I was and, I repeat, was a loyal Dacor customer. I gutted and rebuilt a kitchen 9 years ago and purchased a Dacor stovetop, oven and microwave. I remodeled my new house 5 years ago and again purchased Dacor stovetop, oven and microwave. Consumer reports provided favorable reviews of the appliances I purchased below.First red alert: The oven Model MORS130S and Microwave Model DCM 24S LED did not match. The microwave was green; oven was blue. The brochure was in black and white so there was no way of knowing that aesthetically they were a mismatch ... it was very sloppy(!) and very deceptive by Dacor. I mean when I waited weeks for my appliance order and the oven is already installed with a big fat ugly LED screen, what was I supposed to do, yank it out and start all over again? This was disappointing!Next, I was simmering chili on the stovetop (5 burner, gas) and, lo and behold, 18 flames started exiting through the turn knobs resulting in a meltdown. The gas was leaking through the tubes underneath the stovetop. I just happened to check the chili while I was gardening to watch the house almost burn down and btw, it was difficult to put out the flames because the natural gas was leaking under the unit. Seriously! I called customer service and they got hopping right out to fix the issue. This scared the heck out of me. It is negligent to have a product like that on the market.After about 13 months into the life of the Model MORS130S oven, the touch panel failed emitting a CO1 error message. I was told it was $140 to fix it and that the panel was defective, great quality there, Dacor. And the added joy to the CO1 error message is that the unit beeps intermittently all day and all night long unless the power to the oven is killed. Joy... now another issue - Model MORS130S oven LED lights are burning out. Seriously, what else will there be? Now its $175 for LED panel and another $100 to install by an authorized Dacor service man.So I called Dacor back again today because the LED light out was annoying me. They offered nothing. To be fair, my appliances are out of warranty but seriously, Dacor nearly burned my house down. They should be winning me back as a customer if they really cared about their customers and having long term repeat business. Never again, Dacor, never!

Updated on 02/23/2021: Its been several weeks since I first posted. The only reply that Ive received was an email via this site that requested information from me on my claims. The info was provided the same day. A week has gone by since I provide the information and I have yet to hear back from Dacor. Not even a were looking into your issue. What I did receive was a notice from Samsung (who has acquired Dacor) telling me that one of my service tickets has been cancelled. I dutifully called the listed number to get more information... only to be told that the Samsung customer service rep could not help me and that I needed to call Dacor. Ive tried to approach this matter with humor up to this point but I am out of patience. Given the price I paid for these products, I expected a premium customer experience... the experience I have received has been abysmal.Original Review: I did not think that a customer experience could be this AWFUL or that a vendor could seem to care less than Dacor cares about resolving my issues. After 5 months, the exhaust downdraft that we purchased still does not work and Dacor either does not respond or - when I can get someone on the phone - I get any number of standard excuses (parts shortages, Covid, port backlogs are delaying deliveries, the integration with Samsung, etc, etc). I am also missing basic parts such as shelves(!) that should have been installed during the original installation. The retail partner (Specialty Appliance) does not seem to have anymore luck in getting answers.

Two years ago, we redid our total kitchen at considerable expense. All of the appliances we replaced were made by Dacor. They included: 1) a 36-inch refrigerator model EF 36/wf; 2) a dual wall oven, model EO230SCH; 3) a gas cook top, Model RGC304; 4) a dishwasher, ModelEDWH24S and; 5) a range hood, ModelEH3012SCH. The problems started within a two months of installation. The refrigerator stopped running due to a relay failure and a compressor problem; both were replaced by Dacor at no cost to us. It was inconvenient but not costly. A short time later, the lower wall oven stopped working as well as the lights in both ovens. This required the replacement of the main control panel (control circuit board). Dacor paid to have it repaired. The clock does not keep accurate time and gains about an hour a day. We decided to leave it well enough alone and did not have it fixed. After the one-year warranty expired, the lower oven quit again. This time, it had to be removed from the wall and an exhaust fan in the lower oven was defective and had to be replaced. Dacor’s initial response was it was out of warranty, so it was up to me to cover repairs. They eventually agreed to supply the part (about $90) but we had to spend several hundred dollars to install. Now, the lower oven takes an extremely long time to heat up, and again we decided to leave it well enough alone. Recently, there was a loud flash in the vent hood; one of the bulbs apparently burned out. My wife tried to turn off the lights in the hood but the light switch apparently blew when the light went and could not turn them off. After a couple of burned fingers and a melted bulb removal tool, I managed to get the other bulb out. A call to Dacor got the usual out of warranty response. I called the local Dacor authorized service rep. He looked at the problem ($95) and said he would have to call Dacor. After he talked to Dacor, they called me and said they would send a replacement control board but would not pay for the service calls. The service company said the next service call would be $195. One light bulb burned out: cost $290. I suspect that every hood unit that Dacor made with this control board is also defective. We have had to replace the halogen bulbs with great regularity. We have halogen bulbs in our boat that have lasted at least 15 years. There was another complaint on this board that had a similar problem with the vent hood. He decided to fix it himself. He is an Electrical Engineer his comments are worth reading and speak to the inadequate design of this unit. It is a shame that the Dacor appliances appear to be near the bottom in terms of reliability. Consumer Reports that their gas cook tops appear to be the least reliable. It looks like I have something to look forward to. Needless to say, I cannot recommend Dacor to anyone. In fact, I would recommend that they not purchase any Dacor product that does not have a full multi-year warranty.

We remodeled our kitchen 2 years ago but didnt upgrade our refrigerator because our old one was still working. My wife and I always wanted a Dacor refrigerator. We like their design. Our old refrigerator finally died after a little a year after our reno. We were sad but happy at the same time because we can finally go buy a Dacor fridge weve always wanted. We shopped around and compared Dacor, Sub-Zero, and Thermador just to make sure Dacor is for sure what we wanted. We chose Dacor and we couldnt be happier. Its been almost a year and we still love our Dacor fridge. Now we will just have to wait until our oven dies to get a matching Dacor one.

We purchased our range (Dacor Dual Fuel Range RSD30) in about 1997 thinking we had a good investment. We have replaced the bezel 5 times (the area that encloses the control area). Today the door glass has cracked. Whooppee! Merry Christmas! Each time I called about the bezel, I was told that they had a design flaw. The last time we had to replace the bezel and also pay for installation ourselves. We decided if this happened again, we would get rid of it. Well, it will be sooner than later as the oven glass has cracked. Needless to say, we are not return customers.

I have owned a Dacor dual fuel 6-burner range for several years. I paid approximately $5,000 for the product. It has proven to be totally unsatisfactory. The gas burners click and make noise whenever you try to turn the burners down to a low temperature. The cook top is very hard to clean. The range is a constant problem. It smells bad, does not heat up promptly, and the broiler feature is always a problem. A gas oven is supposed to heat to and keep a constant temperature - the Dacor does not. The broiler will not cook food evenly or well. The door to the oven will not close properly and is constantly partially open. The hinges do not seem to work properly.Most importantly, I have tried on many occasions to get Dacor to do something about the defective product. They have been totally non-responsive. When I did finally get somebody to come and look at it, they spent about 2 hours cleaning it, accused me of using the wrong cleaner on the cooktop, and presented me with a bill for $800. I asked if they would just give me my money back and take the defective product with them. DONT BUY DACOR.

I purchased a Dacor Black Dual Fuel Range (RSD30B) in 2001 which was installed during a kitchen remodel. We moved back into the house on 12/24/01. We hardly ever use the oven because my husband barbeques every night. In less than 5 years, a piece of the plastic front control panel fell off. In early 2008 the self cleaning function broke (error F2). I called Dacor and they referred me to a repair service. It was going to cost almost $500 to repair so, given that we use the oven so little, I decided not to spend the money on an oven that was falling apart. Now within the last two years the plastic control panel is cracked across the front and more pieces are starting to fall off. Now the clock and the timer have stopped working. I called Dacor again today and was told that the seals and hinges on the oven are probably bad, which is contributing to the problem. The customer service person was rude and unhelpful. He said it was not unusual for a ten year old oven to break. He gave me contact information for a parts dealer and two repair services. I bought this oven believing it was a high quality and I expected them to stand behind their product. What can you do to help me?

We had problems with it all the time. The front plastic cracked and ended up causing the oven not to work. We have spent (over the past 9 years) about $1,000 on repairs. Now, we just had it fixed and our new clock that was installed into the oven is running fast. After just being fixed, it takes 20 minutes to heat up to 400. Honestly, it always has been that way. We’re not happy with it at all. We bought a Sears brand oven for our church, and it works great, and the cost was only a third of what we paid for the Dacor oven. The Sears brand bakes just as good as the Dacor (when it works). I think it was a waste of money to buy this Dacor oven.

This range was installed in January 2003. The door on the larger oven was replaced soon after because it would not close tightly and still doesnt with the new door. I have always thought that the oven temperature is lower than it should be but have been told twice that it is accurate, tell that to the turkey. The heating element on the large oven was replaced 2 years ago. Four of the burners dont light and have to be lit manually, this has been going on for 10 years. The relay board has burned out and now has to be replaced, $800.00 fix. The technician just left and could not replace it, he couldnt access the tight spot that it was in and wanted to cut the barrier panel to get access to it. He decided not to do the job and told me to call Dacor to get another repair service, which I just did. I was prompted to write this after reading other reviews and remarks. I hope this helps someone out there to buy a different brand.

