Dacor Double Oven Model D0230 - I have had my oven since November 2011. I purchased an extended warranty at the time of buying the oven. Right after it was installed, I called and said they needed to come and adjust the temperature control. It was off at least 50 degrees. It never held the correct temperature. Since July, we have had to replace 2 relay boards, two other parts that should take care of erratic temperature. Then I noticed the gasket was turning black in the corner and my glass pack in the window was steaming up and not clearing. The extended warranty would not cover the glass replacement and I was charged $126. They said it was cosmetic, but this was so bad that I couldnt see through half the glass. The steam stained the glass and you could not clean it, because it was inside two pieces of glass. Do not buy a Dacor oven. In 38 months I have so many repairs that I have lost track.

We have 3 Dacor appliances that we purchased new when we remodeled our kitchen a few years ago. Our cooktop’s igniter continually clicks even when it is not in the light position. This only happens on the front 2 burners (the back 3 are fine). We have cleaned the unit and cleaned the igniters over and over. We have had 2 authorized Dacor service companies and another company look at our unit. Two said no fix exists; the other replaced a part after talking to Dacor and that did not fix it. When I called Dacor, they noted to get another service company and call them when they are here. I am concerned that this again will not work and I will have to pay another service fee.When they were here I asked them to replace a light in our double oven, but they noted they would have to remove the oven from the wall to do that and it would be costly, to which I said no thanks. Is it true that the oven has to be removed to replace a light? Another issue is that our double wall oven’s upper unit only gets warm to about 200 degrees. Another issue is that the microwave door open button does not move the door, we have to push it and pull the door open by hand. I have turned to Dacor service and to our local service techs and we are at our wits’ end. Any help here?

I purchased a column, panel ready fridge and freezer. There was a promotion for 10% rebate, which took me 3 months of emails to obtain and they only issued a partial rebate even though I supplied them with proof of purchase. The service was dismal. The app for the cameras and interface with the appliance hasnt worked the whole time I have had the units. They look pretty and work ok as far as cooling, but for the price they charge they should provide exceptional customer service and being that Samsung owns them you would think that the app would function.

Dont waste your $$ move on to another MFG. I have owned this dishwasher for some time it never worked anywhere near what I paid for it. The glides fell out of the racks. It never finishes a cycle. I have spent $350 for repairs three times and it is still way less than satisfactory. Move on, try a Maytag, Bosch or Miele. Also parts are astronomical and you will need them. If you are thinking about buying this brand google it and read on. We all have the same opinion of the Dacor Dishwasher thumbs down.

My dishwasher - I used to totally rinse my dishes before putting them in to the dishwasher. No more, not necessary. Does a fantastic job. My refrigerator is amazing. Very roomy, love the individual crispers that keep my veggies perfect and my lunch meats and cheeses perfect. Also, love, love the bottom drawer freezer. Easy to access ice and frozen items. My range is amazing. I love to cook with gas and bake with electric. I bake a lot and this oven is a dream. The green clean feature is long overdue with ovens. Not harsh and cleans beautifully. Bottom line – I’m totally a Dacor fan.

We purchased a Dacor dual fuel oven range in 2008 in conjunction with an extensive kitchen remodel. It was beautiful and expensive. It has had innumerable problems. 2008: One of the igniters broke requiring replacement. 2014: oven stopped working, required new relay board. June 2020: Relay board again broke, oven stopped working. December 2020: Oven stopped working, heating element broke. These were serious problems each resulting in 1-2 months without an oven as the parts had to be special ordered. We have not had an oven since December 2020 (it is now March 2021). We are waiting for a replacement part. In addition, minor problems included a broken indicator light and burner grating. Dacor customer service was only moderately helpful, referring us to local repair companies that had difficulty obtaining parts. Dacor has told us that this should last decades but we are seriously considering replacing it after 12 years because it is very unreliable. I would not recommend a Dacor based on our experience.

I purchased a single wall oven in 2008 and 30 days out of warranty, the oven broke. Service required two service calls to fix the door magnets. A third visit was required as the oven codes shut down the unit. The last two service calls have been with the cooling fan. Now that the fan was replaced, the relay board needs replacement, too. I have spent $650 in service alone, which is separate from the cost of parts. There’s no help from customer service; in fact, the rep was downright rude. I will never purchase this brand again and I have told anyone who will listen not to purchase.

We used a new Dacor range vent only to have it go on and off. We called Dacor and they referred us to Desert Tech in La Quinta. The owner came out and said we needed a new unit for $775. We said just unplug it. He charged us $275 even though it took him less than 30 minutes. Stay away from Dacor AND Desert Tech!

I could have written every one of these negative reviews. Ive had all the same issues with my Dacor Epicure oven. Faulty computer panel, failed motor in the downdraft fan, oven not maintaining temperature (meaning NOTHING cooks correctly in this oven), burned out lower element and discolored interior. And let me add that the interior oven fan stays on for about half an hour after you turn off the oven. What purpose could that possibly serve???? Suffice it to say that this is a poorly made product by a company that has no desire for repeat customers. I am currently working with customer service to try to get my oven working for Thanksgiving, but I just dont have much hope after reading all of these similar issues. Clearly, they manufacture a sub-standard product and sell it at premium prices. Nice business model, for a while.

Dacor refuses to take responsibility for defects in their products. Our wall oven required two cooling fan motors and two relay boards over a relatively short period of time. In addition, all of the sensors had to be hard wired when the oven stopped working, and our service technician was informed by Dacor that moisture tended to get into the sensors on these ovens. We spent nearly $1500 on these repairs. Reaching a customer care representative at Dacor can take upwards of 20 minutes. Phone calls are not returned. Customers are left to pay the cost of defects in Dacor products.

I was and, I repeat, was a loyal Dacor customer. I gutted and rebuilt a kitchen 9 years ago and purchased a Dacor stovetop, oven and microwave. I remodeled my new house 5 years ago and again purchased Dacor stovetop, oven and microwave. Consumer reports provided favorable reviews of the appliances I purchased below.First red alert: The oven Model MORS130S and Microwave Model DCM 24S LED did not match. The microwave was green; oven was blue. The brochure was in black and white so there was no way of knowing that aesthetically they were a mismatch ... it was very sloppy(!) and very deceptive by Dacor. I mean when I waited weeks for my appliance order and the oven is already installed with a big fat ugly LED screen, what was I supposed to do, yank it out and start all over again? This was disappointing!Next, I was simmering chili on the stovetop (5 burner, gas) and, lo and behold, 18 flames started exiting through the turn knobs resulting in a meltdown. The gas was leaking through the tubes underneath the stovetop. I just happened to check the chili while I was gardening to watch the house almost burn down and btw, it was difficult to put out the flames because the natural gas was leaking under the unit. Seriously! I called customer service and they got hopping right out to fix the issue. This scared the heck out of me. It is negligent to have a product like that on the market.After about 13 months into the life of the Model MORS130S oven, the touch panel failed emitting a CO1 error message. I was told it was $140 to fix it and that the panel was defective, great quality there, Dacor. And the added joy to the CO1 error message is that the unit beeps intermittently all day and all night long unless the power to the oven is killed. Joy... now another issue - Model MORS130S oven LED lights are burning out. Seriously, what else will there be? Now its $175 for LED panel and another $100 to install by an authorized Dacor service man.So I called Dacor back again today because the LED light out was annoying me. They offered nothing. To be fair, my appliances are out of warranty but seriously, Dacor nearly burned my house down. They should be winning me back as a customer if they really cared about their customers and having long term repeat business. Never again, Dacor, never!

From the beginning, August 1997, 17 years ago, I was not able to use my oven after self-cleaning. The problem was never resolved after countless service calls totaling over $1500. Aside from the cost, I was inconvenienced every time I cleaned my oven, as I was not able to use it until it was serviced, about a two week wait. I contacted Dacor early on and they reluctantly agreed to extend my warranty for a year. They did nothing beyond that, and my oven still shuts down after self-cleaning, which I hesitate to do at all, until it is beyond needing cleaning! The circuit board was replaced and recently the cooling fan was changed, but....no luck. Buying a new oven is not an alternative, as the oven performs well in every other way and I simply cannot afford one. I cannot believe a company of such status is not interested in satisfying its customers.

I own a complete Dacor Kitchen, with many appliances. They are the highlights of my Home. Great features: fast induction cooktop with an efficient silent hood, versatile refrigerator, reliable oven, and of course the always dependable dishwasher. This is My Dacor Kitchen!

