Almost immediately after purchasing the GE microwave we started having problems with the circuit board. It is now totally on the blink after only 4 years. This was a high price appliance. Sometimes when setting the timer on 30 seconds, the microwave would still be running and after looking at the timer it would still have 4 or more minutes left to cook. This is a FIRE HAZARD! We have lost food from timer malfunctions. This is a product I would be afraid to purchase. I am wondering why cant there be recalls on these cheaply built defective microwaves since you read of the same malfunctions over and over. GOODBYE GE!

Our microwave was manufactured in September 2010 and we purchased it in October 2010. It has been used a few times a week for reheating leftovers. I have owned secondhand microwaves and unknown brand microwaves, and they have been more reliable than the GE Profile. My husband and I invested in the Profile series when we remodeled our kitchen. After a lifetime of moving and living in homes with much to be desired kitchens, we decided to spend money to provide ourselves with a functional kitchen. If I had to do it all over again, I would have saved myself the trouble and purchased my appliances from another company.After having to call GE to send out a repair person 5 different times to work in our microwave oven, we are left with a nonworking microwave oven. It seems that a company that has made record profits from their faithful American fans could do the right thing and replace the microwave oven with something that works. Perhaps they do not have such a product. They have offered to let us buy a new one at a big discount, but they have not clarified what the percentage will be. The problem I have with this is that spending one more dollar on a product with no backing from the company it came from would be asking for more let down. I believe Ill have this lemon removed and quit before I take on any more consumer letdowns.

A GE water heater was installed in our new home in 1962. As of today, November 2, 2014, we are pleased to let you know it is still in excellent working condition 52 years later... Way to go GE... The only update we changed lower element twice in 52 years!!!

Ive had a GE Dishwasher for over 6 years and it works great. The issue is every 2 years or so, the plastic over the metal rods that make up the plate racks wear away and rust the underlying metal. The first time GE charged me about 200.00 for the racks, where the dishwasher only cost 250.00. The second time they replaced for free and now this third time, GE is being absolutely absurd not replacing these racks. My concern for mine is the health issues arising from having rusted parts in the washer. I believe this to be a manufacturers defect and could be happening in 1000s of these dishwashers. Metal should not go into water!!! GE should gladly replace my racks but theyre giving me a major problem, like take our offer or dont bother us. Please see the attached pictures and hopefully this doesnt happen to your dishwashers.

On 05/20/2014, our GE microwave over the stove unit burst into flames. My wife was using timer and walked away then turned around and heard the microwave fan start (spontaneously). Then she observed flames/smoke reflected in the Microwave window. She observed the interior of the microwave was aflame. The fire was extinguished with a rag & water. The burning items appeared to be plastic/insulation. The fan from the microwave was with the burning insulation on the rotating plate. Had this unit only 14 months during that time the microwave fan would turn itself on for 3 minutes and then turn off all by itself. Happened twice in 14 months. Glad we were at home and were able to extinguish the fire. Called Lennar the builder who put this unit in to take pictures and check electrical. Was told the GE unit was bad to call GE. I know this will be a hassle as others have had this same problem with not so good results.

I bought the matching GE Microwave and Range four years ago. After three years of usage, the plastic on the handle melted and peeled, making it very uncomfortable to open the door. It was caused by heat from the GE range below. It took months to replace and cost almost $150.

Last fall, we updated our kitchen counters to quartz, and the Jenn-Air to a GE induction cooktop. While it is indeed pricey, the joy of cooking is not overstated here. The quick heat up, the ease of controlling the heat more precisely, and the easy clean up makes this unit well worth it. I love it!

Even though the dishwasher was bought 15 months ago, it was only used for the last past 5 months. There is no water fill up the washer. When I call GE for the service, the operator keeps saying that it is out of one-year warranty and I have to pay everything to fix it; I have proof that the product was in use under 5 months. The product clearly has a problem. I am not happy with their services and with the product.

We have a GE profile dishwasher for about 14 months. I just found out last week that its out of warranty and that the 2 circuit boards inside are bad so the tech came out and didnt have a replacement board on his truck saying they never have problems with this dishwasher so hell order this part and be shipped to my house. He would install it on the following Thursday so Im sitting here waiting for service. I finally called to find out that GE decided that it is going to be repaired on Friday. I did not know this of course so I asked for a supervisor. I was put on hold with no answers, finally hung up in disgust.

Im just beginning the process of investigating this dishwasher I bought that doesnt work. I am a snowbird so this machine has only been used part time for a family of 2. We installed it March 2010 and it’s October 2013. But during that time frame weve only used it approx. 3 months in 2010, 7 months in 2011 and 7 in 2012 and 5 months in 2013. I noticed a smell of something burning before we left in May but thought it was something from the outdoors. So blew it off and left. When we returned last week, we discovered that the water wouldnt fill up but the heat would come on..... even if you turned off the heat feature!!!! And it gets hot. Weve unplugged it and was going to call GE repair tech until I read these reviews. Now I dont know what to do because its not under warranty.

I was washing the inside of my microwave and noticed that paint was peeling off the top. It looked like paper. Reading the other comments on the same problem I knew it would do any good to contact GE. GE products have always been inferior to other brands in the market.

Had to purchase new oven. General Electric appliances are JUNK.

We bought all GE Profile appliances for our kitchen when we bought our home in 2013. Since then every appliance has had issues and have replaced parts on. The biggest disappointment was the dishwasher. It doesnt clean since day one. We bought extended warranty and had numerous service calls since we bought it through ABT appliances. Not to mention the dishwasher alone was $1000. We literally have to wash the dishes with hands because this dishwasher is only for show in our kitchen. I called GE consumer relation and they tried selling me another one with a discount for $950. What a joke. Will never recommend or buy GE products.

Have to rinse dishes clean before I put them in. Otherwise they will not get clean. Does as well as most other dishwashers- until you get into the very upper end ones. The racks are good size. The outside is nice looking.

Our microwave (GE model JEs1655DR1BB) is only a couple of years old (if that). Today, my teenage son went to make microwave popcorn and the microwave made the most horrendous noise and started sparking behind the panel on the side. It lit up the entire room. I went and checked to make sure there wasnt something foreign in it (there wasnt) and stupid me thought maybe it was the popcorn so I tried a bowl of water. It did the same thing again. I am just thankful it didnt start an actual fire, but I am furious!

