Si está buscando ayuda para arreglar su Dishwasher Cove, ¡no busque más! Nuestra guía completa de códigos de error del Dishwasher Cove explicará problemas comunes, brindará consejos y le mostrará cómo leer los códigos de error de su modelo.

Code: 600151. 
Fault level error has occurred. Software or hardware loading error. Diverter valve: unexpected home detected. 
Cove Dishwasher error code 600151. DW24 shows EC 600151. Cove Dishwasher "Call Service, Code #600151" appears on the display. Display says Call Service but cannot clear it. Dishwasher error will not clear. 
Turn the home circuit breaker to the unit off for 30 seconds then back on again. Retest the unit operation. 

Code: FE1 - No Water or 560187. 
Cove Dishwasher error code 560187. DW24 shows EC 56 01 87 on display. How to repair error 560187. Check Manual, Code #560187 message on DW24 display. 560187: no water supply to unit. FE1: No water supply to product. 
FE1: No water supply to product. 
Error 560187 appears within the first three minutes of the cycle if water is not supplied to the dishwasher. Verify the water supply to the unit is turned on. Turn the home circuit breaker to the unit off for 30 seconds then back on again. Retest the unit operation. If these troubleshooting steps do not resolve the issue, service is necessary to expertly diagnose and repair the product. Contact Factory Certified Service to schedule an appointment for repair. 

Code: 800140. 
DW24 shows EC 800140. 80 01 40. Dishwasher does not drain. MOT4: Drain pump has been on too long while draining, or the secondary pressure check cannot resolve any draining issues. 

Code: 560186. 
Check manual, Code #560186. 
Verify water supply is in the on position. 
Verify water supply line is not kinked. 

Code: 600148. 
Call Service, Code #600148", #600149, or #600151 appears on the display. 
Contact Cove Factory Certified Service. 

Problem: Dishwasher does not operate. 
Verify power is on. 
Verify electrical power to dishwasher and home circuit breaker is on. 
Verify the child lock, Sabbath feature, and showroom mode are not turned on. 

Problem: Dishes are not clean after the wash cycle. 
Verify hot water supply. 
Verify spray arms turn freely by turning by hand. 
Verify dishes are not placed too close together and cups and bowls are face-down and are not nested. 
Contact Cove Customer Care at 800-222-7820 for recommendations. 

Problem: Dishes are not dry after the wash cycle. 
Verify there is rinse aid in the dispenser (even if the detergent includes rinse aid). 
Select a wash cycle other than Quick or Light, which have limited dry time. 
Turn on Extra Dry and/or Extended Dry. Refer to Cycle Options. 
Increase the rinse aid dosing. Refer to User Setup. 

Problem: Excess moisture on the tub at the end of the wash cycle. 
Verify there is rinse aid in the dispenser (even if the detergent includes rinse aid).

Páginas de códigos de error relacionados:
Cove Lavaplatos Códigos de error,

Páginas de resolución de problemas relacionadas:
Cove Lavaplatos Solución de problemas,

Páginas de reparación relacionadas:
Cove Lavaplatos Refacción,

Páginas de piezas relacionadas:
Cove Lavaplatos Partes,

Páginas de precios relacionadas:
Cove Lavaplatos Precios,