I have had nothing but trouble with a wall oven I bought in 2010. Basically just bad electronics. I finally replaced the oven in 2014 and had to get another Dacor to fit the opening. The new unit still does not heat evenly and is consistently off by about 50 degrees. Customer service is not helpful at all. Local repair shops cant really fix issues. Terrible company. Cant figure out how they stay in business.

Ive had this range for two years and am replacing the control panel for the second time. 1st time during product warranty and second time out of warranty. The range is beautiful but apparently the electronics are bad. And to add insult to injury Dacor doesnt stock replacements but has them assembled when needed. Estimated wait time for a new panel is 3 weeks; so no oven for 3 weeks and now not a lot of faith that the new board will be any better than the last one.

For the second time in 7 years our Dacor ERD 48 Range has failed us. Just in time for our New Years Day dinner. Neither of the two ovens will heat. We are now encountering the exact same problem. We spent $1000 the first time replacing the board. We cannot afford to do it twice.

When I bought my house, the previous owners told me that theyd been having problems with the Dacor oven. They had purchased a replacement burner and prepaid the Dacor authorized service technician to install it for us. We have worked for three years now to get Dacors authorized service representative to install the part for which he has already been paid, and have been using a toaster oven to prepare meals for a family of four the entire time. The oven will heat to 135 degrees, then either shut off completely or immediately switch to broiling mode and burn whatever is inside it. When I called Dacor to see if they could help with the service issue since the technician was authorized by them, they told me it was my problem, not theirs. Although if the product they manufactured wasnt faulty in the first place, it wouldnt be anyones problem!

We have a Dacor Epicure 36 six burner range. It has been a regular source of trouble since it was installed as part of a kitchen remodel in 2006. The igniter for the broiler went out 18-24 months after we got the oven. A year or so after that the weld that holds the bottom oven rack bracket to the oven itself popped loose making it impossible to use the lowest rack position in the oven. Last year the circuit board that controls, among other things, turning the bottom oven element on stopped working. Not only is the board itself quite expensive, but it is buried deep under the top of the stove taking lots of expensive hours of repair time to remove and replace. And now the burner igniters have begun to over spark (e.g., continue to click long after the burner has been lit, burners sparking that have not been turned on). The repairman tells me that is a different circuit board so we could be heading to another $500 or so in repair bills or perhaps a trip to the dump and a much cheaper replacement range. We have had other Dacor equipment (cooktop, wall oven, warming drawer) and have not had a problem with any of them. But given our experience with the Epicure I cant imagine ever buying another.

This is our second Dacor wall oven. It is approximately 6 yrs old. December 22/14, I was cooking a Christmas turkey as per usual, and I noticed an odd smell about 40 mins. into cooking. Checking the turkey, the temp. was at 500 degrees and on broil. I burned holes in my oven mitts on the roaster taking it out. Even though I set the temp. at 325 convection roast, it reset itself to 500 broil. Nothing works except the clock. Called repair guy after the holidays. Said it is a control panel behind the keypad area. Ordered the part. Been waiting 4 months now for this part. Now, no Easter dinner either. After reading these complaints, I am worried that this part replacement may not be the end of it.

Dacor ERD30S06CHLP 30 Inch Epicure Series Freestanding Dual-Fuel - I am so dissatisfied with this product. We bought the first range in 2003 and were so excited to use it. We chose Dacor over Wolf. From the beginning we had issues with the oven. It cooked very unevenly and the door never closed properly. We had a service call and they basically told us that we got a lemon. They offered us a new range for $3.5K. We thought we got a lemon so we agreed and paid for a new one for $3.5k. We also purchased the extended warranty for $2.2K.0 This one was even worse.One time I opened the oven and it burned my eyelashes. I wrote and complained with a video of the explosion and had to pay for the service call. I wrote a review in the website and they deleted it. We now own a range that we have paid over $10K that bakes unevenly, electric element does not work in oven and have minor explosions from time to time with a door that does not close. We have a few friends who have asked us about our range and we always recommend against it. We are looking for a new range. I would not recommend this range. I thought we got a lemon. But it seems thats just the product.

I moved into a house that already had a Dacor unit in place. Within months, I discovered that I owned an oven that could be fixed by throwing the circuit breaker. Then, I learned about invisible hands that turned the 325 degree convection oven to a 500 degree broiler. The final act was having all three glass panes shatter and the control panel cracking as punishment for assuming that the oven cleaner on an expensive gourmet stove would function according to manufacturing standards. The repairman ordered replacement parts. He spoke with someone who was off shore so forget about Dacor being all American made. The wrong parts were sent. He has reordered. Meanwhile, I have been without an oven for two months. If this goes on, I am going to Home Depot and buying a Hotpoint or GE. It is the same price as replacement glass panels and the control panel.

I bought a Dacor appliance package for a new custom home which costs over $30K+. Every single piece of appliance is defective. I am OK as long as Dacor can fix or address the issues but it takes them several visits, put the appliance out of order and fixing it does not happen any earlier than 8-10 Weeks. Imagine you living with a fridge, microwave, range and oven for 10+ weeks. The column freezer stops making ice. I call for service and tech informs the lever was jam and he fixed it. Wait 48 hours.After 48 hours still no ice. Another call and after a wait of 3 weeks another visit and diagnose need new part. Wait for part 4+ weeks and another 3+ weeks for replacement. Fridge does not cool and maintains temp 45 degree+. Service tech showed up 3 times and promised it is fixed. Have thrown out thousands of dollars worth food. To date I dont have it fixed. Waiting for a part, tech not available scheduling issues etc. To date I have been out of fridge (8/12/2021) 9 weeks from I made the first call. Currently I have a tech scheduled for 9/1/21.This is not the end. Microwave will run normally and wont heat the food. After several phone call and waiting they figured the door pin was not connecting properly and need parts to fix. After 10+ MONTHS it looks like it is fixed. The range control panel is hanging from underneath and no one seems to care to fix it. Every time I call they tell me its normal. I believe Dacor has not QA/QC in place prior to shipping the appliances to customer. Worst experience ever. If you need more details do not hesitate to call me on **. I hope you run away from Dacor. Dont even consider this option. I have a track of all phone call and email and timeline with Dacor service. I am planning to file a lawsuit and recoup some of the costs and losses.

Do not buy a Dacor appliance unless youre okay with replacing parts for the oven in less than 2 years. The control electronic part was replace then less than a year later the user interface had to be replaced. Less than a year after the user interface was replaced, the oven completely stopped working. After calling the same repair guy to come fix it, they informed me that the company no longer sells the control interface. When I called the company, the only options they gave me were to send the part to a third party refurbish company and have them fix it. That means I would have to call the service repair company for the FOURTH time to have them remove the part, I would need to send it away to get fixed and call them back to put it back in. Dacor didnt even offer to pay for any of this. The customer service rep offered to give me a discount on a new unit. Are you kidding me?!? Please do yourself a favor and dont buy anything from this company. They dont back up their products and its clear they dont care about their reputation. Its a waste of money to be spend on high end appliances that are poorly made. Spend less from a different company thats been around for a long time. At least if a part goes, youll have reassurance they will have that part handy. A terrible company. I hope they go belly up soon so they can stop selling overly priced kitchen appliances to people.

Dacors wall oven wont heat up after I used Self Clean feature. Dacor said there is a reset button behind exhaust frame on oven (close to door latch). I called when I could not find red button and was told it was hard to find and they did not know exactly where it was located. Maybe I should call repairman. Any suggestions? Has anyone else had problems after cleaning oven? PS: My 5 year extended insurance expired Nov 11.

We purchased a Dacor oven stove top. It is about 10 yrs old now. 3 years ago we had a problem with the ignitor and had it repaired and paid over $200.00 for the repair. 3 Years later we are experiencing a similar problem with the ignitors clicking on and not turning off. I have called for repairs on this but expect this will cost me some more money. I have been online and have seen similar complaints leading to believe that this is a common problem and I would avoid purchasing Dacor ignitor products for the stove top, until resolved.

Dacor customer service contacted me and worked with me and the appliance repair company to get the proper parts to fix the oven. Everything is fine! We once again really love our Dacor wall oven.

My Epicure dishwasher is being replaced after 4 years of use. The racks are rusted. It leaks. And the spray arms are broken in two. The dishes need to be completely washed before putting in dishwasher. Do not purchase Dacor dishwasher.

We remodeled our kitchen because my wife is a chef. So we thought a full suite of Dacor products was just what she needed. What a mistake! Our $6000 36-inch dual-fuel range had problems from the start. We had to replace the control panel, heating element, convection fan, and door seal. Finally, the liner split and the range became unrepairable. We made the mistake of purchasing a simpler, gas-only range because Dacor offered a modest discount. This $7000 range lasted four months before a failure in the wiring harness made it unrepairable!! We bought a Miele replacement. We have had performance issues with our Dacor warming drawer and microwave. DO NOT BUY ANYTHING DACOR!!!

I have been getting the run around from Dacor regarding a part that I paid $700 to fix an interior light that comes on and off like a strobe light. After the local service company installed the part, recommended as the fix by Dacor, the issue returned. I contacted the technician again and that is when the run around started by Dacor. I was told to contact the customer service line and tell my story which I did, only to be told that the Range is too old and they dont stand behind the warranty nor service anymore. They said beyond 5 years they dont do anything for the customer.I paid $8000 for this range back in 2005 and it has worked just great until this recent issue. If I had known that there was no service nor any parts for the fix I would have just dismantled the interior light. But why did they recommend the part I did purchase to begin with? Are they just trying to increase revenues by advising customers to buy parts that wont work? DO NOT BUY DACOR PRODUCTS UNLESS YOU WANT TO BE ON THE HOOK FOR REPAIRS AFTER ONLY 5 YEARS! This company has rude customer service agents and they do not stand behind their name!