I purchased a DACOR Discovery IQ Range one year ago Model # DYRP36DS/NG from an online authorized DACOR retailer. Here is a synopsis of the events Ive had with the range over the past 12 months: I took delivery of the Range in January of 2016 at my home under construction. I moved into the home in April 2016 which is when the Range was fist installed. In May I began to have problems with the unit, it would shut down during preheating, then reboot itself, sometimes it would just reboot itself randomly. I called DACOR customer support who told me that I needed to download the latest software version, which I did. Shortly thereafter, the Range again would shut down during cooking and go into a reboot cycle.I called DACOR again, they sent out a local service company. In June the technician came out and upgraded and re-installed the software. The problem continued, I contacted DACOR AGAIN, got the run around, etc... Escalated the problem. DACOR then determined the problem was in the internal circuit board which they arranged to shipped to local service company. The service company came out again, replaced the internal circuit board and attempted to upgrade the eProm, which didnt work. The Range was in a constant state of rebooting itself over and over and over again. The Technician left. Said nothing more he could do. I had to shut the power off so the unit would stop rebooting itself.I called DACOR AGAIN, I got a complete run around, they refused to do anything more. I finally was able to reach the V.P. of Customer Service. After a few conversations and investigation into the issues. She determined that the unit needed a new front controller panel. The panel was shipped to the local service company. The service company came out again and replaced the front controller panel. Its now November. Over Christmas, the unit began to shut off the oven randomly during cooking cycles, for no apparent reason. Over New Years, the oven was shutting off, flashing an error code and reboot! I called DACOR last week. They refuse to help because now it is out of warranty.Ive contacted the online retailer. Ive left messages at DACOR for the Service Manager and the V.P. of Service. NO RESPONSE. So this is how DACOR deals with servicing their high end appliances, keep trying to pretend to fix the lemon appliance until the anniversary date, and then they dont have to deal with their $9,000 piece of garbage high end range any longer. The consumer gets screwed and DACOR doesnt care in the least! DO NOT BUY an appliance from DACOR.

Years ago I purchased the Dacor Double Oven over a Thermador because the Thermador had a ridiculously long pre-heat time. The Dacor has performed reasonably well as a oven particularly in convection-bake mode. But over time, components started failing and repair parts were hard to find, unavailable or ridiculously overpriced. I am an an engineer with DIY skills honed from years working with high tech food manufacturing equipment and controls including ovens. In recent years, I have needed to replace a relay board, the main control board, hinges two times, and most recently the hinge receptacles. I have also replaced an inner panel on a door assembly. Just think what such repairs would have cost for an average consumer. I understand the parts can fail, but Dacor has shown little regard for consumers in my opinion. They have done very little to maintain an inventory of repair parts. Basically their message is that the part is now obsolete and unavailable. Thats some answer when the price of a new double oven is multiple thousands. Recently, the hinges on my upper oven failed again. As they failed, their failure caused increased wear on the hinge receptacles. Soon the receptacles failed as well. I was able to find hinges at a ridiculously high price but the receptacles were unavailable anywhere. I contacted a several parts suppliers who told me that they had no idea when the parts would be available. Moreover at least two of the suppliers mentioned that they had a backlog of orders for the receptacles - one had a backlog of over thirty. Yikes!. At that point I contacted Dacor customer service and asked what could I do to get the part. Answer: The part is unavailable and we have no estimate on when it will be available. I tried to escalate my request and got nowhere. Finally after many hours of online searching, I found one set of the hinge receptacles at a price 4X last years price. Lastly as I replaced the receptacles today, I realized that the mounting screws only hold one portion of the U shaped mount. If the screws were longer, the receptacle would be less prone to twisting and wear. Be aware that Dacor was sold to Samsung a few years back. Based on my experience, I could never recommend Dacor. Caveat Emptor!

Updated on 01/25/2021: After my review in December of 2020 I have continued to fight for a resolution with Dacor. Dacor appeared to be unable to resolve the issue and sent the issue to parent company Samsung. Samsung set up an appointment for repair then cancelled it saying parts were not available and that they would authorize a refund. I supplied the invoice and filled out all necessary documentation, including my banking information so they could wire the money. Today, a Samsung representative called and said I needed to talk to Dacor to finish the process, even though I was told everything was approved.I called Dacor and to no ones surprise they said this would have to be approved and only one person can make that decision and they are hard to get in touch with. Oh, and by the way, 10 days ago the second oven failed. Yes, the large oven that did not work when I purchased the unit. It was repaired in September and has already failed again. I now have a double oven Dacor range and neither works. This week begins my 10th week of fighting with Dacor for them to honor my warranty (again the unit was installed in August 2020) or refund the purchase price. At this point the range has been out of commission half the time I have owned it. I strongly suggest you heed the warnings here on this site. I wish I had listened.Original Review: On August 3, 2020 I purchased a 48 Dacor Gas Range. It was installed a couple of weeks later and the large oven did not work. It took better than a week for Dacors authorized service company to come out and diagnose the problem. The parts took another week to be shipped and then another week to have the repair made. It was a defective thermostat that was preventing the oven from igniting.Fast forward to November 24. In preparing for a big Thanksgiving, we turned on the small oven, only to find that it did not turn on. It had the exact symptom as the large over and would not ignite. I reached out by email to the agent at Dacor who had worked with me before, only to receive the below response: Thank you for contacting Dacor – We are no longer able to provide support by e-mail. Please contact us at U.S. Toll free: 833-353-5483 we are happy to provide personal support.Now begins the worst customer service experience of my lifetime. After opening a case, I have now talked with a dozen different agents and have yet to receive a resolution to my problem - a range that cost over $7,000 that did not work out of the box and has now failed again in a three-month period. I have spent hours on the phone and on hold and was eventually directed to Samsung on December 9 because Dacor could not get the parts. Samsung promised to refund the purchase price of the product is the parts did not come available by December 16.December 16 rolled around and now Dacor is saying that Samsung made the promise, but that they are different companies. Remember, Dacor directed me to Samsung and Samsung does own Dacor. I have been told that the parts for my oven are no longer available. After continuing to push the issue I am told that it is now in management review but that it may take 2 weeks for a decision on my case. It has now been nearly a month since I opened the case and I appear no closer to reaching a resolution on my failed Dacor range. I have asked to speak with a manager, but I keep being told this is not possible right now.I do believe that Dacor is in breach of their warranty. I have been more than reasonable in allowing them to remedy the situation. Since this was installed just over four months ago, it has been out of service in one of the two ovens for a total of 7 weeks. For anyone considering the purchase of a Dacor appliance, I strongly caution you to read the reviews on this site and other sites. If you are lucky and get an appliance that works and never fails, you might be happy. If you ever have to invoke your warranty you will hate your life. I regret that I did not heed the warnings. It is truly unbelievable to me that in 2020, any company can stay in business when they display such disregard for their customers. Be warned.

This range has never cooked anything well, overlooked and undercooked. Several technician visits, board replaced, thermostat replaced, starts error messages and clicking all on its own. Recently the cooktop has exploded with a big BOOM 3 times. We finally turned off the gas and Im cooking outside with the camping stove and BBQ. I am so upset about the explosions that I am shaking. Today it exploded while all knobs were OFF. Im thinking about getting an attorney. IF my house caught on fire my insurance would not pay unless I do everything in my power to mitigate damages. No gas should work, but I would like to be able to cook in my beautiful kitchen with my granddaughter. Help!

About a month ago then again 2 weeks ago, I would hear a beep (not while I was cooking) from the stove. I went over and all elements had turned themselves on at HIGH. The only way I could turn them off is to repeatedly push and hold the child safety button. Very scary! If I had left a pot or pan on the range top, who knows what would have happened. It did it occasionally with 1 burner twice more. Yesterday, the range top started cycling every 90 seconds, on then off, then on, then off. I shut it off at the circuit breaker twice thinking this is a way to reset electronics sometimes. Once for 2 minutes then again overnight.I tried cooking on it this morning: on and off and on and off again. It is shut off at the circuit breaker awaiting repairs. I am a renter so am spared the repair bill but not being able to cook (of course it happened on Easter weekend!!) is a major pain. It is 10 years old this week the landlord told me, but I used to cook on a stove that was 60 years old and it worked like a champ.

I wish I had read all these reviews of Dacor products before being duped into paying for a high end wall oven. As many others have mentioned, the electronic panel design is faulty. I paid $1000 to have it replaced once. Now it is broken again and the alarm beeps constantly. The reply from their service rep was that they havent had any recalls of this product (in other words, no ones house has burned down yet). He also admits that he wouldnt buy a Dacor oven unless he had money to burn. Well, my money has already burned and so have I.

I purchased my Dacor Epicure Range 8 years ago when I remodeled my kitchen. My other appliances were made by GE and Bosch. Ive had to service my GE appliances a couple of times in the last 8 years, but it is the Dacor that has given me the most grief and it was the most expensive appliance purchased. It has never been reliable with regard to convection baking. Initially I thought it was my inexperience with a convection oven. I read everything I could get my hands on and kept trying...after talking with a friend who does quite a bit of baking I realized its not me, its my oven. Then the real problems started. First it was the broiler/ignitor, next it was the membrane in the keypad. Two months later it was the relay board and this time it was the broiler/ignitor....Again! Started calling Dacor when the relay board went out because at this point I had spent $1,000 on repairs....after I had paid $4,000 for the range itself. For the last two repairs Dacor has paid for the parts, while I paid for the service call and labor. This has reduced the cost of my last two repairs by about 50%, which is very helpful. However, Im still very disappointed in the product. I spend a good deal of time in my kitchen and do quite a bit of baking, cooking, and canning. I thought that if I spent more money and bought a high-end appliance, it would serve me well. At the rate that Im going, I will need to purchase another range, unless I want to keep throwing money into repairs on this one, which I dont. I will not ever purchase (or recommend) another Dacor product again.

