I bought a GE PEB7227 Profile Microwave and after 6 months the door latch breaks. Service tech comes and says, Sorry parts are back ordered for 3 months (including new frame due to damage done to it getting the thing open). I call GE customer care. Explain that its obviously cheaper to drop ship me a new unit (and I will waive the new frame) than all of the parts, frame and a second call to fix the unit. Their answer, buy a new unit at a discount or simply go without a microwave for 3 months. Add me to the list of victims trying to warn others to NEVER buy a GE product.

Have a GE over the range microwave oven, MODEL PVM1870DM3CC which started turning itself on for 6 minutes, repeatedly, WITHOUT being touched!

I purchased a newly built home which had all GE appliances in the kitchen. After 2 years and 5 months, the microwave no longer heats the food. I had a 3rd party appliance repairman come to do a diagnostic evaluation. He informed me that the magnetron has gone bad. To have this repaired would be the same price as purchasing a new microwave. He also informed me that the magnetron should never go bad in such a short amount of time. I contact GE and my warranty was for 2 year so the best they can offer is a $75 good will certificate. What this means is I have to purchase a new microwave and send in proof of purchase and in 4-8 week, GE will send me a $75 rebate check.I am disappointed in the GE product. Their products are now made in Asia (my microwave says made in Malaysia) for cheap labor and the quality has gone down. What is worse is that they do not stand by their product. The fact that something as serious as the magnetron went out in less than 3 years is a red flag that it was not assembled correctly. The microwave is listed at over $500. I would have been happy with GE even paying half but $75 will not even cover the cost for shipping and installation. I am very disappointed.

Remodeled our kitchen back 6-7 years ago and bought GE Profile appliances from Home Depot... bad mistake. The microwave/convection oven came as one unit and now due to paint peeling on the microwave interior - inside top and sides we need to replace the entire unit to the tune of $2,500 plus. I called Home Depot and asked if there was a government mandated recall on the item... and they asked if we purchased the extended warranty. What? Does anyone know of a recall or class action suit on the following item: GE Profile Model: PT970SMISS. Manufactured December 2007.

PDT845SMJES - I purchased the entire GE Profile series when we remodeled our kitchen in October 2016. The first time I started the dishwasher, it leaked out the bottom of the door. The store where I purchased it sent out a plumber who discovered the soap dispenser was missing the seal. Took a week to order and replace the seal. Worked fine for 5 weeks. Then, on December 17, 2016, it quit mid cycle and I got the leak detected error message. Now I am in dishwasher hell. The store where I bought it said they were too busy to come and check it, so they told me to call GEs customer service number. GE sent out a plumber from Iowa (I live in SD). He removed the bottom panel, to look underneath and decided it needed a new pump and also a new soap dispenser part. That was on back order, so I had to wait until January 11, 2017 for him to come back. When he pulled out the dishwasher to replace the pump, he discovered the tub was leaking along the left side. He said the unit could not be fixed and suggested I call the store where I originally purchased it. They agreed the unit could not be fixed and contacted GE and got me a case number and said GE would call me by the end of the week. Im still waiting for that call. Do NOT buy this model GE dishwasher. GE apparently doesnt stand behind its products and the stores that sell GE are helpless to do anything for you.

This is the second digital microwave I have owned. Both of them have been GE brand. There is nothing fancy about them but they are very Easy to use and get the job done. The first unit lasted about 15 years before it had to be replaced. It was used almost on a daily basis, so I feel I got my money’s worth from the unit!

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

This is one hell of a dish washing machine. You really need to think about getting in on this thing at the ground level. You put the dishes in dirty and they come clean! Holy**!

I bought this over the range microwave in 2009 to go with my other Cafe appliances (dishwasher and range). After a few months, it stopped working and ge sent a repairman to fix it under warranty. He took it apart, replaced the touchpad panel, but told me that the old panel was still good and that I could keep it for the future in case I needed it. And I did. It stopped working a year ago. I took the whole machine apart, put in the original touchpad, and it worked. Until about a week ago. I went away on the Fourth, and when I returned 3 days later, I had the same problem for the third time. I just called ge service and was told that the replacement for the touchpad is $600. When I started to say that I could buy two Microwaves for that amount, the ge service person cut me off and asked if she could help me with anything else. Rude. In addition to this, the Cafe Range ($3000) has three unusable knobs because they were made of cheap PLASTIC and are cracked.They just spin and turn nothing on. When the third one broke, my wife had turned on the power boil and was unable to turn it off until I came home 2 hrs later. A huge FIRE HAZARD!! To replace the six knobs is, you guessed it, $300. I could buy an inexpensive stove for that. I have purposely used ge in lower letters because that is the way I feel about their appliances and their service.

I notice when cleaning the inside of the microwave that the coating on the top (ceiling) of the microwave has bubbled and cracked and there is a hole in the interior top coating. This unit is about 9 years old, and is a dual unit as the bottom is a convection oven with very little use. Im told I need to replace the microwave. I have never seen bubbled and cracked interior in many years of owning and using this type of appliance. The photo shows the defects in the lining coating. Im really upset about this.

I purchased a GE microwave about 5 yrs. ago. Got it on sales from Lowes. I love it. And it has been moved several times. And I have had no problems with it. It is easy to use and quite nice to look at. I would greatly recommend this product if youre looking to replace the one you have.

The protective lining inside the microwave is coming off in a number of areas and the metal is visible and rusted. Is it hazardous to use the oven which is otherwise working? I contacted the Consumer relations department of GE and was told that its not repairable and offered only $25 as rebate to buy another one from them or any other retail store. I visited a couple of merchants, online and in their store, shopping for a similar product and got a price range between $250-450 plus $110 installation fee for a similar OTC microwave oven. We have all other appliances at home from GE and this does not give a good confidence about the products from GE.

We recently purchased three GE Profile stainless steel appliances for our new home. The total was somewhere around $3500. Within two weeks our $1000 dishwasher would not work. It took FOUR service calls and THREE weeks for it to finally be repaired. Now our $2000 oven (traditional/convection) has stopped working and the oven light will not go off without us tripping the breaker. Service tech not available for 5 days. I am expecting the new micro to go out any day now. All of these appliances are less than two months old. We had GE builder grade appliances in our previous home that are still running strong after 16 years. That is the reason we went with GE again. However, after the above mentioned issues with our new GE appliances, I encourage anybody who reads this to NEVER, EVER BUY ANY GE PRODUCTS AGAIN.