Our microwave is spacious, simple to use and dependable. This is about the fifth microwave I have had. The others only lasted about 6 months. My current microwave is about 5 years old, despite the fact that some of my previous ones were also GE.

The dishwasher runs and works very well. It washes all dishes, pots, pans, glasses and silverware great. Weve never had any problems with this dishwasher thus far. I would recommend this dishwasher to anyone in the market.

This is the second GE microwave. In 2 years I have had that, the paint peeled off inside the microwave in sheets! I contacted GE the first time and was offered no help or explanation. I was told it was an older model, even though I bought it new. This time, I just chose to throw it away and never purchase another GE appliance again!

Bought all new General Electric Appliances in 2002. Dishwasher, Washing Machine, and Dryer replaced after 6 years. Handle on Advantium Microwave replaced twice at the cost of $50 for handle made of plastic? Today our house smelled like burning plastic which upon inspecting dishwasher, found the heating element was COOKING everything in dishwasher. Got so hot that is melted the silverware bin and anything plastic in dishwasher. Glad we were home to unplug unit which we could not reset the controller on door of unit. Consumer Product Safety Commission is aware of this incident and is VERY common complaint with this Manufacturer. I have been on hold for 30 minutes with GE consumer relations phone number 1-800-386-1215. Was told by automatic system wait time was going to be 5 minutes. Figured I would write complaint on here as well while holding...READ CONSUMER REPORTS and stay away for General Electric Products!!! Model Number is PDWF480P00SS. Serial number is GS734641B.

On 05/04/2014, our GE microwave over the stove unit burst into flames. My wife was sitting in our family room and heard the microwave fan start (spontaneously). Then she observed flames reflected in the kitchen window. When she went to the kitchen, she observed the interior of the microwave was aflame. The fire was extinguished with a spray bottle of water. The burning items appeared to be insulation. The fan from the microwave was with the burning insulation on the rotating plate.

Slightly more than one year, I purchased a model GLD4404RCC dishwasher about which I have made complaints in the past, concerning poor washing performance and which you chose to ignore beyond attempting to tell me how to use it. Now, this Chinese-made piece of junk has begun to give different problems. Upon completion of the wash cycle, it starts to make a lot of noise and will not shut down. I must do this manually. Guess what? It has waited less than two weeks after the purchase date to do this, meaning it is out of warranty. We have just purchased a new home and will be needing new appliances such as dishwasher, refrigerator, washer and dryer, and a water heater. It will not be GE. I shall never purchase any more of GE products as the whole company stinks.

This review is related to the Monogram 2.2 Cu. Ft. Built-In Microwave Oven model #ZEB1227SLSS. The GE site: https://appliances.monogram.com/us/specs/ZEB1227SLSS indicates in two places that the built-in trim kit is included (and one place where it is listed as additional), yet GE has confirmed that in fact, the trim kit is an optional add-on with a $325 additional cost. Calls to GEs consumer line have been disappointing. Me: Your website says its included, and is in a section with other features that are in fact included but not additional fees; GE: We have confirmed that the trim kit costs extra. We have, in fact, purchased the oven and are awaiting its installation, and I have other experience with GE Monogram appliances so I expect this to operate well. But I cannot understand their reluctance to acknowledge this error on their site. Potential buyers, please beware of this issue.

Dishwasher Disaster SR# TD729818B M# CDT765SSF1SS - Please, Please, Please, help me to come up with a solution with the issues that have plagued me and my family since we purchased the dishwasher referenced below in the numerous e-mails and electronic correspondence! As I write this E-mail, the GE Assigned warranty repairman has the dishwasher in question torn apart and disassembled for the 3rd time in the last month and half (Please see included photos). A repair I was told was only going to be minutes to conduct has now lasted over 3 hours and caused me to miss a very important appointment. That time frame will go at least another hour if the repair is even possible? Not to mention that a dishwasher that has been used less than 25 times has once again been torn apart and reassembled. I dont care how well built they are, this in my mind affects their performance!The repairman from JK Appliance has spent at least 12 man hours of repair time on the dishwasher, made a half dozen calls to your tech support (check your records), and has never spent less than 4hrs here on a visit. Once again, I have to be here for those visits (time out of my day) plus the stress of watching a brand new $1600.00 dishwasher dismantled time after time! At what point does G.E. make a decision that the amount of money being spent to repair a defective machine is not worth it?? I have to believe that 12hrs of repair time plus an hour of travel time for three separate visits each way, has already added up to the price of a new/replacement dishwasher?The other two G.E. appliances (microwave/Gas Stove) purchased with our remodel last year have performed flawlessly and we are happy with them. However, the trouble with the dishwasher has soured us on ever considering G.E. again! I plan on sending this E-mail and attachments to every consumer/watchdog group (Consumer Affairs) that Im aware of and to the store (Lowes- Farmington N.M) that the appliance was purchased at. This is not meant to be a threat, Im just at my wits end as to how to get to the end of this long tortuous journey that a simple appliance has caused for me and my family. Yes, there are certainly more pressing problems in the world, but right now this is the one that is currently affecting my family and the happiness in our home!Please advise if there is another route that I need to go with this problem including any alternate points of contact (GEs Escalated Issues department). My phone number is ** and maybe a simple personal call of apology from someone at G.E. explaining what my alternatives are would be considered? Thanks for your time and consideration.

GE MICROWAVE OVEN MODEL PVM 187osmcoz PROFILE over the range. This is the first time we have purchased an extended warranty. It was purchased October 2010. On December 6 2010, the whole unit was replaced. Then little things continued to occur. The fan would start to run continuously. The circuit board was replaced. That lasted for several months. Then another circuit board was replaced. Less than two weeks ago another circuit board was replaced. Last night at dinner the unit began acting up again. This unit is out of commission for almost a whole week after every break down as we wait for parts. While waiting for parts on Jan 24 2012 we bought a Sunbeam Microwave for $39.95 as a back up. I placed it in service today, Jan 29 2013.

