We purchased our new GE Over-the-Range Microwave (model HVM1750DPWW, 1.7 cu. ft.) for $269.00 in February of 2012 and in August of 2013 it started to malfunction. Specifically the microwave would start on its own whenever we would OPEN the door. Now the microwave does not work at all (with the door closed or open). Based on the feedback that I have read in some of the posts on this site, I will replace the microwave since the maker can no longer be trusted to manufacture units that are robust and safe. But what manufacturer can be trusted at this point? It is my understanding that all microwaves (from all major companies) are currently made overseas with poor materials and highly suspect safety and quality standards. (Note - previous GE Microwave [same type - over the range] lasted for 14 years.) Thanks to Consumer Affairs for allowing us to post unfavorable reviews.

I have a new GE profile model PDWT380VSS - Two in fact. The first one kept breaking glasses in the top rack. GE technicians could not find an answer so they replaced the Dishwasher. Now six months later its doing it again. This replaced a perfectly good, older model as part of a remodel. Theyll be sending another tech who I suspect will not have an answer. Any thoughts on what could be causing this or a way around it or is it to be expected? The first GE profile I had for several years with no such issues.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

Renovated the kitchen and installed a new microwave. 2 adults in the house. First one lasted 4 1/2 years, too much to repair so bought another one. Because of the configuration of the cabinets we were limited to this dimension of microwave. Second microwave lasted 22 months, too expensive to repair. Now into our 3rd microwave. What has happened to quality products??? Everything now is chinese junk. So much for general electric formerly known for good quality, long lasting appliances.

SOLVED: PDW9980L00SS GE Profile Dishwasher not cleaning dishes. The rubberized sump of this dishwasher suffers from chemical deterioration. In our case the deterioration allowed waste water to bypass a check valve and return into the wash water. Dishes dont come out clean and the spray wands get plugged up with bits of waste. The solution is to replace the sump. If youre handy with tools its an easy DIY job which requires pulling out the dishwasher and turning it on its side for access to the sump. Lots of videos online re the process and for safety start by shutting off the circuit breaker for the dishwasher power. For our model the new sump part number WG01L00289 replaces the original WD18X10026. Dishes & glasses now sparkle. Hope this helps as there was lots of frustration on this end before replacing the sump seen in the photo.

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

2years and 2 months GE Model JVM1540 microwave purchased at Sams quit heating. Everything works other than it does not microwave, GE customer no-service says the part magna something is covered for 5 years, however the labor is not. I offered their customer no-service dept. a deal. If it was my fault the MW broke I will pay the entire cost to fix it but if it was a defective part, they have to pay the entire bill including labor ( which is the right thing to do). They declined to do the right thing.

The microwave oven that I’ve been using works real well and it’s not that expensive. It’s also a convection oven at the same time. The only reason I didn’t give it a 5 is, I rarely give that high # to anything with rare exceptions.

Weve had our new over the stove microwave (GE Profile Microwave Oven PVM2170SR1SS) just over one year and the oven light went out. The owners manual has no information about how to replace the light. I called GE customer assistance office and they said it requires a technician to come to the house to replace the bulb. A service call would cost around $95 minimum. This is a ridiculous requirement to make consumers do a service call for an oven light. The owners manual does show how to replace the charcoal air filter, if you use one, by removing the plastic cover across the top of the oven with the door open. Guess what? I removed the two screws holding the plastic cover and sure enough, there was also the access to the cover to access the oven light. You just remove the one screw and the small cover plate can be removed! Be sure to turn off the power to the oven before removing the small 50w Halogen G8 light bulb (Home Depot $5.00). My complaint about GE is that they do not give the homeowner information about replacing this oven light, but instead require you to pay for a service call. The irony is that the owners manual tells you how to access the filter by removing the plastic grill and thats how you also access the panel to replace the oven light bulb. They also tell you how to replace the light bulb that provides light to your range, so it cant be a safety issue about replacing light bulbs. Requiring the consumer to request a service call for $95 just to replace the oven light, when GE could have easily put the procedure in the owners manual, is a real consumer ripoff!

I purchased a GE Profile stocks in 2007 and a GE microwave model JVM7195SK1SS purchased 12/30/16. We have replaced the knobs on the stove 2 times because of peeling in the past. Now we need to replace the microwave handle. The handles and knobs look like metal but they are cheaply made white plastic covered with a sharp silver coating that peels. It appears the knobs get overheated when the oven opens and the microwave handle from the steam when cooking on the stove. Last night I cut my hand on the handle! We reordered the faulty handle and now getting charge $100 from GE. The company should take responsibility for their poor design and replace it for free with a nonpeeling part. I know that we will get the same handle and won’t be able to use the burner below or hope that using the fan will keep it from cracking again. I would never recommend a GE product again.

I bought the GE microwave from a GE dealer. We were very impressed that it is also a convection oven. It bakes, microwaves and even toasts bread. The oven had not disappointed us any way. I would recommend it to anyone in the market for a microwave.

We were super excited to get this GE Profile Cafe dishwasher. Minus the brand, it was the exact design/style as the one my dad has which we love! First issue, dont have a name of a dish liquid if you cant use all of them. Cascade apparently makes different detergent styles for the smart dispense. Dishes were ridiculously dirty and the horrible thing is I couldnt find an answer why on GEs site, I had to go to a handyman site. That was about a month and a half ago. Today, I did the dishes and, of course, let it do its thing. I always have the heated dry on by the way. Well, dinner came and I grabbed some dishes out which were screaming hot and I had to use an oven mitt. I didnt think anything of it because sometimes Im a sissy about that. Well, its now 3 hrs later and I get up to the smell of burning plastic. My first thought was that the sippy cup straw fell on the heating unit. I did not, however, expect to open it and see the Tupperware melting, the silverware rack melting and the water bar to be melting to the heating unit and it being so hot that I have to use an oven mitt just to touch the freaking rack. Oh! And by the way, we bought this off Craigslist last year and it was brand new. It still had the casing around it from the store.

