We purchased this new 8 years ago however the problems started after about two and a half years of use. I called GE when the paint started peeling off of the door of the microwave. They asked me if I cooked salty foods. I cook bacon in the microwave. They told me my only option was to buy a new door and have it installed. It was $250 at the time. I did not have the money or desire to fool with it. I continued to use the microwave and it has continued to degrade. Now eight years later there is so much metal showing that we decided we must do something. It is unsightly and very difficult to clean because its rusting. Ive been expecting electrical arcs to occur and the microwave to catch on fire. It hasnt done that. It has continued to cook the food. The entire metal area on the door is without paint. There are other large areas of metal and rust inside on the bottom of the microwave. The entire vent panel is without paint and rusted. We also had to have the control panel replaced twice. It was covered once under the warranty and once it was not. We also had to replace the element in the oven which is used rarely. To replace the microwave and oven combination now would be $3,500. When I do replace it I will replace it with a different brand.

Our GE microwave is 20 years old and still works great! Still looks pretty good too!! We do have a small crack and the start button is worn, however, we use it several times daily. Would definitely buy this brand again.

New home community - all GE appliances. Model PEB7226SF2SS microwave scorching and catching on fire; GE doesnt stand behind their products and homeowners cant use because products our dangerous (per tech).

I was sitting on my couch and I heard something running. I walked into the kitchen and saw my GE Profile microwave was running. At first I doubted myself and thought maybe I did something and then I cleared it out and went and sat back down. It did it again and again several more time. This is very scary. It was running like someone had set it and it was getting hot inside. Im not sure what else to do. The last time I had the same type of problem and just bought a replacement microwave and now this one is doing the same.

Generally ok, but the entire wash cycles take way too long. Certainly much longer than the older models. I guess thats more or less the case with most dishwashers today. It makes me hesitant to use the dishwasher when I consider all the energy it takes to function. I would prefer having a setting for speedier rinse/wash of just a few dishes.

Purchased new GE dishwasher after previous model lasted over 11 years. Family eats most meals and home and typically runs washer at least 4 times per week. New model was upgrade with stainless steel interior and all the efficiency upgrades from technology advances. Ran great for first 18 months then suddenly we opened one morning and notices water standing in bottom of machine. Emptied dishes, re-ran with same result. Technician called and spent an hour diagnosing to determine water pump, control board and wash motor would all need to be replaced at a cost of nearly $600 or 75% of what we paid for the unit new less than 2 years ago. Simply unacceptable that GE would produce such an unreliable product. We will be replacing with a different brand and would tell anyone to avoid GE dishwashers.

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

We have had GE come out to our house 8 times and even our same repairman admits this product is a lemon, but he is not allowed to say it to get us a new one. The company wont let him! Our dishwasher never has cleaned dishes properly and it has leaked over 10 times! It floods our kitchen, hallway, and basement. We had to rip the carpet off our stairs and now the water is ruining the drywall! We just video recorded it leaking and running under our refrigerator, down the basement stairs, and soaking our storage! We are currently calling our lawyer to get something done about this! GE never stands by their appliances!

We purchased a GE microwave/convection oven which developed peeling on the inside top of the microwave. GE contacted me and offered a replacement ($300 toward a shelf model or prorate the microwave/oven). Why would we take $300 replacement when we paid nearly $3000 for this oven???? So we took the prorated one directly from GE. We felt confident that we would not have a repeat of the problem. The oven was manufactured in December 2012. After it was delivered, I noticed a rough area on the turntable; and after the oven began to peel AGAIN on the second oven, I believe that the rough area was due to a remanufactured part on the oven.Now we are stuck with another microwave/convection oven combo with the same issues as the first oven. I never used anything harsh to clean the oven and now this happens again. Why cannot this company manufacture an oven that will not have defects in it??? I am tired of peeling paint on a second oven when I have done nothing except pay them for 2 ovens. Why cannot they use stainless steel interiors, and this would stop the many complaints that people make about the product. I would NEVER again purchase another product from this company. The products I have purchased have been inferior. I paid for two microwave/convection ovens and still have one that is inferior!!!!

We purchased our microwave several years ago. It runs great and still looks great too. It was very reasonably priced which made it a great value. It has all the bells and whistles you would expect on a more expensive model.

We usually turn on the dishwasher in the night. Last month ours started smelling smoke in the morning 6:00 am. When checked, it was the dishwasher that melted couple of plastic cans and its own sprayer and other plastic parts (pictures speaks for itself). When checked with GE, this model was not under recall (there are other models with similar issues). They sent their technician, who confirmed that newer models has auto turnoff circuit. When I asked GE rep, both (level 1 and her manager) assured me that even though it shows its burnt from inside, it would have contained the fire inside, which I disagree. Even after seeing pics, their tech review and the whole incident, their engineers determined this is not a safety hazard to me or my family.

I am writing this more as an educational notice for consumers of the G.E./Rheem gas water heaters to aid in uninterrupted service and understanding of the water heater. Installation locations: If you have installed your unit outside, all though in the owner’s manual, it states that G.E./Rheem says to never install the unit outside. People that live in warm climates do have their unit installed as such, but in a metal enclosure, of which to the city codes are fine, but again not by the G.E./Rheem standards. So being as this is accepted by city codes, people do and will continue to install water heater outside in enclosures.

I purchased a newly built home which had all GE appliances in the kitchen. After 2 years and 5 months, the microwave no longer heats the food. I had a 3rd party appliance repairman come to do a diagnostic evaluation. He informed me that the magnetron has gone bad. To have this repaired would be the same price as purchasing a new microwave. He also informed me that the magnetron should never go bad in such a short amount of time. I contact GE and my warranty was for 2 year so the best they can offer is a $75 good will certificate. What this means is I have to purchase a new microwave and send in proof of purchase and in 4-8 week, GE will send me a $75 rebate check.I am disappointed in the GE product. Their products are now made in Asia (my microwave says made in Malaysia) for cheap labor and the quality has gone down. What is worse is that they do not stand by their product. The fact that something as serious as the magnetron went out in less than 3 years is a red flag that it was not assembled correctly. The microwave is listed at over $500. I would have been happy with GE even paying half but $75 will not even cover the cost for shipping and installation. I am very disappointed.

We bought this GE Dishwasher through JC Penney with a 3 yr extended warranty in Dec 2017 thank goodness. I am on my 3 round of having the mother board and the heater replaced since I got this machine. This last tech came as a 2nd opinion for my claim that this machine has not worked more than it works. All we would do is load the machine, go to turn it on and out it goes. The warranty people sent out a GE Tech who ordered a new board and fuser kit and came to put it in. Same issue, he said it was my hard wiring and I should have a electrician look at it. 200.00 later not the hard wiring. It is a pin hole in the heater coil that this last tech found. New heater now on order. My faith that this will fix the problem is waning. After this my warranty will be up and I will Never buy a GE appliance again. Not worth the money.

