My dishwasher is probably 15-20 years old. It only is run about once a week but is still holding up. Does a pretty good job of cleaning but I do a pretty thorough wipe down before loading. Great value for the money. Hope you get a stainless steel version some day.

Last summer GE replaced the peeling handle on my microwave oven. I have treated the new handle with kid gloves. No abrasive cleaning products have been used and the oven burner under the handle is used infrequently at very lower temperatures. One year later its peeling AGAIN. All the burner control bezels on my GE Cafe oven have also peeled. The handles look like plastic covered with aluminium foil. Cant believe GE hasnt fixed this problem or issued a recall. I will NEVER purchase another products made by GE!

We had purchased the first listed model of dishwasher (Model PTD7505SSF8SS) and installed it on Aug 27/16. It worked for a total of 13 days and broke down on Sept 9/16. After a good deal of phone tag - a technician looked at it and said no less than 3 internal components had failed, the unit needed to be replaced. We were without the unit from Sept 9/16 until Dec 23/17 when the new replacement unit (Model PTD845SSJOSS) was installed. It worked for a total of 20 days and broke down on Jan 12/17. More phone tag... Tech looked at it and found a number of issues (motherboard, door switch, etc...), in addition - it had been leaking water under the dishwasher for the time it was in service. (All 20 days! What a record!)When a dishwasher leaks upstairs... It doesnt go well for the drywall ceiling downstairs. (The rep at GE was cold and calculated informing me that is what insurance is for!) Im not sure that is what someone who spent $1,699.00 for a GE product (in good faith of a reputable product) expects to be told by the individual who has the ability to make things right? At any rate, this is what you can expect from the trained professionals at GE. When they finally got around to looking at my file... They decided to simply replace the motherboard in the hopes it will fix the leak also.I would have liked a refund at this point (not likely) so I requested yet another replacement (given the issue of water leaking), they absolutely refused. As of this date Feb 2/17 we are still without a dishwasher. Goes without saying - no more GE products will enter our home and I will share, with everyone I can, the caring and kind words of support I experienced from the top level at GE.

I purchased a GE Profile dishwasher in June 2015. It was delivered dented.19 July it was replaced. The dishwasher worked for 3 months. Then it stopped working and the display panel had a LEAK DETECTED, DO NOT USE, notification. We contacted GE who could not find a GE repair technician to come and repair it in the entire BAY AREA. The dishwasher was bought at SEARS who refuses to take any responsibility.

Bought our GE Microwave (DVM1850DMWW) from Home Depot about 5-6 years ago. I can see a unit just failing; but to start burning, smoking and smelling is non-excusable. We were lucky enough to be in the kitchen at the time and catch the problem before it escalated. While the unit was just ok while it worked, potentially burning down our kitchen is inexcusable regardless of age. Time for a range hood and a small countertop model. A non-GE model.

My microwave is a very easy to use. The settings are not complicated and offers a variety of options. It has a shelf and turntable that can be shut off and on. The filters are very easy to access and clean.

Now out of warranty, my 4-year-old microwave (sadly, the top oven of a double wall oven), has been flaking and peeling paint. It is totally unsafe and unusable.

The key pad says it is shorted out and needs service. It turns on randomly. I unplug it and plug it back in and it will either say service needed, keypad shorted out’ or press clock .I dont use it much for microwave cooking. It came with the house we just bought and it only worked for 3 weeks before it started this mess. I could deal with it if it didnt beep all the time.

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

I had to place a new order for a trim kit for my new microwave oven since the original one did not fit. I was told it would be 5 days when I placed the order, then it was backordered for 5 days, then 7 more days and now 3 more days. When will I receive the product that I have paid for 3 weeks ago?

Not a very good job at cleaning, plus takes over two hours to run. It has a steam function, to help clean grease off of dishes, and should be used for simple cleaning too. Although the instructions state it can hold settings of 8, we have never been able to use more than 4 before it is packed. The utensil holders are almost useless. It has nice lighting for controls and a clean front. The installations instructions are not very good. They also did not include an elbow to connect to the water supply, which the hardware store manager said is standard connection, so GE just wanted to save $4.00 and piss off the customers instead.

We purchased a complete kitchen of Profile appliances. Everything is fine except dishwasher! The first one didnt clean food and left scum on everything... The company sent service several times replacing many parts.... finally gave us a new one... It still doesnt clean. It will not remove peanut butter, avocado, and my teacups are perpetually stained dark brown. My old dishwasher, Kenmore, left my dishes sparkling... no matter what was on them, plus I didnt have to run my kitchen sink to get hot water first! I will not use GE in my next house which will be built in about 3-4 years.

We purchased this new 8 years ago however the problems started after about two and a half years of use. I called GE when the paint started peeling off of the door of the microwave. They asked me if I cooked salty foods. I cook bacon in the microwave. They told me my only option was to buy a new door and have it installed. It was $250 at the time. I did not have the money or desire to fool with it. I continued to use the microwave and it has continued to degrade. Now eight years later there is so much metal showing that we decided we must do something. It is unsightly and very difficult to clean because its rusting. Ive been expecting electrical arcs to occur and the microwave to catch on fire. It hasnt done that. It has continued to cook the food. The entire metal area on the door is without paint. There are other large areas of metal and rust inside on the bottom of the microwave. The entire vent panel is without paint and rusted. We also had to have the control panel replaced twice. It was covered once under the warranty and once it was not. We also had to replace the element in the oven which is used rarely. To replace the microwave and oven combination now would be $3,500. When I do replace it I will replace it with a different brand.

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

We purchased a Profile Dishwasher, Stove, Oven and Microwave. So far weve had problems with all products especially the dishwasher. The bottom of the dishwasher is filled with water, the door has water running down the front and all dishes have to be dried. I have talked to GE and I was told the new models do not have a drying system as in the past due to EPA. I feel like we have spent thousands of dollars for items that are trash. Had I known I would be drying dishes I would never bought GE products. I would trade this GE for a SEARS in a minute but too late. Ill keep calling GE office, maybe a miracle will occur. Ive tried all the tricks in the handbook... doesnt work.

