We have an overhead microwave that fits nicely into the spot. The power level seems to have dropped off, but this is after more than 8 years with lots of daily usage.

Lousy and wont clean dishes. $1,000 down the drain.

I bought this dishwasher GLDT690TBB-00 on 05/12. Its not even 2 yrs old. I had some minor complaints about how hard it was to fit bowls, how the utensil rack wasnt easily accessible, how long the cycles took, how it had to be vented right after a cycle to keep clean dishes from smelling musty... But I was willing to put up with that. I spent about $700 new. The dishes did come out clean, if I stacked them properly. I only used it when full, about 2x/week, as I am an aging widow & live alone. It stopped functioning a few days ago. Control panel lit up, a little water came in, but no action with spray, etc. Called a local repair company today. They say the control panel is shorted out, and that in turn burned out the motor. The repair cost would have been $524.61. REALLY? Not doing that! Very disgusted. Ill never buy GE again. Last KitchenAid lasted 12 yrs, but as all the repair guys say: They dont make em like they used to! Too many bells & whistles. All I require is clean dishes, and for the appliance to do its job.

I pushed the oven cleaning button. After about 2 hrs I noticed smoke coming from the stove and the island where it is installed. The door would not open and the oven just got hotter and hotter and smoke was filling my house. I called 911 and they sent the fire department. After disarming the breaker, they removed the stove. I purchased the stove in 1996 but only used the auto oven cleaner a few times. The model # is jsp40 and serial # TR244121R. If I had not been home my house would have burned. GE you should do something about this situation. I have no receipt or order #. I purchased it too long ago.

I bought a GE over the range microwave, model #JVM1540DNBB and serial #TS903298B, on January 28, 2010. The keypad shorted out about the middle of July 2012. The microwave just comes on all by itself when nobody is around.

After a year and a half the dishwasher stopped draining. A $231 service call removed the three corn kernels and one watermelon seed that caused. See it all the time says the happy repairman. Another good example of why not to trust GE. Mrs. Gs sales and service complicit in the deceit.

Periodically my GE Profile Dishwasher will not clean well. On every occasion it is due to clogging of spray ports on the upper and/or lower spray arms. Removing the blockages is nigh-on impossible as it is often not possible to extract the blockage from the outside and its not at all possible to flush the blockage back down the arm to extract it at the centre. All that is required is a bit of forethought and the creation of some access to the arm. I was frankly surprised to not be able to find a replacement arm as the suggested solution to this problem, the additional part revenue being part of GEs the business model. There are a number of other design issues with the assembly at the bottom that make me think it was done by an intern and nobody checked her work at the end of summer break before it went into production.

First, as a new homeowner blessed with select builder-provided appliances, I never imagined I would be authoring this letter 4 months after closing on the new home. Your friggin’ microwave oven light mechanism truly sucks! I lost the two bulbs a week or so ago and purchased two more at the cost of approximately $10, even though a one-year warranty was stated. That was okay, as I was more interested in fixing the problem versus starting some long-range purchase interest. So, and this is the most aggravating aspect, I have the correct pins and life is ** good, and as I attempt to insert the first, the ** pin breaks off. Okay, so I reflect on the horrific engineering of the mechanism, and I softly” align the second of the two bulbs, and the ** pin breaks off again. ** is my predominant theme tonight. As well, believe me, I am going to inform Taylor-Morrison that their respective selection of your friggin’ lousy pieces of crap is corrupt and misguided. You suck, G.E.! I’m moving forward.

Clean neat appearance over stove. Fast consistent heating. Easy heating options. Turntable on or off. Also, love the stove top light. Cost a bit more than I thought it would, but not much more than others.

I bought GE dishwasher model #GDF570SGJOCC from a local appliance dealer in April, 2017. The machine cost about $600, and $150 to install. Today I learned the circuit board is caput and it will cost $600 to replace it. I will never again buy a GE product-- 2 years of service and it needs to be replaced.

We purchased a manufactured home that had brand new, GE appliances in it. We have been in the home for almost two years, but the dishwasher has never worked well, at ALL, even when it was brand new. We called GE and they sent a local appliance repairman to our house. He said that there was nothing wrong with the dishwasher. They are just junk. Amen! I have tried running the water in the sink until it is hot before the dishwasher fills up, we have tried using a citrus additive that is supposed to help it clean better, we have tried several different kinds of soap, NOTHING works. It never gets the dishes clean, there is always residue and food left at the bottom of the dishwasher, and it runs for hours on end. I cant wait until I can get rid of this pile of junk and purchase a Whirlpool or anything else. I will never purchase GE appliances, EVER!!!!

I recently purchased an Adora dishwasher from Home Depot. The price was enough to suggest that it should be a good dishwasher, but its the worst dishwasher Ive ever owned. It does not clean dishes and it takes two hours to do it.

Today I heated some spaghetti sauce in my microwave and it splashed, so I wiped it out. My microwave is built in and was pretty new and in the house when we bought it 4 years ago. It is in the base counter so I have to reach down to clean it. l havent had a problem with it but when I wiped the inside top I felt bumps and when I looked at the cloth to see what was on it, there was paint on it. That has never happened before so I of course looked and there is a fair amount of peeling paint in one spot. I have had microwave ovens for many years. Never had this problem with any other brand. What is that?? Can it be fixed? Is it dangerous???

We purchased our GE dishwasher in September 2014. In December 2014 the dishwasher started to make a loud grinding noise. I contacted GE and a repair man was sent promptly to do the repair. Upon arrival and looking at the dishwasher he advised me that it was the motor. He then stated that he would order the parts and also stated that he did not have the correct tool to remove the motor and has not had one since they have changed the manufacturing process. At this time I am still waiting for the parts and I have contacted GE numerous times to find that the parts were either on back order or had been shipped out. I am still waiting for the parts and the repairs to be done. The estimated date of the parts to arrive is January 29th. At that time I will have been without a dishwasher for a month that I have just purchased.

The looks are ok. It works great, not too noisy. Wouldn’t mind replacing it with a different color and apparel. It fit great over the oven and is a space saver. Cleans up well, not too hard to clean. Not sure of the exact price, but I remember it was very cost efficient

I purchased the dishwasher in August. In September, two months later, it would not drain. GE sent a service tech out under warranty who found food particles stuck in the drain pump, removed them, put the dishwasher back together and went on his way. Since then, we have been basically rinsing the dishes clean before even putting them into the dishwasher as, obviously, this dishwasher cant handle much. I have also been keeping the drain filter screen spotless. Two months later, the drain is clogged again. GE sent a second tech out who said that the first tech should have repaired the dishwasher.The problem is that GE knows that the drain pump screen and the filter screens are inadequate and let food to pass through and block the pump. GE has redesigned the pump and the screens and filters and even added a filter to the design and we will get all these new parts installed for free and the dishwasher will then work as it should. Tech ordered the parts on 12/21. The service call was scheduled for tomorrow, 12/27. I got a call today from GE saying the parts had not been delivered. I know this because they are being shipped to my house and they have not arrived. GE called to reschedule the service call to January 6th, 2020--another week and a half away!!!! Clearly, this dishwasher is not working as it should and GE has a problem on their hands. I am now weighing my options as I sit on hold on GEs Customer Service line as I wait for someone to complain to. But as the dishwasher is still only a few months old, I am tempted to load it up and bring it back to the big box retailer from whom I purchased it and demand a refund. This is ridiculous!!!!

