I bought a brand new house and it came with the set of GE profile appliances in 10/2009. In November of this year, it came on for one minute on its own and then popped and indicated a circuit board failure. The inside of the microwave was extremely hot and there was obviously an electrical short. This could have burned down my house! My fiance replaced the circuit board at a cost of $125. I negotiated from the service department that supplied all my builders appliances. This week it happened again. This time, there was a cup of coffee in the microwave and it boiled in the minute before the microwave fried itself! I cant believe that GE still has this product on the market! Any product on the market! I have to replace this because I cant sleep thinking its going to catch my house on fire. Are there no ethics anywhere?

Clean neat appearance over stove. Fast consistent heating. Easy heating options. Turntable on or off. Also, love the stove top light. Cost a bit more than I thought it would, but not much more than others.

We have a GE SpaceMaker JVM 239BV 001 over the range microwave purchased about 10 years ago. Within one year of installation the handle snapped - just as numerous people here have stated. I went to our local replacement parts store and was shocked that it cost $30 for a new handle. The sales person said if I were you I would by the lifetime warranty for an extra $3 because you will be back, I sell lots of these.

I purchased this product in June 2011 for a summer weekend getaway home. I used it 5 times during that summer. The following summer I didnt use it at all. Summer 2013, I used it and everything seemed fine. That night I heard something and the microwave turned on by itself! Thank goodness I was at the house. I cannot believe this unit has not been recalled yet, as I see other consumers are complaining about the same thing. I keep the unit unplugged all the time. What recourse do I have as a consumer? I have my bill of sale and paid good money for this unit.

I bough a GE microwave oven, model JVM1740SM1SS, less than 2 years ago. The keypad says that it is shorted out and needs service. It turns on randomly. I unplugged it and plugged it back in, and it will either say, service needed, keypad shorted out or press clock.GE has so many complaints about there microwaves, some that are very serious. They still claim that there are no problems with them. They have to know there are problems, but do not want to issue a recall and take a financial lose. Its only a matter of time, before something so serious happens that it will be a bigger financial lose than a recall.

We bought a new GE dishwasher 28 APR 2020. I noticed it wasnt working right about 5 months later. We are just over 1 month from the end of the warranty. The store where we bought it has been fantastic, but theyve been out 5 times to try to fix this sucker and they cant. GE told ME they would replace it if the store called to say they couldnt fix it, but when the store called, they refused. Theyre sending the repair guy out yet again one week before the warranty expires so he can call them and theyll talk about it while hes here. Ill never buy another GE appliance again.

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

Built our house and had new GE Appliances. Oven is a GE Profile and the computer panel went out twice in the first 2 yrs. The profile microwave model PEB 7226 SF1SS IS NOW ONLY 3yrs old and not functioning. We rarely use the microwave. Will never buy GE anything in the future.

I called to see if someone can help me figure out why my built in microwave is running but no heat. Apparently the customer service keeps insisting I need to schedule a service without offering any kind of help. Why do I have to pay for a service trip when I can fix it with the right part? Unlike other appliance they always have customer service helping to see and figure out what might be wrong to the appliance.

I purchased a Ge profile top of the line microwave installed over an electric oven. After 3 months the plastic handle came off and Ge replaced the entire door. This handle has now come off 3 times. The service tech said it has a plastic connector that weakens over a stove. It supposed to be mounted over a stove. This is just poor design and totally unacceptable for their top of the line microwave.

Worst experience ever. Bought the dishwasher in Jan 2014. The washer does not wash. Three different technicians have passed by, cant fix the machine. Awful customer service, routine answers, file not assigned, cant talk to a manager.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

My experience with GE over range microwave oven as follows/ Unit Mod.JVM3160DF3WWW. Ser.#GH260692A, this unit was purchased April 2017, February 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. No satisfaction from GE, NO extended warranty purchased, guilty as charged, contacted elect. tech. No idea of problem, #2 elect. problem in door sensors of which there are numerous, notice black residue on duel latch on door caused by door latch device rubbing on unit latch receiver cost to discover which sensor cause and replace one or all 250.00.We have been limping along for two months with frequent trips to basement resetting breaker (which we had replaced) next move, purchase NEW MICROWAVE. Let me be very direct if we wanted JUNK we would buy Asian made, THAT being said, there will be NO...General Electric products in this house. This is our second GE product BUST, 100.00 advertised by manufacturer. Never delivered! But hey we are just small time consumers. What might else we expect.

GE is the only manufacturer who still makes an under cabinet size microwave and therefore I use this product. I renovated my kitchen 14 years ago and on my second microwave. It is small, but does do its job, but when I work with a larger microwave I realize how different it is due to its size and less powerful.

Bought brand new GE Profile DW PDT845SSJSS as part of four appliance package to be installed as part of kitchen renovation. Bought in April 2018, renovation delayed until August 2018, install of appliances October 2018, installer by contractor plumber- excellent seasoned experienced installer. Never used DW until moving things into new kitchen. Washed dishes off in DW before placing in cabinets. After 3rd cycle- DW stopped working stating leak detected - contact GE. Are you kidding me? Brand new appliance! We had original installer come out- no leak- no visible water- we went to placed we purchased DW from - local place - Ray’s Appliances- asked for replacement DW. Was told we would have to pay for installation of 2nd DW at 225 charge. Are you kidding me? GE guy came out and did something to DW to fix it but said problem could return... Serious??? Well -DW worked for a few cycles- now displays leak detected again! Called GE and coming out 12/2. Ridiculous- I want a NEW DW with free installation! I’m paying @971 bucks for something that didn’t work from the outset!!!

