Less than three years ago, I purchased a microwave oven wall unit to replace an existing unit. Due to the size of the built-in cabinet, I was limited in choices. The cost of the unit was $2400. A few months ago, the interior wall of the unit began rusting and the enamel is peeling. I contacted the customer service dept via e-mail on their site. I was asked to send pictures and then informed that I should stop using the unit immediately due to the danger of arcing. I was also told that because I did not purchase the extended warranty, the best that GE could offer me was a new unit for $800. I asked for names of warranty companies and was given one name and number but told there were others that also offered the same service. I called this company and they clearly told me that the peeling and chipping was a manufacturer’s defect and would not have been covered by an extended warranty had I purchased one from any company. Then I contacted the GE repair service center and spoke with them. The man who answered explained that this is a cosmetic problem and that there was no danger of the microwave arcing unless there was less food in the microwave than the size of the area that was chipping. I am very disappointed in the response of GE, the pressure placed on me to make a decision in 7 days or the offer would be withdrawn, and the fact that the service department and the consumer service (complaint) department gave me entirely different responses to the same information and problem. I will probably have my cabinet rebuilt to avoid having to replace this unit with another GE appliance. Who would pay $$1600 for the use of a microwave/oven unit for less than three years? Unfortunately, GE seems to be the only company that makes a unit that fits the existing cabinet in my kitchen. Disappointing to say the least.

Ease of use, intuitive and good looking. Compliments my existing kitchen appliances and decor. I have a GE profile and has lasted now for about 6 years. I really don’t have any issues with the microwave and never needed any kind of service on it.

GE Profile Dishwasher Model GLD4400N10WW - This was the second GE dishwasher I have purchased and it will be the last. When guests come to my home, they ask whats wrong with my dishwasher when helping me in the kitchen. The racks are bubbled and there is a burn mark by the heating element from overheating. The dishes have always been too hot to unload afterwards that you have to leave the door open for ten minutes before touching them, or you will burn your hands. I purchased this dishwasher from Lowes on 2/23/2008 for $368.88. I see that there is a recall on the dishwasher now, and it is only worth a repair. Quite frankly, my dishwasher is all ruined inside and it needs more than just a new heating element. It isnt worth it to me. It is very noisy and sounds awful when I use it. I will not be putting any money into replacement parts at this point, and I am very disappointed with my purchase. A dishwasher should last more than 3.5 years. My dishwasher should be replaced for free, not just get a new element. My husband is a licensed builder and he will not be using GE either, after this experience. I am enclosing a photo of the burns.

Bought at Lowes (GE Slate GDT655SMJES Dishwasher). Even bought the extended warranty. Leaked and buckled the floor while it was under GE warranty on December 12. Had to file with our homeowners insurance to get entire floor replaced, $1000 deductible, twice. They have been out 5 times and still not fixed. Now the new flooring is damaged from same leak. After nearly $5,000 of damages, not to mention the time we have spent you would think a new $700 dishwasher would be cheaper. We bought the refrigerator, double oven, convection stove and dishwasher, matching. At this point seriously considering buying a different brand of dishwasher even though it wont match the slate. Never will we buy GE again, they dont stand behind their product, disappointed in Lowes as well for passing the buck.

I have a GE over the range microwave oven purchased in 2011. 4 years old, hardly out of its service life. In 2013, while heating up my lunch, I heard a loud buzzing and popping noise. The plastic hooks that hold up a metal tray (yes, the unit comes with a metal tray) in the microwave oven caught fire. I called GE and demanded they repair the unit, they said they were not responsible since it was out of the warranty period. Having experience in the insurance industry, I reminded them about product liability, if this is a common occurrence, there would be potential liability issues for GE. The service tech said they would send someone out free of charge to repair the unit. He replaced the two hooks that fried and said they were no longer responsible for unit. Today, 01/28/15, we just had it happen again. One more hook caught fire. Hey GE, do you really think I will buy any kind of appliance from you again when you make a defective product and dont stand behind it? I will not. I would recommend people do your research carefully when buying a microwave oven, especially one from GE. I would recommend anyone do research when buying any kind of GE product since, in my opinion, they clearly do not care about their customers.

I have had 2 Profile dishwashers in the past 3 months. I have not been able to use either one. First one had a cracked tub and the replacement would not run. I tried for hours to contact GE customer service and was placed on hold for almost an hour before they closed for the day. Not only is this washer a piece of garbage, GE customer service is terrible. Do not and I will say this again do not but this product.

Model # JVM1752SP2SS - I have had my microwave for 5 years. Last night, my husband and I started smelling burning rubber. That lasted about 20-25 minutes. Then my husband heard a strange sound coming from the kitchen. When he went to investigate, he found our microwave on fire.

I have the same microwave for 15 years and it works great, we use several time a day to heat up food. I would highly recommend this product to all of my friends and consumers. If I remember correctly my mother had a GE microwave and oven when I was growing up.

I purchased a GE microwave and had 3 different problem with it. They sent a service man out and he could not fix the problems. Now GE said they are closing the case even though they know I do not feel the problem has been fix. My other GE microwave, I really liked until it stopped working around 8 yrs old. This one is a piece of junk. It is an over the stove microwave so I cannot just take it back to the store. I would say GE has really gone downhill over the yrs. This will be the last GE product I ever buy.

I bought an above-the-counter GE microwave model JVM15405N155 and exactly after four years, it made a buzzing noise and just stopped. Now I knew why the dealer pushed the service contract so hard. I called GE service and the lady told me they cant troubleshoot the product over the phone. I should have never bought an American-made product, rather, American-sponsored as the product was made in Malaysia. Horrible service and never will buy one again. Where were the good old days when made in America was the Gold Standard?

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

We have a GE Advantium Microwave. It is our second model (we moved and left the first one behind). It is spacious, has an intuitive menu system, cooks extremely well, also includes a convection oven feature that we use to great advantage. The nicest microwave weve ever used (and weve used plenty of them).

Second GE Spacesaver Microwave - It is a total mystery, no clock, no light, no fan, no power. We replaced a GE Spacesaver that came with our house with a new GE Spacesaver Adora (Model DVM1850DM4WW). It has been in use for less than 2 years and has been used only a few times per week. I have a Sharp Carousel II that we use in our basement. It gets as much use as the new GE. It is 28 years old, and works fine every day. This is the second GE product and this one lasted less than 2 years. Ill never buy another GE product. I was trying to support an American company. Anyone know a good one that makes microwaves?