I have a newer (one-year-old) but base model GE microwave. I wasnt interested in lots of features, like convection cooking and such. I only use it to reheat coffee, occasionally heat a frozen meal, etc. It functions as designed, and Im very happy with it.

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

Dishwasher is very loud. Even on the longest setting, it doesnt get the dishes clean. The rack system, both top and bottom, isnt set up to handle a lot of items. Very poor quality and design.

I cant remember the exact date of purchase for my GE Spacemaker microwave oven. I have a receipt somewhere, but I have receipts for repair dated 2002. It is for a door seal gasket for the microwave. A model JVM60 GE Spacemaker installed over the range.The microwave worked perfectly for several years. Then one day, when I pressed the start button, I noticed a small fire inside the window above the control panel where the time is displayed. I called repair man; I was told that it was the circuit board, and GE was not able to send repair spare part. Since then the microwave is only good for displaying the time, and storing my everyday pan. I do remember paying $400.00 for this microwave because I purchased it at my employment. It would seem to me a company making a $400.00 appliance would be backed by a circuit board, which they know would go bad in a short time. Thats why they only had a one year warranty guarantee.To show you the difference in a microwave appliance, I purchased a small counter top microwave in 1997; it still works like a charm, and I use it every day. From the negative reviews I read on these Spacemaker microwaves, I firmly believe there should be some compensation to us consumers for the money spent, plus the hazards we experienced. If that is not agreed, then all of us consumers should file a class action suit against GE.

My GE dishwasher has clean all my dishes. Not leaving a run or mist on no dish. I can set the time on when I want my dishes washed. The programming is out of this world! The cost is a great easy and inexpensive cost. My wife was very happy with the purchase. The buttons are not too big. Its very digital timing.

I purchased a GE Spacemaker Microwave model JVM 1750SP1SS from Best Buy in October of 2011. Just a few months after having the microwave, the handle came off. I called GE and they sent a technician and fixed it but it left scratches on the stainless steel. In addition, we have had problems with the turntable. Finally on March of 2013, the keypad went out. This of course is past the one-year warranty. I called GE and they told me that they could schedule a service call for $89.95 plus parts and labor. I told them that I could buy another microwave from another company for less than that would probably cost. This microwave was made in Malaysia. I would not recommend any GE appliances that are not made in the US.

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

I love my GE dishwasher with sanitizing. It works great at cleaning, drying and sanitizing my dishes and it’s really quiet. I love the stainless steel. I forget it’s on at times because it’s so quiet. Happy with it.

I purchased a GE Profile dishwasher in June 2015. It was delivered dented.19 July it was replaced. The dishwasher worked for 3 months. Then it stopped working and the display panel had a LEAK DETECTED, DO NOT USE, notification. We contacted GE who could not find a GE repair technician to come and repair it in the entire BAY AREA. The dishwasher was bought at SEARS who refuses to take any responsibility.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

I called the toll free number because of the concern I am having with your microwave, the paint is coming off the inside. So my concern is first why would it be coming off, is it a defect in the product or does it just happen? The person was helpful and seemed as if it was to be concerning. WELL IT IS to me. Could it make us sick, do I need to put it in the trash or what? Thanks for not helping me and not being concerned, but I am sure if it was you or family you would have had a different story to tell.

We bought a new house with GE microwave, oven and dishwasher. Our fridge doesnt give any water anymore and our touch screen microwave stopped responding to any touch. When I called customer service to come see, they want to charge $80 just to tell you whats the problem. GE has the worst appliances. I will not recommend it. I will go with Whirlpool brand.

Today I heated some spaghetti sauce in my microwave and it splashed, so I wiped it out. My microwave is built in and was pretty new and in the house when we bought it 4 years ago. It is in the base counter so I have to reach down to clean it. l havent had a problem with it but when I wiped the inside top I felt bumps and when I looked at the cloth to see what was on it, there was paint on it. That has never happened before so I of course looked and there is a fair amount of peeling paint in one spot. I have had microwave ovens for many years. Never had this problem with any other brand. What is that?? Can it be fixed? Is it dangerous???

Three nights ago, I loaded my GE Profile Dishwasher, model # PDW9880L00SS and began the wash cycle. The wash cycle completed and I went off to bed leaving it on the dry cycle. The next morning I smelled a burning smell but did not know where it was coming from in my home. A few hours later, my husband began searching all of the appliances in our home to see what the burning smell was. When he opened the dishwasher smoke came out of it and everything in it was completely burned. Apparently the drying mechanism never turned off after the wash cycle or it turned itself back on only on the dry cycle. I dont know. But I know one thing for sure, we are lucky that my husband was home because I left and if he wasnt there, Im positive that the dishwasher would have caught on fire causing severe damage to our home. I will never purchase a GE appliance again. Note, I also have problems with my GE refrigerator and my GE Profile microwave and our dryer. Weve had to replace the dryer and the microwave and weve repaired the refrigerator. I have a repair person coming out to see if the dishwasher is repairable, but I dont think it will be. This is terrible.

In 2008 I redid the entire kitchen and purchased all GE Profile stainless steel appliances thinking I was purchasing quality items. Well, it didnt take long before the dishwasher broke but it was fixed for free by GE under a recall. However, now the refrigerator has begun to leak under the right corner of the ice/water dispenser located on exterior of freezer door and the microwave touchpad has also failed as I need to press below the actual keys for it to work half the time. When I spoke with GE customer service they basically told me there was nothing they could do with the refrigerator, I would have to call a repairman and have it looked at or pay their $100 diagnosis fee.The microwave they told me had issues with that particular touchpad and had it broken within first 5 years they would have repaired it for free under their recall program. But since its 7 1/2 years old I would have to buy the touchpad which normally only lasts for 6 months to 1 year or buy a new GE microwave and they would offer a rebate. Im so unhappy with their customer service and poor reliability of their products that Ive passed on each offer as I dont want to contribute another penny to a company that in my opinion is unethical and has horrible reliability. 3 out of 4 of my fancy GE Profile stainless appliances have broken! Thats a 75% failure rate! No thanks, Ill buy elsewhere. No wonder they cant sell their appliance business and why the stock hasnt moved in years... Wake Up GE, do whats right for your customers!

GE Triton XL dishwasher overheated for no reason and melted the inside components to the point they are scorched black. This dishwasher is worthless. There would have been a possible home fire if we were not at home at the time of incident.

Of course, I rinse my dishes, but Ive had few incidences of dishes coming out dirty. Hot start, start (long wash), short wash, rinse only and plate warmer. The interior is set up well with a good variety of spaces. I would say its a normal-sized household dishwasher, not compact, with approximately a 24 width, 24 depth and height. White with gray lettering; four buttons and one dial. Simple design that is easy to understand and operate. The run-time of this dishwasher is quite long, and it is very loud.

