Have had an on-going issue trying to replace an oven door....since early December 2020. Have gotten a continuous run around regarding status of new door and shipment of same. Friendly Customer Service Reps do nothing to solve this issue. The oven door is designed not to be repairable or user friendly. Poor support and steady excuses have created another DIS-SATISFIED CUSTOMER!! AVOID DACOR!!

As a contractor, we were fortunate enough to build our dream home which was completed in 2005. After much research and many show room visits, we purchased Dacor appliances for our kitchen. As the saying goes, if I knew then what I know now. Our biggest (note I said biggest, not only) issue is with our ESC130 oven. If you own this oven, do not, repeat, do not, use the self-cleaning mechanism. I have had this repaired once and then replaced once (along with a relay board). I seldom use this because I know when I do the lock mechanism will continue to cycle until it is replaced. This means, while I can still use my oven, I have to time when I open the door based on when the lock is cycling in the unlock position. I must also turn the oven off at the circuit breaker or listen to the continuous warning beep that the lock is cycling (as if I didnt know).After repairing this feature once, I next choose to have the mechanism replaced and Dacor offered me a discount on the parts (the oven was and still is out of warranty) at a cost of more than $500.00. This is on top of what I had already paid to have it repaired just 18 months earlier. I feared using this feature again as I didnt want a repeat performance. After cooking macaroni and cheese yesterday, I felt I really needed to clean the oven and made the mistake of using the self-cleaning feature of the oven. I dont know why I was surprised when the locking mechanism refused to stop cycling.I contacted Dacor today only to speak with the rudest customer service representative I have ever encountered, Steven. No last name. He is the only Steven who works there. He refused to listen to me, spoke over me when I did try to talk, and did not allow me to speak with anyone else. There are no supervisors available on Fridays and he could not transfer me anywhere. I left a message for someone else to call me (they did not). I called back later that afternoon and was given the name of a supervisor, Nhi. She was not available and I spoke with another customer service representative. I learned that Dacor is aware they have a problem with this locking mechanism and are trying to correct it. This got my hopes up, thinking that the company would now do the right thing and replace this mechanism at not cost to me, or at least at no cost for the parts. Not so. Even though Dacor knows there is an issue with this mechanism and they are supposedly trying to correct it, all they can offer me is a discount on parts. Really? Wow! A discount for a part that you know doesnt work properly and probably wont work properly because they are still working on the problem? I just really dont know what to say. Is this supposed to make me happy as a customer? Would prospective customers want to buy a Dacor product knowing that Dacor is more than happy to sell me a known defective product at a discounted price and they should expect the same? It is probably needless to say that I would urge all prospective Dacor owners to not waste their money on any Dacor product as they do not care about their customers. I will certainly be doing my part to warn others and hope this serves to warn others as well. Dacor has a lot to learn in terms of building even what could be called a good product and standing behind what they sell as well as becoming a customer service oriented company.

Dont waste your $$ move on to another MFG. I have owned this dishwasher for some time it never worked anywhere near what I paid for it. The glides fell out of the racks. It never finishes a cycle. I have spent $350 for repairs three times and it is still way less than satisfactory. Move on, try a Maytag, Bosch or Miele. Also parts are astronomical and you will need them. If you are thinking about buying this brand google it and read on. We all have the same opinion of the Dacor Dishwasher thumbs down.

We bought the Dacor Wall Oven (ECS136SCH) in 2006 during a complete kitchen remodel. In 2009, the relay board was replaced twice. The first time, it was over $500 to replace. The second time, it was covered under the parts warranty when a terminal was bad. Now, I need another relay board and a new element which will cost over $700 to replace. For an oven that was originally over $3000, this is not acceptable, but what other choice do I have? The technician told me that Dacor has the worst mark up for replacement parts. I thought I had done my research and found that Dacor had a good product. I guess I was wrong.

After remodeling our kitchen, we purchased a professional line Dacor stand alone gas range/oven. Within a year, the heating element needed to be replaced. Subsequently, the control panel almost caught fire and needed replacement, following a second heating element. The oven is not reliable and has cost us over $600 in repairs, labor and parts. The Dacor company is not willing to recognize that this oven is a lemon, even though their rep admitted that the number of repairs seem to exceed the average number. The company refuses to pay for a tech to come in to examine why this range continue to have electrical problems. It is not working again, and the customer service rep wants us to pay out more money to have their tech diagnose the problem and pay the cost of repairs and labor, while they will cover the cost of the parts. I am done paying out more money on a defective appliance. I could have purchased two new less expensive (and more reliable) ovens by now.

We have enjoyed our Dacor oven for a number of years but cannot recommend this brand due to high cost and frequency of repairs. The relay board, at $400 a pop parts cost only, has had to be replaced twice within 5 years. The oven door hinges failed in normal use so that the door would not close tightly and had to be replaced. The halogen oven lights fail frequently requiring replacement. Parts cost is only part of the issue. The inconvenience of not being able to use the oven for extended periods of time and high appliance repair labor costs are significant. All in all, a very good oven but reliability and frequency of expensive repairs lead us to not recommend Dacor ovens.

We just purchased our home in March of this year. The previous homeowner purchased a Dacor oven; it is electric & propane. She purchased the appliance after a complete home renovation in 2008. They lived in the home. After 1 year, they moved out and had it on the market. We purchased the home in 2012. As soon as we moved in, we noticed the oven was not working. We called an appliance repairman - $564.00 service call and part for a new relay switch. It was great; the oven worked. Not even a day later, an F1 error. We called them back out thinking they must have done something incorrectly. They then said we needed a new control panel. We did not have an additional $400.00. We just moved, so he said you could still use the oven. We did. We would use it and flip the breaker off so we did not have to hear the annoying beeping sound. Then I came home and bam - no display, no oven. We called a different Dacor certified appliance guy thinking the first company was just taking us for a ride and it was their fault. $572.00 later, we got a new control panel, but guess what, the technician did not even make it to his truck before beep, beep, F1. He came back in and then said we needed to replace the display screen - an additional $217.00 with no labor charge. We told the man to shove it. I had every plan of taking the oven to our back tank and using it for target practice. But in good business practice, since this company already invested $572.00, we could not ask them to eat the money, so we allowed a third fix of the oven. While the technician was here, the oven made a horrible loud sound and shot out flames. He insisted maybe it was due to it sitting for a week without use. He left. I never noticed this flame before when the oven worked despite the F1 beeping. Now it’s hit and miss. Some days it will shoot out a flame once until it reaches 200+ degrees and then you can hear the fan kick in. Some days, twice, I have had it happen 3 times. If my children were to open the door during this event, I am sure they would be seriously burned. At first I was thinking maybe it is normal for this oven to shoot out flames during preheat mode since after $1300.00 repairs maybe it is just not functioning correctly. But if it were a normal function of the product, to me it would do it every time consistently and not three times, or two times on some occasions. I hate to admit this but I am almost fearful of using my oven. I currently have a pie to put in for dinner and I’m thinking its 3:09 pm; I could set the oven to preheat while I run to get my kids from school so if it decides to blow up, I am not home and that is pretty sad. The last repairman we had come out said in his personal opinion, he wouldn’t have repaired the oven, because they are known for issues, and he would have gone to Lowes and spent $300.00 on any off brand stove first. We have considered that, but this stove is extra-wide and the cabinetry is built around it. So for us to purchase an oven to slide right back in it would be another $1300.00-$2000.00. We have issues with the burners not always wanting to light. I almost caught on fire lighting one because it shot out flames when it decided to finally ignite. Sometimes it just clicks. Currently, I am down to two burners when just two days ago all six were working just fine. Over Thanksgiving, it took no kidding 1-hour to cook brown and serve rolls because the oven did not reach the set temperature. We stuck my husband’s bbq thermometer to see. It was 256 degrees, not the desired 350 degrees. Does this stove have warranty? We have no clue as the previous homeowner purchased the stove. She claims to have spent $5,000.00 on this stove or more during their purchase. We do not have warranty on our home so for each repair, it is out of pocket for us, and currently we really are thinking any knock off brand at Lowes would be a better product than a Dacor oven and less of a safety hazard for our family.

This will be the third service call on my Dacor Built-in Refrigerator with the freezer making icicles and the fan making a loud noise. On top of that, I have two light bulbs in the freezer that went out from the ordeal. From my review of the complaints here on Consumer Affairs, I see Im not the only one with this issue. This is a yearly problem, and I hope Dacor would step up and resolve this for me since it truly is a poor design issue and no fault of mine.