I recently purchased a GE Profile 1.9 microwave oven from Home Depot less than a year ago. Last week I went to remove something that I had cooked and went to close the door and it would not stay shut. I ended up getting some masking tape to try and tape it shut in order to keep the light from staying on and burning out until morning when I could get a better look at it, thinking that it had to be something small that could be taken care of without any problem. Hinge adjustment, something getting in the way that I couldnt see, etc, etc. Wrong! I have been over this door with a fine tooth comb and there is nothing that I can see that is preventing it from staying closed, not only that but according to everything that I have read, I am very lucky that I didnt get fried while trying to figure out if the latching mechanism was functioning correctly. I am not even going to go through the long drawn out process of dealing with GE over this due to the simple fact that I have been there done that with my dishwasher that showed up with the front panel dented a few years back from the factory and I ended up blaming the place that I had purchased it through instead of GE and have since found out by reading other complaints that this seems to be something that is not unusual when it comes to GE appliances. I spent over 1100.00 dollars on the dishwasher and they only replaced the panel instead of giving me a new one, and I have never been satisfied with the way that it operates, and it was a very long and drawn out process and I am just not willing to spend the time again on another one of their products. It is unfortunate that we have entered a time where customer satisfaction means nothing, and the days of caring about having repeat business from a satisfied customer are over. The prices continue to rise on the things that we have become to depend on and cant seem to live without, but the quality and workmanship have not only diminished but also present safety threats. I will never purchase another GE anything and I am looking forward to the day when we all have finally had enough of this and do something that makes these companies stand behind the products that they sell and quits ripping the consumer off. Its rampant across the board no matter what you buy, and there should be laws in place in order to keep it from happening. We have laws for everything else, why not have a couple that protect the consumer and their pocket books.

I have owned my dishwasher for 5 years. Monthly, I use dishwasher magic to clean the inside, removing lime, minerals, rust and grease. The lower rack, under the silverware rack is completely rusted. I have used and owned dishwashers for over 35 years and not once has one rusted like this. Poor quality for the racks! I feel it should be replaced free of charge.

The way you put bowls in this model doesnt allow for cleaning them completely. You must wash the bowls AFTER cleaning them in dishwasher. Waste of time & money. Capacity smaller, noise louder. Not good value.

GE DE68 00307A microwave was bought in June of 2011. Last weekend, August 25, I was heating water and the microwave started smoking and then failed. The entire apartment was filled with chemical smelling smoke. I have a parrot and had to get her out immediately as this type of smoke is highly toxic. I had to keep her out all night long.

Dont buy one. I bought two last year. The first one completely died before the 60 days were up. I took it back to Sams club and bought another. The tag inside says it was made February 2011, so its only a year and a half old. Under the carousel, the paint is peeling big time. I wrote GE repeatedly, asking if it was still ok to use it. After ignoring me for quite some time, I got this reply. In the notice, they told me to get Sams club to replace the defective and apparently unusable product they are selling knowing it is defective. I love the part where you cant cook something with too much liquid in it. Who does that when they microwave?Heres what they said: Thank you for contacting GE regarding your microwaves and the paint peeling issue. I did some research on it and found that it a common issue among all brands. Excessive heating of un-covered liquids can create a high amount of condensation that the inside paint is not meant to withstand. Minor chips to the coating on the microwaves interior cavity will not affect the products performance. However, if the coating is actively flaking or peeling anywhere inside the oven cavity (including under the turntable), discontinue the use of the microwave and replace it. GE does not have an approved method of repair, and the microwave is not repairable. Please return to Sams club for an exchange, if you are still within the one year warranty. If Sams is refusing to accept the return, contact the Sams Club Support Team at 1-877-885-2787. GE will then reimburse Sams club.

The interior paint on the microwave is peeling causing there to be sparks in the interior of the microwave. The microwave interior paint is defective and should not have peeled. The microwave interior has metal showing which causes sparks.

We purchased a new home November 2013, which came with all GE appliances. The problem is the dishwasher racks. The plastic has fallen off the metal, and the metal has rusted away leaving nothing to hold the dishes in place. I contacted GE and they said it is out of warranty. A new rack is over $100.00 and now I see the top rack is rusting also. I have never, in my seventy-eight years such junk. I am surprised GE would put their name on it...

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

Don’t know the exact model type but it’s a built-in unit as opposed to a counter top type unit. It’s installed on top of a GE oven. Have had no issues whatsoever since purchasing the house in 2008. Barely no maintenance required aside from the normal cleaning of the inside of it and even that is pretty easy.

Purchased my GE Profile series dishwasher several years ago and it has served me well over countless cycles. There have been a couple of occasions that it required repairs (water leaking) but had been done so under warranty conducted by an actual GE tech. When this unit finally reaches its usable service life I’m most likely to consider a GE unit again.

GE appliances were installed in my new build home including a brand new, never used microwave. When we did our walkthroughs the microwave appeared to work (turned on, timer ran, etc.) but after signing we found out that the unit was a dud and the microwave emitter did not work so nothing was ever heated regardless of the run time. We have called GE several times only to get extremely rude and dismissive customer service reps (“Audrey” if that was even her real name). They refuse to replace a brand new unit that never worked and insist on trying to repair it, but we are also being told that this will take several trips as the technician will only first come to inspect it then a second trip will be needed to bring out the necessary parts (they don’t carry them in the truck because they are “fragile”). I’ll never be using a GE product again.

I have to agree with other post about the customer service. Our dishwasher is only 15 months old. First call went fine after that everything is with email. Tried calling several times to get correct parts shipped after only getting one of three needed, I called and finally after 45 minutes an agent answered. After several attempts to get recommended parts and repairs we are now having additional issues. The quality of the GE brand has really gone down compared to our older products that lasted 15+ years. Now waiting for a new assessment of what the issue might be and hopefully will be able to get the parts without issue.

GE Profile dishwasher - model # PWD8280N00SS - Appears that moisture got between the exterior panel and door that houses that main board. Because of the moisture caused a short that melted the main board, with harness and the ribbon from the on/off panel that connects into the main board. Luckily I was home at the time or this could have caused a significant fire damage in my kitchen.

We bought this GE Dishwasher through JC Penney with a 3 yr extended warranty in Dec 2017 thank goodness. I am on my 3 round of having the mother board and the heater replaced since I got this machine. This last tech came as a 2nd opinion for my claim that this machine has not worked more than it works. All we would do is load the machine, go to turn it on and out it goes. The warranty people sent out a GE Tech who ordered a new board and fuser kit and came to put it in. Same issue, he said it was my hard wiring and I should have a electrician look at it. 200.00 later not the hard wiring. It is a pin hole in the heater coil that this last tech found. New heater now on order. My faith that this will fix the problem is waning. After this my warranty will be up and I will Never buy a GE appliance again. Not worth the money.

I will NEVER buy another GE product. They were not helpful over the phone when I explained to them about the paint peeling on the inside of my microwave. Its only 4 years old & should not be doing this.