Microwave fan just stopped working. Dishwasher wont dry dishes. Also, cloudy water drooling down door when you open it. If you set it on heavy or normal, it runs forever. This is horrible for a year old product. They were acting up before then. Busy schedule kept us from reacting. Looks brand new, works like its 20 years old. Help.

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

Microwave lasted 6 months, very light duty, burnt metal smell. Purchased from Walmart, they told us to contact GE. All GE could offer is a Good Will certificate which means, we have to go buy another GE microwave up to $155 in value. We pay taxes, shipping etc. Not really a customer-centric return policy for a lousy designed product made from cheap components in Asia. These microwaves are a piece of junk. This isnt the only complaint about this model of microwave. Others are experiencing the same problem all within the past 6 months. From March 2018 thru August. Stay away from these microwaves.

We purchased our GE Cafe stainless steel dishwasher in May of 2012. Periodically, it leaks around the bottom of the door. I have to put a plastic container on the floor to catch the water. This is bad enough and very disappointing, but the next and most important issue I have with it is the fact that it doesnt clean properly. I always, each and every load, rewash 3 to 4 items. The stainless handles also get very hot to the touch, which isnt very safe for a toddler. If I had the strength, Id pick it up and throw it out the back door. A dishwasher is designed to do one thing, wash dishes; its not a difficult concept. It is supposed to make life easier, not harder.

I have two of these in my kitchen, just about 3 years old. They have NEVER dried the dishes and I have ALWAYS had to thoroughly wash the dishes because otherwise they dont get clean. One has completely quit working now.

I bought GE Microwave JES1139BL03 in 2011 and the white paint inside has been peeling off. I think it is defective because I have had other brands and none of them have done this. This microwave was manufactured February 2011.

I bought a GE dishwasher model #GDF570SSJSS from Sears. It was delivered on Thursday, installed Friday (by myself and a daughter) and the first test run produced nasty, dirty dishes. It took 2 hours and 10 minutes for it to declare that the cycle was finished and the dishes were clean. Fortunately I did not opt for the drying cycle. Or else the nasty crud would have been baked on. I called GE service and they scheduled a Monday service call. Monday, a very nice man hooked the unit up to his computer and found nothing wrong. He then placed a plexiglass door on the unit so he could watch the cycle. He found that the connection to the upper arm was not attached. He snapped it into place and declared that it was fixed.While I watched through the plexiglass door I was appalled that the reason that the GE dishwashers are so quiet is that the washing spray is extremely gentle. The technician seemed very proud of how quiet the units are. I told him that I could get my dishes cleaner if I spread them on the lawn and used a water hose sprayer. He was not amused. I chatted with him and asked several questions and learned some interesting facts. The lower and upper spray arms and the top rain action do not all happen at once. First the lower arm sprays, the machine pauses, then the upper arm sprays, the machine pauses, then the top rain action happens. This cycles over and over until the machine thinks the dishes are clean. I asked why there wasnt a hurricane inside the unit scrubbing my dishes? He said that the motor is a DC motor, I asked how many volts, he said 12.After he left I filled the machine up with dishes I had saved over the weekend for the test. The machine ran for 2 hours + (I forgot to write down the start time). The end result was nasty, dirty dishes that I washed in the sink afterward. So the new dishwasher looks just like the old dishwasher but let me tell you, she is not happy at having the worthless piece of junk sitting nearby and doing nothing while she is sweating over a sink full of dishes. When Im not quite so angry in a few days I will have a conversation with Sears to try to resolve this.

I bought the GE profile dishwasher and refrigeratior 5 years ago. The dishwasher in the first year the mother board went out then had a problem with the motor and now has gone out again and had a repair come out and cant figure out why it doesnt work. the refrigerator has gone out 5 times, the most recent is 8/1/11 and always the same problem. When ever the humidity is high the frig freezes up and then it stops running. Im very disappointed in GE, Ill never again by another GE appliance.

GE DE68 00307A microwave was bought in June of 2011. Last weekend, August 25, I was heating water and the microwave started smoking and then failed. The entire apartment was filled with chemical smelling smoke. I have a parrot and had to get her out immediately as this type of smoke is highly toxic. I had to keep her out all night long.

It could clean better without pre-cleaning. Its necessary to pre-clean heavily dirty items. Works ok if dishes are just moderately dirty. Could also be quite a bit quieter. However it is about 15 years old and still running but sometimes motor freezes up if not run often.

Door would not latch, so entire locking mechanism was replaced. Still wont lock. Repairman said it looks like door is warped or bent and door may need to be replaced. We have used the dishwasher twice a week for a year and suddenly it wont lock. Have heard this is a common issue. Is this true? Is there a recall?

GE is a proven brand and its quality for reliability. When I was shopping for one I went with a known brand. Planning to upgrade my kitchen and will be shopping for a countertop microwave. The over-the-range microwave has stood up 15 years of use. Happy with purchase and performance. Will purchase GE brands in the future.

We have a 2017 GE profile built on microwave. The microwave started shooting fire inside the microwave a year ago. GE fixed it. Last week the microwave started shootings fire inside the microwave again. This time it was much worse. The GE technician told me it was not fixable. I called GE customer relations and was told too bad because it’s not under warranty anymore. They offered a minimal discount on a new similar model. The attitudes of the customer care representative and supervisor took me by surprise. They were curt and told me, Guess you should have gotten the extended warranty. When it comes time to replace my kitchen there will not be any GE products in it. GE does not stand behind their products. The tech told me there are issues with the profile microwave and he felt they would replace it. They did not replace it and were rude. I have been a loyal GE customer. Not anymore.

RCA RMW953-White 0.9 cu. feet Microwave, 900-watts, 10-power levels, end cooking signal, glass turntable, 6-one-touch cooking menus, speed and weight defrost, cook by weight. Bubbles obscure text. I wanted a white microwave with a door handle, .9 and fairly powerful. I was glad to have found this microwave. But I dont know if the hole was there before, or my teenagers or I inadvertently put a small hole in the plastic covering over the control panel outside the microwave (NOT meant to be removed, I asked support) but now its become a larger hole as air got underneath. I cannot read the button text. I tried to cover it with scotch tape and thats not working.I searched and found out this is a common problem with GE microwaves. The buttons are very close to the bottom and therefore, countertop, so if you have a utensil or plate or something that sits near the microwave, it might nick the plastic coating. I called GE support (in India) and they said since its under warranty, I can return it. However Id have to pay shipping costs. Fortunately, I bought this at Wal-Mart (I hate to support this store but it was the only place I could find this style) and they have an excellent return policy and there is no charge for shipping. It was easy to call and request a shipping label within the generous warranty period. You might save yourself the trouble of a return or be very careful to not put a small hole in the plastic coating. Again, this is not protective coating for shipping, this is a permanent coating to protect the buttons.

