I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

Dishwasher is 3 months old and today is the first time it has worked! GE has sent repair techs 3 times and finally today the unit was temporarily repaired with electrical tape attached to the brand new door latch. The door latch is cheap plastic and has a manufacturer design defect of being too small to properly engage the unit when the door closes, thus not allowing the cycles to start just a series of beeps. No other manufacturer uses a cheap plastic door latch designed like this but GE! Piece of crap, dont buy it!

We did not choose our dishwasher. It was installed by the builder but its served us well for the last 3 years. Its good quality and cleans the dishes well. It is also relatively quiet while its washing.

I bought one of the microwave ovens with two metal shelves. I found that the shelf in the middle of the oven was in the way and I removed it years ago, but left the top shelf in the unit. The other day, while cooking in the microwave it started to spark at the point where the shelf sat on a small clip. The inside of the oven is ruined. Why would anyone put metal shelves inside a microwave? Im just lucky that I was nearby and able to stop the fire before it destroyed my kitchen.

GE dishwasher model # GDF610PGJ5BB was fine the first year and a half. It began making noise with electronic control panel beeping for no reason. The wash cycles were incredibly long. Finally after reaching the 26 month mark, the electronic panel gave out. Having no warranty, I called the repair division of the appliance store we had purchased it from. They were to charge me $90 just to come out and look at it. With the purchase price just under $500, I wasnt willing to take the chance of repair costing a third or half of the purchase price. Regretfully, we decided to give up on repair of this dishwasher. We decided to purchase a new dishwasher, but certainly not a GE.

The looks are ok. It works great, not too noisy. Wouldn’t mind replacing it with a different color and apparel. It fit great over the oven and is a space saver. Cleans up well, not too hard to clean. Not sure of the exact price, but I remember it was very cost efficient

I bought a new house and within 2 years my GE dishwasher and now my GE microwave jvm1750sp1ss need replaced. Ive got a cheap $100 microwave in the basement thats worked for years. GE quality has apparently went downhill. NEVER again. Cannot believe appliances that cant even last 2 years.

We purchased a new home with a GE Profile dishwasher installed. Since the day we had it, we have never been satisfied with the cleanliness of the dishes. They frequently come out covered in food and must be rewashed. We now routinely prewash everything in the sink and we always use the cookware setting to wash everything. Despite this, we still have to re-run loads because they are not clean.I am convinced that there is a design error with our dishwasher, because the top dish shelf obstructs the door of the soap compartment and prevents it from fully opening. After a load has run, you can still see leftover soap dried and crusted in the soap container. If the dishwasher cannot even wash the soap out of the soap compartment, no wonder our dishes are not clean.

I purchased the GE Cafe dishwasher in March 2010. Starting in January 2012, some of the keypad options stopped working. Then in April 2012, the keypad stopped working completely and I could no longer get it to turn on. I did call GE for repair. When the repair person was out to fix it, they said that this model has a design flaw. It was originally designed to sit 1 below the countertop so that the heat could release without shorting out the keypad. However, that would require a person to somehow raise their entire counter or fit the dishwasher below the floor somehow. GE was aware of the problem but decided to ignore the problem. That means that even though my keypad was replaced, the same problem will occur again and again no matter how many times the keypad is replaced. I paid over $1400 for this model, and the labor charges alone cost me $200 for the repair. I think it is absolutely despicable that such a large company has allowed a high-priced, defective product to go out into the market, knowing that a major malfunction will occur out of warranty in such a short period of time.

Sometimes there are dishwashing detergent (powder) left on the dishes. Nothing extra, very basic, it has regular or pot scrubber cycles, air dry or heat dry, a slot for dry rinse liquid, detergent slot, short wash cycle, upper rack, lower rack and flatware basket. Came with the house purchased 17+ years ago. White body with black upper control panel the entire width of the dishwasher. It is still in very good condition, but then I take care of everything, always rinse everything before placing them in the dishwasher. Never needed service yet.

I bought countertop microwave on 7-2-10 in Panorama City, CA. We were moving to Houston so left it in its original box, but the new apartment had a built-in. I left it in box until May 25, 2011 when we moved into an empty house. I took out my new microwave and used it from 5/25/11 until 12/4/11. I baked a 5- minute sweet potato. Later, I went to reheat coffee and no clock, no nothing. I tried the microwave at different plugs, no response. Then I tried the toaster in the microwaves plug. The toaster was fine so its not the plug. A repairman at his business location said its probably the computer chip. For $95, he would install a new one which would last a lot longer. So now we have disposable GE microwaves.

I bought this microwave about 2 years ago (2011). Yesterday the microwave turned on by itself, I tried to stop it by hitting the clear button that didnt work so I had to unplug it. When I plugged it back in it seemed ok so I reset the clock but within minutes it started again, this time the key pad read key pad short-circuit and then went blank. I am glad I was home when it happened. I am now wondering if I should repair it or replace it.

Have a GE dishwasher put into operation June 2016 (new home). In Oct 2016 we noticed a leak and a serviceman came out and identified a loose soap dispenser - tightened it. Next time we used it, leaked as before. Same serviceman came again, this time replaced both the main seal & spinning water distribution wand assembly. Again, the unit leaked and on Dec 14th same serviceman replaced the soap dispenser. Before he got too far down the road, we called as the unit again leaked. He blamed it on excessive soap suds - which he removed manually. Following his departure, we again experienced a leak. Same serviceman returned on Dec 15th. After review, he advised us the DW would be replaced and we should get a call within 48 hrs to arrange. On Dec 17th (still no followup from GE) the DW leaked again - we video this time. On Dec 19th called customer relations and after much discussion it was apparent GE has NO CLUE what the heck they are doing. ONE MORE repair trip was scheduled - this time they would replace the inside and outside panel! We are fortunate to be retired otherwise this repair process would have cost us about $2000 so far! How idiotic is GE?? How much have they spent to avoid replacing this unit? Believe me this is the LAST GE appliance we buy from them. Dont know how they stay in business. We are awaiting the panel repair guy as of this writing. Will update once this service has been completed.

My Profile dishwasher is not on the recall list, yet the heater element malfunctioned and did damage the entire inside racks and spin bar along with contents. GE told us to have their recommended repairman provide estimate. Repair guy estimated over $600 to fix. The unit was smoking hot which caused bubbling on the exterior and the dishes to show signs of burning. Well with estimate, GE is offering a discounted top of the line dishwasher for over $600. Pretty sure, I do not want another GE. Also, when I told the agent that I was afraid that if I had not been home, it may have initiated a fire, she said it would not have happened. Really?