When I completely remodeled my kitchen 6 years ago, I actually went AGAINST the advice of my appliance dealer and kitchen designer and insisted on buying the Dacor 30 double convection wall oven. Id been longing for Dacor ovens for years and though they gently tried to steer me towards Miele or Electrolux, I dug in my heels. Ive regretted ever since. Since first use, my electronic display has not been without an error message. Every time I go to turn on the oven, theres a message telling me to clean the convection fan filter. I called Dacor and they told me to ignore it! It was a mistaken message. Still, I cleaned them repeatedly to no avail. The main electronic circuit board on the oven has gone out three times. They paid for it the first time because it was under warranty. The second time they sold me the part at a discount but I had to pay for the service call. Total cost to me: $480. The third time, I had to pay for everything myself. Total cost to me: $870. They told me its because I broiled with the door open. I have NEVER broiled with the door open! The inside lights go on and off randomly. The temperature probe has NEVER worked properly. Last week, I was preheating the oven to bake some cookies and an alarm went off giving me a cooling fan error message. The oven turned off and I cant get it to turn back on. I called Dacor customer service twice so far and the first time they told me they would research the issue and call me back. They NEVER CALLED. I called again and they told me they could ship me the part and I could pay for the service call. The lower oven is currently working so I havent done anything yet, but the oven originally cost me well over $5,000. I have put another $1,300 into it. Im not about to spend another $500-$600 on this complete waste of money. Bottom Line: Dacor sells junk for exorbitant prices and refuses to stand behind their products. I was an idiot to fall for the Only True Convection Oven in the market line. Im buying a Miele or a GE to replace.

We remodeled our kitchen less than 5 years ago. As we have owned restaurants in the past, we wanted commercial quality appliances. I was looking at Sub-Zero and Viking or Wolf. Unfortunately I took my Home Center convince me to purchase A Dacor package. That was a mistake. Even though these appliances cost as much as the those brands, the quality is not even close. After spending $22,000 on appliances I have quickly discovered that these appliances are junk. First the microwave began to arc and nearly caught fire. Even when they installed my cooktop. I noticed that the burners in the middle were marked incorrectly and the blue LED indicating the burners are on was burnt out.After only a few years, now my ovens are not working. And right before Thanksgiving I am without ovens. My old ovens were almost 50 years old and worked fine. These $6000 plus ovens are not even 5 years old and are down. I am kicking myself for not going with my original plan. If you are considering Dacor, I would not recommend.

The functions are useful and so far everything works the way it supposed to. No real complaints. Convection and baking features are really useful when it is a small thing to start an oven. Easy to operate. Everyday cleaning is easy as well.

Dacor ERD30s06BK/LP - thought reputation was good. Quality seemed outstanding. Like: Appearance; Dislike: Performance, Reliability, Serviceability, Quality of parts, Availability of parts. In a word: Dont buy a Dacor! Ive learned that if you have a repair person/organization you can depend on ask them to suggest the best appliance based on their repair experience and their ability to obtain parts. Dacor has already replaced range once. Oven interior cracked when self-clean was used. Stovetop burner ignitors frequently continue to spark after flame is established. Stovetop burners will sometimes extinguish when flame is low. This experience showed me that just because an appliance is expensive, it doesnt mean good performance or high quality. Because of the cost of replacement we have lived with the Dacor until the next major repair is not possible because of lack of available of parts or cost.

We purchased a Dacor Epicure dual fuel range when we built our house 7 years ago. It was the most expensive appliance we bought and we wish we hadnt. We have had no problems with the stove top, but the oven, specifically the broiler unit has been a consistent problem. We rarely use the broiler and use the oven perhaps 2 or 3 times a month. Yet, the igniter had to be replaced in March of 2008 and again, in June of 2010. In January of 2011, the broil gas valve was changed and now in September, the broiler is again not working. I cant see pouring any more money into this appliance and will sell as soon as I find a buyer willing to take a chance on it. We have been greatly disappointed in this product.

We remodeled our kitchen because my wife is a chef. So we thought a full suite of Dacor products was just what she needed. What a mistake! Our $6000 36-inch dual-fuel range had problems from the start. We had to replace the control panel, heating element, convection fan, and door seal. Finally, the liner split and the range became unrepairable. We made the mistake of purchasing a simpler, gas-only range because Dacor offered a modest discount. This $7000 range lasted four months before a failure in the wiring harness made it unrepairable!! We bought a Miele replacement. We have had performance issues with our Dacor warming drawer and microwave. DO NOT BUY ANYTHING DACOR!!!

I purchased all Dacor appliances when our home was built 3 years ago. The Refrigerator has been serviced 2 times already and now requires manual defrosting every month to keep it functioning. Now the double ovens broken! These appliances are expensive and a total nightmare...never buy them!

This is the second time I have purchased these appliances and unfortunately each one has been a great disappointment. I have spent enough in repair bills to almost purchase a warming drawer. Each one shuts down when the self clean button is turned on, and then I have to call a repairman out to recalibrate the oven to work each time I try to use the self clean. I was told by the last repairman that the life of the oven is greatly shortened if you the self clean mode. If this is the case, either fix it or take out this mode. After I had the oven about a year the oven door glass blew out, and this had to be replaced. The temperature in the oven is very unreliable in different areas of the oven and browns more on one side than the other... For the high end cost of these ovens, I would just as soon have a basic oven that works and does not go out every few months. What a waste of money I consider Dacor to be, and will never recommend it to anyone I know. I am in the personal shopping business and have my own company, but will tell my clients to be very aware of the high cost/low performance of Dacor products... On a scale of 1 to 10, Dacor gets a 1.

I purchased a Dacor Double Oven 5 years ago. It is a beautiful design, but unfortunately a piece of junk. Over the 5 years I have had the oven, I have had service technicians repair the oven on 7 different occasions. Unfortunately, my oven is not out of warranty and has failed once again. Today was my 8th attempt at service and the service technician could not get the oven working. I have called Dacor, pleading with them to stand behind their product and to replace this useless piece of equipment. I continue to get L22 error codes, and the main circuit board had been replaced twice. After persistently calling Dacor’s customer service, they finally said they would sell me a new oven at a discounted price to the tune of $4800 plus tax, shipping and installation. I ask myself, why would I want to buy another piece of junk? If Dacor wont stand behind their products, perhaps someone should initiate a class action suit against them.

My stove is 3 years old and I have had to change the LED lights on the burners 5 times. One of the burners warped and was changed. The computer went after 2 years, now I have a gas leak in the burner hose. I have bought the extended warranty. I would not recommend this stove if you like to cook. Just make it look pretty in the kitchen!

I own a complete Dacor Kitchen, with many appliances. They are the highlights of my Home. Great features: fast induction cooktop with an efficient silent hood, versatile refrigerator, reliable oven, and of course the always dependable dishwasher. This is My Dacor Kitchen!

I was and, I repeat, was a loyal Dacor customer. I gutted and rebuilt a kitchen 9 years ago and purchased a Dacor stovetop, oven and microwave. I remodeled my new house 5 years ago and again purchased Dacor stovetop, oven and microwave. Consumer reports provided favorable reviews of the appliances I purchased below.First red alert: The oven Model MORS130S and Microwave Model DCM 24S LED did not match. The microwave was green; oven was blue. The brochure was in black and white so there was no way of knowing that aesthetically they were a mismatch ... it was very sloppy(!) and very deceptive by Dacor. I mean when I waited weeks for my appliance order and the oven is already installed with a big fat ugly LED screen, what was I supposed to do, yank it out and start all over again? This was disappointing!Next, I was simmering chili on the stovetop (5 burner, gas) and, lo and behold, 18 flames started exiting through the turn knobs resulting in a meltdown. The gas was leaking through the tubes underneath the stovetop. I just happened to check the chili while I was gardening to watch the house almost burn down and btw, it was difficult to put out the flames because the natural gas was leaking under the unit. Seriously! I called customer service and they got hopping right out to fix the issue. This scared the heck out of me. It is negligent to have a product like that on the market.After about 13 months into the life of the Model MORS130S oven, the touch panel failed emitting a CO1 error message. I was told it was $140 to fix it and that the panel was defective, great quality there, Dacor. And the added joy to the CO1 error message is that the unit beeps intermittently all day and all night long unless the power to the oven is killed. Joy... now another issue - Model MORS130S oven LED lights are burning out. Seriously, what else will there be? Now its $175 for LED panel and another $100 to install by an authorized Dacor service man.So I called Dacor back again today because the LED light out was annoying me. They offered nothing. To be fair, my appliances are out of warranty but seriously, Dacor nearly burned my house down. They should be winning me back as a customer if they really cared about their customers and having long term repeat business. Never again, Dacor, never!