This dishwasher was provided in our new manufactured home. It is the cheapest and loudest dishwasher I have ever had. But to be fair, I didnt pick it out. My friend just bought a new Bosch dishwasher and returned it because it didnt come with a heating element! Make sure (with the new energy saver models) that it comes with a heating element! Spots all over her glasses!

I have had it with GE! Only 18 months after install, my beautiful, stainless, three-rack, GE, top-dollar dishwasher will not turn on. Repair attempts have been futile. Tech said not to expect more than seven years service out of new appliances. Were tossing this junk and buying CHEAP replacements going forward since all we have to choose from is throw away products. OEMs like GE should realize they are shooting themselves in the foot with their planned obsolescence business plan.

My husband purchased a General Electric Dishwasher from Badcock Home Furnishings in Gainesville Florida as a surprise for me in 2016. I have owned four houses and five dishwashers previously to owning this General Electric Dishwasher. None of my other dishwashers were by General Electric and worked fine. This General Electric Dishwasher is by far the worst dishwasher I have ever used in my life. It does not clean dishes no matter how well you stack the machine with your dirty dishes and utensils. I can always count on having to rewash at least 10 dishes and or utensils for each load that I wash in this dishwasher. Also, the detergent dispenser does not empty completely.

I have a built in model that is now 9 yrs old and still operates as well as the day I bought it! I will definitely buy GE again. I have family members that have owned 2-3 microwaves to my one, that screams quality.

We installed a GE Spacemaker Microwave Oven /Range Hood in 2005. We used it mainly for the overhead light over the range, the timer, the vent fan, and only occasionally to microwave vegetables. On 8/5/2011, I put a dish of eggplant in a glass dish to heat up and the microwave shut down completely to the point that I had to check the circuit breaker to see if the switch was shut off. The microwave and everything associated with it is dead.

In January 2013, my husband and I purchased new appliances from Home Depot, including the above referenced dishwasher. The first dishwasher was delivered broken. The display panel was detached from the body of the dishwasher. At that point, I was concerned about the quality of the product. From the way it was detached, it appeared to be very cheaply made. (It was also installed incorrectly, causing a leak under our sink and ruining the bottom of our cabinetry. We settled this with Home Depot, but I include this detail to help emphasize my frustration over this whole situation.)When I contacted Home Depot about the faulty product, they agreed to provide a replacement, so I decided to give it another try. I wish now that I had simply returned the product and purchased another brand. Upon receiving the new dishwasher, I noticed immediately that the edge of the inner rack was scratched so badly that the plastic coating was gone, and rust had already begun to appear. I had to call customer service and get replacement racks. (More on this to follow.) Allow me to detail our service call records:Call #1. Heat dry didnt work at all. The technician told me that I needed to run the water in the sink and make sure it was very hot before running the dishwasher, and he changed the settings. This created a slight improvement, but not much.Call #2. Soon after, detergent tabs started to get stuck in the dispenser cups. I was using the exact brand recommended in the manual. The technician told me that detergent tabs were just the worst, and that I should try gel detergent, even though this is contrary to what the manual states. The detergent ruined my silverware, and I have had to purchase a new set, which I now hand wash.Call #3. Using gel detergent did not work. Technician came back, and told me the wrong replacement racks were sent. That must be what was blocking the water from getting to the soap. He ordered another replacement rack. He brought a plastic door, watched the water, and told me the upper arm wasnt spinning fast enough. He made an adjustment and claimed to fix that.Call #4. Detergent still not emptying from the cup. A different technician came back and used the plastic door. He found a different problem, but did not have the parts to fix it, so, another service call had to be scheduled.Call #5. Technician comes back, and finally fixes the detergent cup problem. For now.Call #6. Heat dry now does not work at all. There is so much water on the dishes that I have to hand dry them, and afterward, I have to mop my floor. There is just a massive amount of water in the dishwasher. In addition, it will not start except on a one-hour delay. Pushing the delay button does nothing to change the settings, and does not allow me to scroll through like it should. This appointment is scheduled for today, but I am not hopeful that anything will change.At this point, I have no faith that this dishwasher will ever work. Customer service did extend my warranty for six months, but that is the only concession I have gotten from them. That extension will expire soon, and I fear that at that point I will simply have to spend another $600 on a new dishwasher and leave this one on the curb. Its unacceptable for any consumer to have to purchase a new dishwasher less than two years after purchasing from GE.

Great microwave I have had for almost 10 years. It works like new. Its a name you can trust and not expensive at all. I have always believed in the GE name and their products. I have a dishwasher and dryer that work just as well. I will continue to buy GE products.

I purchased this product in June 2011 for a summer weekend getaway home. I used it 5 times during that summer. The following summer I didnt use it at all. Summer 2013, I used it and everything seemed fine. That night I heard something and the microwave turned on by itself! Thank goodness I was at the house. I cannot believe this unit has not been recalled yet, as I see other consumers are complaining about the same thing. I keep the unit unplugged all the time. What recourse do I have as a consumer? I have my bill of sale and paid good money for this unit.

I bought a dishwasher 2 1/2 years ago, along with GE fridge, microwave, convection oven for my remodeled kitchen. It was less than a year old, when the dishwasher control board went. GE fixed it for no charge, as it was under warranty. They sent the part, and the repairman was great. A little over a year later, the same thing happened. It is no longer under warranty. I spoke with a supervisor about this. This dishwasher was just over 2 years old, and again, the same thing happened. They were very nice, and sent a man over, after sending the same part in the mail, and again, he was very nice, and I was called to see if everything was to my satisfaction, and it was. I was not charged. It is now a few months later, and the machine will not begin the cycle. The lights are on, blink several times, then finally go off altogether. I did the troubleshooting suggestions, including turning it off via the circuit breaker to reboot, and still nothing. I am so angry. This is a relatively new machine. I am so disgusted that I will never buy another GE appliance, and strangely, I have stock in the company. Its a small amount, but stock nonetheless. What a shame. Now, I have to spend a lot of money on a repair that I should not have to. GE charges $90 just to walk in the door. I was told the second time it would be over $200 to repair a 2 year old machine. It is not the customer support nor repairmen that I am so angry about, rather, it is the ** machine, which is not even 3 years old! The thing is, I always try my best to buy American products, even cars. Before I call in a repairman, I am going dishwasher shopping, in case I decide that it is simply not worth an over $200 repair. I will not be looking at GE.