This is the second time I have purchased these appliances and unfortunately each one has been a great disappointment. I have spent enough in repair bills to almost purchase a warming drawer. Each one shuts down when the self clean button is turned on, and then I have to call a repairman out to recalibrate the oven to work each time I try to use the self clean. I was told by the last repairman that the life of the oven is greatly shortened if you the self clean mode. If this is the case, either fix it or take out this mode. After I had the oven about a year the oven door glass blew out, and this had to be replaced. The temperature in the oven is very unreliable in different areas of the oven and browns more on one side than the other... For the high end cost of these ovens, I would just as soon have a basic oven that works and does not go out every few months. What a waste of money I consider Dacor to be, and will never recommend it to anyone I know. I am in the personal shopping business and have my own company, but will tell my clients to be very aware of the high cost/low performance of Dacor products... On a scale of 1 to 10, Dacor gets a 1.

I had an issue with the wall oven light on my Dacor Preference double oven. To make a long story short, after contacting Dacor directly, they made sure that the unit was fixed by providing the part directly to me and confirming that the local repair company would be willing to install it. The oven is 8 years old and in the end, what I spent seemed reasonable to get a fully functioning oven (membrane switch). They were prompt, personal and courteous in their response to me. I came away feeling that Dacor takes pride in their history and their products! They also cleared up some misconceptions that I had regarding the status of their company. Although it was frustrating to have an appliance not work properly, I feel that the customer service Dacor provides makes their company one worth sticking with. That makes a big difference in todays impersonal world.

We purchased this oven/cooktop was installed in February 2020. I have been unhappy with the performance of the smaller oven from the beginning. It takes 20 minutes to pre-heat, a loud fan starts to run partway during the pre-heating process and then warm air starts to flow out the bottom. Plus, it is not either holding the correct temperature or not reaching it completely, nothing I cook in there is done in a appropriate amount of time. Baking a small potato takes an hour and a half at 375, brownies take almost twice the approximate baking time. My attempts to contact them have been less than satisfactory. I wrote for a second time over two weeks ago providing a copy of the invoice and have still heard nothing. I am quite disappointed with this product & company.

When I pay top-dollars for a supposedly high-end product, I would expect performance and durability. That is not the case with Dacor. This manufacturer charges top-dollars for their appliances but their products do not live up to expectations. I purchased a Dacor gas cooktop range, and within a year several blue-indicator lights on the knobs (which indicate the gas is on) failed. At that time it was covered under warranty, and even then it was a hassle to get the repair technician to come out and take the range out to get to the electronic parts. After replacing two of the lights, the other lights failed as well, and then the replaced lights eventually went out. Now, only one out of the five lights work. After a year, the appliance is no longer under warranty, and it is too expensive to get it serviced. Its not only a cosmetic issue, but a safety one as well.Were in the market for a single wall-oven, and I considered a Dacor for its clean and stylish design. However, after reading the reviews about Dacor, Im veering away from this company. Sadly, as much as I want to support a Made in America company, the pride of workmanship and customer service doesnt live up to this companys branding.

Years ago I purchased the Dacor Double Oven over a Thermador because the Thermador had a ridiculously long pre-heat time. The Dacor has performed reasonably well as a oven particularly in convection-bake mode. But over time, components started failing and repair parts were hard to find, unavailable or ridiculously overpriced. I am an an engineer with DIY skills honed from years working with high tech food manufacturing equipment and controls including ovens. In recent years, I have needed to replace a relay board, the main control board, hinges two times, and most recently the hinge receptacles. I have also replaced an inner panel on a door assembly. Just think what such repairs would have cost for an average consumer. I understand the parts can fail, but Dacor has shown little regard for consumers in my opinion. They have done very little to maintain an inventory of repair parts. Basically their message is that the part is now obsolete and unavailable. Thats some answer when the price of a new double oven is multiple thousands. Recently, the hinges on my upper oven failed again. As they failed, their failure caused increased wear on the hinge receptacles. Soon the receptacles failed as well. I was able to find hinges at a ridiculously high price but the receptacles were unavailable anywhere. I contacted a several parts suppliers who told me that they had no idea when the parts would be available. Moreover at least two of the suppliers mentioned that they had a backlog of orders for the receptacles - one had a backlog of over thirty. Yikes!. At that point I contacted Dacor customer service and asked what could I do to get the part. Answer: The part is unavailable and we have no estimate on when it will be available. I tried to escalate my request and got nowhere. Finally after many hours of online searching, I found one set of the hinge receptacles at a price 4X last years price. Lastly as I replaced the receptacles today, I realized that the mounting screws only hold one portion of the U shaped mount. If the screws were longer, the receptacle would be less prone to twisting and wear. Be aware that Dacor was sold to Samsung a few years back. Based on my experience, I could never recommend Dacor. Caveat Emptor!

We purchased the Dacor refrigerator on 11/19/2018. Wasnt delivered until 12/17/2018. Freezer failed on 1/15/2019, had a repair on 1/30/2019 and on 1/31/2019 the entire unit failed. Dacor customer service is awful. Product is awful.

I purchased entire kitchen of Dacor appliances - $30,000. The 48 refrigerator required 9 service calls to stop freeze up. Wall oven – the digital panel went bad. Stove top exhaust – the circuit is melting. The dishwasher had 17 service calls over 2 years - mid way they replaced the unit because they could not stop it from leaking and damaging our wood floors. The most recent service call was yesterday, 12/20/2011. After waiting since November, it is again not working. Does anyone else understand that spending $1700 on a dishwasher should allow you to use the dishwasher? I called the customer service and was told We are discussing the situation and will get back to you. Are you going to come wash dishes with me over Christmas when we have 25 guests? Were you there on Thanksgiving? If I hadnt been stupid enough to buy all Dacor appliances, I would throw it in the dumpster and buy a GE from Home Depot.

Don’t purchase Dacor appliance - it’s been worst purchase experience ever and I am extremely disappointed. After six months since I purchased the Dacor built-in refrigerator, Dacor couldn’t even ship the proper installation parts and my refrigerator is still not working. Problems:1. Their high end $11K Dacor built-in refrigerator cannot even be installed. Wasted five months communicating with both Dacor and the retailer AppliancesConnection. After five months they were still able to ship the proper missing installation parts. Over the past five months, I talked to six different team members in Dacor customer support team, escalated to customer support lead and also talked to their regional technical manager, none of them is able to solve my problem and ship the right installation parts.a) Their process is extremely messy. Their customer support team had no idea about installation requirement of the refrigerator. And the request from their customer support team is declined by their internal Parts department again and again, only to find out installation parts should’ve shipped by the retailer. This is extremely confusing now and no one in the team seems to understand the right process.b) After Dacor acquired by Samsung, their manufacturing process is very messy and parts are extremely confusing. There’s one version of required installation parts in Dacor manual and one version of Samsung parts in the Parts guide, and no one in the team seems to understand the difference and how to map from one to another (they insist on sending me Samsung parts instead, claiming they’re compatible). I am now the expert myself to understand all their parts and able to identify many problems in their manual.2. As a high end brand, Dacor doesn’t seem to care about their customer at all. As a customer who did kitchen remodeling and had no refrigerator to use for five months, no one in the team seems to care about their brand or their customers. With this huge gap in the process, no one thinks about the problem from their customer’s perspective or shared empathy with me. Dacor as a brand is really bad and I am extremely disappointed in both their product and services.

We purchased Dacor appliances twice, (double ovens, warming drawer and gas cooktop), after our first flood, and then again, after we flooded from Hurricane Harvey. (Dacors customer service was excellent in helping us replace all our appliances when we were going through such a horrific disaster because the vendor we purchased our appliance from the first time, wasnt in business anymore.) We were very satisfied with our appliances the first time we remodeled, that we purchased them again, and have not had any problems. The ovens heat up quicker than other high-end ovens and the range top cooks evenly and looks beautiful. I would purchase again, but hopefully, I wont have to.

We purchased our fridge for $9,249 in September of 2016. By the beginning February of 2019 the fridge stopped working completely, I called Dacor who sent out a technician to determine the problem. The technician said the compressor had failed and needed to be replaced. A week later we found out that Dacor no longer makes the particular compressor I need. I have now been living without a fridge for 3 weeks and Dacor doesn’t seem to care at all. We have 3 children and are currently living out of a cooler with ice. I call them and email them every day begging them for a resolution. They are a avoiding me. I believe they owe me a new fridge and they don’t want to do it. We saved long and hard for our expensive appliances and it’s absolutely heartbreaking to have this useless fridge stop working after 2 years, and Dacor seems to not care.

We have a 2 year old 36 inch, Model EF361WF refrigerator. Water began pooling at the base every 2-3 days. Called Dacor Customer Service Team. Pitiful response and horrible customer service. Had to call private technician who was very surprised that a so-called higher end appliance was not factory-fitted with a P trap. He sees the problem often with cheaper models. Dacor has let us down twice. Buyer beware: sub-standard products matched with sub-standard customer service. Dacor will never get our business again and we would recommend all potential purchasers to consider other brands.