Lemon appliances. The dishwasher breaks every 6 month. The gas range top breaks every 6 month. The Microwave breaks every 6 month. Awful products!!!

Purchased a Dacor freezer. Freezer does not come with outer panel. Understandably, because you can choose to put your own custom panel on or order one from Dacor. Found out Dacor was bought by Samsung, a few years ago. So I decided to order a Stainless steel door from Dacor. One of Dacors reps suggested I order from J@J international. I placed order and two days later they called back saying they cannot ship door to me UPS nor FedEx will ship it. They refunded my money, so I reordered from someone else. Got ss panel toe kick and handle. Opened box only to find out no hardware, brackets ss trim for sides screws and so forth. I assumed mounting hardware would be with door. So began the part search for parts. Come to find out Samsung changed Dacors part #s. Vendors who sell the parts could not come up with parts or told me not available. Reliable parts agent told me this. I was told they should have come with freezer. Meanwhile called back Dacor to someone who specializes in dealing with these issues. She took over 45 minutes of my time giving me the impression she was gonna resolve the issue. She finally said we have the parts and inferred that I must have not talked to reliable parts. I assured her I did. She continued to refute what I told her. I have been right at two months trying to get freezer door installed. I called an Appliance dealer in Salisbury Md. to get assistance. He told me when Samsung bought Dacor he dropped line. I now see why. It has been the worst experience I have had with a company that has absolutely done nothing but appear to be concerned and say they are sorry but do nothing. It looks like it will be another 750.00 to get a couple little trims and brackets and a few screws. If I had it to do over I would never have gone down this road. This has been a two month old nightmare that is still going on. Best advice I can give is steer clear of Dacor/Samsung. Was going to buy matching column refrigerator. Not now.

Follow-up to March 31 posting: In 2001, we installed two Dacor wall ovens and a gas (converted to propane) cook top. The cook top has been problem free and the brushed stainless steel surface still looks like new. Both ovens however, at that time, were problematic during the two year-warranty period. Knowledgeable service people were hard to come by in our region. After numerous service calls, Dacor replaced one of my wall ovens at or around the three-year mark (outside of the warranty period). That particular unit had only one minor issue since then and Dacor replaced the appropriate part free of charge. The other original unit has been problematic since the beginning. The latest problem being the internal light going on/off for no reason and then a lack of response to light button on the front control panel.Long story short, I posted my frustration here on March 31 and was contacted by a Dacor rep within two days. He asked me for detailed info on the problem and located the unit in their files. Some of the past repairs were known to Dacor, but others were not since we just did them ourselves. I was asked to send a detailed description of the current issue along with pictures, which I did. Based on Dacors analysis or the pictures and the exhibited problem, they sent me, free of charge, a control panel membrane, a door gasket and a set of door hinges. We installed these items and the unit is now in full working order.In looking back over the past years of problems with this particular unit, its clear to me the issues all stemmed from an original broken door hinge. It was compounded by the fact that the service and repair folks at the time considered the door gap to be within tolerance and we did not discover the broken hinge until the door glass shattered and we needed to replace it, which required removing the door. Anyway, at this stage in the game, I am very pleased with Dacors response. It is my impression that they are trying much, much harder to stand behind their products. So, while just a short time ago I would have never considered another Dacor product, when the time comes, they would still be on my list of considered vendors because when these ovens work, they work great.

I own a complete Dacor Kitchen, with many appliances. They are the highlights of my Home. Great features: fast induction cooktop with an efficient silent hood, versatile refrigerator, reliable oven, and of course the always dependable dishwasher. This is My Dacor Kitchen!

I bought DCM24S DACOR 1.5 CU CONVECTION MICROWAVE-SS and after few months of using this product its banded on the back wall of the microwave that supposedly resulted from improper turntable placement which caused the turntable tray to make contact with the back of the oven. The quality of the product is very poorly, dont buy Dacor product!

Updated on 09/08/2019: Received a long apology from Dacor regarding their complete inability to service our range stating they would make it right. After sending them all my contact info privately at their request, we have heard nothing. My husband drove to Houston to their showroom, met with Dacor rep out of California, still nothing. Note there are only a few suggested repair services on their website which none cover our area. Avoid Appliance Genius. They wanted $ 500 just to drive 50 minutes travel cost. So here we sit, broiler in main oven out, lighters do not work, and the control screen is blank. Yes, Dacor was great until something broke.Original Review: Our Dacor range was great until it started needing repair. First the broiler went out in the main oven. Then some of the lighters quit working. When we called for repair, every place we called said they would no longer service Dacor because they were unable to get parts. For over a year we have gone back and forth with Dacor state office. They finally sent a “tech” from a video repair store. Really. He charged us $170 to drive to us. Then said he couldn’t get the brass rings off the burners, sorry. Called Dacor again and they said if we found anyone to let them know!!! Yesterday, the the touch panel burned out. I’m done. Dacor does not stand behind their products. I have documented all conversations. Do not buy Dacor.

When the beverage center was initially installed 5 or so years ago, I went to put wine bottles in the wine drawers and surprisingly, the shelves are too shallow to properly hold some of the bottles especially tall Riesling bottles. I contacted Dacor to get some response to the poor design and got no response. Now the unit wont chill and I have just paid a repairman $162 to tell me it is not repairable because the unit has a leak in the refrigeration system and it is within a foamed in area of the system. So after only 5 years, I am replacing my wine fridge, not what I would have expected from a brand that touts itself as being high end. I am very dissatisfied with Dacor and certainly will not be purchasing anything of that brand again.

Arrived in good condition and so far works perfectly. Delivery was delayed by one day because of the incompetence of my local mail service. I bought this microwave, as others have described, to replace a 13 year old Dacor that had not really died but had lost the electronic screen. We put magic marker numbers on the display screen where the numbers had been 5 years ago and kept using all the functions. I decided to replace as, without the display screen, I could not do anything semi sophisticated with this microwave but its motor and microwave capacity was still going strong. This model fits perfectly into the previous 24/27 trim kit. Unfortunately our other trim kit is white to match our old microwave. Decor only has stainless steel now. And the new trim kit for this microwave is flat without the vent slats (plus costs over $300!). From the placement in our cabinet, I think the vented slats are really important to dissipate heat and am puzzled by the change in design by Dacor. The slats are a little tedious to clean but as a TV is above the microwave and an oven below I want the heat to have a better place to go. Ebay has the old trim kit in stainless steel but so far the expense seems excessive for just the outside piece. The internal support bracket for the new microwave is exactly the same as for the previous model so the only part of the trim kit needed for my microwave is the outside frame. This newer model works very similarly to the older version. I am delighted Dacor still makes this microwave to fit my space 13 to 15 years later.

My Dacor Preference 30 double wall oven (model PCD227R) was installed on 5-14-2004. On 12-31-2007, I replaced the upper oven high limit switch for cost $146.56. On 5-19-2010, I reset the lower oven high limit switch for cost $95.00. On 8-27-11, I replaced main control panel (Bezel Assembly), whose parts cost $271.10. On 12-14-2011, I replaced the main relay board for $214.02. On 1-16-2012, I replaced main relay board again, and it is under warranty. On 2-3-12, I replaced upper oven temperature sensor for $32.09. I am awaiting authorized Dacor service technician to calibrate both ovens.

We had problems with it all the time. The front plastic cracked and ended up causing the oven not to work. We have spent (over the past 9 years) about $1,000 on repairs. Now, we just had it fixed and our new clock that was installed into the oven is running fast. After just being fixed, it takes 20 minutes to heat up to 400. Honestly, it always has been that way. We’re not happy with it at all. We bought a Sears brand oven for our church, and it works great, and the cost was only a third of what we paid for the Dacor oven. The Sears brand bakes just as good as the Dacor (when it works). I think it was a waste of money to buy this Dacor oven.

I have been calling every appliance repair company authorized by Dacor to repair mystery problem. No one knows how to fix the problem, even Dacor. Both ovens stop heating during long baking times. I cannot bake anything longer than one hour, temperature drops to 290 or lower. You think your turkey is cooking but 4 hours later, it is nice and raw! Company should offer to repair or recall all stoves with double ovens.

As an add-on to my original review, I had a a service call to address the LC error code. The service company reconnected my unit, turned it on, ran a couple tests, and declared there was no issue. We ran the dishwasher 1 cycle and it worked just fine. Tried to run it again later that day, and the LC code was back again. To resolve the issue, I worked with the company I bought my appliances through to replace the Dacor dishwasher with a Bosch. That happened today, so it is too early to tell say how the Bosch works, but it is more solidly built, has more capacity and the door fully opens with the panel installed.Dacor did reach out to me to try to resolve this issue, so kudos to their customer support, but the issues were just too many. And as I stated in my original review, love the Dacor range top, double oven and refrigerator.