My microwave was purchased 2.13, costing about $500. The panel shorts and I paid for one GE visit, $150. And it happened again. My friend was here and said hers does the same thing. She has a neighbor with the same problem. I researched online and learned quite a bit about this machine. I found out that the panel shorts when youre cooking under it, and steam/heat rises into the machine. Makes the panel short. Im now demanding that GE return $150 service fee that I paid before I found out that its a defective machine. And this machine has to be replaced with a model that allows cooking with vents on. If GE does not do the right thing, I will make it a life goal that no one buy their products. Mark my words. Im this angry because I called customer service this week and was told that theyll give me a new panel but I have to pay for the labor and no refund for the $150 and no replacement microwave. This was insulting. Shame on GE.

We bought a new $700+ Stainless Steel dishwasher 10 months ago. It has failed on several occasions, and we have been without a fix or replacement for months. We are forced to have 5 service calls, none of which have fixed it. We have been hand washing for a family of 6 for months now, and GE Consumer Relations is totally unwilling to replace it, but rather continue sending out the same service tech with no new parts or ability to correct the problem. It is the definition of insanity while we are left holding the bag. Totally unwilling to do the right thing and it is maddening to say the least. 3 months of back and forth about our need to have it replaced, and their answer is send another service person who are now 0-5. This is the worst customer experience I have ever had in any situation for anything.

I bought this microwave about 2 years ago (2011). Yesterday the microwave turned on by itself, I tried to stop it by hitting the clear button that didnt work so I had to unplug it. When I plugged it back in it seemed ok so I reset the clock but within minutes it started again, this time the key pad read key pad short-circuit and then went blank. I am glad I was home when it happened. I am now wondering if I should repair it or replace it.

I purchased this dishwasher (GE Dishwasher Model # PDWT180RSS) at the beginning of March and it has been nothing but a disappointment and inconvenience. Nothing gets clean. It has been serviced 5 times and I have a case # with GE. They have serviced the jets, used 3 different kinds of dish soap, checked the water pressure, temperature, and drain and still it does not work right! What a hunk of junk. Dont buy GE products.

New home community - all GE appliances. Model PEB7226SF2SS microwave scorching and catching on fire; GE doesnt stand behind their products and homeowners cant use because products our dangerous (per tech).

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

GE Profile dishwasher - model # PWD8280N00SS - Appears that moisture got between the exterior panel and door that houses that main board. Because of the moisture caused a short that melted the main board, with harness and the ribbon from the on/off panel that connects into the main board. Luckily I was home at the time or this could have caused a significant fire damage in my kitchen.

5 years ago I updated my complete kitchen with Adora LG appliances. To my dismay, the handle on the microwave (Model DVM1950SR1SS) began peeling like paper. Now I have a white plastic handle that’s supposed to be stainless steel as an eyesore in the middle of my kitchen. When I called GE replacement line, I was informed the handle was $164! My 5 year old kitchen is out of date! As far as I’m concerned this is a defective part and GE should replace it at no charge. I have been a faithful GE purchaser for many years. After this mishap, I will no longer recommend GE appliances or will I purchase them.

After writing my review I was in the process of ordering parts for my dishwasher. I had a representative of GE in the parts department connect me to a GE manager. He was very helpful and understanding of the situation and helped resolve the issue with my dishwasher. My issue was with a customer service representative in the recall center when I inquired about anyone else having issues with their dishwasher and if there was a recall on the machine I purchased. Since I did not have an extended warranty the person I was talking to was extremely rude and would not answer any questions or concerns I had with the machine. I was not pleased with the customer service reps attitude and her ability to deal with the public.

When the handle on my expensive replacement (GE Profile for GE Profile) microwave/convection oven peeled, we called our retailer (PC Richards is really good about service). A new door showed up and it, too, has a plastic handle. The difference is, this time its solid grey plastic as opposed to white plastic with silver paint. Seems to me that an expensive SS appliance should have an SS handle. Too heavy? Just use a tube of SS - not solid. Too hot if above burners? Didnt my last GE Profile micro/convection have a SS handle? I spoke with customer relations. The person was well trained not to say anything that might suggest she agreed with me. Since the issue is cosmetic and not functional, I have to consider the issue dealt with now that the door has been replaced. I told them I will do my best to publicize this issue and that I will never again purchase a GE appliance. I also called CEO Jeff Immelts office in Connecticut. I made it clear that my dissatisfaction has cost them a long time, loyal customer and that I would spread the word. I would appreciate if anyone agrees with GE that a SS handle would be too hot over stove burners.

I purchased the GE Caf Advantium Oven Model No. CSA1201RSS. This is supposed to be one of their top of the line Microwave/Speedcookers and at $699.00 it should be. Within the first few months with little use, it made a loud buzzing sound and it went dead as if the breaker tripped. It was under warranty and a GE tech came out and repaired it free.The problem was the Magnetron, a key component inside the unit. I was shocked to see that the Magnetron was made by LG. I bought a GE because I did not want an LG, but I ended up with a GE with LG parts. The unit worked for several months and now it will not heat anything. I have only had this unit for 13 or 14 months and it is broken for the second time. I called the 1-800-GE-CARES to learn that they do anything but care. They told me it was out of warranty, but the parts are covered.It will cost me $99.99 for the tech to come out plus the cost of labor to repair the unit, which varies based on what needs to be repaired. This is unacceptable. There is clearly something wrong with this unit. I have had microwaves last 10+ years with no issues, and one of them was a GE! I thought GE would stand behind their products better, especially since they can see I had prior problems with this unit. This is a $699.00 tin can.

Does not hold as many dishes, pots and pan as my previous dishwasher. In the bottom rack I cannot place plates and bowls side by side. Rack is too small and the gray interior is too dark. And the top rack does not hold the glasses in place, already had one break.

