My GE Profile Dishwasher is a plain Jane without the bells and whistles, yet is a trusted, working appliance. Honestly, the only beef I have with this model is that plastic articles do not dry completely unless placing the controls on Heated Dry, and leaving the dishes in the dishwasher for the entire drying cycle. I have had my kids place some dishes in the dishwasher, caked in day old food. I left the plates in the dishwasher, hoping to teach my kids a lesson about rinsing off their dishes before placing them in. Imagine my surprise when after running the dishwasher through its normal cycle, the plates came out spotlessly clean! Impressive!

The door handle broke on GE Advantium microwave. My complaint is that the plastic handle costs $103.00 just for the part. That is ridiculous! The unit is 6 years old so I dont expect it to be free. I just dont understand how they can justify that much.

Today I heated some spaghetti sauce in my microwave and it splashed, so I wiped it out. My microwave is built in and was pretty new and in the house when we bought it 4 years ago. It is in the base counter so I have to reach down to clean it. l havent had a problem with it but when I wiped the inside top I felt bumps and when I looked at the cloth to see what was on it, there was paint on it. That has never happened before so I of course looked and there is a fair amount of peeling paint in one spot. I have had microwave ovens for many years. Never had this problem with any other brand. What is that?? Can it be fixed? Is it dangerous???

I purchased a GE Dishwasher 3 months ago and it has been broke (wont drain) for almost a month. I tried to schedule a service through GE since it is under the warranty and they never showed up for the second time. I called and complained but it is not just the product, their service is even worst than the product. I am going to take the unit to Home Depot and ask for a refund or exchange with another brand. It is suppose to be brand new and wont drain or can we get a service scheduled. Never buying this brand again.

I would not buy G.E. ever again! I remodeled our kitchen and have had more trouble with all the Appliances! They were all G.E. Frig, Microwave, Dishwasher and Stove and cooktop! Had to be serviced, all of them the first month!

When the handle on my expensive replacement (GE Profile for GE Profile) microwave/convection oven peeled, we called our retailer (PC Richards is really good about service). A new door showed up and it, too, has a plastic handle. The difference is, this time its solid grey plastic as opposed to white plastic with silver paint. Seems to me that an expensive SS appliance should have an SS handle. Too heavy? Just use a tube of SS - not solid. Too hot if above burners? Didnt my last GE Profile micro/convection have a SS handle? I spoke with customer relations. The person was well trained not to say anything that might suggest she agreed with me. Since the issue is cosmetic and not functional, I have to consider the issue dealt with now that the door has been replaced. I told them I will do my best to publicize this issue and that I will never again purchase a GE appliance. I also called CEO Jeff Immelts office in Connecticut. I made it clear that my dissatisfaction has cost them a long time, loyal customer and that I would spread the word. I would appreciate if anyone agrees with GE that a SS handle would be too hot over stove burners.

GE continually shows us why they are failing as a company. In just this last year I have replaced a less than 5 year old GE microwave, three separates parts to my GE monogram refrigerator, and now this one and a half year old dishwasher. The only appliance that GE makes that hasnt broken is the stove/oven that is over 10 years old and shows no signs of weakening.I purchased the upgraded stainless steel model that contained all the bells and whistles. It lasted 1 year and 3 months before the entire control panel stopped working. We utilized the dishwasher about once a week or once every two weeks in a two person household. Hardly a rough environment for a 700$ appliance. The repair costs was quoted for 99$ just to have GE look at it. The control panel was 140$, plus additional labor. This amounts to over 280$ to repair a year old product. I advise buying LG or Bosch.

GE Microwave was making intermittent buzzing noise 1 month after purchase. Called GE & they said they could send a tech out to check it but if they didnt find anything I would be charged a service call. I stated it would only do it once in a while so was concerned it wouldnt do it when tech was here & I would be charged so I passed on the tech. Microwave continued to make noise periodically but seemed to get less as time went on. 1 year & 10 months later it started to sound like it was arcing & shut off. Again it was periodic. Called GE. They sent a tech out & it only shut off but no arcing sound or intermittent starting & stopping. Tech stated it probably was door micro switch, but when GE called me back they said he stated it probably was circuit board. Whatever the cause it is still what I would call arcing & going off & on.GE stated They could give me a discount on a new microwave which amounted to cost of $100.00 more than I paid for it in the first place.

I bought GE Profile appliances 5 years ago. The dishwasher motor needs a new one. It cost me $300.00 to fix and I ended up buying a new dishwasher, of course, no more GE. Six months ago, my GE profile fridge is not making ice. It cost me $300.00 to fix. Now, the freezer is not working right. I was told another $300+ to fix. I went out and bought a new fridge. Back to basic, Kenmore brand. GE profile is not inexpensive and only last 5 years, starting to break down. Please stay away from this company.

This is my third microwave since 7/13. The first day I used it did not turn off, the fan and light stayed on so I returned it to H&R Greg drove to their warehouse and bought a new one. Six months later, doing the same thing, would start up by itself, very dangerous and not shut off. Had three different repairs on it three days from work!!! They came out a week ago, installed a brand new one, same model. Next day, doing same thing, started by itself. Now have to plug and unplug it for use. Now they are sending out a service call to look at it for what I told them whats wrong same as the others. The only good thing about the people at the service center have been great and the service people too. I just want this fixed. Model # jvm1750dp2WW Spacesaver.

Enamel curdles and becomes unattached from the ceilings of the interior of the microwave. Family member purchased 3-yr. newer model and the same thing happened. Theirs makes a terrible noise while cooking! Inferior product - inferior, unreliable materials!!! No accountability or sign of improvement! I will never buy a GE product again.

Cost of washer $749.95 plus 4-yr warranty, install and hoses, $273 equals $1,023 for this GE stainless interior tall tub dishwasher GLD8700N20BB that only lasted 6 years and 4 months. It wont run, wont fill with water, nothing. Six years. Time to buy again. My advice, buy a cheap one and replace it every 36 months and forget the extended warranty. Installed: Sept. 2009. Dead: Jan. 2016. This was a replacement to an LG dishwasher that completely flooded my kitchen and caused a total tear out of my kitchen, and my homeowners insurance took LG to court. That LG cost $42,000 for a new kitchen and months of contractors and work. Washing dishes by hand is looking better every day... Think about it.

I wish I had found this complaint section before I purchased my microwave. Bought model HVM1750DP1CC in May of 2010. Now, 3 years later, all of a sudden theres no power to the unit. The wall outlet is fine. There were no storms around here when it went out. It just seemed to fry itself! The repair/troubleshooting instructions tell you to get a licensed technician to check this and check that because of the voltage. They give you a flowchart to troubleshoot it yourself, but no pictures to go with the diagram. Sure I can check the fuses, if I knew where they are!GE - NEVER AGAIN FOR ME. Wish we still had good-valued products Made in the USA. This one is made in Malaysia. NOT WORTH IT. Time to sell the GE stock too. Their products suck and class action suits will probably follow. Kris is Pissed!