The dishwasher is new and looks great. However the dishes are not getting clean. After washing with a 200+ minute wash cycle utensils are still dirty and food particles are left on plates and bowls. This is occurring even with a good rinse prior to placing them into the dishwasher. I clean out the food particles filter after every two loads, makes no difference. Also the water bottle jets are a nice idea but water bottles are too tall to fit even with the third rack removed. I am very displeased with my purchase. This was not an inexpensive model.

I have a three-year-old over the stove microwave Model JWM1540DN1WW. The message Keypad shorted - Service may be needed appeared on the screen and no buttons are responding to any commands. I called GE and was told it would cost $89 plus parts and labor to have a technician come and look at it. The same message appeared two months ago and a few hours later, the microwave started working by itself after being unplugged a few times. This time, it is not working. I will buy a different brand rather than pay money to fix this one. Anyone had the same problem?

We purchased a GE Adora Dishwasher less than 6 years ago from Home Depot. An unknown continual leak has caused substantial black mold, warped sub flooring and cracking of very expensive Saltillo tile of which weve had to remove. GE should be accountable and will be. Nearly, a $800 Dishwasher will cost us thousands in repairs and mold abatement. Unbelievable.

The new home that we purchased had the above named dishwasher (GDT655SSJSS). When I run the dishwasher there is a very high frequency whine throughout the cycle - the only time it stops is when it is changing cycles. I have contacted GE Customer service 3 times... The first time I was told to add a quart of water to the bottom of the dishwasher and that should fix the problem. Tried that - still high frequency whine. Second contact - no response. Third contact - today- called customer service after my negative appliance review was rejected by GE (buyer beware of all those positive reviews) and was told that this noise is normal. Totally Unacceptable - since the sound hurts my ears and causes a headache - I have to listen to 111 minutes of this noise (except when the washer pauses to change cycles). This is the very worst dishwasher I have ever owned and even though it is only 2 months old I will be replacing it - and it wont be a GE Dishwasher.

Very quiet and cleans a large volume of dishes. Love the silverware rack and the overall look of the dishwasher. Also great value for the money. Though we have only had for three years it has held up great.

I called and emailed GE about a microwave that is in my summer home. Its probably been used a total of 15 hours. They suggested a tech. I asked how much and they told me about $95. I said it died, why not replace? They told me they will give a good discount, yada, yada. As I point out, now I have to install it again so whos going to pay for that? They keep stalling and Im still waiting. I also have over $8,000 in GE appliances. I guess I will not buy another. They do not stand behind their products.

Its an older Hotpoint, and the layout is fairly roomy for a dishwasher of its size. The last apartment I was in had a comparably sized dishwasher that had too many shelving elements that got in the way of being able to just shove some dishes in there. Ive discovered with this dishwasher I need to stick to powdered detergent because the Hotpoint doesnt fully dissolve tablets. It does a fine job overall, though.

I purchased a GE Microwave Oven model # JES1139WL03 in late May of 2010. In early July, the paint started coming off the inside of the door when I wiped it with a damp dishcloth. I called Lowes, where I had purchased it, but was told that their warranty was only 30 days. I called GEs Consumer Support line and was told that for $65, I could ship the microwave to a repair center who would determine whether the machine could be repainted or would need to be replaced. I was told that either would require me to pay for it, since the machine still worked and peeling paint was not considered to be a warranty item. I guess if it catches fire, then they might warranty it.

I bought a whole line of GE Monogram appliances for our home in late 2005. These appliances are not even seven years old and I have had the side-by-side fridge repaired several times with no true fix to the problem. They charged me to repair the tank in the fridge that the water line leads out from and into the freezer door. Another repair man said that was never the problem and that the seal on the freezer door is broken from inside the door (a common problem) and freezes up the water line, so no filtered water comes out. They wanted to charge me $800 for a new door with no guarantee that it won’t happen again!My cook-top downdraft has shorted out three times because of a faulty design issue. Water and moisture can get up under the switch, which shorts it out. There were three different repairs for the same issue. Last time the same service man repaired the problem and he was so careless. He got silicone all over the granite counters and switch, which he didnt check before leaving! I called him back to my house before he even got out of the neighborhood. Ultimately, he admitted he screwed up and ordered me yet another switch. Now, just today, my Monogram dishwasher started billowing black smoke. I called GE to find that the unit has been recalled for electrical shock and fires. They said I could have it repaired (if the service man deems it repairable) or it’s $400 towards a new unit. Is this company for real? How many consumers do they have to lose before they wake up? If I werent home my house could have burnt to the ground or, worse, one of our kids or us could have been severely hurt or worse. Do they not realize the liability they would have at that point if the worst would have happened? And they have two phone numbers and my address on file. Why on earth would they not contact me to tell me of the recall? Are they holding their breath and crossing their fingers that nothing too bad will happen? I have a Whirlpool fridge/freezer that is 18 years old and in my garage; nevertheless, it has never given me an ounce of trouble. I will never buy another GE appliance again and will tell anyone I know the same, including the several new home builders I work with. There are too many other companies out there that will back up their quality products. I have called into GE on my latest problems. And if I dont get satisfaction (i.e., brand new units), I have no issues contacting the attorney general. There are forms online that can be downloaded so a formal complaint can be filed. I urge anyone else to do the same.

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

My life partner/bf moved into a semi flipped 10 yr old home. Every single appliance required to be replaced, everything from refrigerator, stove/oven, to dishwasher. We researched every appliance we purchased, a lot of time and effort along with reviews from various reputable reviewers, pointed us to the GE GDT DISHWASHER. Who can go wrong with three tier washing amongst jetted water bottle washers?After a 1 1/2 yrs in the top spinner completely separated from its housing. We googled the problem, GE said it was a faulty design, yet no recall. The door lock began to fail, googled the repair fix, another fault design, yet again no recall. Upper plastic door trim broke in half, solution, replace the entire console. Guess what? My solution here on out is to not buy GE products. If two years is all you get with a GE product, I am out! Done with your products that once lasted 10 to 15 years. The fact that have to research another DISHWASHER, absolutely pisses me off. I dare you GE to win me back!

I bought GE Microwave JES1139BL03 in 2011 and the white paint inside has been peeling off. I think it is defective because I have had other brands and none of them have done this. This microwave was manufactured February 2011.

Bought model DDT575SMFES less than a month ago (along with a new microwave, stove and fridge) from the Home Depot. When the appliances were delivered the stove had some flaws in it so it had to be replaced. The dishwasher is a whole other story. It worked fine for a week but now it takes forever to get it to turn on. We try and try but it just beeps and the light flashes. Once we do get it turned on to stops before completing the cycle. If it does run a full cycle the soap dispenser does not dispense the soap. I wish I would have looked at this site before purchasing these GE appliances. Total junk and will NEVER buy anything GE again if I can help it. No responses back from GE and from what I read dont expect much from them. Now we will not be able to match the Slate with another brand and are stuck here.