I wasted my whole day waiting for GE Technician to come. Nobody called me to let me know that they are not coming. I have to call them only for a Mr. ** to tell me that they had rescheduled the appointment for another one week without notifying me. Good job that GE APPLIANCES are doing. You remember the so called TOO BIG TO FAIL? It means, they can do whatever they want at whatever time or day they want. I dont have a vent in my house and that means I cant use the stove. Is this ridiculous or I am missing something here? Is it TOO BIG TO FAIL? Yes, I forgot that. I will be staying in a house with a new GE APPLIANCE that has not been working for the last one week and have to wait for another week. Mind you, this Appliance has been used only for barely a month. Is there anybody out there who is facing the same problem or its just me. If there is nobody going through the same experience, an excuse like there are no Technicians available to come to your place and do the job. If there is anybody out there who has trust in GE appliances like I did or even thinking of getting one. Be aware that you will be through what I am going through and there will be no technician available for another two weeks. Be ready to wait for they will reschedule your appointment without letting you know, why? Because theyre TOO BIG TO FAIL. What will you do? Wait until they decide to come, if theres a technician available. I just realized that GE means GO ELSEWHERE. Thanks GE for the good job.

I purchased a GE microwave, model LVM1750DPWW, in 2012. It was delivered approximately 12/6/2012 and was installed in July 2013 after our kitchen remodel was complete. In March 2014, my daughter was warming something on the rack when the back upper rear hook started sparking and caught fire. I am thankful the only damage was to the microwave and to the smell in the house for a few days. When I called Lowes and GE, they act like theyve never heard of this issue. Yet, I see many other complaints of the hooks catching fire. Just to be sure, I turned on the microwave again. The hook started sparking immediately. GE sent a repairman to the house who told me that GE ought to let people know not to leave the racks in the oven. Since she was cooking on the rack, it would be difficult not to have the rack in the oven. He said the oven was a safety concern, could not be repaired and that GE would bring out a new microwave and install it for me. Great! I was pleased - yet concerned. A couple days later, I received an email from GE customer service saying that we had put the rack in the oven incorrectly. There is NO way to have put it in incorrectly. Besides that, he couldnt have seen if this was true since the hook was burnt and melted. I am pretty angry.

While heating a bowl of butter, my microwave arced. Microwave had smoke and electric fire smell. I have contacted GE. They said it was a rare issue. From the reviews on this site, I do not believe that this is a rare issue. They offered a 25 dollar coupon to buy another one. I do not believe I would do that. GE has had microwave recalls in the past due to fire hazard. I have registered a concern with the Consumer Products Safety Commission.

We have never had a problem with the microwave. Most of our use has been heating things up. There has been a few times that our granddaughter made something else. It is lightweight. Easy to clean. Not too large or small. Fits what we use it for perfectly. Doesnt take up much room. It heats perfectly. It has been a really good microwave.

Looks great after 7 years, still works good. Could use larger drawers and the soap dispenser hasnt opened a few times. After 5 years of use weve had to rerun the to clean the dishes.

Our dishwasher has gotten very warm mid-cycle and now trips the breaker in the house each time we run the cycle. The problem became evident in April 2012. We have called in a GE repair person to fix it and they said it was a heating issue and not repairable. We have not used it since, but have not replaced it with a new one yet. In August, we read about the recall of a similar model number manufactured within same time frame. Our machine model is PDW7300J03WW, the recalled model is PDW7. Our machines serial # is **. Strangely, the serial number is not listed in the recall, even though symptoms are exactly the same!We have called GE Consumer Affairs at 1-800-386-1215 four times, the most recent today, 9/14/2012. Each time we call, we are left on hold for 59 minutes only to be disconnected automatically! I am sending a registered letter to GE CA with a copy of this link and intend to contact my local news if I do not receive sufficient response within the week. Does GE need to see an actual fire report from my fire department or worse in order to get their attention to replace the unit? It is disgraceful and extremely dangerous.

Worst experience ever. Bought the dishwasher in Jan 2014. The washer does not wash. Three different technicians have passed by, cant fix the machine. Awful customer service, routine answers, file not assigned, cant talk to a manager.

This microwave is nearly 20 yrs old and is still working great. We replaced the handle but other than that it has been great. I would definitely recommend the GE brand as it has been very reliable. I give this product a great rating.

The GE microwave we use is almost 17 years old and has never needed any repairs. It is everything you could want from a microwave.

I have had my GE microwave for over 6 years and the paint is flaking off the inside of the microwave, causing a health and fire hazard. Paint chips in the food and bare metal exposed can cause arching which in turn can be a potential fire hazard. After researching online I have found that this is not a uncommon problem with GE microwaves. Some have had this issue after 1 year. I contacted GE and told them of the problem and that I felt this was a manufactures defect.GE does not feel that this is a defect problem but advised me not to use the microwave any longer. Their solution was to discard this microwave and purchase a new one. I paid almost $300.00 for the original one plus $20.00 for a mounting kit. I was told that GE would offer me a discount on a new one from $339.93 to $319.93 total. This is not much of a offer considering this should be a obvious manufacturers defect. By ordering another I will have the same problem again. GE needs to stand by their products and admit fault.

I purchased this GE dishwasher May 2015 through Amazon. Immediately after installation I was having trouble where it kept beeping when I went to wash dishes. A repairman came out and said there was a recall on the control panel and he replaced - no charge. In July 2017 this dishwasher flooded onto my laminate floor. I found it in the morning when I woke up. An appliance repairman came out. Did not know why it flooded. No charge this time, but he made a few adjustments and it seemed fine. Then the bottom sprayer arm broke. The heat shields fell off and the arm melted. I had that replaced.Then the washer would not dry - no matter what I did. Repairman came out. He did not have access to the GE computer program but made some suggestions. No charge. Dishwasher seemed to dry better for two weeks. Then in August it flooded again. A repairman came out. Ran the dishwasher, but it did not flood, so he did not know what the problem was. This time charged me $60 and said call if it floods again. Obviously I am afraid to run the dishwasher at night or when I am away in case it floods again. Plus the dishwasher is not drying completely.I have contacted GE. Their response is: Normally we dont do this because your warranty has expired already; however, I have a bit of a soft spot and think some extra consideration is due. I did a lot of research and came up with a couple options to help you out: I realize this is not ideal but we can extend to you our discount into any new model if you find its not cost effective to repair. I found the 2017 comparable model for you. Really??? I dont want another GE. I want a refund as this is a piece of junk. Plus this kind person said it would only cost me $484 and I will have another warranty.