I am so disgusted. My 1 year and 2 months old microwave could have burned down my house. It got very hot so much you couldnt even touch it! Microwave product code JES1344SK. This should be a recall and customers should not need to have to pay for these to have them fixed. GE should be grateful this didnt start the house on fire and no one was killed by it! I will never by GE again!

I purchased a microwave in Oct 2010. It went blank and nothing works. I checked to see if its receiving power. The power is okay. I purchased the microwave, fridge and stove at the same time. I always had confidence in GE products. Microwave should have lasted longer than less than 2 years. I didnt purchase extended warranty because of GEs reputation. Very dissatisfied customer.

After a year and 1 day of use the microwave blew out and got in fire. Fortunately I was nearby and was able to extinguish the fire. I called the customer service that told me the warranty was over and all they can do is give me a discount on the purchase of another unit, and that I was on my own for the collateral damages due to the fire!

The GE microwave installed in my new home caught fire on its own. It is less than 3 years old. GE Consumer Relations Department refuses to replace it for free even when it caused a fire accident on its own. GE microwave failed in its safety standards. GE also has failed in its Consumer Relations. I will not trust GE brand again.

We purchased our Adora over-the-stove microwave oven from Home Depot. The Adora brand is made exclusively for Home Depot and were sold on its special functions and value. Well now, 3 years later, this exclusive models glass fogs up when we use it. There are only 2 of us living at home. We use it maybe 4 or 5 times a day. A microwaves typical lifetime is 9 to 10 years. Also, by the way, when we turn on the fan to highest, it sounds like an express train hurtling through our kitchen. Our dog had a heart attack and died the first day we operated it. No he didnt. We dont even have a dog. But you get the picture.

My dishwasher broke within warranty in April 2014. The warranty expired on April 29th, 2014. Every 2 weeks another part was ordered to the tune of 10 parts and 8 visits (unpaid work days for me). I have been in touch with consumer relations about this and I was told that this would go on forever until their techs deemed the dishwasher as unrepairable but as long as it is repairable, they will not exchange the machine. And now they are telling me (October) that I could have had another service provider fix it but I would have to pay for it because NOW it is out of warranty. I cant wait until I replace my GE refrigerator and my GE microwave because those are the last GE products that I will ever buy. I went out last month and bought another brand as I will never buy GE again. GE protocol I am told is what determines all that happened. I suggest you do the same. I am writing a long letter to GE just to get it off my chest. Nothing will be done because its another corporation all about the money!!!!

Has anyone experienced a plastic burning smell when the dishes are drying? My dishwasher is 3 years old and I wash on Light cycle which is suppose to be 45 minutes long but goes for 85 minutes. Company said to turn off circuit breaker and turn back on and it should be fine, it isnt. Last two times I used the dishwasher it wouldnt completely shut down so I had to do it manually and before I did this I could smell a plastic burning smell but there was nothing on the elements. I called for a service call but they were shut down for 4 days.

I purchased a slate dishwasher in Oct, 2014. After the third cycle the soap would not dispense (door would not open) or the soap dribbled out and remained running down the door. I had to run the cycle twice to get the dishes clean and for the soap to dissolve. I called the store at which it was purchased. A tech came out and replaced a part. Did not work. After the second time, when the tech said nothing was wrong, even though he saw the soap running down the front door, I called GE. They sent a tech from a different store. After the eighth repair I told them I wanted it replaced. They had already replaced the soap dispenser twice, the control board and even told me to move the baskets (ridiculous). They also suggested I run hot water before the cycle! They said if it was repairable they could not replace it.We went back and forth with this and they finally agreed to replace it. Got the new slate dishwasher in July, 2015. After two cycles I started having the exact same issues! I will not deal with GE or ever buy another of their appliances. I will tell everyone I know not to deal with this company. Quality is terrible and service was extremely frustrating, having to take off work numerous times and wait hours for the service person. In the end, it never worked!

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

After my previous GE Microwave had paint peeling, I was offered a new one at a discounted price. The new one will not make popcorn. It does heat water, but a small bag of popcorn takes 4-1/2 minutes for 1/2 bag. I called and they sent a repairman. He made a bag of popcorn, told us to use a different setting. Tried that and it still didnt work. Then he heated a half cup of water and declared it works fine. It does heat. It just wont make popcorn. He said they changed the design due to people starting fires making microwave popcorn, but that could just be a easy lie. Said There is nothing we can do about it. Just dont make popcorn, eat chips instead. What???

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

Last fall, we updated our kitchen counters to quartz, and the Jenn-Air to a GE induction cooktop. While it is indeed pricey, the joy of cooking is not overstated here. The quick heat up, the ease of controlling the heat more precisely, and the easy clean up makes this unit well worth it. I love it!

I have had my GE microwave for over 6 years and the paint is flaking off the inside of the microwave, causing a health and fire hazard. Paint chips in the food and bare metal exposed can cause arching which in turn can be a potential fire hazard. After researching online I have found that this is not a uncommon problem with GE microwaves. Some have had this issue after 1 year. I contacted GE and told them of the problem and that I felt this was a manufactures defect.GE does not feel that this is a defect problem but advised me not to use the microwave any longer. Their solution was to discard this microwave and purchase a new one. I paid almost $300.00 for the original one plus $20.00 for a mounting kit. I was told that GE would offer me a discount on a new one from $339.93 to $319.93 total. This is not much of a offer considering this should be a obvious manufacturers defect. By ordering another I will have the same problem again. GE needs to stand by their products and admit fault.

Seems to be a lot of wasted space in this GE dishwasher. If it had a 3rd rack then I would rate it higher. The back has additional sprayers, but the sides do NOT. I would think that having sprayers all the way around would help with sanitation.

The dishwasher has had a long life and other than some of the inner pieces breaking, of which we have had to order parts and fix, It has been a good washer. The top rack has tons of room and it has the Stemware rack which is really nice. I wish it had a larger rack for silverware, which fills up fast. I like that can Open and add without having to reset. I LOVE the Simplicity of the Selections.

I give it stars for value because an extra step is needed to set cooking time. Most microwaves do not require pressing a cook time key before selecting # of seconds. Other than that, microwave is first-rate and very dependable. We use it several times a day for 1.5 years now with no problems.

