GE Potscrubber in 1997. It’s still going strong and our dishes and serving platters come out spotless. We did have to replace an inner seal once, but the part was easy to find and inexpensive, and my husband was able to put it in himself by following instructions on YouTube. We bought this before the stainless look became big but the shiny black exterior looks fine next to our new black stainless stove.

We purchased a GE Over-The-Range microwave, model LVM1750DM1BB in late 2008 and had nothing but problems with it, from paint peeling off on the inside to buttons which did not work, to burning smell, until it finally quit completely. Nothing worked, nada. This was not a cheap microwave and, added with installation expenses, was a major purchase. Even so, it would cost more to have it repaired than the original costs combined. This is criminal, a total rip-off!

I purchased my GE profile microwave in 2010 when my kitchen was being redone. I picked it for its style and the GE reputation. So far after 9 years, I hope this wont jinx me, it has been a wise choice. I use it daily.

We have had multiple service calls where the tech explains immediately that he knows what the problem is, where there is a very loud buzzing noise as if you were going to be shocked by the microwave if you touch it while it is running. Now after fixing this problem multiple times, having the display burn out, etc. tonight we find out the microwave is actually turning ON when you open the door! This is a severe safety hazard! The interlock is doing exactly the opposite of what it is supposed to do!

My experience with GE over range microwave oven (built in) as follows/ Unit Mod.JVM3160RF3SS. Ser.#GG248367A, this unit was produced April 2016. Review February 28, 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. New home with dedicated circuit = Yes. Online Problem shows indoor sensors interlocks not adjusted properly. Troubleshoot fee minimum $99 with parts estimate $250.00. We have been limping along for two months with frequent trips to basement resetting breaker, now the breaker trips when activated. Same thing happens on multiple circuits, via extension cord trial. Next step purchase NEW MICROWAVE that is not GE.

I bought a GE stainless steel over the range microwave vented oven in may of 2012. At 24 months, it caught on fire while cooking a bag of popcorn. Fire shot out of the side of the microwave. I shut it off but it still shoots fire out if you try to use. The warranty on this unit is one year. It is unrepairable.

My husband and I enjoyed our 1980s White GE Microwave and Stove/oven. But, after 15-20 years with the same appliances, we finally saved up for upgrades and purchased a new Stainless Steel (mid-range priced) GE Microwave and stove/Oven. I cannot begin to describe our disappointment. The Microwave is above our Stove/oven. Our old microwave had two powerful lights underneath it - one on each side. This microwave provides one small, weak light that does no good any time of day. Why would GE go from two great lights to one middle useless one? Also, the faint white numbers on the front keypad of the microwave are barely visible during the day - forget about seeing this when the light is not perfect. I foolishly assumed these numbers would be backlit on a black background. Onto the Stove/oven. The temperature is not accurate but that is something we can deal with. After the oven is pre-heated, the assigned temperature stays on the display pad - NOT the actual time. Who cares about the temperature you set the oven to - dont we all need to know when to check or take out our food? Our last oven always showed the time. We did not join the Stainless Steel bandwagon 10-15 years ago when others did - which we thought would be good for GE to get some kinks out. I Guess we should have waited 10 more. Proper lighting on your Microwave and The time on your stove/oven while cooking are not too much to ask for when we just dropped at least 2-thousand dollars!!!!!

Today I heated some spaghetti sauce in my microwave and it splashed, so I wiped it out. My microwave is built in and was pretty new and in the house when we bought it 4 years ago. It is in the base counter so I have to reach down to clean it. l havent had a problem with it but when I wiped the inside top I felt bumps and when I looked at the cloth to see what was on it, there was paint on it. That has never happened before so I of course looked and there is a fair amount of peeling paint in one spot. I have had microwave ovens for many years. Never had this problem with any other brand. What is that?? Can it be fixed? Is it dangerous???

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

We purchased a manufactured home that had brand new, GE appliances in it. We have been in the home for almost two years, but the dishwasher has never worked well, at ALL, even when it was brand new. We called GE and they sent a local appliance repairman to our house. He said that there was nothing wrong with the dishwasher. They are just junk. Amen! I have tried running the water in the sink until it is hot before the dishwasher fills up, we have tried using a citrus additive that is supposed to help it clean better, we have tried several different kinds of soap, NOTHING works. It never gets the dishes clean, there is always residue and food left at the bottom of the dishwasher, and it runs for hours on end. I cant wait until I can get rid of this pile of junk and purchase a Whirlpool or anything else. I will never purchase GE appliances, EVER!!!!