Have been trying to have repairs for new appliances less than year old since before May 20th. Have had cancelled appointments, service never showed, wrong parts etc. Went to consumer advocates for help, no help. Today my appointment was again cancelled and rescheduled to July 10th. About to have a stroke. Both ice makers dont work, yet I am not put ahead. Have to go back in line after GE cancels.Purchased microwave, double oven profile appliances, two dishwashers for which gasket fell off and dispenser for soap leaked, french door refrigerators, all stainless steel. I just got off phone with consumer advocates and again was told next date July 10th. And I do want an attorney to contact me. Thank you and I hope I get a response.

My dishwasher is probably 15-20 years old. It only is run about once a week but is still holding up. Does a pretty good job of cleaning but I do a pretty thorough wipe down before loading. Great value for the money. Hope you get a stainless steel version some day.

I have a GE dishwasher that shut itself off after three uses. It was rebooted by a repairman, and worked once. GE repairman called to let me know and I was originally scheduled for today but have been canceled. I’m taking the day off but for nothing. There’s no number to call. There’s no one to complain to. JCPenney is not standing by their merchandise because I did not buy an extended warranty. Originally purchased in November 2017. The machine was replaced by GE in December 2017. I have a dishwasher that I paid over $500 for and I’ve used it four times.

Bought a PDT845SSJ2SS in June. Two months later, it has a leak. Good news, has a leak detector which shuts down the machine. Bad news is that it leaks and the leak detector worked! Called GE. We dont have an authorized service technician in your area. We will get back to you within 3-5 days. Three days later, after I had raised rain with my appliance dealer, he arranged for a local dealer to come look at the machine. Scheduled that appointment - it was Friday, and We only come to your area on Tuesdays and Thursdays. Next Tuesday is booked, so we will try for Friday. Then, someone from an organization called Platinum Services calls and says GE has assigned the ticket to them. Shes going to try to schedule a diagnostic appointment in the next 7-10 BUSINESS days. Told her to forget it (found out she was calling from Lowes and had to find a technician before she could schedule.) End of week 1. Following week, someone else from GE calls and asks if I was cancelling my service request. In the course of the conversation, she asks to confirm the model GE RANGE that I have. Kinda lost it on her... On Thursday serviceman from local dealer comes. Turns on the dishwasher - it leaks exactly where I had said it would. Need to order a part and GE will not expedite. End of week 2. Next week - crickets. Nothing, Nada, mushroom mode (in the dark and being fed BS). Called my appliance dealer today and told him to come pick up the dishwasher - says he cannot do that. I explained, “I will forfeit the money I paid - I dont want a dishwasher that leaks in the first two months of use.” He tell me GE released the part yesterday...whatever THAT means and he HOPES repairman will come next Tuesday to repair. So, I have had a new GE dishwasher for 3 months and it has only worked for 2. Be aware! I assume partial responsibility for this goat rope - I faithfully refer to Consumer Reports when purchasing appliances and electronics. I suggest you do the same... you will find GE listed AFTER BOSCH, KITCHENAID, KENMORE and others. Also, realize the GE brand is now a CHINESE company. Caveat Emptor!

We have a GE Advantium Microwave. It is our second model (we moved and left the first one behind). It is spacious, has an intuitive menu system, cooks extremely well, also includes a convection oven feature that we use to great advantage. The nicest microwave weve ever used (and weve used plenty of them).

When you use the vent fan it is very loud even in the low position. I would also like to see a brighter bulb under the microwave. I dont have much more to say except that the oven functions well otherwise.

GE Profile dishwasher - model # PWD8280N00SS - Appears that moisture got between the exterior panel and door that houses that main board. Because of the moisture caused a short that melted the main board, with harness and the ribbon from the on/off panel that connects into the main board. Luckily I was home at the time or this could have caused a significant fire damage in my kitchen.

After only 4 hours of installation, the microwave turned on and the fan and light came on. It was not cooking anything. Inside of microwave was hot and I could smell a burnt electronics smell. I unplugged it, waited a few minutes, and when I plugged it in, it started up again. The LCD screen was scrambled, all lit up. Opening the door stopped the unit, but it started again when I plugged it in.

I bought a GE Adora dishwasher from Home Depot. There is nothing technically wrong with it - in other words - it is not malfunctioning. It is just that its normal operation is AWFUL, in my opinion. The PROS: it is very quiet. The CONS: it does not clean your dishes! And since this is the primary function of a dishwasher - I would say it is a complete failure. Originally, I had hard water, and I thought that was probably the issue. I purchased a whole home Kinetico system, which remove almost all particulates from the water, and makes bottled-water-quality drinking water. (On a side-note, I would TOTALLY recommend the Kinetico system!) But even after having the water issues fixed, the dishwasher has NEVER worked properly. I have used every type of dishwasher detergent, including Cascade Complete & Platinum, Finish Ultra & Quantum Powerball... and I have also added rinse agents etc. Basically - whatever state your dishes are in when you put them IN the dishwasher, they will only be slightly improved when you remove them. Even if you SOAK the dishes first, they come out with all kinds of residue. It does an especially horrible job on glassware, but silverware is also terrible. And I have to re-wash by hand every coffee cup that comes out. I truly loathe this machine, and will replace as soon as I do enough research about a better brand & model.

Dishwasher has been running 3 hours and it still has not finished. It is the loudest dish washer I have ever owned and this is the 5th house I have owned. To top it off I just paid $270.00 for a GE professional to come to our house to troubleshoot our problems and it fix the issues. Guess what, problem not fixed and GE has my hard earned money. Thanks, GE.