I completely gutted my kitchen on 2/22/92, and purchased a Dacor CPD230R double oven. Whenever I used the self-cleaning function the next day, F0 would appear. I would have to get a repairman to come to my house. This cost me a fortune. For one year, I just used the bottom oven. I finally called Dacor, and complained. I wrote a letter to Mr. **, and wanted satisfaction.They decided that I could purchase a new, better oven for $1,480.00. This was 1998, so in 6 years, I spent $3,680.00 for 2 ovens. After 5 years, I started having the same problems. Every time I used the self-cleaning function, F0 would appear. I just totaled my bills for the new, better oven, and I have spent $963.00 and it would be more, but I figured out, if I pressed cancel and held it, the F0 would disappear. So every time I used the oven, that is what I did. This would last for 8 months. The oven completely shut down, and I could not use the top or bottom. I just had a repairman here, and he said i need a new membrane assembly, and latch. They were supposed to call me with an estimate. They just called, and said the part is no longer available. This is upsetting. Reading the reviews, I see I am not alone in my dissatisfaction with the Dacor oven. Now, I will be redoing my kitchen.

In 2013 we remodel our kitchen. I need a 30" stove and Dacor seem the right fit. I had problem with the igniter burning on that stove and some metal warp as well. They replaced the stove in 2015. I smell gas every time I turn oven on. Last Thanksgiving 2019 the stove stop working. I was told the igniter had burned out and had it replaced. I had repairman come twice because of smell and end January 2020 the stove stop working again. The repairman told me that a jet burner assembly was never installed this is why I smell gas after it is turn on. ** They said they will order the part. It's back order So I contact Dacor. First they told me it's back order then give me a supplier. If it was never installed in the unit shouldn't Dacor take care of it and soon.

I am amazed by the sleek look and design of the new Modernist refrigeration Dacor has to offer. The built in column pairing is my favorite with all stainless steel interior, tempered glass, and LED lighting that WOWs anyone who opens the door. The water dispenser is flush against the interior wall of the refrigerator and the freezer can offer two ice makers, one for regular ice and one for your high end cocktail drinks. These units are PURE LUXURY and HIGHLY RECOMMENDED!

We equipped a luxury kitchen with Dacor appliances. Had to replace the 60 inch dual fuel range after 8 years - use the same brand simply to match. Big mistake. Several repairs already. Also installed two under the counter warming drawers - nothing but problems and repair expense. Now we need a small $25 part - a cooling fan with motor that is faulty. Was informed the part is no longer available - customer service told me well, it is 10 years old. Really? We now have to rebuild part of the kitchen cabinetry and spend several thousand to replace two warming drawers? They also said the company was too small to keep parts available for a long period of time. Unbelievable! I will never buy Dacor appliances again.

We had our whole kitchen renovated and purchased Dacor appliances through Caplans Appliances. We purchased the appliances in the summer of 2019 and they were shipped shortly after. Since our kitchen was still under construction the appliances sat in our home. They were installed the second week of November. Two months ago, I woke up to a sucking noise from the dishwasher. The dishwasher had a code of LC. We removed the custom kick plate to realize that there was water damage. Dacor has been contacted on numerous occasions regarding this and the dishwasher continues to leak. We have had 5 service calls to house and the problem persists. The seal has been replaced twice in a 2 week period. The repair company HARGTA gives us a window and does not show up at that time causing me to sit around all day waiting for them and then some days having to cancel work. Dacor customer service continues to say the Regional Tech Manager will be the one to provide the resolution and we have not heard from them yet. The reviews on here clearly indicate that the dishwasher leaks. We are risking damaging our floors which were put in at the same of our renovation. Looking for a resolution ASAP. To those considering Dacor appliances do your research.

DONT recommend model #MOH130. We were so impressed with the options that this oven came with. Sadly, with all the bells and whistles also came a ton of repairs. After the 4th repair, our service rep said the relay board needed to be switched out. (Half of the service men who came to my house seemed to be grasping at straws trying to come up with an explanation why the temperature was fluctuating, or why it took so long to heat up, etc.) Then I get to wait 2 weeks for a part to be ordered/arrived and re-schedule service. Last week got code U22 - oven wont even turn on. This oven is only 6 years old. NO THANKS - NEVER AGAIN will I buy anything from this company.

After less than a year after installation the oven continues to operate poorly. Its been recalibrate twice and a new control board installed. Did I mention the board had burned components? It still does not operate properly. Its at least 25 degrees off. Everything takes way longer to cook than it should. Thanksgiving was 2 hours late. Christmas was the same. Entertaining during the holidays, embarrassing. Now Dacor wants pictures to prove to truly see how poorly the oven is operating. I thought I bought a quality product but I was wrong. This is just following suit with the Dacor refrigerator I purchased and was replace months later.

This will be the third service call on my Dacor Built-in Refrigerator with the freezer making icicles and the fan making a loud noise. On top of that, I have two light bulbs in the freezer that went out from the ordeal. From my review of the complaints here on Consumer Affairs, I see Im not the only one with this issue. This is a yearly problem, and I hope Dacor would step up and resolve this for me since it truly is a poor design issue and no fault of mine.

I purchased a 48 Dacor Epicure stove in October 2010. We moved into our home in November just in time for Thanksgiving. We remodeled the kitchen and the stove is the focal point. When I heated the two ovens, the pre-heat mode stayed on but the ovens went to 600 degrees plus. My oven thermometers only read to 600. That happens every time and the fans stay on for hours. After many service calls, we have determined that the oven is going into a cleaning mode every time and is wired backwards. Dacor is ignoring me.

I bought my Dacor epicure 36 duel fuel range in 1998. First stove: oven door did not close, spark modulator out. They tried to fix it but failed. They sent me a new stove. #2 stove: same problem with spark modulator. Couldnt use any burner without the constant clicking. Oven didnt bake evenly. Complained. Stove: #3: same problems. Dacor sent me a letter to grade them on their stoves and service. I blasted them. They called me and ask if I wanted my money back or another stove. Stupidly I took the stove. This was 5 years since the original purchase. Ive had this stove #4 for 13 years. Door is and always has been unable to close. I use a stick to close it. Now the relay board is out. Frankly I so love the looks of the stove and I cant afford to get a new one. Original was 5200. Now they are 6700 and I would probably have the same problems. So I am going to try and fix this stove myself. I will never buy Dacor anything ever again, even if I could afford it. When they offer your money back, take it. The service was responsive although didnt solve the problem through 4 stoves. I would gather from that, the design is bad. My mother has a old 1940 gas stove that still works. Gas stoves should not be that complicated.

We were out of state from December 21, 2014 to January 2, 2015. The condition of the refrigerator was discovered at about 9:30 PM on Saturday, January 2nd. Upon opening the door the Dairy Compartment Cover fell to the floor. We could immediately see the damage but did not know the source. As a result, the unit was turned off. The owners manual was consulted along with a review of the Dacor website. The office was closed on the weekend so Monday was the earliest we could obtain names of Dacor authorized repair agents in the Phoenix area. A authorized Dacor repair technician stated the light switch or light circuit in the board failed. The interior light bulbs located at the top of the refrigeration side of the unit remained on when the refrigerator door was closed. The heat generated by the continuously lit bulbs led to the melting and charring of the plastic light fixture. The light socket melted, the wiring harness melted into the socket assembly, light switch, and control panel. The heat was intense enough to warp the Dairy Compartment clear plastic cover, some of the adjustable door bins, and the interior door liners. Also, all food containers made from plastic such as salad dressing bottles, mustard, ketchup and mayonnaise, etc. were disfigured. Of course all the contents from both the refrigerator and freezer had to be disposed.Before leaving on an extended trip we had been following the instructions preparing for a vacation listed on page 19 of the owners manual. On our departure date the food that would not have lasted more than two weeks was removed from the refrigerator. The ice bin was emptied and the wire shut off arm was raised to the OFF (O) position. Note, page 19 does not mention to set the Sabbath mode when leaving for a short or long vacation. We were fortunate that the damage was contained within the refrigerator.

Our initial dishwasher had many problems. After several service calls, we called Dacor to identify the issue and see if there was anything they could do for us. We received a brand new dishwasher (even better than the initial one) for a nominal cost. We would like to thank Dacor for their excellent service and attention. Its not always the issue, but the resolution that makes the difference.

I bought a Dacor Epicure 48 range in 2003. It has never worked correctly. I read many other complaints on this same range. I had the burners replaced and I still have to light them with a match each time I turn them on. The oven temperatures were never correct. Nothing bakes properly even following their directions. It bakes very uneven. The hinges are sprung/broken (as the doors are too heavy for the lightweight hinge they use). I have had numerous service calls over the years and still not a good oven or repair. I too am very disappointed in the fact that this product is a lemon and they will not replace it.