Bought a new GE microwave cafe series in May 2014. Within one month the handle which was not stainless steel started to peel and cut my wifes hand. GE sent a replacement new door for the unit that did not close. Then he had to transplant the handle from the new door to the old door. A month later the unit failed. A new replacement unit took 2 months to replace. It has worked 3-4 weeks and has also now totally failed. Our experience with GE CAFE microwave and GE service process is poor to miserable. I would not recommend this product or their service to anyone.

Have been using dishwasher (PDWT380VOOSS) since May 2013. Dishes do not come clean and I rewash by hand... have followed all suggestions by consumer relations, service technician and manual…cant afford to replace appliance…GE willing to replace at an aggressive discount because the appliance is working as it was designed to…disappointed in performance of a profile appliance.

I bought this Microwave JVM3160 on December 2016, after six month the handle door broke but it was replaced as part of the warranty. By January 2018 (no more Warranty) it began tripping the circuit breaker. I change the power source for a dedicate circuit only for the microwave 20 AMP. The microwave blew its own fuse. I replaced its fuse. Then it blew the 20 AMP circuit breaker. That was enough. This microwave went to the garbage after 1 year and 2 month of use.

After 6 month of leaking brand new dishwasher, 5 appointments of technicians that are lazy and lying on their reports, as well as have no clue what are they doing, with unreachable Case Manager and complete unprofessionalism. This is so far the worst experience in appliance purchase. DO NOT BUY GE APPLIANCES! DONT WASTE YOUR TIME & MONEY!

Dishwasher has been running 3 hours and it still has not finished. It is the loudest dish washer I have ever owned and this is the 5th house I have owned. To top it off I just paid $270.00 for a GE professional to come to our house to troubleshoot our problems and it fix the issues. Guess what, problem not fixed and GE has my hard earned money. Thanks, GE.

I have a GE over the range microwave oven purchased in 2011. 4 years old, hardly out of its service life. In 2013, while heating up my lunch, I heard a loud buzzing and popping noise. The plastic hooks that hold up a metal tray (yes, the unit comes with a metal tray) in the microwave oven caught fire. I called GE and demanded they repair the unit, they said they were not responsible since it was out of the warranty period. Having experience in the insurance industry, I reminded them about product liability, if this is a common occurrence, there would be potential liability issues for GE. The service tech said they would send someone out free of charge to repair the unit. He replaced the two hooks that fried and said they were no longer responsible for unit. Today, 01/28/15, we just had it happen again. One more hook caught fire. Hey GE, do you really think I will buy any kind of appliance from you again when you make a defective product and dont stand behind it? I will not. I would recommend people do your research carefully when buying a microwave oven, especially one from GE. I would recommend anyone do research when buying any kind of GE product since, in my opinion, they clearly do not care about their customers.

Soon after getting our new Cafe Microwave CVM2072SM3SS the control panel died. I called GE and power cycling got it going again. This is an over the stove microwave, so we were also told by GE not to use the right front burner without the fan on boost. The problem persisted from time to time and steadily got worse over our 5 years of ownership. Reading the internet this was a common problem known to GE but they took no action to contact owners. The panel is now dead and my only option, having tried the fixes on Youtube, is to invest money starting at $108 for an inspection or buy a new Microwave. My entire experience with this product has been a big disappointment as I also own a GE Cafe range, fridge, and dishwasher.

We bought a model PVM9215SK3SS microwave as part of an over-the-range microwave oven/extractor fan combo. Unlike every other microwave combo weve ever had in our frequent moves, this microwave cannot run the kitchen timer independently of the microwave. If you try to set the kitchen timer when the microwave is running, the cook-time changes and overcooks whats in the microwave. If you try to set the microwave to cook while the timer is timing a food cooking on the range, it simply refuses to work. The instructions are very hard to both find and then understand, having been written in China to cover many different models. Apparently I can ask my phone to turn it on. I sure cant manage that very often in person! The fan is too loud for comfortable use even at the lowest speed, which is a great disappointment. A former Profile model was very quiet at every speed, and much more efficient. Were saving up for something that works.

GE microwave oven (jes1651sj02) started to spark like lightning, which can be seen through the inside vent grid/grill located on the right. Sparks are seen just behind the waveguide cover where the magnetron is located. It seems to be a common problem with GE microwave ovens from what I have researched. The microwave has now stopped working and just makes an odd noise like groan or urrrrr. It’s just over 2 years old. Its a piece of **. It should last 10 years or more, like my last 2 have. I gave away our Sanyo because it wouldnt fit the decor of our new kitchen - wished I never had.

This is the second time GE has replaced the unit. The paint is peeling. The microwave is all rusty. The same thing happened to the first one too. It looks disgusting.

GE microwaves are crap. In fact its not restricted to microwaves. Its their ENTIRE line of appliances. They team up with other grade e or f manufacturers for appliances (ie: LG, Samsung) and ANY GE appliance is almost guaranteed to fail prematurely. I see all these comments bucking Malaysia and in all reality the fact remains that Malaysia makes damn good stuff (think SONY). But it is the COMPANIES that build the products and how much theyre getting paid that factors quality. No doubt that GE is using the bottom dweller rejected off the assembly line parts to build their units. Most are Chinese garbage. China also builds some very reliable products but as the saying goes dumb American will buy anything. They save the best for them and sell us the crap.It is the lowest grade of those already should have been scrapped at the factory parts that GE passes off as quality and they do a good job at showing it. A cheap 30 dollar China made Emerson microwave made by Daewoo (Korean company that actually is decent) lasts longer and takes a hell of a beating compared to the overpriced rejected junk we call GE. The GE ac units are another classic example of pure garbage. Sadly the older GE works forever. That should sum it up. Why didnt the GE executives while visiting Thomas Edisons grave make every effort to step away from his grave and not stand upon it? Because Thomas Edison would pull them under.