My GE over the range Microwave has broken about 4 times in a years time. My warranty company American Home Shield (AHS) has decided that instead of replacing this piece of garbage, its somehow worth it to keep on fixing it, which is apparently their MO for all their customers but I digress. After the latest breakdown (microwave lost power completely), I was referred by AHS to GE Appliance repair. Thus began the nightmare. The tech that showed up was incompetent at best. He showed up, looked at me, made a grouchy face and proceeded to walk in the kitchen with an attitude like he was doing us this massive favor. He opened the microwave door, closed it, opened his computer and ordered 10 (yes 10) different part. Again, he literally just opened and closed the door - did not disassemble to see what part was actually messed up. No diagnosis done of any kind. He scheduled to come out the week after that - didnt show up because I missed his phone call. Btw, I called him back pretty immediately and he didnt pick up. After being on hold for about 35 mins (which is clearly the GE standard hold time), they tell me the guy has left the area and they need to reschedule me for a week later. The day before the 2nd appointment, they called to reconfirm and then the morning of, I called, stayed on the standard 35-40 min hold and reconfirmed he was still coming and was told he was on his way. Well, the appointment time came and went and he failed to show up YET again so I called to ask wtf happened. They said he didnt come because I canceled the appointment thru an automated call. This time the idiot didnt call me like they always do. I asked for proof of this alleged automated call that was placed to me and they said no call record exist and so while it seemed like a system glitch, the tech already left the area and theyd need to reschedule it. I told them, No, thank you. Got a local repair company to come out the very next day. Turns out, out of the 10 parts that idiot tech had ordered, only 4 had arrived while the invoice still showed 10 being shipped. Let me clarify this: All these issues stem from GEs entire company: From manufacturing crappy products to HR hiring incompetent techs to customer service being absolutely nightmarish to supply chain not sending parts that are being ordered. And if you can somehow get their alleged consumer advocate department on the phone after a 40 min hold time, they dont give a crap either. All these employees MUST hate GE to drive customers away as far as possible. I own a business and I will never ever EVER buy GE again.

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

GE Cafe Series dishwasher model # CDW9380N20SS is a fire hazard. Three days ago, our GE Cafe Series dishwasher nearly caused a fire. If I had not been home that day, it surely would have. I ran the dishwasher as usual and went about my day several hours later. I detected a strange acrid smell and with my five-year-old who was ill and at home that day, discovered the dishwasher door was burning hot to the touch. I needed a potholder to open the door. Once opened, there was a blast of heat and smoke. I needed to use oven mitts to protect my hands from the heat to pull the racks out and handle the dishes. The heating element did not deactivate at the end of the cycle.If I had not been at home, the house would have been destroyed as all the plastic items on the top rack in the dishwasher melted. In addition the plastic parts of the lower rack, the wheels and their clips; the silverware holder; covers; the clips that hold the pot tins in place were destroyed, to the point that the majority of our silverware was coated with plastic. The plastic on the lower water dispenser has been demolished; it completely melted more than 50% of the plastic covering on the arm and is charred and burned. We are so lucky to still have a home!The door must be kept open. When the door is closed, the element super heats and presents a major fire hazard. We have noticed that there is a recall for similar models with plastic tubs, but ours has a stainless tub. GE needs to broaden the recall to include all these models. This is a serious issue that needs to be addressed immediately. Our GE Cafe Series dishwasher model #CDW9380N20SS was installed on October 1, 2008. I would not be surprised to find that parts from the recall in April 2008 were also used in the Cafe Series. I have discovered in the few days since the DW units malfunction that there are over 1000 complaints listed with similar, even identical complaints, on multiple internet sites with the same problems.

Three nights ago, I loaded my GE Profile Dishwasher, model # PDW9880L00SS and began the wash cycle. The wash cycle completed and I went off to bed leaving it on the dry cycle. The next morning I smelled a burning smell but did not know where it was coming from in my home. A few hours later, my husband began searching all of the appliances in our home to see what the burning smell was. When he opened the dishwasher smoke came out of it and everything in it was completely burned. Apparently the drying mechanism never turned off after the wash cycle or it turned itself back on only on the dry cycle. I dont know. But I know one thing for sure, we are lucky that my husband was home because I left and if he wasnt there, Im positive that the dishwasher would have caught on fire causing severe damage to our home. I will never purchase a GE appliance again. Note, I also have problems with my GE refrigerator and my GE Profile microwave and our dryer. Weve had to replace the dryer and the microwave and weve repaired the refrigerator. I have a repair person coming out to see if the dishwasher is repairable, but I dont think it will be. This is terrible.

I have two of these in my kitchen, just about 3 years old. They have NEVER dried the dishes and I have ALWAYS had to thoroughly wash the dishes because otherwise they dont get clean. One has completely quit working now.

I purchased the unit just over a year ago and it started beeping one night with error scroll speed and then key pad shorted. In the end to repair costs more than to replace, even though it is above stove mounted unit. Do not buy a GE Microwave. Especially model # JVM6172DF1WW.

Dishwasher looks and works beautifully. It is slate black and I have never had to redo any dish or glass. It is located. About 12’ from our bedroom door and we turn in on before go to bed. It is so quiet that we never have our sleep disturbed.

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

I purchased a GE Profile stocks in 2007 and a GE microwave model JVM7195SK1SS purchased 12/30/16. We have replaced the knobs on the stove 2 times because of peeling in the past. Now we need to replace the microwave handle. The handles and knobs look like metal but they are cheaply made white plastic covered with a sharp silver coating that peels. It appears the knobs get overheated when the oven opens and the microwave handle from the steam when cooking on the stove. Last night I cut my hand on the handle! We reordered the faulty handle and now getting charge $100 from GE. The company should take responsibility for their poor design and replace it for free with a nonpeeling part. I know that we will get the same handle and won’t be able to use the burner below or hope that using the fan will keep it from cracking again. I would never recommend a GE product again.

We have a GE Profile Microwave (PNM1871SM3SS) that is only 3 years old and is reporting KEYPAD SHORTED - SERVICE MAY BE REQUIRED. We called GE service repair and told them the exact message. The service guy shows up and says all he has in his order is General other service needed and that he doesnt have the keypad panel. Gives us an estimate of $501 to repair it. Tells us a new one costs $400 and with a coupon he can give us it will be $100 less. We were charged $99 for this visit which basically lasted 10 minutes (way to go GE on making money off faulty devices you sell). The service-person also told us that the average life was 10 years for these, but this one crapped out in 3. He said if we get another GE microwave, it will fit right in there and that I can do it myself if I am handy but after reading all the reviews online, I am skeptical whether I should get a GE microwave again or not!