I wish I had found this complaint section before I purchased my microwave. Bought model HVM1750DP1CC in May of 2010. Now, 3 years later, all of a sudden theres no power to the unit. The wall outlet is fine. There were no storms around here when it went out. It just seemed to fry itself! The repair/troubleshooting instructions tell you to get a licensed technician to check this and check that because of the voltage. They give you a flowchart to troubleshoot it yourself, but no pictures to go with the diagram. Sure I can check the fuses, if I knew where they are!GE - NEVER AGAIN FOR ME. Wish we still had good-valued products Made in the USA. This one is made in Malaysia. NOT WORTH IT. Time to sell the GE stock too. Their products suck and class action suits will probably follow. Kris is Pissed!

I have a new house (2 years old so out of warranty) and the kitchen has GE appliances that I choose. I hate, hate, hate them all! I have had problems from the first week in our home with the stove, microwave, refrigerator and dishwasher. I am so sorry I choose this brand! Today my dishwasher (for the 3rd time) isnt working. GE wanted to send their tech in a week. Then another week to get a part. I am so frustrated that I said forget it and called a local repair company. This is Friday, they will be here on Monday. I spent 2 hours on the dishwasher today. They had to replace my refrigerator and cooktop. My microwave went out 5 days after we moved in. Took 2 weeks to get it fixed. DO NOT BUY GE!

One needs to be a contortionist to replace the under light bulbs on this microwave. It is a TERRIBLE design. Why werent the sockets placed so that the prong holes could be visible? One has to do a back-bend over the stove top and then the socket holes are still not visible. DO NOT BUY THIS MICROWAVE. DONT BUY THE STOVE EITHER. IT IS DANGEROUS. THE KNOBS TURN EASILY AND OPEN THE GAS.

GE Dishwaser Model # GDT580SMF2ES - My husband and I purchased an entire suite of GE Slate appliances in 2015 when we built our custom home. We purchased the refrigerator, glass-top range, range hood microwave, and dishwasher. We have experienced problems with the refrigerator Model # GFE28HMHCES twice. A horrible rumbling sound, which they came out and repaired promptly. However, more upsetting is the constant problems we have experienced with the dishwasher. The door gasket broke, which we were informed was not covered under warranty, and most recently the dishwasher stop cleaning and will no longer dry. We have done everything to rectify or repair the situation ourselves, and since it is no longer under warranty, we are left with an appliance that we either spend more money on to repair or toss and buy a new one. NEVER AGAIN WILL WE BUY GE!

GE Quiet Power 3. I overall like the dishwasher. It does a good job of washing the dishes, but not a great job. They need prewashed if very dirty. The soap dispenser often cakes if using powder. It is quiet. Cannot tell how much time is left on cycle.

I have had my GE microwave for over 6 years and the paint is flaking off the inside of the microwave, causing a health and fire hazard. Paint chips in the food and bare metal exposed can cause arching which in turn can be a potential fire hazard. After researching online I have found that this is not a uncommon problem with GE microwaves. Some have had this issue after 1 year. I contacted GE and told them of the problem and that I felt this was a manufactures defect.GE does not feel that this is a defect problem but advised me not to use the microwave any longer. Their solution was to discard this microwave and purchase a new one. I paid almost $300.00 for the original one plus $20.00 for a mounting kit. I was told that GE would offer me a discount on a new one from $339.93 to $319.93 total. This is not much of a offer considering this should be a obvious manufacturers defect. By ordering another I will have the same problem again. GE needs to stand by their products and admit fault.

The GE microwave installed in my new home caught fire on its own. It is less than 3 years old. GE Consumer Relations Department refuses to replace it for free even when it caused a fire accident on its own. GE microwave failed in its safety standards. GE also has failed in its Consumer Relations. I will not trust GE brand again.

Weve had our new over the stove microwave (GE Profile Microwave Oven PVM2170SR1SS) just over one year and the oven light went out. The owners manual has no information about how to replace the light. I called GE customer assistance office and they said it requires a technician to come to the house to replace the bulb. A service call would cost around $95 minimum. This is a ridiculous requirement to make consumers do a service call for an oven light. The owners manual does show how to replace the charcoal air filter, if you use one, by removing the plastic cover across the top of the oven with the door open. Guess what? I removed the two screws holding the plastic cover and sure enough, there was also the access to the cover to access the oven light. You just remove the one screw and the small cover plate can be removed! Be sure to turn off the power to the oven before removing the small 50w Halogen G8 light bulb (Home Depot $5.00). My complaint about GE is that they do not give the homeowner information about replacing this oven light, but instead require you to pay for a service call. The irony is that the owners manual tells you how to access the filter by removing the plastic grill and thats how you also access the panel to replace the oven light bulb. They also tell you how to replace the light bulb that provides light to your range, so it cant be a safety issue about replacing light bulbs. Requiring the consumer to request a service call for $95 just to replace the oven light, when GE could have easily put the procedure in the owners manual, is a real consumer ripoff!

