Si está buscando ayuda para arreglar su Range AGA, ¡no busque más! Nuestra guía completa de códigos de error del Range AGA explicará problemas comunes, brindará consejos y le mostrará cómo leer los códigos de error de su modelo.

NOTE: The induction cooktop is able to self-diagnose a number of problems and can show this information to the user via the cooktop control display. Error codes may be displayed if your cooktop has developed a fault. If your appliance reports an error or is not working, you may be able to correct the fault by consulting the following. 

Problem: Error code E2 is displayed. 
The electronic unit is too hot. Please check the installation of the range, making sure that there is sufficient ventilation. In extreme cases, if a cooking utensil has been allowed to boil dry this error code may also be displayed. If in doubt please contact your installer or a qualified repair engineer. 

Problem: No display operation. 
Solution: Over voltage or loss of supply voltage to the range. If in doubt please contact your installer or a qualified repair engineer. 

Problem: Error code U400 is displayed. 
Solution: The range has been incorrectly connected. The control will switch off after approximately 1 second and the error code will be permanently displayed. Consult your installer or a qualified repair engineer. 

Problem: Error code Er followed by a number is displayed. 
Solution: The appliance has developed an internal technical fault that cannot be rectified by the user. Consult your installer or a qualified repair engineer. 

Problem: The fuse blows or the RCD trips regularly. 
Solution: Please contact your installer or a qualified repair engineer. 

Problem: The range will not switch on. 
Solution: Has the wiring system in the house blown a fuse or tripped an earth leakage circuit breaker? Has the range been correctly connected to the mains supply? 

Problem: The induction cooktop is noisy. 
Solution: When using the induction cooktop there may be some ‘noise’ emitted from the pan. This is normal and may be most noticeable when cooking on high power settings or if 5 pans are used simultaneously. The type of pan may also contribute to induction ‘noise’. 

Problem: Steam is coming from the oven. 
Solution: When cooking foods with a high water content (e.g. oven chips) there may be some steam visible at the rear grille. Take care when opening the oven door, as there may be a momentary puff of steam when the oven door is opened. Stand well back and allow any steam to disperse. 

Problem: An oven fan is noisy. 
Solution: The sound of the oven fan may change as the oven heats up, this is perfectly normal.

Páginas de códigos de error relacionados:
AGA Refrigerador Códigos de error, AGA Lavaplatos Códigos de error, AGA Distancia Códigos de error,

Páginas de resolución de problemas relacionadas:
AGA Refrigerador Solución de problemas, AGA Lavaplatos Solución de problemas, AGA Distancia Solución de problemas,

Páginas de reparación relacionadas:
AGA Refrigerador Refacción, AGA Lavaplatos Refacción, AGA Distancia Refacción,

Páginas de piezas relacionadas:
AGA Refrigerador Partes, AGA Lavaplatos Partes, AGA Distancia Partes,

Páginas de precios relacionadas:
AGA Refrigerador Precios, AGA Lavaplatos Precios, AGA Distancia Precios,