My GE dishwasher came with my new Miller & Smith house. Its 2 years old. The bottom tray is rusting in several spots and you cant open the door while in operation to add an extra dish. When you open the door the dishwasher should pause while you add the dish, but this one continues working as if the door was closed and water sprays everywhere. I understand the one year warranty (they must know their products do not last long). Their support line tells me my options are to get it repaired ($99.95 for a tech to come and diagnose, then additional charges for parts and labor to install the parts on the next visit). The bottom tray is ~$125. I found their customer service rude, unsympathetic, and bothered by my questions. I was also told to go their website and review the rebate offers on a new dishwasher. I wanted to understand that program better, but the customer service agent did seemed uninterested to help me.I was quite surprised in getting this poor quality product and poor service from GE. Im not going to bother with repairs, because the cost at least $300, so I will opt to put that money in a different brand. I was considering giving GE another chance and taking them up on their rebate offer, but after reading all these other reviews, I certainly will not. The time I spent writing this will very likely have no impact on making GE change, but maybe put a tiny dent in their reputation and they will get one less sale from me.

We had purchased the first listed model of dishwasher (Model PTD7505SSF8SS) and installed it on Aug 27/16. It worked for a total of 13 days and broke down on Sept 9/16. After a good deal of phone tag - a technician looked at it and said no less than 3 internal components had failed, the unit needed to be replaced. We were without the unit from Sept 9/16 until Dec 23/17 when the new replacement unit (Model PTD845SSJOSS) was installed. It worked for a total of 20 days and broke down on Jan 12/17. More phone tag... Tech looked at it and found a number of issues (motherboard, door switch, etc...), in addition - it had been leaking water under the dishwasher for the time it was in service. (All 20 days! What a record!)When a dishwasher leaks upstairs... It doesnt go well for the drywall ceiling downstairs. (The rep at GE was cold and calculated informing me that is what insurance is for!) Im not sure that is what someone who spent $1,699.00 for a GE product (in good faith of a reputable product) expects to be told by the individual who has the ability to make things right? At any rate, this is what you can expect from the trained professionals at GE. When they finally got around to looking at my file... They decided to simply replace the motherboard in the hopes it will fix the leak also.I would have liked a refund at this point (not likely) so I requested yet another replacement (given the issue of water leaking), they absolutely refused. As of this date Feb 2/17 we are still without a dishwasher. Goes without saying - no more GE products will enter our home and I will share, with everyone I can, the caring and kind words of support I experienced from the top level at GE.

Two years ago, I replaced my 25-year-old GE bottom-of-the-line dishwasher because it made a noise like a freight train. I was ecstatically happy to have a brand new top-of-the-line stainless steel GE Profile dishwasher that hardly made a sound while working. Well, that is the best part of the new machine because it also hardly cleans. We have tried different detergents, additives, etc. We have checked our water temp, pressure, etc. Not only does the machine not clean all the silverware/dishes, it doesnt dissolve and remove all of the liquid detergent, so I have to run the machine through another rinse cycle. We are so frustrated in my house that we have finally given up and now hand wash our dishes. I hate this dishwasher and would never buy another GE product again! I also had an issue with a GE bottom freezer fridge. But thats another story. By the way, the old 25-year-old machine? It always got my dishes clean.

I bought this JVM1540SN1SS microwave just two years ago. From past five months, certain keys stopped working. Then today, it gives me error service may be required - keyboard shorted. Microwave is unusable at this point and out of warranty. But my previous microwaves worked for decade without any issues. This one broke in about 1.5 years. These microwaves are of bad quality. I think GE should recall these microwaves and get it fixed free of cost for consumers.

I bought a Moffat washer and dryer, and the timer came out of place and burnt on the inside. The timer clips in and if push too hard it will fall out or break the clip. We have extended warranty on it and due the repairman came out twice. The warranty person said it cost more for the repairman than the dryer worth - theres no more warranty. I think the dryer should replace when the timer fell out of place. This dryer should be called back.

Updated on 06/28/2021: Nearly 8 months plus my mother waiting for dishwasher and now its the wrong one. Store where she bought it made a mistake. I didnt catch it till the dishwasher broke, She originally got the right machine but store marked it wrong on the invoice. Now on top of this the brand new dishwasher doesnt even work. It has a E4 code indicating a leak. Waiting over a week for serviceman. It always because of covid is the excuse for shabby service.Original review: I have never had such a problem in my life, first you have to phone then its either they put you on hold or transfer you to a voice mail. This is ok service until something serious happens then all of a sudden you dont get any call backs and stall tactics and simply dont listen. My mother bought expensive GE Profile dishwasher with 5 year bumper to bumper warranty that means nothing, I cant get through, tried to send form there no way to send it just a clear button??? Its supposed to be at least in contact within 48 hours to 72 hours. I have given them extra time due to Covid but I BEGINNING TO BELIEVE THAT IS JUST ANOTHER EXCUSE FOR THEIR TARDINESS. THE WARRANTY IS Excelsior guardian angel plan.

It has never cleaned good. It does not load easily. We have tried numerous dishwashing liquids etc. But none clean well even though we rinse the dishes first. This is their top model. Very disappointed.

Bought the new dishwasher in Dec. 2013. In November 2014 a month shy of warranty expire, the detergent dispenser did not release or partially released the detergent. GE sent out A&E Factory service to fix. First visit initiated the parts order which was a new computer board and a Cascade Series detergent dispenser. A month later the second visit to install parts, the A&E tech was at our home for 3 hours and it took that long to remove and replace detergent dispenser. The tech did not replace computer board stating it was not needed? A week later the detergent dispenser still did not release the detergent! Called back to set up another appointment which was at the earliest Jan 19th 2015. Meanwhile last Friday Jan. 9th 2015 the dishwasher started to smoke heavily causing smoke detector to go off at 9 p.m. at night. Thank goodness!! We were home so that I could disconnect the power. Third visit was 1/12/15 and was informed by Lead A&E tech that the board should have been replaced and that the tech that was sent out was a trainee and inexperienced to work on my dishwasher. He should of never worked on my dishwasher(!!) according to the Lead A&E tech. The Lead A&E tech also stated that my model has had a problem with the computer boards which is essentially the brain of the dishwasher. I am currently taking my fight back to GE since A&E Factory is a subcontractor to GE and is not authorized to replace appliances. I told GE that I want a new dishwasher that is not using the problem computer boards even if it is an upgrade. It is not our fault that they have work with A&E who send out inexperienced techs to work on complicated GE appliances. We want a dishwasher that we both feel safe to run while we are not home. Is that too much to ask for?