I purchased a GE monogram microwave along with all the other brand new appliances when I remodeled my kitchen. Let me be clear when I say I will never buy another GE product again in my life. Not only is the product inferior but the customer service department is run by a group of very inept people that lack basic communication skills. The microwave I purchased needed two repairs within the first five years of purchase. I have a microwave in my office at work that I purchased over 10 years ago and Ive never had an issue with it. Needless to say, it isnt a GE product. Last April the microwave started acting up again and kept turning itself off. We didnt even bother calling GE because like everything else their repairmen are also incompetent. 1-800-Appliance came out and found that the magnetron needed to be replaced and we should just purchase a new appliance. Because our microwave had been installed in a custom made cabinet and the trim kit was still good, we made the mistake of purchasing the same exact microwave from GE for convenience. This was in April of 2014. Right now I am waiting for a GE repairman to come and take a look at it because it is already not working. This is after I spent an hour on the phone with consumer relations. I will never purchase a GE product again.

I had a blow up with my GE microwave which came with 2 metal racks. I used the rack once and the microwave flared up as if I had warmed something on aluminum foil. I removed the racks. The microwave is 2 years old. Last week I warmed a chocolate chip cookie on a paper plate for 10 seconds. Immediately the microwave flared up, the plastic bracket that the shelf rest on burned and melted. I was lucky no one was hurt or a fire resulted. GE came to inspect the microwave and offered to replace it for $258.80. I am arguing with GE. I want them to replace it free of charge. Their own technician tells customers to never use the metal shelves. I maintain that the design or brackets are faulty and GE should stand behind their products. This microwave was always used correctly. Do consumers have any rights at all?

The microwave is large enough for a whole chicken and operates at both a high speed and good efficiency. Most items can be timed within minutes of properly prepared meals.

We have a GE profile dishwasher for about 14 months. I just found out last week that its out of warranty and that the 2 circuit boards inside are bad so the tech came out and didnt have a replacement board on his truck saying they never have problems with this dishwasher so hell order this part and be shipped to my house. He would install it on the following Thursday so Im sitting here waiting for service. I finally called to find out that GE decided that it is going to be repaired on Friday. I did not know this of course so I asked for a supervisor. I was put on hold with no answers, finally hung up in disgust.

I have a GE dishwasher installed by our builder. It is 6 yrs. old and for 6 yrs. it has been a problem. I already had it serviced in last years recall and now I get another notice. It is located close to our TV viewing area. and is so noisy. I hate to run it when we are watching TV. I would never buy another GE. We are also having problem with our GE double oven. I ruined several holiday dinners before realizing the temperature was 75 degrees where it should be. A replacement part is almost a $1,000. I would never ever buy another GE appliance.

I purchased the GE Cafe dishwasher in March 2010. Starting in January 2012, some of the keypad options stopped working. Then in April 2012, the keypad stopped working completely and I could no longer get it to turn on. I did call GE for repair. When the repair person was out to fix it, they said that this model has a design flaw. It was originally designed to sit 1 below the countertop so that the heat could release without shorting out the keypad. However, that would require a person to somehow raise their entire counter or fit the dishwasher below the floor somehow. GE was aware of the problem but decided to ignore the problem. That means that even though my keypad was replaced, the same problem will occur again and again no matter how many times the keypad is replaced. I paid over $1400 for this model, and the labor charges alone cost me $200 for the repair. I think it is absolutely despicable that such a large company has allowed a high-priced, defective product to go out into the market, knowing that a major malfunction will occur out of warranty in such a short period of time.

We did not choose our dishwasher. It was installed by the builder but its served us well for the last 3 years. Its good quality and cleans the dishes well. It is also relatively quiet while its washing.

Its been a decent dishwasher. Usually residue left on something. Even with rinsing. And weve tried all brands of detergent. Rinse, China, speed cycle, normal, pots/pans and anti-bacteria cycles. 9 hour delay and extra hot wash and heat dry settings. It works for our family. A load every 2 days or so. Its almond/bone colour. The hoses are flimsy. They seem like they could leak at any moment. Not sure Id buy another GE.

I have been trying to get this dishwasher to work since April. I have had it serviced 2x and yesterday the board was replaced. Soon after the dishwasher started to say the same thing again. Press start and the cycle is paused and will start in 3-2-1. it does not start but repeats and beeps over and over. I have done everything in my power to get this rectified. It will run out of warranty in October and I havent been able to use it. As a consumer I am demanding a usable product that I spent my hard earned money on. Here is the model CDT875P4N2W2. I will go to any lengths to get some attention in this matter and I hope Consumer Affairs can contact GE Corporate for me.Dr. David ** Lewes Delaware

My GE Profile Dishwasher is a plain Jane without the bells and whistles, yet is a trusted, working appliance. Honestly, the only beef I have with this model is that plastic articles do not dry completely unless placing the controls on Heated Dry, and leaving the dishes in the dishwasher for the entire drying cycle. I have had my kids place some dishes in the dishwasher, caked in day old food. I left the plates in the dishwasher, hoping to teach my kids a lesson about rinsing off their dishes before placing them in. Imagine my surprise when after running the dishwasher through its normal cycle, the plates came out spotlessly clean! Impressive!

Our GE Microwave Oven/Convection Oven Combo (Model: PT970SRSS) is a little over 2 years old. The interior paint on the ceiling of the microwave oven is chipping and bare metal is exposed. In addition, the microwaves glass turntable frequently slips off its plastic tripod base. Circular scratch marks, which also expose the underlying metal are evident in the area which is located directly below the glass turntable. The circular scratches are a direct result of the glass turntable scraping against the paint. The GE repairman said chipped paint is not repairable and that paint should not ever chip in a microwave, let alone a relatively new microwave. After many calls back and forth to the GE Consumer Relations person, we were offered a new combo at a discounted rate of approximately $1,000. (We paid around $2,000 originally.) Im not satisfied with this offer. I strongly feel that consumers should NOT have to pay to replace a defective item. GE needs to pull these defective and dangerous products off the market! Take a lesson from GM!!!