Model # JVM1752SP2SS - I have had my microwave for 5 years. Last night, my husband and I started smelling burning rubber. That lasted about 20-25 minutes. Then my husband heard a strange sound coming from the kitchen. When he went to investigate, he found our microwave on fire.

Just purchased a home with GE Appliances. Dishwasher suddenly wont start and showing 1H code. Nothing in the user manual that explains what this means. Called customer support. After they requested unnecessary personal information (like email address, physical address, etc.), I was finally able to ask what this code meant. She went straight to, We are unable to provide that information over the phone. We have to send one of our service technicians out to your home. She refused to tell me what the code meant, and instantly wanted to charge me for tech visit. I hung up. Then I googled it, and found out right away that it meant the start was paused/delayed for 1 hour. I had hit the delay button by mistake. This was not specified in the manual under Delay Start, nor was customer support trained or willing to provide the answer to such a simple question. GE Support is just a Scam.

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

I am using a GE Profile Spacemaker 2.0 microwave that is almost 8 years old. I loved using this microwave until the touchscreen cracked under normal usage. Has anyone else had this problem?

Most microwaves Ive tried are pretty similar in performance, except in the case of cooking microwave popcorn. Most are horrible with their preset popcorn button. However, the more expensive GE model that I bought from Lowes has done the best in that area. And, it is one of the better looking models also. I prefer the stainless ones.

My experience with GE over range microwave oven (built in) as follows/ Unit Mod.JVM3160RF3SS. Ser.#GG248367A, this unit was produced April 2016. Review February 28, 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. New home with dedicated circuit = Yes. Online Problem shows indoor sensors interlocks not adjusted properly. Troubleshoot fee minimum $99 with parts estimate $250.00. We have been limping along for two months with frequent trips to basement resetting breaker, now the breaker trips when activated. Same thing happens on multiple circuits, via extension cord trial. Next step purchase NEW MICROWAVE that is not GE.

We have had this GE dishwasher model GLD6760N00SS for about 9 years and it was fine, until a few nights ago!! We ran the dishwasher, unloaded it, closed the door and went out. When we returned about four hours later we were met in our apartment lobby by the building manager who informed us that we had a fire in our apartment. It started in the dishwasher, which was off, and destroyed the unit. Repairs will be costly due to fire restoration required as well as the need to now replace more than just a dishwasher. Soot covered the whole apartment, and left a need to get a new kitchen floor and repair/replace some cabinets. Be careful of this model from GE.

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

This is what transpired on the with GE: I called GE Service because the Magnetron is defective. I had trouble talking to anyone because the Serial Number label on the unit is BLANK. Also, the unit is 9 years old. However, my owners manual reads additional nine-year limited warranty. The customer service rep said the additional warranty is 5 years and GE WILL NOT honor the GE printed manual I have. I was escalated to a supervisor and the first thing she asked for a Serial Number to schedule a service call. I said no, all I want is a new part and she responded cant do that and I cannot schedule a call without a serial number. Hello, the label is BLANK. We went back and forth, getting nowhere and I got angry (I hope can recover the call), she is an IDIOT!Well, opened up the unit and lo and behold it isnt a GE part. I got on eBay and purchased the DAEWOO part (the magnetron the microwave was built with) a lot cheaper and repaired the unit myself. Oh, she said you cant do that. Sounds like Big Brother is alive and well at GE. I dont expect a response since I have been dealt with by the most inhuman people at GE!

Just two years old, the interior paint in my GE Microwave JES1072SHSS started to peel. I called customer service, then emailed, learned that the paint peeling posed no health problem, then, as a gesture of goodwill, given a $75 rebate. I foolishly bought yet the same microwave today (and will return it) as I read here on this site: not only is it unsafe to use a microwave with peeling paint, GE had a class action suit over this very issue and never took responsibility for the health risks to loyal consumers. So it gets returned this week. But PLEASE BEWARE. Gosh, I really bought the goodwill - hook, line and sinker! Then I read all the complaints here - about peeling paint.

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

We were super excited to get this GE Profile Cafe dishwasher. Minus the brand, it was the exact design/style as the one my dad has which we love! First issue, dont have a name of a dish liquid if you cant use all of them. Cascade apparently makes different detergent styles for the smart dispense. Dishes were ridiculously dirty and the horrible thing is I couldnt find an answer why on GEs site, I had to go to a handyman site. That was about a month and a half ago. Today, I did the dishes and, of course, let it do its thing. I always have the heated dry on by the way. Well, dinner came and I grabbed some dishes out which were screaming hot and I had to use an oven mitt. I didnt think anything of it because sometimes Im a sissy about that. Well, its now 3 hrs later and I get up to the smell of burning plastic. My first thought was that the sippy cup straw fell on the heating unit. I did not, however, expect to open it and see the Tupperware melting, the silverware rack melting and the water bar to be melting to the heating unit and it being so hot that I have to use an oven mitt just to touch the freaking rack. Oh! And by the way, we bought this off Craigslist last year and it was brand new. It still had the casing around it from the store.

I am now facing my 5th repair appt about my 2 year old microwave. I have spent nearly $300 on repairs to be told I can purchase a new one for 50% off. Well, $426 plus my $275 I have paid IS A NEW One! 20 hours of me having to be available for service. I did not know the life of this appliance was 2 years. GE complaint number **. This is an unacceptable resolution offered by GE!

Updated on 06/28/2021: Nearly 8 months plus my mother waiting for dishwasher and now its the wrong one. Store where she bought it made a mistake. I didnt catch it till the dishwasher broke, She originally got the right machine but store marked it wrong on the invoice. Now on top of this the brand new dishwasher doesnt even work. It has a E4 code indicating a leak. Waiting over a week for serviceman. It always because of covid is the excuse for shabby service.Original review: I have never had such a problem in my life, first you have to phone then its either they put you on hold or transfer you to a voice mail. This is ok service until something serious happens then all of a sudden you dont get any call backs and stall tactics and simply dont listen. My mother bought expensive GE Profile dishwasher with 5 year bumper to bumper warranty that means nothing, I cant get through, tried to send form there no way to send it just a clear button??? Its supposed to be at least in contact within 48 hours to 72 hours. I have given them extra time due to Covid but I BEGINNING TO BELIEVE THAT IS JUST ANOTHER EXCUSE FOR THEIR TARDINESS. THE WARRANTY IS Excelsior guardian angel plan.