After a short four year history of not cleaning our dishes well, our four-year old GE Profile Quiet Power 6 QP6, model PDW9280N00SS, s/n-VM819634B, overheated and did not shut off and melted everything plastic inside. The house now has a horrible smell of burnt plastic. Ill start the process tomorrow of contacting the insurance company and looking to get this odor out of our home and a different brand of dishwasher into our home.

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

The microwave is large enough for a whole chicken and operates at both a high speed and good efficiency. Most items can be timed within minutes of properly prepared meals.

Bought the unit about 2 years ago. The interior paint started coming off after about 1 year and several months. At 2 years, the unit stopped working and is reporting a shorted keyboard. I have had other over-the-counter microwaves that lasted over 12 years and were replaced just due to old age and style. I have read about others with the exact same issues. Ill stay away from GE products big time after this display of poor reliability.

I replaced a GE JEM25 microwave when the Magnetron gave up with a PEM31DWW unit. Within 14 months the paint on the ceiling of the oven started flaking off. Contacted GE and they offered to sell me another oven for $166. After reading all the negative reviews on this site, I dont think I will ever buy another GE product.

We upgraded our appliance package when we bought our village builder home 8 years ago. All GE Monogram appliances have rusted and now need replaced. New liners needed in oven which was so rusted we couldnt get the screws out to replace the originals. Was told by GE customer service rust to be expected when cooking. It creates steam and food particles can cause scratching!!! Maybe it should be steam proof especially a microwave. Even the door on this is rusted! Why the shelf ends in a freezer are rusted not sure on that one! Will NEVER buy this brand again and shame on them my upgraded appliances dont even make it to 10 yrs. A disgrace. My mother just replaced her 20 yr old oven. What is wrong that nowadays things dont last 5 minutes? Shame on you GE not recognizing a definite flaw in your products.

I owned this microwave for the last 5 years. Easy to installed, good appearance, stainless steel, easy to operate but fancy enough to prepare different meals to include the younger ones. Lighting very good and vent excellent.

We purchased several new GE appliances in August of 2016 as part of a kitchen renovation. We bought the GE Cafe series dishwasher CDT865SSJOSS. Within two weeks of use, the display stopped working. It took 3 weeks to get a technician out to fix display. Approximately 6 months later, we noticed the dishes were not as clean. Two months later the water stopped draining. Called a technician in, he diagnosed a broken pump. Parts would take 3 weeks and he would be out a week later. We are now over a month without a working dishwasher. He “fixes” the pump but says it isn’t draining great because your hose from your disposal is plugged (this hose drains to the same place as the dishwasher). Hire a guy to unplug the drain ($140). It isn’t plugged. The whole house is clear. Have to Shopvac out the stagnant water from the dishwasher that smells like a corpse. Call our plumber to check the lines ($500). He discovers that the technician pushed in the washer and busted a line. We now have water damage through our floor and into a bedroom below. He confirms that the plumbing is all clear and also finds that the technician never reattached the pan to the bottom so water was hitting the sensor and activating the shut off for a leak. Plumber fixes plumbing wrecked by technician, dries the sensor and attaches the pan. He advises that we run several cycles to flush out the stagnant water. If water still is not draining after several cycles, he advised that the new pump was faulty. Plumber leaves. We get 10 minutes into a cycle and the dishwasher stops for a leak again. I called GE hoping they would stand behind their product that we have now had for 2 years and have used less than a year. GE does not stand behind their products. The only thing they will do is send out a technician that you have to pay $100 for and they can’t guarantee that you won’t get the same technician who has come out 3 times and cost us more money due to his negligence. In May, we will be putting their terrible product out on our curb for city wide garbage collection. You no longer get what you pay for with GE. Do not buy their products!

GE Microwave Model JES1139BLO3, Serial # VS904116B - The above model was purchased at Lowe’s in Ventura, CA about a year and a half ago. In that time, the white coating on the inside of the microwave has been deteriorating, beginning with the area under the turntable and extending out to the bottom and sides of the unit. I am concerned that our food will be contaminated by the particles that are coming off or that there will be a fire caused by the microwaves hitting on the uncoated metal. I do not plan to ever purchase another GE microwave.

Bought new Spec house with all GE appliances (was charged extra). Dishwasher Model GDF510PSD1SS wasnt drying dishes, run time 3 to 4 1/2 hours. Opened door to stop it. Have to hand wash first, then place in dw. Service man said dishwasher working properly. All was wet, rinse aid constantly leaking. Tech replaced. Inside of dw gray color had milky white film on it, dishes, rubber gaskets around door. Tech poured citric acid sol. on filter. Next run, white film again. New Cuisinart pots, pans, lids, silverware & all, scratched and nicked in first wash. Found a piece heavy glass and screw in DW. Tech said someone forgot to put screw in panel and he didnt know where glass came from. Seven + tech visits, GE Consumer Relations refused my calls. Every 2 to 3 weeks, have to remove, clean filter, bottom screen, hand dry. One cycle works. White film was hard water buildup. A used dishwasher!! Bought water softener. Problems with R.O System & Refrigerator. NO More GE!

We have had this GE dishwasher model GLD6760N00SS for about 9 years and it was fine, until a few nights ago!! We ran the dishwasher, unloaded it, closed the door and went out. When we returned about four hours later we were met in our apartment lobby by the building manager who informed us that we had a fire in our apartment. It started in the dishwasher, which was off, and destroyed the unit. Repairs will be costly due to fire restoration required as well as the need to now replace more than just a dishwasher. Soot covered the whole apartment, and left a need to get a new kitchen floor and repair/replace some cabinets. Be careful of this model from GE.

Super sad about the performance of this dishwasher. This is the second leak in a year. The first time my husband fixed with new GE pump because we wanted the dishwasher up and running and the scheduled repair time was out more than a week. We were also told there would be no reimbursement to the damage to the brand new floor that was damaged. This time I REFUSE to have him fix the dishwasher even though once again the repair time is out more than a week. The cost of this dishwasher should warrant a functioning product.

The microwave overall is good. It looks very good. I think that the price was good as well. I would certainly recommend this item as an item to buy. So far it appears to be well built, I have not had any problems with it.

Purchased my GE microwave roughly 2 years ago. Recently it started running with the door OPENED. I cannot get it to stop even when pressing the cancel button. This happened whether or not there was time remaining on the clock. I was very concerned about the microwave rays being harmful to my children. We unplugged it overnight, it worked for literally 2 minutes and then it would not even turn on. Model number HVM1540SN2SS. Pretty upset that I have to buy a new microwave already!! I was going to replace it with another GE microwave to match my other appliances, but after reading so many posts of other GE microwaves running with the door open I think I will slowly work GE appliances out of my kitchen.