My GE microwave oven turns on by itself. The GE microwave oven model number: JVM1540DN1WW. The serial number is: RS903539B. My GE microwave oven turns on by itself usually as if the one minute express button was pressed in. This has been occurring for about 2 years and has been doing this normally when the air conditioner is not turned on. It appears this is a humidity issue. All summer it has been working fine. As the weather has started to be lower and we turned off the air conditioner, the problem has come back. When the temperature rises and we put the AC on again the unit will work fine. We live in Florida and it can be humid outside but with the AC turned on the humidity is lower and the microwave will work fine.

My GE microwave just 3 years old, from inside started coming off. Called the company they say its normal and harmless??

I also have a GE Profile dishwasher with malfunctioning wheels. I read this site, and was comforted and enraged that I was not alone with my melting wheels. I sent GE customer service a note, explaining my problem. I also included a link to this site in my note. I explained that I was a loyal GE customer and that they should stand behind their products although my unit was no longer covered under warranty and did not qualify for the recall. GE responded to my e-mail with in 12 hours. They sent me a complete set of new wheels for my bottom rack free of charge, and sent out a technician to install them, again free of charge. They also e-mailed me to make sure I was happy and no longer had concerns. I am thrilled with my experience. Let me say that again I e-mailed GE and within 8 days (a holiday included), I had new wheels and a technician to install them at no charge.

I bought GE Profile dishwasher (PDT750SSFSS) from Home Depot on Sept 2014. First week it had some drying issue and GE service technician told no issue with dishwasher. After 4 months, electronic control board stopped working and GE service technician replaced the board. It worked for about a month and again same control electronic board failed and need to be replaced by GE technician. Again within a week again board failed for 3rd time. This time I asked for a replacement from GE since same board failed 3 times but GE refused to replace and told they can only repair and cannot give a replacement of dishwasher. Again for 4th time same control board failed now and I have contacted Home Depot for help. I dont know what to do this time and I dont want to repair this dishwasher anymore. It is only June 2015 and it had been repaired for more than 4 times. Ill try through Home Depot to get a replacement, if not Im planning to go through consumer court and file case against GE Profile. I would appreciate if somebody can help in resolving this issue and you can contact me through my email.

I bought a GE Profile dishwasher and have the same problems of residue on the dishes. My dishwasher is only 4 months old. I paid top dollar to get the same line as my refridgerator. This dishwasher should clean the dishes sparkling clean for what I paid for it. Disappointed in Cobden

I have a built in model that is now 9 yrs old and still operates as well as the day I bought it! I will definitely buy GE again. I have family members that have owned 2-3 microwaves to my one, that screams quality.

I had a new GE profile microwave which broke off couple of times and finally after 4 years of using it had to replace it. Since it was a built in so had not many options for replacement and went for GE again. This time the new microwave had a faulty door switch. It wasnt opening up every time. Scheduled an appointment and no one showed up - waiting for the whole day. I called the customer service 3 times and learnt that they had ordered some parts and were waiting for that. No one called and conveyed me this. I learnt myself after waiting from 8 am to 5 pm and upon calling them. They rescheduled me for a week later so that the parts can arrive. The day before the appointment I called again and now they dont have me in the scheduled appointment and got another appointment a week later. IT IS SUCH A BAD COMMUNICATION BY GE. I will NEVER recommend GE to anyone.

Excellent. The dishwasher cleans dirty dishes and dries them as I expect. We use all the features periodically, usually the RINSE & Normal wash daily. We rarely use the China setting, but we do use the pots and pans and hygienic features as well. We also occasionally use the delayed start feature. Our dishwasher is a decent size four our family for daily use and for large get-togethers. Our house came with a WHITE dishwasher, which were not totally fond of as a personal preference, BUT, its LOOK and design are fine by our standards. We have had a problem with the door catching on the screw that holds the dishwasher in the cabinet. Seems like a simple fix, but it hasnt been. Id like to see that problem go away for any dishwasher installation.

I bought a JVM3670SK05 a little under two years ago. It is an above the cooktop vent-a-hood microwave. I believed I was buying a quality unit. Now everything is working, but there’s no heat! Even the cheap units from Walmart work longer than this expensive piece of crap! Now I either have to spend enough to buy a new hood for cooktop and new microwave or pay the same price and buy parts in hope that they will not go out again. Not really feeling lucky with the GE product.

Microwave GE Monogram - For the second time in as many years, the glass door on my microwave just blew out and spewed glasses all over my kitchen. Luckily, no one was hurt except we are still getting glass in our feet a week later. My husband and I both contacted GE by email with no response whatsoever. Clearly, having read about this happening to many others, this product should have been recalled. It is their top of the line. The microwave wasnt even in use. GE must not need any customers and they have sure lost this one.

Bought a PDT845SSJ2SS in June. Two months later, it has a leak. Good news, has a leak detector which shuts down the machine. Bad news is that it leaks and the leak detector worked! Called GE. We dont have an authorized service technician in your area. We will get back to you within 3-5 days. Three days later, after I had raised rain with my appliance dealer, he arranged for a local dealer to come look at the machine. Scheduled that appointment - it was Friday, and We only come to your area on Tuesdays and Thursdays. Next Tuesday is booked, so we will try for Friday. Then, someone from an organization called Platinum Services calls and says GE has assigned the ticket to them. Shes going to try to schedule a diagnostic appointment in the next 7-10 BUSINESS days. Told her to forget it (found out she was calling from Lowes and had to find a technician before she could schedule.) End of week 1. Following week, someone else from GE calls and asks if I was cancelling my service request. In the course of the conversation, she asks to confirm the model GE RANGE that I have. Kinda lost it on her... On Thursday serviceman from local dealer comes. Turns on the dishwasher - it leaks exactly where I had said it would. Need to order a part and GE will not expedite. End of week 2. Next week - crickets. Nothing, Nada, mushroom mode (in the dark and being fed BS). Called my appliance dealer today and told him to come pick up the dishwasher - says he cannot do that. I explained, “I will forfeit the money I paid - I dont want a dishwasher that leaks in the first two months of use.” He tell me GE released the part yesterday...whatever THAT means and he HOPES repairman will come next Tuesday to repair. So, I have had a new GE dishwasher for 3 months and it has only worked for 2. Be aware! I assume partial responsibility for this goat rope - I faithfully refer to Consumer Reports when purchasing appliances and electronics. I suggest you do the same... you will find GE listed AFTER BOSCH, KITCHENAID, KENMORE and others. Also, realize the GE brand is now a CHINESE company. Caveat Emptor!