We purchased this oven February 2009. On 6/7/11, we had to replace the touch pad assembly. On 12/16/13, we again had to replace the touch pad assembly with a cost of repair to this point of over $900.00. The over cost $2,395.00 when purchased. On 3/16/14, while on convection/bake the oven switched over to broil. On 3/20/14, a repairman came to the house. The condition did not replicate but the repairman, in conversation with Dacor, determined that the fix, if this should happen again, would require the replacement of the relay board and ERC control at a cost of $700.00. On 3/27/14, while on convection/bake, the oven switched over to broil. I called Dacor and was forced to leave a message.

I was a bit anxious when I purchased my Dacor range because I really didn’t know how it would perform. A year later and I couldn’t be happier. I love my Dacor 30” range. It has been one of the best purchases ever.

We used a new Dacor range vent only to have it go on and off. We called Dacor and they referred us to Desert Tech in La Quinta. The owner came out and said we needed a new unit for $775. We said just unplug it. He charged us $275 even though it took him less than 30 minutes. Stay away from Dacor AND Desert Tech!

We remodeled our kitchen in 2002 and chose the Dacor 36 dual-fuel range. I was preparing a pork roast for a dinner party with the oven on Bake. The roast was just not coming up to temperature, though the display indicated that the oven was at the temperature I set. I wound up slicing the roast and cooking it on the griddle; my hungry guests were getting restless. Then I tracked the oven heat for an entire day with an oven thermometer. The oven would come up to temperature and then cool off. I sent these numbers to Dacor and asked customer service for an explanation. Believe it or not, the conversation was--Dacor: The temperature is going down because the fan is coming on. Youre not supposed to use the Bake setting, but only the Convection Bake or Pure Convection. Me: Why is the Bake button there, then? Dacor: Were taking it out in the next production run. (This hasnt happened. My sister-in-law bought a Dacor last year before I could warn her and the button is still there.) Also, after using the self-clean one time, I noticed a crack on the inside of the oven door, starting in the corner of the window. The inside of the window is now permanently spotted with baked-on grease. Now my oven does not work at all. The repairman says that the circuit board needs to be replaced, and if Im lucky, it will work for a couple of years. The repair will cost around $700 including labor. The repairman told me that some repairmen in our area will not even work on Dacors because there are so many problems. Im considering replacing the stove... a very expensive mistake. Beware of Dacor products.

We purchased a Dacor Oven model # ECS 136544 in 2009. Within two years, the relay board and thermostat in addition to an LED bulb required replacement. A year later, the broiler heating element and the second LED light required replacement. Dacors response (800-793-0093) was read your explicit warranty and the implied warranty under Section 2-314 of the Uniform Commercial Code isnt applicable. The total expense for repairs is over $1,000. Did we get a lemon, or are Dacor ovens prone to failure? Should we have been thinking Wolf?

Front bevel of my first rsd30 range purchased in California in 1999 cracked within nine months. Dacor said it was a defect in the design and would fix it for free. I sold the house in 2001 but the range was still not fixed. I moved to Nevada and bought a new rsd30 range and same thing happened within six months. It took a year to get it fixed at their expense. This bevel also cracked again for the second time in March 2011. Their response to this was to offer me a new bevel for $180 and I would have to pay for the installation. I declined the offer. The bevel is still cracked at this time. At the same time, I bought a PMOR30 over the range microwave and the front handle broke at least four times. And finally, the whole thing broke down and was not repairable. In Aug. 2008, I contacted Dacor and they agreed to replace it with a new DMT2420 over the counter microwave for half the price ($390). Last week, this one blew up on me. Sparks were coming out through the side and a big hole in the removable shield and burn damage to the wall of the unit. I do not believe this unit is repairable. I contacted Michael at Dacor. He apologized and said that theres nothing they can do about it as it is out of warranty but they will look into it. What I want at this point is my money back that I paid for ($390) and for them to pick up the unit and get it out of my house. I will never buy another Dacor product again.

I purchased my Dacor Distinctive #DT0127 wall oven in 2015 and have been very pleased with the product to date. However after running a self-clean cycle the oven does not work which was a surprise given the fact that I had previously done self-cleans before without any problems. I immediately contacted Dacor customer service who were amazing! The CSR that I spoke with kindly extended my warranty until 2018 even though I had not registered my oven with them upon purchasing it. He also arranged a service call for me that would be covered under the extended warranty. I am very impressed with the companys attention to service as I really love my oven. Even though I experienced this issue I would still recommend this product.

Purchased Dacor Induction Range w Convection Oven RR30NIS-C in October 2013 and LOVE this range. Accidentally broke the glass on the induction cooktop with falling object mid-March 2020. Only the glass is broken, and all other electronics, induction burners, oven, etc are functioning fine. Called Dacor support to acquire part number for a glass top for repair - obtained part number #701751 superseded by #702285, BUT was informed that the part had been discontinued and is no longer being manufactured or kept in stock. No other advice was given other than to discard the entire $6000 range. Multiple phone calls with service.I asked for a listing of third party part distributors and was referred to four distributors on the Dacor public website and given no other info. I called all web-based third-party distributors I could find in USA and Canada to see if anyone had the part in stock, with no luck. I contacted two technicians to see if they would be able to obtain the part through their channels, with no luck. I am an engineer, so I spent some time pouring over technical manuals trying to find a solution to replace the entire induction range cooktop assembly (top part of the range) with a later model, and although its possible, Dacor would not provide the ability to purchase an RNR30NI range cooktop assembly that could be fit into the existing housing on top of the range. The convection oven is completely fine, and I cannot believe that Dacor has given me no other option but to pitch a six-year-old $6000 range because they stopped manufacturing one fragile part made of glass. I would imagine that many consumers may be in the same position as I, as these cooktops are breakable, and accidents happen. I have reached out to Dacor support desk numerous times without resolution, and I am at my wits end with a $6000 boat anchor in my kitchen. What a waste of money! Poorly done Dacor!I would like Dacor to provide me with some sort of solution whether it be the part required to fix my induction cooktop, or a replacement Induction Range with convection oven, or reimbursement of the purchase price so I can obtain a replacement on my own. If I am not able to find a solution to repair my range, I will never buy from Dacor again! Dacor will discontinue easily broken parts without warning! You may spend thousands of dollars and not be able to repair your appliance after warranty expires!

I have an Dacor column fridge and after 18 mths (under warrant), its not cooling. Its been 3 weeks, 2 repair visits and Im still out of fridge. Repair person said this is a known issue. If this is the case, Dacor should be proactive and reaching out to consumers under warranty to get this fixed instead of waiting for complaints. Interior trim kit is not included in purchase price which is ridiculous for the price of this fridge. Would not recommend!

I have a Dacor 27 inch wall (model EOR) oven which I bought 2 years ago, along with a micro and a warming drawer. Since then, the control panel has been replaced twice. Both times because, after using the timer mode, the beeper would come on at all hours of the day and night. In both instances, I had to cut the power to the oven until the replacement part arrived. I am presently waiting for the third panel to arrive. Today I needed to bake something, so I turned the power to the oven back on. Now it will only function at 350 degrees and only in the bake mode. No other numbers can be put in and nothing happens when I select convection. So far Dacor has absorbed the cost of the parts and repairs, but that does not mitigate the hassle of having to wait upwards of 2 months for a part each time this happens.

Previously, I submitted a complaint here and I would now like to amend it. The problem(s) that I experienced with my 8 years old Dacor 30-inch wall oven was what I described in my earlier post (July 9, 2012). But after posting here, I was contacted by a Dacor representative not once, but several follow-ups to ensure that the problem was resolved to my satisfaction. It was and Im now very impressed with Dacors customer support. To be fair, I should have contacted Dacor with my problem before blasting their product here.It has been a good oven for 8 years and given their support that Ive recently experienced, Id be more inclined to purchase Dacor products in the future as it appears theyre willing to stand behind what they sell. Im really glad this issue was resolved because I was about to throw in the towel and buy something else, but couldnt find anything else that looked near as good as my Dacor and had glowing product performance reviews.

I am amazed by the sleek look and design of the new Modernist refrigeration Dacor has to offer. The built in column pairing is my favorite with all stainless steel interior, tempered glass, and LED lighting that WOWs anyone who opens the door. The water dispenser is flush against the interior wall of the refrigerator and the freezer can offer two ice makers, one for regular ice and one for your high end cocktail drinks. These units are PURE LUXURY and HIGHLY RECOMMENDED!

I purchased a 30 Dacor dual fuel range and matching hood in 2004. I paid $4009 for the range and $948 for the hood. The range and hood have been nothing but problems. I wrote to Dacor in April 2009 detailing the problems with the range with service history dating back to 2006. Problems include overheating when cleaning which is a safety risk, replacement of cooling fan, ignitor assay, part # 92309 membrane, and replacement of relay board in 2007, 2009 and again December of 2011. I attempted to purchase a Dacor extended service agreement in January 2009 but was declined due to the ranges past history and its age. I recently found this site which indicates that other consumers have had similar problems with Dacor products. Dacor has lost me as a customer as I will never buy another Dacor product! I have been disappointed and frustrated with their lack of response and support. I finally purchased a GE service contract which has helped absorb some of the cost of ongoing repairs. The overhead lighting has long since gone out in the hood. I was told the hood needs to be disassembled to replace the lights. Dacor should step up and support its products. When most people put out $4000 for a range, they expect to get a quality product that will last 15-20 years. With Dacor, this has definitely not been the case!