Coincidence or not but after posting my review, threatening to get the attorney general involved, putting pressure on local GE distributor through the builder, we have received a replacement dishwasher. This is not a happy ending yet unfortunately.The installer who delivered the unit was filling in for someone who took a day off and was not familiar with complete process. He came to our house at 9am and left at 2:20pm after spending hours reading instructions and maps on how to put things together.The new unit works okay for now but does have a slow drip from the upper left corner. This has been an extremely frustrating battle and we are now more worried about what happens after the warranty runs out if problems continue.One option is to buy extended warranty and give GE more business, second is just to replace it with more reliable brand. I am giving GE two more stars for replacing the problem unit but we are still hurt from the entire process, especially after buying top of the line product. We truly feel that customer service people should have been more sensitive and understanding of the consumer instead of firing back. Their bad attitude really did not help and added more frustration.

Purchased new from Lowes. Dishwasher leaked starting less than a month after purchase. I have had it serviced 3 times since purchase and have another appointment scheduled. (It takes 2-4 weeks to get a tech out to your house). Currently they say he is going to come by on Tues and check to see which part to order next and then they will come back and work on the dishwasher when the part comes in. (Of course the dishwasher is leaking as I wait). They give a 8-5 service window so I will just have to sit here and wait on him to come by and decide what to order. This is pathetic. When you buy a new GE appliance you need to be aware that they literally do not have any program for replacing flawed appliances.

This dishwasher was in the home we bought and its just not a good one at all. We dont like the settings.. We dont like the size. Weve seen better settings on other dishwashers when shopping around and pricing for a better one.

Been using this microwave more than 3 years, more than happy with it. It has out performed all of my prior microwaves some costing much more. Will definitely re-purchase this brand again in the future.

My dishes always come out clean & the glassware always sparkles. I can use normal, heavy or light cycles. I can use heat to dry the dishes or turn that feature off & let them dry themselves. I think its just a normal size. Its white & matches my other appliances. This is the first GE Brand that Ive ever had. Ive had KitchenAid & Frigidaire models in the past and this one is as good as the others were.

I purchased a GE Profile dishwasher in June 2015. It was delivered dented.19 July it was replaced. The dishwasher worked for 3 months. Then it stopped working and the display panel had a LEAK DETECTED, DO NOT USE, notification. We contacted GE who could not find a GE repair technician to come and repair it in the entire BAY AREA. The dishwasher was bought at SEARS who refuses to take any responsibility.

Microwave GE Monogram - For the second time in as many years, the glass door on my microwave just blew out and spewed glasses all over my kitchen. Luckily, no one was hurt except we are still getting glass in our feet a week later. My husband and I both contacted GE by email with no response whatsoever. Clearly, having read about this happening to many others, this product should have been recalled. It is their top of the line. The microwave wasnt even in use. GE must not need any customers and they have sure lost this one.

My purpose is to inform the public that GE will not stand by their stainless steel dishwasher appliance on rust. In less than 10 months the outside of our door has rust spots. I used only soap and water and cloth to clean as door does not get dirty and our water in Hawaii is safe and drinkable. Does not require water filters. GE CS said, We will only cover for 30 days after purchase, and cleaning products used and most likely our water type caused this issue.

GE dishwasher caught fire - not part of recall. I arrived home for lunch to find smoke alarm going off and kitchen hot and hazy. Determined it was dishwasher and opened to thick black smoke pouring out. Heat so extreme cups/dishes and racks and spinning thing on bottom had melted and adhered to elements, each other and bottom. Parts of the dishwasher itself are warped (steel!). Granite countertops too hot to touch and wood cabinetry surrounding it darkened. Dont know the extent of that damage yet. Thank GOD I came home for lunch- I normally do not. I truly believe our house would have been on fire.

My less than a year old GE microwave stopped working last week. My AT&T phone service died so I had to make repair arrangements online. Guy was here this morning. My microwave’s main board is fried. It does not conform to Repair Guy’s published schematics. Repair Tech could not upload new data to it. Repair guy did order three new parts including a main board. GE told Repair Guy that mainboard delivery ETA UNKNOWN. After three hours here repair tech left and told me to call GE customer care. Believe it or not, two hours on telephone with GE. First you need to talk to a customer service rep that cannot help you. They then determine you need a Customer Advocate. Then they need to input data on your file for the Customer Advocate.Then they need to transfer you to that department. Then you have to get a case number assigned. Then you give someone all the serial numbers and model numbers again. Then the Customer Advocate (CA) takes the call. The CA does not speak English as you and I speak English. After the CA puts me on hold to verify the purchase, then the appointment, then the tech and then the order they actually speak to me. In my case, the mainboard part is not available on CA’s computer. The CA has to electronically contact the parts department to find out if the part is in this universe. If the part can be delivered to my Repair Guy in Jackson, GA within 14 BUSINESS days from the date of the inquiry I have to take the part and wait for repair.In the event the part cannot be delivered in 14 days CA will start a process to get me a new microwave. The parts department has up to 48 hours to respond to the CA. When asked what happens if no response occurs in 48 hours, I was told, That never happens. It is the Christmas Holiday and I anticipated guests. My husband is disabled and his meals are pre-made frozen so I will have to decompose them and heat them on the cooktop. GE could care less about those issues. So after waiting five days for repair I have no working microwave. Someone told me not to replace my GE with a GE, but I did not listen. It is December, holidays, no microwave is an aggravation that I thought paying for a GE product would alleviate. So, on January 2nd I might get an answer. Part possible or new appliance COULD be ordered and delivered by someone sometime.

I owned a previous GE dishwasher 4 years ago and would give it excellent ratings. I bought a newer top of the line version when I purchased a new home. It simply fails to clean dishes. Wet food that any dishwasher would remove, remained on the dishes. The drying cycle never dried the dishes. We have to hand wash the dishes now and have stopped using the dishwasher after 3 days of ownership because of health hazard. I called Lowes about this within days of the install. Lowes sent out the installer who claimed the machine was installed properly. Then Lowes scheduled a GE repairman to come to the home. We waited all day for him to arrive for a morning appointment. He never came. Lowes stepped up and is replacing the dishwasher with a non-GE product. I would not touch a GE product again given the lack of service and commitment to their product. I feel confident with Lowes, but not with GE - their ethics from engineering, manufacturing and servicing are very suspect with us.

I purchased all GE Profile & Café appliances when we remodeled our kitchen in 2012. The DW has never cleaned well. I have contacted GE through email several times and now I have to handwash all of the silverware and re-wash most of the dishes. At times, glasses and silverware come out worse than when they went in. We have checked the water temp, pipe size. We use recommended detergent and finish rinse. We had a service call from a reputable appliance repair person, we purchased the recommended citric acid and performed the recommended protocol. This thing stinks! GE recommended another service call. I had a 20+ year old KitchenAid prior to this and it worked like a champ! Never an issue. I am ready to toss it out and buy something else (but it wont match!). Any suggestions?!!