I recently purchased a GE Profile 1.9 microwave oven from Home Depot less than a year ago. Last week I went to remove something that I had cooked and went to close the door and it would not stay shut. I ended up getting some masking tape to try and tape it shut in order to keep the light from staying on and burning out until morning when I could get a better look at it, thinking that it had to be something small that could be taken care of without any problem. Hinge adjustment, something getting in the way that I couldnt see, etc, etc. Wrong! I have been over this door with a fine tooth comb and there is nothing that I can see that is preventing it from staying closed, not only that but according to everything that I have read, I am very lucky that I didnt get fried while trying to figure out if the latching mechanism was functioning correctly. I am not even going to go through the long drawn out process of dealing with GE over this due to the simple fact that I have been there done that with my dishwasher that showed up with the front panel dented a few years back from the factory and I ended up blaming the place that I had purchased it through instead of GE and have since found out by reading other complaints that this seems to be something that is not unusual when it comes to GE appliances. I spent over 1100.00 dollars on the dishwasher and they only replaced the panel instead of giving me a new one, and I have never been satisfied with the way that it operates, and it was a very long and drawn out process and I am just not willing to spend the time again on another one of their products. It is unfortunate that we have entered a time where customer satisfaction means nothing, and the days of caring about having repeat business from a satisfied customer are over. The prices continue to rise on the things that we have become to depend on and cant seem to live without, but the quality and workmanship have not only diminished but also present safety threats. I will never purchase another GE anything and I am looking forward to the day when we all have finally had enough of this and do something that makes these companies stand behind the products that they sell and quits ripping the consumer off. Its rampant across the board no matter what you buy, and there should be laws in place in order to keep it from happening. We have laws for everything else, why not have a couple that protect the consumer and their pocket books.

6/11/2014. My microwave of 5 years the GE Adora starting to act strange. It would start to hum and the panel light would light up. The humming would only stop if I opened the door. Sometimes it would stop on its own. But today the humming kept continuing and I thought it was harmless until I heard a loud pop in the microwave and smelled something burning. The microwave glass turntable had exploded from intense heat inside the microwave. It was bizarre. Immediately I ran over and unplugged the microwave hood. In all the years and houses I own, this is the most expensive microwave I have purchased and it has lasted me the least amount of time! Microwaves shouldnt start on their own and thankfully I was home when it did. Otherwise my house would have burned down.

I bought a microwave Model JVM316RF3SS on 6/12/16 from Best Buy. Here is the serial number GG242212A. This thing is tripping the circuit breaker, it is intermittent. I had been buying GE for the house because the stuff would last or they would stand behind their products. Looks like times have changed, I called yesterday to the customer service and the only thing I was offered was a song and dance. If you are to consider buying a GE product, think about it again. This microwave is only a year and a half, to have a tech service guy come out and look at it, it is was priced out at $97-108 for a visit and then parts and time will be added in additional to this visit price.They have priced this repair out to be cheaper to just replace it. My washer is making excessive pump motor bearing noise during the high spin cycle, this is two years old. Looks like GE is building crap. My background is a mechanical technician for over thirty years, building products that are to be used in the household should be built to last not become a disposable item like a cigarette lighter. Good job GE for joining the other substandard products being built. Must be outsourcing this to a foreign country like everything else. With the model and serial number GE you can call me if you have ANY questions.

We have a GE Advantium Microwave. It is our second model (we moved and left the first one behind). It is spacious, has an intuitive menu system, cooks extremely well, also includes a convection oven feature that we use to great advantage. The nicest microwave weve ever used (and weve used plenty of them).

My GE DVM5140DN1BB Serial # ZS 902371B manufactured in December 2009 has stopped functioning. It looks and sounds like it is working but it will not heat. GE only guarantees their warranty for 1 year after the date of purchase. This should have been my first clue. For a fee, they will come look at it.Growing up we had an Amana Radar Range. My mom bought it in 1987. I replaced it so that I could save counter space and also that it would match my other kitchen appliances. I bought the GE microwave in May 2010. This product lasted for a total of 16 months. Ridiculous! In my opinion, big business companies no longer have to be held accountable for producing bad products. Money was lost but will never again be spent on a GE product.

Just purchased a home with GE Appliances. Dishwasher suddenly wont start and showing 1H code. Nothing in the user manual that explains what this means. Called customer support. After they requested unnecessary personal information (like email address, physical address, etc.), I was finally able to ask what this code meant. She went straight to, We are unable to provide that information over the phone. We have to send one of our service technicians out to your home. She refused to tell me what the code meant, and instantly wanted to charge me for tech visit. I hung up. Then I googled it, and found out right away that it meant the start was paused/delayed for 1 hour. I had hit the delay button by mistake. This was not specified in the manual under Delay Start, nor was customer support trained or willing to provide the answer to such a simple question. GE Support is just a Scam.

I have bought 3 GE appliances in the past 2-5 years, a microwave, dishwasher and oven with cooktop. They are all white and the white paint is peeling off. The microwave is the worst with most of the paint gone from the metal around the window inside. I will never buy another GE appliance again. To have 3 different appliances with peeling paint signals a definite quality control problem in the company.

I bought a GE PEB7227 Profile Microwave and after 6 months the door latch breaks. Service tech comes and says, Sorry parts are back ordered for 3 months (including new frame due to damage done to it getting the thing open). I call GE customer care. Explain that its obviously cheaper to drop ship me a new unit (and I will waive the new frame) than all of the parts, frame and a second call to fix the unit. Their answer, buy a new unit at a discount or simply go without a microwave for 3 months. Add me to the list of victims trying to warn others to NEVER buy a GE product.

I bought GE dishwasher model #GDF570SGJOCC from a local appliance dealer in April, 2017. The machine cost about $600, and $150 to install. Today I learned the circuit board is caput and it will cost $600 to replace it. I will never again buy a GE product-- 2 years of service and it needs to be replaced.

