Tipos de aparatos


Marcas de electrodomésticos


Categorías de artículos


Más artículos


Westinghouse Calentador de agua Solución de problemas
Westinghouse Calentador de agua Solución de problemas

Westinghouse Calentador de agua Solución de problemas

Si busca ayuda para arreglar su Westinghouse Calentador de agua, no busque más! Nuestro integral Westinghouse Calentador de agua La guía de solución de problemas explicará problemas comunes, brindará sugerencias y le mostrará cómo leer los códigos de error de su modelo.

No hay corriente eléctrica en el calentador de agua
1. ¿Está el enchufe del cable de alimentación desenchufado de la toma de corriente? Vuelva a colocar el enchufe.
2. ¿Está disparado el disyuntor de 10 amperios del panel eléctrico? Restablezca el disyuntor.
3. ¿Está bien el fusible de la placa de circuito? Si el panel de la pantalla está en blanco, desenchufe la unidad o póngase en contacto con un técnico de servicio autorizado.
4. ¿Hay un corte de energía en la casa? Póngase en contacto con la compañía eléctrica.

No hay agua disponible cuando se abre un grifo
1. ¿Está cerrada la válvula de suministro de agua en el contador (funcionan los grifos de agua fría)? Abra la válvula de suministro cerrada.
2. ¿Está abierta la válvula de suministro de agua cerca de la unidad? Abra la válvula de suministro de agua.
3. ¿Está congelada la tubería de agua? Apague la unidad, cierre todas las válvulas de agua y la válvula de gas. Póngase en contacto con un técnico de servicio autorizado.
4. ¿Está parpadeando un código de error en la pantalla (fuga detectada)? Consulte la información sobre el código de error y póngase en contacto con un técnico de servicio autorizado.

El agua caliente no está disponible cuando se abre el grifo.
1. ¿Tiene el calentador de agua corriente (enchufado)? Restablezca la alimentación eléctrica de la unidad.
2. ¿Está el calentador de agua encendido? Mantenga pulsado el botón de encendido para encender la unidad.
3. ¿Está parpadeando un código de error en el panel de la pantalla?
4. ¿Está la válvula de suministro de gas abierta o cerrada en el contador (funcionan otros dispositivos de gas)? Abra la válvula de suministro de gas.

La temperatura del agua no es lo suficientemente caliente o se vuelve fría durante su uso.
1. ¿Está el grifo lo suficientemente abierto como para extraer al menos 2,3 litros (0,6 galones) por minuto a través del calentador de agua? Abra el grifo para permitir un mayor flujo de agua.
2. ¿Está parpadeando un código de error en la pantalla?
3. ¿Está la temperatura del agua de salida demasiado baja? Ajuste la temperatura del agua de salida.

Tarda mucho tiempo en salir agua caliente del grifo.
¿Está el grifo a cierta distancia del calentador de agua?
a. Deje tiempo para que el agua fría que ya está en las tuberías fluya desde el grifo.
b. Tenga instaladas válvulas de recirculación y/o línea(s) de retorno de fontanería y programe la unidad para el modo de recirculación.

El agua no está suficientemente caliente.
¿Está la temperatura del agua demasiado baja? Ajuste la temperatura.

El agua del grifo está demasiado caliente.
¿La temperatura del agua es demasiado alta? Ajuste la temperatura.

Se oye un ventilador incluso cuando el aparato no está en funcionamiento.
1. El ventilador sigue funcionando después de que el quemador se apague para limpiar la salida de gases de combustión. Este es el funcionamiento normal - no se requiere ninguna acción.
2. El ventilador puede funcionar para ayudar a prevenir la congelación. Proteja el calentador de agua de las temperaturas de congelación o apague y drene la unidad.

Puede verse "humo" blanco saliendo de la salida de gases del exterior.
Dependiendo de la temperatura exterior, se puede producir vapor de agua cuando se ventila el escape. Esto es un funcionamiento normal - no se requiere ninguna acción.



