Hisense, Your Reliable Partner. Aspiring to become the most reliable brands in the world with more than a century of brand heritage, they aim to continually pursue scientific and technological innovation in hopes to improve overall quality of life and bring happiness to millions of families.

Distancia Reparar

Hisense Oven is not heating 
Igniter. The igniter is the most commonly defective part for an oven, not heating. The igniter has two main functions. First, the igniter draws electrical current through the oven safety valve to open it. Second, the igniter gets hot enough to glow and ignite the gas in the oven burner. If the igniter gets weak, it will fail to open the safety valve correctly. If the valve does not open, the oven will not heat. To determine if the igniter is defective, observe the igniter when the oven is on. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. If the igniter is weak, replace it. If the igniter does not glow at all, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it.

Hisense Oven doesn't bake evenly 
Bake Element. If the bake element is burned out, the oven will only be heated by the broil element. This will cause the oven to heat unevenly. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Hisense Oven broiler not working 
Broil Element. The broiler element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.

Hisense Stove heating element not working 
Surface Element Board. The surface element board has relays that regulate the power supply to the burners. If one or more of the relays fails, the surface element won’t work. If two or more burners fail at the same time, this indicates that the surface element board is likely at fault. If only one surface element won’t work, use a multimeter to test the element for continuity. If the surface element has continuity, the surface element board might be defective.

Hisense Stove burner won't light 
Spark Module. The spark modules provide power to each surface burner spark electrode. If the burner produces a weak spark, or if the burner sparks intermittently, the spark module might be defective. Before replacing the spark module, first, check the spark electrode and the spark wire. If the spark electrode and spark wire are not at fault, the spark module is likely defective. If the spark module is defective, replace it.

Hisense Oven temperature is not accurate 
Bake Element. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Hisense Oven light is out 
Light Assembly. If the oven light is out, the entire light assembly may need to be replaced. Often the light assembly components are not sold separately.

Hisense Oven won't turn on 
Bake Element. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Hisense Oven is not self-cleaning 
Door Lock Motor and Switch Assembly. During the oven's self-cleaning cycle, the door lock switch activates the door lock motor to prevent the oven door from being opened. If the door lock motor and switch assembly are defective, the oven door will not unlock once the self-cleaning cycle is complete. On most ovens, you can open the oven door by removing certain screws or panels. Check your owner's manual for further instructions. 

SOURCE: repairclinic.com

Lavaplatos Reparar

Hisense Dishwasher Won’t Drain
The dishwasher runs the full cycle but when you open the door, there is water sitting at the bottom. Why will the Hisense dishwasher not drain?
The Hisense dishwasher won’t drain if the drainage pump is blocked. Open the coarse and fine filters. Remove the drainage pump stop. Turn the pump wheel by hand and remove any items blocking the pump.
It can be scary when you see water sitting in the bottom of your dishwasher but it’s no reason to panic. Oftentimes the fix is a simple one.
The dishwasher relies on a good drainage system to remove water. If there is a clog or kink in the drain hose, the water cannot drain out of the dishwasher. If food or other debris is blocking the drain pump itself, water will remain in the dishwasher.
The dishwasher will not drain if it is not level. If the dishwasher has been moved, use a level to see if the dishwasher is level. You can adjust the dishwasher’s level by twisting the feet underneath the dishwasher.
Depending on the location of your dishwasher, you may need to pull the dishwasher out from the cabinet. Tilt the dishwasher to gain access to the two front feet. The rear foot is located in the center.
Adjust the feet by either screwing or unscrewing the 2 front feet to the desired height. The rear foot can be adjusted by adjusting the screw in the middle, centrally located at the bottom front of the dishwasher.

Hisense Dishwasher Turns On But Won’t Start
The lights on the dishwasher control panel are on but nothing is happening. Why does the Hisense dishwasher turn but won’t start?
If the Hisense dishwasher turns on but won’t start, make sure the door is securely closed and latched. Inspect the rubber seal along the door to make sure there is no food or other debris preventing the door from having a tight seal.
The rubber seal along the dishwasher door is often overlooked when we are inspecting the dishwasher door. Wear rubber gloves and use a soft cloth to clean the inside of the seal.

Hisense Dishwasher Not Turning On
When you press the start button on the dishwasher you expect to hear water running. But that’s not happening. Why is the Hisense dishwasher not turning on?
If the Hisense dishwasher is not turning on, make sure the dishwasher is receiving adequate power. Plug a small lamp or other appliance into the same outlet and see if it works. Check the circuit breaker to see if the breaker has tripped.
Power supply issues are the most common reason why a dishwasher will not turn on. If you have verified there is adequate power being supplied there are some other areas to troubleshoot. 