To inform others that need an under-cabinet space-saving microwave, unless you are replacing an existing GE unit (and want the mounting brackets to align for easy re-installation), I would strongly suggest getting a different unit. I am about to buy my third GE undercounter microwave for the past 11 years. The rest of my kitchen is pretty high-end Thermadore, Kitchenaide, ASKO, and Braun. My last Profile PEM 31 DMBB lasted less than three years. The Toshiba that I bought while deployed to Okinawa lasted 15 years.

Our Profile over-the-range microwave failed after 2 years. (Warranty was for one year!) One day it suddenly died. The repairman ($100) said repeated twisting of the wire from the oven to the door (which contains all the electronics) is inevitable with opening and closing. The wire often breaks within its insulation: a bad design fault. No question of replacing the wire; we would have to order a new door, for nearly $400 plus $200 for installation, which requires 2 service technicians. This is more than the cost of a new OTR microwave. He advised us to get one with the controls beside, not in the door. Unfortunately GE is the only company that makes a microwave in the same colour as our range.

GE GDF520PGDWW 24 white, full console dishwasher - Energy Star. I have had this dishwasher model since December 2014 and it has not drained consistently since the beginning either during the wash cycle or rinse cycle. GE has sent three different repair companies to replace the pump, the control panel, and ultimately the entire dishwasher, yet even the new dishwasher still does not drain consistently. Sometimes it drains and sometimes it doesnt. The GE-certified repairman was again here this morning and is again ordering a new pump. Counting the original pump, the previously replaced pump and the pump in the new unit, this would be the fourth pump. I tried to suggest the problem may not be the pump, but the repairman could not think of another possible issue. I do not recommend purchasing this dishwasher.

Our GE Profile dishwasher turned itself on and overheated to the point that everything inside was completely melted. This has been happening with other models but mine PDW9900NBB is not on the recall list. This leads me to believe that there is a serious defect in GE dishwashers. Even more disappointing is the length of time one waits to talk to a customer representative. Whatever they decide to do, I have lost confidence in GE completely and do not want to replace this with another fire hazard. Bosch, here I come.

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

I bought a Moffat washer and dryer, and the timer came out of place and burnt on the inside. The timer clips in and if push too hard it will fall out or break the clip. We have extended warranty on it and due the repairman came out twice. The warranty person said it cost more for the repairman than the dryer worth - theres no more warranty. I think the dryer should replace when the timer fell out of place. This dryer should be called back.

GE Profile Microwave wall oven combo model PT970SOM1SS - We have a few years old unit very gently used. However, we now have the paint peeling and flaking from the top and back interior wall of the microwave. Some spots have bare metal exposed. Contacted GE and they told me there was no fix for it other than replacing the device. Now they cannot replace the Microwave alone. The whole unit has to be replaced at a cost of ~ $2800.00. This is ridiculous. There should be a recall as there are several other complaints about similar issues.

Have a three-year-old townhouse in New England that came with GE appliances. Within months the microwave needed a new circuit board and, later, the auto open vent is making funny noises when it opens and closes. WORSE: Dishwasher on fritz in third year, requiring a new computer control pad. The cost: $283. American-labeled products produced in other parts of the world are going to cost twice or three times as much before their useful life is over. Shop with care, friends.

I give it stars for value because an extra step is needed to set cooking time. Most microwaves do not require pressing a cook time key before selecting # of seconds. Other than that, microwave is first-rate and very dependable. We use it several times a day for 1.5 years now with no problems.

We wrote to GE regarding the issue with the dishwasher and, after some phone tag, a certified GE engineer came to the house, diagnosed the problem and ordered all the replacement parts. This morning, they came by to install and essentially rebuild the entire system with the exception of the stainless steel. Overall, we are very happy with the outcome. With all the negative issues GE experiences online with regard to the Cafe Series, I give them a solid 8 for responsiveness and taking care of the situation. Perhaps ours is a rarity, but if you approach them logically and with facts, they seem willing to work with the consumer. Heres hoping the system cleans better now too!

2 year old GE ADORA dishwasher - I am so disturbed tonight after seeing what happened to the protection rubber that is on the exterior of my dishwasher. I decided to buy a new dishwasher because the bottom tray would not stop when pulled out at the correct stopping point. Today I got my new dishwasher installed and when the installers pulled the old one out I was shocked to see that the protectant that I would assume was placed to protect my house was melted all over my wall behind the dishwasher. WOW. Talk about a MAJOR fire hazard. Thank God my house didnt catch on fire because of this faulty equipment. Check out my pictures and you will see the pile of protectant that was under, on my wall, and behind the dishwasher once it was pulled out. Sincerely concerned.

I have had my GE microwave for over 6 years and the paint is flaking off the inside of the microwave, causing a health and fire hazard. Paint chips in the food and bare metal exposed can cause arching which in turn can be a potential fire hazard. After researching online I have found that this is not a uncommon problem with GE microwaves. Some have had this issue after 1 year. I contacted GE and told them of the problem and that I felt this was a manufactures defect.GE does not feel that this is a defect problem but advised me not to use the microwave any longer. Their solution was to discard this microwave and purchase a new one. I paid almost $300.00 for the original one plus $20.00 for a mounting kit. I was told that GE would offer me a discount on a new one from $339.93 to $319.93 total. This is not much of a offer considering this should be a obvious manufacturers defect. By ordering another I will have the same problem again. GE needs to stand by their products and admit fault.

Bought a GE microwave and it broke 1 year and 1 month after I bought it, called and found out it would cost more to fix than to buy a new one. After reading other peoples report on how GE treated them on their problem, I will not buy GE anymore.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

Today my GE black microwave with rack mounted above the stove, caught on fire by itself. My husband and I smelled a chemical like smoke. We went in the kitchen and we saw fire in the microwave. We put out the fire and was thankful that we were home. If we were not home our house would have burned to the ground. The microwave was not in use at the time of the fire. I plan to contact GE about this dangerous event. My asthma has gone crazy since this horrible situation happened. I just want to let people know that GE microwave will catch on fire without being in use.