This brand far above the Standards for this type of unit. This is my second purchase of this brand and I would recommend it above and beyond any other manufacturers. It’s very quiet and does a superb job of cleaning, and this dryer beats all the other. Keep producing this fabulous device, thanks.

It is so quiet. I have to put my ear to the door to make sure it is running. Its the quietest dishwasher I have ever owned. It is a GE Monogram. I feel it is a little small on the inside capacity but I love how quiet it is.

I own a GE counter-top sensor microwave oven model #JES1451, which was only 2 years old. At 3:00AM, I woke to a room full of smoke and a burning plastic smell. I immediately rushed to the source which was my microwave oven. It was going by itself and the panel read sensor error with smoke billowing out of it and flames erupting. Luckily, I had a fire extinguisher handy. I had never had any problems with this microwave prior to this experience. I cringe at the thought of what could have happened to my home and my family sleeping upstairs if I hadnt been nearby.

My GE Adora microwave is about 6 years old and for the last year it has had an issue with moisture in-between the glass front door. It was streaky and now I have cloudy blotches. Called GE repair and it would cost close to $90 just for service call not including parts/labor. Think twice before purchasing this microwave. Not a happy consumer.

Our GE microwave/convection oven model number JES1290SK01 is making grinding noises and has caught fire once on the side panel. We have owned this microwave for only 4 years. It was a terrible investment. No wonder Obummer had to bail them out. That is the quality the unions are currently producing. It’s sad really...

Super sad about the performance of this dishwasher. This is the second leak in a year. The first time my husband fixed with new GE pump because we wanted the dishwasher up and running and the scheduled repair time was out more than a week. We were also told there would be no reimbursement to the damage to the brand new floor that was damaged. This time I REFUSE to have him fix the dishwasher even though once again the repair time is out more than a week. The cost of this dishwasher should warrant a functioning product.

Its an older Hotpoint, and the layout is fairly roomy for a dishwasher of its size. The last apartment I was in had a comparably sized dishwasher that had too many shelving elements that got in the way of being able to just shove some dishes in there. Ive discovered with this dishwasher I need to stick to powdered detergent because the Hotpoint doesnt fully dissolve tablets. It does a fine job overall, though.

Purchased a GE over-the-range microwave worth about $400. About 2/1/2 yrs in it stopped working. Had a GE repairman come out to fix it. They charge $95 just to come out. I complained so they gave me 50% off parts and labor after the initial investment. It took him about ten minutes to pull out the defective part, a $10 thermostat which he replaced. Total cost: $162. Ive had GE products for years but the new ones are much more cheaply made IMHO. Made in Malaysia. In addition, the handle is breaking off as are plastic parts coming of the top of it. I guess Ill consider getting extended warranties from now on because these products are cheap. If Id had it longer, Id have bought a new one instead of fixing it.

My husband and I bought my mom a new microwave, an expensive GE model. It was great, but then all of a sudden we heard a bang pop and the microwave was burnt. Now its seriously peeling on the top bottom and sides. I HAVE NEVER SEEN THIS BEFORE EVER!

We built a new home in 8/19. Much to our dismay, the builder only offered GE appliances. We had a bad experience with a GE appliance in the past so we went with the most expensive offered, the Profile series. Nine months into our new home, the microwave push button to open the door broke (with food stuck inside). I was only able to schedule an appointment through an automated system. Days later, repairman breaks door trying to get food out. Parts were ordered and new date was set for one week later. Day before that appointment, I got a call canceling my appointment due to the part being on backorder. The entire call took 57 minutes. New appointment was set for an additional week. Again, appointment canceled and part was ordered from third party. Third appointment was a repeat yet again (but without a call and with repairman showing up). The rep did say she would send $70 for us to buy a small microwave while waiting. We are now at three weeks without our microwave being fixed and I have spent HOURS on hold trying to get to a resolution. Last representative asked why I even made an appointment if I didnt have the parts. What!! They have scheduled the appointments. I asked to talk to a supervisor but then was told it would be 24-48 hours before someone could call me back. The rep said this is the timeframe they quote for a callback but she didnt know when anyone would actually call. No idea how much longer we will have to wait-it seems we are at their mercy. When buying new appliances in the future, we will ask who services their warranty! Either way, we will never buy GE appliances again.

This GE Model JNM1541 is a 1500 watt, under counter microwave with quite a few features. It has plenty of cooking power and has not failed in its nearly 5 years of use. I have never used the included metal shelf.

Two years ago, I replaced my 25-year-old GE bottom-of-the-line dishwasher because it made a noise like a freight train. I was ecstatically happy to have a brand new top-of-the-line stainless steel GE Profile dishwasher that hardly made a sound while working. Well, that is the best part of the new machine because it also hardly cleans. We have tried different detergents, additives, etc. We have checked our water temp, pressure, etc. Not only does the machine not clean all the silverware/dishes, it doesnt dissolve and remove all of the liquid detergent, so I have to run the machine through another rinse cycle. We are so frustrated in my house that we have finally given up and now hand wash our dishes. I hate this dishwasher and would never buy another GE product again! I also had an issue with a GE bottom freezer fridge. But thats another story. By the way, the old 25-year-old machine? It always got my dishes clean.

We bought a new GE dishwasher 28 APR 2020. I noticed it wasnt working right about 5 months later. We are just over 1 month from the end of the warranty. The store where we bought it has been fantastic, but theyve been out 5 times to try to fix this sucker and they cant. GE told ME they would replace it if the store called to say they couldnt fix it, but when the store called, they refused. Theyre sending the repair guy out yet again one week before the warranty expires so he can call them and theyll talk about it while hes here. Ill never buy another GE appliance again.

Our microwave (GE model JEs1655DR1BB) is only a couple of years old (if that). Today, my teenage son went to make microwave popcorn and the microwave made the most horrendous noise and started sparking behind the panel on the side. It lit up the entire room. I went and checked to make sure there wasnt something foreign in it (there wasnt) and stupid me thought maybe it was the popcorn so I tried a bowl of water. It did the same thing again. I am just thankful it didnt start an actual fire, but I am furious!

We bought a new GE dishwasher Model # GDT655SGJ4WW. Did not work right out of the box, had service guy come and control board was bad! Really brand new dishwasher, 2 weeks to get that fixed, now the soap dispenser door wont stay closed, order part, whats next? Contacted GE about it, waste of time, no quality control and they dont stand behind their product! Stay away from GE, last appliance for me!!!