My GE microwave also has paint peeling off the top inside and bottom with rust as well. And cannot be repaired but not one person has said they were sorry or even owned up that it is a fault in paint. This is disgusting to think about this stuff falling into your food!!! This is not safe at all and 10% off new unit is not nearly enough considering they are up to $3000.00 now for microwave/oven unit.GE does not stand behind their products and it shows!!!!

I bought GE dishwasher model #GDF570SGJOCC from a local appliance dealer in April, 2017. The machine cost about $600, and $150 to install. Today I learned the circuit board is caput and it will cost $600 to replace it. I will never again buy a GE product-- 2 years of service and it needs to be replaced.

Its been more than 2 months that GE repair has been TRYING to repair my 4 month old dishwasher. 4 service calls, 3 wrongly ordered parts, GE blaming repair company, and repair CO. blaming GE. The repair company on their 4th visit told me wrong part again and that they refuse to come out anymore. They lost enough money already. When talking with GE consumer Dept. promises of a call back by a manager has been non existent, now they wont even return my call. I have a 5yr extended warranty on the dishwasher and I cant seem to get anywhere with the factory warranty. GE by far the most unprofessional company I have ever dealt with. They were happy to take my money for 4 top of the line appliances, after that youre non existent to them. Its a shame that legal counsel is what seems my only avenue. Will never consider buying GE products ever again.

We did not choose our dishwasher. It was installed by the builder but its served us well for the last 3 years. Its good quality and cleans the dishes well. It is also relatively quiet while its washing.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

The GE microwave model CJES1290Ml01 does not get used much, maybe 15 minutes per week. I have not even used convection oven or broiler part, so we could say very gently used. Sparks and grinding noise out of the magnetron tube area started recently and there is no metal in the microwave. It arcs like there is metal. There are not enough miles on this equipment to need replacement, but it is too expensive to fix. Im not happy with Walmart GE product. Did they cheap it up?

Don’t know the exact model type but it’s a built-in unit as opposed to a counter top type unit. It’s installed on top of a GE oven. Have had no issues whatsoever since purchasing the house in 2008. Barely no maintenance required aside from the normal cleaning of the inside of it and even that is pretty easy.

The GE repairman just left. It wasnt the coil that was flaking, it was the eco dish washing detergent I was using. The detergent wasnt dissolving, it was clogging up the jets and burning on the coil. What I was seeing was black burned detergent flakes. The repairman gave me citric acid to use to clean out the clogs (for free). He also didnt charge me for the visit, even though it was my fault. He also told me to get the water in my sink really hot before I start the dishwasher. I am very impressed with his service!

JVM6175SFSS - I purchased this over the stove Micro in July 2014. When I cooked a potato or frozen meal it would sound like it was going to explode. Condensation drips down behind my stove and the window and door to it get all steamed up. The fan clears the door & window but is very loud and intrusive even on low. Besides that I have never needed to use a fan when I use the microwave. GE repair came and said there was nothing wrong with it. But after thinking about it, came back the next day and took it apart. The tech called GE engineers and described to their amazement the way the inside was made. They said no way. So the tech took pictures and emailed them to GE. They reviewed it and said thats the way it is. I wouldnt stand for that and called them again and told them that the bottom of the micro gets scalding hot. At that they changed it out.... for another one with the same problem. The wall behind the stove is getting ruined from vapor dripping and all the same problems exist. They will be coming again and I am going to insist they take back their junker and let me buy a safe microwave of another brand even though my other appliances match. I am sorry now that I bought my GE stove and refrigerator now because they match the micro.

I purchased a GE microwave just a year ago. Ive had a few problems with it like the round glass plate that you cook food on cracking in half twice when the microwave wasnt even in use, and the control panel going stupid... requiring me to unplug it to get it back on track. The worst part is I purchased an entire kitchen work of GE appliances at the same time and Ive already had two service visits on the dishwasher.GE customer service is the worst! When I call they just keep repeating themselves and they never listen to what Im telling them. Today was the worst yet... I got this woman on the phone and she just kept telling me the microwave was not in warranty any longer as of last month. She also told me she only has two appliances listed on my account (no range or refrigerator) when they were registered at the same time as the other appliances and they have sold me filters for the refrigerator several times. All I can tell people is if you are considering buying GE appliances... DONT! They SUCK!

Generally ok, but the entire wash cycles take way too long. Certainly much longer than the older models. I guess thats more or less the case with most dishwashers today. It makes me hesitant to use the dishwasher when I consider all the energy it takes to function. I would prefer having a setting for speedier rinse/wash of just a few dishes.

My GE microwave oven died after 4 years. And my GE washer died after 5 years. Never ever buy a GE appliance. The market agrees, because their quality issues might be the reason the company has not been able to sell their appliance division for several years now.

This machine washes glasses sparkling clean with the use of a rinse additive. I like the fact that it has a top, middle and bottom spray blade; it has a moveable silverware bucket; it is very quiet; it provides that you can wash the upper level separate from the lower level. It seems to make use of the maximum amount of space inside. The appearance is sleek and modern. During the first few washes there is a distinct heated rubber smell that emits from the machine; however, this should dissipate completely by the fourth, fifth or sixth wash.

Have a six-year-old GE Tall Tub Café dishwasher (model#GHDT168V00SS) I purchased at Home Depot in Denver. Also purchased a 5 Year Extended Warranty that I assumed was through GEs Extended Warranty Opportunity. The dishwasher suddenly began leaking and ruined our hardwood floors (I know, wood floors in kitchen not good; tell that to the builder). I called GEs customer care number and basically talked to a scripted robot. You dont have a warranty through GE, its a third-part insurer such as Assurant, I was told. Not worth repairing, and the warranty expired a few months ago. I know parts wear out, but for heavens sake, cant they build a dishwasher that doesnt leak from the bottom, underneath the unit, where water will seep unbeknownst to people, eventually destroying the floor? Guess not. So, no more GE appliances EVER. PERIOD! Switched to Samsung, LG and Maytag. Now, gotta spend a couple grand ($2K+) to repair the hardwood floor.