My purpose is to inform the public that GE will not stand by their stainless steel dishwasher appliance on rust. In less than 10 months the outside of our door has rust spots. I used only soap and water and cloth to clean as door does not get dirty and our water in Hawaii is safe and drinkable. Does not require water filters. GE CS said, We will only cover for 30 days after purchase, and cleaning products used and most likely our water type caused this issue.

We bought a new GE microwave oven in 2007. It failed in 2018 after much, much use. We replaced it with a Whirlpool which failed in one week. Lowe’s let us return it and we bought another GE like our original and we are very happy with it.

My ancient GE Profile Spacemaker II Sensor microwave, the successor to its predecessor, is consistent, great performance, reliable. I chose this model because I was happy with its performance. But it could be less chunky. I would like to remodel my compact kitchen, and a sleek newbie non-chunky GE Microwave Oven would be awesome!!! :)

We bought a GE dishwasher after owning a KitchenAid. The GE is quieter, washes better, takes longer, but it doesnt really matter. I use Quantum tablets and everything is always clean when we are done.

My microwave on the inside paint start peeling off. I have this appliance 2 years, it has slowly been peeling since that time and now it has completely peeled and rusted on the inside. This WAS a gift. The outside looks great, the inside is so bad. The serial # is LT914637B model JES1451DN1BB manufactured in 2010, Made in Malaysia. Be Louisville ky 40225. Does the united States make anything except make us pay taxes. This is a piece of mess. The last 2 years my husband he suffered with LLC. Now I got to deal with this. Poor workmanship. I want GE to give me my money for the MW or total replace it. Rate 0.

Have been using dishwasher (PDWT380VOOSS) since May 2013. Dishes do not come clean and I rewash by hand... have followed all suggestions by consumer relations, service technician and manual…cant afford to replace appliance…GE willing to replace at an aggressive discount because the appliance is working as it was designed to…disappointed in performance of a profile appliance.

It has been a remarkable machine: reliable and efficient! I have had my General Electric microwave since 2001. It has never given me one day of trouble. The size is perfect and the heating mechanism has been flawless.

Beware of GEs scam! My new house came with a GE microwave oven model JVM1630. It no longer heats food so I called GE repair. Heres basically what they told me: It is likely the magnetron tube and it is still under warranty, so no charge to replace it but I would have to pay $99.95 for the repairman to come to my home to diagnose the problem. If I decided I didnt want to repair the microwave, I was offered a $100 coupon toward a new one but it had to be a GE and it had to be bought on their website only. If I decided to go ahead with the repairs, the $99.95 would be deducted from the bill and I would only have to pay for additional parts and labor. I repeatedly asked for a ball-park labor charge so I could make an informed decision as to whether it was cost effective to have the repairman come out or just get a brand new one elsewhere. The person on the repair line hung up on me! I called back and I was told the same thing; that no one could tell me what the labor cost estimate might be. I asked to talk to a supervisor and same story. I didnt schedule a repair because I was taking a long trip and wouldnt be using the microwave anyway. When I returned from my trip, I called GE repair and again they wouldnt give me a ball park figure. Frustrated, I decided to have the repairman just come out and repair the darn thing and an appointment was scheduled for the next Monday. I had to rearrange a Monday day trip to Wednesday and set the repair appointment. On Monday, it was starting to get late in the afternoon, so I called to find out if the guy was on his way. A recording said my call was noted and I would be receiving a follow-up call. About 10 minutes later, Kim in dispatch called to tell me she had to reschedule the repairman to Wednesday. I explained I already had an appointment on Wednesday. which was already changed because it conflicted with the repairman coming to my home. She told me the repairman couldnt come because his truck wasnt safe to drive so that whole day was shot. The appointment was rescheduled for Wednesday and I had to again reschedule my other trip. When the guy finally showed up on Wednesday, he told me to put a glass of water in the microwave and start it. Ten seconds later, he declared it to be the magnetron tube. He was at my house about 10 minutes, just long enough to take my $99.95 credit card payment and to give me an estimate of $246.90 to repair the microwave which included the free magnetron tube, a $20 part plus tax and labor. The estimate had instructions on how to get the $100 coupon if I decided to buy a new GE microwave, which he said is what most people do. He didnt seem like he came prepared to repair the microwave at all. I was so frustrated and already out the $99.95, so I told him to go ahead and repair it. He said I should call repair to schedule him to come back to repair it! I told him to just repair it now and he said he didnt think he had a magnetron tube in his truck. I asked him if he would go to the truck and check! He did, and nope, no tube and he left.I think this is a great scam GE and maybe others have going. Its entrapment. They get you to accept a repairman to come to your home and charge you nearly $100 for it, but give you a coupon for $100 for a new one but it has to be a GE and can only be bought from their website where they can go as high as $500 or $600. By the way, I got on the website to find a replacement. My model had been discontinued and the only one in my price range was also a discontinued model. They charge $75 to come out to install it and another $30 to take away your old one. I called local appliance stores to see if I could unload my old microwave for parts and they all said the same thing: stay away from GE products.

Our microwave came with the house so we didnt choose it. Ive had a bit of trouble with the rotating mechanism making knocking noises a few times which Ive been able to finesse by exploring troubleshooting online. Other than that its been dependable for 4 years.