I purchased a GE over-the-range microwave in 2008. After 3 years, the magnetron went out and the microwave stopped heating. I called GE repair, and they told me it would cost over $300 to fix - close to the cost of a new microwave. Stupidly, I bought another GE microwave in August 2011, model JVM1750DP1BB. In the one year Ive had it, it has broken 4 times. One time, it was the magnetron (seems like a common problem). Another time it was the motherboard. Another time, it was a bad wiring problem. Each time, I called the GE repair service, and it takes 1-2 weeks to get an appointment. Twice, they cancelled my appointment on the day because they overbooked. Given that I had to take time off work for the appointments, this is a huge inconvenience. I have been waiting over this last time for an appointment, after they again cancelled my scheduled appointment. GE makes a terrible product, and their repair service is a joke. I bought GE because I wanted to Buy American, but they have completely turned me off. Think twice about buying GE! You will waste lots of time and money.

My microwave is a very easy to use. The settings are not complicated and offers a variety of options. It has a shelf and turntable that can be shut off and on. The filters are very easy to access and clean.

After a year and 1 day of use the microwave blew out and got in fire. Fortunately I was nearby and was able to extinguish the fire. I called the customer service that told me the warranty was over and all they can do is give me a discount on the purchase of another unit, and that I was on my own for the collateral damages due to the fire!

We bought our first new dish washer 2.5 months ago. It has never worked since we got it. Figured out it was the door. We have called SIX times to GE to have someone come fix it They told us that their systems were changed and that they would take care of this! No phone call back or anything. I finally had to called the service people my self. Whats the point on a warranty if your not going to help. I will never buy another product from GE again!! I am VERY disappointed in the service. If you say your going to take care of it and call me back, then take care of it.

While the microwave works fine, as far as microwaves go; it does heat unevenly but eventually gets the job done, the interior is cracked and shows signs of rust and deterioration. I dont remember ever seeing this on in previously owned microwaves. I would only use it for basic heating and reheating.

We usually turn on the dishwasher in the night. Last month ours started smelling smoke in the morning 6:00 am. When checked, it was the dishwasher that melted couple of plastic cans and its own sprayer and other plastic parts (pictures speaks for itself). When checked with GE, this model was not under recall (there are other models with similar issues). They sent their technician, who confirmed that newer models has auto turnoff circuit. When I asked GE rep, both (level 1 and her manager) assured me that even though it shows its burnt from inside, it would have contained the fire inside, which I disagree. Even after seeing pics, their tech review and the whole incident, their engineers determined this is not a safety hazard to me or my family.

We bought this microwave (GE DE68-00307A) brand new 2 years ago and the paint is peeling off everywhere!!!! I keep my microwaves extremely clean, and this was not due to wear and tear by any means. I would say it started after about a year and a half of having it. I have showed multiple people and I cannot believe this is not on a recall list. This is extremely dangerous and could cause many issues. I am hoping someone can do something about this manufacturer and this product. This alone will make me never buy a GE product again.

Sometimes there are dishwashing detergent (powder) left on the dishes. Nothing extra, very basic, it has regular or pot scrubber cycles, air dry or heat dry, a slot for dry rinse liquid, detergent slot, short wash cycle, upper rack, lower rack and flatware basket. Came with the house purchased 17+ years ago. White body with black upper control panel the entire width of the dishwasher. It is still in very good condition, but then I take care of everything, always rinse everything before placing them in the dishwasher. Never needed service yet.

Bought new Spec house with all GE appliances (was charged extra). Dishwasher Model GDF510PSD1SS wasnt drying dishes, run time 3 to 4 1/2 hours. Opened door to stop it. Have to hand wash first, then place in dw. Service man said dishwasher working properly. All was wet, rinse aid constantly leaking. Tech replaced. Inside of dw gray color had milky white film on it, dishes, rubber gaskets around door. Tech poured citric acid sol. on filter. Next run, white film again. New Cuisinart pots, pans, lids, silverware & all, scratched and nicked in first wash. Found a piece heavy glass and screw in DW. Tech said someone forgot to put screw in panel and he didnt know where glass came from. Seven + tech visits, GE Consumer Relations refused my calls. Every 2 to 3 weeks, have to remove, clean filter, bottom screen, hand dry. One cycle works. White film was hard water buildup. A used dishwasher!! Bought water softener. Problems with R.O System & Refrigerator. NO More GE!

Our first microwave lasted 15 years now this one 1.5 year. No help just buy a new one. Or pay 100 for their service call. 100’s of consumers with same exact problem and they just get away with it. Ridiculous.

I like the electronic beepings that let you know your settings, and it can be changed to your preference. I inadvertently hit the settings button and turned off the beeping and I thought the microwave was failing after only 3 months, but I discovered my error, fixed it, and all is well.

We purchased a new home with a GE Profile dishwasher installed. Since the day we had it, we have never been satisfied with the cleanliness of the dishes. They frequently come out covered in food and must be rewashed. We now routinely prewash everything in the sink and we always use the cookware setting to wash everything. Despite this, we still have to re-run loads because they are not clean.I am convinced that there is a design error with our dishwasher, because the top dish shelf obstructs the door of the soap compartment and prevents it from fully opening. After a load has run, you can still see leftover soap dried and crusted in the soap container. If the dishwasher cannot even wash the soap out of the soap compartment, no wonder our dishes are not clean.

I have had the GE Profile for approximately 8 years with no Issues. I learn something new it will do every now and then I had no idea was possible. I stillHave not conquered the convection baking and that is my fault. I need to use it more often since it wouldn’t heat up kitchen like the range does especially these hot summer days in Texas.

In 2008 I redid the entire kitchen and purchased all GE Profile stainless steel appliances thinking I was purchasing quality items. Well, it didnt take long before the dishwasher broke but it was fixed for free by GE under a recall. However, now the refrigerator has begun to leak under the right corner of the ice/water dispenser located on exterior of freezer door and the microwave touchpad has also failed as I need to press below the actual keys for it to work half the time. When I spoke with GE customer service they basically told me there was nothing they could do with the refrigerator, I would have to call a repairman and have it looked at or pay their $100 diagnosis fee.The microwave they told me had issues with that particular touchpad and had it broken within first 5 years they would have repaired it for free under their recall program. But since its 7 1/2 years old I would have to buy the touchpad which normally only lasts for 6 months to 1 year or buy a new GE microwave and they would offer a rebate. Im so unhappy with their customer service and poor reliability of their products that Ive passed on each offer as I dont want to contribute another penny to a company that in my opinion is unethical and has horrible reliability. 3 out of 4 of my fancy GE Profile stainless appliances have broken! Thats a 75% failure rate! No thanks, Ill buy elsewhere. No wonder they cant sell their appliance business and why the stock hasnt moved in years... Wake Up GE, do whats right for your customers!

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.

I have had 2 Profile dishwashers in the past 3 months. I have not been able to use either one. First one had a cracked tub and the replacement would not run. I tried for hours to contact GE customer service and was placed on hold for almost an hour before they closed for the day. Not only is this washer a piece of garbage, GE customer service is terrible. Do not and I will say this again do not but this product.