Have had my GE dishwasher for 15 years. Had initial problem with inner liner pulling away but got GE to replace unit. Has worked fine ever since. Nothing fancy just gets the dishes clean. Would have liked a bit more adjustability with the shelves.

My GE microwave (Model: JVM1540SN1SS) that I bought new two years ago for $250.00 broke already. The table doesnt turn and nothing heats up even though the timer works. There are only two adults in the household using it, and we dont even use it very often. I find this pitiful service. My last microwave lasted about 15 years.

GE Profile GLD4408RBB: Bought this dishwasher at Home Depot 2010 for our FL condo. We visit there periodically, dont rent out. We have used this dishwasher probably 50 times since buying. It never wash dishes well, leaving residue and we do clean them first. Now it doesnt drain; seems like pump not working. Its only five years old and hardly used. Its not worth having a repairman for labor and cost of parts. Very disappointed with GE product and wont buy another one.

I have no idea how long it has been in this house but I bought the home 11 years ago and it’s still going strong. I do have to clean it on occasion. And I use jet dry with every use. And occasionally do buy a dishwasher cleaner.

Ive been battling this dishwasher since it arrived 9 years-ago. It was a warranty replacement we were stuck with from GE. Plus, we paid $300. We could never get it to clean dishes, no matter how we loaded it or what we used, so we gave up and hand washed dishes for years. This year, I am committed to getting the dishwasher working because of hand eczema. I took it apart and cleaned the sprayer arms, filter & wiped it down completely. I also ran a dishwasher cleaner through it. I finally got it to clean dishes, but only if they are thoroughly rinsed first and on the Pots/Pans setting. After a month, it stopped cleaning my dishes again. I took apart the dishwasher again, and cleaned everything. Now, glasses on the upper rack in the back are not all getting clean. I never overload it. Im convinced that GE Dishwashers are just junk. Someday, Id love to find a dishwasher that actually works. :-( Frustrated!!!

From these posts, Ive seen people saying that they couldnt trust GE American-made anymore. Our microwave oven was made in Malaysia, but GEs home office appears to be in Louisville, Kentucky. Our problem: peeling paint on the door and upper part of our 2009 GE #JES1451DN1WW oven. As a cancer survivor of 8 years, my antenna goes up with any defaults such as this. On a common sense scale this should never be happening. I was very sad to see no recalls on these items Ive been reading about and am frankly scared to use this microwave. Shame on you, GE.

In January 2013, my husband and I purchased new appliances from Home Depot, including the above referenced dishwasher. The first dishwasher was delivered broken. The display panel was detached from the body of the dishwasher. At that point, I was concerned about the quality of the product. From the way it was detached, it appeared to be very cheaply made. (It was also installed incorrectly, causing a leak under our sink and ruining the bottom of our cabinetry. We settled this with Home Depot, but I include this detail to help emphasize my frustration over this whole situation.)When I contacted Home Depot about the faulty product, they agreed to provide a replacement, so I decided to give it another try. I wish now that I had simply returned the product and purchased another brand. Upon receiving the new dishwasher, I noticed immediately that the edge of the inner rack was scratched so badly that the plastic coating was gone, and rust had already begun to appear. I had to call customer service and get replacement racks. (More on this to follow.) Allow me to detail our service call records:Call #1. Heat dry didnt work at all. The technician told me that I needed to run the water in the sink and make sure it was very hot before running the dishwasher, and he changed the settings. This created a slight improvement, but not much.Call #2. Soon after, detergent tabs started to get stuck in the dispenser cups. I was using the exact brand recommended in the manual. The technician told me that detergent tabs were just the worst, and that I should try gel detergent, even though this is contrary to what the manual states. The detergent ruined my silverware, and I have had to purchase a new set, which I now hand wash.Call #3. Using gel detergent did not work. Technician came back, and told me the wrong replacement racks were sent. That must be what was blocking the water from getting to the soap. He ordered another replacement rack. He brought a plastic door, watched the water, and told me the upper arm wasnt spinning fast enough. He made an adjustment and claimed to fix that.Call #4. Detergent still not emptying from the cup. A different technician came back and used the plastic door. He found a different problem, but did not have the parts to fix it, so, another service call had to be scheduled.Call #5. Technician comes back, and finally fixes the detergent cup problem. For now.Call #6. Heat dry now does not work at all. There is so much water on the dishes that I have to hand dry them, and afterward, I have to mop my floor. There is just a massive amount of water in the dishwasher. In addition, it will not start except on a one-hour delay. Pushing the delay button does nothing to change the settings, and does not allow me to scroll through like it should. This appointment is scheduled for today, but I am not hopeful that anything will change.At this point, I have no faith that this dishwasher will ever work. Customer service did extend my warranty for six months, but that is the only concession I have gotten from them. That extension will expire soon, and I fear that at that point I will simply have to spend another $600 on a new dishwasher and leave this one on the curb. Its unacceptable for any consumer to have to purchase a new dishwasher less than two years after purchasing from GE.

Front of door never seems to clean up well and its stainless steel. Occasionally if you use the start delay and a harder pod it can stick and not dispense fully during wash leaving a chunk of it. I love the ability to run half loads. Smartly designed, and easy to use.

We have a GE PROFILE dishwasher that has served us well for several years. Tonight, however, while it was doing the dishes the main circuit board caught fire. After turning the power off and trying to blow out the flame, we opened the door cover to find the main circuit board still smoldering. One of the relays on the circuit board had caught fire and started to burn through the circuit board melting it, the plastic cover and the wire harnesses. We were lucky to be home and awake when this happened and were able to take care of it. If we had been gone or asleep we probably would have lost our home!

Our GE Spacemaker XL microwave stopped working on 7/11/12. We purchased our house in January 2000 with the microwave included and have not had any problems with our microwave, until yesterday, when we woke up and tried to pop the kids breakfast in for a quick heat and it made a strange humming noise and you could smell plastic melting. All power was quickly turned off to the unit. Now to find a replacement for this built-in microwave is going to be a problem. The local technician stated the blower motor we need is no longer available. Thanks, GE, for at least 12 years of excellence. We are now looking for a similar replacement.