Ive owned my GE Profile dishwasher for 6 years. Two months ago the pump had to be replaced and this is quite an expensive item. Then the other day I went to open the dishwasher and the doors spring gave away, hence slamming to the floor and crushing my big toe. The repairman said it was not the spring that broke but the link that holds the spring in place. The spring is actually quite strong but the link is just a flimsy piece of plastic. We are both anxious to see if the replacement link he ordered has been made stronger and are replacing both just to be sure it doesnt happen again. Although my toe isnt broken, it is extremely bruised and painful so I am going to be ever cautious of opening the dishwasher again.

Have a GE dishwasher put into operation June 2016 (new home). In Oct 2016 we noticed a leak and a serviceman came out and identified a loose soap dispenser - tightened it. Next time we used it, leaked as before. Same serviceman came again, this time replaced both the main seal & spinning water distribution wand assembly. Again, the unit leaked and on Dec 14th same serviceman replaced the soap dispenser. Before he got too far down the road, we called as the unit again leaked. He blamed it on excessive soap suds - which he removed manually. Following his departure, we again experienced a leak. Same serviceman returned on Dec 15th. After review, he advised us the DW would be replaced and we should get a call within 48 hrs to arrange. On Dec 17th (still no followup from GE) the DW leaked again - we video this time. On Dec 19th called customer relations and after much discussion it was apparent GE has NO CLUE what the heck they are doing. ONE MORE repair trip was scheduled - this time they would replace the inside and outside panel! We are fortunate to be retired otherwise this repair process would have cost us about $2000 so far! How idiotic is GE?? How much have they spent to avoid replacing this unit? Believe me this is the LAST GE appliance we buy from them. Dont know how they stay in business. We are awaiting the panel repair guy as of this writing. Will update once this service has been completed.

In January 2013, my husband and I purchased new appliances from Home Depot, including the above referenced dishwasher. The first dishwasher was delivered broken. The display panel was detached from the body of the dishwasher. At that point, I was concerned about the quality of the product. From the way it was detached, it appeared to be very cheaply made. (It was also installed incorrectly, causing a leak under our sink and ruining the bottom of our cabinetry. We settled this with Home Depot, but I include this detail to help emphasize my frustration over this whole situation.)When I contacted Home Depot about the faulty product, they agreed to provide a replacement, so I decided to give it another try. I wish now that I had simply returned the product and purchased another brand. Upon receiving the new dishwasher, I noticed immediately that the edge of the inner rack was scratched so badly that the plastic coating was gone, and rust had already begun to appear. I had to call customer service and get replacement racks. (More on this to follow.) Allow me to detail our service call records:Call #1. Heat dry didnt work at all. The technician told me that I needed to run the water in the sink and make sure it was very hot before running the dishwasher, and he changed the settings. This created a slight improvement, but not much.Call #2. Soon after, detergent tabs started to get stuck in the dispenser cups. I was using the exact brand recommended in the manual. The technician told me that detergent tabs were just the worst, and that I should try gel detergent, even though this is contrary to what the manual states. The detergent ruined my silverware, and I have had to purchase a new set, which I now hand wash.Call #3. Using gel detergent did not work. Technician came back, and told me the wrong replacement racks were sent. That must be what was blocking the water from getting to the soap. He ordered another replacement rack. He brought a plastic door, watched the water, and told me the upper arm wasnt spinning fast enough. He made an adjustment and claimed to fix that.Call #4. Detergent still not emptying from the cup. A different technician came back and used the plastic door. He found a different problem, but did not have the parts to fix it, so, another service call had to be scheduled.Call #5. Technician comes back, and finally fixes the detergent cup problem. For now.Call #6. Heat dry now does not work at all. There is so much water on the dishes that I have to hand dry them, and afterward, I have to mop my floor. There is just a massive amount of water in the dishwasher. In addition, it will not start except on a one-hour delay. Pushing the delay button does nothing to change the settings, and does not allow me to scroll through like it should. This appointment is scheduled for today, but I am not hopeful that anything will change.At this point, I have no faith that this dishwasher will ever work. Customer service did extend my warranty for six months, but that is the only concession I have gotten from them. That extension will expire soon, and I fear that at that point I will simply have to spend another $600 on a new dishwasher and leave this one on the curb. Its unacceptable for any consumer to have to purchase a new dishwasher less than two years after purchasing from GE.

This microwave is nearly 20 yrs old and is still working great. We replaced the handle but other than that it has been great. I would definitely recommend the GE brand as it has been very reliable. I give this product a great rating.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

Last fall, we updated our kitchen counters to quartz, and the Jenn-Air to a GE induction cooktop. While it is indeed pricey, the joy of cooking is not overstated here. The quick heat up, the ease of controlling the heat more precisely, and the easy clean up makes this unit well worth it. I love it!

We purchased our Adora over-the-stove microwave oven from Home Depot. The Adora brand is made exclusively for Home Depot and were sold on its special functions and value. Well now, 3 years later, this exclusive models glass fogs up when we use it. There are only 2 of us living at home. We use it maybe 4 or 5 times a day. A microwaves typical lifetime is 9 to 10 years. Also, by the way, when we turn on the fan to highest, it sounds like an express train hurtling through our kitchen. Our dog had a heart attack and died the first day we operated it. No he didnt. We dont even have a dog. But you get the picture.