I called GE, b/c the microwave has paint flaking off and piling on top of my food. Just like snow flakes. You tap the inside-ceiling with your index finger lightly and it looks like theres a snow fall inside the microwave. Lots of metal is exposed. GE answer: metal is non-toxic, do not worry if small amounts ingested! Told me to not use it anymore and replace it at my own cost. After insisting that they are responsible for a defective product, they will give me a break of $100 on the price, conditioned on them confiscating the above microwave (so you or someone else does not use it). Bad deal. I am looking for another brand!

I am rating my over the counter GE microwave model no. JVM3160RFSS. Ive had it for over 2 years and its still performing well. Pros: Solid feel, sturdy door mechanism, easy to clean interior, attractive design, fairly quiet, adequate lighting inside, reasonable price, fan works okay for moderate smoke, short reheating times for lighter fare, cooks frozen foods quickly. The integrity of the interior is good with no chipping or cracking. Cons: Fan is inadequate for heavy smoke if searing beef, hot and cold spots while reheating heavier foods such as mashed potatoes or casseroles, controls are hard to see in dim or moderate light. A suggestion to GE would be to make microwaves with optional backlit buttons to see at nighttime or in dim lighting. I like that GE manufactures most of their microwaves in the United States.

Let me warn anyone out there looking for appliances. We have had our 2 appliances for a little over one year, about 14 months. It is just me and my husband, very little wear and tear. Both convection oven and dishwasher not working. DO NOT BUY!

Microwave Oven-Space Saver Model JVM6172DF1WW - This is the same problem that is well documented across the web regarding this POOR General Electric product. I purchased the microwave about 14 months ago and the keypad abruptly stopped working. After checking the electrical circuits from the main box to the device, I determined that the problem is not due to the electrical connection. GE appliance division has been in a poor state for a long time now. The company manufactures this product outside of the U.S., in this case Malaysia, and obviously has a poor quality assurance - quality control plan in place. Couple the production issues with poor customer service and you have a huge, well respected company that is putting out shoddy work.I will be trying to get someone to take responsibility for this problem within General Electric but recognize that any success in that respect is a long shot. My message to other consumers is succinct and to the point - DO NOT purchase this product with your hard earned dollars. Go with another brand with a company that stands behind its products and wants to keep the customer coming back for more. GENERAL ELECTRIC is not one of those companies.

I am so disgusted. My 1 year and 2 months old microwave could have burned down my house. It got very hot so much you couldnt even touch it! Microwave product code JES1344SK. This should be a recall and customers should not need to have to pay for these to have them fixed. GE should be grateful this didnt start the house on fire and no one was killed by it! I will never by GE again!

Does not clean well nor dry well even on the more powerful cycles. I rinse off all the food and if anything is accidentally missed, it just gets baked on. Very disappointing. Also much of the upper rack item remain very wet at the end of the cycle. Drying issues: I use the most powerful drying cycle option but contents remain wet at the end of the cycle, especially plastics and top rack utensils. Not just damp, but large drops of water remain. Cleaning issues: Even when I use the heavy cycle, unless I remove all traces of food from the contents, the food remains and worse, now baked on. This model has a sanitized cycle so basically I use this dishwasher to sanitize only rather than clean, dry and sanitize. Completely unacceptable.

This unit is an over the oven with a vent fan, lights, and is paired with my GE double stove. I bought this microwave was purchased for more reasons than performance. It has been used frequently for over 5 years with no problems. It is easy to use and the food with this model (which has the rotating tray) heats the food evenly. No problems, functions with ease, and dependable.

My GE counter top microwave (JES1456), purchased from Home Depot less than a year ago, just stopped working today. No lights, or anything. The electrical outlet is fine. The GE warranty appears to be effectively meaningless. It is cheaper to replace the oven, than have it repaired. I will avoid GE products in the future.

Our dishwasher has only ever served as a dish wetter or drying rack. It has NEVER CLEANED DISHES UNLESS they were put in the dishwasher already spotless. We have a GE Slate with hidden controls. Now, the racks are rotting away and the cost to replace them is nearly the cost of the entire unit. We are going to throw this one out and get a new dishwasher of another brand. DO NOT BUY GE DISHWASHERS!

I bought a GE Adora dishwasher from Home Depot. There is nothing technically wrong with it - in other words - it is not malfunctioning. It is just that its normal operation is AWFUL, in my opinion. The PROS: it is very quiet. The CONS: it does not clean your dishes! And since this is the primary function of a dishwasher - I would say it is a complete failure. Originally, I had hard water, and I thought that was probably the issue. I purchased a whole home Kinetico system, which remove almost all particulates from the water, and makes bottled-water-quality drinking water. (On a side-note, I would TOTALLY recommend the Kinetico system!) But even after having the water issues fixed, the dishwasher has NEVER worked properly. I have used every type of dishwasher detergent, including Cascade Complete & Platinum, Finish Ultra & Quantum Powerball... and I have also added rinse agents etc. Basically - whatever state your dishes are in when you put them IN the dishwasher, they will only be slightly improved when you remove them. Even if you SOAK the dishes first, they come out with all kinds of residue. It does an especially horrible job on glassware, but silverware is also terrible. And I have to re-wash by hand every coffee cup that comes out. I truly loathe this machine, and will replace as soon as I do enough research about a better brand & model.

Periodically my GE Profile Dishwasher will not clean well. On every occasion it is due to clogging of spray ports on the upper and/or lower spray arms. Removing the blockages is nigh-on impossible as it is often not possible to extract the blockage from the outside and its not at all possible to flush the blockage back down the arm to extract it at the centre. All that is required is a bit of forethought and the creation of some access to the arm. I was frankly surprised to not be able to find a replacement arm as the suggested solution to this problem, the additional part revenue being part of GEs the business model. There are a number of other design issues with the assembly at the bottom that make me think it was done by an intern and nobody checked her work at the end of summer break before it went into production.

I have been trying to get this dishwasher to work since April. I have had it serviced 2x and yesterday the board was replaced. Soon after the dishwasher started to say the same thing again. Press start and the cycle is paused and will start in 3-2-1. it does not start but repeats and beeps over and over. I have done everything in my power to get this rectified. It will run out of warranty in October and I havent been able to use it. As a consumer I am demanding a usable product that I spent my hard earned money on. Here is the model CDT875P4N2W2. I will go to any lengths to get some attention in this matter and I hope Consumer Affairs can contact GE Corporate for me.Dr. David ** Lewes Delaware

Paint is peeling on the top part of the oven. It could fall into food. This seems to be a common problem. Called GE. They said it could not be repaired and to stop using it. Buy a new one. What kind of product do they put out that cannot be repaired? Not very good in my estimation. Customer Service did not offer much assistance to replace it. Be warned. Don’t buy GE products.