I wish I had seen this site first. I purchased a dishwasher. It didnt even make it 6 months. Took a month to fix and then 3 months later broke right before Thanksgiving. It is now Friday before Christmas still not fixed. GE is closed. The repairman and GE both lie and said it would be fixed before Christmas. Do not purchase anything GE. They do not stand behind their products. The products are poorly made and dont last. Ive had several dishwashers over the years. This is the first GE and it will be the last. You will have to wait over an hour for on hold to reach anyone and even then they just dont care. Save your money. Buy a didnt brand.

Dishes on top shelf do not get clean, and Power Dry does not dry dishes. Technicians say nothing is wrong with the unit and customer service was a nightmare.

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

I bought a GE microwave two years ago. The microwave stopped working and has a message that the keyboard shorted. I called GE and they are charging me $90 to send a technician, plus parts and labor. I paid $250 plus installation for the microwave. I will never buy GE products in my life. Do not recommend to anyone.

My GE dishwasher has clean all my dishes. Not leaving a run or mist on no dish. I can set the time on when I want my dishes washed. The programming is out of this world! The cost is a great easy and inexpensive cost. My wife was very happy with the purchase. The buttons are not too big. Its very digital timing.

Purchased a GE Profile (oven and microwave unit) for over $3000.00 seven years ago. The protective coating on the interior of the microwave completely wore off down to the metal under the wheels of the turntable. GE calls this minor chipping (which it is not), advises to stop using the product, and offers a $100.00 off a new GE unit because they cannot fix it. The product should be recalled, just like Honda did when their Pilots were peeling.

Have a GE dishwasher put into operation June 2016 (new home). In Oct 2016 we noticed a leak and a serviceman came out and identified a loose soap dispenser - tightened it. Next time we used it, leaked as before. Same serviceman came again, this time replaced both the main seal & spinning water distribution wand assembly. Again, the unit leaked and on Dec 14th same serviceman replaced the soap dispenser. Before he got too far down the road, we called as the unit again leaked. He blamed it on excessive soap suds - which he removed manually. Following his departure, we again experienced a leak. Same serviceman returned on Dec 15th. After review, he advised us the DW would be replaced and we should get a call within 48 hrs to arrange. On Dec 17th (still no followup from GE) the DW leaked again - we video this time. On Dec 19th called customer relations and after much discussion it was apparent GE has NO CLUE what the heck they are doing. ONE MORE repair trip was scheduled - this time they would replace the inside and outside panel! We are fortunate to be retired otherwise this repair process would have cost us about $2000 so far! How idiotic is GE?? How much have they spent to avoid replacing this unit? Believe me this is the LAST GE appliance we buy from them. Dont know how they stay in business. We are awaiting the panel repair guy as of this writing. Will update once this service has been completed.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

It works well. We like this newer GE Profile with many preset buttons such as for different times and food types, and defrost. The last GE Profile MW we got had a knob that got loose right away and hard to use, like a dial-up AOL, so this upgraded model is much more convenient. I like the bigger plate size, and that the turntable can be turned off if we put a rectangular casserole dish in there.

I purchased the GE Cafe dishwasher in March 2010. Starting in January 2012, some of the keypad options stopped working. Then in April 2012, the keypad stopped working completely and I could no longer get it to turn on. I did call GE for repair. When the repair person was out to fix it, they said that this model has a design flaw. It was originally designed to sit 1 below the countertop so that the heat could release without shorting out the keypad. However, that would require a person to somehow raise their entire counter or fit the dishwasher below the floor somehow. GE was aware of the problem but decided to ignore the problem. That means that even though my keypad was replaced, the same problem will occur again and again no matter how many times the keypad is replaced. I paid over $1400 for this model, and the labor charges alone cost me $200 for the repair. I think it is absolutely despicable that such a large company has allowed a high-priced, defective product to go out into the market, knowing that a major malfunction will occur out of warranty in such a short period of time.

I purchased this in Feb. 2013. Just before the 1 year warranty was up the control panel went out. They came and replaced it. Now just a little over a year of the replacement, the control panel went out again. Worst microwave hood fan Ive ever had.

I own a GE turntable microwave. Ive had it for over 10 years and it is still going strong. I purchased it because of the capacity, the color, the wattage and features. The wattage in this microwave is amazing. It doesnt take long for things to heat up. I highly recommend this brand because it is so durable and the wattage it has. The features on the microwave are easy to access and has more features than I normally use. To have this microwave for so long and its still works just like I purchased it yesterday. Great job GE for providing an excellent product.

This GE CVM2072SM1SS Microwave (over-range model) worked fine for five years. Then, we discovered the plastic film over the touchscreen starting to peel. After a bit of wrangling with Consumer Relations, they sent me a replacement touchscreen. The LCD didnt display properly, so they sent me another one. It worked for three months, then in the middle of programming to reheat some food, we got the following error message: Control Fault, Shorted touchscreen - F10. The control has detected a shorted touchscreen and has shut off the oven. It may still be possible to use the oven. However, if this message continues to appear, your oven will require service.The only way to clear the message was to unplug the unit. No amount of replugging in cleared the message. I called GE and they said they would replace the entire unit with a new model under some program they had. Sounded fine to me. I left the house. When I returned, I received a message that their representative called back to say they would not replace the unit, since the program had expired. Huh? I called again, and after a bunch more wrangling, they agreed to send a service tech out and replace whatever needed replacing or fixing at no charge. Of course, they never really made a notation of that, so when he got here, he had to get on the phone and sort it out. Finally, he replaced the touchscreen. Lets see how long it lasts this time.

I have had a fridge, a washer and a microwave oven from GE. I have been so disappointed in all three, but the microwave oven disappointed me the most. The door broke around the handle and the hinges, and was replaced shortly after buying it. Then it broke again and I replaced it myself. Then it broke again. This makes me not want to try another GE product. The fridge shelves all broke because they were plastic. The washer fell apart shortly after a year. It is just myself and my husband using them, so they should last for years. When you buy large item, you would like them to last a long while.

Our microwave caught fire today and burned our kitchen, stove top, & attic. According to the Fire Captain, the cause of the fire was the GE microwave panel shorting out. Had my mom not been standing right there as it happened, our entire house would have surely been a loss.

