Their service department is absolutely terrible. The motherboard went out after only 8 months of use. They never notified the appliance repair company that the part was back ordered (I had to follow-up on that) and every step of the way I kept being told someone will follow-up in 2-3 business days. No one ever followed up with me, I had to call to check on the status of my claim EVERY time. The request for a replacement dishwasher after two weeks was denied because the part was going to be available in another week, but then I wouldnt receive the part for a minimum of another week after that. When I asked to speak to a superior she refused and told me no one was available. After demanding to speak to one I was told they would contact me in ANOTHER 2-3 business days (well see if that ever happens). This is (still going on) an absolutely awful service experience. I dont care that the dishwasher broke, I care that theyve handled it so poorly.

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

Have had this microwave for about three years, no problems so far. White so it matches our other kitchen appliances. Good size for most uses and easy to clean.

On 05/04/2014, our GE microwave over the stove unit burst into flames. My wife was sitting in our family room and heard the microwave fan start (spontaneously). Then she observed flames reflected in the kitchen window. When she went to the kitchen, she observed the interior of the microwave was aflame. The fire was extinguished with a spray bottle of water. The burning items appeared to be insulation. The fan from the microwave was with the burning insulation on the rotating plate.

The GE dishwasher was in place in the home that we bought in 2017. I like the stainless steel outer color, the noise level is minimal, which I like. The options for different cleaning levels are great. It does a good job at cleaning our dishes. My only negative comment is that it was new when the house was built in 2017. For the past three months it has been stopping repeatedly, multiple times, mid-cycle so that you have to repulse the start button multiple times to finish the cycle. It is barely three years old and seems to already be giving out which means we will have to replace it, probably soon.

I purchased a GE Profile dishwasher in June 2015. It was delivered dented.19 July it was replaced. The dishwasher worked for 3 months. Then it stopped working and the display panel had a LEAK DETECTED, DO NOT USE, notification. We contacted GE who could not find a GE repair technician to come and repair it in the entire BAY AREA. The dishwasher was bought at SEARS who refuses to take any responsibility.

Microwave Model JVM1750DP2bb defective construction- Plastic is protruding inside the Oven. Took possession of a new home in January 2014, but only occupied part time. I estimate we had the equivalent of 6 months being occupied. In January 2017 the magnetron broke down, at which time I noticed a piece of plastics protruding inside the microwave through a vent hole on the Magnetron side. I did not take the extended warranty and GE only offered to send a repair man. Since this is an over the stove model venting outside, it had to be repaired or replaced. Checked with the supplier and they estimated a minimum of $ 300 repair cost. Home Depot had model JVM6175DKBB on sale for 249.00, and with delivery, and installation, were talking $ 350.00 to $400.00 to replace. I got in touch with GE Consumer Affairs, and they did eventually agree to provide the JVM6175DKBB for $ 270.00 including installation. They will take possession of the old model, so there wont be any way for me to confirm or deny a manufacturing defect.

I purchased my machine in 2019. The only concern I have with this machine is that I’m never sure of the amount of water that fills the tub with some features that I’m not used to. The tub on this machine enables me to wash very large loads including my queen size quilt. After washing, my clothes are practically dried which cuts down on my electric bill for the dryer. The drain and spin feature allows for a drier finish. Everything else is good. As long as you’re using the right soap the clothes are the cleanest.

We bought this dishwasher, with third rack and steel tub, after extensively reading reviews online. We went through Home Depot and had to wait a month for the dishwasher to be delivered. We have had it just over a month now and not only does it fail to get all of the dishes completely clean (even when run on heavy cycle) it NEVER dries even with the dry boost on. We never overload it or load it incorrectly and still there are dishes and utensils with food residue after its done running which takes hours. I predict it will rust out in about five years (planned obsolescence). The only feature Im happy with is that it is nearly silent. Not hearing it run helps to not remind me how much money we wasted.

This unit was purchased at Lowes on 11/22/16 and installed by our plumber shortly thereafter. Its not even 6 months old! It was poor at drying at first and then stopped drying altogether about a month ago. The GE Customer Service has sent a repairman here on 4 occasions in the past few weeks, sent faulty parts, including an element and a board (Im guessing that they mean a motherboard) but it is still swimming in water. Ive asked them to replace the dishwasher, to which they have refused. Yes we are irate, and rightly so. Whatever happened to quality manufacturing and decent customer service? I will never buy another GE product again. There should be lemon laws for appliances.Now we are being informed that the parts are back ordered until September, but that they might be able to get them from California on or about the 25th. Their apologies mean nothing when they do not back it up by amending the situation in an appropriate manner. By the way it takes 256 minutes for a full cycle. The plus side is that it is very quiet, but Im not sure how energy efficient a dishwasher can be that runs that blasted long. It doesnt clean very well either. If considering the dishwasher or another appliance, stay away from GE Is our recommendation.

This is a work horse of a machine. I have been using it for 12+ years. Not my first choice, but it was here when I moved in. Still going strong. So why change now, when its doing its job. My first dishwasher choice would have been a Bosch, because they are so quiet.

Purchased an entire kitchen suite of GE appliances. Almost instantly the fridge started making loud noises which the repairman told me was normal. LOUD AND OBNOXIOUS. I wear earplugs in my house to avoid the noise! Secondly, the dishwasher started leaking and the warranty company is refusing to honor the warranty so Ive been hand washing dishes since August! They also refuse to refund the extended warranty fee. Currently filing a protest with consumer fraud. STAY AWAY FROM GE, isnt that a shame! THEIR PRODUCTS ARE JUNK!

We purchased a GE Profile Dishwasher from PC Richards & Sons in 2012. We purchased the extended warranty. The top of the door started to rust on left side within the first year. Death in family and called just after warranty ran out. The rust turned into a little hole. Door replacement was no longer available when I emailed GE directly this year. GE Representative sent me a $50 rebate to use to buy another GE. The dishwasher works wonderfully but appearance is awful. I will never buy another GE appliance.

I purchased a jes1451dn1bb microwave 16 months ago and I just noticed the enamel coating on the top of the unit is chipping. GE has been unhelpful, saying it is outside the warranty and I need to mail the cord and sticker inside it to have a rebate issued. Since I use my microwave daily, I cannot wait until it is processed to buy a new unit. Not only did the product endanger us with exposing our food to paint emissions, the company has been unhelpful. I highly recommend buying another companys product and do your research!