We remodeled our kitchen 2 years ago but didnt upgrade our refrigerator because our old one was still working. My wife and I always wanted a Dacor refrigerator. We like their design. Our old refrigerator finally died after a little a year after our reno. We were sad but happy at the same time because we can finally go buy a Dacor fridge weve always wanted. We shopped around and compared Dacor, Sub-Zero, and Thermador just to make sure Dacor is for sure what we wanted. We chose Dacor and we couldnt be happier. Its been almost a year and we still love our Dacor fridge. Now we will just have to wait until our oven dies to get a matching Dacor one.

I am thrilled with this stove. I have always had a vertical double oven so this is a first for me. Really pretty in my kitchen. Almost like a piece of furniture. Can’t wait to start cooking!!

Dacor 48 dual fuel range - Only 3 years ago, we purchased a Dacor range that is beautiful and worked great for 2 1/2 years. During the last six months, I had the led lights go out on some of my cooktop knobs and my oven has started not baking evenly, much as described in a previous post (half of your cookies can be burnt and the other half dough). A serviceman has been out twice and I have been made to feel that basically, I dont know how to use this oven or dont know how to cook. Funny that has only been in the last 6 months. I cooked great with the range for 2 1/2 years and have 20 years of cooking experience, but obviously, I dont know what Im talking about. To replace a led light bulb, I had to purchase a $300 control board part (that Dacor did discount) plus a $100 labor. It ended up being a $250 light bulb fix that has exploded to a potentially additional $600 problem. When taking off the range lid to replace the lights, I am now told that 3-4 burners have to be completely replaced and this again is my fault somehow because the metals fuse together and that is known by Dacor to happen, but my service tech said its because I dont clean my range well enough. This still makes no sense. And to fix the oven problem, it might be the control board? Lets throw my money at it and see? All guessing, the serviceman, Dacor, etc.! So now Im stuck with a parts bill of over $1,000 (Dacor did discount this to about $300) plus $200+ in labor, another guess. This just seems ridiculous to change a light bulb and guess at an oven fix for a 3-year old range that cost as much as a car! Im so irate over the whole issue! What a mistake Dacor was.

After purchasing what I thought would be ovens of a lifetime I could not be more disappointed, frustrated and angry at a company in my buying history! Since November of 2014 and longer I have been fighting for service or answers or at least honesty! The ovens have never worked properly, they do not keep temperature. The oven temperature drops 60 to 75 degrees while cooking over a couple hours. The control board was replaced. Still the ovens never worked. If you like to cook and cook for the bed and breakfast, which is why you bought an oven like this, you will have your ovens on for a couples hours preparing any multi-dish meal! I was treated rudely on the phone during routine troubleshooting and was never allowed to speak to a manager. Dacor for months or so later is buying back my ovens minus a restocking fee, on ovens that dont work, $1200!

Two years ago, we redid our total kitchen at considerable expense. All of the appliances we replaced were made by Dacor. They included: 1) a 36-inch refrigerator model EF 36/wf; 2) a dual wall oven, model EO230SCH; 3) a gas cook top, Model RGC304; 4) a dishwasher, ModelEDWH24S and; 5) a range hood, ModelEH3012SCH. The problems started within a two months of installation. The refrigerator stopped running due to a relay failure and a compressor problem; both were replaced by Dacor at no cost to us. It was inconvenient but not costly. A short time later, the lower wall oven stopped working as well as the lights in both ovens. This required the replacement of the main control panel (control circuit board). Dacor paid to have it repaired. The clock does not keep accurate time and gains about an hour a day. We decided to leave it well enough alone and did not have it fixed. After the one-year warranty expired, the lower oven quit again. This time, it had to be removed from the wall and an exhaust fan in the lower oven was defective and had to be replaced. Dacor’s initial response was it was out of warranty, so it was up to me to cover repairs. They eventually agreed to supply the part (about $90) but we had to spend several hundred dollars to install. Now, the lower oven takes an extremely long time to heat up, and again we decided to leave it well enough alone. Recently, there was a loud flash in the vent hood; one of the bulbs apparently burned out. My wife tried to turn off the lights in the hood but the light switch apparently blew when the light went and could not turn them off. After a couple of burned fingers and a melted bulb removal tool, I managed to get the other bulb out. A call to Dacor got the usual out of warranty response. I called the local Dacor authorized service rep. He looked at the problem ($95) and said he would have to call Dacor. After he talked to Dacor, they called me and said they would send a replacement control board but would not pay for the service calls. The service company said the next service call would be $195. One light bulb burned out: cost $290. I suspect that every hood unit that Dacor made with this control board is also defective. We have had to replace the halogen bulbs with great regularity. We have halogen bulbs in our boat that have lasted at least 15 years. There was another complaint on this board that had a similar problem with the vent hood. He decided to fix it himself. He is an Electrical Engineer his comments are worth reading and speak to the inadequate design of this unit. It is a shame that the Dacor appliances appear to be near the bottom in terms of reliability. Consumer Reports that their gas cook tops appear to be the least reliable. It looks like I have something to look forward to. Needless to say, I cannot recommend Dacor to anyone. In fact, I would recommend that they not purchase any Dacor product that does not have a full multi-year warranty.

This is a follow-up comment from my last post dated June 21st 2011. My local appliance company, where I purchased this oven, seems to have helped with their recent fix. I was able to bake a white cake, following the box directions, that was not burned on one side and raw on the other; it was okay. With fall arriving, I will be back in my kitchen and will be using my oven. I will keep you posted. I still would not recommend this oven to anyone, and will not purchase any future Dacor products.

We moved into our home in July 2012 and have had nothing but problems from our Dacor refrigerator which was manufactured and installed in this home in 2007. The appliance repair company has been to our home approximately five times in the five weeks since we moved in. Initially, the problem was with a leak in the cooling system which took the technicians about 16 hours over three visits and $1,400 to sort out. Currently, we have been without a visit from the techs in two weeks (our longest stretch since moving in) and the refrigerator is leaking from the ice dispenser and making a motorized noise so loud. Initially, I thought a motorcycle had pulled into my kitchen. Needless to say, the technicians are on their way back.

Motherboard on my favor wall oven has been replaced twice. Repairman said not use the self-cleaning feature as that will cause too high of heat and melt the components. Seriously, Dacor? We spend this kind of money and have these type of repair issues constantly. Just glad I finally was told what might help resolve this - I’m ready for a new oven because of all these problems.

We chose DACOR (8-burner double oven top of the line ERD60S06CH/LP) in 2006, new construction because we disliked the signature blue interior of another luxury brand. Last October I detected a gas leak from one of the burners. The authorized repair company was contacted, and the entire unit - all 8 burners and both ovens were out of commission while we waited for the replacement part. Six weeks later the repair guy returned with the wrong part. We had to wait an additional month for the repair guy to return. Apparently, not important that people might want to cook and bake before the Holidays! After the new valve was replaced the oven light began to turn on when any of the gas valves on the defective side was turned on. I write this review 8 months into the problem. I can fix for $700 by ordering a new control panel. I wish I had read these reviews earlier. I overheard the tech say that there was electrical interference and that the wires need to be insulated to stop the oven light from turning on and off. I am so FED up with both the Dacor California head office not caring and the horrible authorized service company. I will take this unit apart myself and fix it. DACOR IS GARBAGE. Go with Sub-Zero, Miele and forget this Brand. DACOR: Dont Accept Crap Or Rubbish! Made in America? Shame on you. No problems with 4 Sub-Zero fridges, or 4 Miele dishwasher the same age.

Perfect size burners and small oven. Cooks food perfectly about 25° less than you think. Great grill on top. Easy to clean.

I have a Dacor MORS130SS oven that I purchased in July of 2008. After 6 months the first membrane panel failed, one year later the second membrane failed. One year later the third membrane failed. Im on the fourth membrane and now my fine Dacor is burning things!! I can set the temp to 350 and it shows 350 on the display but the lower element never shuts off and whatever I cook gets burned. I bought this oven thinking it might be my last considering the supposed quality of Dacor. I know for sure it wont be my last oven!! I sell appliances and I never recommend Dacor ovens because of all the continued problems. Ive never used the self clean feature since being told by a Dacor tech trainer that he didnt recommend using self clean because it would cause the oven to age faster. Wonder how long it would have lasted if I did use self clean? Sure wish Dacor would contact me for a testimonial!

When the beverage center was initially installed 5 or so years ago, I went to put wine bottles in the wine drawers and surprisingly, the shelves are too shallow to properly hold some of the bottles especially tall Riesling bottles. I contacted Dacor to get some response to the poor design and got no response. Now the unit wont chill and I have just paid a repairman $162 to tell me it is not repairable because the unit has a leak in the refrigeration system and it is within a foamed in area of the system. So after only 5 years, I am replacing my wine fridge, not what I would have expected from a brand that touts itself as being high end. I am very dissatisfied with Dacor and certainly will not be purchasing anything of that brand again.