I called to see if someone can help me figure out why my built in microwave is running but no heat. Apparently the customer service keeps insisting I need to schedule a service without offering any kind of help. Why do I have to pay for a service trip when I can fix it with the right part? Unlike other appliance they always have customer service helping to see and figure out what might be wrong to the appliance.

I have an above range GE Microwave - it is not even 2 years old and it is done. I noticed the past few months it was not heating properly - it needed more time. This week it just blew out! NO more GE Microwaves. I have a refrigerator and I am wondering how long that will last. Thank you!

In 2008, after waiting 30 years, we remodeled our kitchen using both a GE Range & GE OTR Microwave, model # JVM1850. Last week, it started making a loud noise when started and wont heat. From reading online it sounds like the magnetron went. Everything else, fan, turntable, lights inside and outside work, but wont heat. I called in for service to find that it would cost $89.95 to have them come out to diagnose it. Also read that a magnatron is between $150 - $200, and used to be warranted for 5 yrs. New GE microwaves only carry a 1 year total warranty. So they know they are supplying junk to us. Had to just bite the bullet and replace it. People cant afford for appliances to only last this long, at the price they are charging. I am not only upset at having to spend another $450 only 6 1/2 years later to replace a microwave that was lightly used, but GE has chosen to change the look as well, so it no longer will match the range it sits above. When I was remodeling, I read so much about matching appliances... not matched anymore. Totally disgusted.

I like the design. The color works well in my kitchen and the oven works perfectly. It is just the right size and fits in the corner of my kitchen. I have no complaints.

The one thing I would change on this model is a top rack sprayer. The rack sizes are nice. The bottom rack holds pots and pans well, but top rack dishes need a good pre rinse before washing.

The protective lining inside the microwave is coming off in a number of areas and the metal is visible and rusted. Is it hazardous to use the oven which is otherwise working? I contacted the Consumer relations department of GE and was told that its not repairable and offered only $25 as rebate to buy another one from them or any other retail store. I visited a couple of merchants, online and in their store, shopping for a similar product and got a price range between $250-450 plus $110 installation fee for a similar OTC microwave oven. We have all other appliances at home from GE and this does not give a good confidence about the products from GE.

I had trouble from the beginning; the dishes came out hazy. When I called GE, they said to use the recommended detergent; I did. The dishes came out hazy and smelled like detergent. They messed around long enough with that and getting someone out to fix the controls, which did not work properly, until enough time lapsed and I could not get a refund. The dishwasher turned itself on after a power outage. It was not running when the power went out and was running non-stop for God knows how long before it was noticed. This happened at Thanksgiving time, and they had service out at 6 weeks so I had to do Thanksgiving dishes by hand. After that, they postponed for another 2 weeks. I got a replacement dishwasher, thanks to the Home Depot Manager. The dishes come out stinky and hazy; sometimes, there is visible soap residue on the glassware. I even ran the dishes through a second no detergent cycle and still had residue on the dishes. The controls do not work. We have to turn the power on and close the door 3 or 4 times before it will come on. We are afraid to leave the circuit breaker on when we leave as we are unsure if it will start on its own like the first one did. It is also the worst designed layout for loading any dishes. This is totally unacceptable as soap residue causes intestinal difficulties, and you should not have to be afraid that your dishwasher will take on a life of its own and start. I highly recommend you do not waste your money on this dishwasher. GE has extremely poor customer support. Home Depot support was great. This makes two GE Profile Dishwasher in less than a year and two strike outs. They will not get the chance for a third out. We are getting a KitchenAid.

Its been more than 2 months that GE repair has been TRYING to repair my 4 month old dishwasher. 4 service calls, 3 wrongly ordered parts, GE blaming repair company, and repair CO. blaming GE. The repair company on their 4th visit told me wrong part again and that they refuse to come out anymore. They lost enough money already. When talking with GE consumer Dept. promises of a call back by a manager has been non existent, now they wont even return my call. I have a 5yr extended warranty on the dishwasher and I cant seem to get anywhere with the factory warranty. GE by far the most unprofessional company I have ever dealt with. They were happy to take my money for 4 top of the line appliances, after that youre non existent to them. Its a shame that legal counsel is what seems my only avenue. Will never consider buying GE products ever again.

The performance of my microwave is great - not fancy but does the job. Its size is fine as it fits just right where we wanted to put it. No complaints. I havent had any problems, therefore I consider it a great value. Plus, I would get the same size if and when I replace it!

We first noticed a problem with our two-year old dishwasher when the lower spray arm broke. Soon after, the door seals started to leak, and we noticed the seal at the bottom of the door had completely degraded becoming brittle and breaking off. Our warranty had expired, but I contacted Mabe. They agreed to replace the parts free of charge, which amounted to approximately $300. I expressed concern that the dishwasher may have been overheating, causing the above problems, but this wasnt given credence as the technician didnt speculate in his report on the cause of the damage.Within the next month, we had a massive water leak. Upon inspection, the dishwasher showed signs of extreme heat. The sound insulation had bubbled and melted off much of the exterior of the tub. The electrical supply cord had a scorch mark. Once again, Mabe was notified. After much negotiation, they agreed to refund the price of the dishwasher. Initially, they had offered a certificate valued at 50% of the cost of our dishwasher towards the purchase of another GE dishwasher. This offer was declined as we wont have another GE dishwasher in our home unless were convinced theres no fire hazard.There are significant repairs required to our home due to water damage but we consider ourselves lucky to have avoided a fire. GE has had problems with their dishwashers in the past which resulted in a massive recall. Its time for them to acknowledge that there is a problem with the Cafe line and take measures to rectify the problem before someone is injured.

I recently purchased a GDT696SSFSS Serial #SWGF800933C GE dishwasher. From the moment I tried to use it there was a leaking water to the floor from the back wall. I contacted the store that referred me to GE stating that their role ended when we received the dishwasher (long story..). I called GE service and when they came the technician said needs seal mat and offered to repair (the dishwasher has been installed in the garage since the water that comes out flood the kitchen floor and we cant afford having the floor damaged). But I had no faith whatsoever in this dishwasher (I was told if the problem happen again and damage my floor they will only offer to repair the dishwasher and I have to go to the insurance to repair my floor) or GE and said I wanted my money back. They did not even offered a replacement. It is still a brand new machine, I never use it.