All I wanted to do was eat dinner with my husband and I wound up on the internet for an hour trying to figure out how to make our microwave work. There is some kind of thing that locks you out of using it. Very frustrating when you just want to eat dinner!! Nothing works and you have to google how do you unlock this piece of crap that you paid good money for and trusted the GE label. All we ever use is defrost food or time cook vegetables. If you want a complex computer, go for this thing. Otherwise, I suggest you go for a simpler microwave that you can depend on to work.

While the microwave works fine, as far as microwaves go; it does heat unevenly but eventually gets the job done, the interior is cracked and shows signs of rust and deterioration. I dont remember ever seeing this on in previously owned microwaves. I would only use it for basic heating and reheating.

I bought a GE Profile dishwasher and have the same problems of residue on the dishes. My dishwasher is only 4 months old. I paid top dollar to get the same line as my refridgerator. This dishwasher should clean the dishes sparkling clean for what I paid for it. Disappointed in Cobden

I bought GE Profile appliances 5 years ago. The dishwasher motor needs a new one. It cost me $300.00 to fix and I ended up buying a new dishwasher, of course, no more GE. Six months ago, my GE profile fridge is not making ice. It cost me $300.00 to fix. Now, the freezer is not working right. I was told another $300+ to fix. I went out and bought a new fridge. Back to basic, Kenmore brand. GE profile is not inexpensive and only last 5 years, starting to break down. Please stay away from this company.

The microwave is easy to use, performs as expected, and does not need an engineering degree or magic wand to do its job.

Consistent with many reviews about poor customer service and saga to try to get an appliance fixed, we experienced a very situation with their microwave. Power is on but doesnt heat food. 5 visits later and multiple calls to GE became a string of technicians having to order a part, waiting at least a week to receive the part and technician trying to fix it. For 2 weeks the microwave worked and then stopped working. Called GE again, and again they insist on having technician come by to diagnose the same problem. We put our foot down and asked for a replacement and were denied because it wasnt deemed to be irreparable. I stayed online until they offered a discount on a new microwave and they then took more than a week to send that and also proceed to take the old one which not convinced they were entitled to take given we had to purchase a new one. Completely inefficient process, customer service agents who are in and unfortunate enough to follow an inefficient process that is not focused on the consumer. Really unfortunate for a top tier company whose mission is centered around the customer but fall down on execution. Really disappointing. Im glad that we live a in capitalist state that allows us to have other choices and not feel stuck with one brand. The cost of our time and stress and technicians hourly wage is disproportionately greater than the 300 dollar retail price tag for the machine.

A GE water heater was installed in our new home in 1962. As of today, November 2, 2014, we are pleased to let you know it is still in excellent working condition 52 years later... Way to go GE... The only update we changed lower element twice in 52 years!!!

Very heavy to mount above a stove, not enough watts. The model I have is 900 watts, too many options for cooking different foods, not many parts are available to make a repair on any of the GE microwaves, I would not recommend purchasing a GE.

Our stainless steel finish 1100 watt JES1142 microwave is around 2 years old. Within the last year the finish inside started to corrode (yes, my wife cleaned it regularly with a non abrasive, appropriate cleanser). Also, the door latch button started sticking and a few days ago it just stopped heating. Unfortunately I cant find my receipt, but I bought it at my local Lowes on Bell Rd. Nashville TN. Serial # is MA212483G. Manufactured July 2013. Was this just a lemon? Very disappointed.

I bought my GE DISHWASHER many years ago. Only use once in a while because there are just 2 of us in the house and it takes too long to fill it, but when I do use it it work fine.

DO NOT BUY GE APPLIANCES. The quality is terrible even on an expensive dishwasher. I bought a $700 dishwasher in November 2016 and in April 2017 it was broken, parts not available, but after fighting with customer service, they sent me the parts at my house. No one is available to come over to install the parts, the parts are sitting at my table. I guess they want me to install them myself. I even had purchased a 5-year warranty. Customer service is non existence at General Electric. I know I will never purchase a GE product ever again.

Called in for my washing machine and got service on my dishwasher??? With a bill of $207. A scam. Please take my advice and never call GE.

Had model JES1460DS3BB less than 2 years. I started to smell burning plastic when using it. Research tells me the wiring is burning up. Im sick and tired of GE appliances. Ever since my GE toaster caught on fire in 1969 Ive had bad luck with GE. I gave the company another chance when I bought this microwave. I will never buy another GE appliance - large or small.

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

I have had 2 of GE microwaves, above the range models. Both the same model, but different years. One stainless finish and one almond. They are almost exactly the same. They are efficient, and I like the carousel for even cooking. But I would like it if the light bulbs under unit were easier to replace.

Dont buy one. I bought two last year. The first one completely died before the 60 days were up. I took it back to Sams club and bought another. The tag inside says it was made February 2011, so its only a year and a half old. Under the carousel, the paint is peeling big time. I wrote GE repeatedly, asking if it was still ok to use it. After ignoring me for quite some time, I got this reply. In the notice, they told me to get Sams club to replace the defective and apparently unusable product they are selling knowing it is defective. I love the part where you cant cook something with too much liquid in it. Who does that when they microwave?Heres what they said: Thank you for contacting GE regarding your microwaves and the paint peeling issue. I did some research on it and found that it a common issue among all brands. Excessive heating of un-covered liquids can create a high amount of condensation that the inside paint is not meant to withstand. Minor chips to the coating on the microwaves interior cavity will not affect the products performance. However, if the coating is actively flaking or peeling anywhere inside the oven cavity (including under the turntable), discontinue the use of the microwave and replace it. GE does not have an approved method of repair, and the microwave is not repairable. Please return to Sams club for an exchange, if you are still within the one year warranty. If Sams is refusing to accept the return, contact the Sams Club Support Team at 1-877-885-2787. GE will then reimburse Sams club.