GE factory services uses rude, discriminatory, evasive, procrastinating and unethical business practices to limit customers from claiming warranty. We have a non functioning dishwasher which is under warranty. This came as part of the appliance package given to us by the builder (Hallmark Homes) when we bought the house in December 2017. When we contacted GE customer service to let them know that the dishwasher wont work, they gave us a date after 2 weeks for sending their service professional. After 2 weeks, their service professional came in and behaved in an extremely rude and racist manner shouting at the top of his voice for the inconvenience caused to him for coming to repair the appliance. After connecting his computer to the appliance, he said it was fixed and left without even checking if the appliance was working correctly. Even after repeated requests to check the functioning of the device before leaving, he threatened to be physically violent if we still pestered him to stay. After he left, we realized that the dishwasher wasnt fixed when we ran a wash cycle. We again contacted the customer service to let them know that the issue isnt fixed and requested them to expedite things to get it fixed. They said that we will get the next date for a service appointment again after two weeks and there is nothing they could do. After living the nightmare of washing dishes for more than a month, the same service professional came in again and repeating his similar rude, racist, unethical and threatening behavior left without fixing the issue. He said that GE appliance is not owned by GE anymore and hence nobody cared about what happens to the customers. He again passed the buck to the customer service and said I needed to take up this issue with them. In this whole back and fort, we are left devastated without having our dishwasher and living the nightmare for more than a month.

We purchased a new General Electric (GE) Adora microwave model DVM1850SM4SS from Home Depot for approximately $355.00 in 2010. It was manufactured in Malaysia and had been in use for 2 years and 9 months before the magnetron failed. I spoke with a GE Customer Care representative on two occasions, and she said that the best that GE could do was split the cost of parts and labor since the 1 year warranty had expired. We had not purchased the extended warranty believing at the time that a microwave generally lasts for many years, and GE had always made quality products and would stand behind them. I indicated that I wanted to have the problem properly diagnosed by the service rep recommended by GE before proceeding further. The 10-minute service call bill set us back approx. $100.00. It would cost at least another $170 to replace the magnetron if we used the service tech contracted by GE. For $270, I believe we could find a fairly nice new microwave. I looked at alternative options for repair or replacement, since I am rather partial to the looks of the over the range stainless steel Adora. The model we have is no longer manufactured, but GE now offers the 1.9 cu. ft. Adora that Home Depot sells for around $400.00. In my internet research, I noted several postings that indicated that due to the high voltage danger of the magnetron, only trained technicians should attempt repairs. After half a dozen calls, I fortunately learned of a Microwave Service Center close to our residence that could replace the magnetron. After taking it down from above the range, hauling it in for repair and paying the approx. $104.00 bill and hauling it back to our residence to mount on the wall, we have a microwave that should work for a while! Total cost including service call for diagnosis - $204.00. Considering that GE does not wish to stand behind the quality of their products, I would not be likely to purchase a GE product again.

I purchased a GE dishwasher model no. GLD6700N00CC, serial no. ** about 4 years ago. It just finished the wash, rinse and drying cycle when without warning, the front panel on the dishwasher started smoking and spewing fumes in my kitchen. The front door of the dishwasher and top of my counter were extremely hot. Luckily, I was home when it happened. Otherwise, I might have come home to a fire.

Purchased new home and bought GE Monogram package. Within 6 months dishwasher started leaking bottom of door. After five repair service calls. (Thats 10 times waiting for service man or for parts to be stalled). The final repair killed the dishwasher dead and GE replaced it with a new Monogram dishwasher. I thought all was working fine but then this new dishwasher developed a leak underneath and the sensor shut it down completely. Service call made to GE and a GE service man came, only he couldnt get to the leak area because he couldnt pull the dishwasher out because the connecting water hose was being stretched so tight he said he couldnt disconnect it because he couldnt see behind the unit or the drawers to see where it was hung up. Plus he is not authorized to install or reinstall dishwashers. So I call GE repair and now have spoken to the most uncaring, dis concerned case manager handling my account. He tells me that this now a installation problem and that even though GE delivered the dishwasher and installed it that because these were outside venders they (GE) were not responsible for the installation and dont know if they used GE standards to install it. So because the GE service man couldnt move the dishwasher I now needed to get a plumber to disconnect the dishwasher, find out what the problem is with the installation, coordinate a service call date with GE service to then come out and put in the parts, then have a plumber back in to install the dishwasher again. GE will reimburse me up to $125 for the plumbers work and I have to submit the plumbers invoice. No guarantee that a leak will happen again, because the GE service man cant even run a test on the replacement parts because the dishwasher isnt hooked up to water and he cant do that because he isnt authorized by GE to install. Oh, the dishwashers warranty ended on 10/10/2015. My service call went in three days before it was to expire so service is covered for the leak (or so I have been told). But what will breakdown next with this appliance? I bought GEs top of the line package. I bought a MADE IN USA appliance and I can honestly say that this GE appliance turned out to be unreliable, unrepairable and their case managers uncaring. I will never ever, ever buy another GE appliance. I will never recommend any GE appliances to anyone ever. My KitchenAid lasted for 26 years without a service call. When I remodeled my kitchen I purchased a Bosch dishwasher. That pleasure was 13 years old when we sold our home. We have been in this new home for 1-1/2 years and now on my second dishwasher with a future of many service calls ahead and very bad taste for GE. If this leak problem is not fixed or another problem arises, I will yank this dishwasher out and buy another brand. A reliable one and definitely not a General Electric EVER! Since this GE Monogram package was purchased at P.C. Richards they will also be notified of my displeasure and I will continue my discourse of GE forever for their lack of product truthfulness and quality, plus consumer disregard.

We wrote to GE regarding the issue with the dishwasher and, after some phone tag, a certified GE engineer came to the house, diagnosed the problem and ordered all the replacement parts. This morning, they came by to install and essentially rebuild the entire system with the exception of the stainless steel. Overall, we are very happy with the outcome. With all the negative issues GE experiences online with regard to the Cafe Series, I give them a solid 8 for responsiveness and taking care of the situation. Perhaps ours is a rarity, but if you approach them logically and with facts, they seem willing to work with the consumer. Heres hoping the system cleans better now too!

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

We were super excited to get this GE Profile Cafe dishwasher. Minus the brand, it was the exact design/style as the one my dad has which we love! First issue, dont have a name of a dish liquid if you cant use all of them. Cascade apparently makes different detergent styles for the smart dispense. Dishes were ridiculously dirty and the horrible thing is I couldnt find an answer why on GEs site, I had to go to a handyman site. That was about a month and a half ago. Today, I did the dishes and, of course, let it do its thing. I always have the heated dry on by the way. Well, dinner came and I grabbed some dishes out which were screaming hot and I had to use an oven mitt. I didnt think anything of it because sometimes Im a sissy about that. Well, its now 3 hrs later and I get up to the smell of burning plastic. My first thought was that the sippy cup straw fell on the heating unit. I did not, however, expect to open it and see the Tupperware melting, the silverware rack melting and the water bar to be melting to the heating unit and it being so hot that I have to use an oven mitt just to touch the freaking rack. Oh! And by the way, we bought this off Craigslist last year and it was brand new. It still had the casing around it from the store.