One of the most disgusting situations I have ever been in. I purchased a brand new home with all new GE appliances. I have since learned that a technician was sent out twice prior to our walk-through because the superintendent noticed the dishwasher wasnt working properly. I registered all my appliances online. The first time I used the dishwasher, it flooded the kitchen floor, causing the builder to have to repair baseboard and drywall. A technician came out and repaired it. I used it an additional two times and each time I did, it flooded my kitchen and a repairman came out. After the second time, I contacted GE customer care to open a case. The third time, I requested a new dishwasher and the customer care agent, Stephanie, stated that my new dishwasher was a discontinued model and so she suggested one that was a slight upgrade. I agreed to this change and she informed it would take approximately 24 hours to have it approved. I have since talked to seven different people at GE customer care. This was started when a company called Barlows Distributing showed up unannounced at my front door approximately hours after my discussion with GE. They said they were here to install my dishwasher. I was rather shocked, said the timing was impressive, and let them in the door. After they had drained the water standing in the then current dishwasher, they started to put in a replacement. I looked at the box and realized they were placing the same model in. I told them that was unacceptable, because according to GE, I was being approved for a different dishwasher. I then told the tech to stop installing it and called GE. GE had no idea where this dishwasher had come from. Then an unavailable number showed up on my cell phone and when I answered it, the woman spoke my first name and started talking about my dishwasher, stating the builder had ordered a new one. I asked her who she was twice and she would only tell me GE customer care and not her name. I have since learned her name was Julianna. She said that I had to take this dishwasher or I wouldnt have one at all. I took this as a threat. After spending countless hours on the phone with GE opening a case and discussing the issues, picking out an acceptable replacement, I was then told the builder made this decision. Not only was I thrown from person to person over a discontinued model, I was threatened, and further was told by the superintendent of construction that once the dishwasher was installed and we closed on the house, I had to handle all problems through GE. I own the dishwasher, not the builder. I registered the warranty, and I handled it through the proper channels. I feel I need an explicit apology from GE. One of their arms doesnt know what the other arm is doing. During this entire time, I had little use of my right hand and seven fractured vertebrae (for which I am permanently disabled) and had to physically wash 10 boxes of dishes that had been packed up due to our move and stand while doing it. GE has caused me property damage, stress, and severe physical pain, yet threatens me and yanks me from person to person.This is my house, my dishwasher, and this matter should have been handled directly with me, instead of inviting someone into my house that I had no connection to or knowledge of. The really sad thing is that I just purchased and had installed a $6500 water softener and reverse osmosis system for the whole house, manufactured by guess who...GE.

I purchased new home with new GE appliances. The dishwasher from day one has been a problem. It constantly leaves water droplets inside on top, sides and door of dishwasher as well as all plastics are covered in water after even using heated drying selection. I was told after 2 visits by GE repair that it functions as designed. We have water softener, use rinse agent and quality dishwashing detergent, and the water temperature is within acceptable range.

Built our house and had new GE Appliances. Oven is a GE Profile and the computer panel went out twice in the first 2 yrs. The profile microwave model PEB 7226 SF1SS IS NOW ONLY 3yrs old and not functioning. We rarely use the microwave. Will never buy GE anything in the future.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

My microwave (model#JES1139BL03 and serial#901897B) is peeling around rolling fixture that holds glass tray. I wipe it with hot water and it continues to peel off. Its almost all gone. Ive only had it two (2) years. This cant be normal. Anyone else have this happen?

We bought a new GE microwave oven in 2007. It failed in 2018 after much, much use. We replaced it with a Whirlpool which failed in one week. Lowe’s let us return it and we bought another GE like our original and we are very happy with it.

The side panel of our built-in GE Profile microwave 1999 caught on fire when my daughter was using it. It had a faint glow behind the metal plate. Then, it became flames quite quickly. A flash and pop was the ultimate end before we turned it off during the test. It had been working fine until the fire. This is a definite safety issue. Now that I know the microwaves have been faulty, it makes me concerned about the GE Profile electric stovetop burner. I have noticed it gets extremely hot and doesnt seem to want to turn off!

It doesn’t do the best job of cleaning without rinsing first. Start button is difficult to operate and plastic membrane worn through. Both shelves began rusting within a few years. But no mechanical/electronic issues ever.

Periodically my GE Profile Dishwasher will not clean well. On every occasion it is due to clogging of spray ports on the upper and/or lower spray arms. Removing the blockages is nigh-on impossible as it is often not possible to extract the blockage from the outside and its not at all possible to flush the blockage back down the arm to extract it at the centre. All that is required is a bit of forethought and the creation of some access to the arm. I was frankly surprised to not be able to find a replacement arm as the suggested solution to this problem, the additional part revenue being part of GEs the business model. There are a number of other design issues with the assembly at the bottom that make me think it was done by an intern and nobody checked her work at the end of summer break before it went into production.

I wish I had found this complaint section before I purchased my microwave. Bought model HVM1750DP1CC in May of 2010. Now, 3 years later, all of a sudden theres no power to the unit. The wall outlet is fine. There were no storms around here when it went out. It just seemed to fry itself! The repair/troubleshooting instructions tell you to get a licensed technician to check this and check that because of the voltage. They give you a flowchart to troubleshoot it yourself, but no pictures to go with the diagram. Sure I can check the fuses, if I knew where they are!GE - NEVER AGAIN FOR ME. Wish we still had good-valued products Made in the USA. This one is made in Malaysia. NOT WORTH IT. Time to sell the GE stock too. Their products suck and class action suits will probably follow. Kris is Pissed!

We have not had any issues with our microwave. It is relatively easy to operate (how difficult can it be, right?). Overall, we are pleased with our microwave. The microwave was already installed when we purchased our home, so I cannot speak to whether or not it is worth the price.

It works well. We like this newer GE Profile with many preset buttons such as for different times and food types, and defrost. The last GE Profile MW we got had a knob that got loose right away and hard to use, like a dial-up AOL, so this upgraded model is much more convenient. I like the bigger plate size, and that the turntable can be turned off if we put a rectangular casserole dish in there.

Dont buy one. I bought two last year. The first one completely died before the 60 days were up. I took it back to Sams club and bought another. The tag inside says it was made February 2011, so its only a year and a half old. Under the carousel, the paint is peeling big time. I wrote GE repeatedly, asking if it was still ok to use it. After ignoring me for quite some time, I got this reply. In the notice, they told me to get Sams club to replace the defective and apparently unusable product they are selling knowing it is defective. I love the part where you cant cook something with too much liquid in it. Who does that when they microwave?Heres what they said: Thank you for contacting GE regarding your microwaves and the paint peeling issue. I did some research on it and found that it a common issue among all brands. Excessive heating of un-covered liquids can create a high amount of condensation that the inside paint is not meant to withstand. Minor chips to the coating on the microwaves interior cavity will not affect the products performance. However, if the coating is actively flaking or peeling anywhere inside the oven cavity (including under the turntable), discontinue the use of the microwave and replace it. GE does not have an approved method of repair, and the microwave is not repairable. Please return to Sams club for an exchange, if you are still within the one year warranty. If Sams is refusing to accept the return, contact the Sams Club Support Team at 1-877-885-2787. GE will then reimburse Sams club.

My microwave is a very easy to use. The settings are not complicated and offers a variety of options. It has a shelf and turntable that can be shut off and on. The filters are very easy to access and clean.