Worst oven Ive ever purchased by far. Pay big bucks and get junk. About 2 times per month, the oven will not heat up. I cant count the amount of wasted food and dinners out, because it does not seem to ignite, only warm up to about 100 degrees. I contact the appliance repair company and it works when they come out, so they dont do anything. I will never, ever buy another appliance from this brand.

My Dacor (3 years old) oven top burners igniters dont stop after being turned on, although they are burning. Ive tried drying them for many hours and applying rubbing alcohol. The front ones do this all the time when we turn them on. When we turn the left front burner on, the front right ones igniter does it along with the left! The back ones do it occasionally, so are still usable. Apparently this is a common problem with Dacor units. Why havent they fixed it? Weve had them fix the electronic panel at huge expense, and are not going to call them again. When the back burners stop working, well get another unit. Ive had gas stoves for 30 years and have never experienced anything like this poor quality. Its amazing that they are still in business.

Purchased a house with Dacor 2 Built in 30refrigerators that suppose to be under additional 1 year warranty after 2 year initial warranty expires, Both units were registered online and still showing being under warranty and the company refuse to take care of the issue. This is not how you treat customers and it tells that it does not matter if you buy $8000 refrigerator, you as a customer does not really matter. I am in the process of building another house right now and I was considering spending over $40,000 on Dacor appliances and that will definitely not happen since the company refuses to honor the warranty that is still active over broken door spring. What a shame!

Updated on 06/14/2021: We placed a review about a month ago about a defective range. The company contacted us, took some information, but we have not heard from them since. It seems they just wanted an appearance of willingness to help but do not intend to help. After spending almost $4000 on a stove you would think it would last more than a few years before the motherboard malfunctioned. Dacor has provided no help. Very poor customer service and an extreme disappointment.Original Review: We bought our Dacor range for 3800$ in 2017. The self clean function did not work due to a defective locking mechanism. We had that repaired. Starting in 2019, the bake cycle was not heating up to set temperature. We followed recalibrate instructions. Then, the temperature went over the desired setting. I’ve tried adjusting baking times to deal with the problem. Convection bake started having temperatures above the set temperature.Several months ago we called for repair. The service technician tested the sensor and said it was fine. He stated that it was the motherboard which would cost $1200 to replace with parts and labor. That’s a lot of money to put into a high end stove that cost $3800 to begin with and is only 3 years old! We’ve had Frigidaire stoves that lasted 15+ years. This continues to be a problem. Unfortunately, we may have to replace this stove with Viking or Wolf. This is totally unacceptable considering the initial cost of the stove and the fact that Dacor markets their products to be long lasting and reliable. Never will I buy Dacor products again.

We replaced a Dacor with this new upgraded Dacor. I accidentally started a fire in the last one...my fault not the units. Ours fits very snuggly into the wall which was the primary reason we went for the Dacor brand. Other than having to take off the little rubber pads/feet, it slid right in and we were back in business.

We remodeled our kitchen and decided to use the range as the focal point of the room. The decision to go with a Dacor ER36DSCH dual fuel range over comparable Wolf and Viking models as well as a Dacor heating drawer was made, a decision I have regretted since. Our unit keeps blowing the baking element ($200) which routinely fails at the most inopportune times. To date I have replaced four and the Mrs. recently informed me that the oven is once again not heating properly. Thankfully, I am competent enough to diagnosis and repair it myself and did a thorough operational inspection and cleaning which revealed the broil element ($180) had also gone bad this time. My wife hates this oven and unfortunately it sits right smack in the middle of our beautiful kitchen to remind us of the bad decision we made. In fact, we are now at the point where we are considering replacing it and sending it to a scrap yard where it belongs. Avoid this brand or it will cost you.

The enamel on the bottom of the top oven has blistered and the metal beneath is exposed. If the oven is heated, there is a chemical smell. This is such a dangerous situation that the ovens (double) are being removed as I write and will be replaced with a different and more reliable brand.

We purchased the modernist collections 48” range, refrigerator and freezer, oven and microwave combo and dishwasher with a kitchen remodel 9 months ago. We had one issue with the dishwasher which was resolved, then another when is stopped mid-cycle. Repairman came out and was told we needed a new panel. Found out it was back-ordered. Well, it’s now been FOUR month without a dishwasher. We have contacted customer service and asked for other options and were told there was nothing they could do! When following up we have left messages and had our calls not returned, as has our service company. I have waited on the phone 3 times 30 minutes to talk to someone, because they won’t call back. We’ve asked to talk to a supervisor, and was told our information would be forwarded... 2 days later, no call. This is by far the WORST service I have ever had for ANY type of product.

We did a complete kitchen remodel in 2007. I wanted top of the line appliances, and I liked the look of Dacor. I spent over $10,000 on a refrigerator, oversize dishwasher, microwave oven and a warming oven... (I know). Within 16 months, everything started to fall apart. Of course it was over the one year’s mark so there was no replacing of the units on the manufacturers part. I have since replaced the motherboard on the dishwasher twice... total of 3K in repairs! I cant replace the dishwasher because it was oversized and we built our cabinets around it and no other company sell an oversized dishwasher. I have replaced the microwave oven with another one that looks just like it because for some reason it fried. The refrigerator constantly rattles and my husband and I are at our wits end because of it. The only thing that hasnt fell apart yet is the warming oven. Probably because we dont use it. I wouldnt recommend it to anyone. Its a total waste of money. Next time Im buying Kenmore. My old Kenmore is sitting out in the garage being a good and faithful second fridge.

We purchased this unit 7 years ago, just a family of two with visiting grandchildren. Unit came, had a crooked door and a bent latch, which we had serviced and supposedly corrected. When self cleaning the latch still made grinding noises. Over a year ago the oven stopped working period. A December service call said needs a new latch, sensor and display -we are now in 4 figures($). Oven operates for month and a half. January 2019 Service call now new door latch, relay board and main wire harness 4 figures again double! Oven stops working yesterday (June). Service call today new latch, motherboard and something else and another 4 figure repair cost. Same repair parts same problem! Patience is a virtue, but repair costs are sinful! Next step, Boat Anchor! Problem from the beginning and still a problem now.

We purchased this high end Dacor range (Dacor Renaissance ER30G) new in 2011 from the Appliance Loft here in Cincinnati. It was dropped off and installed and would not operate right out of the box. A repair was made and everything worked (unless you count the indicator lights on the knobs, they all went out after approx 14 months). This past November the oven went dead. A1 appliance came out: Determined new control board needed, ordered and installed. Thanksgiving Day, oven dead. A1 comes back, reset the High Temp Fuse. Oven dead 4 days later, A1 returns with a new HTF. Dec 22, Oven dead. As soon as The holiday is over we will call another repair shop and start looking at replacing this unreliable piece of eye candy. Open comment to Dacors design engineers, quality control engineers and management. You should be totally ashamed about this product youve designed. You are supposed to represent the best in American design and quality and this falls below that of low end appliances out of China. See you in small claims court.

We did a complete kitchen remodel 2 years ago. My husband talked me into purchasing american made over the Bosch products that I preferred. This has been a horrible experience. The dishwasher does not clean. I was told to prime the water and purchase the higher end platinum packs. That did not work, then it was add lemi shine. That has not worked. The water never completely drains, ugh old water. A service tech could not tell me where the rinse aid indicator light was and insisted mine did not come with one! Microwave does not heat in an adequate time. All listed times I have to double time if not more. I was told to put a Rubbermaid container over the food product to insulate the waves... ha! Oven does not regulate heat. when I go to increase the heat during stated recipe, the screen always say 50 even though I would have it at 375. I was told it always will revert back to 350, really. I had all Kenmore appliances prior to the Dacor and never had a problem... Do not buy, I wish I hadnt. We are filing this with BBB and headed to small claims court.. This should be fun. I hope Dacor sees this.

I would never buy another Dacor product. The microwave totally crashed and now the oven will not heat. I have had contact in the past regarding repairs and they are outrageous. I plan to replace both items rather than paying unreasonable costs. Very unhappy.

48 in. Range - Wish I had read reviews first would NEVER have purchased Dacor. Paid almost 11,000.00 for a range so many issues they replaced it. New range came with 7 defects. It has been over a month and nothing has been done about it. Everyone keeps passing the buck and I am sitting with an high end expensive product and no help from Dacor. I am being very patient but also very frustrated at this point.

In 2001, I bought a Dacor dual range stove. I paid over $2000. My problem is that there is a defect in the product; when you use the self-cleaning, the outside of the stove cracks up. Dacor has replaced this three times and each time it cracks again. I spoke with them about a year ago and because I didnt continue the warranty, they wouldnt replace it. I carry a home warranty.My stove looks like it came from the junkyard. I understand them not repairing a physical problem with the stove but the outside is crumbling because of a defect in their product. If you dont clean the oven, then you get an error and the only way to get it off is to clean but all that dose causes the outside to crack up more. It pains me to think of buying a new range when I thought I had done my homework, when I choose Dacor. I hope this isnt too late, but it pains me to think after another cleaning I may be forced to buy another stove.

When our installer removed the packing material, he saw that the oven glass was shattered. Dacor said they would fix it, but wouldnt tell me how. I had to call the local repair shop to see what parts were being shipped. Only the glass! Not even the whole door. The idea that they would take apart and reassemble a brand new oven and consider that acceptable service makes me angry. This is supposed to be a high end company. I responded that this was unacceptable since the oven had obviously been dropped (shatter pattern spreads from the lower right corner of the glass) and might be a safety hazard. No response yet. Ill update this if/when I get a response.