We purchased a new home with a GE Profile dishwasher installed. Since the day we had it, we have never been satisfied with the cleanliness of the dishes. They frequently come out covered in food and must be rewashed. We now routinely prewash everything in the sink and we always use the cookware setting to wash everything. Despite this, we still have to re-run loads because they are not clean.I am convinced that there is a design error with our dishwasher, because the top dish shelf obstructs the door of the soap compartment and prevents it from fully opening. After a load has run, you can still see leftover soap dried and crusted in the soap container. If the dishwasher cannot even wash the soap out of the soap compartment, no wonder our dishes are not clean.

I bought GE Profile dishwasher (PDT750SSFSS) from Home Depot on Sept 2014. First week it had some drying issue and GE service technician told no issue with dishwasher. After 4 months, electronic control board stopped working and GE service technician replaced the board. It worked for about a month and again same control electronic board failed and need to be replaced by GE technician. Again within a week again board failed for 3rd time. This time I asked for a replacement from GE since same board failed 3 times but GE refused to replace and told they can only repair and cannot give a replacement of dishwasher. Again for 4th time same control board failed now and I have contacted Home Depot for help. I dont know what to do this time and I dont want to repair this dishwasher anymore. It is only June 2015 and it had been repaired for more than 4 times. Ill try through Home Depot to get a replacement, if not Im planning to go through consumer court and file case against GE Profile. I would appreciate if somebody can help in resolving this issue and you can contact me through my email.

Today I heated some spaghetti sauce in my microwave and it splashed, so I wiped it out. My microwave is built in and was pretty new and in the house when we bought it 4 years ago. It is in the base counter so I have to reach down to clean it. l havent had a problem with it but when I wiped the inside top I felt bumps and when I looked at the cloth to see what was on it, there was paint on it. That has never happened before so I of course looked and there is a fair amount of peeling paint in one spot. I have had microwave ovens for many years. Never had this problem with any other brand. What is that?? Can it be fixed? Is it dangerous???

My GE model JEB1095BB04 microwave/convection oven is 6 years old and the magnatron has failed twice. The first time, GE said they would replace the part free of charge, but I had to pay for the service call, which I did and it cost me $212.00. Now, the part has failed again, the second time in 2 years, and GE basically said you lose. A rep from GE told me that they only guarantee their products for 1 year. There is no doubt in my mind that all GE products are garbage and I would strongly discourage anyone from buying them. I will gladly take my GE microwave, smash it into pieces and replace it with a KitchenAid appliance, which is backed by a reputable company.

I bought a 1.6 cu ft microwave at Christmas, microwave failed within a month (electric burning smell and microwave quit). Contacted GE to replace and was given a run around (told to buy first, send them the receipt, then they sent a check). Finally they replaced now - have the same issue with the new one. Never buy a GE appliance, I certainly will not!!

GE Microwave Model JES1139BLO3, Serial # VS904116B - The above model was purchased at Lowe’s in Ventura, CA about a year and a half ago. In that time, the white coating on the inside of the microwave has been deteriorating, beginning with the area under the turntable and extending out to the bottom and sides of the unit. I am concerned that our food will be contaminated by the particles that are coming off or that there will be a fire caused by the microwaves hitting on the uncoated metal. I do not plan to ever purchase another GE microwave.

My GE microwave is not complicated to use. When cooking prepackaged dinners it cooks perfectly in the time the food instructions say it will. I have used other microwaves that the food is over or underdone. No problems with defrosting fruit either. I am very pleased with cost and performance.

My GE dishwasher is just OK, I would say. It saves water and money. It is fairly efficient to load and pretty effective at washing on normal but many times I need to hand wash the big or hardened food off the dishes before loading, which feels like more work than should be necessary. Id rather not wash my dishes twice.

GE Microwave was making intermittent buzzing noise 1 month after purchase. Called GE & they said they could send a tech out to check it but if they didnt find anything I would be charged a service call. I stated it would only do it once in a while so was concerned it wouldnt do it when tech was here & I would be charged so I passed on the tech. Microwave continued to make noise periodically but seemed to get less as time went on. 1 year & 10 months later it started to sound like it was arcing & shut off. Again it was periodic. Called GE. They sent a tech out & it only shut off but no arcing sound or intermittent starting & stopping. Tech stated it probably was door micro switch, but when GE called me back they said he stated it probably was circuit board. Whatever the cause it is still what I would call arcing & going off & on.GE stated They could give me a discount on a new microwave which amounted to cost of $100.00 more than I paid for it in the first place.

We first noticed a problem with our two-year old dishwasher when the lower spray arm broke. Soon after, the door seals started to leak, and we noticed the seal at the bottom of the door had completely degraded becoming brittle and breaking off. Our warranty had expired, but I contacted Mabe. They agreed to replace the parts free of charge, which amounted to approximately $300. I expressed concern that the dishwasher may have been overheating, causing the above problems, but this wasnt given credence as the technician didnt speculate in his report on the cause of the damage.Within the next month, we had a massive water leak. Upon inspection, the dishwasher showed signs of extreme heat. The sound insulation had bubbled and melted off much of the exterior of the tub. The electrical supply cord had a scorch mark. Once again, Mabe was notified. After much negotiation, they agreed to refund the price of the dishwasher. Initially, they had offered a certificate valued at 50% of the cost of our dishwasher towards the purchase of another GE dishwasher. This offer was declined as we wont have another GE dishwasher in our home unless were convinced theres no fire hazard.There are significant repairs required to our home due to water damage but we consider ourselves lucky to have avoided a fire. GE has had problems with their dishwashers in the past which resulted in a massive recall. Its time for them to acknowledge that there is a problem with the Cafe line and take measures to rectify the problem before someone is injured.

I also have a GE Profile dishwasher with malfunctioning wheels. I read this site, and was comforted and enraged that I was not alone with my melting wheels. I sent GE customer service a note, explaining my problem. I also included a link to this site in my note. I explained that I was a loyal GE customer and that they should stand behind their products although my unit was no longer covered under warranty and did not qualify for the recall. GE responded to my e-mail with in 12 hours. They sent me a complete set of new wheels for my bottom rack free of charge, and sent out a technician to install them, again free of charge. They also e-mailed me to make sure I was happy and no longer had concerns. I am thrilled with my experience. Let me say that again I e-mailed GE and within 8 days (a holiday included), I had new wheels and a technician to install them at no charge.

