If you're looking for help fixing your Keeprite Furnace, look no further! Our comprehensive Keeprite Furnace repair guide will explain common issues, provide tips, and maybe show you how to repair your appliance.

Check the Furnace Power 
After verifying that the thermostat is set properly and is getting power, ensure that the furnace itself is getting power. Check fuses and the circuit breaker to ensure that power is getting to the furnace. Also, check the electrical switch at the furnace to make sure it is in the ON position. If maintenance or repair work has recently been done on the furnace, this switch may have accidentally been left in the OFF position. 

Reset the Furnace 
If your furnace has a reset button (it’s often a red button located on the front, side or back of your furnace), try pressing it. If the furnace powers up, you should soon have heated air cycling through your home once again. Sometimes, pressing the reset button is all that is required to get your furnace working properly. This button controls an automatic shut-off feature that shuts down the furnace if it gets too hot or if there are other problems. A furnace that frequently shuts off automatically may have other issues, such as a clogged air filter or blocked ducts that are causing the furnace to overheat. 

Check the Service Door Cover 
It is possible—particularly if you’ve recently changed your furnace filter or done other maintenance—that the door to your furnace has been left open or closed improperly. If this is the case, properly shutting the door cover on your furnace may fix the problem. 

Look for Filter Dirt 
Dirty furnace filters are one of the most common causes of furnace failure. A dirty furnace filter can limit the airflow through your furnace and cause it to overheat, which will shut it off automatically. If you suspect a dirty air filter, change the filter, press the reset button (if your furnace has one), and see if your furnace begins to emit heated air. Change your furnace filters regularly—pros recommend changing them once a month—to ensure that your furnace continues to work properly. Unaddressed, dirty furnace filters can cause extensive, and expensive, damage to your home’s heating system. 

Check the Standing Pilot 
If you have an older furnace with a standing pilot light, it’s possible that the pilot light is extinguished. First, confirm that the light is out. Then, turn the gas valve to the off position and wait five minutes. If there is a reset button on your furnace, turn the valve to the pilot position and hold a flame to the dedicated pilot gas tube while pushing the button for about 30 seconds. If the pilot doesn’t light on the first attempt, wait a few minutes and repeat the procedure, this time depressing the reset button for 45 to 60 seconds. 

Clean the Flame Sensor 
The flame sensor safeguards your furnace by ensuring that gas flows only when there is a flame to ignite it. A dirty flame sensor may cause your furnace to function improperly. Typically, the flame sensor comes in the form of a rod that can be found near the back of the furnace, right in the path of the burner. To clean the sensor, turn off power to the furnace at the breaker box. Then, if possible, remove the sensor from the furnace. Scrub the sensor gently to remove dust and other residues. Finally, reattach the sensor and restore power to the furnace. 

Related Error Code Pages:
Keeprite Air Conditioner Error Codes, Keeprite Furnace Error Codes,

Related Troubleshooting Pages:
Keeprite Air Conditioner Troubleshooting, Keeprite Furnace Troubleshooting,

Related Repair Pages:
Keeprite Air Conditioner Repairs, Keeprite Furnace Repairs,

Related Parts Pages:
Keeprite Air Conditioner Parts, Keeprite Furnace Parts,

Related Price Pages:
Keeprite Air Conditioner Prices, Keeprite Furnace Prices,

Related Pages:
furnace maintenance service, furnace service in my area, furnace repair services, furnace service cost, residential furnace repair,