I bought one of the microwave ovens with two metal shelves. I found that the shelf in the middle of the oven was in the way and I removed it years ago, but left the top shelf in the unit. The other day, while cooking in the microwave it started to spark at the point where the shelf sat on a small clip. The inside of the oven is ruined. Why would anyone put metal shelves inside a microwave? Im just lucky that I was nearby and able to stop the fire before it destroyed my kitchen.

Just bought a Monogram dishwasher one week ago, and the front sound barrier fell off. The service man came out, took a look, and said it was not a big deal. I questioned him why it fell off within such a short period. He stated that it was GEs policy: to make Monogram quieter than competitors, they put in sound barrier in front. However, it fell off often. Since it does not affect how the dishwasher work, GE does not believe that it is a big deal. Therefore, no need for quality control, and he will use new glue to glue it back. No guarantee that it will not fall off later... What is GE stand on the engineering products any more? Will never buy any more GE product...

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

Our GE microwave does all the things you would expect from a basic microwave. It cooks vegetables, reheats leftovers and warms coffee. It looks nice on our counter. Do I think it is worth the money we paid for it, NO.

We purchased a new GE dishwasher from The Brick, after three washes it leaked all over our new hardwood floors. I called The Brick and they said it was GEs problem. I called GE and they sent out a repairman who told us it was a broken seal on the pump and that this dishwasher is discontinued and he cant get the part. So, that would mean GE would have to replace our washer with a new one! We went back to The Brick and told them we did not want the GE washer and wanted to replace it with another brand as we were within the thirty day guarantee. No apology or well pay for the damage to your floor (floor is warped underneath) and guess what Im still waiting for a call back from GE!! Dont buy anything made by GE. You will regret it! As well, I will not be shopping at The Brick anymore.

Had to order filter separately. No one said anything about filter not included. So it holds up the whole installation process. So now we wait! Not Best Buys fault unless it is supposed to be mentioned. Last microwave we bought, filter was included, twelve years ago.

It is about six years old, great dishwasher. The bad part is the new detergent! GE profile, pre-rinse, preheat water, everything, including enough water. Hold everything, unfortunately, now aluminum must be hand washed. Good looking, curved front. Its great, I shudder to think what the new low water usage ones will be like. I HATE my new low water usage washing machine. I HATE the reformulated dishwasher detergent, can be used on anything aluminum, now I use lots more water hand washing all aluminum items!!!

I bought GE OTR microwave in December. It is exactly one month old now. My model no. is: 9195SVC. It looks good, but I find the fan very noisy, even when it is at low. My range hood which we had in the kitchen prior to this microwave was very quiet at low and only a bit noisy at high. I do not know if the noise is because I have steel exhaust pipes vented out. Rest is O.K. but given that others have reported problems in 1-2 months, I am still nervous.I bought this product at Sears with an extended warranty, which is some relief. However, when I was shopping for this at Home Depot, the salesperson told me these microwaves last only 4-5 years. One good thing about Sears extended warranty is that if it is not used over the five years, they refund the warranty payment (with taxes) in the form of a gift card and they were also cheaper than Home Depot.

We had a GE microwave that my parents got when I was in elementary school that lasted us through graduation (when I got it), and it then lasted me another 6 or 7 years after that. It was a great microwave, so we went with GE for our next one. What a mistake that was. The new one died completely less than a year after we got it (less than a year after its manufacture date at that!). The one after, one of the same make and model, lasted 3 years to the month after its manufacture date. Sorry GE, but I just do not have any interest in spending so much for so short a lifespan on your products, and its a damn shame that your quality has suffered so badly that you have lost a once-loyal customer of your brand.

Two years ago, I replaced my 25-year-old GE bottom-of-the-line dishwasher because it made a noise like a freight train. I was ecstatically happy to have a brand new top-of-the-line stainless steel GE Profile dishwasher that hardly made a sound while working. Well, that is the best part of the new machine because it also hardly cleans. We have tried different detergents, additives, etc. We have checked our water temp, pressure, etc. Not only does the machine not clean all the silverware/dishes, it doesnt dissolve and remove all of the liquid detergent, so I have to run the machine through another rinse cycle. We are so frustrated in my house that we have finally given up and now hand wash our dishes. I hate this dishwasher and would never buy another GE product again! I also had an issue with a GE bottom freezer fridge. But thats another story. By the way, the old 25-year-old machine? It always got my dishes clean.

I purchased a GE Dishwasher 3 months ago and it has been broke (wont drain) for almost a month. I tried to schedule a service through GE since it is under the warranty and they never showed up for the second time. I called and complained but it is not just the product, their service is even worst than the product. I am going to take the unit to Home Depot and ask for a refund or exchange with another brand. It is suppose to be brand new and wont drain or can we get a service scheduled. Never buying this brand again.

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

G.E. Spacemaker over the stove microwave. This is my second microwave of this type in 14 years. The first one lasted only 5 years. Im satisfied with the product albeit the price tag is too high.

On 05/20/2014, our GE microwave over the stove unit burst into flames. My wife was using timer and walked away then turned around and heard the microwave fan start (spontaneously). Then she observed flames/smoke reflected in the Microwave window. She observed the interior of the microwave was aflame. The fire was extinguished with a rag & water. The burning items appeared to be plastic/insulation. The fan from the microwave was with the burning insulation on the rotating plate. Had this unit only 14 months during that time the microwave fan would turn itself on for 3 minutes and then turn off all by itself. Happened twice in 14 months. Glad we were at home and were able to extinguish the fire. Called Lennar the builder who put this unit in to take pictures and check electrical. Was told the GE unit was bad to call GE. I know this will be a hassle as others have had this same problem with not so good results.