We acquired a $7,500 Dacor refrigerator when we bought a house this year. The fridge was only 5 years old. First of all it made horrendous noise when operating. Secondly the ice maker didnt work. Thirdly the freezer cooling unit died last week. How can a $7,500 refrigerator be designed so badly? I found out through Dacors authorized service company that it was quite likely the freezer could be fixed with a $400 part and some $250 in labor. The technician hinted that this problem was quite common with Dacor refrigerators. I contacted Dacor and suggested that their Internet reviews were terrible and they should help defray the costs of their premature failed unit. I was thinking that for a 5 year old product they should reimburse 50-75% of the total cost to repair. They said they would give me a 25% discount on the retail value of the parts only. In other words - I would be on the hook for at least $600 of the estimated $700 fix. This was a slap in the face. They dont seem to realize that their companys future business is only built on satisfied customers. I cant believe such expensive equipment can be so poorly designed and supported. Mercedes Benz... they are not. Lest anyone think that I am a frothing upset complaining consumer - I will tell you that I am currently retired, and formerly CEO of a $200 million public software company. I know something about building a business and I know something about focusing on customer satisfaction. I would urge anyone reading this review to stay away from all Dacor products. The Company has shown itself to be undeserving of any American consumers business!

About a month ago then again 2 weeks ago, I would hear a beep (not while I was cooking) from the stove. I went over and all elements had turned themselves on at HIGH. The only way I could turn them off is to repeatedly push and hold the child safety button. Very scary! If I had left a pot or pan on the range top, who knows what would have happened. It did it occasionally with 1 burner twice more. Yesterday, the range top started cycling every 90 seconds, on then off, then on, then off. I shut it off at the circuit breaker twice thinking this is a way to reset electronics sometimes. Once for 2 minutes then again overnight.I tried cooking on it this morning: on and off and on and off again. It is shut off at the circuit breaker awaiting repairs. I am a renter so am spared the repair bill but not being able to cook (of course it happened on Easter weekend!!) is a major pain. It is 10 years old this week the landlord told me, but I used to cook on a stove that was 60 years old and it worked like a champ.

When I completely remodeled my kitchen 6 years ago, I actually went AGAINST the advice of my appliance dealer and kitchen designer and insisted on buying the Dacor 30 double convection wall oven. Id been longing for Dacor ovens for years and though they gently tried to steer me towards Miele or Electrolux, I dug in my heels. Ive regretted ever since. Since first use, my electronic display has not been without an error message. Every time I go to turn on the oven, theres a message telling me to clean the convection fan filter. I called Dacor and they told me to ignore it! It was a mistaken message. Still, I cleaned them repeatedly to no avail. The main electronic circuit board on the oven has gone out three times. They paid for it the first time because it was under warranty. The second time they sold me the part at a discount but I had to pay for the service call. Total cost to me: $480. The third time, I had to pay for everything myself. Total cost to me: $870. They told me its because I broiled with the door open. I have NEVER broiled with the door open! The inside lights go on and off randomly. The temperature probe has NEVER worked properly. Last week, I was preheating the oven to bake some cookies and an alarm went off giving me a cooling fan error message. The oven turned off and I cant get it to turn back on. I called Dacor customer service twice so far and the first time they told me they would research the issue and call me back. They NEVER CALLED. I called again and they told me they could ship me the part and I could pay for the service call. The lower oven is currently working so I havent done anything yet, but the oven originally cost me well over $5,000. I have put another $1,300 into it. Im not about to spend another $500-$600 on this complete waste of money. Bottom Line: Dacor sells junk for exorbitant prices and refuses to stand behind their products. I was an idiot to fall for the Only True Convection Oven in the market line. Im buying a Miele or a GE to replace.

We purchased a Dacor induction range 5 years ago which cost $5000 plus installation parts and service costs totalling $10000. Two days ago, an error code showed up indicating that the generator needs replacement. I contacted Dacor who states that the part is discontinued but that I could contact a refurbishing company (Corecentric) to send my generator to for possible repair. A service technician would have to remove the generator, I would send the part to Corecentric, then IF they can repair it, the tech needs to reinstall it. There are no service providers that Dacor referred me to that will service a refurbished part. Even if I wanted to try, I as an owner, cannot remove it myself because Dacor does not provide the service manual to do so. I spoke to Dacor multiple times about this problem and management stated that since the product is so out of warranty that they cannot offer any other repair option, compensation, or replacement even if the part is deemed unrepairable by Corecentric. When you pay $10000 for a product I expect it to last more than five years and that a reputable company would stand by their product and service. Essentially, Dacor inferred that we are out of $10000 because a part that POSSIBLY can be refurbished for $215 plus service costs, cant get serviced and Dacor takes no further responsibility. I have heard stories from appliance providers and service providers that since Dacor joined Samsung, that their customer service is poor and products have become inferior.

I bought the refrigerator less than a year for over $4,000 and the vegetable drawer chipped. When I called Dacor, I was told that it was a cosmetic issue and was given a number to call and order the part. For a refrigerator less than a year and costing that much, I thought it should fall under its warranty. Another issue is the ice maker. It wont dispense ice and I have to always pull the ice bin and put it back in. The Dacor customer service said that its because air gets into the ice bin when I dispense ice and thats the solution. Once again, for such an expensive refrigerator under 1 year old, I would think customer service would be more customer oriented. Never again!

Perfect size burners and small oven. Cooks food perfectly about 25° less than you think. Great grill on top. Easy to clean.

I wrote yesterday, perhaps a little too hastily that our motherboard was dead on our Dacor stove. The repairman came today and fixed it by removing it from the front of the stove and unplugging two plugs and plugging them back in. Everything works fine now and we are vastly relieved. The repairman commented that most people are very happy with their Dacor appliances and he doesnt repair them very often.Total relief. Also hope this doesnt happen again because though extremely simple to repair, it would become very tiresome to remove the motherboard and fiddle with the sophisticated circuitry if we had to do it ourselves. I wasnt watching real closely what the guy did and dont know if I could do it myself.

I have a Dacor refrigerator that cools poorly and needs servicing. Refrigerator manufacture date March 2017. When I acquired the refrigerator I signed up for the Dacor standard warranty (1 year) and the Promotional additional 2-year Dacor standard warranty advertised as 3-For-Free warranty. I contacted Dacor customer support by phone today. After an hour on hold, they said that they would have to check with their supervisor. 2 hours later I received a call back saying that its only a 2-year warranty. Their website where I registered my product (warranty.dacor.com/member) clearly indicates that my refrigerator is still under warranty. When I confronted them with this, their answer was anyone can register anything on the website and it proves nothing. In other words, registering your product offers you absolutely no protection.I provided their supervisor all documentation requested, (including proof of title of ownership of my house!), and they still repeatedly stated its only a 2 year warranty. When asked where they are getting this information, they simply said thats what we have in our system. I asked to speak to a supervisor, but they said none were available. I left a message with the supervisor, but none ever returned my call.Dacor continues to offer their 3-For Free warranty to this very day. As a busy physician, I keep good records and pay attention to detail. Dacor has been to my home previously without incident. I am extremely disappointed in what appears to be the companys blatant attempt to deny warranty coverage despite ample documentation that its still covered. I would caution folks that their 3 year for Free warranty is simply not true based on my personal experience today. I will no longer be purchasing any Dacor products because of this, and will relay my story to anyone interested in purchasing Dacor products.

I purchased my 30 range and was so excited! Well no longer. First the wrong range was delivered. I had to wait another three weeks for the correct one. My oven can not cook at all. Temp fluctuates by 100 degrees. Going on my third service call and still not working. It very unfair, I have to take time off work to wait for repair person, then nothing is fixed. I wish I could return this lemon. But after reading other reviews I am not alone. Why is this company not accountable for ripping hard working people off. I love cooking. Its my passion. My Kenmore Elite was half the price and far more superior.

We have a Dacor gas range RSD30R that we bought to upgrade our kitchen in 2002. We have had several issues with the range to date. The first issue we had with the range was the auto lock for the oven cleaning cycle that failed in 2007. It was not covered under warranty and cost $88. The second item to fail were the oven door springs. They also failed in 2007 and covered under warranty. They failed again in 2017 and had to be replaced for a second time. The springs are too weak to hold the weight of the heavy door. $68-$78 for the springs. The springs could easily be changed out as the brackets are still good but they only come as complete units. The last item to fail were the ignitors. Only one ignitor failed out of the four but as the spark module ignites all burners every time any one is turned on, premature failure could be expected as all ignitors light every time. This time the part is no longer available from Dacor. Dacor does not support any products they build after 7-8 years. Parts will no longer be available. I would not recommend Dacor Appliances to anyone as the manufacturer does not support their own products very long. I purchased Dacor to buy American and I regret it now. In contrast every product that Miele made even 20+ years ago, parts are still available directly from Miele and other suppliers as well.

Purchased Dacor Renaissance wall oven in July 2015, Model RNO130S. After less than a year and a half, the cooking temperature began to fail. For instance, set to bake at 425 degrees, the oven would appear to heat properly, but tried and true recipes would be pasty and uncooked at the expected time. I inserted an oven thermometer inside to test and found an erratic pattern of oven heating up properly to 425 but then sometimes dropping back to about 350 during cook time and refusing to ever reach 425 again. ABT repairman adjusted temperature calibration but refused to troubleshoot any further. Just ruined another dinner. Thanks Dacor and ABT for your unreliable product and poor service.