I cook a lot of popcorn in my microwave and it hasnt burn a bag yet. It warms food quickly. Also, it cooks bacon really good. But the best feature is the steam cleaner that saves me time. It steams for about 2-3 minutes then all I do wipe the steam off and its clean.

GE Cafe microwave and GE Oven. Caution before you buy GE. Both appliances needed service 1 month after purchase. Had service come to my home 5 times. Had to wait up to four hours for service person each time. Also, parts were on back order. Had to wait weeks for parts to arrive. Keep in mind these are BRAND new GE top of line appliances. And no parts to fix them. Service is terrible. GE not the same company as years past. I would NEVER EVER buy this brand again. What a hassle. Still waiting for parts. My dealer even called to help and GE would not even help the dealer expedite the problem. Total lack of good customer service when you have a problem.

I bough a GE microwave oven, model JVM1740SM1SS, less than 2 years ago. The keypad says that it is shorted out and needs service. It turns on randomly. I unplugged it and plugged it back in, and it will either say, service needed, keypad shorted out or press clock.GE has so many complaints about there microwaves, some that are very serious. They still claim that there are no problems with them. They have to know there are problems, but do not want to issue a recall and take a financial lose. Its only a matter of time, before something so serious happens that it will be a bigger financial lose than a recall.

GE model #pem31sm3ss microwave has paint peeling on the interior. GE says it is not safe to use, yet will not replace it. Purchased 08.2010. There are other consumers online with the same problem. There should be a health safety recall on these units. GE offers a $50.00 rebate on a new unit, a far cry from replacement cost.

I have had this microwave WES1130 for several years now and the paint began peeling before year two. Nearly all of the paint is now gone (fallen into my food). Also, I bought this microwave to replace a larger GE microwave that had failed after only 3 years. The 8-year-old GE fridge is humming loudly and leaks onto my floor, which has ruined the wooden floor and warped it. I will never again buy a GE product, and neither should you. They do not care at all about quality.

Our GE microwave is used primarily for heating things though sometimes something is actually cooked in it. It is a useful tool and saves time and labor. I would rather have one than not.

We have had the dishwasher for 4 years, and the dishwasher went out twice, the refrigerator also went out a few times. They just dont make stuff like they used to. To make matters worse it sounds like the fridge is getting louder and louder and I dont want to call the to call the techs back out.

Purchased my GE microwave roughly 2 years ago. Recently it started running with the door OPENED. I cannot get it to stop even when pressing the cancel button. This happened whether or not there was time remaining on the clock. I was very concerned about the microwave rays being harmful to my children. We unplugged it overnight, it worked for literally 2 minutes and then it would not even turn on. Model number HVM1540SN2SS. Pretty upset that I have to buy a new microwave already!! I was going to replace it with another GE microwave to match my other appliances, but after reading so many posts of other GE microwaves running with the door open I think I will slowly work GE appliances out of my kitchen.

I bought my GE DISHWASHER many years ago. Only use once in a while because there are just 2 of us in the house and it takes too long to fill it, but when I do use it it work fine.

GE dishwasher model # GDF610PGJ5BB was fine the first year and a half. It began making noise with electronic control panel beeping for no reason. The wash cycles were incredibly long. Finally after reaching the 26 month mark, the electronic panel gave out. Having no warranty, I called the repair division of the appliance store we had purchased it from. They were to charge me $90 just to come out and look at it. With the purchase price just under $500, I wasnt willing to take the chance of repair costing a third or half of the purchase price. Regretfully, we decided to give up on repair of this dishwasher. We decided to purchase a new dishwasher, but certainly not a GE.

Great microwave I have had for almost 10 years. It works like new. Its a name you can trust and not expensive at all. I have always believed in the GE name and their products. I have a dishwasher and dryer that work just as well. I will continue to buy GE products.

We purchased a GE microwave/convection oven which developed peeling on the inside top of the microwave. GE contacted me and offered a replacement ($300 toward a shelf model or prorate the microwave/oven). Why would we take $300 replacement when we paid nearly $3000 for this oven???? So we took the prorated one directly from GE. We felt confident that we would not have a repeat of the problem. The oven was manufactured in December 2012. After it was delivered, I noticed a rough area on the turntable; and after the oven began to peel AGAIN on the second oven, I believe that the rough area was due to a remanufactured part on the oven.Now we are stuck with another microwave/convection oven combo with the same issues as the first oven. I never used anything harsh to clean the oven and now this happens again. Why cannot this company manufacture an oven that will not have defects in it??? I am tired of peeling paint on a second oven when I have done nothing except pay them for 2 ovens. Why cannot they use stainless steel interiors, and this would stop the many complaints that people make about the product. I would NEVER again purchase another product from this company. The products I have purchased have been inferior. I paid for two microwave/convection ovens and still have one that is inferior!!!!

Microwave and convection oven together...perfect for heating food or baking. Very easy to operate. G.E.profile. Mounts over the stove with an exhaust fan and lights. Also has a rotating plate in it to heat evenly.

I bought this dishwasher GLDT690TBB-00 on 05/12. Its not even 2 yrs old. I had some minor complaints about how hard it was to fit bowls, how the utensil rack wasnt easily accessible, how long the cycles took, how it had to be vented right after a cycle to keep clean dishes from smelling musty... But I was willing to put up with that. I spent about $700 new. The dishes did come out clean, if I stacked them properly. I only used it when full, about 2x/week, as I am an aging widow & live alone. It stopped functioning a few days ago. Control panel lit up, a little water came in, but no action with spray, etc. Called a local repair company today. They say the control panel is shorted out, and that in turn burned out the motor. The repair cost would have been $524.61. REALLY? Not doing that! Very disgusted. Ill never buy GE again. Last KitchenAid lasted 12 yrs, but as all the repair guys say: They dont make em like they used to! Too many bells & whistles. All I require is clean dishes, and for the appliance to do its job.

I remodeled my house 5 years ago and went with the GE Profile appliances in my kitchen. Last week I had run the dish washer cycle and noticed the soap had not dissolved and the dishes didnt seem to be clean so I ran the cycle again. I started it at about 8 pm and we went to bed not thinking any more about it. About 1 am I awoke to a horrible plastic burning smell. I checked through the whole house and could not find where it was coming from until I entered the kitchen. As I entered the room my eyes started streaming from the burn. I opened the dishwasher and smoke starting bellowing out of it. Not just smoke but a toxic smoke filled the room. The inside of the dishwasher was so hot and everything plastic inside was melted. The bottom drawer and parts of the dishwasher were also melted. The silverware tray full of silverware was all melted together. This all occurred in a matter of 5 hours. Had I not woke up when I did, who knows if we would have woke up.The house was full of toxic smoke that did not trigger the smoke detectors. We just went ahead and purchased a new dishwasher and had it installed yesterday. This morning my husband decided to do a little research on this product and found there was a recall last year. I contacted GE and found that our model was not part of the recall because it has a stainless steel interior, only the plastic interiors are part of the recall. I also found out that had we called them and had them send out a certified GE technician look at it, they would replace it. Too late it has already been replaced and sent to the recycle center. I did take pictures and have record of the model and serial number which doesnt matter. I just want to get it out there that this product is also dangerous and a fire hazard. This product could have easily caused a fire in my home. I also wish I would have done more research before we replaced it. Our new dishwasher is a GE Profile...