We purchased this dishwasher for our rental. The last dishwasher was over 30 years old and still working but the racks were coming apart so we opted for a new one from Home Depot. A year later our tenants called saying when they used the dishwasher it rained in the basement. Our maintenance man called and said the dishwasher melted a hole in the right side about 1.5 inches by a 1/4 inch. Midway to the heater element. He did a temp fix with silicone.I called GE Recall number and was told it was not on a recall list. I called customer service and was told they would waive the service call. I explained this was a FIRE HAZARD. They insisted all they could do is send their tech out for repair. Since I paid about 280 dollars for the dishwasher I decide a service call would probably run near that and told them NO! I am now sending all information to consumer affairs department with my STATE REPRESENTATIVE. I also am putting the fire hazard info out there on facebook and twitter. I am waiting for someone else to say they also had a fire hazard. This should be on a recall list!

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.

Fact no. 1: On 02/25/07, I supplanted a burnt-out 12-year old Kenmore microwave oven. Regretfully, my replacement of choice is a GE JES1456WJ02 unit acquired at Home Depot in Cumberland. At that stage, my spouse was afflicted with an advanced case of Parkinsons disease, and eventually, I had her concerned caregiver reporting having found chips of paint spread on food extracted from the new oven. From that point onward, I established a close watch of the infamous appliance, after confirming that the chipping paint originated from the roof of the GE oven. But I withheld from filing a claim with GE at the time because my wifes health deterioration absorbed all my attention.Fact no. 2: But on 12/12/09, a couple of months after my beloved one passed away, I decided to take the oven to a Home Depot claim department where they immediately agreed to replace the defective unit for another one of similar characteristics. With a sigh of relief, thinking that I had taken care of the problem, my assumption was incorrect.Fact no. 3: Today, 10/28/11 in fact, I discovered chips of paint floating over a plate of soup extracted from the GE oven. I was aghast! I couldnt believe it! Still, further inspection determined that the lousy internal coat of paint is likewise peeling off from this monstrosity appliance manufactured by GE.

My GE microwave is not complicated to use. When cooking prepackaged dinners it cooks perfectly in the time the food instructions say it will. I have used other microwaves that the food is over or underdone. No problems with defrosting fruit either. I am very pleased with cost and performance.

We purchased a kitchen full of GE Cafe appliances with our new home two years ago and yesterday the handle to the door came off in my hand. This is an $1100 microwave that is two years old. GE wants to sell me a new door for over $200. It just seems a little underhanded that we buy high-end appliances thinking we are getting a good product. My mother has a microwave the cost less than $100 at Walmart, its six or seven years old and has never had any issues! Show how much they can overcharge us for cheap merchandise and get away with it!

My GE counter top microwave (JES1456), purchased from Home Depot less than a year ago, just stopped working today. No lights, or anything. The electrical outlet is fine. The GE warranty appears to be effectively meaningless. It is cheaper to replace the oven, than have it repaired. I will avoid GE products in the future.

Not only does this dishwasher do a lousy job of cleaning dishes, I have just found out it allows dirt to collect under the door flange==lots of dirt! There isnt enough hot water to clean this out. Very gross--do not buy.

Touchpad for CVM2072SM2SS stopped working. This touchpad has been creating issues for the last couple of years. Few reconnection of wires got it working for the last few times and now it is completely broke. GE is not ready to help with fixing the issue. It wants to sell me another microwave CVM1750SHSS which seems to have similar issues (also the plastic handle for those microwaves seems to fall apart due to heat). In fact, the reviews for the whole range of GE Cafe series seems to be pretty bad. GE is not owning up the design issues. Too bad!

I bought a new house and within 2 years my GE dishwasher and now my GE microwave jvm1750sp1ss need replaced. Ive got a cheap $100 microwave in the basement thats worked for years. GE quality has apparently went downhill. NEVER again. Cannot believe appliances that cant even last 2 years.

Microwave oven, model # WES1450DN1BB, manufacture date, April 2011 - Your customer service sucks! I called there 5 times today and was told my microwave oven has been recalled, yet no one knows! You dont have it listed on the recall or anything. Your Customer Advocate doesnt know its recalled but your Service Department knows and I was told by them that it says, Do not repair, return to the place of purchase. Yet, I called my place of purchase and they know nothing of it either, but are going to work with me the best they can! It was manufactured in April of 2011 and we bought it around July 2011 (we think it was around then). There are many complaints online about the same issues as we are having - paint all bubbled and peeled off the inside top, and smell of burning wires coming from under it! If something would have happened to someone in my family or to my home, you bet your ** I would have sued the pants off of your company! Someone needs to get their ** straight with what is going on in your company or you are going to have a lot of issues! I may bring it to a higher level just because I am so pissed off that no one was informed about this issue, and something very bad could have or still can happen to someone because they are not getting the information they need! Stop and think about it. Because of your companys lack of communication, someone could die! I am very pissed off!

We had some oil spill in the oven, which proceeded to catch fire. It was a huge fire that burned for a while. But all it took was a little oven cleaner, and it looks like nothing ever happened! The coating and materials inside of the oven are completely fine. It also still works perfectly! I'm amazed. 10/10 stars.

I purchased a GE monogram microwave along with all the other brand new appliances when I remodeled my kitchen. Let me be clear when I say I will never buy another GE product again in my life. Not only is the product inferior but the customer service department is run by a group of very inept people that lack basic communication skills. The microwave I purchased needed two repairs within the first five years of purchase. I have a microwave in my office at work that I purchased over 10 years ago and Ive never had an issue with it. Needless to say, it isnt a GE product. Last April the microwave started acting up again and kept turning itself off. We didnt even bother calling GE because like everything else their repairmen are also incompetent. 1-800-Appliance came out and found that the magnetron needed to be replaced and we should just purchase a new appliance. Because our microwave had been installed in a custom made cabinet and the trim kit was still good, we made the mistake of purchasing the same exact microwave from GE for convenience. This was in April of 2014. Right now I am waiting for a GE repairman to come and take a look at it because it is already not working. This is after I spent an hour on the phone with consumer relations. I will never purchase a GE product again.