Our new ranch has three Dacor microwaves, only one of which has had a few months of use. The others have very limited use. To this point weve not had problems, but given the opportunity to redo the purchases wed go with a popular brand, i.e., LG, GE, Panasonic. They are more flexible, parts are available, and all three combined would probably cost less than one of these. In fairness, I personally feel the same about our other high end appliances, Wolf, Viking, Sub-Zero and Asko. None beats our former appliances. Maybe its just about show.

I called the customer service number regarding my double oven. It just randomly beeps and now turns off. No error code displayed. It has done this on and off since 2003. Now it is happening all the time. I called customer service and they seemed to act like it is my fault and I need a new touch pad. I inquired and this is a recurring problem with this model. I could not get a straight answer from the person I was talking to. He just told me that if the repairman says I need a new touch pad, then I need to get one. Well I have been doing some research and this is a problem that seems to be haunting more people than I. We own a Dacor gas cooktop that has had to have a switch repaired. We own a microwave that has had two new circuit boards and now a beeping oven that gives no error code and turns off by itself. My advice, do not buy Dacor appliances.

This is an update on my posting regarding our ER36DSCH/NG posted Dec 30, 2013. A Dacor representative has been in contact with us and has offered to install a new oven control which they think will resolve our problem. We are absolutely thrilled and quite surprised that they are footing the entire expense. Now this is what I call good customer service! Thank you Dacor.

I completed a 7-month total remodel of our kitchen and family room, which were connected in November 2007. The kitchen remodel cost $18,000 for various Dacor appliances including the Millenia series of wall oven MOV130S; warming drawer MWDV30; and 42 island hood DHI42130. The remaining includes the huge 30 Epicure dishwasher ED30SCP, 36 cooktop EG366SCH, and beverage center EF24LBCSS. All have the beautiful copper accent package and make for highly attractive appliances. We constantly receive accolades for them. If only they werent absolute garbage functionally and reliability-wise. Others have remarked how the ignitors on the cooktop continually spark, even after the light off. After contacting Dacor and waiting 2 weeks for the repair, for which Dacor sent the wrong part and caused another 2-week delay, the repairman had to rip off the front accent lip of the cooktop to reach the base which significantly dented the front lip. The ignitor worked like a champ for 2 days, then click, click, click - constant ignitions. So I cleaned around the ignitor tip with 409, dried it and it worked flawlessly. Thanks Dacor for your own product ignorance and my now dented cooktop. It has worked well since and is a sound product, so far. If only my luck held out.Next, the wall oven. Very beautiful and my control panel has held out (fingers faithlessly crossed). The oven isnt calibrated though, so follow cooking directions at your own risk. This oven will burn your food if you set the temp and timer to the recommended settings. I have to take off 25-50 degrees and 5-10 minutes of requested cook time or I will smoke any meal. After 2 years of use, I decided to use the cleaning cycle - following the directions to the letter. Forty five minutes into the cycle and kaboo! The front window shattered. Dacor says $700+ for glass replacement; I say send me the part and Ill do it. I got the discounted part for $68; spent 3 hours cleaning and reassembling with care; and the window has held, but I havent tried the cleaning cycle since. Why roll the dice again?Ah, now my fave garbage Dacor appliance - the interminable dishwasher. Truly engineered by the diabolical. I just completed my fourth major repair after 5 years of use. First, the drain valve failed after a few months of use causing flood and was replaced under warranty. Then the door seal failed (more flooding) and was also repaired and replaced under warranty. The dishwasher stinks, by the way, as the unit cannot evaporate effectively during drying cycle due to ridiculously poor rear venting design. So I have to leave the door wide open for hours after use to facilitate drying and stench reduction. The control panel/circuit board has fried twice now in the last 3 years - it just starts erratically beeping and refuses to take input, even with a power reset. Both technicians stated the design and quality of the board is third world, which likely is exactly where Dacor outsourced the garbage.The island hood and warming drawer have worked well, and the beverage center has been reliable but maddeningly causes back left cans of soda to freeze and explode occasionally; even with the set temperature raised to now 45 degrees. Fun to clean up after coming home from a long trip. My expectations are so laughingly low now for these Dacor products that I dont bat an eye with the frozen soda muck this fridge occasionally produces. Customer service though has been helpful and thankfully, American. They have replaced both circuit boards for free well out of warranty. I have only appreciation and great sympathy for the customer service folks who Ive spoken with. I love my kitchen, but hate the appliances in it. Never again Dacor. Never again.

Dangerous condition! I purchased a Dacor 36 dual fuel range 5 years ago. I reported the issue to Dacor via email with no response from customer service. I believe the no response was an attempt by Dacor to distance themselves from their responsibility for this potentially dangerous condition. Specifics: When pre-heating the oven in convection/bake mode, if the oven door is opened before reaching the set pre-heat temperature, a ball of flame will explode up from the opened door. The ball of flame is basketball sized and has singed eyebrows and hair on several occasions. To reiterate - it is a ball of flame, not super-heated air that is the problem. As a result, after non-response from Dacor, we called a decor qualified repair technician who diagnosed the problem as a bad igniter. The igniter was replaced and the problem still exists. I fear that a small child may be severely burned by the engineering design fault.

In August of 2005, I purchased a Dacor pro range. In December 2005, the control panel began to blink and lose display. Dacor gave me names of 2 authorized repair people. After several visits by a repairman, I phoned Dacor and was told to call a repairman. They obviously didnt listen to me! The repairman spoke with Dacor representative who responded that the display needed to be ‘rebooted just like a computer.’ Several times a month, I must go to the electric control panel in my basement to turn the breaker switch off and on in an effort to ‘reboot’. In September 2010, the display panel went dark and could not be ‘rebooted’. I had to replace to control the membrane at a cost of $530.69 plus $169 for labor and a service call. On Thanksgiving 2010, the ‘new’ display panel which was obviously defective, stopped working. Once again, a new membrane had to be ordered and installed incurring another service and labor charge! I sent a letter to Dacor wanting reimbursement of labor/service on original defective membrane and was advised that they warranty their products, not the service! It is now November 16, 2011 and I still must continuously ‘reboot’ the control panel! However, I spoke to an authorized Dacor repairman who told me that Dacor has had many complaints such as mine and now have a devise which attaches to the power cord and filters out the ‘noise’ from other household items which disrupts the control panel on my oven! Is there a reason why Dacor is keeping this a secret? Do they not want to make their consumers happy? I cant wait to be rid off this appliance and all association with the Dacor company!

My Dacor oven (DO130S, S/N V-A-10160044) is less than 18 months old. While it was in use, it popped, sparked, tripped the circuit breaker, and died. I called customer service, and voiced my concern on safety due to potential electrical defect. Steven, the customer service person advised me that this oven is no longer in warranty, and to call a repair service. I reiterated the concern for product safety. He placed me on hold, and the call was dropped. I called again, and Mike answered. I repeated the same info, and he was not willing to listen to any concerns. He hung up on me. This experience does reflect on published Dacors commitment to customer service, or product safety.

I purchased a DACOR PGR-30S LP in 2002. It has had a number of problems due to poor design that required replacing the control panel as well as other parts. However, it has recently developed a gas leak and thus is no longer usable. To fix the gas leak, you must take off the top burners to get to the leak and make a repair. UNFORTUNATELY, DACOR has to make room for new parts and no longer makes the O-Rings required. Yes, apparently a $10 O-Ring takes too much room seven years after I bought my range. So, in 2009, DACOR discontinued making the O-Rings and now I have a very expensive paperweight that I have to take to the dump so that I dont blow up my house. I wouldnt ever buy a DACOR again. The customer service it terrible and they cant even be bothered to carry simple repair parts. Buy a Wolf or some other high end stove because DACOR is literally a piece of junk!

I could have written every one of these negative reviews. Ive had all the same issues with my Dacor Epicure oven. Faulty computer panel, failed motor in the downdraft fan, oven not maintaining temperature (meaning NOTHING cooks correctly in this oven), burned out lower element and discolored interior. And let me add that the interior oven fan stays on for about half an hour after you turn off the oven. What purpose could that possibly serve???? Suffice it to say that this is a poorly made product by a company that has no desire for repeat customers. I am currently working with customer service to try to get my oven working for Thanksgiving, but I just dont have much hope after reading all of these similar issues. Clearly, they manufacture a sub-standard product and sell it at premium prices. Nice business model, for a while.

We purchased a complete kitchen with Dacor Modernist stainless steel look. It has been a complete disaster since install day. The first week the Dishwasher flooded my kitchen causing water damage to my brand new kitchen cabinets. There was a seal issue. My ice machine has been worked on 6 or more times. They have replace every part in it and still doesnt make ice or if it does it freezes in to one big block of ice. My microwave combo oven just broke again today with same error code as last time. They had to replace both motherboard in the oven and microwave. Tomorrow they are coming because my dishwasher never completes a cycle. It shuts off at 16 min left. I have been asking for replacement units or better yet take it all back...I would not recommend Dacor espcially how much we paid... over 30,000.

