Si cocinar alimenta su alma, no solo a sus invitados, solo una cocina BlueStar puede satisfacer. Ellos fabrican cada quemador, dan forma a cada puerta y bisagra, y perfeccionan cada detalle para alimentar su pasión.

Distancia Códigos de error

Problem: Burner will not ignite, no "clicking" sound. 
Reason: No electrical power to the unit. 
Solution: Plug into a three-prong electrical outlet that is properly grounded. 

Problem: Burner will not ignite, no "clicking" sound. 
Reason: Open Burner Models Only: Igniter not connected to lead wire. 
Solution: Check and re-set circuit breaker for the unit. 

Problem: Burner will not ignite, no "clicking" sound. 
Reason: Igniter not connected to the correct lead wire 
Solution: Open Burner Models Only: Connect igniter to orange lead wire. 

Problem: Burner will not ignite, no "clicking" sound. 
Reason: Lead wire is worn on chipped. 
Solution: Connect igniter to the orange lead wire attached to the burner. 

Problem: Burner will not ignite, no "clicking" sound. 
Reason: Lead wire is not connected to spark module. 
Solution: Check for signs of wear or chips. 

Problem: Burner will not ignite - "clicking" sound, but no spark. 
Reason: Gas not turned on, 
Solution: Turn on gas supply. 

Problem: Burner will not ignite - "clicking" sound, but no spark. 
Reason: Open Burner Models Only: Clogged burner ports, 
Solution: Open Burner Models Only: Use a push pin to clear ports. 

Problem: Burner will not ignite - "clicking" sound, but no spark. 
Reason: Venturi tube not aligned with the orifice, 
Solution: Position venturi tube over orifice. 

Problem: Burner will not ignite - "clicking" sound, but no spark. 
Reason: Lead wire is in the drip tray. 
Solution: Attach lead wire to igniter.  

Problem: Burner will not ignite - "clicking" sound, with spark. 
Reason: Gas not turned on. 
Solution: Turn on gas supply. 

Problem: Burner will not ignite - "clicking" sound, with spark. 
Reason: Burner head OR cap not in correct location. 
Solution: Identify burners and move them to the correct location. 

Problem: Burner will not ignite - "clicking" sound, with spark. 
Reason: Open Burner Models Only: Air shutter needs adjustment. 
Solution: Open Burner Models Only: See Top Burner Low Flame Adjustment instructions.  

Problem: Burner will not ignite - "clicking" sound, with spark. 
Reason: Faulty igniter (dirty or cracked). 
Solution: Open Burner Models Only: See Top Burner Low Flame Adjustment instructions.  

Problem: Burner ignites - "clicking" sound does not stop. 
Reason: Burners are wet. 
Solution: Let burners dry and try again. 

Problem: Burner ignites - "clicking" sound does not stop. 
Reason: Burner setting too low. 
Solution: Turn off, re-ignite and change setting. 

Problem: Burner ignites - "clicking" sound does not stop. 
Reason: Air draft flowing over cooktop. 
Solution: Eliminate draft source. 

Problem: Burner ignites - "clicking" sound does not stop. 
Reason: Open Burner Models Only: Electrode wires not properly connected. 
Solution: Check outlet polarity. Plug unit into a three-prong electrical outlet that is properly grounded. 

Problem: Burner ignites - "clicking" sound does not stop. 
Reason: Electric plug not in grounded outlet. 
Solution: Open Burner Models Only: Connect electrode wires.  

Problem: Burner doesn't fully ignite . 
Reason: Partial gas supply. 
Solution: Use a push pin to clear ports. 

Problem: Burner doesn't fully ignite . 
Reason: Burner or burner cap not properly positioned. 
Solution: Make sure gas supply is fully on. 

Problem: Burner doesn't fully ignite . 
Reason: Clogged burner ports. 
Solution: Check that burner or cap is in the proper location. 

Problem: Burner doesn't fully ignite . 
Reason: Open Burner Models Only: Burner head not in correct location. 
Solution: Open Burner Models Only: See Top Burner Air Shutter Adjustment instructions. 

Problem: Burner doesn't fully ignite . 
Reason: Low flame setting needs adjustment. 
Solution: Identify burners and move them to the correct location. 

Problem: Burner ignition delay - "clicking" sound then ignition whoosh . 
Reason: Open Burner Models Only: Air shutter needs adjustment. 
Solution: Open Burner Models Only: Turn burner to LOW setting to ignite. 

Problem: Burner ignition delay - "clicking" sound then ignition whoosh . 
Reason: Sealed Burner Models Only: Knob not in the correct position 
Solution: See Top Burner Air Shutter Adjustment instructions. 

Problem: Lazy flame - floats, larger in size than normal. 
Reason: Low propane supply (for LP users). 
Solution: Fill the propane tank. Turn on/off valve fully to on. See Top Burner Air Shutter or Low Flame Setting instructions.  

Problem: Lazy flame - floats, larger in size than normal. 
Reason: Low flame setting needs adjustment. 
Solution: Fill the propane tank. Turn on/off valve fully to on. See Top Burner Air Shutter or Low Flame Setting instructions.  
 

Refrigerador Códigos de error

The refrigerator makes unusual noises.  The following noises are normal: 
1. Whirring when the fans are operating. When the refrigerator is initially turned on, the fan operates at a higher speed until it reaches the set temperatures. 
2. Rattling during the flow of refrigerant or water. 
3. Clattering when ice is dropped from the ice maker into the stainless steel pan. 
4. Buzzing when the water valve opens to fill the ice maker. 

The refrigerator will not operate. 
1. Confirm the power switch is on. The power switch is located behind the top grille. 
2. Confirm the circuit breaker and electrical power to the refrigerator are on. 

The lights are not working. 
1. Verify the doors are closed. If the doors were left open, the lights turn off after ten minutes to eliminate excess heat.  

The refrigerator seems to run too much or the temperature is too warm. 
1. If a large amount of food was added, the doors were opened frequently, or the doors were left open, the compressors and fans will run to maintain the set temperatures. 
2. Verify the doors are closed or closing properly. 
3. Confirm there are no tears in the gaskets. If there are tears in the gaskets, call customer service at (877) 427-3290 to schedule a service call. 
4.  Confirm whether the room temperature is hotter than normal. Increased ambient temperatures may cause compressors to run longer. 

There is condensation, frost, or ice on the inside of the refrigerator and/or freezer. 
1. Verify the doors are closed. 
2. Confirm there are no tears in the gaskets. If there are tears in the gaskets, call customer service at (877) 427-3290 to schedule a service call. 

The ice maker is not making ice. 
1. Confirm the ice maker setting on the electronic control is on and the bale arm on the ice maker is in the lowest position. 
2. Replace the water filter. 
3. Confirm the ice maker has been on for at least 24 hours. 
4. Verify the freezer temperature is 0°F. 
5. Confirm the water to the refrigerator is turned on. 
6. Confirm an ice cube is not stuck in the ice maker. When ice cubes are ejected from the ice maker, a cube may get stuck. 
7. Confirm there are no kinks in the household water line. 

The ice is sticking together in the ice bin. 
1. It is normal for ice to stick together if it has not been used frequently. Empty the ice bin. 

The ice has a bad taste and/or odor. 
1. Throw away the ice if it has not been used in a long time. 
2. Clean the freezer compartment. 
3. Verify the water filter has been replaced and installed correctly. 

The refrigerator has an odor. 
1. Replace the air filter. 
2. Confirm food is adequately covered as uncovered food could create odors. 
3. Clean the refrigerator thoroughly.