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

We purchased a GE JVM6175EFES microwave oven in 2014 and are now on our 4th unit. When cooking food, condensation forms and drips down the wall behind the microwave. GE replaced it with another, but it was a rebuilt unit which when operated caused sparks and smelled of something electronic burning inside. So another unit was ordered and delivered damaged. Now after a year, the 4th unit is once again causing condensation on the back wall. GE has no answer or explanation for this problem and really doesnt seem to care. This is just one of several problems weve had with GE appliances. We also had to go thru 3 refrigerators to get one that was not damaged from the factory. We will be trying to replace the microwave with a different model, but doubt if GE will work with us to get this resolved as their customer service has been no help at all. DO NOT BUY GE appliances.

My 5 years old over the range GE Microwave Oven in my old house had a keypad malfunction. I replaced that oven with a different brand. This time, my 2 years old GE profile microwave in my new house has the same keypad shorted like other users posted. I was hesitating to buy this brand at the time. But the look and match with other appliances, plus the good deal from vendor, I gave it another try. I made a terrible mistake. No more GE appliances for me.

I have a GE Cafe Microwave that I have only had 3 years. The other night, the outside glass shattered into 1,000,000 pieces and the microwave was not even in use.

I love my new GE dishwasher! I love the stainless steel look it has. It is very easy to use. It cleans my dishes really good. It is quiet. I feel like it's doing a wonderful cleaning job. I can't wait to replace my other kitchen appliances to match my new dishwasher. I did a lot of research on this dishwasher before I bought it and it had many good reviews from other buyers. That's a lot of the reason I bought it. I love the inside of it. It has so much room inside. It really rinsed my dishes well. Not a bit of soap stains left on the glasses and silverware. I don't have to rinse my dishes real good before putting them in the dishwasher. It does a good job at getting the stuff food off. I would recommend this dishwasher!

Updated on 12/30/2018: Again had GE up, said it was not the pump as they stated. Hired a plumber as they requested, pipe not blocked. Changed connections and now the machine has no power. Again have to call for repair. I am sure they will have to order a part or tell me to call an electrician. I am so done. Please beware. Do not buy. Still not been able to use my dishwasher going on 4 weeks and brand new.Original Review: Purchased from Home Depot. I have had it for only one month used 4 times. The water did not drain. Called GE Repair. Guy came down, couldn’t figure out what was going on, said it must be the pump or it could be blocked. He went downstairs, could not find the pipe. Been there since 69...said he is going to order part. Waited 1 week. Then he calls me an hour before he was to be here. Mind you I took off work to be there. He said, “Did you have plumber to come in to see if there is a blockage and he needs to show you where the connection is?” Are you kidding me. I told him I am handicapped and having company for Christmas and I need it. He said he can’t come until I hire a plumber as he can’t find the dishwasher connections. Are you kidding?I said, “Can you come and install the pump and if it doesn’t drain then I will call the plumber.” He said no as he can’t find the connection...I am going to put 150 to have a plumber come when I know it’s the pump not a blockage to have the plumber show me where the dishwasher is connected because the idiot can’t figure it out. I said I need it for Christmas. Nobody working until next Wednesday. Do not get a GE. Poor customer service and to break down a few weeks after purchasing is unacceptable. I had A Bosch for 6 years, never a problem. Plus the lower rack tracks already fell apart. I live by myself and does not get much use. I read the reviews and should have known. The only reason I purchased I needed the bisque color. BUYER BEWARE.

This is a very nice brand of microwaves. Has easy touch from 30 sec to 10 mins. Meaning you touch start for the 30 sec and press 1 for one min - just hit start after. The only bad thing is the plastic coating over the buttons is starting to rip. Not a big deal just doesn’t look as nice.

My dishwasher does an excellent job - its a bit slow, but it gets the job done reliably. It is probably slow only because its old and somewhat tired...It does a great job cleaning off remains on dishes, which is not always the case. It doesnt fail me.

We purchased a GE microwave/convection oven which developed peeling on the inside top of the microwave. GE contacted me and offered a replacement ($300 toward a shelf model or prorate the microwave/oven). Why would we take $300 replacement when we paid nearly $3000 for this oven???? So we took the prorated one directly from GE. We felt confident that we would not have a repeat of the problem. The oven was manufactured in December 2012. After it was delivered, I noticed a rough area on the turntable; and after the oven began to peel AGAIN on the second oven, I believe that the rough area was due to a remanufactured part on the oven.Now we are stuck with another microwave/convection oven combo with the same issues as the first oven. I never used anything harsh to clean the oven and now this happens again. Why cannot this company manufacture an oven that will not have defects in it??? I am tired of peeling paint on a second oven when I have done nothing except pay them for 2 ovens. Why cannot they use stainless steel interiors, and this would stop the many complaints that people make about the product. I would NEVER again purchase another product from this company. The products I have purchased have been inferior. I paid for two microwave/convection ovens and still have one that is inferior!!!!

We upgraded our appliance package when we bought our village builder home 8 years ago. All GE Monogram appliances have rusted and now need replaced. New liners needed in oven which was so rusted we couldnt get the screws out to replace the originals. Was told by GE customer service rust to be expected when cooking. It creates steam and food particles can cause scratching!!! Maybe it should be steam proof especially a microwave. Even the door on this is rusted! Why the shelf ends in a freezer are rusted not sure on that one! Will NEVER buy this brand again and shame on them my upgraded appliances dont even make it to 10 yrs. A disgrace. My mother just replaced her 20 yr old oven. What is wrong that nowadays things dont last 5 minutes? Shame on you GE not recognizing a definite flaw in your products.

In 2008 I redid the entire kitchen and purchased all GE Profile stainless steel appliances thinking I was purchasing quality items. Well, it didnt take long before the dishwasher broke but it was fixed for free by GE under a recall. However, now the refrigerator has begun to leak under the right corner of the ice/water dispenser located on exterior of freezer door and the microwave touchpad has also failed as I need to press below the actual keys for it to work half the time. When I spoke with GE customer service they basically told me there was nothing they could do with the refrigerator, I would have to call a repairman and have it looked at or pay their $100 diagnosis fee.The microwave they told me had issues with that particular touchpad and had it broken within first 5 years they would have repaired it for free under their recall program. But since its 7 1/2 years old I would have to buy the touchpad which normally only lasts for 6 months to 1 year or buy a new GE microwave and they would offer a rebate. Im so unhappy with their customer service and poor reliability of their products that Ive passed on each offer as I dont want to contribute another penny to a company that in my opinion is unethical and has horrible reliability. 3 out of 4 of my fancy GE Profile stainless appliances have broken! Thats a 75% failure rate! No thanks, Ill buy elsewhere. No wonder they cant sell their appliance business and why the stock hasnt moved in years... Wake Up GE, do whats right for your customers!