I purchased a slate dishwasher in Oct, 2014. After the third cycle the soap would not dispense (door would not open) or the soap dribbled out and remained running down the door. I had to run the cycle twice to get the dishes clean and for the soap to dissolve. I called the store at which it was purchased. A tech came out and replaced a part. Did not work. After the second time, when the tech said nothing was wrong, even though he saw the soap running down the front door, I called GE. They sent a tech from a different store. After the eighth repair I told them I wanted it replaced. They had already replaced the soap dispenser twice, the control board and even told me to move the baskets (ridiculous). They also suggested I run hot water before the cycle! They said if it was repairable they could not replace it.We went back and forth with this and they finally agreed to replace it. Got the new slate dishwasher in July, 2015. After two cycles I started having the exact same issues! I will not deal with GE or ever buy another of their appliances. I will tell everyone I know not to deal with this company. Quality is terrible and service was extremely frustrating, having to take off work numerous times and wait hours for the service person. In the end, it never worked!

Purchased this item online and received delivery on 2/13/15 from P.C Richards. In less than a month after installation of the JVM7195SFSS microwave range oven the keypad stop working making it a useless tool taking space in my kitchen. Ive made more than 4 schedules for repair service. Its now May 15 Ive yet to see a repair person. Here are some of GEs lies for the past three months: GE parts were in back order; the service person claimed I wasnt home; I didnt pick up the phone. Even an appointment on my Sabbath was botched by the service person. While homebound recovering from surgery I called PC Richard who scheduled another service on 5/14/15 between 1-5pm. Still a no show. Yet PC Richards representative stated that the service person claimed that I wasnt home. The next morning 5/15/15 11:40am a service specialist named ** at ** extension ** calls stating the repairman is sick. Im confused! On what date was my repair? How do I get rid of this product installed in my kitchen wall? How do I get my money back? How do I make PC Richards and/or GE complete the repairs without losing a work day for foolishness or forsaking my Sabbath day again?

We bought our first home a couple of years ago, and it came with brand new appliances. Never in my mind did I think I would need to buy a new microwave after 2 years. Our GE microwave stopped working after 2 years. I had microwaves in past that lasted for 10 years or more. Never again will I buy a GE appliances again. The quality sucks. Don’t waste your money.

Adora Microwave - door falling apart: This microwave is supposed to be installed above a range. The materials are not suited to this. The plastic door has disintegrated. We have got through 2 handles. I took the 2nd one off to replace it and the plastic that holds the glass in place just disintegrated onto the floor along with much other plastic parts. Why is the door plastic in the first place if they cannot make it from a heatproof material? Only 4 years old and we are going to have to junk it. When the first handle failed under warranty GE said that it was not covered as it is a plastic part! They finally covered it after a long conversation.

Our microwave caught fire today and burned our kitchen, stove top, & attic. According to the Fire Captain, the cause of the fire was the GE microwave panel shorting out. Had my mom not been standing right there as it happened, our entire house would have surely been a loss.

I have a microwave that has a rack inside which gives you options other than using the rotating plate inside. Overall it works quite well. I did not purchase this microwave, it came with the apartment. Not sure if I would purchase this brand if I were to buy it for my own home.

Purchased my GE microwave roughly 2 years ago. Recently it started running with the door OPENED. I cannot get it to stop even when pressing the cancel button. This happened whether or not there was time remaining on the clock. I was very concerned about the microwave rays being harmful to my children. We unplugged it overnight, it worked for literally 2 minutes and then it would not even turn on. Model number HVM1540SN2SS. Pretty upset that I have to buy a new microwave already!! I was going to replace it with another GE microwave to match my other appliances, but after reading so many posts of other GE microwaves running with the door open I think I will slowly work GE appliances out of my kitchen.

I purchased a GE Spacemaker microwave in Jan. 2001. Shortly thereafter, the frame around the door cracked, becoming worse until in Oct 2006 I complained to GE. They sent a $75 credit towards another GE. I purchased another GE in Oct 2006. After a while, the handle became loose. Today, the handle broke off at the base where it attaches to the door, rendering the oven unusable. I dont have kids. This appliance was not abused. I see in looking through the comments that other consumers have had similar problems which would suggest a product defect. My next microwave will not be a GE.

Been using this microwave more than 3 years, more than happy with it. It has out performed all of my prior microwaves some costing much more. Will definitely re-purchase this brand again in the future.

My dishwasher is doing the same thing as the recalled models. The GE Cafe model is not included in the recall. The dishwasher front, which is stainless steel, becomes so hot it burns to the touch and stays that way for hours. Burning smell in the kitchen! Cafe models need to be added to the recall!

We purchased a GE Adora Dishwasher less than 6 years ago from Home Depot. An unknown continual leak has caused substantial black mold, warped sub flooring and cracking of very expensive Saltillo tile of which weve had to remove. GE should be accountable and will be. Nearly, a $800 Dishwasher will cost us thousands in repairs and mold abatement. Unbelievable.

We have a GE PROFILE dishwasher that has served us well for several years. Tonight, however, while it was doing the dishes the main circuit board caught fire. After turning the power off and trying to blow out the flame, we opened the door cover to find the main circuit board still smoldering. One of the relays on the circuit board had caught fire and started to burn through the circuit board melting it, the plastic cover and the wire harnesses. We were lucky to be home and awake when this happened and were able to take care of it. If we had been gone or asleep we probably would have lost our home!

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.

We have the dishwasher, fridge and stove from the GE Cafe series. In the 2 years that we have had them, we have become pretty acquainted with the local repair people because there hasnt been one month when all three were working at the same time. The fridge had to be replaced (we lost over $1000 in just food) - the replacement fridge had to be repaired. The customer service is awful. They are just trained NOT to be helpful. GE takes no responsibility for putting out such low quality, high priced appliances. I will never buy GE again and hopefully these reviews can save you the same grief and hopefully money (we have to pay for service repairs). Buy anything but GE, one star - is one too many!

