En el negocio desde 1952, Admiral Craft Equipment Corp. es un fabricante líder de equipos, artículos pequeños y suministros para la industria de servicios de alimentos comerciales. Ofreciendo más de 2,000 productos, su misión es proporcionar productos de calidad a un precio competitivo, mientras mantienen un servicio al cliente superior, un envío rápido y una tasa de llenado excepcional. La línea de productos de Admiral Craft está en continua evolución y ahora cuenta con la más amplia gama de productos comerciales para el servicio de alimentos en la industria. Con oficinas y 12 almacenes estratégicamente ubicados en todo el país, Admiral Craft puede proporcionar un envío rápido y eficiente a los clientes, sin importar su ubicación.

Distancia Códigos de error

Problem: The pilot flame can’t be ignited. 
Cause: The gas pressure is too low. 
Solution: Adjust the relieve valve to increase pressure. 

Problem: The pilot flame can’t be ignited.  
Cause: The nozzle is clogged.  
Solution: Unclog the nozzle. 

Problem: The pilot flame can’t be ignited.  
Cause: Connection of the thermocouple is loose.  
Solution: Tighten the thermocouple. 

Problem: The pilot flame can’t be ignited.  
Cause: The thermocouple is defective.  
Solution: Replace the thermocouple. 

Problem: The pilot flame can’t be ignited.  
Cause: The gas control valve is malfunctioning.  
Solution: Replace the gas control valve. 

Problem: It has a light-back sound when the gas supply is turned off.  
Cause: Wrong orifice size for the gas supply.  
Solution: Install proper orifice. 

Problem: It has a light-back sound when the gas supply is turned off.  
Cause: The damper is too open.  
Solution: Adjust the damper. 

Problem: It has a light-back sound when the gas supply is turned off.  
Cause: The gas pressure is too low.  
Solution: Adjust the relieve valve. 

Problem: It has a light-back sound when the gas supply is turned off.  
Cause: Gas pressure too low.  
Solution: Increase the gas pressure. 

Problem: It has a red flame and black smoke.  
Cause: Wrong orifice size for the gas supply.  
Solution: Install proper orifice.  

Problem: It has a red flame and black smoke.  
Cause: The damper is too closed.  
Solution: Adjust the damper.  

Problem: It has a red flame and black smoke.  
Cause: Running out of gas/propane.  
Solution: Replace tank/increase gas. 

Problem: It has a red flame and black smoke.  
Cause: High elevation.  
Solution: Install proper tips for elevation. 

Problem: It has a red flame and black smoke.  
Cause: Bad air/gas mixture.  
Solution: Increase air flow/gas to the unit.

Refrigerador Códigos de error

Problem: Compressor not running. 
Reason: Blown fuse or circuit breaker tripped. 
Solution: Replace or reset circuit breaker. 

Problem: Compressor not running. 
Reason: Unplugged power cord. 
Reason: Plug in power cord. 

Problem: Compressor not running. 
Reason: Thermostat set too high. 
Reason: Set thermostat to lower temperature 

Problem: Compressor not running. 
Reason: Cabinet in defrost cycle. 
Reason: Wait for defrost cycle to finish. 

Problem: Condenser runs for long Periods of time. 
Reason: Excessive amount of warm Products placed in cabinet. 
Reason: Allow adequate time for Product to cool down. 

Problem: Condenser runs for long Periods of time. 
Reason: Prolonged door opening or door left open. 
Reason: Ensure doors are closed. Avoid leaving the door open for long periods of time. 

Problem: Condenser runs for long Periods of time. 
Reason: Door gasket(s) not creating a proper seal 
Reason: Ensure gasket is installed correctly and that it is clean Replace gasket if necessary 

Problem: Condenser runs for long Periods of time. 
Reason: Dirty condenser coil. 
Reason: Clean the condenser coil. 

Problem: Condenser runs for long Periods of time. 
Reason: Evaporator coil iced over.  
Reason: Unplug unit and allow coil to defrost. Ensure that the thermostat is not set to cold. Ensure that the door gasket is creating a proper seal. 

Problem: Cabinet is noisy. 
Reason: Loose parts. 
Reason: Locate and tighten loose parts. 

Problem: Cabinet is noisy 
Reason: Tubing Vibration. 
Reason: Ensure tubing is free from contact with other tubing or components.