Wife called me at work to tell me our house is filled with smoke. Our GE dishwasher caught on fire 20 mins after she did a load of dinner dishes. Thanks to my 10- and 4-year-old kids who were in the living room playing, when they smelled smoke, they quickly ran and got the fire extinguisher and yelled to my wife. They ran out of the house and called the FD. Their quick thinking prevented it from getting worse. While on the phone, I had her go and turn off the circuit breaker. We got lucky this time, someone was home...

Ive been battling this dishwasher since it arrived 9 years-ago. It was a warranty replacement we were stuck with from GE. Plus, we paid $300. We could never get it to clean dishes, no matter how we loaded it or what we used, so we gave up and hand washed dishes for years. This year, I am committed to getting the dishwasher working because of hand eczema. I took it apart and cleaned the sprayer arms, filter & wiped it down completely. I also ran a dishwasher cleaner through it. I finally got it to clean dishes, but only if they are thoroughly rinsed first and on the Pots/Pans setting. After a month, it stopped cleaning my dishes again. I took apart the dishwasher again, and cleaned everything. Now, glasses on the upper rack in the back are not all getting clean. I never overload it. Im convinced that GE Dishwashers are just junk. Someday, Id love to find a dishwasher that actually works. :-( Frustrated!!!

I like microwaves to a point. If my wife puts my dinner the refrigerator and I take it out and put it into the microwave if the dinner has let’s say pork chops, mashed potatoes, peas everything gets cooked except the mashed potatoes. They’re always cold and sometimes the peas will pop. There’s never a good medium for all foods at once and if you have any bread or biscuits you have to take it out after 15 seconds. The same goes with turkey cranberry stuffing and other things that go on the plate at Thanksgiving. Some stuff gets very hot. Some stuff stays cold.

After heating some water in the microwave, I opened the door and removed the water. A few minutes later, I heard a noise and noticed the microwave was running and the control panel indicated it was off. I opened the door it turned off. Closed it and it was on. Smelled something burning electrical in nature. I had to kill the circuit breaker to turn it off. I opened the door and felt the inside of the microwave and it was extremely hot. I was concerned that it could result in a potential fire, I continually checked it until I felt it was cool.

Great microwave when the thermostats are working. Have gone through 4 in 2 years. I have convection/microwave. This is a great oven, and microwave. The failing parts should be something GE corrects. Service contract was purchased after 2nd needed repair. Their contracted service was awful. No communication, mis-scheduling, unavailable parts, Poor customer service. Have officially requested with GE not to have this contractor assigned to correct any problems in the future.

Microwave (over the stove model) is also supposed to be conventional oven, but does not do that well. Just use as microwave. As microwave, easy to use. Now 14 years old and still going strong, although a little dated in appearance. Grill cover looks like chrome, but made of plastic, and when I tried to remove it recently to change the filter, it broke and now has to be replaced. $180, but still cheaper than a new appliance. Wish we could get away from using plastic parts.

Dishwasher Disaster SR# TD729818B M# CDT765SSF1SS - Please, Please, Please, help me to come up with a solution with the issues that have plagued me and my family since we purchased the dishwasher referenced below in the numerous e-mails and electronic correspondence! As I write this E-mail, the GE Assigned warranty repairman has the dishwasher in question torn apart and disassembled for the 3rd time in the last month and half (Please see included photos). A repair I was told was only going to be minutes to conduct has now lasted over 3 hours and caused me to miss a very important appointment. That time frame will go at least another hour if the repair is even possible? Not to mention that a dishwasher that has been used less than 25 times has once again been torn apart and reassembled. I dont care how well built they are, this in my mind affects their performance!The repairman from JK Appliance has spent at least 12 man hours of repair time on the dishwasher, made a half dozen calls to your tech support (check your records), and has never spent less than 4hrs here on a visit. Once again, I have to be here for those visits (time out of my day) plus the stress of watching a brand new $1600.00 dishwasher dismantled time after time! At what point does G.E. make a decision that the amount of money being spent to repair a defective machine is not worth it?? I have to believe that 12hrs of repair time plus an hour of travel time for three separate visits each way, has already added up to the price of a new/replacement dishwasher?The other two G.E. appliances (microwave/Gas Stove) purchased with our remodel last year have performed flawlessly and we are happy with them. However, the trouble with the dishwasher has soured us on ever considering G.E. again! I plan on sending this E-mail and attachments to every consumer/watchdog group (Consumer Affairs) that Im aware of and to the store (Lowes- Farmington N.M) that the appliance was purchased at. This is not meant to be a threat, Im just at my wits end as to how to get to the end of this long tortuous journey that a simple appliance has caused for me and my family. Yes, there are certainly more pressing problems in the world, but right now this is the one that is currently affecting my family and the happiness in our home!Please advise if there is another route that I need to go with this problem including any alternate points of contact (GEs Escalated Issues department). My phone number is ** and maybe a simple personal call of apology from someone at G.E. explaining what my alternatives are would be considered? Thanks for your time and consideration.

We have an overhead microwave that fits nicely into the spot. The power level seems to have dropped off, but this is after more than 8 years with lots of daily usage.

I cant remember the exact date of purchase for my GE Spacemaker microwave oven. I have a receipt somewhere, but I have receipts for repair dated 2002. It is for a door seal gasket for the microwave. A model JVM60 GE Spacemaker installed over the range.The microwave worked perfectly for several years. Then one day, when I pressed the start button, I noticed a small fire inside the window above the control panel where the time is displayed. I called repair man; I was told that it was the circuit board, and GE was not able to send repair spare part. Since then the microwave is only good for displaying the time, and storing my everyday pan. I do remember paying $400.00 for this microwave because I purchased it at my employment. It would seem to me a company making a $400.00 appliance would be backed by a circuit board, which they know would go bad in a short time. Thats why they only had a one year warranty guarantee.To show you the difference in a microwave appliance, I purchased a small counter top microwave in 1997; it still works like a charm, and I use it every day. From the negative reviews I read on these Spacemaker microwaves, I firmly believe there should be some compensation to us consumers for the money spent, plus the hazards we experienced. If that is not agreed, then all of us consumers should file a class action suit against GE.

I bought one of the microwave ovens with two metal shelves. I found that the shelf in the middle of the oven was in the way and I removed it years ago, but left the top shelf in the unit. The other day, while cooking in the microwave it started to spark at the point where the shelf sat on a small clip. The inside of the oven is ruined. Why would anyone put metal shelves inside a microwave? Im just lucky that I was nearby and able to stop the fire before it destroyed my kitchen.

I love the way the dishwasher is so quiet and cleans the dishes well. However, they are ALWAYS WET. A repairman came and told me that I could not expect the dishes to be dry on the light cycle with the POWER DRY. He told me I have to wash on the normal cycle. I did that and they are still wet. He came back out again and basically had no viable explanation. I have to have a dish towel in hand to dry the dishes as they come out of the dishwasher. I paid a lot of money for what I consider the piece of junk that is sitting in my kitchen. I will never again buy a GE PRODUCT.