Purchased new from Lowes. Dishwasher leaked starting less than a month after purchase. I have had it serviced 3 times since purchase and have another appointment scheduled. (It takes 2-4 weeks to get a tech out to your house). Currently they say he is going to come by on Tues and check to see which part to order next and then they will come back and work on the dishwasher when the part comes in. (Of course the dishwasher is leaking as I wait). They give a 8-5 service window so I will just have to sit here and wait on him to come by and decide what to order. This is pathetic. When you buy a new GE appliance you need to be aware that they literally do not have any program for replacing flawed appliances.

Our GE Dishwasher is about 22 months old and is now not starting. GEs customer care is a joke. All they want to do is send a repair person with a $110 fee just to come and the person making the appointment refused to tell what the labor rate would apply once they got there. They offered zero help as far as troubleshooting. I called a local repairman and was told he has had many similar issues with newer GE Dishwashers. We are throwing parts at the problem now trying to get it running. He also said repair assistance or troubleshooting from GE is very poor. Really not pleased having a less than 2 yr old major appliance not working. GE means JUNK to me.

After my previous GE Microwave had paint peeling, I was offered a new one at a discounted price. The new one will not make popcorn. It does heat water, but a small bag of popcorn takes 4-1/2 minutes for 1/2 bag. I called and they sent a repairman. He made a bag of popcorn, told us to use a different setting. Tried that and it still didnt work. Then he heated a half cup of water and declared it works fine. It does heat. It just wont make popcorn. He said they changed the design due to people starting fires making microwave popcorn, but that could just be a easy lie. Said There is nothing we can do about it. Just dont make popcorn, eat chips instead. What???

I have had a few cheap microwaves but at this point in my life I wanted to buy a good quality microwave that would last. Well I bought a 200 dollar GE microwave in February. 3 months later it went out on me. I did hard and soft reset numerous times with no success. They offered me a discounted check to replace it and it would take 4-6s weeks to receive. Instead we returned to place of purchase and they gave us a floor model to replace it. All was well for 2 months when lo and behold this one started doing the same thing. No amount of resetting would make it run. It went out cooking corn on the cob. Why is this so hard to keep running? Their response this time was a goodwill rebate certificate to purchase only a GE microwave. Why in heavens name would I want another one? It only lasts a couple of months and who is to say the 3rd replacement will not be the same.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

We purchased all GE Profile appliances when we built our house 4 years ago. The dishwasher, for the second time, has turned itself on and melted everything inside and got smoke in the house before we discovered it. I am afraid to have it repaired for fear that it will happen again when we’re not home or asleep. There seems to be a lot of people having this problem, yet I do not qualify for any recall that I can find. I am disjointed in GE to say the least.

Figure it out GE! The sixth motor and mode selector for our washer has been reluctantly ordered by a tech this morning. The second motor was installed months after buying the brand new machine. Now, only two months since the fifth motor and mode selector was installed (Dec 2, 2011), the wiring harness is burnt up. The tech recommends replacement of the washer by GE, but only gets push-back from GE. This newest incident included a horrific smell of smoke. I do not trust this machine. I have a wife and child to protect. Think about it - do the math - add your costs for repeated repairs. You do not get to be a company the size of GE by not understanding simple economics. Open your eyes and replace our washer.

Model #JVM1790SK01. High end GE Profile microwave/convection oven. Purchased and installed in 2009. First off the exhaust fan is terrible and is very noisy. The product itself worked well until recently when now the microwave heats intermittently, one time it will come on and heat, next time nothing. The fan runs, but no heating. The truly frustrating part is I need the front venting and no other units have the vents that blow the air outward, all the new units blow the air straight up your cabinets. Certainly a high end unit should last longer than 5 years with only two adults using it now and then. The cost of the service is outrageous and I surely would not use the $100 rebate on another GE product if they do not last any better than this one.

We wrote to GE regarding the issue with the dishwasher and, after some phone tag, a certified GE engineer came to the house, diagnosed the problem and ordered all the replacement parts. This morning, they came by to install and essentially rebuild the entire system with the exception of the stainless steel. Overall, we are very happy with the outcome. With all the negative issues GE experiences online with regard to the Cafe Series, I give them a solid 8 for responsiveness and taking care of the situation. Perhaps ours is a rarity, but if you approach them logically and with facts, they seem willing to work with the consumer. Heres hoping the system cleans better now too!

GE states they do not repair microwave ovens under warranty. Instead, they offer to reimburse you at MSRP for repurchasing the unit if you will show evidence you have ruined the units operational function. The interior bulb burned out in my unit, I disabled the unit, sent in pictures and receipt. They sent a coupon for about $30.00 less than MSRP and lied about the conditions of reimbursement. Brendia, the agent I spoke with, broke off email contact when I stated the unit was no longer available from the sellers on the GE seller list (including the seller I originally purchased from), and that the unit was only available at MSRP from the online sellers I could find. My microwave is inoperable and GE has not responded or offered to increase reimbursement to MSRP. I have not located a chain of command to whom I can report Brendias dishonest management of my case.

I am rating my over the counter GE microwave model no. JVM3160RFSS. Ive had it for over 2 years and its still performing well. Pros: Solid feel, sturdy door mechanism, easy to clean interior, attractive design, fairly quiet, adequate lighting inside, reasonable price, fan works okay for moderate smoke, short reheating times for lighter fare, cooks frozen foods quickly. The integrity of the interior is good with no chipping or cracking. Cons: Fan is inadequate for heavy smoke if searing beef, hot and cold spots while reheating heavier foods such as mashed potatoes or casseroles, controls are hard to see in dim or moderate light. A suggestion to GE would be to make microwaves with optional backlit buttons to see at nighttime or in dim lighting. I like that GE manufactures most of their microwaves in the United States.