We purchased this microwave in 2016. It worked fine for a few months then one day we go to use it and it would not start. It took pushing the start button 5 times for it to work and the express cook did not work. Then 2018 came and it was November 2018 and the microwave started to short out and started smoking. So we bought a new Panasonic microwave and so far so good. Would not tell anyone to buy a GE brand item ever again.

2years and 2 months GE Model JVM1540 microwave purchased at Sams quit heating. Everything works other than it does not microwave, GE customer no-service says the part magna something is covered for 5 years, however the labor is not. I offered their customer no-service dept. a deal. If it was my fault the MW broke I will pay the entire cost to fix it but if it was a defective part, they have to pay the entire bill including labor ( which is the right thing to do). They declined to do the right thing.

My dishwasher is doing the same thing as the recalled models. The GE Cafe model is not included in the recall. The dishwasher front, which is stainless steel, becomes so hot it burns to the touch and stays that way for hours. Burning smell in the kitchen! Cafe models need to be added to the recall!

We renovated our kitchen with all new GE Profile appliances in 2017 before moving into our new house in 2018. Nov 1, 2018 our GE Profile stopped working and showed a leak message. We called GE who referred us to A&E Factory Service. The repairman arrived Nov 6 and proceeded to not be able to pulled the dishwasher out and tell me the list of things he wont do because of policy. Without inspecting the dishwasher but looking at his computer with the list of things that could be wrong, he said he ordered two parts and would return on Nov 23. Nov 23 came and no repairman. Calls were placed to GE Parts and Service who expressed their disappointment over the no show then proceeded to say that parts would not arrive before Nov 30 and that one of the parts was on back order. Once the parts came then another repair appt could be made. I will have been without a dishwasher for over a month with no alternative recourse. Service response and A&E Factory Service is less than poor.

Bought a new GE microwave cafe series in May 2014. Within one month the handle which was not stainless steel started to peel and cut my wifes hand. GE sent a replacement new door for the unit that did not close. Then he had to transplant the handle from the new door to the old door. A month later the unit failed. A new replacement unit took 2 months to replace. It has worked 3-4 weeks and has also now totally failed. Our experience with GE CAFE microwave and GE service process is poor to miserable. I would not recommend this product or their service to anyone.

Remodeled our kitchen back 6-7 years ago and bought GE Profile appliances from Home Depot... bad mistake. The microwave/convection oven came as one unit and now due to paint peeling on the microwave interior - inside top and sides we need to replace the entire unit to the tune of $2,500 plus. I called Home Depot and asked if there was a government mandated recall on the item... and they asked if we purchased the extended warranty. What? Does anyone know of a recall or class action suit on the following item: GE Profile Model: PT970SMISS. Manufactured December 2007.

The wheels to roll tray in and out comes off sometimes, other than its fine, average wash cycle. Doesnt really clean heavy food off dishes so have clean first then put in dishwasher.

Updated on 12/30/2018: Again had GE up, said it was not the pump as they stated. Hired a plumber as they requested, pipe not blocked. Changed connections and now the machine has no power. Again have to call for repair. I am sure they will have to order a part or tell me to call an electrician. I am so done. Please beware. Do not buy. Still not been able to use my dishwasher going on 4 weeks and brand new.Original Review: Purchased from Home Depot. I have had it for only one month used 4 times. The water did not drain. Called GE Repair. Guy came down, couldn’t figure out what was going on, said it must be the pump or it could be blocked. He went downstairs, could not find the pipe. Been there since 69...said he is going to order part. Waited 1 week. Then he calls me an hour before he was to be here. Mind you I took off work to be there. He said, “Did you have plumber to come in to see if there is a blockage and he needs to show you where the connection is?” Are you kidding me. I told him I am handicapped and having company for Christmas and I need it. He said he can’t come until I hire a plumber as he can’t find the dishwasher connections. Are you kidding?I said, “Can you come and install the pump and if it doesn’t drain then I will call the plumber.” He said no as he can’t find the connection...I am going to put 150 to have a plumber come when I know it’s the pump not a blockage to have the plumber show me where the dishwasher is connected because the idiot can’t figure it out. I said I need it for Christmas. Nobody working until next Wednesday. Do not get a GE. Poor customer service and to break down a few weeks after purchasing is unacceptable. I had A Bosch for 6 years, never a problem. Plus the lower rack tracks already fell apart. I live by myself and does not get much use. I read the reviews and should have known. The only reason I purchased I needed the bisque color. BUYER BEWARE.

My dishwasher came with the home when we purchased it, and we did not see any good reason to replace it. It is a standard model, with a nice stainless steel interior. We have had no problems with it and plan to use it until it fails. I would like to have the upgrade model in a new home. This one does a good job washing the dishes.

GE states they do not repair microwave ovens under warranty. Instead, they offer to reimburse you at MSRP for repurchasing the unit if you will show evidence you have ruined the units operational function. The interior bulb burned out in my unit, I disabled the unit, sent in pictures and receipt. They sent a coupon for about $30.00 less than MSRP and lied about the conditions of reimbursement. Brendia, the agent I spoke with, broke off email contact when I stated the unit was no longer available from the sellers on the GE seller list (including the seller I originally purchased from), and that the unit was only available at MSRP from the online sellers I could find. My microwave is inoperable and GE has not responded or offered to increase reimbursement to MSRP. I have not located a chain of command to whom I can report Brendias dishonest management of my case.

GE Profile dishwasher washes dishes, pots, and cutlery well. Nice capacity. Also has an antibacterial cycle which is handy when someone is sick. Doesnt have a grinder in the drain (which my KitchenAid had) so I rinse everything before I put it in the GE dishwasher.