Páginas de códigos de error relacionados:
Westinghouse Calentador de agua Códigos de error,

Páginas de resolución de problemas relacionadas:
Westinghouse Calentador de agua Solución de problemas,

Páginas de reparación relacionadas:
Westinghouse Calentador de agua Refacción,

Páginas de piezas relacionadas:
Westinghouse Calentador de agua Partes,

Páginas de precios relacionadas:
Westinghouse Calentador de agua Precios,


Westinghouse Calentador de agua Solución de problemas

Westinghouse Calentador de agua problemas

Westinghouse Calentador de agua roto

Westinghouse Calentador de agua asunto

Westinghouse Calentador de agua dificultad


Product Reviews:

I installed this hot water heater in May 2016 and it has been working fine
I installed this hot water heater in May 2016 and it has been working fine to date. I replaced another quality 80 gallon hot water heater that was 22 years old and was still operational with no leaks and original heating elements. The water heater is hooked into a geothermal water furnace and provides sufficient hot water for my family of 4 without ever runnig out of hot water. I suspect this Westinghouse 80 gallon 4500 watt hot water heater will last as long.
Published: June 9, 2016
William A.
Source: amazon.com

I don't know if this has spotty quality issues or what - I have had no
I don't know if this has spotty quality issues or what - I have had no problems with this water heater at all. You have to be aware that this is a new design - a water heater without an anode and regularly each month drain five gallons according to the instructions and no problems. If you don't I can imagine rust building up and causing all sort of problems. Again this is an anodeless system so you must drain it. What I liked about this heater is that it doesn't have all the claptrap that many heat pump systems have and should have a much better reliability.
Published: October 2, 2020
Just Little Ole Me
Source: amazon.com

Excellent unit. So nice to get a hot bath! Delivery professional and on tim
Excellent unit. So nice to get a hot bath! Delivery professional and on time. They called when they were on their way and brought it into my home! Paperwork reads you must have a licensed plumber install the unit or void the warranty. We had planned to install ourselves as it isn't difficult, but called a plumber to be safe. Overall happy with the unit and process! Just plan for a plumber's fee if you want the warranty to be valid. Update...6 months later unit caught fire due to defect. Trying get a replacement. On our 5th day with no hot water again with 6 people in our home. Have to pay the plumber again and dispense of defective unit on our own.
Published: December 15, 2016
Holly
Source: amazon.com

This is a great product and is working wonderfully. It was in great shape a
This is a great product and is working wonderfully. It was in great shape and was easily installed by the plumber. On the other hand, shipping was a nightmare scheduled 12/28/2017 (verified via web and LIVE person) finally arrived 1/2/2018. We had been without hot water for 10 days and had a plumber was lined up for installation after our scheduled window of delivery (9 am to noon). No delivery and no call. I talked to the manufacturer who reported that the product had been delivered to the delivery company. The delivery company had no record that the product had arrived and I had to call back the next day to see if it came in. The next day, the delivery company received the heater, never called and when I called them they were unable to schedule the delivery for the next day. Hence, I was unable to have hot water for an additional 5 days.The person that I spoke with both times acted like it was a bother to help me figure where my water heater was in THEIR delivery system.
Published: February 1, 2018
J&E
Source: amazon.com

I have been the last one in the shower the past 14 years. Needless to say m
I have been the last one in the shower the past 14 years. Needless to say my 50 gallon unit was just too small for me not to freeze. So when my old heater started seeping I started shopping. To my discovery HD and L**wes no longer carry simple 80 gallon heaters. The big box stores want to sell you a hybrid, so I was looking at a 80 gallon hybrid for 1800 bucks and a potential jackpot once the heat exchanger failed. Something made me look at Amazon and I found this beauty. Ordering was simple and the delivery date and time was selected. The truck pulled up at 0915 and the guys rolled it into my garage in its crate. This thing a monster, just about 6 feet tall and fatter than my old unit. My water connections come out of the wall, so be prepared to raise them up at least 12-18 inches. Other than that it was a simple install. I spent about 2 hours start to finish. Yes, you will need a work platform or ladder to reach the top for your connections. The initial heating took about 3 hours for the first shower but 12 hours to temperature stabilize. We also noticed that the flow rate seems to be faster as our farthest shower now seems to heat up faster. I don't know how this will effect my electric bill (I think it will be a wash), but its so nice not to have to schedule my shower for an empty house.
Published: April 30, 2016
Kathleen
Source: amazon.com

Visa MasterCard

Site Secured By The Website Guardian
CIMA