I purchased my Dacor wall oven in 2008 and have nothing but problems. I have had two computers replaced for over $1000 each and other boards replaced. Problems started just after the manufacturers warranty ended. I consistently get a U60 fan error message, no matter what Im cooking and no matter what cooking cycle Im on. It works for about 15 to 20 minutes and then stops and there is no way to restart or reset it.

Replacement light for the oven - I could not find anyone that carries the halogen bulbs for my oven and called Dacor parts line. The bulbs come in a package of two. They were $79.95. I was told I should have called two months ago, that they were $29.95. So would I buy another Dacor Appliance? I think not.

In 2013 we remodel our kitchen. I need a 30" stove and Dacor seem the right fit. I had problem with the igniter burning on that stove and some metal warp as well. They replaced the stove in 2015. I smell gas every time I turn oven on. Last Thanksgiving 2019 the stove stop working. I was told the igniter had burned out and had it replaced. I had repairman come twice because of smell and end January 2020 the stove stop working again. The repairman told me that a jet burner assembly was never installed this is why I smell gas after it is turn on. ** They said they will order the part. It's back order So I contact Dacor. First they told me it's back order then give me a supplier. If it was never installed in the unit shouldn't Dacor take care of it and soon.

This week Dacor installed my 2nd replacement gas range. I remodeled my kitchen 3 years ago and chose Dacor because I had a great experience with their appliances in the past, had their oven and stove in my kitchen for 15+ years and never had a problem. With the first new range, the oven started to automatically shut off due to excess heat escape, so the safety feature would kick in and shut the system down, in addition the knobs would become very hot even when the over was used briefly, 12-15 minutes. I was very impressed and happy with the customer service through Dacor, they immediately gave me a brand new over. Exactly another year, the new oven had the same problem, door begins to not hinge properly and heat begins escape, knobs get dangerously hot.This week Dacor very kindly, replaced my appliance with the new Dacor Renaissance 36. I used the oven for 12 minutes on 400 and the entire exterior is dangerously hot. I do not have any children, however, if I did I would be terrified that they could seriously injure themselves. The exterior of an oven should not become hot like this. Has anyone else had this issue with Dacor? I feel they have been very responsive with regards to customer service however I want an appliance that is safe.

The Dacor gas range/ oven and wall oven were here when we bought our house in 2010. I would never buy any Dacor product again. I will have to look for a replacement for the gas cooktop range. The Dacor gas cooktop is OK except that EVERY time you turn on a burner, one or two of other igniters start clicking and wont stop until you find which one it is (not always the same) and turn it on and off. Please heed this and all the other warnings from the choir. DO NOT BUY DACOR!It is all very expensive junk. The oven temperatures fluctuate while baking. The oven range unit is out of warranty. So our home warranty AHS covered it but they kept sending out the same grubby slob who never fixed the problem but did charge us for the $75.00 service fee. They replaced the oven controller and the temperature sensor. This did not fix the problem. We have a full size oven that we cannot use! Then F1 beeping nonstop, and we have to turn power off to stop it. Now, out of the blue the downdraft fan just started extending and retracting over and over again with no way to stop it without going back to the electrical panel and flipping the breaker that it is wired into. That leaves us with no kitchen and no bathroom plugs! I hung up after 35 minutes on hold. I was just trying to find a certified technician in Bend, OR. Piss Poor Products and Very poor customer service.

My husband and I built our home and moved in November 2002. We purchased a Dacor Double Oven, Dacor 5-Burner Electric Cooktop and a Dacor Microwave. After the second year of living in our home, we started having problems with our double ovens. It would start beeping at different times. Sometimes it would last a few times to off and on for days. Then it would stop beeping and not return for a year. Now the beeping has started again and now it is displaying off. It wont come on. We have turned the breaker off and back on because sometimes that would reset it but not this time. Now before I could call anyone out to look at it, my 5 burner electric oven is dead. I called Metro in Tulsa, OK which is where we purchased them and they gave us the name of a repair person in our town. He came out and told us that we needed new boards for both appliances and charged us $50.00 a piece just for the evaluation. Now one week later, he is calling us and telling us that our 5 burner electric oven is discontinued! I dont want to have to purchase a new oven! I will also say that on my microwave, where the time is displayed it is blank across one line. I didnt even ask to have it look at. Please help!

We purchased the Dacor refrigerator on 11/19/2018. Wasnt delivered until 12/17/2018. Freezer failed on 1/15/2019, had a repair on 1/30/2019 and on 1/31/2019 the entire unit failed. Dacor customer service is awful. Product is awful.

We remodeled our kitchen in 2002 and chose the Dacor 36 dual-fuel range. I was preparing a pork roast for a dinner party with the oven on Bake. The roast was just not coming up to temperature, though the display indicated that the oven was at the temperature I set. I wound up slicing the roast and cooking it on the griddle; my hungry guests were getting restless. Then I tracked the oven heat for an entire day with an oven thermometer. The oven would come up to temperature and then cool off. I sent these numbers to Dacor and asked customer service for an explanation. Believe it or not, the conversation was--Dacor: The temperature is going down because the fan is coming on. Youre not supposed to use the Bake setting, but only the Convection Bake or Pure Convection. Me: Why is the Bake button there, then? Dacor: Were taking it out in the next production run. (This hasnt happened. My sister-in-law bought a Dacor last year before I could warn her and the button is still there.) Also, after using the self-clean one time, I noticed a crack on the inside of the oven door, starting in the corner of the window. The inside of the window is now permanently spotted with baked-on grease. Now my oven does not work at all. The repairman says that the circuit board needs to be replaced, and if Im lucky, it will work for a couple of years. The repair will cost around $700 including labor. The repairman told me that some repairmen in our area will not even work on Dacors because there are so many problems. Im considering replacing the stove... a very expensive mistake. Beware of Dacor products.

Over ten years of using my Dacor oven, I have spent $1595 in repair bills to keep it going. It cost $1875 originally and I would have purchased a more reliable brand if I had known how much trouble the oven would cause me.

Eight months ago I renovated my whole kitchen with all Dacor appliances, cooktop double wall oven, refrigerator and dishwasher and I could not be more pleased. I wanted to wait a few months before I wrote this review in order to make my review more accurate. I love the modern design of all the appliances. The refrigerator is nice and roomy and the cooktop has been very reliable. Dacor products cost a bit more but they are well worth the extra money!

I have own my range for about 2 years and for the most part it is used every day. I love the simmer burner and how strong the rest of the burners are. My food always cooks well both on the stove top and in the oven... I love this range.

I purchased a Dacor Renaissance range for our new home. What a waste of money. Though I have not had any major problems with the performance of the range yet, besides uneven baking, the design is not user-friendly. To begin with, the gas burners share a grate. So when cleaning, you have to remove the whole grate on one side. The controls for the burners & griddle are very hard to see & I have to bend over to see which burner Im turning on. The oven racks are a joke. The two glide racks are very bulky with sharp edges. It is difficult to change the heights or to remove them for cleaning purposes. Though there are three racks included, it is impossible to bake with all three in the oven.I have a GE Monogram that I had purchased two years ago for another home, and I love it The Renaissance & Monogram are similar in price, but I unfortunately, listened to the sales person & let them talk me into the Renaissance. I realized my mistake in buying a Dacor immediately & contacted the appliance store. Even though the Renaissance had not been used, they would only give me a token amount of money towards trading it in for a Monogram. So, I am stuck with a range that causes me to swear under my breath every time I use it. Dacor could learn a lot from GE.

I submitted a review regarding a repair on this same refrigerator Dacor EF42BDCBSS back on 10/29/12 and 10/31/12. We now have another repair bill in the amount of $486.42 for a drain pan kit and defrost thermostat. I tried to contact Dacor by phone and email to talk about the situation, but have not received a response. I would highly recommend that you think twice about buying a Dacor brand refrigerator.

We have a dual fuel Dacor oven purchased in 2001. We have the manual. For some reason, after cancelling a timer, the oven locked at :4. The owners manual was no help. The Dacor website was no help. We turned off the circuit breaker then turned it on again and finally, the oven worked.