Microwave Model JVM1750DP2bb defective construction- Plastic is protruding inside the Oven. Took possession of a new home in January 2014, but only occupied part time. I estimate we had the equivalent of 6 months being occupied. In January 2017 the magnetron broke down, at which time I noticed a piece of plastics protruding inside the microwave through a vent hole on the Magnetron side. I did not take the extended warranty and GE only offered to send a repair man. Since this is an over the stove model venting outside, it had to be repaired or replaced. Checked with the supplier and they estimated a minimum of $ 300 repair cost. Home Depot had model JVM6175DKBB on sale for 249.00, and with delivery, and installation, were talking $ 350.00 to $400.00 to replace. I got in touch with GE Consumer Affairs, and they did eventually agree to provide the JVM6175DKBB for $ 270.00 including installation. They will take possession of the old model, so there wont be any way for me to confirm or deny a manufacturing defect.

I love GE's washing machines front loader and it's excellent. I've never had to have them come out and four years to fix anything on it. Cleans very well and washes the clothes outstanding and it cleans up very easily when you clean it through the cycle that comes with the machine. It's relatively easy to understand as far as the button setup on there. I also liked that you get the echo warm in the Echo cold features along with the regular warm and cold. I did purchase the block that the time that I got it which helped out a lot is I'm 5 foot 10 and it's the perfect height. It helps getting stains out really easy as I have a nice here to play softball. I would definitely recommend this washer to anybody and everybody. I even wash my huge comforter for my bed in it and it washes it great every time.

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.

I rarely use it. I know to avoid too close to the signals produced in the microwave and use it only about once a month.

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

Dishwasher works great, I just wish it was a little bigger. I usually have to work hard to get everything I have to wash into one load. But if I could give it a 4.75, I would, because dishes are spotless when I remove them.

I am rating my over the counter GE microwave model no. JVM3160RFSS. Ive had it for over 2 years and its still performing well. Pros: Solid feel, sturdy door mechanism, easy to clean interior, attractive design, fairly quiet, adequate lighting inside, reasonable price, fan works okay for moderate smoke, short reheating times for lighter fare, cooks frozen foods quickly. The integrity of the interior is good with no chipping or cracking. Cons: Fan is inadequate for heavy smoke if searing beef, hot and cold spots while reheating heavier foods such as mashed potatoes or casseroles, controls are hard to see in dim or moderate light. A suggestion to GE would be to make microwaves with optional backlit buttons to see at nighttime or in dim lighting. I like that GE manufactures most of their microwaves in the United States.

Since 2010, our 2006 GE 1.1 cu. ft. countertop microwave oven model # JES1136WL has had power failure problems. It began in our previous home and now in our next home. All of a sudden, Id check the panel and it would say PF, which means power failure. So, Id reset the clock and there it is, ready for the next usage. Over a year later, in our new home, as of yesterday, it will start and immediately cut off. Now, weve been using this microwave in the same plug since May and now its October. So, what happened? Today, Im looking for the users manual and have located it online. But it appears that the PDF GE has for it, the Adobe document, has a problem. So, Im going to check it on my laptop, as this is my PC. Thank God we only paid under $100 for it. On some of these consumer complaint stories, the person paid a great deal for theirs.

At least 3 times, with different people in our household, our microwave has started on its own. It was plugged in but with no input from anyone. We checked the website and no recall. Microwave just out of warranty. This was a disaster in the making. We took it as a sign to discard this appliance. GE NO MORE!

Entire inside is plastic crap. Dishwasher is very loud and takes a long time. Racks are ok but cheap feeling. If I was choosing, I wouldnt buy it. This GE was in new house. Overall feel is very cheap. Too much plastic. Very low end builder model. Steel inside or heavy plastic will take more beatings.

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

I would not buy G.E. ever again! I remodeled our kitchen and have had more trouble with all the Appliances! They were all G.E. Frig, Microwave, Dishwasher and Stove and cooktop! Had to be serviced, all of them the first month!

I bought a brand new GE Spacesaver OTR mount Microwave (Model # jnm1851dmbb) and had installed in my new home by the appliance shop where I purchased it in November, 2010. I am a widow and I use the microwave maybe 3-4 times per week, and take very good care of it. I went to steam some fresh veggies this evening and the whole unit just went dead. There’s no fan, light, or keypad. It is plugged in and I did not blow a fuse or switch. I checked them all. It’s just plain broken after less than 2 years of very light use. It’s a piece of junk! I’ll be buying another brand this time. I will never buy a GE again! It’s a junk, junk and junk!

In January 2013, my husband and I purchased new appliances from Home Depot, including the above referenced dishwasher. The first dishwasher was delivered broken. The display panel was detached from the body of the dishwasher. At that point, I was concerned about the quality of the product. From the way it was detached, it appeared to be very cheaply made. (It was also installed incorrectly, causing a leak under our sink and ruining the bottom of our cabinetry. We settled this with Home Depot, but I include this detail to help emphasize my frustration over this whole situation.)When I contacted Home Depot about the faulty product, they agreed to provide a replacement, so I decided to give it another try. I wish now that I had simply returned the product and purchased another brand. Upon receiving the new dishwasher, I noticed immediately that the edge of the inner rack was scratched so badly that the plastic coating was gone, and rust had already begun to appear. I had to call customer service and get replacement racks. (More on this to follow.) Allow me to detail our service call records:Call #1. Heat dry didnt work at all. The technician told me that I needed to run the water in the sink and make sure it was very hot before running the dishwasher, and he changed the settings. This created a slight improvement, but not much.Call #2. Soon after, detergent tabs started to get stuck in the dispenser cups. I was using the exact brand recommended in the manual. The technician told me that detergent tabs were just the worst, and that I should try gel detergent, even though this is contrary to what the manual states. The detergent ruined my silverware, and I have had to purchase a new set, which I now hand wash.Call #3. Using gel detergent did not work. Technician came back, and told me the wrong replacement racks were sent. That must be what was blocking the water from getting to the soap. He ordered another replacement rack. He brought a plastic door, watched the water, and told me the upper arm wasnt spinning fast enough. He made an adjustment and claimed to fix that.Call #4. Detergent still not emptying from the cup. A different technician came back and used the plastic door. He found a different problem, but did not have the parts to fix it, so, another service call had to be scheduled.Call #5. Technician comes back, and finally fixes the detergent cup problem. For now.Call #6. Heat dry now does not work at all. There is so much water on the dishes that I have to hand dry them, and afterward, I have to mop my floor. There is just a massive amount of water in the dishwasher. In addition, it will not start except on a one-hour delay. Pushing the delay button does nothing to change the settings, and does not allow me to scroll through like it should. This appointment is scheduled for today, but I am not hopeful that anything will change.At this point, I have no faith that this dishwasher will ever work. Customer service did extend my warranty for six months, but that is the only concession I have gotten from them. That extension will expire soon, and I fear that at that point I will simply have to spend another $600 on a new dishwasher and leave this one on the curb. Its unacceptable for any consumer to have to purchase a new dishwasher less than two years after purchasing from GE.