The dishwasher is poor quality. Top is thin, top dish rack has trouble with tall glasses. Bottom rack doesnt slide in and out well. The power cord and water cords are too short. They are 2 ft shorter than our previous model dishwasher. Top was loose when delivered and had the wrong screw in one of the holes. The hose and cords are difficult to hook up because they are so short. We cant fit as many dishes in as our previous model of the same size and the unbiased reviewers are saying its washing quality is poor. We havent had it long and hate it. Home Depot wont take returns on portable dishwashers though. Out lots of money on this. This GE is thin plastic trash that costs lots of money with no return.

My GE Dishwasher is disintegrating. Its three years old and we didnt live here for a year of that time. The door where all the electronics just fell apart. I bought the most expensive GE Dishwasher I could find at that time because we wanted one that was quiet due to the way our house is laid out. We were able to put the door together again but the strip across the top never fit again so we taped it on. Model PDT750SSF1SS. The controls wont work.

I brought our brand new home just over 1 year and 8 months ago with all new GE appliances. One of the GE Smart Built-In Double Wall Ovens, the bottom one which we never use, but the inner glass shattered randomly, very dangerous and they want us to pay them $100 for the inspector visit and then more for the par and service $325 for the replacement, the GE is disagreeing they had a defect on installations. That is an experience that we never repurchase GE brands, my friend had the same issue. They replaced in their house this way without warranty, however they disagreeing our oven had the defect on installation, lesson learned, never never buy the GE again!

I have had a fridge, a washer and a microwave oven from GE. I have been so disappointed in all three, but the microwave oven disappointed me the most. The door broke around the handle and the hinges, and was replaced shortly after buying it. Then it broke again and I replaced it myself. Then it broke again. This makes me not want to try another GE product. The fridge shelves all broke because they were plastic. The washer fell apart shortly after a year. It is just myself and my husband using them, so they should last for years. When you buy large item, you would like them to last a long while.

I moved in to a newly-built home in Nov. 2010. Shortly after, my GE Profile microwave seemingly caught fire. We called for service and were offered a repair free of charge. We declined a repair and did receive a brand new appliance of the same model. Around June 2012, the exact same fire happened to the new one. I must admit that it took me about 9 months to report the problem because my family had been devastated with a lengthy illness and passing of my mother. While going through our trial, I shut down my mothers apartment and just started to use her countertop microwave. Realizing that I needed to address the problem with my microwave, I called and explained this to GE service. I guess that the representative was just doing her job and stated the year warranty spiel and had no concern of this being my second microwave within a two and a half year span and also the length of time that it had not been working. I was immediately given the cost for a serviceman to come out plus I was told that I would have to pay for any parts. When I went to Home Depot to price the microwave; the cost for my model was $278. I therefore decided. Why bother to have a defected model repaired? Who needs the aggravation? I will just eat my loss and buy another microwave. Be assured that it will not be a GE. I will never again buy a General Electric product.

We purchased our GE dishwasher in September 2014. In December 2014 the dishwasher started to make a loud grinding noise. I contacted GE and a repair man was sent promptly to do the repair. Upon arrival and looking at the dishwasher he advised me that it was the motor. He then stated that he would order the parts and also stated that he did not have the correct tool to remove the motor and has not had one since they have changed the manufacturing process. At this time I am still waiting for the parts and I have contacted GE numerous times to find that the parts were either on back order or had been shipped out. I am still waiting for the parts and the repairs to be done. The estimated date of the parts to arrive is January 29th. At that time I will have been without a dishwasher for a month that I have just purchased.

GE Profile Dishwasher Model GLD4400N10WW - This was the second GE dishwasher I have purchased and it will be the last. When guests come to my home, they ask whats wrong with my dishwasher when helping me in the kitchen. The racks are bubbled and there is a burn mark by the heating element from overheating. The dishes have always been too hot to unload afterwards that you have to leave the door open for ten minutes before touching them, or you will burn your hands. I purchased this dishwasher from Lowes on 2/23/2008 for $368.88. I see that there is a recall on the dishwasher now, and it is only worth a repair. Quite frankly, my dishwasher is all ruined inside and it needs more than just a new heating element. It isnt worth it to me. It is very noisy and sounds awful when I use it. I will not be putting any money into replacement parts at this point, and I am very disappointed with my purchase. A dishwasher should last more than 3.5 years. My dishwasher should be replaced for free, not just get a new element. My husband is a licensed builder and he will not be using GE either, after this experience. I am enclosing a photo of the burns.

Microwave GE Monogram - For the second time in as many years, the glass door on my microwave just blew out and spewed glasses all over my kitchen. Luckily, no one was hurt except we are still getting glass in our feet a week later. My husband and I both contacted GE by email with no response whatsoever. Clearly, having read about this happening to many others, this product should have been recalled. It is their top of the line. The microwave wasnt even in use. GE must not need any customers and they have sure lost this one.

We built our house and purchased a NEW close out Advantium Microwave. Due to delays we were not able to get into the house and use the appliance until literally 1 month after the WTY expired. The KEYPAD is shorted. There are a number of these complaints for this microwave - so we arranged for service. $375 dollars later - it was ALMOST working and the repair service determined that a new keyboard would be needed. 5 mos later we are kindly asked to take a refund of our repair bill and forget the whole thing - the part is not available! REALLY?! $2000 for a microwave, and you dont even support it?! Last - LAST time I put trust in GE. SCB2000FBB 03

Dishwasher lasted just little over a year when it broke down first time. Power switch made out soft plastic jammed up. Next cheaply made door close switch cracked. Part prices are average price. Because poor quality, I predict replacing this within 3-5 years.

Dont buy one. I bought two last year. The first one completely died before the 60 days were up. I took it back to Sams club and bought another. The tag inside says it was made February 2011, so its only a year and a half old. Under the carousel, the paint is peeling big time. I wrote GE repeatedly, asking if it was still ok to use it. After ignoring me for quite some time, I got this reply. In the notice, they told me to get Sams club to replace the defective and apparently unusable product they are selling knowing it is defective. I love the part where you cant cook something with too much liquid in it. Who does that when they microwave?Heres what they said: Thank you for contacting GE regarding your microwaves and the paint peeling issue. I did some research on it and found that it a common issue among all brands. Excessive heating of un-covered liquids can create a high amount of condensation that the inside paint is not meant to withstand. Minor chips to the coating on the microwaves interior cavity will not affect the products performance. However, if the coating is actively flaking or peeling anywhere inside the oven cavity (including under the turntable), discontinue the use of the microwave and replace it. GE does not have an approved method of repair, and the microwave is not repairable. Please return to Sams club for an exchange, if you are still within the one year warranty. If Sams is refusing to accept the return, contact the Sams Club Support Team at 1-877-885-2787. GE will then reimburse Sams club.