I had a new GE profile microwave which broke off couple of times and finally after 4 years of using it had to replace it. Since it was a built in so had not many options for replacement and went for GE again. This time the new microwave had a faulty door switch. It wasnt opening up every time. Scheduled an appointment and no one showed up - waiting for the whole day. I called the customer service 3 times and learnt that they had ordered some parts and were waiting for that. No one called and conveyed me this. I learnt myself after waiting from 8 am to 5 pm and upon calling them. They rescheduled me for a week later so that the parts can arrive. The day before the appointment I called again and now they dont have me in the scheduled appointment and got another appointment a week later. IT IS SUCH A BAD COMMUNICATION BY GE. I will NEVER recommend GE to anyone.

Negative 5 stars. I purchased a GE over the range microwave oven, JVM2052SN1SS, just over a year ago and had a service call to address a lack of exhaust about a month after my purchase. In summary, the tech said it would not function as a dedicated exhaust hood and nothing can be done. 14 months later, the key pad began malfunctioning. Also, the moisture sensor that the operation manual stated will automatically start the exhaust fan, never worked and every time we cook, moisture would build up between the glass on the microwave door.I called GE Consumer Relation today and they will not address this issue free of charge. I will not purchase another GE product because GE dont stand behind their products.

As a landlord I have about 20 GE microwaves. I have had 8 handles break off in the last few years including the one in my house with me pulling the door open. Standing straight in front of it, just pulling regularly. Replacement plastic handles - just two pieces of injection molded plastic - selling from other companies for as little as $10 are $130.00. $130.00! There is a clear design defect here and the companys solution to it is to charge $130 for the plastic replacement part. Someone should go to jail. Literally. Please include me in the class action lawsuit.

Less than three years ago, I purchased a microwave oven wall unit to replace an existing unit. Due to the size of the built-in cabinet, I was limited in choices. The cost of the unit was $2400. A few months ago, the interior wall of the unit began rusting and the enamel is peeling. I contacted the customer service dept via e-mail on their site. I was asked to send pictures and then informed that I should stop using the unit immediately due to the danger of arcing. I was also told that because I did not purchase the extended warranty, the best that GE could offer me was a new unit for $800. I asked for names of warranty companies and was given one name and number but told there were others that also offered the same service. I called this company and they clearly told me that the peeling and chipping was a manufacturer’s defect and would not have been covered by an extended warranty had I purchased one from any company. Then I contacted the GE repair service center and spoke with them. The man who answered explained that this is a cosmetic problem and that there was no danger of the microwave arcing unless there was less food in the microwave than the size of the area that was chipping. I am very disappointed in the response of GE, the pressure placed on me to make a decision in 7 days or the offer would be withdrawn, and the fact that the service department and the consumer service (complaint) department gave me entirely different responses to the same information and problem. I will probably have my cabinet rebuilt to avoid having to replace this unit with another GE appliance. Who would pay $$1600 for the use of a microwave/oven unit for less than three years? Unfortunately, GE seems to be the only company that makes a unit that fits the existing cabinet in my kitchen. Disappointing to say the least.

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

A year after I got my GE dishwasher at Home Depot, it warped, protruded into room out of counter. GE tech fastened it into cabinet, agreed warped, said call co. Cust. Serv. Rude, said should have called while in warranty. Offered tiny discount to buy another for $400. Its worse each day.

I have a newer (one-year-old) but base model GE microwave. I wasnt interested in lots of features, like convection cooking and such. I only use it to reheat coffee, occasionally heat a frozen meal, etc. It functions as designed, and Im very happy with it.

My GE microwave oven turns on by itself. The GE microwave oven model number: JVM1540DN1WW. The serial number is: RS903539B. My GE microwave oven turns on by itself usually as if the one minute express button was pressed in. This has been occurring for about 2 years and has been doing this normally when the air conditioner is not turned on. It appears this is a humidity issue. All summer it has been working fine. As the weather has started to be lower and we turned off the air conditioner, the problem has come back. When the temperature rises and we put the AC on again the unit will work fine. We live in Florida and it can be humid outside but with the AC turned on the humidity is lower and the microwave will work fine.

Needed to replace handle. Silver covering started to peel and actually got a splinter. Cheap plastic underneath covering. Called GE and while they did send out a replacement, I had to pay to have it installed. Instructions on internet were not helpful! Bill to replace was $142. Ouch. GE rep said they did not have prior complaints. I later Googled it and saw 1000 complaints!!!

I have had a few cheap microwaves but at this point in my life I wanted to buy a good quality microwave that would last. Well I bought a 200 dollar GE microwave in February. 3 months later it went out on me. I did hard and soft reset numerous times with no success. They offered me a discounted check to replace it and it would take 4-6s weeks to receive. Instead we returned to place of purchase and they gave us a floor model to replace it. All was well for 2 months when lo and behold this one started doing the same thing. No amount of resetting would make it run. It went out cooking corn on the cob. Why is this so hard to keep running? Their response this time was a goodwill rebate certificate to purchase only a GE microwave. Why in heavens name would I want another one? It only lasts a couple of months and who is to say the 3rd replacement will not be the same.

No matter what it is whether it's a GE hot water heater, an iPhone, a car or a frozen TV dinner, you're going to find someone that had a bad experience. After a day of rain eight years after I put in my Home Depot GE hot water heater, the pilot was out. I don't know if it was wet in there or what but it took me 10 hours of repeated attempts and while I was searching online for answers and deals on replacing it, I kept trying. And tonight at 10:30 PM I didn't bugger about, I just held down the pilot for one minute, and then once the pilot remained lit on its own, as fast as I could I turned the thermostat to medium high and kaboom it lit up wonderfully. Maybe it dried out but I would not say that GE water heaters are a piece of Home Depot junk. As I said earlier I installed mine eight years ago and it has never had a problem and since tonight it restarted and I checked the tap and now have hot water. I suspect it will be fine but if I need a new one, eight years hasn't been a bad run. Just follow the instructions very carefully and repeat and repeat and repeat. Good luck.

I purchased this dishwasher 2 months ago and am VERY disappointed with its performance. For an appliance that claims energy efficiency it is a total failure. My last dishwasher was a Kenmore that I had for 15 years. It outperformed this thing in every aspect. Since purchasing this dishwasher my water bill has gone up and my energy consumption has gone up. Why? Because I cannot put plates close together in this energy hog or they will not get clean. I have to do twice as many washings as I used to for the same results. This piece of junk has NO WASH PRESSURE! All the dishes must be pre-washed in the sink to assure satisfactory results AND I must use the hot water boost or they will not get clean. Energy wasted doing a pre-clean and energy wasted with hot water boost - bad combination! This product is taking me backwards in savings and environmental damage.