GE microwaves are crap. In fact its not restricted to microwaves. Its their ENTIRE line of appliances. They team up with other grade e or f manufacturers for appliances (ie: LG, Samsung) and ANY GE appliance is almost guaranteed to fail prematurely. I see all these comments bucking Malaysia and in all reality the fact remains that Malaysia makes damn good stuff (think SONY). But it is the COMPANIES that build the products and how much theyre getting paid that factors quality. No doubt that GE is using the bottom dweller rejected off the assembly line parts to build their units. Most are Chinese garbage. China also builds some very reliable products but as the saying goes dumb American will buy anything. They save the best for them and sell us the crap.It is the lowest grade of those already should have been scrapped at the factory parts that GE passes off as quality and they do a good job at showing it. A cheap 30 dollar China made Emerson microwave made by Daewoo (Korean company that actually is decent) lasts longer and takes a hell of a beating compared to the overpriced rejected junk we call GE. The GE ac units are another classic example of pure garbage. Sadly the older GE works forever. That should sum it up. Why didnt the GE executives while visiting Thomas Edisons grave make every effort to step away from his grave and not stand upon it? Because Thomas Edison would pull them under.

My microwave also began peeling under the glass within a few years after we purchased it. I contacted GE and they claimed they never heard of that type of complaint before and there was no recall. I knew it could not be just my appliance that was doing this. It is peeling A LOT under the turning dish, but unfortunately I cant afford to buy another oven/micro appliance now. When I can IT WILL NOT BE A GE!!!

We purchased the suite of Cafe appliances. After one year of service, out of warranty of course, the touch pad on the microwave quite working. The touch pad on the dishwasher has several lights that do not work. These products are insanely inferior. If you are considering purchasing, I would buy anything but GE.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

GE MICROWAVE OVEN MODEL PVM 187osmcoz PROFILE over the range. This is the first time we have purchased an extended warranty. It was purchased October 2010. On December 6 2010, the whole unit was replaced. Then little things continued to occur. The fan would start to run continuously. The circuit board was replaced. That lasted for several months. Then another circuit board was replaced. Less than two weeks ago another circuit board was replaced. Last night at dinner the unit began acting up again. This unit is out of commission for almost a whole week after every break down as we wait for parts. While waiting for parts on Jan 24 2012 we bought a Sunbeam Microwave for $39.95 as a back up. I placed it in service today, Jan 29 2013.

First off: GE doesnt make some parts for this model anymore. The unit is large compared to many others; the upper tray provides adjustable height; one of the set of spikes in the upper tray rusted out because of inadequate plastic coating, and no replacement was available from GE; the control panel on the top edge of the door failed within warranty period and was replaced free; the holes in the rotating arms that spew water upwards onto the dishes must be cleaned with tweezers to remove bits of paper from labels. Those are all the negatives. The positives are that it is very quiet; a cycle takes about an hour; it cleans dishes well so long as they are not hidden from the water jets; pre-rinsing can help but is not necessary. I would buy it again.

Emptying out the dishwasher I purchased in October 2016 is a cause for rage these days. Dishes, glasses, silverware, etc...come out of any wash cycle dirtier than they went in, though I have tried everything I can think of to see if anything at all can make it better. I purchased the dishwasher from BEST BUY. Little did I know, they dont take anything back after 15 days of purchase. They promptly referred me to GE. In turn GE reps said that their warranty only covers REPAIRS for the first year. In short, sucker me who spent near to $600, is stuck with a VERY BAD product from the moment I paid for it. And there is nothing I can do about it!!! GE IS CLEARLY SCAMMING ITS TRUSTING CUSTOMERS!!! I have been robbed!!!

My GE model JEB1095BB04 microwave/convection oven is 6 years old and the magnatron has failed twice. The first time, GE said they would replace the part free of charge, but I had to pay for the service call, which I did and it cost me $212.00. Now, the part has failed again, the second time in 2 years, and GE basically said you lose. A rep from GE told me that they only guarantee their products for 1 year. There is no doubt in my mind that all GE products are garbage and I would strongly discourage anyone from buying them. I will gladly take my GE microwave, smash it into pieces and replace it with a KitchenAid appliance, which is backed by a reputable company.

I pushed the oven cleaning button. After about 2 hrs I noticed smoke coming from the stove and the island where it is installed. The door would not open and the oven just got hotter and hotter and smoke was filling my house. I called 911 and they sent the fire department. After disarming the breaker, they removed the stove. I purchased the stove in 1996 but only used the auto oven cleaner a few times. The model # is jsp40 and serial # TR244121R. If I had not been home my house would have burned. GE you should do something about this situation. I have no receipt or order #. I purchased it too long ago.

So I was forewarned by my family of nightmare experiences they had with GE appliances over the course of the last 50 years of our family. I just bought a home with 2 GE dishwashers that are both under 5 years old, and both are malfunctioning terribly. The one has leaked from the bottom and created severe water damage, and the other will not drain. Just an affirmation of the bad experiences my family has had in the past. Cheaply made, and often the go to appliances installed in manufactured and new homes. Had a service technician come out after speaking with GE on the phone and they assured me it was cost free. After the technician came out and told me I was being billed $105 for the call, and it would cost an additional $255 to fix the washing machine. The tech was not very friendly or helpful, and his only concern was collecting the bill. Avoid these products!

Slightly more than one year, I purchased a model GLD4404RCC dishwasher about which I have made complaints in the past, concerning poor washing performance and which you chose to ignore beyond attempting to tell me how to use it. Now, this Chinese-made piece of junk has begun to give different problems. Upon completion of the wash cycle, it starts to make a lot of noise and will not shut down. I must do this manually. Guess what? It has waited less than two weeks after the purchase date to do this, meaning it is out of warranty. We have just purchased a new home and will be needing new appliances such as dishwasher, refrigerator, washer and dryer, and a water heater. It will not be GE. I shall never purchase any more of GE products as the whole company stinks.

Our GE microwave stopped working after about 7 months of use. Ive never had a microwave break down on me before. Ive owned other brands which Ive used for years, actually lasted over 10 years. The only reason we purchased the GE microwave was because our old microwave was too big in size. I called GE for warranty service and it was very much of a hassle just to make the appointment. I had to call several times because a customer service representative misinformed me. It took a couple days just to set up a service appointment.Ive told the representative that the microwave stopped working and will not power back on again. The representative told me that the fuse probably went out. Something must have blown out. Finally, the appointment was made for about a week later, which was the earliest time available. It is so inconvenient not to have a working microwave even just for a day. Anyhow, the service tech came about two hours late. The scheduled time was for 8am-12 pm. He showed up close to 2pm. A family member was waiting at home all day because of this. Then the service tech told us that he needs to order a part for the microwave and that he will return a week later to repair the microwave.A week later, he didnt show up. No one even called. So I called back GE and found out that the appointment has been postponed! So now, we have been without a microwave for about three weeks. I think this is ridiculous. Im pretty sure that this is a common problem with GE microwaves and they already had an idea why the microwave wasnt working. It doesnt power-up! Now they are telling me that they dont have the part/s in stock? If I had known that we had to invest so much time and go through so much hassle from the get-go, I would have just purchased a new microwave three weeks ago. GE should pay me for all the time Ive wasted!