We bought a model PVM9215SK3SS microwave as part of an over-the-range microwave oven/extractor fan combo. Unlike every other microwave combo weve ever had in our frequent moves, this microwave cannot run the kitchen timer independently of the microwave. If you try to set the kitchen timer when the microwave is running, the cook-time changes and overcooks whats in the microwave. If you try to set the microwave to cook while the timer is timing a food cooking on the range, it simply refuses to work. The instructions are very hard to both find and then understand, having been written in China to cover many different models. Apparently I can ask my phone to turn it on. I sure cant manage that very often in person! The fan is too loud for comfortable use even at the lowest speed, which is a great disappointment. A former Profile model was very quiet at every speed, and much more efficient. Were saving up for something that works.

Microwave Model JVM1750DP2bb defective construction- Plastic is protruding inside the Oven. Took possession of a new home in January 2014, but only occupied part time. I estimate we had the equivalent of 6 months being occupied. In January 2017 the magnetron broke down, at which time I noticed a piece of plastics protruding inside the microwave through a vent hole on the Magnetron side. I did not take the extended warranty and GE only offered to send a repair man. Since this is an over the stove model venting outside, it had to be repaired or replaced. Checked with the supplier and they estimated a minimum of $ 300 repair cost. Home Depot had model JVM6175DKBB on sale for 249.00, and with delivery, and installation, were talking $ 350.00 to $400.00 to replace. I got in touch with GE Consumer Affairs, and they did eventually agree to provide the JVM6175DKBB for $ 270.00 including installation. They will take possession of the old model, so there wont be any way for me to confirm or deny a manufacturing defect.

Have used GE dishwashers before - were good. However GE no longer makes them, its just a name - now made by MABE (part of HAIER), Mexican with Chinese ownership, and this new one arrived with a factory fault - cracked tub which leaked immediately. Cracked tub seam and leak found immediately by service tech GEs site referred. Good news is the leak detector worked! Bad news - is we didnt install it right away (old one still worked and pandemic...) so it was a year before we got to it (was partly a gift). So - now MFR Mabe is giving us the run around and so far not doing anything about the faulty dishwasher they mfd and shipped through Home Depot. Dont be fooled as we were - GE is not actually GE anymore and the mfr HAIER/MABE are doing nothing to correct a factory mfg fault.

While the microwave works fine, as far as microwaves go; it does heat unevenly but eventually gets the job done, the interior is cracked and shows signs of rust and deterioration. I dont remember ever seeing this on in previously owned microwaves. I would only use it for basic heating and reheating.

GE microwave turns on by itself, creating a fire hazard. We could not figure out how our plastic plates melted, until we witnessed the GE microwave turning itself on by itself. Also filed a report with saferproducts.gov. It may have to take a death of a human to have this dangerous product recalled by GE. Great business plan, GE!

I bought a whole line of GE Monogram appliances for our home in late 2005. These appliances are not even seven years old and I have had the side-by-side fridge repaired several times with no true fix to the problem. They charged me to repair the tank in the fridge that the water line leads out from and into the freezer door. Another repair man said that was never the problem and that the seal on the freezer door is broken from inside the door (a common problem) and freezes up the water line, so no filtered water comes out. They wanted to charge me $800 for a new door with no guarantee that it won’t happen again!My cook-top downdraft has shorted out three times because of a faulty design issue. Water and moisture can get up under the switch, which shorts it out. There were three different repairs for the same issue. Last time the same service man repaired the problem and he was so careless. He got silicone all over the granite counters and switch, which he didnt check before leaving! I called him back to my house before he even got out of the neighborhood. Ultimately, he admitted he screwed up and ordered me yet another switch. Now, just today, my Monogram dishwasher started billowing black smoke. I called GE to find that the unit has been recalled for electrical shock and fires. They said I could have it repaired (if the service man deems it repairable) or it’s $400 towards a new unit. Is this company for real? How many consumers do they have to lose before they wake up? If I werent home my house could have burnt to the ground or, worse, one of our kids or us could have been severely hurt or worse. Do they not realize the liability they would have at that point if the worst would have happened? And they have two phone numbers and my address on file. Why on earth would they not contact me to tell me of the recall? Are they holding their breath and crossing their fingers that nothing too bad will happen? I have a Whirlpool fridge/freezer that is 18 years old and in my garage; nevertheless, it has never given me an ounce of trouble. I will never buy another GE appliance again and will tell anyone I know the same, including the several new home builders I work with. There are too many other companies out there that will back up their quality products. I have called into GE on my latest problems. And if I dont get satisfaction (i.e., brand new units), I have no issues contacting the attorney general. There are forms online that can be downloaded so a formal complaint can be filed. I urge anyone else to do the same.

I purchased a microwave in Oct 2010. It went blank and nothing works. I checked to see if its receiving power. The power is okay. I purchased the microwave, fridge and stove at the same time. I always had confidence in GE products. Microwave should have lasted longer than less than 2 years. I didnt purchase extended warranty because of GEs reputation. Very dissatisfied customer.

I have two of these in my kitchen, just about 3 years old. They have NEVER dried the dishes and I have ALWAYS had to thoroughly wash the dishes because otherwise they dont get clean. One has completely quit working now.

In January 2010, I bought a sensor cooking microwave oven (Model: JES1460DN1BB Serial #: MS900742B). I paid almost $500.00 for it. Now, in less than two years, the inside is already clipping off so it is dangerous to use. I returned it to the store and was told that the guarantee was good for only one year. So, I would have to pay to have it repaired. My last microwave (before GE) lasted well over 10 years. I always thought that GE was a good company; I guess not. I feel that it is their fault. I seldom use the microwave and I even clean it with a damp cloth. I do not think that I should have to pay for the repairs and I should be given some kind of a discount on a new one. I feel that GE is now in the business of making effective appliances. They should stand behind what they make.