I had a problem with my GE Profile Dishwasher that I had for several years and I had it on factory warranty. However, the last time they came to repair, they did not have parts available to fix anymore. So, they recommended new one. I worked with Consumer dept and made arrangements to replace with one they recommended at $500+. After several efforts to get it delivered, it was and we began using. It is not a Profile like my old one and it does not have the additional washing, rinsing and drying cycles as the Profile. It is a flat out bottom line washer. No, sani clean etc.. We have used the machine about 4 times and each time we have to rewash several of the dishes and especially the silverware. This is the most disgusting piece of equipment I have ever used. My home is loaded with GE products from years ago, mostly the Profile series and I have been delighted with the products and service. This machine is a disaster. I cannot believe that GE has this on the market or maybe this is a machine they use to satisfy customers who may threaten to use someone elses. It was not free, as I say it cost over $500. The stores and onlines advertise better machines on sale for less. I have GE stock which I will sell. They are going down on Quality. Consequences: Stuck with poor machine that does not do job that I paid good money for. Really, GE, get yourself together. Product Model:GDF510PSD1SS.

We bought all GE Profile appliances for our kitchen when we bought our home in 2013. Since then every appliance has had issues and have replaced parts on. The biggest disappointment was the dishwasher. It doesnt clean since day one. We bought extended warranty and had numerous service calls since we bought it through ABT appliances. Not to mention the dishwasher alone was $1000. We literally have to wash the dishes with hands because this dishwasher is only for show in our kitchen. I called GE consumer relation and they tried selling me another one with a discount for $950. What a joke. Will never recommend or buy GE products.

GE is a very reliable name brand with history to back it up. I’ve used their washing machines for years and only changed out once due to newer features. I had Thebes first washer for at least 10 years, maybe a little more. It only needed one part replaced, that was the capacitor, otherwise it was still usable. I am not an in depth handy person but I will read and do my research and found directions doable. Additionally, I found the service help desk very informative and that’s how I discovered it was the capacitor that had gone bad after washing clothes for so many years, and believe me, I did a lot of cycles with my kids and family. I feel I got more than my money's worth. Lastly, I’m still using their products to this day. I may not have the frequency because we are empty nesters but I still believe in their products,

I have microwaved many types of food in mine! Remember, it’s not just for reheating leftovers! I have cooked fish, and chicken successfully. Those turned out juicy and tender. I follow directions from a microwave cookbook. It’s easy and clean up is a snap.

Fact no. 1: On 02/25/07, I supplanted a burnt-out 12-year old Kenmore microwave oven. Regretfully, my replacement of choice is a GE JES1456WJ02 unit acquired at Home Depot in Cumberland. At that stage, my spouse was afflicted with an advanced case of Parkinsons disease, and eventually, I had her concerned caregiver reporting having found chips of paint spread on food extracted from the new oven. From that point onward, I established a close watch of the infamous appliance, after confirming that the chipping paint originated from the roof of the GE oven. But I withheld from filing a claim with GE at the time because my wifes health deterioration absorbed all my attention.Fact no. 2: But on 12/12/09, a couple of months after my beloved one passed away, I decided to take the oven to a Home Depot claim department where they immediately agreed to replace the defective unit for another one of similar characteristics. With a sigh of relief, thinking that I had taken care of the problem, my assumption was incorrect.Fact no. 3: Today, 10/28/11 in fact, I discovered chips of paint floating over a plate of soup extracted from the GE oven. I was aghast! I couldnt believe it! Still, further inspection determined that the lousy internal coat of paint is likewise peeling off from this monstrosity appliance manufactured by GE.

My old (Panasonic) microwave lasted over 15 years. This brand is really poor quality and they dont stand behind it. Electrical burning smell. Less than 9 months old. Called customer service, they refused to repair and will send a goodwill rebate cert saying I can buy a new one (any model) and I will be refunded. I ended up paying $100 more because all local stores did not have anything close to my model. They will not cover shipping, tax or any of the extra cost of the new microwave. Stay away from all GE products.

After having my Cafe Stovetop for about a year and a half, there was a electrical component malfunction. During this, smoke came out of the stovetop and it smelled of electrical burning. I sent a complaint to GE since several components were damaged. Knowing that the warranty was only for 1 year, there would be nothing they could do except sell me the parts.

Does not clean well nor dry well even on the more powerful cycles. I rinse off all the food and if anything is accidentally missed, it just gets baked on. Very disappointing. Also much of the upper rack item remain very wet at the end of the cycle. Drying issues: I use the most powerful drying cycle option but contents remain wet at the end of the cycle, especially plastics and top rack utensils. Not just damp, but large drops of water remain. Cleaning issues: Even when I use the heavy cycle, unless I remove all traces of food from the contents, the food remains and worse, now baked on. This model has a sanitized cycle so basically I use this dishwasher to sanitize only rather than clean, dry and sanitize. Completely unacceptable.

GE Profile dishwasher washes dishes, pots, and cutlery well. Nice capacity. Also has an antibacterial cycle which is handy when someone is sick. Doesnt have a grinder in the drain (which my KitchenAid had) so I rinse everything before I put it in the GE dishwasher.

Run, dont walk, toward any dishwasher other than a GE. Problems with the dishwasher within one year - black residue on my dishes that felt and smeared like grease. Calls to GE repair resulted in the worst customer service I have ever experienced. One call returned at 4:00 am. After two visits, a lecture about how to load a dishwasher, I gave up. The effort of making calls for visits, taking time off work, rude repair technicians and being told it was not grease, I now have a dishwasher a few years old that is falling apart. Screws are now coming loose and the buttons are sticking.

I have had it with GE! Only 18 months after install, my beautiful, stainless, three-rack, GE, top-dollar dishwasher will not turn on. Repair attempts have been futile. Tech said not to expect more than seven years service out of new appliances. Were tossing this junk and buying CHEAP replacements going forward since all we have to choose from is throw away products. OEMs like GE should realize they are shooting themselves in the foot with their planned obsolescence business plan.

Our Spacemaker microwave, which was installed over the stove August 2008, suddenly stopped heating food. My husband called GE, and their phone advisor advised us the microwave was under warranty. She said her computer screen showed our product registration, and she also saw we owned three other GE products. Fast forward, the GE repairman came and said the microwave repair cost would be around $400. The heating part wasnt under warranty nor was the labor. Mind you, the entire microwave (new) was under $400. We called the GE service center, and they refused to honor what their representative had told us. The most they offered was 50% off. I dont accept the premise that a new appliance should only last four years. I will replace my unusable microwave with a competitor’s brand and will pledge never to purchase a GE appliance again. I will also sell my GE stock, for I now understand why its going nowhere.

Ive owned my GE Profile dishwasher for 6 years. Two months ago the pump had to be replaced and this is quite an expensive item. Then the other day I went to open the dishwasher and the doors spring gave away, hence slamming to the floor and crushing my big toe. The repairman said it was not the spring that broke but the link that holds the spring in place. The spring is actually quite strong but the link is just a flimsy piece of plastic. We are both anxious to see if the replacement link he ordered has been made stronger and are replacing both just to be sure it doesnt happen again. Although my toe isnt broken, it is extremely bruised and painful so I am going to be ever cautious of opening the dishwasher again.