I cook a lot of popcorn in my microwave and it hasnt burn a bag yet. It warms food quickly. Also, it cooks bacon really good. But the best feature is the steam cleaner that saves me time. It steams for about 2-3 minutes then all I do wipe the steam off and its clean.

We purchased a new General Electric (GE) Adora microwave model DVM1850SM4SS from Home Depot for approximately $355.00 in 2010. It was manufactured in Malaysia and had been in use for 2 years and 9 months before the magnetron failed. I spoke with a GE Customer Care representative on two occasions, and she said that the best that GE could do was split the cost of parts and labor since the 1 year warranty had expired. We had not purchased the extended warranty believing at the time that a microwave generally lasts for many years, and GE had always made quality products and would stand behind them. I indicated that I wanted to have the problem properly diagnosed by the service rep recommended by GE before proceeding further. The 10-minute service call bill set us back approx. $100.00. It would cost at least another $170 to replace the magnetron if we used the service tech contracted by GE. For $270, I believe we could find a fairly nice new microwave. I looked at alternative options for repair or replacement, since I am rather partial to the looks of the over the range stainless steel Adora. The model we have is no longer manufactured, but GE now offers the 1.9 cu. ft. Adora that Home Depot sells for around $400.00. In my internet research, I noted several postings that indicated that due to the high voltage danger of the magnetron, only trained technicians should attempt repairs. After half a dozen calls, I fortunately learned of a Microwave Service Center close to our residence that could replace the magnetron. After taking it down from above the range, hauling it in for repair and paying the approx. $104.00 bill and hauling it back to our residence to mount on the wall, we have a microwave that should work for a while! Total cost including service call for diagnosis - $204.00. Considering that GE does not wish to stand behind the quality of their products, I would not be likely to purchase a GE product again.

We recently purchased three GE Profile stainless steel appliances for our new home. The total was somewhere around $3500. Within two weeks our $1000 dishwasher would not work. It took FOUR service calls and THREE weeks for it to finally be repaired. Now our $2000 oven (traditional/convection) has stopped working and the oven light will not go off without us tripping the breaker. Service tech not available for 5 days. I am expecting the new micro to go out any day now. All of these appliances are less than two months old. We had GE builder grade appliances in our previous home that are still running strong after 16 years. That is the reason we went with GE again. However, after the above mentioned issues with our new GE appliances, I encourage anybody who reads this to NEVER, EVER BUY ANY GE PRODUCTS AGAIN.

I have many other things to do other than to voice my extreme and total displeasure with your company. GE - Huge Company, Small Customer Service. We purchased a GE microwave oven from ABT electronics in about August, 2013. In October, 2014 we had issues with the fan remaining on while the door was closed. Called GE. They said the unit was out of warranty by about 2 months. We felt that was a short period of time and that we called as soon as the issue became chronic.Had three service calls where the techs tried to fix a simple problem. First tech walked through our living room with dirty boots. Didnt fix the problem. Messed up our carpet. Bad attitude. Second call, two techs couldnt fix the problem. Said it was a door issue and they made some superficial adjustments. Problem not fixed. Third call, two more techs. Same result. In the meantime I tried to convince GE that I didnt want another service call. I wanted a new unit. No luck. I was offered a discount to purchase a new unit for around $300 or so. Im sure they spent more money on service calls than a new unit would have cost in terms of dollars and the reputation of one of the worlds biggest companies.Now, the fan for the unit stays on almost all the time after the cooking is done. Is this the best GE can do? If so, thats pretty sad. Tried to reach someone in sales who would get it. No such luck. DONT BUY GE AND IF YOU HAVE ISSUES DONT RELY ON A FACELESS, CLUELESS CUSTOMER SERVICE DEPARTMENT TO HELP IN ANY MEANINGFUL WAY.

We had a GE dishwasher installed by the builder when the house we live in was built and it was one of the ones which were recalled as a fire hazard. We didnt really have any issues with it though, other than it was a bit noisy. With the credit offered, we decided to upgrade to a high end Profile model. The sound proofing is impressive and it was actually hard to tell the unit was on, but that is the only thing you can say that is good about the machine. As a dishwasher, it fails miserably and often items come out dirtier than when they went in. OK, weve struggled on with that for some time now but today, a nasty burnt plastic smell brought us both to the kitchen to investigate. Sure enough, the replacement for the fire hazard was the culprit. Obviously, it will need some serious repairs before it is safe to use once more. Looking through this and other sites, it seems this problem is rife and GE is reluctant to deal with the issues. Well I think that will be our last GE appliance. Thank you very much and rather than throw good money after bad, we will put the repair costs towards another machine ABGE.

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

I have a GE microwave oven. The paint inside the door is peeling off and has been for quite some time but I never got around to calling them. I recently decided to purchase a new microwave and use my old one downstairs. I called GE to ask them about this problem as I didnt want to have this same issue with my new microwave. GE told me they would do nothing to help me fix the problem and I need to stop using it because it is a safety hazard. I told them the microwave still worked fine and if I need to stop using it, does GE offer any compensation for something that is obviously a defect. I was told, no, GE will do nothing. I told them Id even be happy with some touch up paint but the lady was so rude, she would just sit there and not say anything until Id ask, Are you still there? Granted my microwave is several years old but because of this door defect, Im being told basically I use it anymore even though it still works. I need to just throw it away. I have a new GE microwave on order but thanks to their horrible customer service will be cancelling that order and buying another brand. I also will not ever purchase another GE product. I told them this and they said, fine. Obviously they dont give a crap about their customers.

Purchased my GE Profile series dishwasher several years ago and it has served me well over countless cycles. There have been a couple of occasions that it required repairs (water leaking) but had been done so under warranty conducted by an actual GE tech. When this unit finally reaches its usable service life I’m most likely to consider a GE unit again.

Had it over 12 yrs. Never a problem. It’s a wall mount microwave. Easy to clean stainless steel. A bit of a pain to clean the stainless steel inside of microwave. Would recommend the microwave to people looking for one.