Hisense Dishwasher Not Drying/Heating
You open the dishwasher door expecting to get a burst of steam in your face but there’s nothing. The dishes are clean but they are not dry. Why is the Hisense dishwasher not drying/heating?
If your Hisense dishwasher is not drying/heating, the heating element could be defective. Inspect the heating element for signs of damage or burned-out areas. Use a multimeter tool to test the element for continuity.
Newer dishwashers may not have a heating element at the bottom of the dishwasher. Many newer models use a heated rinse at the end of the cycle. The dishes are coated with hot water and then the cool, stainless steel interior draws the water off the dishes.
This method of drying works but it doesn’t work the same on all dishes. Plastic dishes will not get completely dry. Condensation drying also poses a problem if you are in the habit of stacking too many dishes in the dishwasher.
Depending on the model of the Hisense dishwasher you have, the heated rinse cycle may not automatically start at the end of the wash cycle. You will have to manually press the heated rinse button.
Another way to help your dishwasher dry the dishes better is by using rinse aid. A rinse aid has ingredients that help water roll off the dishes.

Hisense Dishwasher Keeps Beeping
Does your Hisense dishwasher keep beeping? The reason why this is happening could be due to a simple problem.
If the Hisense dishwasher keeps beeping, make sure the door is securely shut before starting a wash cycle. Inspect the spray arms to make sure they can rotate freely. The dishwasher will also beep if there is no detergent.
There are a variety of reasons why a Hisense will beep. The beeps are how the dishwasher communicates when something needs attention.
A common reason for the dishwasher to beep continuously is if the dishwasher has experienced a surge in electricity. The surge in electricity will overwhelm the dishwasher’s control board.
Unplugging the dishwasher for 10 minutes will allow the excess electricity to drain off. Plug the dishwasher back in and see if the beeping has stopped.

Hisense Dishwasher Door Will Not Close
You keep shutting the dishwasher door and it keeps opening. Why will the Hisense dishwasher not close?
If the Hisense dishwasher will not close, make sure the dish racks are positioned correctly. Dish racks that protrude out of the dishwasher will block the door. Dishes that are stacked incorrectly, too high, or too tightly, can prevent the dish racks from sliding back in place.
Dishwasher doors are not complicated but they do have several working parts that all need to work together. Here are the most common culprits when the dishwasher door will not close.

Hisense Dishwasher Not Cleaning Properly
Dishwashers are designed to efficiently clean our dishes. So then why is the Hisense dishwasher not cleaning properly?
If the Hisense dishwasher is not cleaned properly, the interior of your dishwasher may be dirty. Pour 3 cups of distilled white vinegar into the bottom of the dishwasher. Run a full wash cycle. The vinegar and hot water will remove hard water, soap scum, and other food bits.
Newer models of dishwashers have a removable filter that collects food and other debris so it does not become trapped in the drain pump or hose. Remove the filter and wash it with warm soapy water. Use a brush to remove any food that is stuck on the filter.

SOURCE: readytodiy.com

Refrigerador Reparar

My Refrigerator's Not Cooling
The condenser coils are usually located under the refrigerator. They dissipate heat as refrigerant passes through them. If the condenser coils are dirty, they won’t dissipate the heat effectively. As debris builds up on the coils, the refrigerator becomes less efficient, causing the refrigerator to work harder to cool down. If the coils are significantly dirty, the refrigerator will not be able to maintain the proper temperature. Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them.

Refrigerator not defrosting
The defrost control board determines how often to run the defrost cycle. If the board fails, the refrigerator will not go into the defrost cycle. Before replacing the defrost control board, first, test the defrost heater and defrost thermostat. If the defrost heater and defrost thermostat are working properly, the defrost control board is likely defective.

Repair Help for a Noisy Refrigerator
If the refrigerator is noisy or loud, especially when one of the doors is opened, either the evaporator or condenser fan blade may be at fault. First, check out the evaporator fan blade in the freezer behind the back panel. Try turning it by hand. If the fan blade does not turn freely, check to see if the blade is rubbing against something or if something is caught in the blade. Additionally, check the condenser fan blade in the back underside of the refrigerator to determine if it has any obstructions.

Refrigerator water dispenser not working
To determine if the water supply tube is frozen, disconnect the tube at the bottom of the door and blow air through it. If air does not pass through, this indicates that the water supply tube is frozen. If the water supply tube is frozen, thaw it out. In addition, ensure that the freezer is kept at the proper temperature. The freezer temperature should be kept from 0-10 degrees Fahrenheit. If the freezer is too cold, the water line may freeze.

Refrigerator ice dispenser not working
The dispenser control board governs most of the functions of the dispenser system. If the control board is faulty, it may stop supplying power to the entire dispenser system. If only one dispenser part is not working, test each of the dispenser components before testing the control board. It is more likely that a single part has failed. If the entire dispenser system is not working, the control board is more likely to be at fault.

Refrigerator ice maker not working
If the freezer temperature is above 10 degrees Fahrenheit (-12C), the ice maker will not produce ice cubes efficiently. The freezer temperature should be set between 0 and 5 degrees Fahrenheit (-18 to -15C) for the ice maker to work properly. If the freezer temperature is too high, ensure that the condenser coils are clear of debris and the condenser fan is working properly. In addition, check to see if frost has accumulated on the evaporator coils. If the evaporator coils are frosted over, part of the defrost system has likely failed.

SOURCE: repairclinic.com