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

The first GE microwave never worked right out of the box. I took it to school and let my Physics students (I am a science teacher) tear it apart and find the trouble. The magnetron was broken. Since it could possibly have happened bringing it home, I decided to let it go and went and bought a new one. This one is less than a year old and has the very scary habit of coming on by itself. When I go in there, it says it is defrosting, or beverage, or any number of reasons. Tonight, I will unplug it, chunk it, and go buy another microwave. One can bet that I will never buy another GE product.

I have had two service calls on this dishwasher (Model Number GDT65SMJ0ES) and it is 18 months old. The first was to replace the heating element, which was under warranty. The recent problem was a cut-off switch that will trip when needed. The technician hooked up his computer to turn it back on, a very quick procedure, and it cost us almost $100. This unit should have a trip switch like a vacuum or garbage disposal so that the owner can do it themselves. After that, if the dishwasher still doesnt work, then a call for repair could be made. By the way, the repairman was very nice and respectful to us.

Purchased an entire line of GE appliances for kitchen after having prior (still working) appliances for 13 years. Have had at least 5 services calls and countless emails and phone calls for non functioning Dishwasher. Here is response from GE Manager: I have reviewed the pictures and no I would re-wash those 4 dishes if they came out of my dishwasher prior to using them with my family. Dried on fruit, starches and dairy are tough for any dishwasher to take off as the sugars in them act like glue. Again for these types of foods we would highly recommend more pre-washing to make sure that they are not left on the dishes after the dishwashing cycle. CAUTION: DO NOT BUY.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

We had a GE dishwasher installed by the builder when the house we live in was built and it was one of the ones which were recalled as a fire hazard. We didnt really have any issues with it though, other than it was a bit noisy. With the credit offered, we decided to upgrade to a high end Profile model. The sound proofing is impressive and it was actually hard to tell the unit was on, but that is the only thing you can say that is good about the machine. As a dishwasher, it fails miserably and often items come out dirtier than when they went in. OK, weve struggled on with that for some time now but today, a nasty burnt plastic smell brought us both to the kitchen to investigate. Sure enough, the replacement for the fire hazard was the culprit. Obviously, it will need some serious repairs before it is safe to use once more. Looking through this and other sites, it seems this problem is rife and GE is reluctant to deal with the issues. Well I think that will be our last GE appliance. Thank you very much and rather than throw good money after bad, we will put the repair costs towards another machine ABGE.

I have had the GE Unitized washer dryer for 4 months with no problems. It has the cycle choices I need for washer and dryer. It's easy to load and remove clothes, even if the washer tub is a little deep. It washes bulky comforters, coats, heavy denim, bathroom rugs just fine. The dryer is big and quiet. It works like a HE but uses all types of detergent. Great buy! Gave 4 stars for function only because all models do not have a "rinse only" choice.

I purchased a General Electric model peb7226df1ww in 2013. It lasted two years, then failed. I replaced it and two years later the replacement failed. At least GE microwaves are reliable in that aspect. You can count on them to fail. I am convinced GE installs a delayed kill switch on their microwaves to help their revenue stream. This was the last GE appliance I will ever purchase.

GE continually shows us why they are failing as a company. In just this last year I have replaced a less than 5 year old GE microwave, three separates parts to my GE monogram refrigerator, and now this one and a half year old dishwasher. The only appliance that GE makes that hasnt broken is the stove/oven that is over 10 years old and shows no signs of weakening.I purchased the upgraded stainless steel model that contained all the bells and whistles. It lasted 1 year and 3 months before the entire control panel stopped working. We utilized the dishwasher about once a week or once every two weeks in a two person household. Hardly a rough environment for a 700$ appliance. The repair costs was quoted for 99$ just to have GE look at it. The control panel was 140$, plus additional labor. This amounts to over 280$ to repair a year old product. I advise buying LG or Bosch.

GE Profile Model PDW9980L00SS about 5 years old overheated and melted the bottom water sprayer into the element along with anything plastic in the dishwasher at the time. Grateful my husband was up late that night, otherwise, it would have caught on fire. It was not shutting off, had been on about 3.5 hours when it was discovered.

I needed a microwave, and researched a lot of brands, some the buttons quit working, others sparked. Found this GE on sale at Lowes about 4 years ago for $29.00 and so far I am very happy with it. I must admit it is a little big, but it works beautifully. It does fit on the counter, so for its size and the price it is a great deal!!!

5 years ago I updated my complete kitchen with Adora LG appliances. To my dismay, the handle on the microwave (Model DVM1950SR1SS) began peeling like paper. Now I have a white plastic handle that’s supposed to be stainless steel as an eyesore in the middle of my kitchen. When I called GE replacement line, I was informed the handle was $164! My 5 year old kitchen is out of date! As far as I’m concerned this is a defective part and GE should replace it at no charge. I have been a faithful GE purchaser for many years. After this mishap, I will no longer recommend GE appliances or will I purchase them.

Touch panel gets too hot from the stove and fails. Have to unplug it all the time to reset. Door handle unscrewed and inside coating is peeling. Had repaired three times. When least expected, I have to empty the cabinet above to reach the plug.

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

A GE water heater was installed in our new home in 1962. As of today, November 2, 2014, we are pleased to let you know it is still in excellent working condition 52 years later... Way to go GE... The only update we changed lower element twice in 52 years!!!

Dishwasher Disaster SR# TD729818B M# CDT765SSF1SS - Please, Please, Please, help me to come up with a solution with the issues that have plagued me and my family since we purchased the dishwasher referenced below in the numerous e-mails and electronic correspondence! As I write this E-mail, the GE Assigned warranty repairman has the dishwasher in question torn apart and disassembled for the 3rd time in the last month and half (Please see included photos). A repair I was told was only going to be minutes to conduct has now lasted over 3 hours and caused me to miss a very important appointment. That time frame will go at least another hour if the repair is even possible? Not to mention that a dishwasher that has been used less than 25 times has once again been torn apart and reassembled. I dont care how well built they are, this in my mind affects their performance!The repairman from JK Appliance has spent at least 12 man hours of repair time on the dishwasher, made a half dozen calls to your tech support (check your records), and has never spent less than 4hrs here on a visit. Once again, I have to be here for those visits (time out of my day) plus the stress of watching a brand new $1600.00 dishwasher dismantled time after time! At what point does G.E. make a decision that the amount of money being spent to repair a defective machine is not worth it?? I have to believe that 12hrs of repair time plus an hour of travel time for three separate visits each way, has already added up to the price of a new/replacement dishwasher?The other two G.E. appliances (microwave/Gas Stove) purchased with our remodel last year have performed flawlessly and we are happy with them. However, the trouble with the dishwasher has soured us on ever considering G.E. again! I plan on sending this E-mail and attachments to every consumer/watchdog group (Consumer Affairs) that Im aware of and to the store (Lowes- Farmington N.M) that the appliance was purchased at. This is not meant to be a threat, Im just at my wits end as to how to get to the end of this long tortuous journey that a simple appliance has caused for me and my family. Yes, there are certainly more pressing problems in the world, but right now this is the one that is currently affecting my family and the happiness in our home!Please advise if there is another route that I need to go with this problem including any alternate points of contact (GEs Escalated Issues department). My phone number is ** and maybe a simple personal call of apology from someone at G.E. explaining what my alternatives are would be considered? Thanks for your time and consideration.