I recently purchased a GD720SGF2WW Serial #HD744674B GE dishwasher. From the moment I tried to use it there was a leak from the bottom of the door. I called for service and when they came the repair man said the door was leaking and there was a repair kit for it so it must be a weak spot in this particular dishwasher, which by the way was not a cheap model and was stainless steel lined. I waited a month for further service and when he finally came he realized he had mistakenly diagnosed the problem and it was a crack in the lining of the door which had gradually gotten bigger as I waited for service. So this NEW dishwasher had been leaking onto my newly installed hardwood floor. By this time I had no faith whatsoever in this dishwasher and said I wanted a replacement. I was called back and told that they would only repair it, which I have been trying to do since NOVEMBER and it is now Jan 21! I will no longer buy GE products and when I called customer service I was on hold for 20 min and finally hung up which Im sure was their intent.

GE Microwave Model JES1655DR1BB - I have had many microwaves over many years but never had one malfunction as bad as this one. I am only glad that it happened with me rather than my wife or child. Or, if I had left the room while it was on. Immediately after turning the unit on, it started making loud electrical arcing noises and flashing light. I had just placed a microwave safe glass dish inside. I removed that and tested again with nothing inside. Same thing happened. I next thoroughly cleaned the unit. Tried again. Same thing happened. I had paid a little more for this unit than the usual believing it would be worth it. It clearly was not.

The dishwasher runs and works very well. It washes all dishes, pots, pans, glasses and silverware great. Weve never had any problems with this dishwasher thus far. I would recommend this dishwasher to anyone in the market.

Purchase a GE microwave Jes1142sp2ss on December 2014 from BrandsMart. The paint on the bottom of the microwave is peeling off exposing the metal. I have never ever heard of this happening on a microwave. I will never buy another GE product.

My Quiet Power 3 model GLD4450N10CS didnt clean well from installation (July 2008). But I ran the heavy wash as the norm. And I never used heated dry in case I had to rewash any of the contents. I ran my dishwash last evening. I went out to dinner and returned to a burning smell in my house. I opened my dishwasher and smoke came out. The plastics were melted. The cabinet next to my dishwash smelt of burning as well. The detergent table sat partially dissolved on the bottom of the washer. It took 2 hours to cool down. My dishwasher no longer goes into a wash cycle (even after unplugging it overnight). I have left it unplugged as I feel it is no longer safe. GE says it is $80 for service plus parts. And they said that if I dont repair it, I get $100 certificate to use online to order another GE. Its not worth it and I am very upset. I replaced all my appliance in 2008 with GE. My dryer had to be repaired. My washer was a lemon and they swapped it out for a new model. And now my dishwasher died and almost burned my house down.

I have a 3 and a half year old GE Cafe Dishwasher which I paid over $1400 for and yesterday, when I ran it, I had a couple of cups melted when I opened it. This morning, I opened it to remove the remaining dishes. I closed the door to it and left for work. I did not run it again, just emptied it. My husband came home about an hour after I left to a house filled with smoke and the smell of melted plastic. He opened the dishwasher and found everything inside melted. The spinners, the silverware holder and all the plastic rack dividers were totally melted.Apparently, the heating element stuck on and overheated it. If he hadnt come home when he did, I believe our home would have caught fire. He said the whole kitchen was much hotter than the rest of the house. The service repair man said it cant be fixed because it got so hot it melted the seals in the motor. It was not a wiring problem with the house. It was a problem with the dishwasher itself. So now, I am out $1400 plus a house full of very toxic smelling smoke.

GDF520PGD088 - Never again GE. If you just invested some money in your R and D for the products you sell, maybe I would not be calling you all the time to fix what was broken to begin with. So to sum you up, 600.00 purchase, the day it was deliver and installed, another 200.00 and it still will not work properly??? I found out that there were 2 recalls on this product while sitting in the warehouse for sale, I guess I was lucky. 6 service calls later, still does not work properly and you want continue to charge me service calls for this disastrous dishwasher of 3 years. No I am done and I will share this horrible experience with everyone I know. Buyer of GE product, please beware. Quick to take your money yet irresponsible in standing behind their products.

After 6 month of leaking brand new dishwasher, 5 appointments of technicians that are lazy and lying on their reports, as well as have no clue what are they doing, with unreachable Case Manager and complete unprofessionalism. This is so far the worst experience in appliance purchase. DO NOT BUY GE APPLIANCES! DONT WASTE YOUR TIME & MONEY!

Looks great after 7 years, still works good. Could use larger drawers and the soap dispenser hasnt opened a few times. After 5 years of use weve had to rerun the to clean the dishes.

GE had a recall but only gives you 50.00$ to replace it or fix it. We could not afford a new dishwasher. I talked to GE and they were no help at all. So we still use this machine but we do not run it unless we are home. This was the machine that would catch fire.

Front of door never seems to clean up well and its stainless steel. Occasionally if you use the start delay and a harder pod it can stick and not dispense fully during wash leaving a chunk of it. I love the ability to run half loads. Smartly designed, and easy to use.

We bought a GE dishwasher July of last year. In December it started to shut off some off minutes into the cycle. FOUR months this piece of junk has not been working. Three times someone has been here to say oh it should be working. They are sending someone out for a 4th time now. Should have already been replaced.

We purchased all GE Profile appliances when we built our house 4 years ago. The dishwasher, for the second time, has turned itself on and melted everything inside and got smoke in the house before we discovered it. I am afraid to have it repaired for fear that it will happen again when we’re not home or asleep. There seems to be a lot of people having this problem, yet I do not qualify for any recall that I can find. I am disjointed in GE to say the least.

I just wanted to make future purchasers aware of an issue I had with the oven light (GE over-the-range microwave model JVM1540DM5BB) underneath the microwave. It is much dimmer than my previous GE oven. I bought it from Lowes and after returning to the store to check a floor model, I discovered none of the models were plugged in so you cant check this out in the store. You only find out once the thing is installed. Lowes referred me to the manufacturer who then told me, after asking if my oven had 1 bulb or 2, the oven was working as designed. How they could definitively determine this over the phone was beyond me, but that was the extent of the assistance.

I have a GE microwave and was using the exhaust fan on it when it stopped working. I am getting the same message as other folks - KEYPAD SHORTED. I have barely used this product since it is in a vacation home. It looks brand new, but I am really disappointed in it. My cousin told me shes had problems with GE appliances and will never buy another.