This is the second GE microwave. In 2 years I have had that, the paint peeled off inside the microwave in sheets! I contacted GE the first time and was offered no help or explanation. I was told it was an older model, even though I bought it new. This time, I just chose to throw it away and never purchase another GE appliance again!

Were using a white GE Digital Microwave Oven at home Model No. JEI2870SPSS. We got it from Ansons a few months ago when our previous Kyowa was broken beyond repair. The price is reasonable, the usable space inside is adequate and the exterior design goes well with our kitchen. It has touchpad controls which are very easy to use especially with the pre-programmed settings like steam cook and snacks. So far it has worked very well. Its quite excellent at defrosting meat and evenly heats our food. We have no problem cleaning it and its pretty silent when in use. I hope this one lasts us longer since its pricier than the Kyowa and because use of the microwave less these days because they say the radio waves emitted by these machines cause cancer.

We purchased a new home with a GE Profile dishwasher installed. Since the day we had it, we have never been satisfied with the cleanliness of the dishes. They frequently come out covered in food and must be rewashed. We now routinely prewash everything in the sink and we always use the cookware setting to wash everything. Despite this, we still have to re-run loads because they are not clean.I am convinced that there is a design error with our dishwasher, because the top dish shelf obstructs the door of the soap compartment and prevents it from fully opening. After a load has run, you can still see leftover soap dried and crusted in the soap container. If the dishwasher cannot even wash the soap out of the soap compartment, no wonder our dishes are not clean.

My GE Profile Dishwasher was serviced 2 years ago for a faulty electronic control pad. It made starting the dishwasher a complete gamble, you never knew when it would actually turn on. I paid a couple hundred dollars to fix this problem 2 years ago and of course it has stopped working once again. So frustrating! GE decides to replace one bad part for another bad part. I then asked for the service call to be covered since it was obviously the same problem but they refused. So, GE am I to keep paying $89 for service fees so that you can keep replacing one faulty part for another? STAND BY YOUR PRODUCT!

I called to see if someone can help me figure out why my built in microwave is running but no heat. Apparently the customer service keeps insisting I need to schedule a service without offering any kind of help. Why do I have to pay for a service trip when I can fix it with the right part? Unlike other appliance they always have customer service helping to see and figure out what might be wrong to the appliance.

GE Cafe Microwave CVM2072SM2SS - The touchpad stopped responding, like many other who have had this issue. GE would not give me a break on replacing the main and supporting circuit panel as suggested by the technician, so I had to pay out $500 on my own. After less than a year now the microwave wont heat. I liked the units looks and display but if it wont work, its useless.

Nothing but trouble with dishwasher. GE service is a disaster. Design flaw that is forcing me to purchase another dishwasher. Dozens of call to and from service have not yielded any results. Finally a contracted repair person made it to repair dishwasher and told me it would fail again because of the design. Avoid GE appliances at all costs.

Installed by builder of home. Mid level SS model, very quiet. Does not dry dishes completely. LED lights on control panel remain on indicating cycle even when finished.

I had nothing but problems since day 1. The dishwasher has never cleaned dishes properly. We have to pre-scrub. The soap dispenser does not operate properly. The keypad stopped working after only 2 years.

Fourteen months after buying my new built-in GE Profile Microwave/Convection, it stopped heating. I was told by GE that it was not under warranty. I paid close to $300 to an appliance service operation locally to fix my nearly $1,000.00 GE built-in (depending on the microwave to help feed four kids under the age of nine). So, about 13 months later I had another heating issue and I called the appliance service operation and they found another problem with the microwave. They said it was a faulty piece of equipment, replaced it and didnt charge me since they were local and said this shouldnt have happened (knew I was recently divorced and took pity on me). Almost 18 months after this, so three years after the purchase, the microwave started to act up again - it continues to work even after you open the microwave. Just dealt with it since it still worked. However, 6 months later, the microwave now doesnt heat. The power is on, and nothing happens inside. This started a week ago, but it was off and on. Now its dead. Never buying a GE anything. Ive got to buy a microwave and a refrigerator in the next six months. It is NOT going to be a GE!

I have had the GE Profile for approximately 8 years with no Issues. I learn something new it will do every now and then I had no idea was possible. I stillHave not conquered the convection baking and that is my fault. I need to use it more often since it wouldn’t heat up kitchen like the range does especially these hot summer days in Texas.

New home community - all GE appliances. Model PEB7226SF2SS microwave scorching and catching on fire; GE doesnt stand behind their products and homeowners cant use because products our dangerous (per tech).

I purchased a full suite of GE Monogram Appliances about 5 years ago. All are fine except the microwave which was made in China. The back is rusting out, the inside is chipping at the door and moisture builds up in the door window. This progressive deterioration has taken place over the past 5 years. I paid $420 for the microwave plus $226 for the trim kit. Now, all GE wants to do is sell me a new unit and a new trim kit (will not fit old trim kit). I paid approximately $20,000 for the entire group. I bought GE because I trusted the name. Im stuck with GE if I want to match the remaining appliances. There are only two people living in this house so there is only minimal usage. To further complicate things, there is no serial number on the tag.

JVM6175SFSS - I purchased this over the stove Micro in July 2014. When I cooked a potato or frozen meal it would sound like it was going to explode. Condensation drips down behind my stove and the window and door to it get all steamed up. The fan clears the door & window but is very loud and intrusive even on low. Besides that I have never needed to use a fan when I use the microwave. GE repair came and said there was nothing wrong with it. But after thinking about it, came back the next day and took it apart. The tech called GE engineers and described to their amazement the way the inside was made. They said no way. So the tech took pictures and emailed them to GE. They reviewed it and said thats the way it is. I wouldnt stand for that and called them again and told them that the bottom of the micro gets scalding hot. At that they changed it out.... for another one with the same problem. The wall behind the stove is getting ruined from vapor dripping and all the same problems exist. They will be coming again and I am going to insist they take back their junker and let me buy a safe microwave of another brand even though my other appliances match. I am sorry now that I bought my GE stove and refrigerator now because they match the micro.