I purchased a GE microwave just a year ago. Ive had a few problems with it like the round glass plate that you cook food on cracking in half twice when the microwave wasnt even in use, and the control panel going stupid... requiring me to unplug it to get it back on track. The worst part is I purchased an entire kitchen work of GE appliances at the same time and Ive already had two service visits on the dishwasher.GE customer service is the worst! When I call they just keep repeating themselves and they never listen to what Im telling them. Today was the worst yet... I got this woman on the phone and she just kept telling me the microwave was not in warranty any longer as of last month. She also told me she only has two appliances listed on my account (no range or refrigerator) when they were registered at the same time as the other appliances and they have sold me filters for the refrigerator several times. All I can tell people is if you are considering buying GE appliances... DONT! They SUCK!

This is the second GE microwave. In 2 years I have had that, the paint peeled off inside the microwave in sheets! I contacted GE the first time and was offered no help or explanation. I was told it was an older model, even though I bought it new. This time, I just chose to throw it away and never purchase another GE appliance again!

Periodically my GE Profile Dishwasher will not clean well. On every occasion it is due to clogging of spray ports on the upper and/or lower spray arms. Removing the blockages is nigh-on impossible as it is often not possible to extract the blockage from the outside and its not at all possible to flush the blockage back down the arm to extract it at the centre. All that is required is a bit of forethought and the creation of some access to the arm. I was frankly surprised to not be able to find a replacement arm as the suggested solution to this problem, the additional part revenue being part of GEs the business model. There are a number of other design issues with the assembly at the bottom that make me think it was done by an intern and nobody checked her work at the end of summer break before it went into production.

We got the GE cafe series appliances with our house. We just completed 16 months in our new house and the microwave stopped working. We had to call the GE cafe person to troubleshoot the problem. He charged us $80 (without even touching the microwave) and said we will have to spend $450 more to fix it. This is such a horrible customer experience. I had a $40 microwave in my old apartment which lasted for 4 years without a single problem. I am definitely not paying $450 for a useless microwave. But now I am worried about remaining appliances I have from GE. I understand that you would say you cant do anything as the appliances are not in warranty anymore. But if you really care about your customers, you should start looking into this and fix it. I am very very disappointed and I am not letting this go. I expect someone from GE to help us to get this fixed. Thanks for your patience to read this outburst of a disappointed customer.

My husband and I purchased a GE dishwasher model: P GDWF150V55ES, serial no: SZ768478B on October 20, 2012. The dishwasher never worked from day one. I have had so many hassles with the consumer relations department. They are the WORST EVER!!! I have been fighting this company for over a year. I have provided photographs of filthy dishes and utensils. They dont care. We are a middle class family and we have been ripped off by GE. I will NEVER purchase another item from GE and I recommend that nobody else does either. This has been a nightmare for us.

We lost our old refrigerator to a lightning strike and had to get a new one ASAP, and it had to be counter depth, a great ice maker, side by side, and not be a SS finish. My wife and I hated our old SS one but liked everything else on the old unit so we went looking for a new one that met these requirements. What a chore, this was not an easy unit to find as most everything now has a bottom type freezer. This was defiantly out of the question.

I purchased this in Feb. 2013. Just before the 1 year warranty was up the control panel went out. They came and replaced it. Now just a little over a year of the replacement, the control panel went out again. Worst microwave hood fan Ive ever had.

I purchased this product in June 2011 for a summer weekend getaway home. I used it 5 times during that summer. The following summer I didnt use it at all. Summer 2013, I used it and everything seemed fine. That night I heard something and the microwave turned on by itself! Thank goodness I was at the house. I cannot believe this unit has not been recalled yet, as I see other consumers are complaining about the same thing. I keep the unit unplugged all the time. What recourse do I have as a consumer? I have my bill of sale and paid good money for this unit.

Bought the new dishwasher in Dec. 2013. In November 2014 a month shy of warranty expire, the detergent dispenser did not release or partially released the detergent. GE sent out A&E Factory service to fix. First visit initiated the parts order which was a new computer board and a Cascade Series detergent dispenser. A month later the second visit to install parts, the A&E tech was at our home for 3 hours and it took that long to remove and replace detergent dispenser. The tech did not replace computer board stating it was not needed? A week later the detergent dispenser still did not release the detergent! Called back to set up another appointment which was at the earliest Jan 19th 2015. Meanwhile last Friday Jan. 9th 2015 the dishwasher started to smoke heavily causing smoke detector to go off at 9 p.m. at night. Thank goodness!! We were home so that I could disconnect the power. Third visit was 1/12/15 and was informed by Lead A&E tech that the board should have been replaced and that the tech that was sent out was a trainee and inexperienced to work on my dishwasher. He should of never worked on my dishwasher(!!) according to the Lead A&E tech. The Lead A&E tech also stated that my model has had a problem with the computer boards which is essentially the brain of the dishwasher. I am currently taking my fight back to GE since A&E Factory is a subcontractor to GE and is not authorized to replace appliances. I told GE that I want a new dishwasher that is not using the problem computer boards even if it is an upgrade. It is not our fault that they have work with A&E who send out inexperienced techs to work on complicated GE appliances. We want a dishwasher that we both feel safe to run while we are not home. Is that too much to ask for?

My Profile dishwasher is not on the recall list, yet the heater element malfunctioned and did damage the entire inside racks and spin bar along with contents. GE told us to have their recommended repairman provide estimate. Repair guy estimated over $600 to fix. The unit was smoking hot which caused bubbling on the exterior and the dishes to show signs of burning. Well with estimate, GE is offering a discounted top of the line dishwasher for over $600. Pretty sure, I do not want another GE. Also, when I told the agent that I was afraid that if I had not been home, it may have initiated a fire, she said it would not have happened. Really?

I bought a brand new house and it came with the set of GE profile appliances in 10/2009. In November of this year, it came on for one minute on its own and then popped and indicated a circuit board failure. The inside of the microwave was extremely hot and there was obviously an electrical short. This could have burned down my house! My fiance replaced the circuit board at a cost of $125. I negotiated from the service department that supplied all my builders appliances. This week it happened again. This time, there was a cup of coffee in the microwave and it boiled in the minute before the microwave fried itself! I cant believe that GE still has this product on the market! Any product on the market! I have to replace this because I cant sleep thinking its going to catch my house on fire. Are there no ethics anywhere?

My GE Profile dishwasher is now 4 years old and Ive put up with it not cleaning well. For the last 3 years, I get a cloudy gray film over the dishes and finally figured out what is happening!! There is a gray rubber/plastic border around the bottom screen piece that has all the holes in it and covers most of the bottom of the dishwasher. I gently scraped with my finger and lo and behold its like gray putty!! So, the whole border of this gray rubber/plastic is disintegrating!! I had a 4 year warranty from Sears and they sent out a repairman. He is just going to order that whole screen part and replace it. He scraped the rubber and it came off for him too!! He said he never saw that before. He said it is probably the fault of my detergent which comes from health food stores and NOT the Cascade that they promote. Anyway, now I know where the gray film is coming from... Weve probably been consuming this for 4 years, a little at a time (NOT GOOD)!!! Im not thrilled with Cascade either!! Probably my LAST GE product to buy!!