As a contractor, we were fortunate enough to build our dream home which was completed in 2005. After much research and many show room visits, we purchased Dacor appliances for our kitchen. As the saying goes, if I knew then what I know now. Our biggest (note I said biggest, not only) issue is with our ESC130 oven. If you own this oven, do not, repeat, do not, use the self-cleaning mechanism. I have had this repaired once and then replaced once (along with a relay board). I seldom use this because I know when I do the lock mechanism will continue to cycle until it is replaced. This means, while I can still use my oven, I have to time when I open the door based on when the lock is cycling in the unlock position. I must also turn the oven off at the circuit breaker or listen to the continuous warning beep that the lock is cycling (as if I didnt know).After repairing this feature once, I next choose to have the mechanism replaced and Dacor offered me a discount on the parts (the oven was and still is out of warranty) at a cost of more than $500.00. This is on top of what I had already paid to have it repaired just 18 months earlier. I feared using this feature again as I didnt want a repeat performance. After cooking macaroni and cheese yesterday, I felt I really needed to clean the oven and made the mistake of using the self-cleaning feature of the oven. I dont know why I was surprised when the locking mechanism refused to stop cycling.I contacted Dacor today only to speak with the rudest customer service representative I have ever encountered, Steven. No last name. He is the only Steven who works there. He refused to listen to me, spoke over me when I did try to talk, and did not allow me to speak with anyone else. There are no supervisors available on Fridays and he could not transfer me anywhere. I left a message for someone else to call me (they did not). I called back later that afternoon and was given the name of a supervisor, Nhi. She was not available and I spoke with another customer service representative. I learned that Dacor is aware they have a problem with this locking mechanism and are trying to correct it. This got my hopes up, thinking that the company would now do the right thing and replace this mechanism at not cost to me, or at least at no cost for the parts. Not so. Even though Dacor knows there is an issue with this mechanism and they are supposedly trying to correct it, all they can offer me is a discount on parts. Really? Wow! A discount for a part that you know doesnt work properly and probably wont work properly because they are still working on the problem? I just really dont know what to say. Is this supposed to make me happy as a customer? Would prospective customers want to buy a Dacor product knowing that Dacor is more than happy to sell me a known defective product at a discounted price and they should expect the same? It is probably needless to say that I would urge all prospective Dacor owners to not waste their money on any Dacor product as they do not care about their customers. I will certainly be doing my part to warn others and hope this serves to warn others as well. Dacor has a lot to learn in terms of building even what could be called a good product and standing behind what they sell as well as becoming a customer service oriented company.

I moved into a house that already had a Dacor unit in place. Within months, I discovered that I owned an oven that could be fixed by throwing the circuit breaker. Then, I learned about invisible hands that turned the 325 degree convection oven to a 500 degree broiler. The final act was having all three glass panes shatter and the control panel cracking as punishment for assuming that the oven cleaner on an expensive gourmet stove would function according to manufacturing standards. The repairman ordered replacement parts. He spoke with someone who was off shore so forget about Dacor being all American made. The wrong parts were sent. He has reordered. Meanwhile, I have been without an oven for two months. If this goes on, I am going to Home Depot and buying a Hotpoint or GE. It is the same price as replacement glass panels and the control panel.

I purchased a Dacor double wall oven in May 2011 at a reduced price from a secondary market. Due to cosmetic defects, it wasnt sold by an authorized Dacor dealer. I bought it at what I thought was a fair price, considering the cosmetic defects. When our home was completed in November 2011, we installed the oven but found the oven would not heat up to the set temperature. I was told by the company I bought it from that it would be eligible to be covered under the manufacturers warranty. I called Dacor and was told that since I didnt buy it from an authorized dealer, they would not cover it under their warranty even though I had it under one year. Since I had to give Dacor the serial number when I called it in, they now have a permanent record to that end. I have had no oven because I cannot pay to have it repaired.

We remodeled our kitchen in the fall of 2009 and decided to purchase what we thought were higher end Dacor appliances (stove top, oven and microwave). Well, what a mistake that turned out to be. Considering the price we paid for the appliances, you would not expect problems from all 3. Perhaps a problem with 1 appliance, but problems with all 3 suggest a real quality problem. My first indication should have been when I called and asked how to change the green LED on the microwave to blue to match the nice blue LEDs on the oven mounted right below. I was told that someone else makes the microwave and Dacor just puts their name, and that I should just turn off the LED on the microwave. I dont know if that is true, but that is what I was told.Now when using the microwave/convection feature, the oven makes a noise (sounds like a fan motor) for the first 3-5 minutes then eventually quiets down. A daily reminder of the mistake we made purchasing Dacor. Then those nice blue LEDs on the oven started failing making it impossible to read the clock, timer or temp. Luckily, the oven still works; you just cannot read the LED any longer. This is a constant reminder of the mistake we made buying Dacor as we see the LED every time we walk into the kitchen.Finally, we have the solid surface electric cooktop. Although it works fine, the black paint on the metal trim around the stove top is wearing off. Now, we have some shiny metal and some black trim. This is just an annoyance and honestly, we probably would not have even complained about it. However, with the other problems we have had with Dacor, it just adds to our overall disappointment with Dacor. If I knew then what I know now, I would be a lot happier because I would have GE appliances and not these overpriced low quality Dacor appliances.

We bought a whole new kitchen's worth of Dacor appliances - the Modernist line. It's too soon to review their performance, but so far they work well and look fabulous. Most importantly, I had an issue registering my appliances for warranty. I sent an email and not only did they resolve all my issues, registered everything for me, they also notified me I was eligible for an extended free warranty program, and they set it all up for me without any effort on my part. I wouldn't have even known if they hadn't done it for me. So far, I'd say that they have stellar customer service. When researching online before making the choice to go with Dacor, I had trouble finding information and reviews. I wanted to make sure and share my good experience since all too often people only share when they have had a negative one. I hope this is helpful to someone looking to buy!

I purchased most Dacor appliances when I built my home in 2015. Their induction cook top and dishwasher kept breaking down one by one. The first time the repair service was done well. Early 2019, their cooktop broken down again and I still have the half broken cook top for almost 4 month now. We have been emailing back and forth, firstly Dacor promised to mail me the parts, but then a different customer rep reached out saying I have to take the broken parts out and mail it back to them before they can send me the replacement parts. That means I would have to live without a cook top for a while. There is even no estimation when I will have it fixed!! Dacor dont value their customer and Im comfortable to say it is the worst product quality and service I have experienced in my lifetime. Never recommend it to anyone!!

My husband and I built our home and moved in November 2002. We purchased a Dacor Double Oven, Dacor 5-Burner Electric Cooktop and a Dacor Microwave. After the second year of living in our home, we started having problems with our double ovens. It would start beeping at different times. Sometimes it would last a few times to off and on for days. Then it would stop beeping and not return for a year. Now the beeping has started again and now it is displaying off. It wont come on. We have turned the breaker off and back on because sometimes that would reset it but not this time. Now before I could call anyone out to look at it, my 5 burner electric oven is dead. I called Metro in Tulsa, OK which is where we purchased them and they gave us the name of a repair person in our town. He came out and told us that we needed new boards for both appliances and charged us $50.00 a piece just for the evaluation. Now one week later, he is calling us and telling us that our 5 burner electric oven is discontinued! I dont want to have to purchase a new oven! I will also say that on my microwave, where the time is displayed it is blank across one line. I didnt even ask to have it look at. Please help!

I own a complete Dacor Kitchen, with many appliances. They are the highlights of my Home. Great features: fast induction cooktop with an efficient silent hood, versatile refrigerator, reliable oven, and of course the always dependable dishwasher. This is My Dacor Kitchen!

Updated on 09/08/2019: Received a long apology from Dacor regarding their complete inability to service our range stating they would make it right. After sending them all my contact info privately at their request, we have heard nothing. My husband drove to Houston to their showroom, met with Dacor rep out of California, still nothing. Note there are only a few suggested repair services on their website which none cover our area. Avoid Appliance Genius. They wanted $ 500 just to drive 50 minutes travel cost. So here we sit, broiler in main oven out, lighters do not work, and the control screen is blank. Yes, Dacor was great until something broke.Original Review: Our Dacor range was great until it started needing repair. First the broiler went out in the main oven. Then some of the lighters quit working. When we called for repair, every place we called said they would no longer service Dacor because they were unable to get parts. For over a year we have gone back and forth with Dacor state office. They finally sent a “tech” from a video repair store. Really. He charged us $170 to drive to us. Then said he couldn’t get the brass rings off the burners, sorry. Called Dacor again and they said if we found anyone to let them know!!! Yesterday, the the touch panel burned out. I’m done. Dacor does not stand behind their products. I have documented all conversations. Do not buy Dacor.

I got a fridge, a wall oven, a cooktop, dishwasher, wine dispenser and now I am picking up a wine cooler to compliment my wine dispenser. I like a variety of wines and I need a lot of storage space. I plan to buy more wine coolers. Being the top cat of me crew I need a image and style to keep up. Capiche. Ciao.

I owned a 36 Dual Fuel Epicure range that required at least an annual repair for the same thing. The control pad (the pad with the buttons that controls the oven and light) would fry. This would cause the oven light to come on and off like a strobe light. Luckily, I purchased an extended warranty from the vendor, as each time this was replaced it was $750+ to repair. When I complained to Dacor on their support line, the representative actually told me that I was running the oven too hot!About 6 months ago, I sold the house and left the very expensive range behind. It was problematic from day one. Other repairs included replacing the ignitors. After a year of use, the insulation on the door came loose and was hanging in plain view through the window on the door. Every repairman that came to service the range said the same thing.... that they repair a lot of Dacors. When it worked, it was a great range. If you do buy a Dacor, do yourself a favor, buy the extended warranty. You will need it and it will pay for itself.