I also have a GE Profile dishwasher with malfunctioning wheels. I read this site, and was comforted and enraged that I was not alone with my melting wheels. I sent GE customer service a note, explaining my problem. I also included a link to this site in my note. I explained that I was a loyal GE customer and that they should stand behind their products although my unit was no longer covered under warranty and did not qualify for the recall. GE responded to my e-mail with in 12 hours. They sent me a complete set of new wheels for my bottom rack free of charge, and sent out a technician to install them, again free of charge. They also e-mailed me to make sure I was happy and no longer had concerns. I am thrilled with my experience. Let me say that again I e-mailed GE and within 8 days (a holiday included), I had new wheels and a technician to install them at no charge.

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

I just moved into a senior Community and the GE Dishwasher was already here. I moved from a condo that also came with a dishwasher, a GE, new. It was builder grade and I hated it. But I am really enjoying my GE in my apartment! This one cleans very well and is quiet. I like it a lot.

Figure it out GE! The sixth motor and mode selector for our washer has been reluctantly ordered by a tech this morning. The second motor was installed months after buying the brand new machine. Now, only two months since the fifth motor and mode selector was installed (Dec 2, 2011), the wiring harness is burnt up. The tech recommends replacement of the washer by GE, but only gets push-back from GE. This newest incident included a horrific smell of smoke. I do not trust this machine. I have a wife and child to protect. Think about it - do the math - add your costs for repeated repairs. You do not get to be a company the size of GE by not understanding simple economics. Open your eyes and replace our washer.

Bought a new GE microwave cafe series in May 2014. Within one month the handle which was not stainless steel started to peel and cut my wifes hand. GE sent a replacement new door for the unit that did not close. Then he had to transplant the handle from the new door to the old door. A month later the unit failed. A new replacement unit took 2 months to replace. It has worked 3-4 weeks and has also now totally failed. Our experience with GE CAFE microwave and GE service process is poor to miserable. I would not recommend this product or their service to anyone.

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

I like microwaves to a point. If my wife puts my dinner the refrigerator and I take it out and put it into the microwave if the dinner has let’s say pork chops, mashed potatoes, peas everything gets cooked except the mashed potatoes. They’re always cold and sometimes the peas will pop. There’s never a good medium for all foods at once and if you have any bread or biscuits you have to take it out after 15 seconds. The same goes with turkey cranberry stuffing and other things that go on the plate at Thanksgiving. Some stuff gets very hot. Some stuff stays cold.

GE had recalls on models 8500 and 8700 due to the motor catching fire but not my 8600 which is right in between. So besides it being the worst working dishwasher weve owned by not even cleaning well, the unit catches fire and almost burns my house down and GE wants to give me a credit toward buying another fire trap as opposed to replacing it because its 5 years old. I expect appliances to last more than 5 years and not catch on fire. No more GEs for me!

Purchased new GE dishwasher after previous model lasted over 11 years. Family eats most meals and home and typically runs washer at least 4 times per week. New model was upgrade with stainless steel interior and all the efficiency upgrades from technology advances. Ran great for first 18 months then suddenly we opened one morning and notices water standing in bottom of machine. Emptied dishes, re-ran with same result. Technician called and spent an hour diagnosing to determine water pump, control board and wash motor would all need to be replaced at a cost of nearly $600 or 75% of what we paid for the unit new less than 2 years ago. Simply unacceptable that GE would produce such an unreliable product. We will be replacing with a different brand and would tell anyone to avoid GE dishwashers.

While the microwave works fine, as far as microwaves go; it does heat unevenly but eventually gets the job done, the interior is cracked and shows signs of rust and deterioration. I dont remember ever seeing this on in previously owned microwaves. I would only use it for basic heating and reheating.

I have an above the range GE microwave oven, model no. JVM1750M1CC. It has been in service for about 9 years. About 6 months ago it stopped working with an F3 code. The code claims the control panel needs to be replaced. I found that the price of the control panel was over $100 and the service call was at least $100. A little shopping around and I found I can purchase a new oven for about the same price. As the control panel is located just above the largest burner where water is usually heated to a boil, it receives a lot of steam. I visited a local church second hand store and purchased a countertop microwave and used it while I found a good solution. I decided to let it dry out for a few days and lo and behold it worked again. Unfortunately it only worked for a few hours, sometimes a full day and then I needed to let it dry out some more. I purchased an extension cord with an on/off switch and hooked it up. Now I can stop the electricity without having to climb up on a chair to pull the plug. Once I was set up with the easy on/off switch I could easily reset it. After about a week of resetting, it got the message. It has been working properly for over two weeks now with no failures.

Touchpad for CVM2072SM2SS stopped working. This touchpad has been creating issues for the last couple of years. Few reconnection of wires got it working for the last few times and now it is completely broke. GE is not ready to help with fixing the issue. It wants to sell me another microwave CVM1750SHSS which seems to have similar issues (also the plastic handle for those microwaves seems to fall apart due to heat). In fact, the reviews for the whole range of GE Cafe series seems to be pretty bad. GE is not owning up the design issues. Too bad!

Microwave counter top - On Oct. 15, 2010, I purchased JES1460 DNWW at Pacific Sales San Jose. Since then, two service calls on this microwave which replaced one that did not work. New sensor on service call 10-10-11. Today is 3-6-12, strong electrical smell practically knocks you out. I unplugged the unit. We always purchase GE appliances. No more, very poor quality. We are upset.

I wish I had found this complaint section before I purchased my microwave. Bought model HVM1750DP1CC in May of 2010. Now, 3 years later, all of a sudden theres no power to the unit. The wall outlet is fine. There were no storms around here when it went out. It just seemed to fry itself! The repair/troubleshooting instructions tell you to get a licensed technician to check this and check that because of the voltage. They give you a flowchart to troubleshoot it yourself, but no pictures to go with the diagram. Sure I can check the fuses, if I knew where they are!GE - NEVER AGAIN FOR ME. Wish we still had good-valued products Made in the USA. This one is made in Malaysia. NOT WORTH IT. Time to sell the GE stock too. Their products suck and class action suits will probably follow. Kris is Pissed!