I replaced a GE JEM25 microwave when the Magnetron gave up with a PEM31DWW unit. Within 14 months the paint on the ceiling of the oven started flaking off. Contacted GE and they offered to sell me another oven for $166. After reading all the negative reviews on this site, I dont think I will ever buy another GE product.

First, as a new homeowner blessed with select builder-provided appliances, I never imagined I would be authoring this letter 4 months after closing on the new home. Your friggin’ microwave oven light mechanism truly sucks! I lost the two bulbs a week or so ago and purchased two more at the cost of approximately $10, even though a one-year warranty was stated. That was okay, as I was more interested in fixing the problem versus starting some long-range purchase interest. So, and this is the most aggravating aspect, I have the correct pins and life is ** good, and as I attempt to insert the first, the ** pin breaks off. Okay, so I reflect on the horrific engineering of the mechanism, and I softly” align the second of the two bulbs, and the ** pin breaks off again. ** is my predominant theme tonight. As well, believe me, I am going to inform Taylor-Morrison that their respective selection of your friggin’ lousy pieces of crap is corrupt and misguided. You suck, G.E.! I’m moving forward.

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

We had a GE dishwasher installed by the builder when the house we live in was built and it was one of the ones which were recalled as a fire hazard. We didnt really have any issues with it though, other than it was a bit noisy. With the credit offered, we decided to upgrade to a high end Profile model. The sound proofing is impressive and it was actually hard to tell the unit was on, but that is the only thing you can say that is good about the machine. As a dishwasher, it fails miserably and often items come out dirtier than when they went in. OK, weve struggled on with that for some time now but today, a nasty burnt plastic smell brought us both to the kitchen to investigate. Sure enough, the replacement for the fire hazard was the culprit. Obviously, it will need some serious repairs before it is safe to use once more. Looking through this and other sites, it seems this problem is rife and GE is reluctant to deal with the issues. Well I think that will be our last GE appliance. Thank you very much and rather than throw good money after bad, we will put the repair costs towards another machine ABGE.

We moved in to our home in 2006 and it had a GE Monogram Microwave built in. The microwave died and I purchased a similar GE Monogram microwave to match our kitchen in 2014. That microwave died exactly 17 months later. Fortunately, we had a home warranty program as we are selling our home. I figured that this saved me the effort to complain to GE about their product... Wrong. The Home Warranty program sent a repairman who said we can order a part. A few days later I received a call that they would replace the microwave. OK... I checked online as well as with a local retailer to see which model is the replacement model, and trim kit. Today (about 10 days after I first called for service) they delivered the new GE Monogram microwave and installed it. Fortunately, I asked to test it and we tried to boil a cup of water. The contents in the oven being cooked were not visible. Either the light was too dim or the shading on the door was too dark. I have never seen a Microwave where you could not view what is inside. I called GE Customer Service while the installers were there and they refused to allow me to keep it until a replacement was delivered. They had to deinstall it, re-install my old (non working unit) and take the new one back. I called GE with my homeowners claim info and they sent me back to the Homeowner Warranty company to start the claim all over. Ridiculous.Instead of a replacement they offered me a cash value which was 60% of what I paid the retailers. When I asked why that amount? They only provide the value based on what the Warranty company gets the products/services for (wholesale cost). Net: If I used the money to buy another product it would cost me out-of-pocket for replacement. I am hoping the new unit to be delivered in the next 3 days works better. Otherwise, GE has a significant design flaw that doesnt allow you to view what is cooking in the Microwave. If thats the case, why have a window at all? Fyi - My Panasonic Microwave in our basement is working fine.... and has for years.

This review is of a low end dishwasher with simple controls. It has a plastic tub. The racks seem poorly designed. Bowls are hard to fit in. It cleans competently if it has hot water when it starts and a high quality detergent. Its basic and does the job. Pretty quiet too.

Our stainless steel finish 1100 watt JES1142 microwave is around 2 years old. Within the last year the finish inside started to corrode (yes, my wife cleaned it regularly with a non abrasive, appropriate cleanser). Also, the door latch button started sticking and a few days ago it just stopped heating. Unfortunately I cant find my receipt, but I bought it at my local Lowes on Bell Rd. Nashville TN. Serial # is MA212483G. Manufactured July 2013. Was this just a lemon? Very disappointed.

2 year old GE ADORA dishwasher - I am so disturbed tonight after seeing what happened to the protection rubber that is on the exterior of my dishwasher. I decided to buy a new dishwasher because the bottom tray would not stop when pulled out at the correct stopping point. Today I got my new dishwasher installed and when the installers pulled the old one out I was shocked to see that the protectant that I would assume was placed to protect my house was melted all over my wall behind the dishwasher. WOW. Talk about a MAJOR fire hazard. Thank God my house didnt catch on fire because of this faulty equipment. Check out my pictures and you will see the pile of protectant that was under, on my wall, and behind the dishwasher once it was pulled out. Sincerely concerned.

I purchased a GE dishwasher, stove and refrigerator in December 2012. All 3 appliances have broken, needed parts (which were also broken) and I still have appliances that arent working appropriately. The dishwasher door broke and it doesnt clean or dry well. The induction stove (the main burner) doesnt work and the replacement part was delivered to my house and that was delivered broken. The fan in the refrigerator broke and still remains broken. I have had nothing but headaches since the day the appliances were delivered. I would not recommend GE appliances.

Touch panel gets too hot from the stove and fails. Have to unplug it all the time to reset. Door handle unscrewed and inside coating is peeling. Had repaired three times. When least expected, I have to empty the cabinet above to reach the plug.

I purchased a jes1451dn1bb microwave 16 months ago and I just noticed the enamel coating on the top of the unit is chipping. GE has been unhelpful, saying it is outside the warranty and I need to mail the cord and sticker inside it to have a rebate issued. Since I use my microwave daily, I cannot wait until it is processed to buy a new unit. Not only did the product endanger us with exposing our food to paint emissions, the company has been unhelpful. I highly recommend buying another companys product and do your research!

The first GE microwave never worked right out of the box. I took it to school and let my Physics students (I am a science teacher) tear it apart and find the trouble. The magnetron was broken. Since it could possibly have happened bringing it home, I decided to let it go and went and bought a new one. This one is less than a year old and has the very scary habit of coming on by itself. When I go in there, it says it is defrosting, or beverage, or any number of reasons. Tonight, I will unplug it, chunk it, and go buy another microwave. One can bet that I will never buy another GE product.

I guess my GE Profile dishwasher is a lemon. Sounds like it from all the other reviews. Same deal - purchased it in July of 2016 and by October 2016 it went out. Technician that was sent told me it was the electric and I needed to have an electrician fix the fuse. Electrician came out and said it had electric, that it was the dishwasher that failed. Next technician fixed it and said the electronic panels get confused. Three days off of work. December, 2016 the dishwasher failed again. Had no dishwasher throughout the holidays. They scheduled service technician and then cancelled because the one technician they had was out sick.Today, January 9th, they called to let us know they were on the way, but never called the number they were supposed to, so now we are totally taken off the schedule. Ive been on hold and disconnected three times and now have been on hold for one hour and 6 minutes. DONT BUY GE APPLIANCES - Terrible service and crappy appliances that dont work. This is really sickening since I have ALWAYS used GE appliances.