I spoke to someone in the customer relations department after contacting GE cares. Our GE refrigerator purchased 16 months ago had malfunctioned. Within minutes of explaining the problem GE located my file in their system. They immediately extended the manufacturer warranty as a courtesy. I didn’t have an extended warranty but GE arranged to have the service technician come to my house to repair, what he discovered was a broken fan, in less than 24 hours at no cost. While the likelihood of a fairly new appliance needing repair is rare, the service technician did explain that repairs needed with GE appliances does keep him very busy. I am thankful for their CARE and saving my Thanksgiving turkey!

We purchased a GE Adora Dishwasher less than 6 years ago from Home Depot. An unknown continual leak has caused substantial black mold, warped sub flooring and cracking of very expensive Saltillo tile of which weve had to remove. GE should be accountable and will be. Nearly, a $800 Dishwasher will cost us thousands in repairs and mold abatement. Unbelievable.

I purchased a Ge profile top of the line microwave installed over an electric oven. After 3 months the plastic handle came off and Ge replaced the entire door. This handle has now come off 3 times. The service tech said it has a plastic connector that weakens over a stove. It supposed to be mounted over a stove. This is just poor design and totally unacceptable for their top of the line microwave.

Purchased the cafe dishwasher in March. We are now on our second one as the first did not work and now this one does not work. It worked fine for the first couple of months and now it’s doing the same thing as the first one. Pump is on the fritz apparently. Truly disappointed. We owned the cafe dishwasher at our last house and loved it so we made sure that we purchased the same one when we bought our new house.

My dishwasher is a little over 3 months old. Sure its quiet. But I use the heat dry always, but it doesnt dry the top bottom or side walls and it stinks and a lot of food is sitting on the strainer and stinks. I have owned a GE dishwasher for over 25 Years and have never had one that was not completely dry at end of cycle. I have to hand dry my silverware. My Model Number is GDF510PSD4SS Serial number is FF736760B. I want a full refund and take back this reject. I will buy something else, I assure you it will not be a GE Product. Sign me, thoroughly disgusted with this Ge product.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

New home community - all GE appliances. Model PEB7226SF2SS microwave scorching and catching on fire; GE doesnt stand behind their products and homeowners cant use because products our dangerous (per tech).

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

The GE repairman just left. It wasnt the coil that was flaking, it was the eco dish washing detergent I was using. The detergent wasnt dissolving, it was clogging up the jets and burning on the coil. What I was seeing was black burned detergent flakes. The repairman gave me citric acid to use to clean out the clogs (for free). He also didnt charge me for the visit, even though it was my fault. He also told me to get the water in my sink really hot before I start the dishwasher. I am very impressed with his service!

Our GE microwave does all the things you would expect from a basic microwave. It cooks vegetables, reheats leftovers and warms coffee. It looks nice on our counter. Do I think it is worth the money we paid for it, NO.

GE brags about employing its own service technicians yet, when I called to schedule an appointment to fix our Advantium 120 microwave (3 years old), they told me that unless I provided proof of purchase to the technician, he would charge me even for parts under warranty such as the magnetron tube. This in spite of the fact that they have all the purchase information at their fingertips, as I reported when we registered our purchase. They even told me our date of purchase, had our address, email address, etc. They dismissed my suggestion that an email from them to me that I could show the technician should suffice. After 3 years and severe family health issues, I have sadly misplaced the proof of purchase, not realizing that registering the appliance for warranty provided no real benefit; not even proof that I didnt steal the thing. I am saddened that a company of the former stature of GE would stoop so low to avoid a legitimate warranty repair.

I have purchased a GE microwave/convection oven 7 months ago. A month ago, the control panel broke down and it would not turn on. I called up customer service and a technician was sent after a week. They have diagnosed it and the motherboard needed to be replaced. The said part was ordered and I was told it would be delivered in 2-3 days and a service will be scheduled in a week. A week came and no parts showed up. I have called up customer advocate and they assured me the said part will be delivered in time for the service appointment.Unfortunately, when they came, the said parts have not been delivered and I was given the lame excuse of systems failure; the request has not gone through their system. So the technician assured me that he will put in an overnight request for the said parts and the oven could be fixed within the week. He even gave me his work and cell number for me to call if I have any inquiries. But he never picks up or even returns my calls. So another service appointment was scheduled and parts were delivered, only to find out that it was the wrong parts, supposedly for another customer and for a different microwave model.Its really frustrating when people keep on reassuring that they are going to get it done, but has done nothing but lip service. Its been over a month and my microwave is still a broken microwave. I have learned my lesson and will never again in my life time purchase a GE appliance. PS: I should have listened to the Home Depot guy that sold me this microwave.

Its an older Hotpoint, and the layout is fairly roomy for a dishwasher of its size. The last apartment I was in had a comparably sized dishwasher that had too many shelving elements that got in the way of being able to just shove some dishes in there. Ive discovered with this dishwasher I need to stick to powdered detergent because the Hotpoint doesnt fully dissolve tablets. It does a fine job overall, though.

Purchased a GE 650 dishwasher which we quickly discovered has terrible racking for North American dishware. Also the control panel is overly complicated yet limited to use (always flashes settings even when not in use). Once you figure out how to load dishes into the very tight/ narrow tines they fall over and chip/break. When investigating the dishwashers by GE made in China/Taiwan etc all have same issue. The ones made in USA by GE have wider and longer tines. We have had MANY dishwashers over the 40 years and NEVER had one as bad as this.When calling GE customer service the senior rep was not willing to offer any customer satisfaction as nothing technically was wrong. At one point she stated we had made the purchase so live with it even though it was the wrong choice. We offered to pay for any cost difference, etc. When questioned about GEs interest in customer satisfaction she stated that was not a warranty issue. She was not concerned about a satisfied customer. With that, we will not be purchasing another GE product or its affiliates. What a waste of money.

Nothing happened...never has. It just wont wash dishes. I have to prewash every item that is put into this piece of garbage. I bought it new and have used it for 3 years. It remained in the box the first 5 years I owned it and it honestly did me as much good in the box as it has since we installed it. It makes a good rinser but wont even wash off a lemon seed left in the bottom of a glass. This is such a joke. I would never buy another GE product. The refrigerator I bought at the same time, a side-by-side, the entire front door froze solid within 2 years and we had to buy a new one. Your company stinks. This is a rip off of my money. Refrigerators and dishwashers are not cheap. Model GSDL122F02BB is the dishwasher.