GE is a very reliable name brand with history to back it up. I’ve used their washing machines for years and only changed out once due to newer features. I had Thebes first washer for at least 10 years, maybe a little more. It only needed one part replaced, that was the capacitor, otherwise it was still usable. I am not an in depth handy person but I will read and do my research and found directions doable. Additionally, I found the service help desk very informative and that’s how I discovered it was the capacitor that had gone bad after washing clothes for so many years, and believe me, I did a lot of cycles with my kids and family. I feel I got more than my money's worth. Lastly, I’m still using their products to this day. I may not have the frequency because we are empty nesters but I still believe in their products,

My GE Dishwasher is disintegrating. Its three years old and we didnt live here for a year of that time. The door where all the electronics just fell apart. I bought the most expensive GE Dishwasher I could find at that time because we wanted one that was quiet due to the way our house is laid out. We were able to put the door together again but the strip across the top never fit again so we taped it on. Model PDT750SSF1SS. The controls wont work.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

My Microwave oven is 22 years old. It still works fine, but does not have power levels on it. The reheat is vague and I have to keep checking so things dont burn or dry up. The dishes get very hot after about only three minutes. Other than that, it is easy to clean and still looks good.

One of the most disgusting situations I have ever been in. I purchased a brand new home with all new GE appliances. I have since learned that a technician was sent out twice prior to our walk-through because the superintendent noticed the dishwasher wasnt working properly. I registered all my appliances online. The first time I used the dishwasher, it flooded the kitchen floor, causing the builder to have to repair baseboard and drywall. A technician came out and repaired it. I used it an additional two times and each time I did, it flooded my kitchen and a repairman came out. After the second time, I contacted GE customer care to open a case. The third time, I requested a new dishwasher and the customer care agent, Stephanie, stated that my new dishwasher was a discontinued model and so she suggested one that was a slight upgrade. I agreed to this change and she informed it would take approximately 24 hours to have it approved. I have since talked to seven different people at GE customer care. This was started when a company called Barlows Distributing showed up unannounced at my front door approximately hours after my discussion with GE. They said they were here to install my dishwasher. I was rather shocked, said the timing was impressive, and let them in the door. After they had drained the water standing in the then current dishwasher, they started to put in a replacement. I looked at the box and realized they were placing the same model in. I told them that was unacceptable, because according to GE, I was being approved for a different dishwasher. I then told the tech to stop installing it and called GE. GE had no idea where this dishwasher had come from. Then an unavailable number showed up on my cell phone and when I answered it, the woman spoke my first name and started talking about my dishwasher, stating the builder had ordered a new one. I asked her who she was twice and she would only tell me GE customer care and not her name. I have since learned her name was Julianna. She said that I had to take this dishwasher or I wouldnt have one at all. I took this as a threat. After spending countless hours on the phone with GE opening a case and discussing the issues, picking out an acceptable replacement, I was then told the builder made this decision. Not only was I thrown from person to person over a discontinued model, I was threatened, and further was told by the superintendent of construction that once the dishwasher was installed and we closed on the house, I had to handle all problems through GE. I own the dishwasher, not the builder. I registered the warranty, and I handled it through the proper channels. I feel I need an explicit apology from GE. One of their arms doesnt know what the other arm is doing. During this entire time, I had little use of my right hand and seven fractured vertebrae (for which I am permanently disabled) and had to physically wash 10 boxes of dishes that had been packed up due to our move and stand while doing it. GE has caused me property damage, stress, and severe physical pain, yet threatens me and yanks me from person to person.This is my house, my dishwasher, and this matter should have been handled directly with me, instead of inviting someone into my house that I had no connection to or knowledge of. The really sad thing is that I just purchased and had installed a $6500 water softener and reverse osmosis system for the whole house, manufactured by guess who...GE.

Our GE microwave does all the things you would expect from a basic microwave. It cooks vegetables, reheats leftovers and warms coffee. It looks nice on our counter. Do I think it is worth the money we paid for it, NO.

GE dishwasher GDT680SSH2SS - I don’t normally do product reviews... In this case, I am making an exception. This is without a doubt the very worst dishwasher I have EVER owned. I’m pleased with myself for buying the optional insurance when I bought the dishwasher from Home Depot. It has been repaired 6 times. It even had to have the main seal replaced. It flooded my kitchen and ruined my floor. My homeowners insurance sued GE. I think it worked fine for only 6 months...then it went downhill. It is extremely loud! It sounds like your dishes are being destroyed... No, I’m not exaggerating!I have NEVER had issues like this. I bought this GE as I really like the screen bottom so that large particles didn’t get caught up inside the pump etc... As I’m typing this, I have it set for Sani wash and the water isn’t hot at all, and it had standing clean water in the bottom when I opened it up this morning. I will also note, I rinse all my dishes before putting them in. I will never buy GE anything again.

Great microwave I have had for almost 10 years. It works like new. Its a name you can trust and not expensive at all. I have always believed in the GE name and their products. I have a dishwasher and dryer that work just as well. I will continue to buy GE products.

I bought a GE Adora dishwasher from Home Depot. There is nothing technically wrong with it - in other words - it is not malfunctioning. It is just that its normal operation is AWFUL, in my opinion. The PROS: it is very quiet. The CONS: it does not clean your dishes! And since this is the primary function of a dishwasher - I would say it is a complete failure. Originally, I had hard water, and I thought that was probably the issue. I purchased a whole home Kinetico system, which remove almost all particulates from the water, and makes bottled-water-quality drinking water. (On a side-note, I would TOTALLY recommend the Kinetico system!) But even after having the water issues fixed, the dishwasher has NEVER worked properly. I have used every type of dishwasher detergent, including Cascade Complete & Platinum, Finish Ultra & Quantum Powerball... and I have also added rinse agents etc. Basically - whatever state your dishes are in when you put them IN the dishwasher, they will only be slightly improved when you remove them. Even if you SOAK the dishes first, they come out with all kinds of residue. It does an especially horrible job on glassware, but silverware is also terrible. And I have to re-wash by hand every coffee cup that comes out. I truly loathe this machine, and will replace as soon as I do enough research about a better brand & model.