I purchased a DACOR PGR-30S LP in 2002. It has had a number of problems due to poor design that required replacing the control panel as well as other parts. However, it has recently developed a gas leak and thus is no longer usable. To fix the gas leak, you must take off the top burners to get to the leak and make a repair. UNFORTUNATELY, DACOR has to make room for new parts and no longer makes the O-Rings required. Yes, apparently a $10 O-Ring takes too much room seven years after I bought my range. So, in 2009, DACOR discontinued making the O-Rings and now I have a very expensive paperweight that I have to take to the dump so that I dont blow up my house. I wouldnt ever buy a DACOR again. The customer service it terrible and they cant even be bothered to carry simple repair parts. Buy a Wolf or some other high end stove because DACOR is literally a piece of junk!

We got a Dacor oven and microwave wall mounted Unit 7 model DMT 2420S when we remodeled our kitchen. I have had problems with the microwave with sparking on and off. I have stopped using it as I am worried about a fire.

I have been calling every appliance repair company authorized by Dacor to repair mystery problem. No one knows how to fix the problem, even Dacor. Both ovens stop heating during long baking times. I cannot bake anything longer than one hour, temperature drops to 290 or lower. You think your turkey is cooking but 4 hours later, it is nice and raw! Company should offer to repair or recall all stoves with double ovens.

The Dacor dishwasher had problems engaging and activating the cycle. We finally had enough and purchased a Bosch dishwasher even though the rest of our kitchen is Dacor. The new Dacor was $1600+ and the reviews on all their dishwashers since 2007 are one out of five stars. Dacor knows there is a problem and wont rectify it with the consumer. An amiable young man called from Dacor. He stated he would help me on any future problem with the other appliances. Why irritate the ** out of Dacor consumers when your company has had a history of irate consumers, specifically regarding the dishwasher. This certainly doesnt increase sales and only angers the base.

We have had our Dacor since 2006 and this range, the most expensive appliance we have ever owned, simply doesnt maintain the proper oven temperature. We have owned several far less expensive ranges and their ovens, much more basic designs, do what an oven is supposed to do maintain a temperature! We cook or try to quite a lot but working with this stove is like baking over an open fire while camping. This supposedly gourmet, fancy, convection oven that supposedly can bake cookies and meat at the same time is a total fail. We have had the service people out repeatedly to no avail. I am convinced we could change the circuit boards repeatedly and it wouldnt make a difference because it is a faulty design. This product should not be on the market or this company and their poor service in business. DO NOT BUY THEIR RANGES! Unless you dont cook and all you will do is look at it. We are thinking about retaining an attorney to file a class action suit. We could buy a low cost oven that works several times over for what we have paid in repair bills.

I first bought the low-end Dacor dual fuel range and overhead microwave oven. Within the time frame of 3 years, repairs to the stove cost over $2,500. The stove cost $1,800. Ever single piece of plastic on the stove cracked and had to be replaced multiple times. The microwaves handle cracked 6 times, twice in one week. The overhead trim, which is about 30 by 6 and heavy, fell off and hit me in the head while I was frying bacon. If it had hit the pan of hot grease, I would have been burned. I contacted Dacor and got the brush off. I contacted Fight Back with David Horowitz about the problem. Dacor called me back, bowing and scraping, and we came to an agreement that they would take back the stove and microwave and put the full cost towards an upgrade to their high end model. I am sure you think I was stupid but the stove cooked beautifully and I thought a stove with no plastic trim pieces would solve the problem. Wrong! The microwave control panel has gone out twice, each repair costing around $350. The handle broke 4 times but that was covered under warranty. The front control panel has died 3 times (another $350 each time). The broiler dies each time the self-clean is used and that has been fixed 3 or 4 times. Some computer board on the top of the stove has died (another $400). The enamel lining inside has cracked, crazed, chipped off and rusted. Now, the front control panel has died and so has the one on the microwave. Times are very tough for us now and I cant afford to get them fixed. I noticed that the front panel trim on the top of the microwave is starting to pop out again (plastic fatigue). Hopefully, it will fall off again while I am cooking and hit me in the head and knock some sense into me. If it does happen, I will take them to court.

I have 2 single ovens side by side and have a cooktop and ventilation system - my experience with the cooktop and vent (2000) was so good that I did not hesitate to buy Dacor MorS130S ovens. They were installed in my new kitchen in September of 2012. I had my cooktop and ventilation system reinstalled. My daughter accidentally cleaned the oven without taking out the GlideRacks (which are hard to take out). We oiled them, etc., like the manual says if they are accidentally left in - they will not glide at all and now I am being told $300 each to replace excluding the cost of the service call. This is ridiculous. What kind of design is so poor that racks would get in this condition? I had Bosch ovens before and their warranty was wonderful and I, luckily, bought a Miele dishwasher which has a 10-year warranty. I would not buy Dacor again because of the warranty and because of this problem. I am beyond disappointed as I love my cooktop etc. I feel that Dacor should at least pay for part of these GlideRacks.

Warning! Do not buy Dacor appliances! We have had our appliances for three years now and all of them have had something wrong with them. Oven circuit panel went and had to be replaced! Dishwasher arm and seal broke and dishwasher leaks! Refrigerator freezer compressor went! Hood range switch broke and had to be replaced! Dacor is the worst appliances I have ever bought! Buyer beware!

We have a new (one year old) home with Dacor appliances. The microwave oven went on the blink the first month but was repaired by a factory approved repairman. Something to do with the computer. Now the double oven will not hold a temperature. We set the oven at 420 and it only goes to 360 even though the readout shows 420. We just decided to skip the repair process and bought a new Wolf oven. This is our second Dacor within the past two years and both have had the same problem. Dont waste your money.

I purchased a Dacor Double Oven 5 years ago. It is a beautiful design, but unfortunately a piece of junk. Over the 5 years I have had the oven, I have had service technicians repair the oven on 7 different occasions. Unfortunately, my oven is not out of warranty and has failed once again. Today was my 8th attempt at service and the service technician could not get the oven working. I have called Dacor, pleading with them to stand behind their product and to replace this useless piece of equipment. I continue to get L22 error codes, and the main circuit board had been replaced twice. After persistently calling Dacor’s customer service, they finally said they would sell me a new oven at a discounted price to the tune of $4800 plus tax, shipping and installation. I ask myself, why would I want to buy another piece of junk? If Dacor wont stand behind their products, perhaps someone should initiate a class action suit against them.

Liked the look of Dacor oven and fit in with remodel. Relay board replaced year after warranty - $600. Then after 8 years of light use (have Thermador home pro stove), another circuit board failed, part no longer manufactured. Oven now worthless and headed for landfill. Outrageous! Large national appliance retailer says Dacor not reliable. Daughter had major problems with Dacor fridge. Have purchased Kitchenaid replacement on recommendation of same retailer. Built to not last...shame on you, Dacor.

Wow! I wish I had read this website before we built our house 3 years ago. I have a 5 burner Dacor cook-top that has been nothing but trouble since day one! I have 5 different appliance brands in my kitchen and the Dacor is the only one that has caused continuous problems. I was so mad at the repair man today I hung up on him (poor guy, I see now Dacor is the problem). The cook-top has exploded three times. ow when I say exploded, I am not joking at all. I mean the explosion blew the cook-top up and burners off, blew the cabinet doors underneath open, flames shot out and the house shook. One of the times, my one year old son was standing next to it. I was so upset I ran into the other room with him and sat on the floor and we both cried. It was terrifying! I have had a repair man here 6 times over the last 5-ish weeks (Yes, I didnt have a stove over Thanksgiving and I was the host; its not looking good for Christmas either and we have 4 kids). They have replaced, cleaned and fixed everything possible. They then pointed the finger numerous times at the propane company (which they now have determined it is not a propane problem for sure). Today the repair company called me (by the way, they have been constant contact with their Decor rep Rob about the problems) and said they are done. My expensive 3 year old cook top is not repairable. They have exhausted every possibility. They have been here 6 times and the propane company three times. I have a hole in my granite counter top cut specifically for the cook-top and am told that every cook-top is a different size so I do not know what I am going to do. I called Dacor today and asked to speak to someone who could help me to no avail. I then asked for someone (anyone) to call me back today. You guessed it. Theres been no call back. This is getting really old. How many weeks does this need to go on (dont answer that)? Another problem that I have just lived with is that the stove continually clicks for quite a while after you are cooking. I was told to clean it a certain way. I did that and it didnt work. The repair man did it; it didnt work. The repair man said something was loose inside and tightened it. It still didnt work. I guess I could live with the click. It is the explosions that I need fixed.

Our new ranch has three Dacor microwaves, only one of which has had a few months of use. The others have very limited use. To this point weve not had problems, but given the opportunity to redo the purchases wed go with a popular brand, i.e., LG, GE, Panasonic. They are more flexible, parts are available, and all three combined would probably cost less than one of these. In fairness, I personally feel the same about our other high end appliances, Wolf, Viking, Sub-Zero and Asko. None beats our former appliances. Maybe its just about show.