Not very satisfied with the functionality. Turntable does not work or has ever worked. Time features and power adjustments are not very intuitive. I would not recommend this brand, I believe there are other brands out there are much better for the same price range.

This is the second digital microwave I have owned. Both of them have been GE brand. There is nothing fancy about them but they are very Easy to use and get the job done. The first unit lasted about 15 years before it had to be replaced. It was used almost on a daily basis, so I feel I got my money’s worth from the unit!

GE continually shows us why they are failing as a company. In just this last year I have replaced a less than 5 year old GE microwave, three separates parts to my GE monogram refrigerator, and now this one and a half year old dishwasher. The only appliance that GE makes that hasnt broken is the stove/oven that is over 10 years old and shows no signs of weakening.I purchased the upgraded stainless steel model that contained all the bells and whistles. It lasted 1 year and 3 months before the entire control panel stopped working. We utilized the dishwasher about once a week or once every two weeks in a two person household. Hardly a rough environment for a 700$ appliance. The repair costs was quoted for 99$ just to have GE look at it. The control panel was 140$, plus additional labor. This amounts to over 280$ to repair a year old product. I advise buying LG or Bosch.

My 5 years old over the range GE Microwave Oven in my old house had a keypad malfunction. I replaced that oven with a different brand. This time, my 2 years old GE profile microwave in my new house has the same keypad shorted like other users posted. I was hesitating to buy this brand at the time. But the look and match with other appliances, plus the good deal from vendor, I gave it another try. I made a terrible mistake. No more GE appliances for me.

Have to rinse dishes clean before I put them in. Otherwise they will not get clean. Does as well as most other dishwashers- until you get into the very upper end ones. The racks are good size. The outside is nice looking.

I purchased a stainless steel GE dishwasher for $508.68 since I remodeled my kitchen October 2016, I contacted GE in March 2017 because the stainless steel on the dishwasher door started to have rust spots, they sent a technician to look at it, they told me that they cannot replace it because the aesthetic warranty is only good for 30 days. They authorized the technician to replace the door, however I have the same issue with the new door, and also the dishwasher stopped working. I contacted them again. The technician was able to fix the dishwasher, but as far as the stains on the door they told me thats an aesthetic issue. They cant do anything about it. I called the consumer relations department. I spoke with CIARA GE case # **. They offered me a small discount and I have to come up with $400.00 to buy a new dishwasher.I feel that a good business should always stand behind its products. The dishwasher obviously is defective, they sold me an appliance that supposed to be stainless steel but its something else, the right thing for GE to do is to exchange the defective product for the right one. I am very frustrated that in less than a year I have to spend over $900.00 for a dishwasher. I am great customer for GE, I remodeled my kitchen, I purchased a GE refrigerator, cooktop, oven, kitchen hood, microwave and dishwasher, I think I deserve better than a small discount for a defective product.

My experience with GE over range microwave oven (built in) as follows/ Unit Mod.JVM3160RF3SS. Ser.#GG248367A, this unit was produced April 2016. Review February 28, 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. New home with dedicated circuit = Yes. Online Problem shows indoor sensors interlocks not adjusted properly. Troubleshoot fee minimum $99 with parts estimate $250.00. We have been limping along for two months with frequent trips to basement resetting breaker, now the breaker trips when activated. Same thing happens on multiple circuits, via extension cord trial. Next step purchase NEW MICROWAVE that is not GE.

We bought a model PVM9215SK3SS microwave as part of an over-the-range microwave oven/extractor fan combo. Unlike every other microwave combo weve ever had in our frequent moves, this microwave cannot run the kitchen timer independently of the microwave. If you try to set the kitchen timer when the microwave is running, the cook-time changes and overcooks whats in the microwave. If you try to set the microwave to cook while the timer is timing a food cooking on the range, it simply refuses to work. The instructions are very hard to both find and then understand, having been written in China to cover many different models. Apparently I can ask my phone to turn it on. I sure cant manage that very often in person! The fan is too loud for comfortable use even at the lowest speed, which is a great disappointment. A former Profile model was very quiet at every speed, and much more efficient. Were saving up for something that works.

The GE microwave model CJES1290Ml01 does not get used much, maybe 15 minutes per week. I have not even used convection oven or broiler part, so we could say very gently used. Sparks and grinding noise out of the magnetron tube area started recently and there is no metal in the microwave. It arcs like there is metal. There are not enough miles on this equipment to need replacement, but it is too expensive to fix. Im not happy with Walmart GE product. Did they cheap it up?

Purchased the Maytag MDB7749SBM stainless steel dishwasher in December 2013. The dishwasher and install totaled $700, which for that price and with Maytags past reputation, I wrongly assumed that the dishwasher would last a long time. In May 2016, slightly over 2 years, the dishwasher started having issues with the control panel. The control lock would randomly activate. I would have to reset the circuit breaker daily, leaving it off for around 10 minutes. Even with trying to go through all the steps to resolve the issue, resetting it from the circuit breaker, sequence on the control panel, the dishwasher wouldnt work. I called Maytag and after 40 minutes on hold, they finally answered. They wanted $89 for a service call and for the $143 part, plus labor. Might as well just replace it with another brand like GE, or Samsung.

PDT845SMJES - I purchased the entire GE Profile series when we remodeled our kitchen in October 2016. The first time I started the dishwasher, it leaked out the bottom of the door. The store where I purchased it sent out a plumber who discovered the soap dispenser was missing the seal. Took a week to order and replace the seal. Worked fine for 5 weeks. Then, on December 17, 2016, it quit mid cycle and I got the leak detected error message. Now I am in dishwasher hell. The store where I bought it said they were too busy to come and check it, so they told me to call GEs customer service number. GE sent out a plumber from Iowa (I live in SD). He removed the bottom panel, to look underneath and decided it needed a new pump and also a new soap dispenser part. That was on back order, so I had to wait until January 11, 2017 for him to come back. When he pulled out the dishwasher to replace the pump, he discovered the tub was leaking along the left side. He said the unit could not be fixed and suggested I call the store where I originally purchased it. They agreed the unit could not be fixed and contacted GE and got me a case number and said GE would call me by the end of the week. Im still waiting for that call. Do NOT buy this model GE dishwasher. GE apparently doesnt stand behind its products and the stores that sell GE are helpless to do anything for you.