I have had a GE Profile countertop microwave for 13 years and it still performs great. I bought it at the time because Consumer Reports magazine rated it as one of the top microwaves. It performs well on all functions.

Have a GE dishwasher put into operation June 2016 (new home). In Oct 2016 we noticed a leak and a serviceman came out and identified a loose soap dispenser - tightened it. Next time we used it, leaked as before. Same serviceman came again, this time replaced both the main seal & spinning water distribution wand assembly. Again, the unit leaked and on Dec 14th same serviceman replaced the soap dispenser. Before he got too far down the road, we called as the unit again leaked. He blamed it on excessive soap suds - which he removed manually. Following his departure, we again experienced a leak. Same serviceman returned on Dec 15th. After review, he advised us the DW would be replaced and we should get a call within 48 hrs to arrange. On Dec 17th (still no followup from GE) the DW leaked again - we video this time. On Dec 19th called customer relations and after much discussion it was apparent GE has NO CLUE what the heck they are doing. ONE MORE repair trip was scheduled - this time they would replace the inside and outside panel! We are fortunate to be retired otherwise this repair process would have cost us about $2000 so far! How idiotic is GE?? How much have they spent to avoid replacing this unit? Believe me this is the LAST GE appliance we buy from them. Dont know how they stay in business. We are awaiting the panel repair guy as of this writing. Will update once this service has been completed.

I have had this dishwasher for less than a year and it doesnt work. The soap dispenser does not always open or it opens but the soap is not dispensed and just dribbles down the inside of the door. I have called in multiple trouble tickets. They have replaced the computer and the dispenser and have ordered another new computer and dispenser because the problem hasnt stopped. When I called GE to complain that I have had the unit repaired too many times and would like a replacement, they said if it is reparable, they will not replace it. I explained that it is not reparable if they fix it and it breaks again. This past Saturday, the tech told me that I need to run my hot water for ten minutes prior to running the dishwasher and that I should move the silverware caddy from its current location in the front (where it is supposed to go) to the back, taking up space in the rather small tub so I have less room for dishes, which, by the way have to be thoroughly rinsed before washing them. I explained to GE that if I have to jerry-rig the unit to make it work, then it is not reparable. Would they say it was okay if the latch didnt stay closed and I could just put duct tape on it to make it stay shut? If the product does not work as designed, and when the instructions that are provided with the dishwasher are followed and it does not work, it is not reparable. They refuse to replace it and while they did extend my warranty, there will come a time when that warranty is up and it will start to cost us money for all the repairs. It is costing GE more money to keep sending out techs and re-replacing parts than it would to just replace the relatively inexpensive dishwasher. Would I recommend this dishwasher to a friend? I would not recommend this dishwasher to an enemy! DO NOT BUY THIS DISHWASHER!!!

The GE microwave oven that was installed by the owners of my 130-something unit apartment complex caught fire in June 2014. The manufacture date is listed as December 2012. I moved into the unit in June 2013 and the microwave was brand new still and had never been used by anyone else. I myself rarely use the microwave and only use it for heating up cold food that I previously cooked on the stove top. After heating up rice using the 2 minute express option and removing the food from the microwave, I had gone to the restroom for 30 seconds only to return and find the microwave on fire. The fire ignited from the ceiling of the microwave. I had initially intended on going to the bathroom to take a shower but needed to open a new bar of soap, so I had only returned to the kitchen to throw the soap packaging in the trash. Had I not done the latter, my entire apartment could have caught fire and it would have been difficult if not impossible for me to escape from my third floor apartment. Reading all of these complaints it is really hard to believe that a government agency has not stepped in and forced GE to STOP MAKING MICROWAVES! From the complaints on this board it is clear to see that every year GE continues to make appliances that put consumers safety and lives at risk. You would think that after so many recalls that they would have perfected their product by now, but that is not the case. It almost seems as though they are just slapping new model and serial numbers on the same BAD product. The management in my building contacted GE and my microwave was replaced with another GE microwave manufactured in 2014. I did not want another GE microwave, but I only rent so I didnt have a choice. I used the microwave once so far and the fan automatically came on after 2 minutes of use. It does state inside the microwave that the fan may come on automatically, but I just dont trust this brand anymore. I have a countertop microwave that works perfectly fine that Ive owned for over 15 years that I will be using. I will unplug the GE microwave and just keep it for aesthetic purposes, since thats all its good for.

After only 4 hours of installation, the microwave turned on and the fan and light came on. It was not cooking anything. Inside of microwave was hot and I could smell a burnt electronics smell. I unplugged it, waited a few minutes, and when I plugged it in, it started up again. The LCD screen was scrambled, all lit up. Opening the door stopped the unit, but it started again when I plugged it in.

4th service call for a piece of ** over the range microwave that keeps breaking. The service is a joke too. The sent some moron to come take a look at the microwave after I placed this latest service call. He came and without diagnosing, he ordered a few parts and scheduled a follow-up for today. He called this morning to reconfirm the appointment (which was already confirmed 2 times previously and this reconfirmation has never taken place previously) and I missed his call. When I called him back short whIle later, his voicemail directed me to call the 800 #. After a 35 min hold with them, they said since I didnt pick up the phone in the morning, the appointment was canceled. What???? It states nowhere that theyll call you to reconfirm an ALREADY SCHEDULED AND CONFIRMED appointment and that if you miss the call, they cancel the appointment. Next service call is a week from now, which makes it 3 weeks without a microwave. I hope they rot in hell.

I had trouble from the beginning; the dishes came out hazy. When I called GE, they said to use the recommended detergent; I did. The dishes came out hazy and smelled like detergent. They messed around long enough with that and getting someone out to fix the controls, which did not work properly, until enough time lapsed and I could not get a refund. The dishwasher turned itself on after a power outage. It was not running when the power went out and was running non-stop for God knows how long before it was noticed. This happened at Thanksgiving time, and they had service out at 6 weeks so I had to do Thanksgiving dishes by hand. After that, they postponed for another 2 weeks. I got a replacement dishwasher, thanks to the Home Depot Manager. The dishes come out stinky and hazy; sometimes, there is visible soap residue on the glassware. I even ran the dishes through a second no detergent cycle and still had residue on the dishes. The controls do not work. We have to turn the power on and close the door 3 or 4 times before it will come on. We are afraid to leave the circuit breaker on when we leave as we are unsure if it will start on its own like the first one did. It is also the worst designed layout for loading any dishes. This is totally unacceptable as soap residue causes intestinal difficulties, and you should not have to be afraid that your dishwasher will take on a life of its own and start. I highly recommend you do not waste your money on this dishwasher. GE has extremely poor customer support. Home Depot support was great. This makes two GE Profile Dishwasher in less than a year and two strike outs. They will not get the chance for a third out. We are getting a KitchenAid.