I bought a 30 Dacor Double Oven (EO230SCH), 36 cooktop, warming drawer and matching convection microwave. Well over $10k. The microwave has been replaced as it died early within the first year while cooking popcorn - nearly started a fire in the kitchen... However the cooktop igniter died at 4 years and now the wall oven is on its third control board in years 3, 4 and 5. Nothing is under warranty and they want nothing to do with me now. The replacement oven controls cost ~$400 each plus installation. So after all this expense, I have invested $1,200 more in replacement parts and the cooktop needs an aim & flame to light. Total crap. Im going to replace all of this and will never go back to Dacor. I took the time to write this so that others will not waste their time with what I have to assume is the worst quality in the industry. Please dont waste your money.

When our installer removed the packing material, he saw that the oven glass was shattered. Dacor said they would fix it, but wouldnt tell me how. I had to call the local repair shop to see what parts were being shipped. Only the glass! Not even the whole door. The idea that they would take apart and reassemble a brand new oven and consider that acceptable service makes me angry. This is supposed to be a high end company. I responded that this was unacceptable since the oven had obviously been dropped (shatter pattern spreads from the lower right corner of the glass) and might be a safety hazard. No response yet. Ill update this if/when I get a response.

Oh how I wish I never bought a Dacor! It has been nothing but problems. I figured I bought a lemon but after reading other reviews its just not a good product with not very good customer service either. I have had repairs every year, and even after repairs it still isnt functioning as it should. The first problem I had was the whole glass window blew out during baking, which seems to me is a huge liability. The company said that shouldnt happen but is out of warranty and would give me a discount on the glass. I thought that was better than nothing but then 6 months later the relay went out, then baking temps were all over the place in the oven so they said I needed a new motherboard and they said both ovens needed it. So those were repaired. Oh ya and the light in the bigger oven hasnt worked past the first year even after having the light changed and some electrical stuff done on it. Then I had the bulbs changed due to irregular oven temps. The temps are still all over the place to this day.The back right corner gets too dark. The front left doesnt brown and is a lower temp. Now Im having problems with the oven turning off during baking and when using broil in the small oven it causes the large ovens probe alarm to go on and offer at least for an hour. Dacor didnt help me with anything past the glass and its only been 7 months since the new motherboards were put in. I cant afford to buy a new oven at this time and so I only use the small oven mainly since the larger has so many problems. Do yourself a favor and never buy a Dacor!

We purchased a home with a 5 year old Dacor Discovery IQ Double Wall Oven. Model Number DYO230S. Great looking and it has a very sophisticated and functionally rich digital control system. Problem is the digital control system does not work. The stove has a mind of its own and will just shut off for 24 to 48 hours and return to function randomly. Shutting the power off and turning it back on has no effect. Dacor (Now Samsung) has been completely un-helpful. Bottom line response - tough. Product is no longer produced, replacement parts no longer in stock - maybe there is a part on eBay ** Honest that is the answer. I have called parts companies who also complain about Dacor (now Samsung). No luck. So we will now need to purchase a replacement product for anywhere from 4,000 to 10,000 dollars. To replace a 5 year old - 8,000 product. It will definitely not be a Dacor or Samsung product. And I will do my best to put similar reviews on the internet where ever I can.Just to add some balance - 21 years ago we custom built a home and purchased two Dacor ovens. Both were great. 21 years of flawless operation. When we saw this oven as we went through the home purchase process we were delighted. What a disappointment. Also - before the oven started to go wacky on us we needed to replace the bulbs (2) in the oven light fixture. Initially I contacted Dacor parts and had a very pleasant experience ordering the two replacements. However nothing came to our home. Called again and found that Dacor had been sold to Samsung and the price of the bulbs had doubled or more. No exaggeration. Stay away from Dacor and Samsung.

I contacted James ** at Dacor. His attitude was excellent and he resolved my problem (deteriorating dishwasher racks) beyond my expectations. He was compassionate and understanding every step of the way. James followed through on his promises in a swift and efficient manner. I would recommend Dacor and James ** to anyone. He is an asset to Dacor and should be recognized for his professionalism.

We had our whole kitchen renovated and purchased Dacor appliances through Caplans Appliances. We purchased the appliances in the summer of 2019 and they were shipped shortly after. Since our kitchen was still under construction the appliances sat in our home. They were installed the second week of November. Two months ago, I woke up to a sucking noise from the dishwasher. The dishwasher had a code of LC. We removed the custom kick plate to realize that there was water damage. Dacor has been contacted on numerous occasions regarding this and the dishwasher continues to leak. We have had 5 service calls to house and the problem persists. The seal has been replaced twice in a 2 week period. The repair company HARGTA gives us a window and does not show up at that time causing me to sit around all day waiting for them and then some days having to cancel work. Dacor customer service continues to say the Regional Tech Manager will be the one to provide the resolution and we have not heard from them yet. The reviews on here clearly indicate that the dishwasher leaks. We are risking damaging our floors which were put in at the same of our renovation. Looking for a resolution ASAP. To those considering Dacor appliances do your research.

I remodeled a kitchen in a high end house and so wanted nice appliances. I had KitchenAid (which Id had a lot of issues with) for about 16 years. (Since I built the house - the fridge was rebuilt 3 times.) While looking for which appliances to use we were at an open house and a chef was cooking and giving a talk on the Dacor ovens in it. So... I reviewed a lot, liked what I read, and chose Dacor. I love them, the cook quality, the features, all of it. BUT my double oven had issues from the start. An annoyance at first with the built in Android but I didnt complain a lot. Move forward 1.5 years and the Android tablet built into it would freeze and not restart without throwing a jumper on fuse box. I called Dacor and they gave me a number of options, disable the Android because of a known issue and get $500 back, or - return the oven for full credit and theyd pay to have it removed (1.5 years later... cmon thats pretty awesome), or - pay $500 and move to the newest higher end model with steam cooking. Wow, talk about stand by your product! Ive never seen this before with an appliance manufacturer/vendor. Certainly wasnt my experience with KitchenAid. Anyway Im an advocate even though I had a problem and thought they deserved credit here.

Our dacor appliances are 8 years old. Four or five times a year we need to have the technician to come by to fix something in our kitchen, dishwasher, built in fan for our stove top or refrigerator. These items are high price items-- should not have so many problems.

Five years ago we built a new house with a big open kitchen for entertaining and family. I like to cook. After talking to a kitchen designer and high end appliance dealer in San Antonio, TX, we decided to go 100% Dacor for the kitchen. What a nightmare! The oven was replaced within the first three months. Since then we have had two relay boards replaced (one within warranty, one not) and one thermostat replaced. When the oven is working, I like it very much. But it is a lot of trouble to get it fixed. The refrigerator defrosting until has gone out three times as well (once in warranty, twice not). Today the unit is not cooling at all. It is hard enough to find someone to service these units outside the big cities, so when we do find someone it takes days for them to get here to diagnose; days to receive parts; and days more to fix. I will never buy another Dacor product! I will say this, the Dacor headquarters have tried to help and even gave discounts on parts, but 5-year appliances should never have these many issues. Our last kitchen was 100% KitchenAid and we never had one problem with anything for 6 years!

I purchased a DACOR PGR-30S LP in 2002. It has had a number of problems due to poor design that required replacing the control panel as well as other parts. However, it has recently developed a gas leak and thus is no longer usable. To fix the gas leak, you must take off the top burners to get to the leak and make a repair. UNFORTUNATELY, DACOR has to make room for new parts and no longer makes the O-Rings required. Yes, apparently a $10 O-Ring takes too much room seven years after I bought my range. So, in 2009, DACOR discontinued making the O-Rings and now I have a very expensive paperweight that I have to take to the dump so that I dont blow up my house. I wouldnt ever buy a DACOR again. The customer service it terrible and they cant even be bothered to carry simple repair parts. Buy a Wolf or some other high end stove because DACOR is literally a piece of junk!

Less than two years ago, we purchased a Dacor classic wall oven from a local high end appliance store in Durham, NC. Within a few months, the electronics started getting glitchy; the oven started beeping in the middle of the night. I turned off the beep, but other problems started popping up. I baked a pie which was half raw on one side and overcooked on the other side -- not exactly what you would expect from a nearly $5000 oven. Recently, the display has been blinking in codes and the oven has been turning itself off. When I tried to call customer service, I was repeatedly put on hold for 30 minutes after which the system disconnected me. When I finally spoke to a person, she was very rude. This is a horrible company, a horrible product and I deeply regret that the salesperson at the store talked me into buying this awful oven. I am extremely unhappy.