First, as a new homeowner blessed with select builder-provided appliances, I never imagined I would be authoring this letter 4 months after closing on the new home. Your friggin’ microwave oven light mechanism truly sucks! I lost the two bulbs a week or so ago and purchased two more at the cost of approximately $10, even though a one-year warranty was stated. That was okay, as I was more interested in fixing the problem versus starting some long-range purchase interest. So, and this is the most aggravating aspect, I have the correct pins and life is ** good, and as I attempt to insert the first, the ** pin breaks off. Okay, so I reflect on the horrific engineering of the mechanism, and I softly” align the second of the two bulbs, and the ** pin breaks off again. ** is my predominant theme tonight. As well, believe me, I am going to inform Taylor-Morrison that their respective selection of your friggin’ lousy pieces of crap is corrupt and misguided. You suck, G.E.! I’m moving forward.

The defect is in the Gas Control and Thermal Coupling, per my licensed plumber. GE tells me my water heater is still under warranty; therefore, I would like an authorization code to have it replaced by Home Depot where it was originally purchased. Home Depot tells me I need GE to give me the authorization code. BTW, your CS rep was very helpful. She is sending both items to me, but I prefer to have a replacement for the cost my plumber will charge to install parts in a questionable product. Thank you.

Its an older Hotpoint, and the layout is fairly roomy for a dishwasher of its size. The last apartment I was in had a comparably sized dishwasher that had too many shelving elements that got in the way of being able to just shove some dishes in there. Ive discovered with this dishwasher I need to stick to powdered detergent because the Hotpoint doesnt fully dissolve tablets. It does a fine job overall, though.

We purchased a new home with a GE Profile dishwasher installed. Since the day we had it, we have never been satisfied with the cleanliness of the dishes. They frequently come out covered in food and must be rewashed. We now routinely prewash everything in the sink and we always use the cookware setting to wash everything. Despite this, we still have to re-run loads because they are not clean.I am convinced that there is a design error with our dishwasher, because the top dish shelf obstructs the door of the soap compartment and prevents it from fully opening. After a load has run, you can still see leftover soap dried and crusted in the soap container. If the dishwasher cannot even wash the soap out of the soap compartment, no wonder our dishes are not clean.

I moved in to a newly-built home in Nov. 2010. Shortly after, my GE Profile microwave seemingly caught fire. We called for service and were offered a repair free of charge. We declined a repair and did receive a brand new appliance of the same model. Around June 2012, the exact same fire happened to the new one. I must admit that it took me about 9 months to report the problem because my family had been devastated with a lengthy illness and passing of my mother. While going through our trial, I shut down my mothers apartment and just started to use her countertop microwave. Realizing that I needed to address the problem with my microwave, I called and explained this to GE service. I guess that the representative was just doing her job and stated the year warranty spiel and had no concern of this being my second microwave within a two and a half year span and also the length of time that it had not been working. I was immediately given the cost for a serviceman to come out plus I was told that I would have to pay for any parts. When I went to Home Depot to price the microwave; the cost for my model was $278. I therefore decided. Why bother to have a defected model repaired? Who needs the aggravation? I will just eat my loss and buy another microwave. Be assured that it will not be a GE. I will never again buy a General Electric product.

After only 4 hours of installation, the microwave turned on and the fan and light came on. It was not cooking anything. Inside of microwave was hot and I could smell a burnt electronics smell. I unplugged it, waited a few minutes, and when I plugged it in, it started up again. The LCD screen was scrambled, all lit up. Opening the door stopped the unit, but it started again when I plugged it in.

Unit is only 7 years old and not greatly used (only two adults who dont use it much)… Purchased as part of package including GE refrigerator, range and dishwasher (already got rid of refrigerator, as parts kept breaking and unit had other chronic problems). I turned the microwave on to make popcorn - it immediately made a terrible noise and filled with smoke with an electrical smell. Unplugged the unit and contacted GE Repair. When I described what happened, I was transferred immediately to their safety unit because of the nature of the problem. A GE technician arrived today and almost immediately diagnosed the problem: a metal component that directs the waves of the microwave generation tube had burned out, and by federal regulation, he claimed, cannot be repaired - the whole appliance must be trashed and replaced. Once again, I have experienced GEs poorly engineered products that appear to be designed to fail in a relatively short time. Can you spell planned obsolescence? (No photo provided, as there is no external visual damage).

GE and this GLD5604V00WW dishwasher deserve MINUS 10 STARS. This is the single worst investment in an appliance that I have EVER made! What a waste of money and energy to have this thing. It worked properly through the 90-day warranty period and hasnt cleaned anything since. RUN, dont walk away from this purchase!

I have a GE over the range microwave oven purchased in 2011. 4 years old, hardly out of its service life. In 2013, while heating up my lunch, I heard a loud buzzing and popping noise. The plastic hooks that hold up a metal tray (yes, the unit comes with a metal tray) in the microwave oven caught fire. I called GE and demanded they repair the unit, they said they were not responsible since it was out of the warranty period. Having experience in the insurance industry, I reminded them about product liability, if this is a common occurrence, there would be potential liability issues for GE. The service tech said they would send someone out free of charge to repair the unit. He replaced the two hooks that fried and said they were no longer responsible for unit. Today, 01/28/15, we just had it happen again. One more hook caught fire. Hey GE, do you really think I will buy any kind of appliance from you again when you make a defective product and dont stand behind it? I will not. I would recommend people do your research carefully when buying a microwave oven, especially one from GE. I would recommend anyone do research when buying any kind of GE product since, in my opinion, they clearly do not care about their customers.