It works well. We like this newer GE Profile with many preset buttons such as for different times and food types, and defrost. The last GE Profile MW we got had a knob that got loose right away and hard to use, like a dial-up AOL, so this upgraded model is much more convenient. I like the bigger plate size, and that the turntable can be turned off if we put a rectangular casserole dish in there.

GE microwaves are crap. In fact its not restricted to microwaves. Its their ENTIRE line of appliances. They team up with other grade e or f manufacturers for appliances (ie: LG, Samsung) and ANY GE appliance is almost guaranteed to fail prematurely. I see all these comments bucking Malaysia and in all reality the fact remains that Malaysia makes damn good stuff (think SONY). But it is the COMPANIES that build the products and how much theyre getting paid that factors quality. No doubt that GE is using the bottom dweller rejected off the assembly line parts to build their units. Most are Chinese garbage. China also builds some very reliable products but as the saying goes dumb American will buy anything. They save the best for them and sell us the crap.It is the lowest grade of those already should have been scrapped at the factory parts that GE passes off as quality and they do a good job at showing it. A cheap 30 dollar China made Emerson microwave made by Daewoo (Korean company that actually is decent) lasts longer and takes a hell of a beating compared to the overpriced rejected junk we call GE. The GE ac units are another classic example of pure garbage. Sadly the older GE works forever. That should sum it up. Why didnt the GE executives while visiting Thomas Edisons grave make every effort to step away from his grave and not stand upon it? Because Thomas Edison would pull them under.

The microwave oven that I’ve been using works real well and it’s not that expensive. It’s also a convection oven at the same time. The only reason I didn’t give it a 5 is, I rarely give that high # to anything with rare exceptions.

Installed by builder of home. Mid level SS model, very quiet. Does not dry dishes completely. LED lights on control panel remain on indicating cycle even when finished.

Wow, Donna from NJ, I could have written your dishwasher report! But since I didnt, I have never been so disappointed in an appliance purchase as my new GE dishwasher! Not only are some of the dishes & silverware coming out more dirty than they went in, it takes a ridiculously long time for a cycle. And if there are more than a couple of tablespoons of water on the door, it will pee out onto the floor when the door is closed! Not to mention that there is junk stuck to the floor just inside dishwasher, under the door, after the cycle has run! Yet the worst part is how dirty dishes are after even a Sani Wash cycle! Sometimes, the detergent lid is still closed. Sometimes its open, but the detergent is still there. Even then, dishes may be cleaner in appearance that time, than when the detergent is gone. A water glass, may have gritty stuff - not just detergent stuck and hiding down inside, or more obvious all over inside the glass. I have spent the past year experimenting with various things: detergents, amounts of detergents, arrangements of dishes, heat of water, pressure of water, rinsing dishes before cycle, etc. Glass and pottery normally fare better than plastics, but again the plastic may have started cleaner than they come out! The dealer has been out three times, finding nothing obvious the DW itself, nor anything I have done wrong. He has been told there is a kit that would fix the performance problem, but he cant purchase it, nor can his distributor. I have been told the length of cycle is because our government regulates the amount of water used. So my question is, then its okay to use more electricity?! Its totally embarrassing to serve someone a drink in a glass that is found not clean near the end of the drink! And I, too, have an old 12-years-dishwasher that still works! It was even a cheaper brand. I never had to think where pieces were arranged in that dishwasher. I just thought, in my newly built house, I should have new appliances!

Purchased this dishwasher March of 2015. We have had at least five service calls because it does not clean the dishes. Glasses with just water in them when they went in the dishwasher come out dirtier than they went in. Residue is worse on the glasses, but other dishes are not getting completely cleaned. Forget it if something is stuck on, if you dont prewash, you are washing them again. GE has replaced numerous pieces, blamed our water was too hard until they found out we had a water softener and water system and then blamed that instead. We have changed soaps (five different brands), tried every setting in multiple ways, turned off the water system and just had the water softener run, turned everything off and nothing improves the quality of the clean. GE has even refused to pay the service technicians that they GE sent out to repair the dishwasher. Now we cant get anyone to come look at it because they are afraid they wont get paid. We have had three dishwashers prior to this one and have never had an issue with the dishes coming clean. We have maintained that there is not enough water pressure to rinse the dishes, but they are adamant this is not the case. Regardless, the dishes are still not coming clean. All we want is for it to be fixed, replaced or our money refunded. GE customer service is terrible.

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

I have a new GE profile model PDWT380VSS - Two in fact. The first one kept breaking glasses in the top rack. GE technicians could not find an answer so they replaced the Dishwasher. Now six months later its doing it again. This replaced a perfectly good, older model as part of a remodel. Theyll be sending another tech who I suspect will not have an answer. Any thoughts on what could be causing this or a way around it or is it to be expected? The first GE profile I had for several years with no such issues.

It has never cleaned good. It does not load easily. We have tried numerous dishwashing liquids etc. But none clean well even though we rinse the dishes first. This is their top model. Very disappointed.

I purchased a new GE over the oven microwave to replace a 10-year old Spacemaker unit. After three weeks of use with no issues, the unit overheated excessively during a normal use. The heat was so intense that the pegs that hold the racks melted causing a severe burn on my sons thumb. I unplugged the unit fearing further injuries and/or fire. Are GE products manufactured poorly or did I get a lemon? Who knows? Anyone else have a similar issue? I am still waiting for GE to respond.

I have had my fridge since 1984. It runs great and I have not had any problems with it. The freezer is on top and it keeps the food well frozen. I think the key to keeping food properly chilled and frozen is setting the temperature controls properly.