This unit was purchased at Lowes on 11/22/16 and installed by our plumber shortly thereafter. Its not even 6 months old! It was poor at drying at first and then stopped drying altogether about a month ago. The GE Customer Service has sent a repairman here on 4 occasions in the past few weeks, sent faulty parts, including an element and a board (Im guessing that they mean a motherboard) but it is still swimming in water. Ive asked them to replace the dishwasher, to which they have refused. Yes we are irate, and rightly so. Whatever happened to quality manufacturing and decent customer service? I will never buy another GE product again. There should be lemon laws for appliances.Now we are being informed that the parts are back ordered until September, but that they might be able to get them from California on or about the 25th. Their apologies mean nothing when they do not back it up by amending the situation in an appropriate manner. By the way it takes 256 minutes for a full cycle. The plus side is that it is very quiet, but Im not sure how energy efficient a dishwasher can be that runs that blasted long. It doesnt clean very well either. If considering the dishwasher or another appliance, stay away from GE Is our recommendation.

GE Triton XL dishwasher overheated for no reason and melted the inside components to the point they are scorched black. This dishwasher is worthless. There would have been a possible home fire if we were not at home at the time of incident.

Adora Microwave - door falling apart: This microwave is supposed to be installed above a range. The materials are not suited to this. The plastic door has disintegrated. We have got through 2 handles. I took the 2nd one off to replace it and the plastic that holds the glass in place just disintegrated onto the floor along with much other plastic parts. Why is the door plastic in the first place if they cannot make it from a heatproof material? Only 4 years old and we are going to have to junk it. When the first handle failed under warranty GE said that it was not covered as it is a plastic part! They finally covered it after a long conversation.

We bought a top of the line GE microwave oven (model PEB7226DF1BB sn VA201160N) in 2014. It has now failed 5 times in 4 years - 2015, 2016, twice in 2017 & now 2018 - and the repairs have cost us more than the original price of this piece of junk. We bought it from a local dealer, KAM Appliances in Hyannis, MA, but had to resort to an independent repair service, because KAM was not very responsive. I know that I should have given up on it a long time ago, but in the past I always had good luck with GE appliances. Needless to say, I will never buy anything from GE again. I have learned that GE Appliances are now built by Haier, a Chinese company. No wonder they are junk.

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.

I got a GE cafe two years ago, all the matching appliances. A few weeks ago, we heard beeping in the middle of the night. ow every night at two am we get a message on the panel with annoying beeping. This weekend, we went out of town and when we returned the microwave was and had been on for a very long time. It doesnt take a genius to figure out that our house could burnt to the ground while we were gone! Thank God it didnt! Not to mention. my dishwasher does not clean! It takes 3 runs to wash.

I bought a brand new house and it came with the set of GE profile appliances in 10/2009. In November of this year, it came on for one minute on its own and then popped and indicated a circuit board failure. The inside of the microwave was extremely hot and there was obviously an electrical short. This could have burned down my house! My fiance replaced the circuit board at a cost of $125. I negotiated from the service department that supplied all my builders appliances. This week it happened again. This time, there was a cup of coffee in the microwave and it boiled in the minute before the microwave fried itself! I cant believe that GE still has this product on the market! Any product on the market! I have to replace this because I cant sleep thinking its going to catch my house on fire. Are there no ethics anywhere?

I bought this microwave about 2 years ago (2011). Yesterday the microwave turned on by itself, I tried to stop it by hitting the clear button that didnt work so I had to unplug it. When I plugged it back in it seemed ok so I reset the clock but within minutes it started again, this time the key pad read key pad short-circuit and then went blank. I am glad I was home when it happened. I am now wondering if I should repair it or replace it.

While heating a bowl of butter, my microwave arced. Microwave had smoke and electric fire smell. I have contacted GE. They said it was a rare issue. From the reviews on this site, I do not believe that this is a rare issue. They offered a 25 dollar coupon to buy another one. I do not believe I would do that. GE has had microwave recalls in the past due to fire hazard. I have registered a concern with the Consumer Products Safety Commission.

Bought dishwasher in 2016 for a vacation home. Used maybe 50 times, then door close sensor broke, replaced that and 2 months later, now board is no good. GE makes junk. Repairman also said that switch is known issue and they refuse to fix it. Never buying GE again.

Fourteen months after buying my new built-in GE Profile Microwave/Convection, it stopped heating. I was told by GE that it was not under warranty. I paid close to $300 to an appliance service operation locally to fix my nearly $1,000.00 GE built-in (depending on the microwave to help feed four kids under the age of nine). So, about 13 months later I had another heating issue and I called the appliance service operation and they found another problem with the microwave. They said it was a faulty piece of equipment, replaced it and didnt charge me since they were local and said this shouldnt have happened (knew I was recently divorced and took pity on me). Almost 18 months after this, so three years after the purchase, the microwave started to act up again - it continues to work even after you open the microwave. Just dealt with it since it still worked. However, 6 months later, the microwave now doesnt heat. The power is on, and nothing happens inside. This started a week ago, but it was off and on. Now its dead. Never buying a GE anything. Ive got to buy a microwave and a refrigerator in the next six months. It is NOT going to be a GE!

The dishwasher is new and looks great. However the dishes are not getting clean. After washing with a 200+ minute wash cycle utensils are still dirty and food particles are left on plates and bowls. This is occurring even with a good rinse prior to placing them into the dishwasher. I clean out the food particles filter after every two loads, makes no difference. Also the water bottle jets are a nice idea but water bottles are too tall to fit even with the third rack removed. I am very displeased with my purchase. This was not an inexpensive model.

GE jvm1750sp1ss microwave - bought in 2010, less than 4 years old has stopped working. Lights are on, but when we hit the start button we hear a small pop and nothing else. The clock does work counting down but nothing else. I happen to love this microwave, it was a gift for my wife. It now no longer works and cannot afford a new one. Option 1: replace parts myself for 150.00. Option 2: call a technician for 200.00 plus parts or option 3: do without. Option 4: wait to afford a new one. I guess all things grow old but we should have enough history on these items to post a life span. Well a story like this usually falls on deaf ears but if someone is reading, make the suggestion on the life span or make the parts affordable. Thank you.

I have just purchased a new GE dishwasher because mine just broke after 35 long years of excellent service. I am so completely satisfied with your GE products, and I would like to tell you also that the double oven stoves are still working well.