In 2008 I redid the entire kitchen and purchased all GE Profile stainless steel appliances thinking I was purchasing quality items. Well, it didnt take long before the dishwasher broke but it was fixed for free by GE under a recall. However, now the refrigerator has begun to leak under the right corner of the ice/water dispenser located on exterior of freezer door and the microwave touchpad has also failed as I need to press below the actual keys for it to work half the time. When I spoke with GE customer service they basically told me there was nothing they could do with the refrigerator, I would have to call a repairman and have it looked at or pay their $100 diagnosis fee.The microwave they told me had issues with that particular touchpad and had it broken within first 5 years they would have repaired it for free under their recall program. But since its 7 1/2 years old I would have to buy the touchpad which normally only lasts for 6 months to 1 year or buy a new GE microwave and they would offer a rebate. Im so unhappy with their customer service and poor reliability of their products that Ive passed on each offer as I dont want to contribute another penny to a company that in my opinion is unethical and has horrible reliability. 3 out of 4 of my fancy GE Profile stainless appliances have broken! Thats a 75% failure rate! No thanks, Ill buy elsewhere. No wonder they cant sell their appliance business and why the stock hasnt moved in years... Wake Up GE, do whats right for your customers!

Have a GE dishwasher put into operation June 2016 (new home). In Oct 2016 we noticed a leak and a serviceman came out and identified a loose soap dispenser - tightened it. Next time we used it, leaked as before. Same serviceman came again, this time replaced both the main seal & spinning water distribution wand assembly. Again, the unit leaked and on Dec 14th same serviceman replaced the soap dispenser. Before he got too far down the road, we called as the unit again leaked. He blamed it on excessive soap suds - which he removed manually. Following his departure, we again experienced a leak. Same serviceman returned on Dec 15th. After review, he advised us the DW would be replaced and we should get a call within 48 hrs to arrange. On Dec 17th (still no followup from GE) the DW leaked again - we video this time. On Dec 19th called customer relations and after much discussion it was apparent GE has NO CLUE what the heck they are doing. ONE MORE repair trip was scheduled - this time they would replace the inside and outside panel! We are fortunate to be retired otherwise this repair process would have cost us about $2000 so far! How idiotic is GE?? How much have they spent to avoid replacing this unit? Believe me this is the LAST GE appliance we buy from them. Dont know how they stay in business. We are awaiting the panel repair guy as of this writing. Will update once this service has been completed.

We purchased this dishwasher for our rental. The last dishwasher was over 30 years old and still working but the racks were coming apart so we opted for a new one from Home Depot. A year later our tenants called saying when they used the dishwasher it rained in the basement. Our maintenance man called and said the dishwasher melted a hole in the right side about 1.5 inches by a 1/4 inch. Midway to the heater element. He did a temp fix with silicone.I called GE Recall number and was told it was not on a recall list. I called customer service and was told they would waive the service call. I explained this was a FIRE HAZARD. They insisted all they could do is send their tech out for repair. Since I paid about 280 dollars for the dishwasher I decide a service call would probably run near that and told them NO! I am now sending all information to consumer affairs department with my STATE REPRESENTATIVE. I also am putting the fire hazard info out there on facebook and twitter. I am waiting for someone else to say they also had a fire hazard. This should be on a recall list!

It is very quiet and does an excellent job cleaning. I really like the new slate finish on the front panel. It has a stainless effect but does not show marks as well as SS and is very easy to clean. Great design, the top rack is adjustable and the use of internal space was well thought out. Very simple / uncluttered and I like the control mounted on the top door feature. Dont recall the model number. The washer was in the $650 price range which is sort of in the middle but has a SS tub. In my opinion the performance and features are no less than more expensive brands / models.

Our GE dishwasher cost $1,000. Reasons for not buying GE. 1. DOES NOT CLEAN DISHES. 2. Latch doesnt catch. 3. Rubber strip comes out. 4. GE customer service is useless. 5. Interior valve broke. Everyone w/ this model has same problems.

New home community - all GE appliances. Model PEB7226SF2SS microwave scorching and catching on fire; GE doesnt stand behind their products and homeowners cant use because products our dangerous (per tech).

I just remodeled my kitchen back in May of 2012. My wife and I started looking for the appliances and we decided to get the GE Cafe series set (dishwasher, cooktop, electric oven and microwave). Our microwave oven, model CVM1790SS1SS, developed a humming noise as soon as you closed the door. It does sound like the magnetron is on. To verify that, I filled a cup with cold water and I put it inside and closed the door without setting any cooking time. After three minutes, the water was too hot to touch. I called GE and told them that it was a fire hazard.They sent one of their technicians and he determined that it was not a fire hazard and if I wanted it fixed, I have to pay for it. How could he say its not? If I close the door, the oven is going to continue heating up until it burns itself and everything else around it. I am pissed at GE because this unit is barely one year old and expensive. This is a safety hazard and GE failed to acknowledge. Bottom line, Ill never buy GE again and will not recommend it to anyone.

We sent the rebate form in, and they denied our claim. It was for a dishwasher that was recalled. We had to buy another one and only received $100 for the rebate after having to spend $500 on a dishwasher, but the rebate was denied! Unbelievable. We have written GE and the FTC with no response.

My husband ran our 4-year old GE stainless steel dishwasher (PDW8980N00SS) at 9 pm, 2/4/13. At 11 pm, he emptied and put away the dishes. At midnight, we went to bed. At 4:50 am on 2/5/13, we were awakened by a burning smell and discovered the heating element of the dishwasher either turned back on or never turned off. We were unable to touch the granite counter, the front of the dishwasher, and both wooden cabinets on either side of the dishwasher were very warm. The spinning arms and other plastic parts were melted. The only way it could be turned off was to unplug it from the outlet in the cabinet. We were leaving for the airport at 7:30 am on 2/5/13, so needless to say, we would have lost our home if this occurred a couple of hours later. The Assurant tech said it was repairable and ordered a part, which would take at least a week. Assurant customer service had us call GE. When we stated we didnt want the faulty dishwasher repaired, but wanted a new dishwasher, the best the GE customer service rep could offer us was 38-40% off several new different Profile dishwashers. After reading page after page of bad reviews, most of which detail either one or multiple fires from different GE dishwashers, we dont even want another GE dishwasher in our home. We already needed the smart soap dispenser replaced, since it clogs periodically and doesnt wash dishes very well. We also have a countertop GE Profile microwave, and the turntable motor has gone out 3 times so far. Weve purchased the replacement motors ourselves since it isnt under Assurant insurance. Not sure what the resolution will be on the dishwasher, but wed be happy if GE would give us at least $500 toward a different brand dishwasher. I know well never ever buy another GE appliance after this. We wouldnt sleep at night or ever want to go out of the house without unplugging another GE dishwasher, so dont want one.

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

A small black piece of plastic, which snapped into the back of the microwave handle has bent/shrunk, and popped off. My microwave is just a little over one year old. I called the GE 1-800 phone number for parts, and GE does not offer a replacement part for this, without buying a whole new replacement handle, which costs over $160.00.