Microwave Model HVM1540LP1CS... This microwave was installed 6 years ago when I built my home. I live by myself and the microwave has only been used by me. I loved this microwave until suddenly it began to turn on by itself and I would often hear popping noises. I looked up reviews of this GE microwave and found that this is a frequent problem with GE microwaves. Fires were reported in a couple of reviews so I immediately unplugged mine, as a safety precaution. If this happens frequently with these microwaves, why isnt GE replacing the parts for the defective machines since they can be fire hazards?

Our GE microwave/convection oven model number JES1290SK01 is making grinding noises and has caught fire once on the side panel. We have owned this microwave for only 4 years. It was a terrible investment. No wonder Obummer had to bail them out. That is the quality the unions are currently producing. It’s sad really...

I rarely use it. I know to avoid too close to the signals produced in the microwave and use it only about once a month.

Absolutely silent! Several features and cycles such as crystal, normal, pots and pans and drying options such as air dry or heat dry. Standard size dishwasher. The key is in the loader. Stainless steel with no handle or anything plastic. Flush. Stainless interior as well. It did have a food disposal but to avoid smells since we start the dishwasher only twice a week, we rinsed off our dishes. Another important element we learned from the previous dishwasher is to use the heat dry if you want your load to be dry with as little puddles of water as possible.

Have to rinse dishes clean before I put them in. Otherwise they will not get clean. Does as well as most other dishwashers- until you get into the very upper end ones. The racks are good size. The outside is nice looking.

I brought our brand new home just over 1 year and 8 months ago with all new GE appliances. One of the GE Smart Built-In Double Wall Ovens, the bottom one which we never use, but the inner glass shattered randomly, very dangerous and they want us to pay them $100 for the inspector visit and then more for the par and service $325 for the replacement, the GE is disagreeing they had a defect on installations. That is an experience that we never repurchase GE brands, my friend had the same issue. They replaced in their house this way without warranty, however they disagreeing our oven had the defect on installation, lesson learned, never never buy the GE again!

This microwave is nearly 20 yrs old and is still working great. We replaced the handle but other than that it has been great. I would definitely recommend the GE brand as it has been very reliable. I give this product a great rating.

I have been trying since April 4th to get my GE Profile dishwasher fixed. It is July 24th as I write this review. I have had two different technicians come out. It still does not work. After the 2nd technician came out I ran my dishwasher and at 2AM realized something was wrong because it was still running. I came into the kitchen to find my entire kitchen floor flooded in boiling hot water, ruining my cabinet baseboards. I have since had two service calls canceled at the end of the time designated and today I have no technician showing up. Customer no-service is saying technician tried to call me; I have recd no call and have no message left. I have taken multiple days off work to sit at home waiting, and waiting. And this is after two already came out. ABSOLUTELY AWFUL SERVICE.

Negative 5 stars. I purchased a GE over the range microwave oven, JVM2052SN1SS, just over a year ago and had a service call to address a lack of exhaust about a month after my purchase. In summary, the tech said it would not function as a dedicated exhaust hood and nothing can be done. 14 months later, the key pad began malfunctioning. Also, the moisture sensor that the operation manual stated will automatically start the exhaust fan, never worked and every time we cook, moisture would build up between the glass on the microwave door.I called GE Consumer Relation today and they will not address this issue free of charge. I will not purchase another GE product because GE dont stand behind their products.

We bought our home 4 years ago. After 2 years and 8 months the bottom of the door cracked and a piece fell off, then the door wouldnt close. We were past the warranty so we bought a new one since it would be cheaper to replace it than repair it. We didnt complain because we thought it was put in incorrectly by the builder. The new one was installed correctly this time. After 1 year and 8 months the door is doing the same thing. I contacted GE and they said there is no manufacture defects. Because we didnt purchase the extra warranty it would cost us $90 to have someone come out and look at it. We only paid $179 for the microwave. It is a huge problem for us! We will not buy another GE product. Mostly because the customer service isnt willing to help at all. They just transfer you to different departments who all tell you the same thing. Very disappointed in GE.

I bought a GE Profile dishwasher 3 years ago. After two weeks it was broken. I called Mabe Appliances and they sent out a tech. He told me it was broken. When I called Mabe back the service people told me to read the manual...yes really. Finally after a lot arguing they replaced it. About a day after the 1 year warranty expired all but one of the cycles stopped working. I have to take it apart every 3 months to clean out the water output as its clogged and the water doesnt have any pressure and therefore does not clean the dishes. I got up this morning and the dishwasher was still running but there were no lights on the front of the unit. I turned it on around 8pm so it was running for 11 hours. When I opened the door it was apparent it had been stuck in the wash cycle the whole time. It is now completely dead. Nothing works. No lights. WHAT a piece of JUNK. How can GE put their name this crap? STAY AWAY FROM GE APPLIANCES. Spend a little more and get a Samsung or LG or Bosch.

Three nights ago, I loaded my GE Profile Dishwasher, model # PDW9880L00SS and began the wash cycle. The wash cycle completed and I went off to bed leaving it on the dry cycle. The next morning I smelled a burning smell but did not know where it was coming from in my home. A few hours later, my husband began searching all of the appliances in our home to see what the burning smell was. When he opened the dishwasher smoke came out of it and everything in it was completely burned. Apparently the drying mechanism never turned off after the wash cycle or it turned itself back on only on the dry cycle. I dont know. But I know one thing for sure, we are lucky that my husband was home because I left and if he wasnt there, Im positive that the dishwasher would have caught on fire causing severe damage to our home. I will never purchase a GE appliance again. Note, I also have problems with my GE refrigerator and my GE Profile microwave and our dryer. Weve had to replace the dryer and the microwave and weve repaired the refrigerator. I have a repair person coming out to see if the dishwasher is repairable, but I dont think it will be. This is terrible.