We built a home in 2006 and installed all Dacor appliances. I would never ever purchase these products again. My gas cooktop was the top of the line product from Dacor and I have had nothing but problems with it for 5 years now. I have spent over $1000 fixing the large burner that continues to have leaks with the seal to the point where the flames come out the bottom of the burner. Most of the other burners click when lit even though they are clean and away from a draft. I have had 2 Dacor approved repair companies out and they both recommended against Dacor. In addition, the finish on the cooktop has soaked in my heavy duty cooking juices and foods and the stains will not come out. Apparently, this is due to the new finish they used so that the metal can withstand the high temperatures. If this company were an auto mfg., they would have had to do recalls and face potential class action suits. I would prefer to be cooking on a camp stove rather than my Dacor. When I contacted Dacor, they offered parts at a reduced rate which still cost a fortune. When I asked about replacement, they said they would sell to me at a discounted rate which was still $2400. Bad product, bad company. My cooktop is still giving me issues. it is embarrassing to cook with friends around because of the problems.

I purchased the 30" All Gas Heritage Range, the Convection OTR, and the Counter Depth Refrigerator! I am obsessed with all of these gorgeous Dacor appliances! From the brass caps on the range, to the chilled water pitcher in the door of the refrigerator...Dacor has thought of it all! I have enjoyed cooking more and would recommend these products if you are wanting to update your kitchen appliances!

We have an 11 year old Dacor double oven with convection on top. The relay board malfunctioned and there are no parts to repair this. All Dacor would tell us is that they dont carry the parts anymore. Evidently, they are not required by law beyond about 8 years and that appears to be all they do. Our appliance repair person even contacted a company that rebuilds electronics and they cant get parts for this board. It is unbelievable considering what we paid for the oven. So we now have to replace it. Dacor offered us a discount on a new one. Not good enough. I cant imagine putting another Dacor product in. Two appliance service people have told me that Dacor has this reputation and they would not put them in their own houses.

The range cost over $7,000. In the first 2 years multiple malfunctions in the mother board, the convection oven functions, and had to hire a local company to repair. The Dacor company did not care. Called them multiple times, wrote them and received no assistance or response. Repairs cost $$$$ to fix each time something broke.

I have had my 30 inch Dacor Dual Fuel Range since 2002. In the past month, the oven door seems to be falling apart. I had to replace the oven door handle after the handle cracked in the spots on the right hand side where the screws go in. When I tried to screw the new handle in, I noticed that the front panel on the door is lifting away from the door. It is more separated on the right hand side which leads me to believe that it is the reason that the handle cracked on that side. As a result, the handle cannot be properly installed. The only way this can be repaired is to call someone in to do it and it will either have to be glued together or the whole door would need replacing. Reading these forums, Im worried that my oven problems are just beginning and I dont want to start sinking money into this oven. I purchased a Dacor as I believed it was a high quality product and that it would be worth the money and last a long time. This type of problem should not be occurring. I do not consider 10 years a long time for a product like this. My sister has had her Jenn Air oven for almost 20 years and it has no signs of wearing out.

Five years ago we built a new house with a big open kitchen for entertaining and family. I like to cook. After talking to a kitchen designer and high end appliance dealer in San Antonio, TX, we decided to go 100% Dacor for the kitchen. What a nightmare! The oven was replaced within the first three months. Since then we have had two relay boards replaced (one within warranty, one not) and one thermostat replaced. When the oven is working, I like it very much. But it is a lot of trouble to get it fixed. The refrigerator defrosting until has gone out three times as well (once in warranty, twice not). Today the unit is not cooling at all. It is hard enough to find someone to service these units outside the big cities, so when we do find someone it takes days for them to get here to diagnose; days to receive parts; and days more to fix. I will never buy another Dacor product! I will say this, the Dacor headquarters have tried to help and even gave discounts on parts, but 5-year appliances should never have these many issues. Our last kitchen was 100% KitchenAid and we never had one problem with anything for 6 years!

Warning: Warning, safety hazzard for all, adults and children. Recommendation: The knobs should be set on the top of the stove, not the front where children can reach. Control knobs should click when fire and gas is turned off, and highest flame setting should be at the end of the turn just like a clock. I inherited this range as new owner of the house. Today I used the high flame option of the gas stove. When I was done with cooking, I turned off the gas according to the knob position, front of the turn. Later I discovered the range was not exactly off. It was still hot but no flame could be seen.I checked by sight the control knob position, it was set incorrectly in off. Then I touched it and realized the knob actually has a bit more to go to the end, slightly before the off position. Therefore it continues to release gas with unobservable flame. This knob does not click when user turns it to the off position. It is just a silent knob with an inaccurate cue of a heavier black line for off and on indication. Besides, high flame setting comes at the beginning of the turn of the knob rather than the end, it is counter intuitive to our mind of increase heat by turning the knob further on, like our clock. Oven racks are hard to put back after cleaning. Once a rack almost tumble out while food was sitting on it.

I have a 4 year old Dacor Renaissance 36 in gas range. The thermostat is broken, the self-clean cycle doesnt work due to a broken lock and the oven indicator light stopped working about 2 years ago. Pros: It is an attractive oven with the knobs that light up blue when on and the burners all work fine but that is it! The technician told me ALL parts I need are on backorder due to Dacor being bought out by Samsung 2 years ago and COVID related delays. He also told me there is no ETA on those parts and said it could be an unknown amount of months. So now I dont have an oven for an unknown amount of time. This is unacceptable. I was sharing my frustrations with a friend who recommended I post this on Dacor Applicances Facebook page. He thought I would get an immediate helpful response. So I did. It was taken down not more than 3 minutes after it was posted! They never even reached out. Pretty poor company service. I will never buy Dacor anything again. Even when the oven was working ok - it never kept good heat and the self-clean cycle never cleaned well - there was lots of grease residue left behind. This is a poor quality company all around. Believe the negative reviews. If I could give negative stars, I would.

I completely gutted my kitchen on 2/22/92, and purchased a Dacor CPD230R double oven. Whenever I used the self-cleaning function the next day, F0 would appear. I would have to get a repairman to come to my house. This cost me a fortune. For one year, I just used the bottom oven. I finally called Dacor, and complained. I wrote a letter to Mr. **, and wanted satisfaction.They decided that I could purchase a new, better oven for $1,480.00. This was 1998, so in 6 years, I spent $3,680.00 for 2 ovens. After 5 years, I started having the same problems. Every time I used the self-cleaning function, F0 would appear. I just totaled my bills for the new, better oven, and I have spent $963.00 and it would be more, but I figured out, if I pressed cancel and held it, the F0 would disappear. So every time I used the oven, that is what I did. This would last for 8 months. The oven completely shut down, and I could not use the top or bottom. I just had a repairman here, and he said i need a new membrane assembly, and latch. They were supposed to call me with an estimate. They just called, and said the part is no longer available. This is upsetting. Reading the reviews, I see I am not alone in my dissatisfaction with the Dacor oven. Now, I will be redoing my kitchen.

I did a kitchen remodel in 2008 and was convinced by the sales guy at Home Expo to go w/ the Dacor over the Wolf. I bought the dual-fuel 36... Within 2 years I had serious problems. The oven, when not on Convection Roast or Con Bake, just using Bake will consistently turn itself off... Ive ruined many a meals, usually big ones: Turkey, Prime Rib(long cook time items). This was by far my most expensive investment in my kitchen and by far my biggest disappointment. I have called Dacor in the past and was told they could refer me local repair people, I was on my own for fixing it. Again, huge disappointment.

This fridge is great. We visit warehouse stores for groceries and everything fits perfectly. The shelves can move for tall items or more bulky ones. The freezer is large and can fit so many different items. My 2 other favorite things are the fresh drawer and auto refill water pitcher. The fresh drawer temp can be adjusted and can fit anything from wine to a cake to cheeses and meats. And an auto fill pitcher keeps the water super cold and you never have to worry about someone forgetting to fill it back up.

Weve had these appliances for 15 years. The cooktop has worked well. However, it could be improved with a lower lever for heating on its small burners, allowing it to simmer water rather than boil. The Dacor exhaust we purchased is one of those type that pop up out of the counter. It works but leaves much to be desired. When it runs, it pulls so much air the flame goes out on the burners. It is still not efficient at getting rid of cooking smells or smoke either, but that is simply a problem with all of this design so I cant fault Dacor. We have the biggest problem with the double oven. There are three main issues: 1) Whenever we run the self cleaning function, it pops the heat safety switch inside the oven housing so I need to take it apart to fix it. Hence we work to keep it clean so we never use the cleaning cycle. 2) The oven door gaskets prevent to door from closing and sealing all the way. The door tilts out app. ¾ because of this. We were told by the service guy who came to fix problem 1 above that this is the way the doors are(!). Our bottom one also tilts out but not as much. Ive dealt with this for 14 years! 3) We have to sand the burner electrodes on the cooktop to ensure they spark to light the burners at least 2-4 times per year. Not sure if that is normal or not.

The problem started with our refrigerator unit when it was still in the first year of a 2-year warranty. We have had over 9 service calls for various problems; we had to replace the circuit board, switch and the pan twice. The warranty runs out soon. After five unanswered calls to the customer service number, we were finally able to get through; not that it made a difference. Their response was, “We apologize, but there is nothing we can do?” Sound familiar? Dacor refuses to extend the warranty even though the problems seem to be bad design, parts and customer service. Dacor says when (not if) you need another repair, well work with you. Yipee! We get to work with them some more and pay for the privilege. Dont make the same mistake we did. We will never buy a Dacor product again.

The ovens needs a new latch kit and a mew control panel every year. It has been repaired 15 times. So many issues but those are the most consistent problem areas. Dacor should have replaced our range the first year. Even the repairman says everyone has had the same issues. For what I have paid in repairs I could have bought a new range.