We just had a Fire in our GE Microwave, Model # JVM1750SP1SS. Manufactured in August 2010. Purchased at Home Depot in December 2010 and installed January 2011. The right rear shelf hook caught fire while the microwave was in use. Luckily, we saw it in time... We are not sure who to complain to or tell about this. We went on GE.com to inform them of this issue and am waiting for a response. I see here that I am not alone. There is other info being shared on YouTube about this issue as well. GE better make good on this for me. Now I have to find my paperwork... Figure out who will remove this under cabinet installed oven and replace it. I am probably on my own here as it is 3 years old!!

Looks great after 7 years, still works good. Could use larger drawers and the soap dispenser hasnt opened a few times. After 5 years of use weve had to rerun the to clean the dishes.

We bought a suite of Slate GE appliances during kitchen remodel 2 years ago. Weve had the dishwasher, model GDT580SMF2ES, motor replaced twice now and it is still loud and stops intermittently. Thank goodness we have the extended warranty! The over stove microwave is now starting to run when we just shut the door and stops intermittently. Were ready to replace everything with a reliable brand and cut our losses. We will never buy GE again.

Bought a new GE dishwasher. Arm on top keeps falling off. Does not heat dry. Dishes do not come out clean. Had repair man out four times, still not fixed. GE junk, junk. Will never buy GE again.

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

We bought a GE dishwasher July of last year. In December it started to shut off some off minutes into the cycle. FOUR months this piece of junk has not been working. Three times someone has been here to say oh it should be working. They are sending someone out for a 4th time now. Should have already been replaced.

I had a GE microwave that matched the GE range that was already in my condo when I moved in. When the range died, I got a new, matching microwave too. I like the way it works, the controls are intuitive and its easy to clean. No complaints.

GE Profile Advantium 120 when cooking on stove under microwave, the fan in the microwave goes on and does not go off for 30 minutes. This happens with only one burner on and stove not microwave set at 320. Had service out told there was nothing he could do. Called GE and again told that there was nothing they could do.

I purchased the unit just over a year ago and it started beeping one night with error scroll speed and then key pad shorted. In the end to repair costs more than to replace, even though it is above stove mounted unit. Do not buy a GE Microwave. Especially model # JVM6172DF1WW.

Have had dishwasher for 3 years and it quit working. Had appliance repair people out 3 times and they replaced every circuit board and harness in dishwasher as per GE and still doesnt work. GE own techncians dont even know how to fix it. So I am replacing it! No more GE appliances for me!

I owned this microwave for the last 5 years. Easy to installed, good appearance, stainless steel, easy to operate but fancy enough to prepare different meals to include the younger ones. Lighting very good and vent excellent.

Very easy to load. Controls are easy to read. Very quiet operating and does an excellent job cleaning utensils and all pot and pans. Have used for 8 years with no issues.

Its a over the range model & came with a house purchase. It’s worked flawlessly for over 5 years now - even after being left with no air conditioning in FL for months on end. The only thing I could think to make it better is making it easier to choose longer length cook times. Button for half min & dial for all the rest can be irritating for your 16 min food.

Had microwave since I moved in in 2007 and it has been great. Looks just like new and works the same. A very great product that Id buy again. Has enough features and options for most people. Includes beverage, coffee and other buttons.

My GE Profile Dishwasher was serviced 2 years ago for a faulty electronic control pad. It made starting the dishwasher a complete gamble, you never knew when it would actually turn on. I paid a couple hundred dollars to fix this problem 2 years ago and of course it has stopped working once again. So frustrating! GE decides to replace one bad part for another bad part. I then asked for the service call to be covered since it was obviously the same problem but they refused. So, GE am I to keep paying $89 for service fees so that you can keep replacing one faulty part for another? STAND BY YOUR PRODUCT!

Good dishwasher for the price. Racks are well designed except utensil basket takes up lot of room. Given forks and knife rack at top, basket is not needed. Dishwasher flies at night.

I moved into a house with the dishwasher already installed and it didnt work. We closed it so we didnt use electricity but it started and wouldnt stop. The power button is broken. It just sits there and the lights are always lit. I tried calling for help but the workers were very unhelpful. I called a different number and was waiting a whole five minutes and no one picked up!

I called to see if someone can help me figure out why my built in microwave is running but no heat. Apparently the customer service keeps insisting I need to schedule a service without offering any kind of help. Why do I have to pay for a service trip when I can fix it with the right part? Unlike other appliance they always have customer service helping to see and figure out what might be wrong to the appliance.