We purchased a Dacor Double Wall Oven in late November of 2019. I liked the oven and it functioned well until October of 2020 when the oven quit working due to a control panel issue. We were told the part was on back order. I continued to check with Dacor customer service and was continually told the same thing -- it was on back order. Never once did they call me to give me an update.In December of 2020 when I called I was told there was an update. The part was no longer on back order it was no longer in production, they no longer make the part. They would review the file to see if they were going to give me credit for the oven or get me a new oven. I contacted them again today and was told it was still under review and it could take them another couple of weeks to decide what to do. I asked to speak with a supervisor but was told that there was not one available. The person I spoke with today said that she would call me next week to give me an update. I appreciate her concern but that does not get me closer to a working oven. I would not recommend Dacor to anyone, customer service is terrible.

I could have written every one of these negative reviews. Ive had all the same issues with my Dacor Epicure oven. Faulty computer panel, failed motor in the downdraft fan, oven not maintaining temperature (meaning NOTHING cooks correctly in this oven), burned out lower element and discolored interior. And let me add that the interior oven fan stays on for about half an hour after you turn off the oven. What purpose could that possibly serve???? Suffice it to say that this is a poorly made product by a company that has no desire for repeat customers. I am currently working with customer service to try to get my oven working for Thanksgiving, but I just dont have much hope after reading all of these similar issues. Clearly, they manufacture a sub-standard product and sell it at premium prices. Nice business model, for a while.

We purchased a Dacor gas range in 2005 for $2000. In a short time the plastic trim around the knobs cracked, and the glass in the oven door had not maintained its seal. I contacted Dacor several times and was told to take a picture and send it to them, then they could decide a course of action. The course of action was that I would pay for materials and labor. I decided not to do that, and eventually I will replace the range with another brand, never a Dacor!

Worst oven Ive ever purchased by far. Pay big bucks and get junk. About 2 times per month, the oven will not heat up. I cant count the amount of wasted food and dinners out, because it does not seem to ignite, only warm up to about 100 degrees. I contact the appliance repair company and it works when they come out, so they dont do anything. I will never, ever buy another appliance from this brand.

My Dacor (3 years old) oven top burners igniters dont stop after being turned on, although they are burning. Ive tried drying them for many hours and applying rubbing alcohol. The front ones do this all the time when we turn them on. When we turn the left front burner on, the front right ones igniter does it along with the left! The back ones do it occasionally, so are still usable. Apparently this is a common problem with Dacor units. Why havent they fixed it? Weve had them fix the electronic panel at huge expense, and are not going to call them again. When the back burners stop working, well get another unit. Ive had gas stoves for 30 years and have never experienced anything like this poor quality. Its amazing that they are still in business.

It give the peace of mind, knowing that having a Dacor cooktop (RGC365) I have one less thing to worry about it. Food is always on time, and my wall oven is so simple to use and clean. Like I said one less thing to worry about it. I been a Dacor customer for over 12 years. There is no need to look any farther. My next kitchen will be a Dacor Set.

We have a 2 year old 36 inch, Model EF361WF refrigerator. Water began pooling at the base every 2-3 days. Called Dacor Customer Service Team. Pitiful response and horrible customer service. Had to call private technician who was very surprised that a so-called higher end appliance was not factory-fitted with a P trap. He sees the problem often with cheaper models. Dacor has let us down twice. Buyer beware: sub-standard products matched with sub-standard customer service. Dacor will never get our business again and we would recommend all potential purchasers to consider other brands.

We bought a whole new kitchen's worth of Dacor appliances - the Modernist line. It's too soon to review their performance, but so far they work well and look fabulous. Most importantly, I had an issue registering my appliances for warranty. I sent an email and not only did they resolve all my issues, registered everything for me, they also notified me I was eligible for an extended free warranty program, and they set it all up for me without any effort on my part. I wouldn't have even known if they hadn't done it for me. So far, I'd say that they have stellar customer service. When researching online before making the choice to go with Dacor, I had trouble finding information and reviews. I wanted to make sure and share my good experience since all too often people only share when they have had a negative one. I hope this is helpful to someone looking to buy!

Dacor dual fuel 30 inch range - First of all the look of the dacor is second to none in my opinion. The digital screen with blue lighting makes this a truly elegant part of any kitchen..... when it works. The range top itself worked flawlessly for me and the main burner was always more than enough. The problem with the range lies in the electronics. The unit has been in my home for over a year and has worked for less than a month total. An error code appeared when ever the oven gets hot. C33, C1, 0000, 1111, C11. Ive seen it all. I have had the main board replaced twice and my local repairman is on first name basis with even my dogs at this point. The final straw for me was when the oven door glass shattered while cooking and when dacor was contacted they said that happens. Im think Ill try Viking.....

I wish we had seen these reviews before we spent 6k on an oven and cooktop. Ordered cooktop and oven in November. Custom color over to match cabinets, still have not received oven (were at the 8 week maximum wait time already). Cooktop appeared fine when we received, but when we went to install, noticed something rattling inside. Looking through vent, noticed several broken interior pieces moving around. Contacted Dacor 3 weeks ago for a replacement or repair, and still nothing. They made us go through dealer, and last week told dealer we refused service. Ridiculous! Now they are telling dealer they cant find a servicer nearby. Am considering declining payment through credit card company for their lack of follow through and service, and let them come get their unit.

We bought 3 very expensive Dacor appliances when we built our home 12 years ago. They have been a total disappointment. The microwave was replaced after just a couple of years when it just stopped working properly - including needing to stop it by opening the door! The wall ovens have needed many minor repairs which have amounted to several hundred dollars after labor charges. I see on this post others have had to repair the hinges! Ours have been replaced twice! The broiler came loose and was hanging on one side. The internal light also goes on and off by itself - sometimes in quick succession. At times, it stays on and cannot be turned off by the light button but by banging the front of the oven! Ridiculous! The cooktop cooks very unevenly. It goes from simmer to boiling over. The ceramic material did not hold up very well either. It is supposed to clean easy. But there are spills that have left permanent stains and we will be replacing that as well. We have also had Customer Service tell us items have been discontinued so we have no choice but to replace these appliances since replacement parts cannot be purchased any longer. This is a warning to anyone considering Dacor - DONT WASTE YOUR MONEY! There are far better appliances out there!

This range was installed in January 2003. The door on the larger oven was replaced soon after because it would not close tightly and still doesnt with the new door. I have always thought that the oven temperature is lower than it should be but have been told twice that it is accurate, tell that to the turkey. The heating element on the large oven was replaced 2 years ago. Four of the burners dont light and have to be lit manually, this has been going on for 10 years. The relay board has burned out and now has to be replaced, $800.00 fix. The technician just left and could not replace it, he couldnt access the tight spot that it was in and wanted to cut the barrier panel to get access to it. He decided not to do the job and told me to call Dacor to get another repair service, which I just did. I was prompted to write this after reading other reviews and remarks. I hope this helps someone out there to buy a different brand.

Our Dacor oven is 2 years old and the oven door stopped closing all the way, rending it inoperable. The company is now owned by Samsung. I tried to schedule a service call to repair/replace the door hinges. This should be a simple process. However, because I purchased the oven through a designer and Dacor dealer, I had to track down the order verification to demonstrate that I am the original owner of the oven (this is in addition to providing a copy of the receipt or proof of purchase). It took several days to resolve this issue with my designer and rep who sold me the oven. Then, I scheduled the service call on the phone only to receive an email hours later advising me that the service call had been cancelled. No explanation was provided. After rescheduling the service call several times only to have each call cancelled, something finally worked with Samsungs tracking system and the service call actually took place.Dacor is the Mercedes of ovens and I expect a service call to be a little more expensive. However, other providers of luxury products facilitate the product support to minimize customer aggravation. Samsung needs to work on its product support and customer service. I would not purchase a Dacor product again since there are several other manufacturers that provide comparable luxury kitchen appliances with much strong customer support.

I got a fridge, a wall oven, a cooktop, dishwasher, wine dispenser and now I am picking up a wine cooler to compliment my wine dispenser. I like a variety of wines and I need a lot of storage space. I plan to buy more wine coolers. Being the top cat of me crew I need a image and style to keep up. Capiche. Ciao.