GE Profile GLD4408RBB: Bought this dishwasher at Home Depot 2010 for our FL condo. We visit there periodically, dont rent out. We have used this dishwasher probably 50 times since buying. It never wash dishes well, leaving residue and we do clean them first. Now it doesnt drain; seems like pump not working. Its only five years old and hardly used. Its not worth having a repairman for labor and cost of parts. Very disappointed with GE product and wont buy another one.

I own a GE counter-top sensor microwave oven model #JES1451, which was only 2 years old. At 3:00AM, I woke to a room full of smoke and a burning plastic smell. I immediately rushed to the source which was my microwave oven. It was going by itself and the panel read sensor error with smoke billowing out of it and flames erupting. Luckily, I had a fire extinguisher handy. I had never had any problems with this microwave prior to this experience. I cringe at the thought of what could have happened to my home and my family sleeping upstairs if I hadnt been nearby.

We have a lower end GE stainless steel model that came with the purchase of our new build home. The washer is just average and does not have a huge capacity. For only 2 people in the house it gets the job done in general.

Enamel curdles and becomes unattached from the ceilings of the interior of the microwave. Family member purchased 3-yr. newer model and the same thing happened. Theirs makes a terrible noise while cooking! Inferior product - inferior, unreliable materials!!! No accountability or sign of improvement! I will never buy a GE product again.

We purchased the entire line of slate/GE/Adora appliances from Home Depot 11 months ago. The fridge has required a service call for a VERY loud freezer. The microwave is fine. The stove/oven is fine. The dishwasher is a GIGANTIC piece of junk! 4 service calls and its still clunking, tapping, grinding and just extremely loud. VERY DISAPPOINTED!! We can only run it at night because of all the racket. The layout of the sections for dishes makes it totally useless inside. It doesnt clean. Soap residue is everywhere. My old DW was quieter and more efficient. *Insert sad face here.*

Ever since I bought this dishwasher in Jan 2014 it hasnt dried properly. Finally had a tech come out and he told me the water wasnt hot enough. How is it energy efficient if I have to raise the heat in my water heater to get the dishes to dry???? Very dissatisfied! My old dishwasher (with plastic lining) dried the dishes with no problem. I had it for 16 years before I had any problems with it. This new one is a problem from the first time I used it. No GE ever again!

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

I had my original microwave for 20+ years. I replaced it in 2009 with a GE Model HVM1540DN188. Started beeping in middle of night a week ago, with message keyboard shorted service needed. I unplugged several times and it would start coming on by itself. I cannot believe they dont warranty their shoddy keyboards. I am very angry. I think they should stand by and replace their keyboards free of charge since they are fully aware they are making deficient product. This is scary to have an appliance just start beeping and say shorted... luckily I had my original wired in microwave replaced and put in a plug in or I would have flipped out if I could not unplug it. I got this along with the GE stove... so far the stove is not beeping...

There was a recall on my fairly new dishwasher. The heater was causing fires. The repairman came and said I had to remove my ceramic tiles in front of the dishwasher for him to pull it out. I called customer service and a Tina offered to reimburse me $200 to have someone remove the tiles and pull the dishwasher out. I paid a handyman $250 in cash to have it done, called GE and they sent a man to fix it. I called again for my $200 and explained their man fixed it. They now wanted a bill from my floor man. I sent the bill and they refused to pay because the bill did not say paid. I called and asked them how their repair person could have fixed it if the floor had not have the tile removed and the dishwasher pulled out for him. I said, Ask your repair person to verify that the tile was removed. The answer was they couldnt ask him. I sent the bill again with a note saying paid in cash, a picture of the floor and a picture of me - a 74-year-old woman with a note saying it was impossible for me to have ripped up the ceramic tile and backer board myself. Again, I got a reply that the receipt that I sent was not acceptable and the case was closed.

We purchased a Profile Dishwasher, Stove, Oven and Microwave. So far weve had problems with all products especially the dishwasher. The bottom of the dishwasher is filled with water, the door has water running down the front and all dishes have to be dried. I have talked to GE and I was told the new models do not have a drying system as in the past due to EPA. I feel like we have spent thousands of dollars for items that are trash. Had I known I would be drying dishes I would never bought GE products. I would trade this GE for a SEARS in a minute but too late. Ill keep calling GE office, maybe a miracle will occur. Ive tried all the tricks in the handbook... doesnt work.

I purchased a this GE Model CDT845P2NS1 on Oct 2, 2019 and the unit was received Oct 23, 2019. I installed the unit approx. 4 days after receipt and dishwasher functioned well until November 10th, 2020 when the unit failed to pump out the water. I contacted GE Service (MabeService) and was advised that the unit was not under warranty and as such I should contact a GE Canada authorized service centre.After several attempts to get someone to come to our location at Sharbot Lake we got hold of Capital Appliance Repair in Ottawa. They were not able to send a technician until November 18th. After diagnosing the problem the technician advised we needed a main control board and would have to order one and then come back to do the install of the control board. It is now February 21st 3 months after the visit and I’m being told that the part is backordered and they have no idea when it will become available. I’m extremely unhappy when you spend over $7,000.00 for a GE CAFÉ gas stove, Microwave, Refrigerator and dishwasher to find out you cannot get parts in a timely manner. As a customer of GE Canada I have had no help is solving my problem. It is not acceptable to have a 1 year old dishwasher that has failed, much less waiting for repair that has taken over 90 days to get repaired. DO NOT BUY!