My husband ran our 4-year old GE stainless steel dishwasher (PDW8980N00SS) at 9 pm, 2/4/13. At 11 pm, he emptied and put away the dishes. At midnight, we went to bed. At 4:50 am on 2/5/13, we were awakened by a burning smell and discovered the heating element of the dishwasher either turned back on or never turned off. We were unable to touch the granite counter, the front of the dishwasher, and both wooden cabinets on either side of the dishwasher were very warm. The spinning arms and other plastic parts were melted. The only way it could be turned off was to unplug it from the outlet in the cabinet. We were leaving for the airport at 7:30 am on 2/5/13, so needless to say, we would have lost our home if this occurred a couple of hours later. The Assurant tech said it was repairable and ordered a part, which would take at least a week. Assurant customer service had us call GE. When we stated we didnt want the faulty dishwasher repaired, but wanted a new dishwasher, the best the GE customer service rep could offer us was 38-40% off several new different Profile dishwashers. After reading page after page of bad reviews, most of which detail either one or multiple fires from different GE dishwashers, we dont even want another GE dishwasher in our home. We already needed the smart soap dispenser replaced, since it clogs periodically and doesnt wash dishes very well. We also have a countertop GE Profile microwave, and the turntable motor has gone out 3 times so far. Weve purchased the replacement motors ourselves since it isnt under Assurant insurance. Not sure what the resolution will be on the dishwasher, but wed be happy if GE would give us at least $500 toward a different brand dishwasher. I know well never ever buy another GE appliance after this. We wouldnt sleep at night or ever want to go out of the house without unplugging another GE dishwasher, so dont want one.

Our GE Cafe Appliance package is less than 1year old and the convection/microwave door handle is wrinkling and peeling. I realize that weight may be a concern hence the plastic vs. metal handle due to the side hinge of micro but aluminum or other light metal would have made more sense. A service tech is coming out next week to replace the in warranty handle however this cost will be our responsible next year when this happens again. A light metal retrofit/recall seems to be the logical solution to remain customer centric and maintain GE loyalty. How this material choice error is handled by GE to ensure this problem does not repeat during the life of this appliance defines brand loyalty. Thank you for your consideration.

This is the second time that my GE microwave oven is peeling the paint on the inside of the oven. We paid over $240.00 the first time and think that this is a serious flaw this particular oven has. I think that the company should be liable, not the consumer.

My microwave was purchased 2.13, costing about $500. The panel shorts and I paid for one GE visit, $150. And it happened again. My friend was here and said hers does the same thing. She has a neighbor with the same problem. I researched online and learned quite a bit about this machine. I found out that the panel shorts when youre cooking under it, and steam/heat rises into the machine. Makes the panel short. Im now demanding that GE return $150 service fee that I paid before I found out that its a defective machine. And this machine has to be replaced with a model that allows cooking with vents on. If GE does not do the right thing, I will make it a life goal that no one buy their products. Mark my words. Im this angry because I called customer service this week and was told that theyll give me a new panel but I have to pay for the labor and no refund for the $150 and no replacement microwave. This was insulting. Shame on GE.

We bought a GE dishwasher a little over 3 years ago. In the last week of September we awoke to the smell of hot or melted plastic. We found the source to be the dishwasher. I had loaded and started it before going to bed the night before. The counter-top above the dishwasher was stove top hot and upon opening the dishwasher found that a cutting board that we have had for many years and have always put in the dishwasher had melted on top of the heating coil. Dishwasher safe items on the top rack melted as well. It had been drying for at least 9 hours. After pulling the dishwasher out we saw the heat shield had melted and was crumbling. We contacted GE, sent them all the pictures and they told us it was not a safety issue. We have no doubt that if we had not woken up so early we would have had a fire in our house caused by the dishwasher.

I do not remember what I paid for this microwave, but my budget was low, and the value I got is good for the money. Ive never had any trouble with this oven, and its 5 years old. Its a good size and cooks evenly.

No issues yet. But only had for 6 months so time will tell. Read a lot of negative reviews but none here. Bought in Nov ‘18 from Home Depot. Delivered and installed on time. Replaced 13 yr old GE appliances that were still working.

To inform others that need an under-cabinet space-saving microwave, unless you are replacing an existing GE unit (and want the mounting brackets to align for easy re-installation), I would strongly suggest getting a different unit. I am about to buy my third GE undercounter microwave for the past 11 years. The rest of my kitchen is pretty high-end Thermadore, Kitchenaide, ASKO, and Braun. My last Profile PEM 31 DMBB lasted less than three years. The Toshiba that I bought while deployed to Okinawa lasted 15 years.

Microwave GE Monogram - For the second time in as many years, the glass door on my microwave just blew out and spewed glasses all over my kitchen. Luckily, no one was hurt except we are still getting glass in our feet a week later. My husband and I both contacted GE by email with no response whatsoever. Clearly, having read about this happening to many others, this product should have been recalled. It is their top of the line. The microwave wasnt even in use. GE must not need any customers and they have sure lost this one.

Our microwave was manufactured in September 2010 and we purchased it in October 2010. It has been used a few times a week for reheating leftovers. I have owned secondhand microwaves and unknown brand microwaves, and they have been more reliable than the GE Profile. My husband and I invested in the Profile series when we remodeled our kitchen. After a lifetime of moving and living in homes with much to be desired kitchens, we decided to spend money to provide ourselves with a functional kitchen. If I had to do it all over again, I would have saved myself the trouble and purchased my appliances from another company.After having to call GE to send out a repair person 5 different times to work in our microwave oven, we are left with a nonworking microwave oven. It seems that a company that has made record profits from their faithful American fans could do the right thing and replace the microwave oven with something that works. Perhaps they do not have such a product. They have offered to let us buy a new one at a big discount, but they have not clarified what the percentage will be. The problem I have with this is that spending one more dollar on a product with no backing from the company it came from would be asking for more let down. I believe Ill have this lemon removed and quit before I take on any more consumer letdowns.

My microwave (model#JES1139BL03 and serial#901897B) is peeling around rolling fixture that holds glass tray. I wipe it with hot water and it continues to peel off. Its almost all gone. Ive only had it two (2) years. This cant be normal. Anyone else have this happen?

Nine cycles but none of them dry the dishes. Very quiet, cleans the dishes very well. Like the third drawer, very handy. The only complaint is that it does not dry the dishes. No combination of cycles will dry the dishes.

The GE over-the-range, model JVM316URFSS was installed in our new home by the builder. We have been in the house and used the microwave moderately for the past two years. Last night, out of nowhere, the microwave started running. I realized that it was actually heating when the glass turntable popped. I jumped up and opened the door to stop the heating. The turntable was broken. The interior was incredibly hot. Having read several reviews I realize that this is not an uncommon problem. I am going to buy a replacement but I am very concerned by the fact that GE is aware of this recallable situation and continue to allow this product to remain on the market. I will NOT purchase another GE because apparently they do not care. Our house could have burned down had we not be home.

About two years ago I moved into my condo and as a housewarming gift my sister gave me money to buy a microwave oven. I bought a GE over the range microwave. Well it quit over two months ago - really disappointed. I bought the next one but now after reading all these similar experiences I am sorry I bought the same problem.