I have a GE Profile dishwasher that is only 1 1/2 years old and the control panel has stopped working 2 times. The first time, it’s under warranty and it repair took place for a couple of minutes. The second time, it’s not under warranty and they want to charge $89 just for the service call, parts and labor. Crazy. That’s a $1000-plus appliance that has already broken two times. I cant run the dishwasher on any setting except the one that it decides to choose for us. Yes, it changes whenever it feels like it. This was one of their higher end dishwashers and, to be honest, it really doesnt clean any better than a lower end one that I had at a previous home.

A small black piece of plastic, which snapped into the back of the microwave handle has bent/shrunk, and popped off. My microwave is just a little over one year old. I called the GE 1-800 phone number for parts, and GE does not offer a replacement part for this, without buying a whole new replacement handle, which costs over $160.00.

I purchased a dishwasher and it doesnt dry the dishes. It leaves the dishwasher and the dishes wet. I was told they have a fix. However, nothing has been done. If you want wet dishes, dont buy. They told me to raise my water temperature on my hot water tank and to run my sink water until it goes hot. They told me to buy Rinse Aid. Well, I did it all and it still doesnt dry. This is an energy saver appliance. Ha, ha, its because they are saving energy at our expense.

I purchase GE Profile appliances for my new home. I thought I had done my research but until I actually owned I found I feel differently. The microwave pad scratches very easy and after only a few months you can see which buttons I use the most. I’ve only used a microfibers cloth to clean and it scratched the surface. Appliance repairman said to use terry towel. Wish I’d known that. Secondly, after owning all Samsung appliances previously I now appreciate what I had. So many of the features of my past microwave are not on this GE. For example the vegetable good, built in sensory knew when vegetables were cooked. Also, soften butter and chocolate was another feature. Thaw meat knew when it was thawed. So my advise go for the Samsung microwave

I purchased the GE Caf Advantium Oven Model No. CSA1201RSS. This is supposed to be one of their top of the line Microwave/Speedcookers and at $699.00 it should be. Within the first few months with little use, it made a loud buzzing sound and it went dead as if the breaker tripped. It was under warranty and a GE tech came out and repaired it free.The problem was the Magnetron, a key component inside the unit. I was shocked to see that the Magnetron was made by LG. I bought a GE because I did not want an LG, but I ended up with a GE with LG parts. The unit worked for several months and now it will not heat anything. I have only had this unit for 13 or 14 months and it is broken for the second time. I called the 1-800-GE-CARES to learn that they do anything but care. They told me it was out of warranty, but the parts are covered.It will cost me $99.99 for the tech to come out plus the cost of labor to repair the unit, which varies based on what needs to be repaired. This is unacceptable. There is clearly something wrong with this unit. I have had microwaves last 10+ years with no issues, and one of them was a GE! I thought GE would stand behind their products better, especially since they can see I had prior problems with this unit. This is a $699.00 tin can.

Have had dishwasher for 3 years and it quit working. Had appliance repair people out 3 times and they replaced every circuit board and harness in dishwasher as per GE and still doesnt work. GE own techncians dont even know how to fix it. So I am replacing it! No more GE appliances for me!

We have a GE Profile Microwave/Oven combo unit. The paint is flaking off inside the microwave. Most of the ceiling paint is gone, and the floor of the microwave is flaking. Because we have a combo microwave and oven, the entire unit must be replaced. Thats around $2400. We cannot match the color, because they dont make bisque appliances any more. GE customer service suggests we replace the microwave with a countertop model, leaving the dead microwave on the wall. This is unacceptable.

Ive had a GE Dishwasher for over 6 years and it works great. The issue is every 2 years or so, the plastic over the metal rods that make up the plate racks wear away and rust the underlying metal. The first time GE charged me about 200.00 for the racks, where the dishwasher only cost 250.00. The second time they replaced for free and now this third time, GE is being absolutely absurd not replacing these racks. My concern for mine is the health issues arising from having rusted parts in the washer. I believe this to be a manufacturers defect and could be happening in 1000s of these dishwashers. Metal should not go into water!!! GE should gladly replace my racks but theyre giving me a major problem, like take our offer or dont bother us. Please see the attached pictures and hopefully this doesnt happen to your dishwashers.

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

The microwave is large enough for a whole chicken and operates at both a high speed and good efficiency. Most items can be timed within minutes of properly prepared meals.

It has been a remarkable machine: reliable and efficient! I have had my General Electric microwave since 2001. It has never given me one day of trouble. The size is perfect and the heating mechanism has been flawless.

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

When I entered my home I notice the microwave door was open and light was on. I closed it and took packages to my room. When I entered the kitchen I seen flames coming from inside unit. I put out flames with a fire. The panel was off and microwave was empty. My son said he left the door open because when he closed it hummed. I am very blessed that my home or loss of life did not happen. I contacted GE to see if there was a recall and was offered a 20.00 discount. I really feel that this is a hazard waiting to happen.

The first GE microwave never worked right out of the box. I took it to school and let my Physics students (I am a science teacher) tear it apart and find the trouble. The magnetron was broken. Since it could possibly have happened bringing it home, I decided to let it go and went and bought a new one. This one is less than a year old and has the very scary habit of coming on by itself. When I go in there, it says it is defrosting, or beverage, or any number of reasons. Tonight, I will unplug it, chunk it, and go buy another microwave. One can bet that I will never buy another GE product.

The new home that we purchased had the above named dishwasher (GDT655SSJSS). When I run the dishwasher there is a very high frequency whine throughout the cycle - the only time it stops is when it is changing cycles. I have contacted GE Customer service 3 times... The first time I was told to add a quart of water to the bottom of the dishwasher and that should fix the problem. Tried that - still high frequency whine. Second contact - no response. Third contact - today- called customer service after my negative appliance review was rejected by GE (buyer beware of all those positive reviews) and was told that this noise is normal. Totally Unacceptable - since the sound hurts my ears and causes a headache - I have to listen to 111 minutes of this noise (except when the washer pauses to change cycles). This is the very worst dishwasher I have ever owned and even though it is only 2 months old I will be replacing it - and it wont be a GE Dishwasher.