I recently purchased a GE Profile 1.9 microwave oven from Home Depot less than a year ago. Last week I went to remove something that I had cooked and went to close the door and it would not stay shut. I ended up getting some masking tape to try and tape it shut in order to keep the light from staying on and burning out until morning when I could get a better look at it, thinking that it had to be something small that could be taken care of without any problem. Hinge adjustment, something getting in the way that I couldnt see, etc, etc. Wrong! I have been over this door with a fine tooth comb and there is nothing that I can see that is preventing it from staying closed, not only that but according to everything that I have read, I am very lucky that I didnt get fried while trying to figure out if the latching mechanism was functioning correctly. I am not even going to go through the long drawn out process of dealing with GE over this due to the simple fact that I have been there done that with my dishwasher that showed up with the front panel dented a few years back from the factory and I ended up blaming the place that I had purchased it through instead of GE and have since found out by reading other complaints that this seems to be something that is not unusual when it comes to GE appliances. I spent over 1100.00 dollars on the dishwasher and they only replaced the panel instead of giving me a new one, and I have never been satisfied with the way that it operates, and it was a very long and drawn out process and I am just not willing to spend the time again on another one of their products. It is unfortunate that we have entered a time where customer satisfaction means nothing, and the days of caring about having repeat business from a satisfied customer are over. The prices continue to rise on the things that we have become to depend on and cant seem to live without, but the quality and workmanship have not only diminished but also present safety threats. I will never purchase another GE anything and I am looking forward to the day when we all have finally had enough of this and do something that makes these companies stand behind the products that they sell and quits ripping the consumer off. Its rampant across the board no matter what you buy, and there should be laws in place in order to keep it from happening. We have laws for everything else, why not have a couple that protect the consumer and their pocket books.

To inform others that need an under-cabinet space-saving microwave, unless you are replacing an existing GE unit (and want the mounting brackets to align for easy re-installation), I would strongly suggest getting a different unit. I am about to buy my third GE undercounter microwave for the past 11 years. The rest of my kitchen is pretty high-end Thermadore, Kitchenaide, ASKO, and Braun. My last Profile PEM 31 DMBB lasted less than three years. The Toshiba that I bought while deployed to Okinawa lasted 15 years.

A few years ago, I purchased a brand new GE microwave oven. A week ago the microwave oven stopped working. I contacted an Appliance Repair company for repair. When the tech came & disassembled the microwave oven, he discovered pliers inside the oven. We took pictures of it (BTW, it wasnt the cause of the problem). I contacted GE to alert them of this & they told me that the robots that assembled the microwave oven probably dropped it in there. Then they said they will send a tech to my residence to investigate. I told them that the pliers was removed & the microwave oven is fixed & assembled. Nonetheless they sent a tech anyway. I told the tech what his Customer Service said & he said he wasnt surprised about the tool being inside an appliance from GE & GEs response. In summary, I would not recommend purchasing any GE products. They proved their products are a safety hazard & they dont care about the consumer nor their safety. All they care about is taking your $$$.

Microwave Model JVM1750DP2bb defective construction- Plastic is protruding inside the Oven. Took possession of a new home in January 2014, but only occupied part time. I estimate we had the equivalent of 6 months being occupied. In January 2017 the magnetron broke down, at which time I noticed a piece of plastics protruding inside the microwave through a vent hole on the Magnetron side. I did not take the extended warranty and GE only offered to send a repair man. Since this is an over the stove model venting outside, it had to be repaired or replaced. Checked with the supplier and they estimated a minimum of $ 300 repair cost. Home Depot had model JVM6175DKBB on sale for 249.00, and with delivery, and installation, were talking $ 350.00 to $400.00 to replace. I got in touch with GE Consumer Affairs, and they did eventually agree to provide the JVM6175DKBB for $ 270.00 including installation. They will take possession of the old model, so there wont be any way for me to confirm or deny a manufacturing defect.

I purchased a GE microwave, model LVM1750DPWW, in 2012. It was delivered approximately 12/6/2012 and was installed in July 2013 after our kitchen remodel was complete. In March 2014, my daughter was warming something on the rack when the back upper rear hook started sparking and caught fire. I am thankful the only damage was to the microwave and to the smell in the house for a few days. When I called Lowes and GE, they act like theyve never heard of this issue. Yet, I see many other complaints of the hooks catching fire. Just to be sure, I turned on the microwave again. The hook started sparking immediately. GE sent a repairman to the house who told me that GE ought to let people know not to leave the racks in the oven. Since she was cooking on the rack, it would be difficult not to have the rack in the oven. He said the oven was a safety concern, could not be repaired and that GE would bring out a new microwave and install it for me. Great! I was pleased - yet concerned. A couple days later, I received an email from GE customer service saying that we had put the rack in the oven incorrectly. There is NO way to have put it in incorrectly. Besides that, he couldnt have seen if this was true since the hook was burnt and melted. I am pretty angry.

The GE dishwasher does a good job of cleaning the dishes however we have had to replace the door gasket on 2 occasions because of door leaks caused by the bottom tray catching on the gasket when pulling the tray out to load dishes and it pull the gasket off the door.

Bought a PDT845SSJ2SS in June. Two months later, it has a leak. Good news, has a leak detector which shuts down the machine. Bad news is that it leaks and the leak detector worked! Called GE. We dont have an authorized service technician in your area. We will get back to you within 3-5 days. Three days later, after I had raised rain with my appliance dealer, he arranged for a local dealer to come look at the machine. Scheduled that appointment - it was Friday, and We only come to your area on Tuesdays and Thursdays. Next Tuesday is booked, so we will try for Friday. Then, someone from an organization called Platinum Services calls and says GE has assigned the ticket to them. Shes going to try to schedule a diagnostic appointment in the next 7-10 BUSINESS days. Told her to forget it (found out she was calling from Lowes and had to find a technician before she could schedule.) End of week 1. Following week, someone else from GE calls and asks if I was cancelling my service request. In the course of the conversation, she asks to confirm the model GE RANGE that I have. Kinda lost it on her... On Thursday serviceman from local dealer comes. Turns on the dishwasher - it leaks exactly where I had said it would. Need to order a part and GE will not expedite. End of week 2. Next week - crickets. Nothing, Nada, mushroom mode (in the dark and being fed BS). Called my appliance dealer today and told him to come pick up the dishwasher - says he cannot do that. I explained, “I will forfeit the money I paid - I dont want a dishwasher that leaks in the first two months of use.” He tell me GE released the part yesterday...whatever THAT means and he HOPES repairman will come next Tuesday to repair. So, I have had a new GE dishwasher for 3 months and it has only worked for 2. Be aware! I assume partial responsibility for this goat rope - I faithfully refer to Consumer Reports when purchasing appliances and electronics. I suggest you do the same... you will find GE listed AFTER BOSCH, KITCHENAID, KENMORE and others. Also, realize the GE brand is now a CHINESE company. Caveat Emptor!