Started at the front rack hook. My wife stopped the microwave immediately, luckily she was right in front of it when it happened. This is a serious condition that could destroy a kitchen or even the house. I will call GE Consumer hotline tomorrow.

I purchased a GE microwave from Best Buy about a year ago. Every time I wipe it clean, white paint chips come off the inside. This cannot be safe for me or my children. I did contact the company and they were of no help at all. They said that because I heat up liquids in the microwave, this will happen. Duh! I would not recommend purchasing a GE product of any kind (oven, fridge, etc). Their customer service is awful and their products do not last.

We purchased the suite of Cafe appliances. After one year of service, out of warranty of course, the touch pad on the microwave quite working. The touch pad on the dishwasher has several lights that do not work. These products are insanely inferior. If you are considering purchasing, I would buy anything but GE.

We had a GE dishwasher installed by the builder when the house we live in was built and it was one of the ones which were recalled as a fire hazard. We didnt really have any issues with it though, other than it was a bit noisy. With the credit offered, we decided to upgrade to a high end Profile model. The sound proofing is impressive and it was actually hard to tell the unit was on, but that is the only thing you can say that is good about the machine. As a dishwasher, it fails miserably and often items come out dirtier than when they went in. OK, weve struggled on with that for some time now but today, a nasty burnt plastic smell brought us both to the kitchen to investigate. Sure enough, the replacement for the fire hazard was the culprit. Obviously, it will need some serious repairs before it is safe to use once more. Looking through this and other sites, it seems this problem is rife and GE is reluctant to deal with the issues. Well I think that will be our last GE appliance. Thank you very much and rather than throw good money after bad, we will put the repair costs towards another machine ABGE.

Outstanding value and deal the price for this unit was the best one I could find it’s small simple to used and fit in my kitcjechm area like hand in glove I purchase then as matching pair for 429 dollars each all I needed for my new home and they are not bad looking at all,simple set up and great functionalities for the money no complains so far they get the job dome nicely thanks Best Buy’s for sucke great deal and quick delivery

We purchased several new GE appliances in August of 2016 as part of a kitchen renovation. We bought the GE Cafe series dishwasher CDT865SSJOSS. Within two weeks of use, the display stopped working. It took 3 weeks to get a technician out to fix display. Approximately 6 months later, we noticed the dishes were not as clean. Two months later the water stopped draining. Called a technician in, he diagnosed a broken pump. Parts would take 3 weeks and he would be out a week later. We are now over a month without a working dishwasher. He “fixes” the pump but says it isn’t draining great because your hose from your disposal is plugged (this hose drains to the same place as the dishwasher). Hire a guy to unplug the drain ($140). It isn’t plugged. The whole house is clear. Have to Shopvac out the stagnant water from the dishwasher that smells like a corpse. Call our plumber to check the lines ($500). He discovers that the technician pushed in the washer and busted a line. We now have water damage through our floor and into a bedroom below. He confirms that the plumbing is all clear and also finds that the technician never reattached the pan to the bottom so water was hitting the sensor and activating the shut off for a leak. Plumber fixes plumbing wrecked by technician, dries the sensor and attaches the pan. He advises that we run several cycles to flush out the stagnant water. If water still is not draining after several cycles, he advised that the new pump was faulty. Plumber leaves. We get 10 minutes into a cycle and the dishwasher stops for a leak again. I called GE hoping they would stand behind their product that we have now had for 2 years and have used less than a year. GE does not stand behind their products. The only thing they will do is send out a technician that you have to pay $100 for and they can’t guarantee that you won’t get the same technician who has come out 3 times and cost us more money due to his negligence. In May, we will be putting their terrible product out on our curb for city wide garbage collection. You no longer get what you pay for with GE. Do not buy their products!

When we bought our house we upgraded our GE appliances to stainless steel. I had no problems with the dishwasher until a few days ago. Then it stopped working completely. As with most of the complaints I have read the control panel was not working. We took the front door apart just to see if the dishwasher was worth salvaging or should we buy a new one. A screw was NEVER installed on the vent assembly to hold it in place. The entire inside if the door was corroded by steam and/or water. So every wash slowly degrading the electronics. 18 months, 6 months past its warranty where now its out of their hands and you can pay $89 to have someone just look at it. We were lucky it just broke because this hidden mistake on their part could have not only caused a short circuit but a fire. Like so many of the other stories. I will not buy GE again.

Needing some type of warning to indicate a clog or break down. Cycle: Pots & pans; heavy wash; normal wash; light wash; hot start; high temp. wash; heated dry; energy saver; cycle on: plate warmer; start delay (hrs) off, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1; Hot start plate; Pots & pans start; heavy/normal; high wash; heated dry off-rinse only. The color fits my kitchen arrangement. Needs to have a better warranty coverage. Needs a longer warranty on the basic coverage. Do away with extended coverage. Offer all parts and full labor for a longer time.

Have owned, installed, and repaired many dishwashers throughout the years at various houses. This GE unit is by far worst dishwasher that I have ever had the displeasure to install and operate, and it replaces a Kitchen Aid unit that started a fire, see **. Specifically the GE unit had the control panel break off due to misalignment, requiring repair, the drain bulkhead fitting was poorly designed and caused a leak, requiring repair, the water solenoid valve failed in the 2nd year, and finally the door does not lock closed without significant care and attention to alignment and requires many attempts to lock closed for the start of cycle. This is the worst and I cant wait to pull it out and replace it.

I have a GE microwave and was using the exhaust fan on it when it stopped working. I am getting the same message as other folks - KEYPAD SHORTED. I have barely used this product since it is in a vacation home. It looks brand new, but I am really disappointed in it. My cousin told me shes had problems with GE appliances and will never buy another.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

Negative 5 stars. I purchased a GE over the range microwave oven, JVM2052SN1SS, just over a year ago and had a service call to address a lack of exhaust about a month after my purchase. In summary, the tech said it would not function as a dedicated exhaust hood and nothing can be done. 14 months later, the key pad began malfunctioning. Also, the moisture sensor that the operation manual stated will automatically start the exhaust fan, never worked and every time we cook, moisture would build up between the glass on the microwave door.I called GE Consumer Relation today and they will not address this issue free of charge. I will not purchase another GE product because GE dont stand behind their products.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.