Great microwave when the thermostats are working. Have gone through 4 in 2 years. I have convection/microwave. This is a great oven, and microwave. The failing parts should be something GE corrects. Service contract was purchased after 2nd needed repair. Their contracted service was awful. No communication, mis-scheduling, unavailable parts, Poor customer service. Have officially requested with GE not to have this contractor assigned to correct any problems in the future.

Ive owned my GE Profile dishwasher for 6 years. Two months ago the pump had to be replaced and this is quite an expensive item. Then the other day I went to open the dishwasher and the doors spring gave away, hence slamming to the floor and crushing my big toe. The repairman said it was not the spring that broke but the link that holds the spring in place. The spring is actually quite strong but the link is just a flimsy piece of plastic. We are both anxious to see if the replacement link he ordered has been made stronger and are replacing both just to be sure it doesnt happen again. Although my toe isnt broken, it is extremely bruised and painful so I am going to be ever cautious of opening the dishwasher again.

We purchased our new GE Over-the-Range Microwave (model HVM1750DPWW, 1.7 cu. ft.) for $269.00 in February of 2012 and in August of 2013 it started to malfunction. Specifically the microwave would start on its own whenever we would OPEN the door. Now the microwave does not work at all (with the door closed or open). Based on the feedback that I have read in some of the posts on this site, I will replace the microwave since the maker can no longer be trusted to manufacture units that are robust and safe. But what manufacturer can be trusted at this point? It is my understanding that all microwaves (from all major companies) are currently made overseas with poor materials and highly suspect safety and quality standards. (Note - previous GE Microwave [same type - over the range] lasted for 14 years.) Thanks to Consumer Affairs for allowing us to post unfavorable reviews.

We lost our old refrigerator to a lightning strike and had to get a new one ASAP, and it had to be counter depth, a great ice maker, side by side, and not be a SS finish. My wife and I hated our old SS one but liked everything else on the old unit so we went looking for a new one that met these requirements. What a chore, this was not an easy unit to find as most everything now has a bottom type freezer. This was defiantly out of the question.

I like many other people have had issues with the keypad malfunctioning. The first one shattered the first time I used the microwave, I then replaced it 2 years later and now another 3 years the second one stopped working. GE was rude when I talked to them, said they had no record of my replacement keypads even though I contacted them directly and were offering another for $514. That is no deal, I could get one in the store for that price. Also, the icemaker and water dispenser in my GE Cafe french door refrigerator are constantly malfunctioning, my range keypad does not always work, and the seal around my dishwasher keeps coming off! GE these are not quality products and you do not stand behind them.

I called GE, b/c the microwave has paint flaking off and piling on top of my food. Just like snow flakes. You tap the inside-ceiling with your index finger lightly and it looks like theres a snow fall inside the microwave. Lots of metal is exposed. GE answer: metal is non-toxic, do not worry if small amounts ingested! Told me to not use it anymore and replace it at my own cost. After insisting that they are responsible for a defective product, they will give me a break of $100 on the price, conditioned on them confiscating the above microwave (so you or someone else does not use it). Bad deal. I am looking for another brand!

We have had our GE dishwasher model GDT580SMF5ES for only 1 year and a half. As I was closing the door the hooks that attached the outer shell/panel to the door broke. Unfortunately we didnt purchase extended warranty so this will not be covered. We have had two technicians from our home insurance coming in but we are not sure yet if the policy will cover the repair. I just cannot believe this is happening as we have barely used this dishwasher as it is only my husband and myself. All I can say is dont buy GE.

It could clean better without pre-cleaning. Its necessary to pre-clean heavily dirty items. Works ok if dishes are just moderately dirty. Could also be quite a bit quieter. However it is about 15 years old and still running but sometimes motor freezes up if not run often.

If I could give it less than a star, I would. We bought the GE model JEB18600M2WW as a wall insert microwave earlier to replace a 1999 GE of similar version that went out earlier this year. We use it 2-3 times daily, 30 seconds here, 2 minutes there. Today, I went to warm up the babys bottle, and it made a weird sound and went dead. Im sure its the same thing everyone else is complaining about. I wont be buying another GE microwave again.

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.

My 5 years old over the range GE Microwave Oven in my old house had a keypad malfunction. I replaced that oven with a different brand. This time, my 2 years old GE profile microwave in my new house has the same keypad shorted like other users posted. I was hesitating to buy this brand at the time. But the look and match with other appliances, plus the good deal from vendor, I gave it another try. I made a terrible mistake. No more GE appliances for me.

First, I want to acknowledge that I misplaced my receipt due to a move, 8 storage units and 4 houses. But...I did register my new, never before installed dishwasher when it was installed October 2020. After install I ran it empty to test/clean it. IT LEAKED. I called GE to schedule repair. I was told it was manufactured in 2018 (another said 2019) and it was not under warranty. I explained I purchased it only a few months before and installation was delayed due to my contractors. They said I would have to pay for labor but the parts were covered under warranty. I didnt like it but agreed because I couldnt find the receipt (from a big box store).Local repair people came, after 2 more calls, 3 weeks later and fixed the leak. They did not run or check if anything else was wrong with the dishwasher. I began using it and quickly realized that it did not get the dishes clean. It does not heat the water, it does not dry, it cant possibly sanitize without heat and kitchen installer said it was missing the kick plate. Geez!! And this is just the things I know!! I have called 4 times now to schedule a service repair, each time having to explained the whole thing, sit on hold, ask to speak to a supervisor, be transferred to customer service and 4 times I have been DISCONNECTED!! I bought all GE appliances so they would match but I would give anything if I didnt have to deal with GE again!! Unfortunately, I will have to call again Monday or buy a different brand. Save yourself and buy another brand!!! Wish I could submit a picture.

My GE counter top microwave (JES1456), purchased from Home Depot less than a year ago, just stopped working today. No lights, or anything. The electrical outlet is fine. The GE warranty appears to be effectively meaningless. It is cheaper to replace the oven, than have it repaired. I will avoid GE products in the future.

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

I called to see if someone can help me figure out why my built in microwave is running but no heat. Apparently the customer service keeps insisting I need to schedule a service without offering any kind of help. Why do I have to pay for a service trip when I can fix it with the right part? Unlike other appliance they always have customer service helping to see and figure out what might be wrong to the appliance.