Absolutely silent! Several features and cycles such as crystal, normal, pots and pans and drying options such as air dry or heat dry. Standard size dishwasher. The key is in the loader. Stainless steel with no handle or anything plastic. Flush. Stainless interior as well. It did have a food disposal but to avoid smells since we start the dishwasher only twice a week, we rinsed off our dishes. Another important element we learned from the previous dishwasher is to use the heat dry if you want your load to be dry with as little puddles of water as possible.

We have had GE come out to our house 8 times and even our same repairman admits this product is a lemon, but he is not allowed to say it to get us a new one. The company wont let him! Our dishwasher never has cleaned dishes properly and it has leaked over 10 times! It floods our kitchen, hallway, and basement. We had to rip the carpet off our stairs and now the water is ruining the drywall! We just video recorded it leaking and running under our refrigerator, down the basement stairs, and soaking our storage! We are currently calling our lawyer to get something done about this! GE never stands by their appliances!

My GE microwave is the Advantium version which’s heats to a 1000 degrees. In fact, today the 4th of July I will be using it instead of the BBQ. I have baked, broiled, heated and other things in this unit. This is my 2nd one over the years and I enjoy it immensely.

We have a full size counter top GE microwave. It is about 3 years old and there have been no problems. Our last microwave was also a GE and it lasted about 15 years before it started to suffer from occasional electrical arcing inside, while in use. We simply stopped using it and after reviewing all models, chose to buy another GE and it has been great. We have an over the range micro at our summer home - a Frigidaire and not as good. Our research shows it will likely fail long before the GE.

I wish I had seen this site first. I purchased a dishwasher. It didnt even make it 6 months. Took a month to fix and then 3 months later broke right before Thanksgiving. It is now Friday before Christmas still not fixed. GE is closed. The repairman and GE both lie and said it would be fixed before Christmas. Do not purchase anything GE. They do not stand behind their products. The products are poorly made and dont last. Ive had several dishwashers over the years. This is the first GE and it will be the last. You will have to wait over an hour for on hold to reach anyone and even then they just dont care. Save your money. Buy a didnt brand.

Our dishwasher has gotten very warm mid-cycle and now trips the breaker in the house each time we run the cycle. The problem became evident in April 2012. We have called in a GE repair person to fix it and they said it was a heating issue and not repairable. We have not used it since, but have not replaced it with a new one yet. In August, we read about the recall of a similar model number manufactured within same time frame. Our machine model is PDW7300J03WW, the recalled model is PDW7. Our machines serial # is **. Strangely, the serial number is not listed in the recall, even though symptoms are exactly the same!We have called GE Consumer Affairs at 1-800-386-1215 four times, the most recent today, 9/14/2012. Each time we call, we are left on hold for 59 minutes only to be disconnected automatically! I am sending a registered letter to GE CA with a copy of this link and intend to contact my local news if I do not receive sufficient response within the week. Does GE need to see an actual fire report from my fire department or worse in order to get their attention to replace the unit? It is disgraceful and extremely dangerous.

GE Dishwasher Model GLD7400R10BB - Remodeled my kitchen about 2 1/2 years ago and replaced all my appliances with GE appliances. I noticed that every now and then my dishwasher wasnt starting or running through a full cycle. I had called the GE repairman because my microwave was not heating up and asked him to take a look at my dishwasher as well. After hearing it was going to cost me $500.00 to fix my still under warranty microwave and the control board was no good and very expensive to replace because my one year warranty had past on my dishwasher, I will never invest in the money hog GE ever again! WARNING... DO NOT BUY GE!

I purchased a GE monogram microwave along with all the other brand new appliances when I remodeled my kitchen. Let me be clear when I say I will never buy another GE product again in my life. Not only is the product inferior but the customer service department is run by a group of very inept people that lack basic communication skills. The microwave I purchased needed two repairs within the first five years of purchase. I have a microwave in my office at work that I purchased over 10 years ago and Ive never had an issue with it. Needless to say, it isnt a GE product. Last April the microwave started acting up again and kept turning itself off. We didnt even bother calling GE because like everything else their repairmen are also incompetent. 1-800-Appliance came out and found that the magnetron needed to be replaced and we should just purchase a new appliance. Because our microwave had been installed in a custom made cabinet and the trim kit was still good, we made the mistake of purchasing the same exact microwave from GE for convenience. This was in April of 2014. Right now I am waiting for a GE repairman to come and take a look at it because it is already not working. This is after I spent an hour on the phone with consumer relations. I will never purchase a GE product again.

We moved into a new home in June of 2011 with the appliances already included. Ours came equipped with a GE, over-the-range microwave, model JVM1540DP1WW, manufactured in Malaysia, in April of 2010. Within several months, the revolving platter began to make a bumping noise while turning and then it eventually quit turning altogether. Five service calls later, we had the platter motor replaced, circuit board and four fan motors (apparently the platter has voltage supplied from that fan to make it run) and it still didnt work.It was taken back to the shop and eventually the problem was traced to a loose wire on a terminal connector. After a month of operation, it is again beginning to make the bumping noise while the platter turns. To top it off, Consumer Reports (the March issue) deals with problematic microwaves, especially the GE model and the unexpected fires that can occur. In addition, they can be susceptible to (not always however and only on certain models) wireless transmissions which could potentially cause them to start on their own. I know for a fact that it knocks off my XM Satellite Radio when it is running. Bottom line...its history and will be replaced with a check rated appliance before I too have a major problem.

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.

No issues yet. But only had for 6 months so time will tell. Read a lot of negative reviews but none here. Bought in Nov ‘18 from Home Depot. Delivered and installed on time. Replaced 13 yr old GE appliances that were still working.

I wasted my whole day waiting for GE Technician to come. Nobody called me to let me know that they are not coming. I have to call them only for a Mr. ** to tell me that they had rescheduled the appointment for another one week without notifying me. Good job that GE APPLIANCES are doing. You remember the so called TOO BIG TO FAIL? It means, they can do whatever they want at whatever time or day they want. I dont have a vent in my house and that means I cant use the stove. Is this ridiculous or I am missing something here? Is it TOO BIG TO FAIL? Yes, I forgot that. I will be staying in a house with a new GE APPLIANCE that has not been working for the last one week and have to wait for another week. Mind you, this Appliance has been used only for barely a month. Is there anybody out there who is facing the same problem or its just me. If there is nobody going through the same experience, an excuse like there are no Technicians available to come to your place and do the job. If there is anybody out there who has trust in GE appliances like I did or even thinking of getting one. Be aware that you will be through what I am going through and there will be no technician available for another two weeks. Be ready to wait for they will reschedule your appointment without letting you know, why? Because theyre TOO BIG TO FAIL. What will you do? Wait until they decide to come, if theres a technician available. I just realized that GE means GO ELSEWHERE. Thanks GE for the good job.