Dacor Fuel Range broken door - My Dacor is by now 13 years old. I see from other reviews that the problems I have with my range have not been addressed in newer models--the same problems exist. When I received my Dacor, there was a crack in the front, above the door. It was small, and Id just had a baby so I let it go. I noticed that the door did not close either, and because I did not address it within a year, Im out of luck. But youd think that making an oven with a door that closes snug would be a top priority. It only closes properly when in cleaning mode. My oven window became brown and I cannot clean it. Its a shame that these things are messed up because the convection seems to work wonderful and the oven is fairly attractive. If the door closed all the way. Im getting ready to consider a new oven. Wont be a Dacor.

When we recently remodeled our kitchen, we replaced our Dacor double ovens that we had had for 15 years. These were great ovens and not one problem with fairly heavy use, so we bought the Dacor Modernist double ovens. The ovens are usable, but they are the worst engineered product I have ever experienced. First, there is no clock on the stove because as I was told the clock would etch the screen if it was on 24 hours a day. Second, the sound the timer makes is so soft, even on the loudest setting, cannot be heard in any room but the kitchen, so I paid a premium price to carry a timer with me, so I know when my oven is done baking. Third, if I turn the oven light on, the timer either stops completely, or it resets to the original time. Fourth, the oven buzzes when it is cooking. Fifth the user manual is useless and there is no video or online information on how to use this oven that is not user friendly.Finally, I have talked to Dacor and have had the repair person here, but he knew nothing about this oven. I am sorry every time that I use this oven that I did not buy my other choice, which was the Woof double ovens, but we thought this would be wonderful product, like the wonderful product that our previous ovens were. We also thought Dacor was a family company, but is now owned by Samsung. What a disappoint these ovens have been. The engineering for this product is a disgrace for any company and I no longer see the Modernist products advertised and it may be because it is such a poorly designed product. I never met a computer that I did not love, but this is not the electronic wonder that was advertised when we bought the ovens.

We purchased this oven/cooktop was installed in February 2020. I have been unhappy with the performance of the smaller oven from the beginning. It takes 20 minutes to pre-heat, a loud fan starts to run partway during the pre-heating process and then warm air starts to flow out the bottom. Plus, it is not either holding the correct temperature or not reaching it completely, nothing I cook in there is done in a appropriate amount of time. Baking a small potato takes an hour and a half at 375, brownies take almost twice the approximate baking time. My attempts to contact them have been less than satisfactory. I wrote for a second time over two weeks ago providing a copy of the invoice and have still heard nothing. I am quite disappointed with this product & company.

I purchase a home with a Dacor double oven. Unfortunately the oven begins transmitting multiple beeps and the touch panel will sometimes read off after beeping a while. I contacted the staff at Dacor requesting a service manual. They refused to send me a service manual and stated that only authorized technicians can service their equipment. Its obvious they used google or a local phone book and sent me contacts of appliance repair shops in my area.When I called, they had never heard of Dacor let alone be factory authorized. I called Appliance repair shops up to 50 miles away to find there were no Dacor Dealers. I found one 70 miles away but it was too far to send a technician. If I remove my oven from the wall and take it there they would attempt to look at it. I had to reverse engineer the thing to find that my touch panel has gone bad and now I cannot find a used one. I want to recommend that anyone considering an appliance DO NOT PURCHASE A DACOR! If you are looking for high end stick to SubZero / Wolf. Oddly enough I see that there hasnt been any reviews for the past 5 years. Maybe it appears people have stopped buying Dacor appliances.

I purchased a Dacor Black Dual Fuel Range (RSD30B) in 2001 which was installed during a kitchen remodel. We moved back into the house on 12/24/01. We hardly ever use the oven because my husband barbeques every night. In less than 5 years, a piece of the plastic front control panel fell off. In early 2008 the self cleaning function broke (error F2). I called Dacor and they referred me to a repair service. It was going to cost almost $500 to repair so, given that we use the oven so little, I decided not to spend the money on an oven that was falling apart. Now within the last two years the plastic control panel is cracked across the front and more pieces are starting to fall off. Now the clock and the timer have stopped working. I called Dacor again today and was told that the seals and hinges on the oven are probably bad, which is contributing to the problem. The customer service person was rude and unhelpful. He said it was not unusual for a ten year old oven to break. He gave me contact information for a parts dealer and two repair services. I bought this oven believing it was a high quality and I expected them to stand behind their product. What can you do to help me?

I purchased my 30 range and was so excited! Well no longer. First the wrong range was delivered. I had to wait another three weeks for the correct one. My oven can not cook at all. Temp fluctuates by 100 degrees. Going on my third service call and still not working. It very unfair, I have to take time off work to wait for repair person, then nothing is fixed. I wish I could return this lemon. But after reading other reviews I am not alone. Why is this company not accountable for ripping hard working people off. I love cooking. Its my passion. My Kenmore Elite was half the price and far more superior.

The ovens needs a new latch kit and a mew control panel every year. It has been repaired 15 times. So many issues but those are the most consistent problem areas. Dacor should have replaced our range the first year. Even the repairman says everyone has had the same issues. For what I have paid in repairs I could have bought a new range.

Stylish products with amazing performance. Originally, I wasnt very familiar with Dacors luxury appliances. However, I saw some of their new products and decided to take plunge. Glad I did! I bought a 36 French Door refrigerator for the house and I love the features and performance of this fridge. The fresh zone adjustable drawer can go colder than the standard refrigerator compartment, so I keep it at just below freezing for my beer and champagne. Makes ice super quickly and I feel that the produce also lasts longer. Overall, very happy with this purchase and when I do a full kitchen remodel, I will be considering their cooking products as well.

Dacor Distinctive Series Range model DR30D - One week after the appliance warranty expired, the oven stopped heating. The repair man replaced the circuit board. We still got a code 33 when we try to get the oven to heat to 400 degrees. Called customer service, they said to flip the breaker to the unit off for a few minutes. Seemed to help but we do not use the oven much, as we also have a Meile microwave/oven that we love and use that more. Then I cleaned the oven using only the ovens program. That locked down all of the gas cook top knobs. I called the repair service, it snowed on the Saturday of the appointment. They cancelled. I did not check the stove on Sunday. On Monday the repair service walks in and simply turns it on, no problem. VERY FISHY!!! I have heard the manufacture can control it by computer chips. This appears to be very true. Now the stove does not heat past 250 degrees. After speaking to a few people it appears this is a very common issues. Dacor is a lemon. Do not waste your time and money.

I bought this beautiful range and choose Dacor but when we used the Green Clean on it the enamel pealed off a spot on the bottom of the oven a 2x4 inch patch. Now Dacor say that this is cosmetic and will not honor their warranty. I have been calling them daily because they do not call me. Their service sucks.

My Dacor (3 years old) oven top burners igniters dont stop after being turned on, although they are burning. Ive tried drying them for many hours and applying rubbing alcohol. The front ones do this all the time when we turn them on. When we turn the left front burner on, the front right ones igniter does it along with the left! The back ones do it occasionally, so are still usable. Apparently this is a common problem with Dacor units. Why havent they fixed it? Weve had them fix the electronic panel at huge expense, and are not going to call them again. When the back burners stop working, well get another unit. Ive had gas stoves for 30 years and have never experienced anything like this poor quality. Its amazing that they are still in business.

The range cost over $7,000. In the first 2 years multiple malfunctions in the mother board, the convection oven functions, and had to hire a local company to repair. The Dacor company did not care. Called them multiple times, wrote them and received no assistance or response. Repairs cost $$$$ to fix each time something broke.

Our 30in Dacor double ovens are approximately 12 years old. I feel they operate adequately. However, not better than our much lower end appliances we previously owned. My main complaint is the self cleaning function. My old ovens self cleaning worked much better! With our Dacor ovens one must take out the racks and clean them by hand. This is very difficult and time consuming. I used the 3 hr option to clean my oven that was moderately dirty, mainly from cooking a prime rib over the holidays. After the 3 hr cleaning the oven was still very dirty with splatters and grease. Im now cleaning my oven again with a second 3 hr cleaning cycle. I know at the end of this second cycle I will need to do a lot more cleaning by hand! I hope Dacor has improved their inadequate self cleaning feature. If it hasnt been improved, I really cant recommend Dacor ovens.

We purchased a Dacor oven stove top. It is about 10 yrs old now. 3 years ago we had a problem with the ignitor and had it repaired and paid over $200.00 for the repair. 3 Years later we are experiencing a similar problem with the ignitors clicking on and not turning off. I have called for repairs on this but expect this will cost me some more money. I have been online and have seen similar complaints leading to believe that this is a common problem and I would avoid purchasing Dacor ignitor products for the stove top, until resolved.

Add me to the Dacor hate list. The $4300 oven installed in 2000 is now a whopping $6400. My motherboard #2 is broken and the glass on the door cracked which to me is a safety issue. This is a two adult, no kid household so figure. We use the oven about 7 times a year. My Dacor rangetop and hydraulic exhaust have both required service as well.

