FiveStar se compromete a construir gamas de estilo profesional de la más alta calidad para su uso en cocinas domésticas. Desde la introducción de la primera gama FiveStar ProStyle en 1990, nuestras gamas han recibido numerosos premios por su excelente artesanía, rendimiento y diseño, incluidos cuatro premios Best Buy a la excelencia de Consumers Digest y varios premios Design Journal ADEX a la excelencia en el diseño.

Distancia Códigos de error

Problem: Surface Burner fails to light.  
Reason: Range not connected to power supply (Solid State Ignition). 
Solution: Connect range to wall outlet or check circuit breaker or fuse box. 

Problem: Surface Burner fails to light. 
Reason: Burner incorrectly rated. 
Solution: Have servicer rate burner. 

Problem: Surface Burner fails to light. 
Reason: Clogged burner ports. 
Solution: Clean ports with a straight pin. 

Problem: Surface Burner fails to light. 
Reason: Open burner not properly positioned. 
Solution: Place burner in proper position on valve and burner hanger. 

Problem: Surface Burner fails to light. 
Reason: Sealed burner cap not properly seated. 
Solution: Re-align burner cap. 

Problem: Surface Burner fails to light. 
Reason: Moisture. 
Solution: Moisture procedure. 

Problem: Surface Burner fails to light. 
Reason: Cracked ceramic ignitor. 
Solution: Contact the factory Parts & Service Department. 

Problem: Intermittent spark at surface burners (Sealed burner models). 
Reason: "Low" setting adjusted too low. 
Solution: Air turbulence at burner head. 

Problem: Intermittent spark at surface burners (Sealed burner models). 
Reason: Contact servicer to adjust low setting. 
Solution: Normalize air movement in kitchen. 

Problem: Uneven flame (Open burner models). 
Reason: Clogged burner ports. 
Solution: Uneven pan alignment. 

Problem: Uneven flame (Open burner models). 
Reason: Clean port holes with a straight pin or uncoiled paper clip. 
Solution: Remove pan from burner (it obstructs air flow). Try again. 

Problem: Surface burner flames. lifts off port. Is yellow in color. Is noisy when turned off. 
Reason: Improper gas mixture.  
Solution: Remove pan from burner (it obstructs air flow). Try again. 

Problem: Have servicer adjust burner. 
Reason: Surface burner flames. lifts off port. Is yellow in color. Is noisy when turned off. 
Solution: Remove pan from burner (it obstructs air flow). Try again. 

Problem: Oven does not light.  
Reason: Range not connected to power supply (Solid State Ignition). 
Solution: Connect range to wall outlet or check circuit breaker or fuse box. 

Problem: Oven does not light.  
Reason: Damaged ignitor or faulty safety valve. 
Solution: Contact the factory Parts & Service Department. 

Problem: Oven temperature seems inaccurate. Food takes too long to cook. Food cooks too quickly. Under-browning. Over-browning. Overdone on outside, underdone in center. 
Reason: Oven was not preheated. 
Solution: Preheat oven if needed. 

Problem: Oven temperature seems inaccurate. Food takes too long to cook. Food cooks too quickly. Under-browning. Over-browning. Overdone on outside, underdone in center. 
Reason: Incorrect use of aluminum foil. 
Solution: Remove aluminum foil. 

Problem: Oven temperature seems inaccurate. Food takes too long to cook. Food cooks too quickly. Under-browning. Over-browning. Overdone on outside, underdone in center. 
Reason: Oven bottom incorrectly in place. 
Solution: Replace oven bottom correctly. 

Problem: Oven temperature seems inaccurate. Food takes too long to cook. Food cooks too quickly. Under-browning. Over-browning. Overdone on outside, underdone in center. 
Reason: Incorrect utensil used. 
Solution: Use shiny pans for cakes, cookies, and biscuits. Use dull or glass utensils for pies and breads. Dark pans absorb heat and can cause over-browning. 

Problem: Oven temperature seems inaccurate. Food takes too long to cook. Food cooks too quickly. Under-browning. Over-browning. Overdone on outside, underdone in center. 
Reason: Oven calibration or burner out of adjustment. 
Solution: Contact local service provider to calibrate oven and/or adjust burner. 

Problem: Self-cleaning cycle does not work. 
Reason: Oven control knob not in CLEAN position. 
Solution: Follow instructions for starting self-clean. 

Problem: Self-cleaning cycle does not work. 
Reason: Door lock handle not in LOCK position. 
Solution: Follow instructions for starting self-clean. 

Problem: Flames inside oven or smoke coming from vent while oven is in self-clean mode. 
Reason: Excessive spill-overs in oven.  
Solution: Follow instructions for interrupting self-clean cycle. Let oven cool and wipe up spills. Restart self-clean in accordance with instructions. 

Problem: Soil not completely removed after self-cleaning cycle. 
Reason: Areas on front frame of oven and areas on oven door outside of door seal do not get hot enough to burn off soil. 
Solution: Areas must be cleaned BEFORE self-clean cycle is started. Clean using a stiff nylon brush or a nylon scrubber and soap and water. Be careful not to damage seals. 

Problem: Soil not completely removed after self-cleaning cycle. 
Reason: Self-clean cycle was interrupted. 
Solution: Wait three hours and restart the self-clean cycle. 

Problem: Soil not completely removed after self-cleaning cycle. 
Reason: Excessive spill-overs in oven. 
Solution: Wait for oven to cool. Clean spills as much as possible. Wait three hours and restart self-clean. 

Problem: Range lights do not work.  
Reason: Range not connected to power supply. 
Solution: Connect range to outlet or check circuit breaker or fuse box. 

Problem: Range lights do not work.  
Reason: Burned out light bulb. 
Solution: Replace bulb with a 40-watt appliance bulb. 

Problem: Range lights do not work.  
Reason: Defective switch. 
Solution: Replace switch. Call servicer if needed.