Have used GE dishwashers before - were good. However GE no longer makes them, its just a name - now made by MABE (part of HAIER), Mexican with Chinese ownership, and this new one arrived with a factory fault - cracked tub which leaked immediately. Cracked tub seam and leak found immediately by service tech GEs site referred. Good news is the leak detector worked! Bad news - is we didnt install it right away (old one still worked and pandemic...) so it was a year before we got to it (was partly a gift). So - now MFR Mabe is giving us the run around and so far not doing anything about the faulty dishwasher they mfd and shipped through Home Depot. Dont be fooled as we were - GE is not actually GE anymore and the mfr HAIER/MABE are doing nothing to correct a factory mfg fault.

I moved into our house about 27 years ago, and have had to replace every single appliance except the microwave. The oven, fridge, washer, dryer, dishwasher—all replaced at least one time over. But this 90s GE microwave keeps humming along. I really should replace it just because it is this awful off-white color and everything else in our kitchen is part of a beautiful stainless steel/black/white scheme, but it is actually built right into a cabinet and I fear I will not be able to get another microwave in there. The only gripe I have about its performance is the fan comes on and roars full-blast anytime the stove or oven is on. It is so loud its difficult to talk over.

GE microwave turns on by itself, creating a fire hazard. We could not figure out how our plastic plates melted, until we witnessed the GE microwave turning itself on by itself. Also filed a report with saferproducts.gov. It may have to take a death of a human to have this dangerous product recalled by GE. Great business plan, GE!

I bought a GE microwave in June 2011. Paint started peeling off the inside top soon after purchase. Now, all the paint is gone and GE doesnt care and Walmart wont replace it. So today, I bought a Panasonic. Maybe it will last. Its fifty dollars cheaper, too.

Now out of warranty, my 4-year-old microwave (sadly, the top oven of a double wall oven), has been flaking and peeling paint. It is totally unsafe and unusable.

Figure it out GE! The sixth motor and mode selector for our washer has been reluctantly ordered by a tech this morning. The second motor was installed months after buying the brand new machine. Now, only two months since the fifth motor and mode selector was installed (Dec 2, 2011), the wiring harness is burnt up. The tech recommends replacement of the washer by GE, but only gets push-back from GE. This newest incident included a horrific smell of smoke. I do not trust this machine. I have a wife and child to protect. Think about it - do the math - add your costs for repeated repairs. You do not get to be a company the size of GE by not understanding simple economics. Open your eyes and replace our washer.

My GE microwave also has paint peeling off the top inside and bottom with rust as well. And cannot be repaired but not one person has said they were sorry or even owned up that it is a fault in paint. This is disgusting to think about this stuff falling into your food!!! This is not safe at all and 10% off new unit is not nearly enough considering they are up to $3000.00 now for microwave/oven unit.GE does not stand behind their products and it shows!!!!

We purchased a manufactured home that had brand new, GE appliances in it. We have been in the home for almost two years, but the dishwasher has never worked well, at ALL, even when it was brand new. We called GE and they sent a local appliance repairman to our house. He said that there was nothing wrong with the dishwasher. They are just junk. Amen! I have tried running the water in the sink until it is hot before the dishwasher fills up, we have tried using a citrus additive that is supposed to help it clean better, we have tried several different kinds of soap, NOTHING works. It never gets the dishes clean, there is always residue and food left at the bottom of the dishwasher, and it runs for hours on end. I cant wait until I can get rid of this pile of junk and purchase a Whirlpool or anything else. I will never purchase GE appliances, EVER!!!!

Good dishwasher for the price. Racks are well designed except utensil basket takes up lot of room. Given forks and knife rack at top, basket is not needed. Dishwasher flies at night.

I bought GE Profile dishwasher (PDT750SSFSS) from Home Depot on Sept 2014. First week it had some drying issue and GE service technician told no issue with dishwasher. After 4 months, electronic control board stopped working and GE service technician replaced the board. It worked for about a month and again same control electronic board failed and need to be replaced by GE technician. Again within a week again board failed for 3rd time. This time I asked for a replacement from GE since same board failed 3 times but GE refused to replace and told they can only repair and cannot give a replacement of dishwasher. Again for 4th time same control board failed now and I have contacted Home Depot for help. I dont know what to do this time and I dont want to repair this dishwasher anymore. It is only June 2015 and it had been repaired for more than 4 times. Ill try through Home Depot to get a replacement, if not Im planning to go through consumer court and file case against GE Profile. I would appreciate if somebody can help in resolving this issue and you can contact me through my email.

Periodically my GE Profile Dishwasher will not clean well. On every occasion it is due to clogging of spray ports on the upper and/or lower spray arms. Removing the blockages is nigh-on impossible as it is often not possible to extract the blockage from the outside and its not at all possible to flush the blockage back down the arm to extract it at the centre. All that is required is a bit of forethought and the creation of some access to the arm. I was frankly surprised to not be able to find a replacement arm as the suggested solution to this problem, the additional part revenue being part of GEs the business model. There are a number of other design issues with the assembly at the bottom that make me think it was done by an intern and nobody checked her work at the end of summer break before it went into production.

We bought the countertop stainless steel microwave model JES1142SJ the end of 2010. Noticed a rust ring under the revolving paint about a month ago. The paint was chipped off and when I washed it with a dish cloth, more came off. It is getting worse. We didnt stop using it since it seems it is only coming off under the plate but is it safe to continue using? Could it catch fire? Is it putting bad things in the food we heat in it? Even though it is not an expensive microwave ($100-$125) it should not be rusting inside. It should last longer than 3 years!Sounds like GE will not back up their products since so many microwaves owners are complaining about the paint being inferior and flaking off. There should be a recall for this problem on all microwaves sold by GE. Complaints have been from countertop to the most expensive dual stoves! This is not acceptable and GE needs to step up and deal with the problem with their microwaves that they sell. I usually buy GE; but this is making me have 2nd thoughts and think that my ones I bought in 2010 will be the last purchased from GE.They did come out twice for my range when the oven stopped working at 2 years and one of the eye knobs to turn on and off needed to be replaced when it would not turn off. But a 2 year old stove should not have needed any repairs. I noticed a big difference in quality after I bought this new one when we moved. My old GE from 1996 is still my favorite one and is still working just fine in my sons house.

Our washing machine has been with us for almost ten years and I really love the features which make it look modern and easy to dump in a load when we're running late for something. It has been having problems recently but it still runs okay, with only a few hiccups but for a little over ten years, that's pretty good!