I bought a dishwasher 2 1/2 years ago, along with GE fridge, microwave, convection oven for my remodeled kitchen. It was less than a year old, when the dishwasher control board went. GE fixed it for no charge, as it was under warranty. They sent the part, and the repairman was great. A little over a year later, the same thing happened. It is no longer under warranty. I spoke with a supervisor about this. This dishwasher was just over 2 years old, and again, the same thing happened. They were very nice, and sent a man over, after sending the same part in the mail, and again, he was very nice, and I was called to see if everything was to my satisfaction, and it was. I was not charged. It is now a few months later, and the machine will not begin the cycle. The lights are on, blink several times, then finally go off altogether. I did the troubleshooting suggestions, including turning it off via the circuit breaker to reboot, and still nothing. I am so angry. This is a relatively new machine. I am so disgusted that I will never buy another GE appliance, and strangely, I have stock in the company. Its a small amount, but stock nonetheless. What a shame. Now, I have to spend a lot of money on a repair that I should not have to. GE charges $90 just to walk in the door. I was told the second time it would be over $200 to repair a 2 year old machine. It is not the customer support nor repairmen that I am so angry about, rather, it is the ** machine, which is not even 3 years old! The thing is, I always try my best to buy American products, even cars. Before I call in a repairman, I am going dishwasher shopping, in case I decide that it is simply not worth an over $200 repair. I will not be looking at GE.

Our dishwasher has only ever served as a dish wetter or drying rack. It has NEVER CLEANED DISHES UNLESS they were put in the dishwasher already spotless. We have a GE Slate with hidden controls. Now, the racks are rotting away and the cost to replace them is nearly the cost of the entire unit. We are going to throw this one out and get a new dishwasher of another brand. DO NOT BUY GE DISHWASHERS!

I have a GE microwave. It stated that I had a 10 year warranty on the magnetron on the computer website. Now GE says its not warranted. I have owned this microwave for a little over a year and its pile of **. All they wanted to do is sell you their products and they dont stand behind what they make anymore. Nothing is made to last in this time and age. I will never buy GE products from Home Depot again.

GE Dishwasher GDF520PGJBB - GE has the worst dish washer machines you can ever buy. In fact never buy a GE dishwasher in general. Maybe, GE makes good refrigerators but not dish washers. We bought this from Home Depot and after 6 months it collapsed: Pump broken, soap dispenser broken, panel doesnt work. We had before a Maytag and we used it for over 20 years without any issues. In addition, GE has the worst customer service you can imagine. They are robots, repeat the same thing with a very annoying tone, and are not able to solve a single issue. We were even harassed by GE manager Evan or Aven, useless man, from customer relation who enjoyed seeing how much frustrated we were. This was the only GE appliance we have in our house, and after this unpleasant experience with GE will NEVER buy any GE appliance, even if it was free. GE refused to fix our machine under the pretext that its not installed on Ply Wood. We didnt install the machine ourselves but professional technicians from Home Depot and they also refuse to put PlyWood under the machine as its not a requirement. They do it every day, but looks like GE have Lazy technicians.

I am very satisfied with my GE microwave. It has more features than other models. The price was reasonable and just the right size for my family. Its quality is way above the other brands that I have owned.

I have a microwave that has a rack inside which gives you options other than using the rotating plate inside. Overall it works quite well. I did not purchase this microwave, it came with the apartment. Not sure if I would purchase this brand if I were to buy it for my own home.

I recently had a service tech out to repair my dishwasher. Before I knew it, he was opening the unit and found a tube looking piece stuck in the unit. He was at my house for 15 minutes and the bill was over $250. He should have asked if I was okay with the procedure he was going to perform and the cost before proceeding. To make matters worse, the dishwasher is not cleaning dishes now. I sent a prior email to GE a couple of weeks ago with no response. I would have never spent this money if I had been given the option and certainly now I have been charged for a repair that actually made my unit worse than before since it is not cleaning the dishes like it did before the repair. I respectfully requested that my money be refunded and/or be given a credit towards the purchase of a GE appliance and have received no response. I tried calling and have been on hold for over 30 minutes now with no one picking up, despite the fact that hold time stated estimated wait time was 5 minutes.

My GE DVM5140DN1BB Serial # ZS 902371B manufactured in December 2009 has stopped functioning. It looks and sounds like it is working but it will not heat. GE only guarantees their warranty for 1 year after the date of purchase. This should have been my first clue. For a fee, they will come look at it.Growing up we had an Amana Radar Range. My mom bought it in 1987. I replaced it so that I could save counter space and also that it would match my other kitchen appliances. I bought the GE microwave in May 2010. This product lasted for a total of 16 months. Ridiculous! In my opinion, big business companies no longer have to be held accountable for producing bad products. Money was lost but will never again be spent on a GE product.

We moved into a new home in June of 2011 with the appliances already included. Ours came equipped with a GE, over-the-range microwave, model JVM1540DP1WW, manufactured in Malaysia, in April of 2010. Within several months, the revolving platter began to make a bumping noise while turning and then it eventually quit turning altogether. Five service calls later, we had the platter motor replaced, circuit board and four fan motors (apparently the platter has voltage supplied from that fan to make it run) and it still didnt work.It was taken back to the shop and eventually the problem was traced to a loose wire on a terminal connector. After a month of operation, it is again beginning to make the bumping noise while the platter turns. To top it off, Consumer Reports (the March issue) deals with problematic microwaves, especially the GE model and the unexpected fires that can occur. In addition, they can be susceptible to (not always however and only on certain models) wireless transmissions which could potentially cause them to start on their own. I know for a fact that it knocks off my XM Satellite Radio when it is running. Bottom line...its history and will be replaced with a check rated appliance before I too have a major problem.

I purchased a GE Profile stocks in 2007 and a GE microwave model JVM7195SK1SS purchased 12/30/16. We have replaced the knobs on the stove 2 times because of peeling in the past. Now we need to replace the microwave handle. The handles and knobs look like metal but they are cheaply made white plastic covered with a sharp silver coating that peels. It appears the knobs get overheated when the oven opens and the microwave handle from the steam when cooking on the stove. Last night I cut my hand on the handle! We reordered the faulty handle and now getting charge $100 from GE. The company should take responsibility for their poor design and replace it for free with a nonpeeling part. I know that we will get the same handle and won’t be able to use the burner below or hope that using the fan will keep it from cracking again. I would never recommend a GE product again.