Bought the new dishwasher in Dec. 2013. In November 2014 a month shy of warranty expire, the detergent dispenser did not release or partially released the detergent. GE sent out A&E Factory service to fix. First visit initiated the parts order which was a new computer board and a Cascade Series detergent dispenser. A month later the second visit to install parts, the A&E tech was at our home for 3 hours and it took that long to remove and replace detergent dispenser. The tech did not replace computer board stating it was not needed? A week later the detergent dispenser still did not release the detergent! Called back to set up another appointment which was at the earliest Jan 19th 2015. Meanwhile last Friday Jan. 9th 2015 the dishwasher started to smoke heavily causing smoke detector to go off at 9 p.m. at night. Thank goodness!! We were home so that I could disconnect the power. Third visit was 1/12/15 and was informed by Lead A&E tech that the board should have been replaced and that the tech that was sent out was a trainee and inexperienced to work on my dishwasher. He should of never worked on my dishwasher(!!) according to the Lead A&E tech. The Lead A&E tech also stated that my model has had a problem with the computer boards which is essentially the brain of the dishwasher. I am currently taking my fight back to GE since A&E Factory is a subcontractor to GE and is not authorized to replace appliances. I told GE that I want a new dishwasher that is not using the problem computer boards even if it is an upgrade. It is not our fault that they have work with A&E who send out inexperienced techs to work on complicated GE appliances. We want a dishwasher that we both feel safe to run while we are not home. Is that too much to ask for?

It works really well and this price point is good. It’s lasted me a few years and it is still in new condition. It has a nice modern look also. Good microwave for a great value.

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

My microwave is only 5 years old. It is burned out electronically. I would never buy another GE product. My GE Profile stove needs a $300 repair after 4 years.

My dishwasher is doing the same thing as the recalled models. The GE Cafe model is not included in the recall. The dishwasher front, which is stainless steel, becomes so hot it burns to the touch and stays that way for hours. Burning smell in the kitchen! Cafe models need to be added to the recall!

I bought a brand new GE Dishwasher GDWT308VBB delivered October 3, 2012 which promised: 5-stage filtration with Piranha hard food disposer, 5 self-cleaning filters ensure clean dishes, dedicated silverware jets, highly pressurized spray jets target the silverware area for improved cleaning; steam prewash - loosens tough soils before any cycle virtually eliminating the need for soaking or pre-rinsing dishes; auto wash cycle - cycle automatically adjusts to soil level to maximize energy savings and ensure clean dishes; natural convection heated dry option, a drying element effectively dries dishes reducing the need to towel dry after unloading; 52 dBA sound level - nearly silent two-pump system cleans dirty dishes without disruption. No matter which cycle or combination of features I use, my dishes have yet to be cleaned. Contrary to advertising above, I do need to rinse dishes prior to cleaning in dishwasher and also rewash dishes after dishwasher cycle is completed. I previously had a Maytag which at 15 years old performed better than this new GE Dishwasher. I have written GE describing my dissatisfaction and expect their promises to be delivered.

Purchased a GE over-the-range microwave worth about $400. About 2/1/2 yrs in it stopped working. Had a GE repairman come out to fix it. They charge $95 just to come out. I complained so they gave me 50% off parts and labor after the initial investment. It took him about ten minutes to pull out the defective part, a $10 thermostat which he replaced. Total cost: $162. Ive had GE products for years but the new ones are much more cheaply made IMHO. Made in Malaysia. In addition, the handle is breaking off as are plastic parts coming of the top of it. I guess Ill consider getting extended warranties from now on because these products are cheap. If Id had it longer, Id have bought a new one instead of fixing it.

Super sad about the performance of this dishwasher. This is the second leak in a year. The first time my husband fixed with new GE pump because we wanted the dishwasher up and running and the scheduled repair time was out more than a week. We were also told there would be no reimbursement to the damage to the brand new floor that was damaged. This time I REFUSE to have him fix the dishwasher even though once again the repair time is out more than a week. The cost of this dishwasher should warrant a functioning product.

Entire inside is plastic crap. Dishwasher is very loud and takes a long time. Racks are ok but cheap feeling. If I was choosing, I wouldnt buy it. This GE was in new house. Overall feel is very cheap. Too much plastic. Very low end builder model. Steel inside or heavy plastic will take more beatings.

I bought a GE dishwasher 2 years ago. The control board went out so I had a repairman come to fix it. They had to order the board from GE directly and it took 1 month or more to get the part. Then it lasted one day! Now they are telling me it cant be fixed. Really??? I expect a dishwasher to last longer than 2 years. I also bought a GE microwave that only lasted 2 years. I replaced it with Whirlpool. GE is crap now and that use to be all I bought. Not anymore. I will never spend any money on GE appliances any more.

We normally purchase LG appliances but this time we purchased a GE Profile induction range and GE Profile above range microwave oven. The relay went out on the microwave oven about six months after we got them. Their website for scheduling service is absolutely horrible and didn’t work multiple times and when I was finally able to schedule, it was two weeks out. I then called but was told I couldn’t get an earlier appointment. So we waited the two weeks, then they had to order the relay. GE waited until the part was delivered to us to schedule the return visit - over 2 1/2 weeks later! So at this point we are without our new microwave for over a month and a half. Moral of the story is never ever to tempted to buy from GE, LG appliances & cust service are great.

I have purchased a GE microwave/convection oven 7 months ago. A month ago, the control panel broke down and it would not turn on. I called up customer service and a technician was sent after a week. They have diagnosed it and the motherboard needed to be replaced. The said part was ordered and I was told it would be delivered in 2-3 days and a service will be scheduled in a week. A week came and no parts showed up. I have called up customer advocate and they assured me the said part will be delivered in time for the service appointment.Unfortunately, when they came, the said parts have not been delivered and I was given the lame excuse of systems failure; the request has not gone through their system. So the technician assured me that he will put in an overnight request for the said parts and the oven could be fixed within the week. He even gave me his work and cell number for me to call if I have any inquiries. But he never picks up or even returns my calls. So another service appointment was scheduled and parts were delivered, only to find out that it was the wrong parts, supposedly for another customer and for a different microwave model.Its really frustrating when people keep on reassuring that they are going to get it done, but has done nothing but lip service. Its been over a month and my microwave is still a broken microwave. I have learned my lesson and will never again in my life time purchase a GE appliance. PS: I should have listened to the Home Depot guy that sold me this microwave.

Looks great after 7 years, still works good. Could use larger drawers and the soap dispenser hasnt opened a few times. After 5 years of use weve had to rerun the to clean the dishes.

GE built-in oven with microwave on top in white color, model no. JKP90CMICC. Microwaves outside door is peeling off in chunks. This is a manufacturer defect and I have contacted GE to see if they will stand behind their products quality and replace this door of the microwave. I have heard so many negative things about GE customer service so I dont have much hope but I have to pay to replace this poorly constructed door. I will never buy another GE product and I will spread the word on how they treat their customers. I will post again when and if I hear back from them.