Ive been battling this dishwasher since it arrived 9 years-ago. It was a warranty replacement we were stuck with from GE. Plus, we paid $300. We could never get it to clean dishes, no matter how we loaded it or what we used, so we gave up and hand washed dishes for years. This year, I am committed to getting the dishwasher working because of hand eczema. I took it apart and cleaned the sprayer arms, filter & wiped it down completely. I also ran a dishwasher cleaner through it. I finally got it to clean dishes, but only if they are thoroughly rinsed first and on the Pots/Pans setting. After a month, it stopped cleaning my dishes again. I took apart the dishwasher again, and cleaned everything. Now, glasses on the upper rack in the back are not all getting clean. I never overload it. Im convinced that GE Dishwashers are just junk. Someday, Id love to find a dishwasher that actually works. :-( Frustrated!!!

My dishes always come out clean & the glassware always sparkles. I can use normal, heavy or light cycles. I can use heat to dry the dishes or turn that feature off & let them dry themselves. I think its just a normal size. Its white & matches my other appliances. This is the first GE Brand that Ive ever had. Ive had KitchenAid & Frigidaire models in the past and this one is as good as the others were.

Does not hold as many dishes, pots and pan as my previous dishwasher. In the bottom rack I cannot place plates and bowls side by side. Rack is too small and the gray interior is too dark. And the top rack does not hold the glasses in place, already had one break.

Great microwave I have had for almost 10 years. It works like new. Its a name you can trust and not expensive at all. I have always believed in the GE name and their products. I have a dishwasher and dryer that work just as well. I will continue to buy GE products.

I never imagined that a microwave in my new home would be rendered useless after 2.5 years. Like many of you, my control panel stopped working and the floor of the oven was extremely hot to touch. Heres the weird part. You can hit the number for timed cook, but youd have to let it heat the entire time. If you open the door, you cannot restart it. You have to unplug it to reset. Of course, I called GE customer service, who gave me the same spiel about $80 service call, plus repair and parts. Thanks to your candid remarks, I will not be purchasing another GE appliance.

My dishwasher is a GE Profile. It is as quiet as a Bosch we had in another home we had but it must cost half as much. We have it 8 years now- no problems. Never had a service call or anything wrong with it. It owes us nothing.

Slightly more than one year, I purchased a model GLD4404RCC dishwasher about which I have made complaints in the past, concerning poor washing performance and which you chose to ignore beyond attempting to tell me how to use it. Now, this Chinese-made piece of junk has begun to give different problems. Upon completion of the wash cycle, it starts to make a lot of noise and will not shut down. I must do this manually. Guess what? It has waited less than two weeks after the purchase date to do this, meaning it is out of warranty. We have just purchased a new home and will be needing new appliances such as dishwasher, refrigerator, washer and dryer, and a water heater. It will not be GE. I shall never purchase any more of GE products as the whole company stinks.

We are on our second GE Profile Series 60ssf dishwasher. The first one began to leak all over the floor. The store replaced it with a new one. We have had our present one about ten months. The first several months it did great and we loved it. The last two months we have noticed the dishwasher not drying our dishes. We have talked with the store several times to make sure we are doing all the right things. We are using sanitary level, power dry, Rinse Aid. We have had two technicians out and according to their computer it does not detect anything wrong. Interesting. The temperatures of the water quoted by the two were 60 degrees different. So what else is different? We received a call from supposed management of customer services saying, since the technicians could not find anything wrong, that we will have to live with whatever is going on. They will do nothing more.BUYER BEWARE! The GE brand used to be good, but not anymore. At least not in dishwashers. I definitely would not recommend this dishwasher to anyone even though it is top of the line, supposedly the best in proficiency. The unit has failed miserably, and the company had failed us miserably. We are left with a pile of junk!

I bought GE dishwasher model #GDF570SGJOCC from a local appliance dealer in April, 2017. The machine cost about $600, and $150 to install. Today I learned the circuit board is caput and it will cost $600 to replace it. I will never again buy a GE product-- 2 years of service and it needs to be replaced.

Called in for my washing machine and got service on my dishwasher??? With a bill of $207. A scam. Please take my advice and never call GE.

Microwave (over the stove model) is also supposed to be conventional oven, but does not do that well. Just use as microwave. As microwave, easy to use. Now 14 years old and still going strong, although a little dated in appearance. Grill cover looks like chrome, but made of plastic, and when I tried to remove it recently to change the filter, it broke and now has to be replaced. $180, but still cheaper than a new appliance. Wish we could get away from using plastic parts.

I have been trying to get this dishwasher to work since April. I have had it serviced 2x and yesterday the board was replaced. Soon after the dishwasher started to say the same thing again. Press start and the cycle is paused and will start in 3-2-1. it does not start but repeats and beeps over and over. I have done everything in my power to get this rectified. It will run out of warranty in October and I havent been able to use it. As a consumer I am demanding a usable product that I spent my hard earned money on. Here is the model CDT875P4N2W2. I will go to any lengths to get some attention in this matter and I hope Consumer Affairs can contact GE Corporate for me.Dr. David ** Lewes Delaware

It works great. My microwave is a small white one that has the power to heat or make a dinner. I enjoy using it. I just press how much time I need and the microwave turns on and it either warms up my meal or cooks it.

I like the design. The color works well in my kitchen and the oven works perfectly. It is just the right size and fits in the corner of my kitchen. I have no complaints.

I purchased my GE profile microwave in 2010 when my kitchen was being redone. I picked it for its style and the GE reputation. So far after 9 years, I hope this wont jinx me, it has been a wise choice. I use it daily.