The enamel on the bottom of the top oven has blistered and the metal beneath is exposed. If the oven is heated, there is a chemical smell. This is such a dangerous situation that the ovens (double) are being removed as I write and will be replaced with a different and more reliable brand.

We had misfortune of owning whole suite of Dacor appliances for about two years now -- Cooktop, oven, microwave, and hood. The Ovens motor burnt out after few months of operation - This was covered and repaired by Dacor. Now Cooktop - Dacor Distinctive DRT366S/NG - just exploded with fire when we were cooking one night. This was very scary and dangerous situation. Dacor acknowledges that there was issue with this particular unit but they will not look at it or help us fix it. If you pay 5 times the price of a regular cooktop you would think that a company would have integrity to look into cases like fire and explosion to make sure these things not happen in the future but when they even refuse to look at the issue that tells you that they do not care. Imagine if GM/Ford told their customers that manufacturing faults are not covered anymore since the cars are out of warranty. This has been worst experience ever and we will never ever buy or recommend buying Dacor appliances.

Do not buy a Dacor appliance unless youre okay with replacing parts for the oven in less than 2 years. The control electronic part was replace then less than a year later the user interface had to be replaced. Less than a year after the user interface was replaced, the oven completely stopped working. After calling the same repair guy to come fix it, they informed me that the company no longer sells the control interface. When I called the company, the only options they gave me were to send the part to a third party refurbish company and have them fix it. That means I would have to call the service repair company for the FOURTH time to have them remove the part, I would need to send it away to get fixed and call them back to put it back in. Dacor didnt even offer to pay for any of this. The customer service rep offered to give me a discount on a new unit. Are you kidding me?!? Please do yourself a favor and dont buy anything from this company. They dont back up their products and its clear they dont care about their reputation. Its a waste of money to be spend on high end appliances that are poorly made. Spend less from a different company thats been around for a long time. At least if a part goes, youll have reassurance they will have that part handy. A terrible company. I hope they go belly up soon so they can stop selling overly priced kitchen appliances to people.

My wall oven spontaneously heating to 800, will be fixed! Thank you, James of Dacor for contacting me again and for arranging for my wall oven to be repaired at no cost. When our oven is in top working order, we love the convection option and we love the internal temperature probe. The people at Dacor offer the friendliest service I have ever encountered and I thank you so much for that.

The first F1 Error needed a new membrane repair for $470.00, after 4 years of service. Now, the same F1 error after the new membrane is only 13 and 1/2 months in service and it is now out of warranty. Customer service people are rude and unhelpful but when pressed, they said they might be willing to help after a service tech, which I have to pay for, diagnoses the problem.Even the Sears store people advise their customers not to buy Dacor products and that is sad because it is one of only 2 American made options. Dacor needs to step up their product engineering, commitment to quality and get rid of the rude phone people in Customer No Service. This is not the end of this experience but the only reason I am not junking the stove is because a comparable replacement is another 3000 bucks from another vendor which I cannot afford at this time.The irony of this is that the company clearly knows they have problems but when I asked if the replacement parts had been improved so the problems wont persist, I was told that no changes or modifications to the electronic brains had been made. How stupid is that! They are just asking for more problems with the parts they send you to fix what does not work.

Weve had these appliances for 15 years. The cooktop has worked well. However, it could be improved with a lower lever for heating on its small burners, allowing it to simmer water rather than boil. The Dacor exhaust we purchased is one of those type that pop up out of the counter. It works but leaves much to be desired. When it runs, it pulls so much air the flame goes out on the burners. It is still not efficient at getting rid of cooking smells or smoke either, but that is simply a problem with all of this design so I cant fault Dacor. We have the biggest problem with the double oven. There are three main issues: 1) Whenever we run the self cleaning function, it pops the heat safety switch inside the oven housing so I need to take it apart to fix it. Hence we work to keep it clean so we never use the cleaning cycle. 2) The oven door gaskets prevent to door from closing and sealing all the way. The door tilts out app. ¾ because of this. We were told by the service guy who came to fix problem 1 above that this is the way the doors are(!). Our bottom one also tilts out but not as much. Ive dealt with this for 14 years! 3) We have to sand the burner electrodes on the cooktop to ensure they spark to light the burners at least 2-4 times per year. Not sure if that is normal or not.

We purchased a very expensive Dacor double convection oven about 15 years ago. This was based on recommendations from friends who do a lot of cooking like we do, and the mistaken thought that this US company would be more inclined to support any future problem. We now have a problem with the control panel. Dacors only response is that they do not make the part anymore and cannot help us remedy the problem. They even had the nerve to say that they would give us 10% off a new one. Except for the annoying buzzer sound, the stove works well. Buying a new one is a financial burden we never expected or want to accept. We are telling all of our friends to stay away from this manufacturer. I wish I did not have to give Dacor any stars.

Dacor EO227SCH - double wall oven. Installed all Dacor appliances when we did a kitchen renovation in 2008. Stove top, Micro Wave and Warming Drawer each have been excellent. Ovens have been a nightmare. Dacor would not honor warranty 7 days after it expired. Had no less than a dozen service calls in first 3 years. Ovens conveniently have problems around holidays. Example: lower oven quit working two days before this Thanksgiving - last week! Paid a high price to get Dacor and have paid thousands and spent countless hours on service calls since. Am totally dissatisfied with Dacor products and the companys refusal to stand behind its product. I tell everyone who is contemplating Dacor not to. Did it today with a couple who signed a contract for a $1M home in N Atlanta. Builder specified Dacor and I strongly advised against it. Homebuilder is now looking at other options.

Ive had the 27 inch double wall oven for 10 yrs. When I purchased them they were 6000 dollars. With 3 years I started having a problem with the motherboard. It has been replaced 3 or 4 times. Ive lost count. The last time they said it was fixed for sure. Well today the same issue is occurring. Im done! Never buying another Dacor product again.

I rarely write reviews but when I found your site, I decided it was time to vent. I bought a 36 dual fuel, convection Epicure range in 1999. It was not a cheap oven and I was excited at the possibilities of having a 16,000 BTU broiler and large oven cavity to work with. Lets just say that excitement quickly wore off. Almost immediately after the range went out of warranty, the ignitors went bad and we also had to replace the control panel ($400 in repairs was a lot back then). After that, we continued to have ignitor problems and replaced them again. Finally, I just stopped doing it and lit them with my aim and flame. I never allow my children to cook on the stove because I am afraid they will be burned. Most recently, my broiler element, relay board and again more ignitor problems ($1,200 in repairs). Not to mention, the repairman had a terrible time trying to access all the areas and was at my house for 4 hours trying to do so. When the initial problems happened, I emailed, phoned, left message, etc. to no avail with customer service (I use that term loosely). This company is the worst. I have told everyone I know never to buy a Dacor anything. Next time, Ill buy a Wolf.

I went to put something in the cabinet at the top of my built-in wall oven and noticed the cabinet door was warm. Then, I noticed the heat was coming from the top of the oven at the control panel. I am afraid of a fire breaking out in the cabinet now. The oven is less than a year old. We just remodeled our kitchen and installed the ovens in May 2012 and this is just June.

This is my first DACOR product. Did not know too much about the brand. Did some research and read reviews online & decided to try a microwave in a drawer since I needed to save counter space. We use it all the time and so far it’s worked great. The color blends well in our kitchen even with the microwave being the only DACOR we have. DACOR customer service has been great and professional when I needed to register the unit. I would recommend the DACOR brand to anyone when they are looking for a premium appliance and anyone who comes to my home comments about how lovely it is. Thanks DACOR.

My ovens have had to have a new board, dishwasher rarely works, my cooktop cant get parts needed! The worst appliances on the market!

Bought expensive refrigerator in Miami. And because I live in Miami 2 months in year use and tern in refrigerator only for 2 months. Every year have problems for thousands dollars. Company keep changing parts. I keep paying. Same problem every year. Big mistake to buy Dacor appliances. Regret very much and angry. People who fixing they know nothing. Only money. Very not happy. Looks like new. Today will throw on the garbage.

We purchased this oven February 2009. On 6/7/11, we had to replace the touch pad assembly. On 12/16/13, we again had to replace the touch pad assembly with a cost of repair to this point of over $900.00. The over cost $2,395.00 when purchased. On 3/16/14, while on convection/bake the oven switched over to broil. On 3/20/14, a repairman came to the house. The condition did not replicate but the repairman, in conversation with Dacor, determined that the fix, if this should happen again, would require the replacement of the relay board and ERC control at a cost of $700.00. On 3/27/14, while on convection/bake, the oven switched over to broil. I called Dacor and was forced to leave a message.

We bought our house in 2010 and our Dacor stove was supposedly newer. When I went to clean it, I found loose screws in the bottom. Apparently, the convection element is loosing its screws and washers. Ive had this appliance fixed once already when the cooktop kept clicking. The black plastic around the controls cracked mysteriously. It takes 3 hours longer to cook a turkey than it should. This is a strange stove, which supposedly cost a lot. I wonder if a convection part missing two screws should be used?