Five years ago I purchased a brand-new condo w/ a GE Nautilus dishwasher installed. This machine has NEVER worked right. Issues: 1. The detergent cup that closes, consistently gets stuck shut, hence only half of the detergent gets dispensed and a second cycle is usually needed to get the dishes cleaner. 2. Dishes are never really clean. Theres always at least one dish that has something left over on it, but its usually multiple dishes. 3. Lower rack started rusting out after 3 years of very light use (used approx 3-4 times a month). Loud. Louder than my washing machine. 4. Replacement parts are ridiculously expensive. A new lower rack is approx $100. My condo also came with a GE refrigerator. It too is junk. Never again...

My dishwasher is a GE Profile. It is as quiet as a Bosch we had in another home we had but it must cost half as much. We have it 8 years now- no problems. Never had a service call or anything wrong with it. It owes us nothing.

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.

It is very quiet and does an excellent job cleaning. I really like the new slate finish on the front panel. It has a stainless effect but does not show marks as well as SS and is very easy to clean. Great design, the top rack is adjustable and the use of internal space was well thought out. Very simple / uncluttered and I like the control mounted on the top door feature. Dont recall the model number. The washer was in the $650 price range which is sort of in the middle but has a SS tub. In my opinion the performance and features are no less than more expensive brands / models.

My microwave was purchased 2.13, costing about $500. The panel shorts and I paid for one GE visit, $150. And it happened again. My friend was here and said hers does the same thing. She has a neighbor with the same problem. I researched online and learned quite a bit about this machine. I found out that the panel shorts when youre cooking under it, and steam/heat rises into the machine. Makes the panel short. Im now demanding that GE return $150 service fee that I paid before I found out that its a defective machine. And this machine has to be replaced with a model that allows cooking with vents on. If GE does not do the right thing, I will make it a life goal that no one buy their products. Mark my words. Im this angry because I called customer service this week and was told that theyll give me a new panel but I have to pay for the labor and no refund for the $150 and no replacement microwave. This was insulting. Shame on GE.

We purchased this dishwasher for our rental. The last dishwasher was over 30 years old and still working but the racks were coming apart so we opted for a new one from Home Depot. A year later our tenants called saying when they used the dishwasher it rained in the basement. Our maintenance man called and said the dishwasher melted a hole in the right side about 1.5 inches by a 1/4 inch. Midway to the heater element. He did a temp fix with silicone.I called GE Recall number and was told it was not on a recall list. I called customer service and was told they would waive the service call. I explained this was a FIRE HAZARD. They insisted all they could do is send their tech out for repair. Since I paid about 280 dollars for the dishwasher I decide a service call would probably run near that and told them NO! I am now sending all information to consumer affairs department with my STATE REPRESENTATIVE. I also am putting the fire hazard info out there on facebook and twitter. I am waiting for someone else to say they also had a fire hazard. This should be on a recall list!

I wasted my whole day waiting for GE Technician to come. Nobody called me to let me know that they are not coming. I have to call them only for a Mr. ** to tell me that they had rescheduled the appointment for another one week without notifying me. Good job that GE APPLIANCES are doing. You remember the so called TOO BIG TO FAIL? It means, they can do whatever they want at whatever time or day they want. I dont have a vent in my house and that means I cant use the stove. Is this ridiculous or I am missing something here? Is it TOO BIG TO FAIL? Yes, I forgot that. I will be staying in a house with a new GE APPLIANCE that has not been working for the last one week and have to wait for another week. Mind you, this Appliance has been used only for barely a month. Is there anybody out there who is facing the same problem or its just me. If there is nobody going through the same experience, an excuse like there are no Technicians available to come to your place and do the job. If there is anybody out there who has trust in GE appliances like I did or even thinking of getting one. Be aware that you will be through what I am going through and there will be no technician available for another two weeks. Be ready to wait for they will reschedule your appointment without letting you know, why? Because theyre TOO BIG TO FAIL. What will you do? Wait until they decide to come, if theres a technician available. I just realized that GE means GO ELSEWHERE. Thanks GE for the good job.

All I wanted to do was eat dinner with my husband and I wound up on the internet for an hour trying to figure out how to make our microwave work. There is some kind of thing that locks you out of using it. Very frustrating when you just want to eat dinner!! Nothing works and you have to google how do you unlock this piece of crap that you paid good money for and trusted the GE label. All we ever use is defrost food or time cook vegetables. If you want a complex computer, go for this thing. Otherwise, I suggest you go for a simpler microwave that you can depend on to work.

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

Our dishwasher has only ever served as a dish wetter or drying rack. It has NEVER CLEANED DISHES UNLESS they were put in the dishwasher already spotless. We have a GE Slate with hidden controls. Now, the racks are rotting away and the cost to replace them is nearly the cost of the entire unit. We are going to throw this one out and get a new dishwasher of another brand. DO NOT BUY GE DISHWASHERS!

My husband ran our 4-year old GE stainless steel dishwasher (PDW8980N00SS) at 9 pm, 2/4/13. At 11 pm, he emptied and put away the dishes. At midnight, we went to bed. At 4:50 am on 2/5/13, we were awakened by a burning smell and discovered the heating element of the dishwasher either turned back on or never turned off. We were unable to touch the granite counter, the front of the dishwasher, and both wooden cabinets on either side of the dishwasher were very warm. The spinning arms and other plastic parts were melted. The only way it could be turned off was to unplug it from the outlet in the cabinet. We were leaving for the airport at 7:30 am on 2/5/13, so needless to say, we would have lost our home if this occurred a couple of hours later. The Assurant tech said it was repairable and ordered a part, which would take at least a week. Assurant customer service had us call GE. When we stated we didnt want the faulty dishwasher repaired, but wanted a new dishwasher, the best the GE customer service rep could offer us was 38-40% off several new different Profile dishwashers. After reading page after page of bad reviews, most of which detail either one or multiple fires from different GE dishwashers, we dont even want another GE dishwasher in our home. We already needed the smart soap dispenser replaced, since it clogs periodically and doesnt wash dishes very well. We also have a countertop GE Profile microwave, and the turntable motor has gone out 3 times so far. Weve purchased the replacement motors ourselves since it isnt under Assurant insurance. Not sure what the resolution will be on the dishwasher, but wed be happy if GE would give us at least $500 toward a different brand dishwasher. I know well never ever buy another GE appliance after this. We wouldnt sleep at night or ever want to go out of the house without unplugging another GE dishwasher, so dont want one.

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.