I wish I had found this complaint section before I purchased my microwave. Bought model HVM1750DP1CC in May of 2010. Now, 3 years later, all of a sudden theres no power to the unit. The wall outlet is fine. There were no storms around here when it went out. It just seemed to fry itself! The repair/troubleshooting instructions tell you to get a licensed technician to check this and check that because of the voltage. They give you a flowchart to troubleshoot it yourself, but no pictures to go with the diagram. Sure I can check the fuses, if I knew where they are!GE - NEVER AGAIN FOR ME. Wish we still had good-valued products Made in the USA. This one is made in Malaysia. NOT WORTH IT. Time to sell the GE stock too. Their products suck and class action suits will probably follow. Kris is Pissed!

I love the GE. I bought a GE dual fuel range about 3 years ago when my 6 yr old Frigidaire stove caught fire. Always wanted to cook with gas but have electric oven and broiler. It's also easy to clean the cooktop unlike older gas stoves. Love the big fast boiler eye.

We purchased our GE Cafe stainless steel dishwasher in May of 2012. Periodically, it leaks around the bottom of the door. I have to put a plastic container on the floor to catch the water. This is bad enough and very disappointing, but the next and most important issue I have with it is the fact that it doesnt clean properly. I always, each and every load, rewash 3 to 4 items. The stainless handles also get very hot to the touch, which isnt very safe for a toddler. If I had the strength, Id pick it up and throw it out the back door. A dishwasher is designed to do one thing, wash dishes; its not a difficult concept. It is supposed to make life easier, not harder.

I recently purchased an Adora dishwasher from Home Depot. The price was enough to suggest that it should be a good dishwasher, but its the worst dishwasher Ive ever owned. It does not clean dishes and it takes two hours to do it.

GE microwave turns on by itself, creating a fire hazard. We could not figure out how our plastic plates melted, until we witnessed the GE microwave turning itself on by itself. Also filed a report with saferproducts.gov. It may have to take a death of a human to have this dangerous product recalled by GE. Great business plan, GE!

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

I have had it with GE! Only 18 months after install, my beautiful, stainless, three-rack, GE, top-dollar dishwasher will not turn on. Repair attempts have been futile. Tech said not to expect more than seven years service out of new appliances. Were tossing this junk and buying CHEAP replacements going forward since all we have to choose from is throw away products. OEMs like GE should realize they are shooting themselves in the foot with their planned obsolescence business plan.

I like my microwave. It works alright but the fan on it is extremely noisy. This is the first GE microwave that is so noisy. Besides that it defrost food well, I like the different functions on this microwave. They work great.

I owned this microwave for the last 5 years. Easy to installed, good appearance, stainless steel, easy to operate but fancy enough to prepare different meals to include the younger ones. Lighting very good and vent excellent.

Its an older Hotpoint, and the layout is fairly roomy for a dishwasher of its size. The last apartment I was in had a comparably sized dishwasher that had too many shelving elements that got in the way of being able to just shove some dishes in there. Ive discovered with this dishwasher I need to stick to powdered detergent because the Hotpoint doesnt fully dissolve tablets. It does a fine job overall, though.

I bought a brand new GE Spacesaver OTR mount Microwave (Model # jnm1851dmbb) and had installed in my new home by the appliance shop where I purchased it in November, 2010. I am a widow and I use the microwave maybe 3-4 times per week, and take very good care of it. I went to steam some fresh veggies this evening and the whole unit just went dead. There’s no fan, light, or keypad. It is plugged in and I did not blow a fuse or switch. I checked them all. It’s just plain broken after less than 2 years of very light use. It’s a piece of junk! I’ll be buying another brand this time. I will never buy a GE again! It’s a junk, junk and junk!

Ive used this GE model JES2051DN1BB (manufacturer date August 2008) microwave for ten years now and impressed that it is still working perfectly cause you dont see that much anymore. I usually prefer Maytag products cause my GE washer and dryer did not last for me, but this has seem to be different. Maybe GE should stick to making microwave ovens instead of anything else.

The looks are ok. It works great, not too noisy. Wouldn’t mind replacing it with a different color and apparel. It fit great over the oven and is a space saver. Cleans up well, not too hard to clean. Not sure of the exact price, but I remember it was very cost efficient

First of all, I wish I had seen this site over two years ago and I wouldnt have purchased a GE product. But, that is spilled milk. My two year old microwave, GE 1750 over the range, started running on its own. I disconnected it and called GE and asked if they had experienced any problems with their product and if this was a fire hazard, the nice young lady put me on hold and did research and stated that no reports of a fire hazard or running on its own. My husband encouraged me to do my own research and guess what? shocking, I was lied to! There are reported fires on the news and a law firm has a class action lawsuit against GE! I guess because this appliance wasnt in the nice young ladys moms house it wasnt of importance to inform me of the fire hazard? GE is off of my list of products I would buy!

Absolutely silent! Several features and cycles such as crystal, normal, pots and pans and drying options such as air dry or heat dry. Standard size dishwasher. The key is in the loader. Stainless steel with no handle or anything plastic. Flush. Stainless interior as well. It did have a food disposal but to avoid smells since we start the dishwasher only twice a week, we rinsed off our dishes. Another important element we learned from the previous dishwasher is to use the heat dry if you want your load to be dry with as little puddles of water as possible.

We bought a GE Profile micro/convection oven in December 2010 (model # PEB1590SM). It was working great until 11-19-2012, when the panel on the right side started to glow bright orange, then burst into flame. I thought my wife was goofy, so I tried to heat a cup of water. It was the same thing; the panel glowed bright orange and then flamed. We waited a week for a GE tech to visit. He said the wave guide is burnt. Its non-repairable so were waiting for disposition from GE service. There wont be another GE micro in this house. P.S. - Were still waiting for the GE case manager to call back after leaving three messages.