I remodeled my house 5 years ago and went with the GE Profile appliances in my kitchen. Last week I had run the dish washer cycle and noticed the soap had not dissolved and the dishes didnt seem to be clean so I ran the cycle again. I started it at about 8 pm and we went to bed not thinking any more about it. About 1 am I awoke to a horrible plastic burning smell. I checked through the whole house and could not find where it was coming from until I entered the kitchen. As I entered the room my eyes started streaming from the burn. I opened the dishwasher and smoke starting bellowing out of it. Not just smoke but a toxic smoke filled the room. The inside of the dishwasher was so hot and everything plastic inside was melted. The bottom drawer and parts of the dishwasher were also melted. The silverware tray full of silverware was all melted together. This all occurred in a matter of 5 hours. Had I not woke up when I did, who knows if we would have woke up.The house was full of toxic smoke that did not trigger the smoke detectors. We just went ahead and purchased a new dishwasher and had it installed yesterday. This morning my husband decided to do a little research on this product and found there was a recall last year. I contacted GE and found that our model was not part of the recall because it has a stainless steel interior, only the plastic interiors are part of the recall. I also found out that had we called them and had them send out a certified GE technician look at it, they would replace it. Too late it has already been replaced and sent to the recycle center. I did take pictures and have record of the model and serial number which doesnt matter. I just want to get it out there that this product is also dangerous and a fire hazard. This product could have easily caused a fire in my home. I also wish I would have done more research before we replaced it. Our new dishwasher is a GE Profile...

I purchased the GE Caf Advantium Oven Model No. CSA1201RSS. This is supposed to be one of their top of the line Microwave/Speedcookers and at $699.00 it should be. Within the first few months with little use, it made a loud buzzing sound and it went dead as if the breaker tripped. It was under warranty and a GE tech came out and repaired it free.The problem was the Magnetron, a key component inside the unit. I was shocked to see that the Magnetron was made by LG. I bought a GE because I did not want an LG, but I ended up with a GE with LG parts. The unit worked for several months and now it will not heat anything. I have only had this unit for 13 or 14 months and it is broken for the second time. I called the 1-800-GE-CARES to learn that they do anything but care. They told me it was out of warranty, but the parts are covered.It will cost me $99.99 for the tech to come out plus the cost of labor to repair the unit, which varies based on what needs to be repaired. This is unacceptable. There is clearly something wrong with this unit. I have had microwaves last 10+ years with no issues, and one of them was a GE! I thought GE would stand behind their products better, especially since they can see I had prior problems with this unit. This is a $699.00 tin can.

I just built a new home and opted for all GE Slate appliances. No problems so far with microwave, fridge, and stove but the dishwasher has never once been dry or cleaned all dishes. We have had it a little over a month! Today when I went to run it, there was mold growing! I had a KitchenAid for 9 years and never once did any of this happen. From reading other complaints, it looks like Ill be living with this for some time. I will never purchase GE again.

Microwave oven 2008 - The food doesnt go around anymore. The glass insert does not turn. What can I do?

Last year in November while we were sitting in our living room and watching TV around 11:00 PM, we first smelled smoke and then noticed fire under the countertop above dishwasher. Luckily, we were awake to put fire out and disconnect dishwasher. This was all stainless steel, top of the line Profile dishwasher, part of our all Profile line. The next day I called GE customer service only to learn that dishwasher was recalled and that we were never informed about it. Very generously, they offered to replace our unit with equal top of the line PDT750SSF0SS. Instead of taking them to cleaners, as my lawyer suggested, I was stupid enough to accept this offer. A week later, dishwasher arrived but straight out of box, the door was damaged and it was full of water for some reason?! Another week passed by and finally this piece of junk was delivered. This December of 2014, just 3 weeks out of 1 year warranty, dishwasher stopped drying dishes. I called customer service and when they learned that I never purchased extended warranty, they told me to hitch hike. They offered me special customer service number which I called, they placed my name on the list, and never called back. This is the worst company I ever had to deal with, the worst products hands down and the most horrible customer service. If you dont take this post seriously and do not run away from GE, I guarantee you will be writing one of these posts, few days after warranty expires. I have reason to believe that these machines are somehow programmed through their computer to stop operating after warranty is out. Monday comes, I am calling DA office and filing claim against this predatory company. BUYERS BE AWARE!!!

Model WES1130 GE Microwave - The entire interior of the microwave just started peeling off the coating/finish around 3 years after purchase. The turntable wheel guide path totally disintegrated the finish of the path. It still worked but was so unsightly and disgusting to look into the interior and possibly dangerous to eat anything that had been put inside to cook. I just got rid of it. I purchased another GE Model JES1460DSBB and it started malfunctioning after 3 weeks. I returned it and will not buy another GE product.

We have a GE profile dishwasher for about 14 months. I just found out last week that its out of warranty and that the 2 circuit boards inside are bad so the tech came out and didnt have a replacement board on his truck saying they never have problems with this dishwasher so hell order this part and be shipped to my house. He would install it on the following Thursday so Im sitting here waiting for service. I finally called to find out that GE decided that it is going to be repaired on Friday. I did not know this of course so I asked for a supervisor. I was put on hold with no answers, finally hung up in disgust.

GE Cafe Microwave CVM2072SM2SS - The touchpad stopped responding, like many other who have had this issue. GE would not give me a break on replacing the main and supporting circuit panel as suggested by the technician, so I had to pay out $500 on my own. After less than a year now the microwave wont heat. I liked the units looks and display but if it wont work, its useless.

I am using a GE Profile Spacemaker 2.0 microwave that is almost 8 years old. I loved using this microwave until the touchscreen cracked under normal usage. Has anyone else had this problem?

I purchased a full suite of GE Monogram Appliances about 5 years ago. All are fine except the microwave which was made in China. The back is rusting out, the inside is chipping at the door and moisture builds up in the door window. This progressive deterioration has taken place over the past 5 years. I paid $420 for the microwave plus $226 for the trim kit. Now, all GE wants to do is sell me a new unit and a new trim kit (will not fit old trim kit). I paid approximately $20,000 for the entire group. I bought GE because I trusted the name. Im stuck with GE if I want to match the remaining appliances. There are only two people living in this house so there is only minimal usage. To further complicate things, there is no serial number on the tag.

We purchased 3 GE Profile Appliances when we remodeled our kitchen. It turns out that they are junk. The microwave and the refrigerator have had to be repaired several times and the dishwasher went downhill very fast and we had to replace it as it was not cleaning the dishes correctly. We now are living with a microwave that has peeling paint that I hope is not damaging our health that they would not do anything about. And a refrigerator that was repaired today at the cost of almost $400 and it still is not cooling down. So now I have to wait 48 hours for another service call. Dont buy GE unless you want Junk!