I have been very disappointed in the reliability of our Dacor refrigerator, model EF42BDCBSS, purchased in 2007. The first circuit board went out in 2008 within 6 months of the initial purchase. A replacement part could not be located. It was still under warranty so they replaced the whole unit. In 2010, we had to have another repair to regulate the temperature of the freezer. Last week (October 2012), the circuit board went out again! Even though the unit itself is less than five years old, it is no longer under warranty. Dacor goes by the original installation date. I contacted Dacor and spoke with LS who basically stated that all they could offer was a discount on the part. This repair is costing us over $650, not including the loss of food. We paid to have the part second day. When we called back the next day to get a tracking number for the shipment of the part, we were told by another representative that the part had not shipped because it was out of stock in the default warehouse. He was able to locate it in another warehouse and get it shipped the same day. I called LS back and she stated that she never promised when it would ship, but when it did, it would go second day. I would not expect this type of repair cost and attitude on a refrigerator that was over $9,000 when new. Now, I am concerned with the liability of our range and microwave, which are of the same Dacor brand. The main reason I took the time to write this email is to make retailers aware of the situation and ask that you seriously look at the reputation of the Dacor appliance line and decide if you really want to promote this product to your customers. Dacor could care less about their customers and/or reputation.

My wall oven spontaneously heating to 800, will be fixed! Thank you, James of Dacor for contacting me again and for arranging for my wall oven to be repaired at no cost. When our oven is in top working order, we love the convection option and we love the internal temperature probe. The people at Dacor offer the friendliest service I have ever encountered and I thank you so much for that.

We did a total kitchen remodel and purchased Dacor appliances. Big mistake. Had to spend 500 on refrigerator repair (model EF36BNDFSS). Oven is off 25 degrees on temperature. The glass top for burners was defective. Would never purchase Dacor. Microwave front trim keeps coming off as well.

I bought a Dacor appliance package for a new custom home which costs over $30K+. Every single piece of appliance is defective. I am OK as long as Dacor can fix or address the issues but it takes them several visits, put the appliance out of order and fixing it does not happen any earlier than 8-10 Weeks. Imagine you living with a fridge, microwave, range and oven for 10+ weeks. The column freezer stops making ice. I call for service and tech informs the lever was jam and he fixed it. Wait 48 hours.After 48 hours still no ice. Another call and after a wait of 3 weeks another visit and diagnose need new part. Wait for part 4+ weeks and another 3+ weeks for replacement. Fridge does not cool and maintains temp 45 degree+. Service tech showed up 3 times and promised it is fixed. Have thrown out thousands of dollars worth food. To date I dont have it fixed. Waiting for a part, tech not available scheduling issues etc. To date I have been out of fridge (8/12/2021) 9 weeks from I made the first call. Currently I have a tech scheduled for 9/1/21.This is not the end. Microwave will run normally and wont heat the food. After several phone call and waiting they figured the door pin was not connecting properly and need parts to fix. After 10+ MONTHS it looks like it is fixed. The range control panel is hanging from underneath and no one seems to care to fix it. Every time I call they tell me its normal. I believe Dacor has not QA/QC in place prior to shipping the appliances to customer. Worst experience ever. If you need more details do not hesitate to call me on **. I hope you run away from Dacor. Dont even consider this option. I have a track of all phone call and email and timeline with Dacor service. I am planning to file a lawsuit and recoup some of the costs and losses.

I purchased a single wall oven in 2008 and 30 days out of warranty, the oven broke. Service required two service calls to fix the door magnets. A third visit was required as the oven codes shut down the unit. The last two service calls have been with the cooling fan. Now that the fan was replaced, the relay board needs replacement, too. I have spent $650 in service alone, which is separate from the cost of parts. There’s no help from customer service; in fact, the rep was downright rude. I will never purchase this brand again and I have told anyone who will listen not to purchase.

2017 purchased 36” range. First year- self cleaning overheated, replaced part. That was in 1 years warranty. But now: only 3 years barely: (I dont even cook much). Oven turns off by itself if I open the door. Oven does not turn off when I am done cooking. If I cook 450f pops warning of temp overheat. Called ABT service (this is where Dacor said) it cost $219 for a service guy to call dacor and to give me answer: I think it is android board. I have to buy a board. Plus per Dacor this board will not have wifi. So there is no Discovery- paid extra for extras I can not have...

When I bought my house, the previous owners told me that theyd been having problems with the Dacor oven. They had purchased a replacement burner and prepaid the Dacor authorized service technician to install it for us. We have worked for three years now to get Dacors authorized service representative to install the part for which he has already been paid, and have been using a toaster oven to prepare meals for a family of four the entire time. The oven will heat to 135 degrees, then either shut off completely or immediately switch to broiling mode and burn whatever is inside it. When I called Dacor to see if they could help with the service issue since the technician was authorized by them, they told me it was my problem, not theirs. Although if the product they manufactured wasnt faulty in the first place, it wouldnt be anyones problem!

We did a complete kitchen remodel in 2007. I wanted top of the line appliances, and I liked the look of Dacor. I spent over $10,000 on a refrigerator, oversize dishwasher, microwave oven and a warming oven... (I know). Within 16 months, everything started to fall apart. Of course it was over the one year’s mark so there was no replacing of the units on the manufacturers part. I have since replaced the motherboard on the dishwasher twice... total of 3K in repairs! I cant replace the dishwasher because it was oversized and we built our cabinets around it and no other company sell an oversized dishwasher. I have replaced the microwave oven with another one that looks just like it because for some reason it fried. The refrigerator constantly rattles and my husband and I are at our wits end because of it. The only thing that hasnt fell apart yet is the warming oven. Probably because we dont use it. I wouldnt recommend it to anyone. Its a total waste of money. Next time Im buying Kenmore. My old Kenmore is sitting out in the garage being a good and faithful second fridge.

One year ago I completely changed out all appliances in my kitchen. My favorite of the four appliances is the range. We have enjoyed all kinds of new cooking techniques. As my wife put it, I did not realize how crappy my previous range was. Gourmet cooking is what Dacor is founded on and we could not be happier with the performance. Our favorite feature on the refrigerator is the in door water pitcher. Fresh cook water that can be taken to the table and refilled upon placing it back in the refrigerator. And the combi-microwave is an incredible second oven. All products have performed as advertised and promoted, and with a three year warranty whats not to love? Thanks Dacor for making amazing beautiful appliances.

We purchased a Dacor built-in refrigerator in 2011. After just 5 years the warning beeper came on. We learned that the main control panel - built by Whirlpool - was defective. We then learned that Dacor did not have any replacement part for this model. Our only alternative was the purchase a new refrigerator. Amazing!! Dacor reluctantly gave us a partial credit for a new (KitchenAid) model. However at the end of the day we are out of pocket over $2000 because Dacor built and sold a defective refrigerator with no ability to fix the problem. Very unsatisfactory handling of this situation.

Motherboard on my favor wall oven has been replaced twice. Repairman said not use the self-cleaning feature as that will cause too high of heat and melt the components. Seriously, Dacor? We spend this kind of money and have these type of repair issues constantly. Just glad I finally was told what might help resolve this - I’m ready for a new oven because of all these problems.

This posting is in response to my original post regarding the Drain Pan heater issue in our Dacor refrigerator. My refrigerator was repaired on 10/16/2012 at no charge to me. My refrigerator is out of warranty, but Dacor stepped up and repaired the issue. The customer service I received was second to none, and I would like to thank James ** for that. Great customer service instills confidence in your product! Thank you!

Dacor Distinctive Series Range model DR30D - One week after the appliance warranty expired, the oven stopped heating. The repair man replaced the circuit board. We still got a code 33 when we try to get the oven to heat to 400 degrees. Called customer service, they said to flip the breaker to the unit off for a few minutes. Seemed to help but we do not use the oven much, as we also have a Meile microwave/oven that we love and use that more. Then I cleaned the oven using only the ovens program. That locked down all of the gas cook top knobs. I called the repair service, it snowed on the Saturday of the appointment. They cancelled. I did not check the stove on Sunday. On Monday the repair service walks in and simply turns it on, no problem. VERY FISHY!!! I have heard the manufacture can control it by computer chips. This appears to be very true. Now the stove does not heat past 250 degrees. After speaking to a few people it appears this is a very common issues. Dacor is a lemon. Do not waste your time and money.

Dangerous condition! I purchased a Dacor 36 dual fuel range 5 years ago. I reported the issue to Dacor via email with no response from customer service. I believe the no response was an attempt by Dacor to distance themselves from their responsibility for this potentially dangerous condition. Specifics: When pre-heating the oven in convection/bake mode, if the oven door is opened before reaching the set pre-heat temperature, a ball of flame will explode up from the opened door. The ball of flame is basketball sized and has singed eyebrows and hair on several occasions. To reiterate - it is a ball of flame, not super-heated air that is the problem. As a result, after non-response from Dacor, we called a decor qualified repair technician who diagnosed the problem as a bad igniter. The igniter was replaced and the problem still exists. I fear that a small child may be severely burned by the engineering design fault.

The refrigerator was installed in April 2017, a $20,000 purchase. It had problems from the beginning and theyve only gotten worse. The unit was replaced (not the exterior, of course) during the first year. And now, less than a year later, it is not working once again. Weve been waiting over a week for a service call and have lost thousands in groceries - have had to eat almost every meal elsewhere - and have not received a single response from their service department. I will NEVER purchase another Dacor product again. I am preparing for legal action.

We have a Dacor gas range RSD30R that we bought to upgrade our kitchen in 2002. We have had several issues with the range to date. The first issue we had with the range was the auto lock for the oven cleaning cycle that failed in 2007. It was not covered under warranty and cost $88. The second item to fail were the oven door springs. They also failed in 2007 and covered under warranty. They failed again in 2017 and had to be replaced for a second time. The springs are too weak to hold the weight of the heavy door. $68-$78 for the springs. The springs could easily be changed out as the brackets are still good but they only come as complete units. The last item to fail were the ignitors. Only one ignitor failed out of the four but as the spark module ignites all burners every time any one is turned on, premature failure could be expected as all ignitors light every time. This time the part is no longer available from Dacor. Dacor does not support any products they build after 7-8 years. Parts will no longer be available. I would not recommend Dacor Appliances to anyone as the manufacturer does not support their own products very long. I purchased Dacor to buy American and I regret it now. In contrast every product that Miele made even 20+ years ago, parts are still available directly from Miele and other suppliers as well.

I have all Dacor Appliances in my kitchen and I am very disappointed and angry. The double wall oven has not worked since day one - cant roast a chicken or God forbid, I would want to roast a turkey for Thanksgiving. The ovens look great, but just wont cook anything. Raw on one side and burnt on the other. One time I roasted a 5lbs leg of lamb for 5 hours! It still wasnt cooked. Recently, my dishwasher has stopped working properly, stops midway through cycle, wont drain water and its just been a total waste of money. I will never recommend Dacor to anyone. Do not buy Dacor. I called customer service in the beginning, as we had problems from day one, but they were of no help so I gave up. I dont use my ovens anymore, they are just for display. Very, very shameful!

Add me to the Dacor hate list. The $4300 oven installed in 2000 is now a whopping $6400. My motherboard #2 is broken and the glass on the door cracked which to me is a safety issue. This is a two adult, no kid household so figure. We use the oven about 7 times a year. My Dacor rangetop and hydraulic exhaust have both required service as well.

Bought the DACOR WALL OVEN in late 2019. Top burner is over heating and burns everything, caused a fire in the oven. Can not even get any response from customer service. Warranty not worth the paper it is printed on. Stay away from DACOR.

We bought our house in 2010 and our Dacor stove was supposedly newer. When I went to clean it, I found loose screws in the bottom. Apparently, the convection element is loosing its screws and washers. Ive had this appliance fixed once already when the cooktop kept clicking. The black plastic around the controls cracked mysteriously. It takes 3 hours longer to cook a turkey than it should. This is a strange stove, which supposedly cost a lot. I wonder if a convection part missing two screws should be used?

I have a Dacor MORS130SS oven that I purchased in July of 2008. After 6 months the first membrane panel failed, one year later the second membrane failed. One year later the third membrane failed. Im on the fourth membrane and now my fine Dacor is burning things!! I can set the temp to 350 and it shows 350 on the display but the lower element never shuts off and whatever I cook gets burned. I bought this oven thinking it might be my last considering the supposed quality of Dacor. I know for sure it wont be my last oven!! I sell appliances and I never recommend Dacor ovens because of all the continued problems. Ive never used the self clean feature since being told by a Dacor tech trainer that he didnt recommend using self clean because it would cause the oven to age faster. Wonder how long it would have lasted if I did use self clean? Sure wish Dacor would contact me for a testimonial!

Purchased home with installed Dacor double oven. Oven wouldnt reach set temperature, so replaced control board. Doable, but a real hassle to remove oven from wall opening and label, disconnect, and reconnect 20-something wires. Two years later, the clock cannot take the correct time and oven timers do not work. Only fix: replacing the $300 control board again. I cannot recommend that anyone purchase these appliances as the control boards simply do not work for more than a couple of years.

Dispenser spits out ice cubes onto wood floor everyday. Told it is design issue and nothing can be done. We have to constantly check the chute is empty after used but we can be nowhere near the fridge for hours and hear ice pop out onto floor. My grandson has tripped and fell and me also. Im more concerned for safety than anything. Also our hickory wood floor is concern.

I have a Dacor 27 inch wall (model EOR) oven which I bought 2 years ago, along with a micro and a warming drawer. Since then, the control panel has been replaced twice. Both times because, after using the timer mode, the beeper would come on at all hours of the day and night. In both instances, I had to cut the power to the oven until the replacement part arrived. I am presently waiting for the third panel to arrive. Today I needed to bake something, so I turned the power to the oven back on. Now it will only function at 350 degrees and only in the bake mode. No other numbers can be put in and nothing happens when I select convection. So far Dacor has absorbed the cost of the parts and repairs, but that does not mitigate the hassle of having to wait upwards of 2 months for a part each time this happens.

As I have read in most of the reviews, we have also experienced the control panel on our 30 inch dual range cracking over the years. We were told not to replace it because it would continue to happen. Ok, lived with that... Now something new has started to happen, the plastic handle on the oven door and surrounding area has started to melt. It got so bad after a self clean that it is collapsing. Now there isn’t much of a seal at all when the door closes. The stove isn’t brand new, but this has to be a fire hazard, and consequently, now the oven will not even turn on. I’ve reached out to Dacor with no response yet. I’m done with this company!

Ive had this range for two years and am replacing the control panel for the second time. 1st time during product warranty and second time out of warranty. The range is beautiful but apparently the electronics are bad. And to add insult to injury Dacor doesnt stock replacements but has them assembled when needed. Estimated wait time for a new panel is 3 weeks; so no oven for 3 weeks and now not a lot of faith that the new board will be any better than the last one.

We bought our new Dacor CPS 130S wall oven when we built a new house in 04. First we had to replace the lower heating element. Now the touchpad (Dacor part # 13290S) is malfunctioning. The + button will not respond to touch. Called Dacor and was told that the needed part number was discontinued in 2009. I double-checked with a distribution center in San Antonio, TX, who confirmed that the part is no longer available. They referred me back to Dacor on the chance that Dacor would have one somewhere. Dacors suggested solution was that we need to buy an updated completely new oven, which would cost us several more thousand dollars. So here we sit with a perfectly good oven minus a touchpad to control it correctly. So much for buying reliable, U.S. made products and receiving good service. I thought there existed a federal law that mandates a company must make parts available for 10 years if they discontinue the product?

Dacor ERD30S06CHLP 30 Inch Epicure Series Freestanding Dual-Fuel - I am so dissatisfied with this product. We bought the first range in 2003 and were so excited to use it. We chose Dacor over Wolf. From the beginning we had issues with the oven. It cooked very unevenly and the door never closed properly. We had a service call and they basically told us that we got a lemon. They offered us a new range for $3.5K. We thought we got a lemon so we agreed and paid for a new one for $3.5k. We also purchased the extended warranty for $2.2K.0 This one was even worse.One time I opened the oven and it burned my eyelashes. I wrote and complained with a video of the explosion and had to pay for the service call. I wrote a review in the website and they deleted it. We now own a range that we have paid over $10K that bakes unevenly, electric element does not work in oven and have minor explosions from time to time with a door that does not close. We have a few friends who have asked us about our range and we always recommend against it. We are looking for a new range. I would not recommend this range. I thought we got a lemon. But it seems thats just the product.

Warning: Warning, safety hazzard for all, adults and children. Recommendation: The knobs should be set on the top of the stove, not the front where children can reach. Control knobs should click when fire and gas is turned off, and highest flame setting should be at the end of the turn just like a clock. I inherited this range as new owner of the house. Today I used the high flame option of the gas stove. When I was done with cooking, I turned off the gas according to the knob position, front of the turn. Later I discovered the range was not exactly off. It was still hot but no flame could be seen.I checked by sight the control knob position, it was set incorrectly in off. Then I touched it and realized the knob actually has a bit more to go to the end, slightly before the off position. Therefore it continues to release gas with unobservable flame. This knob does not click when user turns it to the off position. It is just a silent knob with an inaccurate cue of a heavier black line for off and on indication. Besides, high flame setting comes at the beginning of the turn of the knob rather than the end, it is counter intuitive to our mind of increase heat by turning the knob further on, like our clock. Oven racks are hard to put back after cleaning. Once a rack almost tumble out while food was sitting on it.